Documente Academic
Documente Profesional
Documente Cultură
2
Published January 2017
Copyright2017 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
X370 Killer SLI/ac / X370 Killer SLI
Motherboard Layout
1 2 3 4 5
CPU_OPT/W_PUMP
Keyboard
Mouse
PS2
PS2
CPU_FAN1
HDMI1
USB 3.0
T: USB1 SOCKET AM4
ATXPWR1
B: USB2
USB 3.0
T: USB3 6
B: USB4
USB 3.0
T: USB3_TA_1
B: USB3_TC_1
USB 3.0
Top:
T: USB5
RJ-45 LAN 7
USB3_9_10
B: USB6
Central/Bass
Top:
PCIe Gen3 x4
REAR SPK
Center:
SPDIF
Optical
Bottom:
Ultra M.2
1
M2_3
MIC IN
Bottom:
LINE IN
Top:
FRONT
Center:
USB3_7_8
NUT1
8
1
M2_1
PCIE1 USB_5
1
9
AMD_FAN_LED1
AUDIO
1 10
CODEC
PCIE2
11
CHA_FAN1
SATA3_5_6
BIOS
ROM 12
AMD
PCIE3 Promontory
SATA3_3_4
X370
13
RoHS
SATA3_1_2
PCIE4 14
M2_2
PCIE5
Super
I/O CMOS
PCIE6 Battery
CHA_FAN2 CHA_FAN3/W_PUMP
HD_AUDIO1 COM1 TPMS1 USB_3_4 USB_1_2 PLED PWRBTN
SPK_PLED1
CLRMOS1 RGB_LED2 RGB_LED1
1 1 1 1 1
1 1 1 1
1 HDLED RESET
PANEL1
26 25 24 23 22 21 20 19 18 17 16 15
English
1
No. Description
1 ATX 12V Power Connector (ATX12V1)
2 CPU Fan Connector (CPU_FAN1)
3 CPU Fan / Waterpump Fan Connector (CPU_OPT/W_PUMP)
4 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
5 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
6 ATX Power Connector (ATXPWR1)
7 USB 3.0 Header (USB3_9_10)
8 USB 3.0 Header (USB3_7_8)
9 AMD LED Fan USB Header (USB_5)
10 AMD Fan LED Header (AMD_FAN_LED1)
11 Chassis Fan Connector (CHA_FAN1)
12 SATA3 Connectors (SATA3_5_6)
13 SATA3 Connectors (SATA3_3_4)
14 SATA3 Connectors (SATA3_1_2)
15 System Panel Header (PANEL1)
16 RGB LED Header (RGB_LED1)
17 RGB LED Header (RGB_LED2)
18 Clear CMOS Jumper (CLRMOS1)
19 Chassis Fan / Waterpump Fan Connector (CHA_FAN3/W_PUMP)
20 Chassis Fan Connector (CHA_FAN2)
21 USB 2.0 Header (USB_1_2)
22 USB 2.0 Header (USB_3_4)
23 Power LED and Speaker Header (SPK_PLED1)
24 TPM Header (TPMS1)
25 COM Port Header (COM1)
26 Front Panel Audio Header (HD_AUDIO1)
English
2
X370 Killer SLI/ac / X370 Killer SLI
I/O Panel
3 5
1 2 4 6
16 15 14 13 12 10 9 8 7
11
* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
3
** If you use a 2-channel speaker, please connect the speakers plug into Front Speaker Jack. See the table below
for connection details in accordance with the type of speaker you use.
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find the Mixer tool on your
system. Please select Mixer ToolBox , click Enable playback multi-streaming, and
click ok. Choose 2CH, 4CH, 6CH, or 8CH and then you are allowed to select
Realtek HDA Primary output to use the Rear Speaker, Central/Bass, and Front Speaker,
or select Realtek HDA Audio 2nd output to use the front panel audio.
English
4
X370 Killer SLI/ac / X370 Killer SLI
Chapter 1 Introduction
Thank you for purchasing ASRock X370 Killer SLI/ac / X370 Killer SLI
motherboard, a reliable motherboard produced under ASRocks consistently
stringent quality control. It delivers excellent performance with robust design
conforming to ASRocks commitment to quality and endurance.
Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any modi-
fications of this documentation occur, the updated version will be available on ASRocks
website without further notice. If you require technical support related to this mother-
board, please visit our website for specific information about the model you are using. You
may find the latest VGA cards and CPU support list on ASRocks website as well. ASRock
website http://www.asrock.com.
5
1.2 Specifications
module
15 Gold Contact in VGA PCIe Slot (PCIE2)
6
X370 Killer SLI/ac / X370 Killer SLI
7
6 x USB 3.0 Ports (Supports ESD Protection)
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
HD Audio Jacks: Rear Speaker / Central / Bass / Line in /
Front Speaker / Microphone (Gold Audio Jacks)
8
X370 Killer SLI/ac / X370 Killer SLI
9
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using third-party
overclocking tools. Overclocking may affect your systems stability, or even cause damage to
the components and devices of your system. It should be done at your own risk and expense.
We are not responsible for possible damage caused by overclocking.
English
10
X370 Killer SLI/ac / X370 Killer SLI
English
11
WiFi Antennas Installation Guide
Step 1
Prepare the WiFi 2.4/5 GHz Antennas that come
with the package.
Step 2
Connect the two WiFi 2.4/5 GHz Antennas to
the antenna connectors. Turn the antenna clock-
wise until it is securely connected.
Step 3
12
X370 Killer SLI/ac / X370 Killer SLI
Chapter 2 Installation
This is a ATX form factor motherboard. Before you install the motherboard, study
the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard.
Failure to do so may cause physical injuries to you and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboards components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.
English
13
2.1 Installing the CPU
2
English
14
X370 Killer SLI/ac / X370 Killer SLI
English
15
2.2 Installing the CPU Fan and Heatsink
After you install the CPU into this motherboard, it is necessary to install a larger
heatsink and cooling fan to dissipate heat. You also need to spray thermal grease
between the CPU and the heatsink to improve heat dissipation. Make sure that the
CPU and the heatsink are securely fastened and in good contact with each other.
Please turn off the power or remove the power cord before changing a CPU or heatsink.
2
English
16
X370 Killer SLI/ac / X370 Killer SLI
4
English
N1
FA
U_
CP
17
Installing the AM4 Box Cooler SR2
2
English
18
X370 Killer SLI/ac / X370 Killer SLI
English
19
4
1N
FA
U_
CP
D1
_L E
FAN
+12V AM
D_
English
*The diagram shown here are for reference only. Please refer to page 33 for the orientation of
AMD Fan LED Header (AMD_FAN_LED1).
20
X370 Killer SLI/ac / X370 Killer SLI
2
English
21
3
22
English
X370 Killer SLI/ac / X370 Killer SLI
N1
FA
U_
CP
English
23
6
1N
FA
U_
CP
1
_LED
+12V
AN
D_F
AM
or
7
1N
FA
U_
CP
1
_LED
AN
D_F
AM
_5
USB
Please note that only one cable should be used at a time in this step.
English
If you select AMD_FAN_LED1, please install ASRock utility "ASRock RGB LED".
If you select USB connector, please install AMD utility "SR3 Settings Software".
*The diagram shown here are for reference only. Please refer to page 33 for the orientation of AMD Fan
LED Header (AMD_FAN_LED1) and page 30 for the orientation of AMD LED Fan USB Header (USB_5).
24
X370 Killer SLI/ac / X370 Killer SLI
This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Dual Channel Memory Technology.
1. For dual channel configuration, you always need to install identical (the same
brand, speed, size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.
