Documente Academic
Documente Profesional
Documente Cultură
Getting Started Listening to the radio If the USB device has more than one memory (for
example, internal memory and a memory card), you can
1 Select TUNER FM or TUNER AM. select which memory to use and then start playback.
Press TUNER/BAND repeatedly. You cannot select a memory during playback. Make sure
to select a memory before starting playback.
2 Perform tuning. Use buttons on the unit to select a memory on the USB
device.
For automatic scanning
Press TUNING MODE repeatedly until AUTO 1 Press FUNCTION repeatedly to select the USB
appears, and then press +/ . Scanning stops function.
automatically when a station is tuned in, and 2 Connect the USB device to the (USB) port .
TUNED and ST (for stereo programs only) light
up in the display.
3 While holding down ENTER , press .
4 Press / repeatedly to select a memory
number.
Proceed to step 5 if only one memory can be selected.
To cancel this operation, press .
If TUNED does not light up and the scanning does
not stop, press to stop scanning, then perform 5 Press ENTER .
manual tuning (below). Notes
When you tune in a station that provides RDS When USB cable connection is necessary, connect the USB cable
services, the station name appears on the display supplied with the USB device to be connected. See the operation
(European model only). manual supplied with the USB device to be connected for details on
Remote FM lead antenna (Extend it horizontally.) Speaker cord (Red/) the operation method.
It may take about 10 seconds before READING appears depending
AM loop antenna Speaker cord (Black/) For manual tuning on the type of USB device connected.
To right speaker To left speaker Press TUNING MODE repeatedly until Do not connect the system and the USB device through a USB hub.
To wall outlet MANUAL appears, and then press +/ When the USB device is inserted, the system reads all the files on the
repeatedly to tune in the desired station. USB device. If there are many folders or files on the USB device, it
To cancel Program Play remaining playing time for a track. system are numbers and alphabets only. Other Do not clean discs with solvents, such as benzine, 531 kHz 1,602 kHz (9 kHz step)
ID3 tag information for MP3 files when ID3 version 1 and The clock setting or the Play Timer operation thinner, or commercially available cleaners or anti- Australian model:
characters are not displayed correctly.
Press PLAY MODE repeatedly until PGM version2 tags are used (ID3 version 2 tag information display has has been cancelled unexpectedly. To turn off the automatic standby function static spray intended for vinyl LPs.
531 kHz 1,710 kHz (9 kHz step)
530 kHz 1,710 kHz (10 kHz step)
disappears while the player is stopped. priority when both ID3 version 1 and version 2 tags are used for a If about a minute elapses with no operation, the clock This system is equipped with an automatic standby
single MP3 file).
The USB device is not recognized. Do not expose discs to direct sunlight or heat sources Latin American models:
setting or Play Timer setting is cancelled automatically. Turn off the system and reconnect the USB device, then function. With this function, the system enters standby such as hot air ducts, nor leave it in a car parked in
530 kHz 1,710 kHz (10 kHz step)
To delete the last track or file of the program up to 32 characters of ID3 tag information using uppercase letters 531 kHz 1,710 kHz (9 kHz step)
Perform the operation again from the beginning. turn on the system. mode automatically in about 30 minutes when there is no direct sunlight.
Press CLEAR while the player is stopped. (A to Z), numbers (0 to 9), and symbols ( $ % ( ) * + , . / < = > Other models:
@ [ \ ] _ ` { | } ! ? ^ ~). Check the information on the websites about operation or audio signal output. 531 kHz 1,602 kHz (9 kHz step)
There is no sound. By default, the automatic standby function is turned on. On safety 530 kHz 1,610 kHz (10 kHz step)
To view program information, such as total compatible USB devices with URLs listed under Antenna: AM loop antenna
track number of the program Are the + and speaker cords short-circuited? Playing a file of the USB device. Use buttons on the unit to turn off the automatic standby Completely disconnect the power cord (mains lead) Intermediate frequency: 53 kHz
Press DISPLAY repeatedly. Are you using only the supplied speakers? The USB device does not work properly. Refer to the function. from the wall outlet (mains) if it is not going to be used
Using the timers
USB section
Is anything blocking the ventilation holes of the system? USB device operation manual for how to deal with this Hold down while the system is on, until for an extended period of time. When unplugging the Supported bit rate:
MP3 (MPEG 1 Audio Layer-3): 32 kbps 320 kbps, VBR
The specified station may have temporarily stopped problem. AUTO. STBY OFF appears. unit, always grip the plug. Never pull the cord itself.
