Documente Academic
Documente Profesional
Documente Cultură
1. Extract the files in Sp Flash Tool.zip file and then execute Flass Tool.exe
2. Now in the Smart Phone Flash Tool Window click on Scatter Loading button
and then select MTK Android Scatter emmc.txt file.
3. Now youll see several entries in the list in Smart Phone Flash Tool window.
You need to only select theRecovery - see image below.
4. Now click on Recovery button on the SPFT window and then locate
the recovery.img you downloaded earlier.
5. Now go to Flash tools and Click on USB mode to check and enable it. Now go
to Options > DA Download All > Speed > Force to High Speed.
6. Take out battery and SIM of your Micromax HD A116.
7. Now click on Download button on the Smart Phone Flash Tool window. Ignore
all warnings and hit YES.
8. Now you need to insert the battery and Connect your Phone to your PC via
USB cable while holding theVolume Up key. The flashing process will start.
[alert style="green"] Interrupting the Process can lead to bricking your Phone.
[/alert]
9. After the process ends youll see a green ring on your phone which indicates
that the process was successful.
10. Now reboot your phone in to Recovery Mode. To do so, press and hold the
Volume Up + Volume Down +Power key. Choose the recovery mode on next
screen and you should see CWM Recovery on your Micromax Canvas A116 HD.
After installing CWM recovery lets Root Micromax A116 now.
*You can ignore this* OLD METHOD: (use this if you have a lot of time to waste )
Get "Motochopper, developed by djrbliss" for rooting Motorola devices. It works on most devices
running Jelly bean 4.1 and above.
Original post (requires logging in) / Thread on XDA / # Alternate Download (Mirror)#
1. Any Phone with MediaTek MTK6589 Processor and Jelly Bean 4.1+
2. Drivers for ADB (connects the pc with the phone through USB Debugging) - there are many
sources to get these drivers. If you're running the stock micromax firmware, it's found onboard
when you connect the usb. For others running custom firmware, you could download
from moulnisky.com. Even windows update might automatically install these drivers for you, but
it's time consuming. After you've installed this, proceed to the next step to find out if you've
established a proper connection between phone and pc.
3. Connect the phone to PC via USB cable and run the motochopper (run.bat file). press ok. then
connect the phone to pc and enable USB debugging from the developer tools. Now the tool
should push the exploit and root your phone. if no device is detected, go back to step two and
install the correct drivers. if it's done, you're a superuser.
Note: In Android 4.2, Developer Tools will be hidden by default. You'll have to enable it first. For
that, Go to Settings > About Phone > Build Number > Tap 7 Times.
Download Links:
MOTOCHOPPER ROOT TOOL
ADB DRIVERS
Installation Guide:
Install ADB drivers in your pc, to get your mobile detected (It will
work both in Windows 7- 64 Bit & 32 Bit operating system).
Extract the Motochopper Root Tool from winrar to your Desktop.
Keep your Canvas HD on, dont switch off your mobile & then
connect the phone to PC as MTP (Media Storage) and enable USB
debugging. Now open the Motochopper root tool folder and
run the run.bat file as administrator (given below in screen shots) &
press any key and you are done within few seconds.
REQUIREMENTS:
A Micromax Canvas HD A116 with usb data cable
Please ensure that the battery of your device is above 75%, so you don't get
sudden shut down during our process.
Take full backup of your device.
Backup data like SMS, contacts, whatsapp data etc etc., as these would be
formatted during the process.
Install the drivers of Micromax Canvas HD from the official Micromax website.
Download Jelly Bean OS ROM & SP FLASH TOOLS, that you will flash.
Link for ROM Version 4.2.1:
http://www.moulnisky.com/downloads/Micromax/A116/Software
%20version/V3_270513%28Jelly%20bean
%204.2%29/S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER.rar
INSTALLTION NOTE:
1. Install drivers - Mobistel_Cynus_T1_Drivers_x86
2. Open SP_Flash_Tool_v3.1304.0.119
3. Select Scatter file from the downloaded ROM version 4.2.1 (extract
downloaded file from winrar to different folder) and tick all files.
4.Goto options->select usb & select USB Mode & DA Download All - & select force to
High Speeds
5. Remove battery, Sim Cards & Memory Card
5. Insert USB data cable to PC & connect your phone & flash tool will detect your
phone & downloading start automatically
5. Remove the cable from your phone insert battery & restart your phone.
5. It will take some times while re-starting and there will be TP Update pop up. *
5. You are done & you can insert sim cards & memory card.
[NOTE:]
After Flashing and updating from 4.1.2 to 4.2.1 there will be a TP
UPDATE pop up which will update the TP automatically. So it
is advised DON'T TOUCH PHONE's SCREEN ON FIRST
BOOT (don't even press the OK button), LET THE TP
UPGRADE DO HIS WORK, WAIT FOR AT LEAST 10-15
MINUTES BEFORE DOING ANYTHING.
CHECK HOW TO ROOT MMX CANVAS HD
TO 4.2.1 WITHOUT EVEN USING FLASH
TOOLS- THE EASIEST WAY ON THE NET
@ http://q.gs/4Y2Q9