- SR - - 2400
- DR - - 2400
- SR - SR 2400
- DR - DR 2133
SR SR SR SR 1866
Ryzen CPUs:
UDIMM Memory Slot Frequency
A1 A2 B1 B2 (Mhz)
- SR - - 2667
- DR - - 2667
- SR - SR 2667
- DR - DR 2400-2667
SR SR SR SR 2133-2400
English
25
The DIMM only fits in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
3
English
26
X370 Killer SLI/ac / X370 Killer SLI
Before installing an expansion card, please make sure that the power supply is switched off
or the power cord is unplugged. Please read the documentation of the expansion card and
make necessary hardware settings for the card before you start the installation.
PCIe slots:
PCIE1 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE3 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE4 (PCIe 3.0 x16 slot) is used for PCI Express x8 lane width graphics cards.
PCIE5 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE6 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE2 PCIE4
For a better thermal environment, please connect a chassis fan to the motherboards chassis
fan connector (CHA_FAN1 or CHA_FAN2) when using multiple graphics cards.
27
2.5 Jumpers Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is Short. If no jumper cap is placed on the pins, the jumper
is Open. The illustration shows a 3-pin jumper whose pin1 and pin2 are Short
when a jumper cap is placed on these 2 pins.
CLRMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn off the computer and unplug the power
cord from the power supply. After waiting for 15 seconds, use a jumper cap to
short pin2 and pin3 on CLRMOS1 for 5 seconds. However, please do not clear the
CMOS right after you update the BIOS. If you need to clear the CMOS when you
just finish updating the BIOS, you must boot up the system first, and then shut it
down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default profile will be cleared only if the CMOS battery is
removed.
English
28
X370 Killer SLI/ac / X370 Killer SLI
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.
The front panel design may differ by chassis. A front panel module mainly consists of power
switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connect-
ing your chassis front panel module to this header, make sure the wire assignments and the
pin assignments are matched correctly.
English
29
Power LED and Speaker SPEAKER Please connect the
DUMMY
Header DUMMY
chassis power LED and
(7-pin SPK_PLED1) +5V the chassis speaker to this
(see p.1, No. 23) header.
1
PLED+
PLED+
PLED-
SATA3_6
(SATA3_1_2: connectors support SATA
see p.1, No. 14) data cables for internal
(SATA3_3_4: storage devices with up to
see p.1, No. 13) 6.0 Gb/s data transfer rate.
SATA3_3
SATA3_4
(SATA3_5_6:
see p.1, No. 12)
SATA3_1
SATA3_2
30
X370 Killer SLI/ac / X370 Killer SLI
1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup-
port HDA to function correctly. Please follow the instructions in our manual and chassis
manual to install your system.
2. If you use an AC97 audio panel, please install it to the front panel audio header by the
steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You dont need to connect
them for the AC97 audio panel.
E. To activate the front mic, go to the FrontMic Tab in the Realtek Control panel and
adjust Recording Volume.
(4-pin CHA_FAN2)
(see p.1, No. 20)
FAN_SPEED_CONTROL
English
CHA_FAN_SPEED
FAN_VOLTAGE
GND
31
4 3 2 1
32
X370 Killer SLI/ac / X370 Killer SLI
S_PWRDWN #
(17-pin TPMS1) Platform Module (TPM) system,
SERIRQ #
(see p.1, No. 24) which can securely store keys,
LAD2
LAD1
GN D
GN D
GND
digital certificates, passwords,
1
and data. A TPM system also
helps enhance network security,
+3VS B
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
33
2.7 M.2_SSD (NGFF) Module Installation Guide
The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and
versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2
Socket (M2_1) supports SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3
x4 (32 Gb/s) (with Ryzen CPU) or Gen3 x2 (16 Gb/s) (with A-Series APU). The M.2 Sockets
(M2_2) supports SATA3 6.0 Gb/s module and M.2 PCI
Express module up to Gen2 x2 (10 Gb/s).
Step 1
Step 2
4
3 Depending on the PCB type and
length of your M.2_SSD (NGFF)
module, find the corresponding nut
location to be used.
2
1
D C B A
No. 1 2 3 4
Nut Location A B C D
PCB Length 3cm 4.2cm 6cm 8cm
Module Type Type2230 Type 2242 Type2260 Type 2280
English
34
X370 Killer SLI/ac / X370 Killer SLI
Step 3
Step 4
Step 5
C B A
Step 6
D NUT2 NUT1
this might damage the module.
35
M.2_SSD (NGFF) Module Support List (M2_1)
Vendor Interface P/N
Intel PCIe INTEL 6000P-SSDPEKKF256G7 (nvme)
Kingston PCIe Kingston SHPM2280P2 / 240G (Gen2 x4)
Samsung PCIe Samsung XP941-MZHPU512HCGL(Gen2x4)
SanDisk PCIe SanDisk-SD6PP4M-128G( Gen2 x2)
ADATA SATA ADATA - AXNS381E-128GM-B
Kingston SATA Kingston-RBU-SNS8400S3 / 180GD
Crucial SATA Crucial-CT240M500SSD4-240GB
SanDisk SATA SanDisk-SD6SN1M-128G
Intel SATA INTEL 540S-SSDSCKKW240H6-240GB
ezlink SATA ezlink P51B-80-120GB
Kingston SATA Kingston SM2280S3G2/120G - Win8.1
SanDisk SATA SanDisk X400-SD8SN8U-128G
Transcend SATA Transcend TS256GMTS800-256GB
LITEON SATA LITEON LJH-256V2G-256GB (2260)
PLEXTOR SATA PLEXTOR PX-128M7VG-128GB
PLEXTOR SATA PLEXTOR PX-128M6G-2260-128GB
V-Color SATA V-Color 120G
V-Color SATA V-Color 240G
SanDisk SATA Sandisk Z400s-SD8SNAT-128G-1122
Transcend SATA Transcend TS64GMTS400-64GB
WD SATA WD BLUE WDS100T1B0B-00AS40
WD SATA WD GREEN WDS240G1G0B-00RC30
For the latest updates of M.2_SSD (NFGG) module support list, please visit our website
for details: http://www.asrock.com
English
36
X370 Killer SLI/ac / X370 Killer SLI
For the latest updates of M.2_SSD (NFGG) module support list, please visit our website
for details: http://www.asrock.com
English
37
1 Einleitung
Vielen Dank, dass Sie sich fr die X370 Killer SLI/ac / X370 Killer SLI von ASRock
entschieden haben ein zuverlssiges Motherboard, das konsequent unter der
strengen Qualittskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete
Leistung mit robustem Design, das ASRock Streben nach Qualitt und Bestndigkeit
erfllt.
Da die technischen Daten des Motherboards sowie die BIOS-Software aktualisiert werden
knnen, kann der Inhalt dieser Dokumentation ohne Ankndigung gendert werden. Falls
diese Dokumentation irgendwelchen nderungen unterliegt, wird die aktualisierte Version
ohne weitere Hinweise auf der ASRock-Webseite zur Verfgung gestellt. Sollten Sie technische
Hilfe in Bezug auf dieses Motherboard bentigen, erhalten Sie auf unserer Webseite spezifischen
Informationen ber das von Ihnen verwendete Modell. Auch finden Sie eine aktuelle Liste
untersttzter VGA-Karten und Prozessoren auf der ASRock-Webseite: ASRock-Website
http://www.asrock.com.