The system offers two timer functions. If you use both Sampling frequencies:
timers, the Sleep Timer has priority. broadcast. Should any solid object or liquid get into the system, MP3 (MPEG 1 Audio Layer-3): 32/44.1/48 kHz
To turn on the function, repeat the procedure until
Using optional audio components Play does not start. AUTO. STBY ON appears.
unplug the system, and have it checked by qualified (USB) port: Type A, maximum current 500 mA
Sleep Timer: Sound comes from one channel, or the left and Turn off the system and reconnect the USB device, then personnel before operating it again. Speaker
1 Prepare the sound source. You can fall asleep to music. This function works even if right volumes are unbalanced. turn on the system. Notes The AC power cord can be changed only by a qualified
Speaker system: Full range, 8 cm dia., cone type
Rated impedance: 4 ohms
Place the speakers as symmetrically as possible. AUTO STANDBY lights up in the display when the automatic service facility.
Connect additional audio component to the AUDIO the clock is not set. Check the information on the websites about standby function is turned on.
Dimensions (W/H/D): Approx. 148 mm 240 mm 127 mm
Mass: Approx. 1.23 kg net per speaker
IN jack on the unit using an audio analog cord Press SLEEP repeatedly. If you select AUTO, the Connect only the supplied speakers. compatible USB devices with URLs listed under The automatic standby function is invalid for the tuner functions
(not supplied). system automatically turns off after the current disc or Playing a file of the USB device. On placement General
(FM/AM), even when AUTO STANDBY lights up in the display.
USB device stops, or within 100 minutes. Severe hum or noise. Press to start playback. The system may not enter standby mode automatically in the Do not place the system in an inclined position or in Power requirements:
2 Turn down the volume. Move the system away from sources of noise. following cases; locations that are extremely hot, cold, dusty, dirty, or
European and Russian models: AC 230 V, 50/60 Hz
Australian model: AC 230 V 240 V, 50/60 Hz
Press VOLUME . Play Timer: Connect the system to a different wall outlet. Play does not start from the first track. when an audio signal is detected. humid or lacking adequate ventilation, or subject to Latin American models (except for Brazilian, Mexican and Argentine
when a USB device is connected. vibration, direct sunlight or a bright light. models): AC 110 V 120 V or 220 V 240 V, 50/60 Hz, adjustable with
3 Select the AUDIO IN function. You can wake up to CD, FM/AM reception or USB device Install a noise filter (available separately) to the power Set the play mode to Normal Play mode. voltage selector
during playback of audio tracks or files. Be careful when placing the unit or speakers on
at a preset time. cord. Brazilian model: AC 127 V or 220 V, 60 Hz, adjustable with voltage selector
Press FUNCTION repeatedly. while the preset Play Timer or Sleep Timer is in process.
Make sure you have set the clock. Files cannot be played back. surfaces that have been specially treated (for example, Mexican model: AC 120 V, 60 Hz
Argentine model: AC 220 V, 50/60 Hz
4 Start playback. The remote does not function. The MP3 file does not have the extension .mp3. with wax, oil, polish) as staining or discoloration of the
1 Prepare the sound source. surface may result.
Models for Middle and Near East: AC 110 V 120 V or 220 V 240V,
Start playback of the connected component and adjust Remove any obstacles between the remote and the The data is not stored in MP3 format. 50/60 Hz, adjustable with voltage selector
Prepare the sound source, and then press VOLUME
Messages If the system is brought directly from a cold to a warm Korean model: AC 220 V, 50/60 Hz
the volume. remote sensor on the unit, and position the unit USB storage devices formatted with file systems other Taiwan model: AC 120 V, 50/60 Hz
+/ to adjust the volume. away from fluorescent lights. location or is placed in a very damp room, moisture
Note than FAT16 or FAT32 are unsupported.* Thai model: AC 220 V, 50/60 Hz
To start from a specific CD track or audio file, create Point the remote at the systems sensor. may condense on the lens inside the CD player, and Other models: AC 220 V 240 V, 50/60 Hz
The system may enter standby mode automatically if the volume If you use a partitioned USB storage device, only files Power consumption:
your own program. CANNOT PLAY : You tried to play an unsupported file on cause the system to malfunction. In this situation,
level of the connected component is too low. Adjust the components Move the remote closer to the system. on the first partition can be played. European and Russian models: 28 watts
the USB device. remove the disc, and leave the system turned on for
volume accordingly. See To turn off the automatic standby function. 2 Select the timer set mode. Files that are encrypted or protected by passwords, etc. about an hour until the moisture evaporates.
Latin American models (except for Mexican and Argentine models):
28watts
DATA ERROR : You tried to play an unplayable file on the
Press CLOCK/TIMER SET . CD/MP3 player cannot be played back.
USB device.
Models for Middle and Near East: 28 watts
Other models: 25 watts
3 Set the play timer. * This system supports FAT16 and FAT32, but some USB storage On heat buildup
The sound skips, or the disc will not play. devices may not support all of these FAT. For details, see the DEVICE ERROR : The USB device could not be Dimensions (W/H/D) (excl. speakers):
Adjusting the sound Press / repeatedly to select PLAY SET, Wipe the disc clean, and replace it.
operation manual of each USB storage device or contact the recognized or an unknown device is connected.
