Documente Academic
Documente Profesional
Documente Cultură
1XKAD69X6XR819066 2:29 pm
Manufacturer: Kenworth
Model Year: 1999
Vehicle Components
Faults
Active Brakes SAE - Wheel Sensor ABS Axle 2 Left - SID 3 5 N/A
Current below normal or open circuit
Active Brakes SAE - Pressure Modulation Valve ABS Axle SID 10 5 94
2 Right - Current below normal or open
circuit
Active Brakes SAE - Tractor ABS Warning Light Bulb - SID 23 5 N/A
Current below normal or open circuit
Active Engine No current detected at number 3 injector 324 SID 3 5 N/A
return pin 12 of the actuator harness
connector when the voltage supply at pin 3
of the actuator harness connector is on.
Active Engine SAE - Injector Cylinder #10 - Current below SID 10 5 94
normal or open circuit
Active Engine SAE - Rack Actuator - Current below normal SID 23 5 N/A
or open circuit
Inactive Engine Engine speed signal on pins 1 and 15 and/or 234 PID 190 0 4
pins 11 and 14 of the sensor harness
connector indicated engine speed is greater
than 2630 rpm.
Inactive Engine Battery voltage at pins 20, 21, 22, and 23 of 434 SID 251 4 8
actuator harness connector (relative to
return pins 9, 25, and 27 of the actuator
harness connector) fell below 6.2 VDC for a
fraction of a second or electronic control
module (ECM) was not allowed to power
down correctly (retain the battery supply
voltage for 3 seconds) after keyswitch OFF.