1.1 Lieferumfang
ASRock-Motherboard der X370 Killer SLI/ac / X370 Killer SLI (ATX-Formfaktor)
Schnellinstallationsanleitung zur X370 Killer SLI/ac / X370 Killer SLI
Support-CD zur X370 Killer SLI/ac / X370 Killer SLI
1 x E/A-Blendenabschirmung
2 x Serial-ATA- (SATA) Datenkabel (optional)
1 x ASRock SLI_HB_Bridge_2S-Karte (optional)
3 x Schrauben fr M.2-Sockel (optional) (nur beim X370 Killer SLI)
2 x Schrauben fr M.2-Sockel (optional) (nur beim X370 Killer SLI/ac)
2 x ASRock-2,4/5-GHz-WLAN-Antennen (optional) (nur beim X370 Killer SLI/ac)
Deutsch
38
X370 Killer SLI/ac / X370 Killer SLI
Plattform ATX-Formfaktor
Speicher Dualkanal-DDR4-Speichertechnologie
4 x DDR4-DIMM-Steckpltze
CPUs von AMDs Ryzen-Serie untersttzen ungepufferten
DDR4-3200+(OC)/2933(OC)/2667/2400/2133-ECC- und
-Non-ECC-Speicher*
APUs von AMDs A-Serie der 7. Generation untersttzen unge-
pufferten DDR4-2400/2133-ECC- und -Non-ECC-Speicher*
* Weitere Informationen finden Sie in der Speicherkompatibilitt-
sliste auf der ASRock-Webseite. (http://www.asrock.com/)
* Bitte beachten Sie Seite 25 fr die maximal untersttzte Frequenz
von DDR4-UDIMM.
Systemspeicher, max. Kapazitt: 64GB
15--Goldkontakt in DIMM-Steckpltze
39
Grafikkarte Integrierte Grafikkarte der AMD-RadeonTM-R-Serie in APU
der A-Serie*
* Tatschliche Untersttzung kann je nach Prozessor variieren
DirectX 12, Pixel Shader 5.0
Max. geteilter Speicher: 2GB
Untersttzt HDMI mit maximaler Auflsung von 4K x 2K (4096
x 2160) bei 24 Hz / (3840 x 2160) bei 30 Hz
Untersttzt Auto-Lippensynchronizitt, hohe Farbtiefe (12
bpc), xvYCC und HBR (Audio mit hoher Bitrate) mit HDMI-
Port (konformer HDMI-Monitor erforderlich)
Untersttzt HDCP mit HDMI-Port
Untersttzt Blu-ray- (BD) Wiedergabe (Full HD/1080p) mit
HDMI-Port
Rckblende, 2 x Antennenanschluss
E/A 1 x PS/2-Mausanschluss
1 x PS/2-Tastaturanschluss
1 x HDMI-Port
1 x Optischer SPDIF-Ausgang
40
X370 Killer SLI/ac / X370 Killer SLI
Anschluss 1 x COM-Anschluss-Stiftleiste
1 x TPM-Stiftleiste
1 x Betrieb-LED- und Lautsprecher-Stiftleiste
1 x AMD-Lfter-LED-Stiftleiste
2 x RGB-LED-Stiftleisten
* Untersttzt bis zu 12 V/3 A, 36-W-LED-Streifen
1 x CPU-Lfteranschluss (4-polig)
* Der CPU-Lfteranschluss untersttzt einen CPU-Lfter mit einer
maximalen Lfterleistung von 1 A (12 W).
1 x Anschluss fr Optionale-CPU-/Wasserpumpenlfter (4-pol-
Deutsch
41
1 x Anschluss fr Optionales-Gehuse-/Wasserpumpenlfter
(4-polig) (intelligente Lftergeschwindigkeitssteuerung)
* Der Optionales-Gehuse-/Wasserpumpenlfter untersttzt einen
Wasserkhlerlfter mit einer maximalen Lfterleistung von 1,5 A
(18 W).
* CHA_FAN2 knnen automatisch erkennen, ob ein 3- oder
4-poliger Lfter verwendet wird.
1 x 24-poliger ATX-Netzanschluss (hochdichter Netzanschluss)
1 x 8-poliger 12-V-Netzanschluss (hochdichter Netzanschluss)
1 x Audioanschluss an Frontblende
1 x AMD-Lfter-USB-Stiftleiste
2 x USB-2.0-Stiftleiste (untersttzen 4 USB-2.0-Ports)
(untersttzt Schutz gegen elektrostatische Entladung )
2 x USB-3.0-Stiftleiste (untersttzen 4 USB-3.0-Ports)
(untersttzt Schutz gegen elektrostatische Entladung)
Wasserpumpenlfter
Spannungsberwachung: +12 V, +5 V, +3,3 V, CPU Vcore,
VCORE_NB, DRAM, PCH 1,05V, +1,8V, VDDP
42
X370 Killer SLI/ac / X370 Killer SLI
Bitte beachten Sie, dass mit einer bertaktung, zu der die Anpassung von BIOS-Einstellungen,
die Anwendung der Untied Overclocking Technology oder die Nutzung von bertaktung-
swerkzeugen von Drittanbietern zhlen, bestimmte Risiken verbunden sind. Eine bertaktung
kann sich auf die Stabilitt Ihres Systems auswirken und sogar Komponenten und Gerte Ihres
Systems beschdigen. Sie sollte auf eigene Gefahr und eigene Kosten durchgefhrt werden. Wir
bernehmen keine Verantwortung fr mgliche Schden, die durch eine bertaktung verursa-
cht wurden.
Deutsch
43
1.3 Jumpereinstellung
Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe auf
den Kontakten angebracht ist, ist der Jumper kurzgeschlossen. Wenn keine Jumper-
Kappe auf den Kontakten angebracht ist, ist der Jumper offen. Die Abbildung zeigt
einen 3-poligen Jumper, dessen Kontakt 1 und Kontakt 2 kurzgeschlossen sind,
wenn eine Jumper-Kappe auf diesen 2 Kontakten angebracht ist.
CMOS-lschen-Jumper
(CLRMOS1)
(siehe S. 1, Nr. 18) Standard CMOS lschen
CLRMOS1 ermglicht Ihnen die Lschung der Daten im CMOS. Zum Lschen
und Rcksetzen der Systemparameter auf die Standardeinrichtung schalten Sie
den Computer bitte ab und ziehen das Netzkabel aus der Steckdose. Warten Sie 15
Sekunde, schlieen Sie dann Kontakt 2 und Kontakt 3 an CLRMOS1 5 Sekunden
lang mit einer Jumper-Kappe kurz. Lschen Sie den CMOS jedoch nicht direkt nach
der BIOS-Aktualisierung. Falls Sie den CMOS direkt nach Abschluss der BIOS-
Aktualisierung lschen mssen, starten Sie das System zunchst; fahren Sie es dann
vor der CMOS-Lschung herunter. Bitte beachten Sie, dass Kennwort, Datum, Zeit
und Benutzerstandardprofil nur gelscht werden, wenn die CMOS-Batterie entfernt
wird.
Deutsch
44
X370 Killer SLI/ac / X370 Killer SLI
Integrierte Stiftleisten und Anschlsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen
an diesen Stiftleisten und Anschlssen an. Durch Anbringen von Jumper-Kappen an diesen
Stiftleisten und Anschlssen knnen Sie das Motherboard dauerhaft beschdigen.
Systemblende-Stiftleiste PLED+
PLED-
Verbinden Sie
(9-polig, PANEL1) PWRBTN#
GND Netzschalter, Reset-Taste
(siehe S. 1, Nr. 15) und Systemstatusanzeige
am Gehuse entsprechend
1
GND
RESET#
GND der nachstehenden
HDLED-
HDLED+
Pinbelegung mit dieser
Stiftleiste. Beachten Sie vor
Anschlieen der Kabel die
positiven und negativen
Kontakte.