Heat buildup on the unit during operation is normal
and is not cause for alarm.
Approx. 158 mm 240 mm 225.5 mm
Mass (excl. speakers): Approx. 2.1 kg
then press ENTER . manufacturer.
Move the system to a location away from vibration (for FULL : You tried to program more than 25 tracks or files
To Press Do not touch the cabinet if it has been used Supplied accessories: Remote Commander (1), FM lead/AM loop antenna (1)
4 Set the time to start playback. example, on top of a stable stand). (steps).
Adjust the volume VOLUME +/ . Tuner continuously at a high volume because the cabinet may Design and specifications are subject to change without notice.
Move the speakers away from the system, or place them NoDEVICE : No USB device is connected or the have become hot.
Press / repeatedly to set the time, then
Generate a more DSGX on the unit. on separate stands. At high volume, speaker vibration connected USB device has been stopped.
press ENTER . Severe hum or noise, or stations cannot be Do not obstruct the ventilation holes.
dynamic sound may cause the sound to skip. NO DISC : There is no disc in the player, or you have Standby power consumption: 0.5 W
(Dynamic Sound 5 Use the same procedure as in step 4 to set the time received. (TUNED or ST flashes on the loaded a disc that cannot be played. Halogenated flame retardants are not used in the certain printed
display.) On the speaker system
Generator X-tra) to stop playback. Play does not start from the first track. NoMEMORY : The memory selected for playback has no wiring boards.
This speaker system is not magnetically shielded, and
EQ . Connect the antenna properly. memory media inserted in the USB device.
Set the sound 6 Select the sound source. Return to Normal Play by pressing PLAY MODE the picture on nearby TV sets may become magnetically
effect repeatedly until both PGM and SHUF disappear. Find a location and an orientation that provide good NO STEP : All of the programmed tracks have been distorted. In this situation, turn off the TV, wait 15 to
Press / repeatedly until the desired sound reception, and then set up the antenna again.
source appears, then press ENTER . erased. 30minutes, and turn it back on.
Starting playback takes more time than usual. Keep the antennas away from the speaker cords and the NO SUPPORT : An unsupported USB device is If there is no improvement, move the speakers far away
7 Turn off the system. The following discs can increase the time it takes to power cord to avoid picking up noise. connected. from the TV.
Press . The system turns on 15 seconds before start playback; Turn off nearby electrical equipment. NO TRACK : Playable file on the USB device is not loaded
the preset time. a disc recorded with a complicated tree structure. in the system. Cleaning the cabinet
a disc recorded in multisession mode. Several radio stations can be heard at the same Clean this system with a soft cloth slightly moistened
If the system is on at the preset time, the Play Timer NOT USED : You tried to perform a specific operation
time. with a mild detergent solution. Do not use any type
will not play. Do not operate the system from the time a disc that has not been finalized (a disc to which data under conditions where that operation is prohibited.
the system turns on until the playback starts. can be added). Find a location and an orientation that provide good of abrasive pad, scouring powder, or solvent, such as
reception, and then set up the antenna again. OVER : You have reached the end of the disc while
a disc that has many folders. pressing during playback or pause. thinner, benzine, or alcohol.
To check the setting Bundle the antenna cables using commercially available
cord clips, for example, and adjust the cable lengths. PUSH SELECT : You tried to set the clock or timer during
1 Press CLOCK/TIMER SELECT . USB device timer operation.
2 Press / repeatedly to select PLAY SEL, PUSH STOP : You pressed PLAY MODE during
The connected USB device cannot be charged. To change the AM tuning interval (except playback.
and then press ENTER .
Make sure the USB device is connected securely. models for Europe, Russia, Saudi Arabia, SET CLOCK : You tried to select the timer when the clock
To cancel the timer If you have turned off the CD player/USB device power, Kuwait and Egypt) is not set.
Repeat the same procedure as above until OFF appears select a function other than the tuner function, or turn The AM tuning interval is factory-preset to 9 kHz (or SET TIMER : You tried to select the timer when the Play
in step 2, and then press ENTER . on the CD player/USB device power. See To improve 10kHz for some areas). Timer is not set.
tuner reception. Use buttons on the unit to change the AM tuning TIME NG : The Play Timer start and end times are set to
To change the setting interval. the same time.
Start over from step 1. Are you using a supported USB device?
If you connect an unsupported USB device, the 1 Tune in any AM station, and then turn off the
Tip system.
The Play Timer setting remains as long as the setting is not cancelled
following problems may occur. Check the information
manually. on the websites about compatible USB devices with 2 Press DISPLAY to display the clock.
URLs listed under Playing a file of the USB device.
The USB device is not recognized. 3 While holding down , press .
File or folder names are not displayed on this system. All the AM preset stations are erased. To reset the
Playback is not possible. interval to the factory preset, repeat the procedure.
The sound skips.
There is noise.
A distorted sound is output.