PWRBTN (Ein-/Austaste):
Mit der Ein-/Austaste an der Frontblende des Gehuses verbinden. Sie knnen die Abschaltung
Ihres Systems ber die Ein-/Austaste konfigurieren.
RESET (Reset-Taste):
Mit der Reset-Taste an der Frontblende des Gehuses verbinden. Starten Sie den Computer
ber die Reset-Taste neu, wenn er abstrzt oder sich nicht normal neu starten lsst.
PLED (Systembetriebs-LED):
Mit der Betriebsstatusanzeige an der Frontblende des Gehuses verbinden. Die LED leuchtet,
wenn das System luft. Die LED blinkt, wenn sich das System im S1/S3-Ruhezustand befindet.
Die LED ist aus, wenn sich das System im S4-Ruhezustand befindet oder ausgeschaltet ist (S5).
HDLED (Festplattenaktivitts-LED):
Mit der Festplattenaktivitts-LED an der Frontblende des Gehuses verbinden. Die LED
leuchtet, wenn die Festplatte Daten liest oder schreibt.
Das Design der Frontblende kann je nach Gehuse variieren. Ein Frontblendenmodul besteht
hauptschlich aus Ein-/Austaste, Reset-Taste, Betrieb-LED, Festplattenaktivitt-LED, Lautspre-
cher etc. Stellen Sie beim Anschlieen Ihres Frontblendenmoduls an diese Stiftleiste sicher, dass
Kabel- und Pinbelegung richtig abgestimmt sind.
Deutsch
45
Betrieb-LED- und SPEAKER Bitte verbinden Sie
DUMMY
Lautsprecher-Stiftleiste DUMMY
die Betrieb-LED des
(7-polig, SPK_PLED1) +5V Gehuses und den
(siehe S. 1, Nr. 23) Gehuselautsprecher mit
1
dieser Stiftleiste.
PLED+
PLED+
PLED-
SATA3_6
(SATA3_1_2: Anschlsse untersttzen
siehe S. 1, Nr. 14) SATA-Datenkabel fr
(SATA3_3_4: interne Speichergerte mit
siehe S. 1, Nr. 13) einer Datenbertragungsge
SATA3_3
SATA3_4
SATA3_2
46
X370 Killer SLI/ac / X370 Killer SLI
Audiostiftleiste GND
PRESENCE# Diese Stiftleiste dient
MIC_RET
(Frontblende) OUT_RET dem Anschlieen von
(9-polig, HD_AUDIO1) Audiogerten an der
(siehe S. 1, Nr. 26) Frontblende.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
1. High Definition Audio untersttzt Anschlusserkennung, der Draht am Gehuse muss dazu
jedoch HDA untersttzt. Bitte befolgen Sie zum Installieren Ihres Systems die Anweisungen in
unserer Anleitung und der Anleitung zum Gehuse.
2. Bei Nutzung eines AC97-Audiopanels dieses bitte anhand folgender Schritte an der Audiostift-
leiste der Frontblende installieren:
A. Mic_IN (Mikrofon) mit MIC2_L verbinden.
B. Audio_R (RIN) mit OUT2_R und Audio_L (LIN) mit OUT2_L verbinden.
C. Erde (GND) mit Erde (GND) verbinden.
D. MIC_RET und OUT_RET sind nur fr das HD-Audiopanel vorgesehen. Sie mssen sie nicht
fr das AC97-Audiopanel verbinden.
E. Rufen Sie zum Aktivieren des vorderen Mikrofons das FrontMic (Vorderes Mikrofon)-Register
in der Realtek-Systemsteuerung auf und passen Recording Volume (Aufnahmelautstrke) an.
4 3 2 1
(4-polig, CHA_FAN2)
(siehe S. 1, Nr. 20)
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
47
4 3 2 1
Optionales-Gehuse-/ Dieses Motherboard bietet zwei
Wasserpumpen- 4-polige Wasserkhlung-Ge-
Lfteranschluss FAN_SPEED_CONTROL
huselfteranschlsse. Falls
CHA_FAN_SPEED
(4-polig, CHA_FAN3/W_ FAN_VOLTAGE Sie einen 3-poligen Gehuse-
GND
PUMP) Wasserkhlerlfter anschlieen
(siehe S. 1, Nr. 19) mchten, verbinden Sie ihn bitte
mit Kontakt 1 bis 3.
Optionale-CPU-/ FAN_SPEED_CONTROL
Dieses Motherboard bie-
Wasserpumpen- CPU_FAN_SPEED
FAN_VOLTAGE
tet einen 4-poligen Was-
Lfteranschluss GND
serkhlung-CPU-Lfteran-
(4-polig, CPU_OPT/W_ schluss. Falls Sie einen 3-poligen
PUMP) CPU-Wasserkhlerlfter an-
1 2 3 4
48
X370 Killer SLI/ac / X370 Killer SLI
Serieller-Port-Stiftleiste RRXD1
DDTR#1 Diese COM1-Stiftleiste
DDSR#1
(9-polig, COM1) CCTS#1 untersttzt ein Modul fr
(siehe S. 1, Nr. 25) 1
serielle Ports.
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
SMB_DATA_MAIN
SMB_CLK_MAIN
(17-polig, TPMS1) das Trusted Platform Module-
S_PWRDWN #
SERIRQ #
(siehe S. 1, Nr. 24) LAD2 (TPM) System, das Schlssel,
LAD1
GN D
GN D
GND
digitale Zertifikate, Kennwrter
und Daten sicher aufbewahren
1
+3VS B
kann. Ein TPM-System hilft
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
49
1 Introduction
Nous vous remercions davoir achet cette carte mre ASRock de la X370 Killer SLI/
ac / X370 Killer SLI, une carte mre fiable fabrique conformment au contrle de
qualit rigoureux et constant appliqu par ASRock. Fidle son engagement de qualit
et de durabilit, ASRock vous garantit une carte mre de conception robuste aux
performances leves.
Les spcifications de la carte mre et du logiciel BIOS pouvant tre mises jour, le contenu de ce
document est soumis modification sans pravis. En cas de modifications du prsent document,
la version mise jour sera disponible sur le site Internet ASRock sans notification pralable.
Si vous avez besoin dune assistance technique pour votre carte mre, veuillez visiter notre site
Internet pour plus de dtails sur le modle que vous utilisez. La liste la plus rcente des cartes
VGA et des processeurs pris en charge est galement disponible sur le site Internet de ASRock.
Site Internet ASRock http://www.asrock.com.
50
X370 Killer SLI/ac / X370 Killer SLI
1.2 Spcifications
Processeur Prend en charge les APU srie A (Bristol Ridge) et les CPU
Ryzen (Summit Ridge) AM4 socket AMD
Alimentation 12 phases
Prend en charge le refroidissement par eau 95 W
52
X370 Killer SLI/ac / X370 Killer SLI
53
1 x connecteur pour ventilateur de chssis optionnel/pompe eau
(4 broches) (contrle de vitesse de ventilateur intelligent)
* Le ventilateur de chssis optionnel/pompe eau prend en charge un
ventilateur de refroidisseur deau dune puissance maximale de 1,5 A
(18 W).
* CHA_FAN2 peuvent dtecter automatiquement si un ventilateur 3
broches ou 4 broches est utilis.
1 x connecteur dalimentation ATX 24 broches (connecteur
dalimentation haute densit)
1 x connecteur dalimentation 12V 8 broches (connecteur
dalimentation haute densit)
1 x connecteur audio panneau frontal
1 x embase USB de ventilateur AMD
2 x embases USB 2.0 (4 ports USB 2.0 pris en charge) (Protection
contre les dcharges lectrostatiques)
2 x embases USB 3.0 (4 ports USB 3.0 pris en charge) (Protection
contre les dcharges lectrostatiques)
de pompe eau
Contrle simultan des vitesses du ventilateur : CPU, CPU
optionnel/pompe eau, Chssis, Chssis optionnel/ventilateurs
de pompe eau
Surveillance de la tension dalimentation : +12V, +5V, +3,3V,
CPU Vcore, VCORE_NB, DRAM, PCH 1,05V, +1,8V, VDDP
54
X370 Killer SLI/ac / X370 Killer SLI
* pour des informations dtailles de nos produits, veuillez visiter notre site: http://www.asrock.com
Il est important de signaler que lovercloking prsente certains risques, incluant des modifi-
cations du BIOS, lapplication dune technologie doverclocking dlie et lutilisation doutils
doverclocking dvelopps par des tiers. La stabilit de votre systme peut tre affecte par ces
pratiques, voire provoquer des dommages aux composants et aux priphriques du systme.
Loverclocking se fait vos risques et prils. Nous ne pourrons en aucun cas tre tenus pour
responsables des dommages ventuels provoqus par loverclocking.
Franais
55
1.3 Configuration des cavaliers (jumpers)
Lillustration ci-dessous vous renseigne sur la configuration des cavaliers (jumpers).
Lorsque le capuchon du cavalier est install sur les broches, le cavalier est court-
circuit. Si le capuchon du cavalier nest pas install sur les broches, le cavalier est
ouvert. Lillustration reprsente un cavalier 3 broches dont les broches 1 et 2 sont
court-circuites si un capuchon de cavalier est pos sur ces 2 broches.
CLRMOS1 vous permet deffacer les donns de la CMOS. Pour effacer les paramtres
du systme et rtablir les valeurs par dfaut, veuillez teindre votre ordinateur
et dbrancher son cordon dalimentation. Patientez 15 secondes, puis utilisez un
capuchon de cavalier pour court-circuiter la broche 2 et la broche 3 sur CLRMOS1
pendant 5 secondes. Toutefois, neffacez pas la CMOS immdiatement aprs avoir
mis jour le BIOS. Si vous avez besoin deffacer les donnes CMOS aprs une mise
jour du BIOS, vous devez tout dabord redmarrer le systme, puis lteindre avant de
procder leffacement de la CMOS. Veuillez noter que les paramtres mot de passe,
date, heure et profil de lutilisateur seront uniquement effacs en cas de retrait de la
pile de la CMOS.
Franais
56
X370 Killer SLI/ac / X370 Killer SLI
Les embases et connecteurs situs sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS
de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur
ces embases ou connecteurs endommagera irrmdiablement votre carte mre.
57
Prise LED dalimentation SPEAKER Veuillez brancher la LED
DUMMY
et haut-parleur DUMMY
d'alimentation du chssis et le
(SPK_PLED1 7 broches) +5V haut-parleur du chssis sur ce
(voir p.1, No. 23) connecteur.
1
PLED+
PLED+
PLED-
SATA3_6
(SATA3_1_2: sont compatibles avec les
voir p.1, No. 14) cbles de donnes SATA
(SATA3_3_4: pour les appareils de stockage
voir p.1, No. 13) internes avec un taux de
SATA3_3
SATA3_4
(SATA3_5_6: transfert maximal de 6,0 Gb/s.
voir p.1, No. 12)
SATA3_1
SATA3_2
GND
P+
(voir p.1, No. 22) P-
USB_PWR
58
X370 Killer SLI/ac / X370 Killer SLI
1. Laudio haute dfinition prend en charge la technologie Jack Sensing (dtection de la fiche),
mais le panneau grillag du chssis doit tre compatible avec la HDA pour fonctionner
correctement. Veuillez suivre les instructions figurant dans notre manuel et dans le manuel
du chssis pour installer votre systme.
2. Si vous utilisez un panneau audio AC97, veuillez le brancher sur lembase audio du panneau
frontal en procdant comme suit :
A. branchez Mic_IN (MIC) sur MIC2_L.
B. branchez Audio_R (RIN) sur OUT2_R et Audio_L (LIN) sur OUT2_L.
C. branchez la mise terre (GND) sur mise terre (GND).
D. MIC_RET et OUT_RET sont exclusivement rservs au panneau audio HD. Il est inutile
de les brancher avec le panneau audio AC97.
E. Pour activer le micro frontal, slectionnez longlet FrontMic du panneau de contrle
Realtek et rglez le paramtre Volume denregistrement.
(CHA_FAN2 4 broches)
FAN_SPEED_CONTROL
(voir p.1, No. 20) CHA_FAN_SPEED
FAN_VOLTAGE
GND
59
4 3 2 1
1 13 et la Broche 13.
60
X370 Killer SLI/ac / X370 Killer SLI
S_PWRDWN #
(voir p.1, No. 24) form Module Module de plate-
SERIRQ #
LAD2
LAD1
GN D
GN D
GND
forme scurise), qui permet
de sauvegarder cls, certificats
1 numriques, mots de passe et
donnes en toute scurit. Le
+3VS B
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
61
1 Introduzione
Congratulazioni per lacquisto della scheda madre ASRock X370 Killer SLI/ac / X370
Killer SLI, una scheda madre affidabile prodotta secondo i severissimi controlli di
qualit ASRock. La scheda madre offre eccellenti prestazioni con un design robusto
che si adatta all'impegno di ASRock di offrire sempre qualit e durata.
Dato che le specifiche della scheda madre e del software BIOS possono essere aggiornate, il
contenuto di questa documentazione sar soggetto a variazioni senza preavviso. Nel caso di
eventuali modifiche della presente documentazione, la versione aggiornata sar disponibile sul
sito Web di ASRock senza ulteriore preavviso. Per il supporto tecnico correlato a questa scheda
madre, visitare il nostro sito Web per informazioni specifiche relative al modello attualmente in
uso. possibile trovare l'elenco di schede VGA pi recenti e di supporto di CPU anche sul sito
Web di ASRock. Sito Web di ASRock http://www.asrock.com.
62
X370 Killer SLI/ac / X370 Killer SLI
1.2 Specifiche
63
Supporta HDMI con risoluzione massima fino a 4K x 2K
(4096x2160) a 24Hz / (3840x2160) a 30Hz
Supporto delle funzioni Auto Lip Sync, Deep Color (12bpc),
xvYCC e HBR (High Bit Rate Audio) con porta HDMI (
necessario un monitor compatibile HDMI)
Supporta HDCP con porta HDMI
Supporto di riproduzione Full HD 1080p Blu-ray (BD) con la
porta HDMI
64
X370 Killer SLI/ac / X370 Killer SLI
1,5A (18W).
2 x Connettori ventola telaio (4 pin) (Smart Fan Speed Control)
1 connettore ventola telaio optional/ventola pompa dellacqua
(4 pin) (Smart Fan Speed Control)
* La ventola telaio/ventola pompa dellacqua supporta ventole di sis-
temi di raffreddamento ad acqua di potenza massima di 1,5A (18W).
* CHA_FAN2 sono in grado di rilevare se in uso una ventola a 3
pin o 4 a pin.
1 x connettore alimentazione ATX 24-pin (connettore
alimentazione ad alta densit)
65
1 x Connettore alimentazione 12V 8-pin (connettore
alimentazione ad alta densit)
1 x connettore audio pannello frontale
1 x Collettore USB AMD FAN
2 x connettori USB 2.0 (supporto di 4 porte USB 2.0) (supporto
protezione da scariche elettrostatiche)
2 x connettori USB 3.0 (supporto di 4 porte USB 3.0) (supporto
protezione da scariche elettrostatiche)
* Per informazioni dettagliate sul prodotto, visitare il nostro sito Web: http://www.asrock.com
66
X370 Killer SLI/ac / X370 Killer SLI
Italiano
67
1.3 Impostazione jumper
L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio
del jumper posizionato sui pin, il jumper "cortocircuitato". Se sui pin non
posizionato alcun cappuccio del jumper, il jumper "aperto". L'illustrazione mostra
un jumper a 3 pin i cui pin1 e pin2 sono "cortocircuitati" quando un cappuccio del
jumper posizionato su questi 2 pin.
68
X370 Killer SLI/ac / X370 Killer SLI
Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper
su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori
provocher danni permanenti alla scheda madre.
Il design del pannello anteriore pu cambiare a seconda dello chassis. Un modulo di pannello
anteriore composto principalmente da interruttore di alimentazione, interruttore di reset,
LED di alimentazione, LED di attivit disco rigido, altoparlante, ecc. Quando si collega il
modulo del pannello anteriore dello chassis a questo header, accertarsi che le assegnazioni del
filo e le assegnazioni del pin corrispondano correttamente.
69
Connettore LED SPEAKER Collegare i LED alimentazi-
DUMMY
alimentazione e DUMMY
one e laltoparlante a questo
altoparlante +5V connettore.
(SPK_PLED1 7 pin)
1
(vedere pag. 1, n. 23)
PLED+
PLED+
PLED-
SATA3_6
(SATA3_1_2: SATA3 supportano cavi
vedere pag. 1, n. 14) dati SATA per dispositivi di
(SATA3_3_4: archiviazione interna, con
vedere pag. 1, n. 13) una velocit di trasferimento
SATA3_3
SATA3_4
(SATA3_5_6: dati fino a 6,0 Gb/s.
vedere pag.1, n. 12)
SATA3_1
SATA3_2
USB_PWR
Header USB 2.0 P- Ci sono due connettori
Italiano
P+
(USB_1_2 9 pin) GND
DUMMY su questa scheda madre.
(vedere pag. 1, n. 21) Ciascun header USB 2.0 pu
1
(USB_3_4 a 9 pin) GND supportare due porte.
P+
(vedere pag. 1, n. 22) P-
USB_PWR
70
X370 Killer SLI/ac / X370 Killer SLI
1. L'audio ad alta definizione supporta le funzioni Jack sensing, ma il filo del pannello sullo
chassis deve supportare HDA per funzionare correttamente. Seguire le istruzioni presenti nel
nostro manuale e nel manuale dello chassis per installare il sistema.
2. Se si utilizza un pannello audio AC97, installarlo sull'header audio del pannello anteriore
seguendo le fasi di seguito:
A. Collegare Mic_IN (MIC) a MIC2_L.
B. Collegare Audio_R (RIN) a OUT2_R e Audio_L (LIN) a OUT2_L.
C. Collegare Ground (GND) a Ground (GND).
D. MIC_RET e OUT_RET servono soltanto per il pannello audio HD. Non necessario
collegarli per il pannello audio AC97.
E. Per attivare il microfono anteriore, andare alla scheda FrontMic nel pannello di controllo
Realtek e regolare il Volume di registrazione.
Italiano
(CHA_FAN2 a 4 pin)
(vedere pag. 1, n. 20)
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
71
4 3 2 1
Connettore di 8 5
Questa scheda madre dotata
alimentazione ATX da 12 di un connettore di alimen-
V 4 1 tazione ATX da 12 V a 8 pin.
(ATX12V1 a 8 pin) Per utilizzare un'alimentazione
(vedere pag. 1, n. 1) ATX a 4 pin, collegarla lungo
il pin 1 e il pin 5.
72
X370 Killer SLI/ac / X370 Killer SLI
S_PWRDWN #
(TPMS1 a 17 pin) il sistema Trusted Platform
SERIRQ #
(vedere pag. 1, n. 24) Module (TPM), che pu archiv-
LAD2
LAD1
GN D
GN D
GND
iare in modo sicuro chiavi,
certificati digitali, password e
1
dati. Un sistema TPM permette
anche di potenziare la sicurezza
+3VS B
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
73
1 Introduccin
Gracias por comprar la placa base de la serie ASRock X370 Killer SLI/ac / X370
Killer SLI, una placa base fiable fabricada segn el rigurossimo control de calidad de
ASRock. Ofrece un rendimiento excelente con un diseo resistente de acuerdo con el
compromiso de calidad y resistencia de ASRock.
Ya que las especificaciones de la placa base y el software del BIOS podrn ser actualizados, el
contenido que aparece en esta documentacin estar sujeto a modificaciones sin previo aviso.
Si esta documentacin sufre alguna modificacin, la versin actualizada estar disponible
en el sitio web de ASRock sin previo aviso. Si necesita asistencia tcnica relacionada con esta
placa base, visite nuestro sitio web para obtener informacin especfica sobre el modelo que est
utilizando. Podr encontrar las ltimas tarjetas VGA, as como la lista de compatibilidad de la
CPU, en el sitio web de ASRock. Sitio web de ASRock http://www.asrock.com.
74
X370 Killer SLI/ac / X370 Killer SLI
1.2 Especificaciones
CPU Admite APU de la serie A AM4 con zcalo AMD (Bristol Ridge)
y CPU Ryzen (Summit Ridge)
Diseo de fase de alimentacin 12
Admite refrigeracin por agua de 95 W
Conjunto de
AMD Promontory X370
chips
75
Grficos Grficos de la serie R-de AMD RadeonTM integrados en APU
de las series A*
* El soporte real puede variar en funcin de la CPU
DirectX 12, Pixel Shader 5.0
Memoria mxima compartida de 2GB
Admite la tecnologa HDMI con una resolucin mxima de
4K x 2K (4096x2160) a 24Hz / (3840x2160) a 30Hz
Admite Sincronizacin automtica entre audio y vdeo, color
profundo (12 bpc), xvYCC y HBR (audio de alta tasa de bits) con
puerto HDMI (se necesita un monitor compatible con HDMI)
Admite HDCP con puerto HDMI
Compatible con reproduccin Blu-ray (BD) Full HD de 1080p
con puerto HDMI
Admite PXE
76
X370 Killer SLI/ac / X370 Killer SLI
77
2 x Conectores (4 contactos) para el ventilador del chasis (control
de velocidad de ventilador inteligente)
1 x Conector (4 contactos) para el ventilador de la bomba de agua/
opcional del chasis (control de velocidad de ventilador inteligente)
* El ventilador de la bomba de agua/opcional del chasis admite venti-
lador del disipador por agua con una potencia de ventilador mxima
de 1,5 A (18 W).
* CHA_FAN2 se pueden detectar automticamente si se usa el venti-
lador de 3 o 4 pines.
1 x Conector de alimentacin de 24 contactos y ATX (conector de
alimentacin de alta densidad)
1 Conector de alimentacin de 8 pines y 12V (conector de
alimentacin de alta densidad)
1 x Conector de audio en el panel frontal
1 x Base de conexiones USB de ventilador AMD
2 x Bases de conexiones USB 2.0 (admite 4 puertos USB 2.0).
(Admite proteccin contra ESD)
2 x Bases de conexiones USB 3.0 (admite 4 puertos USB 3.0).
(Admite proteccin contra ESD)
Funcin del BIOS legal UEFI AMI compatible con interfaz grfica de usuario
BIOS multilinge
Compatible con Plug and Play
Eventos de reactivacin conformes con ACPI 5.1
Compatible con Jumper FREE
Admite SMBIOS 2.3
Varios ajustes de voltaje de CPU, VCORE_NB, DRAM, VPPM,
Espaol
78
X370 Killer SLI/ac / X370 Killer SLI
* Para obtener informacin detallada del producto, visite nuestro sitio Web: http://www.asrock.com
Tenga en cuenta que hay un cierto riesgo implcito en las operaciones de aumento de la veloci-
dad del reloj, incluido el ajuste del BIOS, aplicando la tecnologa de aumento de velocidad lib-
erada o utilizando las herramientas de aumento de velocidad de otros fabricantes. El aumento
de la velocidad puede afectar a la estabilidad del sistema e, incluso, daar los componentes y
dispositivos del sistema. Esta operacin se debe realizar bajo su propia responsabilidad y usted
debe asumir los costos. No asumimos ninguna responsabilidad por los posibles daos causados
por el aumento de la velocidad del reloj.
Espaol
79
1.3 Instalacin de los puentes
La instalacin muestra cmo deben instalarse los puentes. Cuando la tapa de puente
se coloca en los pines, el puente queda Corto. Si no coloca la tapa de puente en los
pines, el puente queda Abierto. La ilustracin muestra un puente de 3 pines cuyo pin
1 y pin 2 son Cortos cuando se coloca una tapa de puente en estos 2 pines.
CLRMOS1 le permite borrar los datos del CMOS. Para borrar y restablecer los
parmetros del sistema a los valores predeterminados de instalacin, apague el
ordenador y desenchufe el cable de alimentacin de la toma de alimentacin.
Despus de esperar 15 segundos, utilice un tapa de puente para acortar el pin2
y el pin3 en el CLRMOS1 durante 5 segundos. Sin embargo, no borre el CMOS
justo despus de que haya actualizado el BIOS. Si necesita borrar el CMOS cuando
acabe de actualizar el BIOS, deber arrancar el sistema primero y, a continuacin,
deber apagarlo antes de que realice el borrado del CMOS. Tenga en cuenta que la
contrasea, la fecha, la hora y el perfil de usuario predeterminado sern eliminados
Espaol
80
X370 Killer SLI/ac / X370 Killer SLI
Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre
estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores daar
de forma permanente la placa base.
El diseo del panel frontal puede ser diferente dependiendo del chasis. Un mdulo de panel
frontal consta principalmente de: interruptor de alimentacin, interruptor de reseteo, indicador
LED de alimentacin, indicador LED de actividad en el disco duro, altavoz, etc. Cuando
conecte su mdulo del panel frontal del chasis a este cabezal, asegrese de que las asignaciones
de los cables y los pines coinciden correctamente.
81
LED de alimentacin y SPEAKER Conecte el LED de alimentacin
DUMMY
base de conexiones para la DUMMY
del chasis y el altavoz del chasis
altavoz +5V a esta base de conexiones.
(SPK_PLED1 de 7
1
contactos)
PLED+
(consulte la pg.1, N 23) PLED+
PLED-
SATA3_6
(SATA3_1_2: son compatibles con cables de
consulte la pg.1, N. 14) datos SATA para dispositivos
(SATA3_3_4: de almacenamiento interno con
consulte la pg. 1, N. 13) una velocidad de transferencia
SATA3_3
SATA3_4
(SATA3_5_6: de datos de hasta 6,0 Gb/s.
consulte la pg.1, N. 12)
SATA3_1
SATA3_2
USB_PWR
Cabezales USB 2.0 P-
P+
Hay dos bases de conexiones en
GND
((USB1_2 de 9 contactos) DUMMY esta placa base. Cada cabezal
(consulte la pg.1, N 21) USB 2.0 admite dos puertos.
1
(USB_3_4 de 9 pines) P+
GND
P-
(consulte la pg.1, N 22) USB_PWR
82
X370 Killer SLI/ac / X370 Killer SLI
Espaol
4 3 2 1
(CHA_FAN2 de 4 pines)
(consulte la pg.1, N. 20)
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
83
4 3 2 1
Conector del ventilador de Esta placa base proporciona dos
la bomba de agua/opcional conectores de ventilador del
FAN_SPEED_CONTROL
del chasis CHA_FAN_SPEED
chasis de refrigeracin por agua
(CHA_FAN3/W_PUMPde FAN_VOLTAGE de 4 contactos. Si tiene
GND
4 contactos) pensando conectar un
(consulte la pg.1, N. 19) ventilador de refrigeracin por
agua del chasis de 3 contactos,
conctelo al pin 1-3.
84
X370 Killer SLI/ac / X370 Killer SLI
S_PWRDWN #
(TPMS1 de 17 pines)
SERIRQ #
(consulte la pg.1, N 24) LAD2 Segura (TPM, en ingls), que
LAD1
GN D
GN D
GND
puede almacenar de forma segura
claves, certificados digitales,
1 contraseas y datos. Un sistema
TPM tambin ayuda a aumentar
+3VS B
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
85
1
ASRock X370
Killer SLI/ac / X370 Killer SLI,
ASRock.
ASRock .
BIOS
.
- ASRock
. ,
, -
. - ASRock
VGA- . - ASRock http://www.asrock.com.
1.1
ASRock X370 Killer SLI/ac / X370 Killer SLI (- ATX)
ASRock X370 Killer SLI/ac / X370 Killer SLI
- ASRock X370 Killer SLI/ac / X370 Killer SLI
1 -
2 Serial ATA (SATA) ( )
1 x ASRock SLI_HB_Bridge_2S ( )
3 x M.2 ( )( X370 Killer SLI)
86
X370 Killer SLI/ac / X370 Killer SLI
1.2.
- ATX
DDR4
4 x DDR4 DIMM
AMD Ryzen
DDR4 3200+(OC)/2933
(OC)/2667/2400/2133 ECC ECC*
APU AMD A 7-
DDR4
2400/2133 ECC ECC*
*
(Memory Support List ) - AS-
Rock. (http://www.asrock.com/)
* DDR4 UDIMM .
.25.
: 64
DIMM 15
AMD Ryzen
2 x PCI Express 3.0 x16 ( x16 (PCIE2);
x8 (PCIE2) / x8 (PCIE4))*
APU AMD A 7-
1 x PCI Express 3.0 x16 ( x8 (PCIE2))*
* SSD-
NVMe.
4 PCI Express 2.0 x1
AMD Quad CrossFireXTM CrossFireXTM **
NVIDIA Quad SLITM SLITM**
** Ryzen
(Summit Ridge).
1 M.2 ( E) WiFi/BT 2230
15 VGA PCIe (PCIE2)
87
AMD RadeonTM R-
APU A*
*
DirectX 12, 5.0
: 2
HDMI 4K
x 2K (4096x2160) 24 (3840x2160
30)
Auto Lip Sync, Deep Color (12 /),
xvYCC HBR (High Bit Rate Audio) HDMI
( HDMI-)
HDCP HDMI.
Full HD 1080p Blu-ray (BD)
HDMI
7.1- HD Audio
( Realtek ALC892)
Premium Blu-ray Audio
Nichicon Fine Gold
88
X370 Killer SLI/ac / X370 Killer SLI
1 x RJ-45 (/
)
HD Audio: / /
/ / /
( )
6 x SATA3 6,0/,
RAID (RAID 0, RAID 1 RAID 10), NCQ, AHCI
.
1 x Ultra M.2 (M2_1), M.2 SATA3
2230/2242/2260/2280
6,0/ M.2 PCI Express Gen3 x4
(32/) ( Ryzen) Gen3 x2 (16/) (
APU A).*
1 x M.2 (M2_2), M.2 SATA3
2230/2242/2260/2280 6,0/
M.2 PCI Express Gen2 x2 (10/)*
* SSD- NVMe.
* ASRock U.2
1 x -
1 x
1 x
1 x
AMD.
2 x RGB-.
* ( 12/3, 36).
1 x , 4-
*
1 (12).
1 x
(4-) (-
)
*
1,5 (18).
2 x (4-)
("" )
1
(4-) (-
)
*
1,5 (18).
* CHA_FAN2
: 3- 4-.
89
1 ATX (24-
)
1 12 (8-
)
1
1 USB- AMD.
2 x USB 2.0 (4 USB 2.0) (
)
2 x USB 3.0 (4 USB 3.0) (
)
: ;
;
;
: ;
; ;
(
):
;
; ;
: ;
; ;
: +12, +5, +3,3,
, VCORE_NB, DRAM, PCH 1,05B, +1,8V, VDDP
90
X370 Killer SLI/ac / X370 Killer SLI
* -: http://www.asrock.com
, , BIOS,
Untied Overclocking
, .
.
.
, .
91
1.3
.
.
, .
3- 1 2
.
CMOS
(CLRMOS1)
(. . 1, 18) CMOS
CLRMOS1 CMOS.
,
.
15 2 3 CLRMOS1
5 . CMOS BIOS.
CMOS BIOS
,
CMOS. , , ,
, CMOS.
92
X370 Killer SLI/ac / X370 Killer SLI
1.4 ,
.
.
.
PLED+
PLED-
PWRBTN#
GND
(9-, PANEL1) ,
(. . 1, 15) 1
GND
RESET#
GND
HDLED-
HDLED+
,
.
.
PWRBTN ( ):
, .
.
RESET ( ):
,
. , ,
.
PLED ( ):
, .
, .
S1/S3, .
S4 (S5), .
HDLED ( ):
,
. ,
.
.
, ,
, , . .
.
93
SPEAKER
DUMMY
DUMMY
+5V
(7-, SPK_ .
1
PLED1)
PLED+
(. . 1, 23) PLED+
PLED-
Serial ATA3
SATA3_5
SATA3_6
(SATA3_1_2: SATA3
. . 1, 14) SATA
(SATA3_3_4:
. . 1, 13)
SATA3_3
SATA3_4
(SATA3_5_6: 6,0
. .1, 12) /.
SATA3_1
SATA3_2
USB
1
GND USB
P- P+
USB_PWR AMD SR3.
AMD
(4-, USB_5)
(. . 1, 9)
USB_PWR
USB 2.0 P-
P+
(9-, USB_1_2) GND
DUMMY .
(. . 1, 21) USB 2.0
1
(9-, USB_3_4) GND
P+
(. . 1, 22) P-
USB_PWR
.
94
X370 Killer SLI/ac / X370 Killer SLI
GND
PRESENCE#
MIC_RET
OUT_RET
(9-, HD_
AUDIO1) 1
OUT2_L
.
(. . 1, 26) J_SENSE
OUT2_R
MIC2_R
MIC2_L
1. ,
,
HDA. .
.
2. AC97
, :
A. Mic_IN (MIC) MIC2_L.
B. Audio_R (RIN) OUT2_R, Audio_L (LIN) OUT2_L.
C. (GND) (GND).
D. MIC_RET OUT_RET
. AC97 .
E. , FrontMic
Realtek Recording Volume ( ).
GND
FAN_VOLTAGE
CHA_FAN_SPEED
(4-, CHA_ FAN_SPEED_CONTROL
FAN1)
(. . 1, 11) .
4 3 2 1
(4-, CHA_
FAN2)
(. . 1, 20) FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
95
4 3 2 1
FAN_SPEED_CONTROL
4-
CHA_FAN_SPEED
FAN_VOLTAGE . 3-
GND
(4- CHA_FAN3/
W_PUMP) 13.
(. . 1, 19)
FAN_SPEED_CONTROL
CPU_FAN_SPEED
(4-, FAN_VOLTAGE 4-
CPU_FAN1)
GND
.
(. . 1, 2)
1 2 3 4
3-
,
1-3.
FAN_SPEED_CONTROL
CPU_FAN_SPEED
FAN_VOLTAGE
4-
GND
.
3-
(4- CPU_OPT/ 1 2 3 4
W_PUMP)
(. . 1, 3) 13.
12 24
(24-, 24-
ATXPWR1) .
20-
(. . 1, 6)
ATX,
1 13.
1 13
12 8 5
(8-, ATX12B1) 8-
(. . 1, 1)
4 1
12 .
4-
ATX,
1 5.
96
X370 Killer SLI/ac / X370 Killer SLI
RRXD1 COM1
DDTR#1
DDSR#1
(9-, COM1)
CCTS#1
.
(. . 1, 25) 1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
SMB_DATA_MAIN
SMB_CLK_MAIN
(17-, TPMS1) Trusted
S_PWRDWN #
(. . 1, 24) Platform Module (TPM),
SERIRQ #
LAD2
LAD1
GN D
GN D
GND
,
,
1 .
+3VS B
,
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
RGB-
1
RGB-
12V G R B
.
RGB-
(4-, RGB_LED1)
,
(. . 1, 16)
(4-, RGB_LED2) .
(. . 1, 17) !
RGB-
,
.
1
12V G R B
AMD. AMD
(4-, AMD_FAN_
LED1) RGB-,
(. . 1, 10) AMD.
,
.
!
,
.
97
1 Introduo
Obrigado por comprar a placa-me X370 Killer SLI/ac / X370 Killer SLI da ASRock,
uma placa-me confivel produzida sob o controle de qualidade altamente consistente
da ASRock. Esta placa principal oferece um excelente desempenho com um design
robusto em conformidade com o compromisso da ASRock em fabricar produtos de
qualidade e resistentes.
1 x Painel de E/S
2 x Cabos de dados Serial ATA (SATA) (Opcional)
1 x Placa ASRock SLI_HB_Bridge_2S (Opcional)
3 x Parafusos para Soquete M.2(Opcional) (para X370 Killer SLI somente)
2 x Parafusos para Soquete M.2(Opcional) (para X370 Killer SLI/ac somente)
2 x Antenas ASRock WiFi 2,4/5 GHz (Opcional) (para X370 Killer SLI/ac somente)
98
X370 Killer SLI/ac / X370 Killer SLI
1.2 Especificaes
Portugus
Capacidade mxima da memria do sistema: 64GB
Contato em Ouro 15 nos slots DIMM
100
X370 Killer SLI/ac / X370 Killer SLI
Portugus
1 x Plataforma TPM
1 x LED de alimentao e Cabeote de Autofalante
1 x Cabeote AMD Fan LED
2 x Cabeotes de LED RGB
* Suporta Tira de LED at 12V/3A, 36W
1 x Conector da ventoinha da CPU (4 pinos)
* O Conector do Ventilador de CPU suporta o ventilador de CPU
de alimentao mxima 1A do ventilador (12W).
1 x Conector de Ventilador de CPU/Ventilador da Bomba de
gua (4 pinos) (Controle de Velocidade de Ventoinha Inteli-
gente)
* O Ventilador de CPU Opcional/Ventilador da Bomba de gua
suporta o ventilador de refrigerador a gua de 1,5A mximo (18W)
potncia do ventilador.
2 x Conectores de Ventoinha de Chassi (4 pinos) (Controle de
Velocidade de Ventoinha Inteligente)
1 x Conector de Ventilador de Chassi/Ventilador da Bomba de
gua (4 pinos) (Controle de Velocidade de Ventoinha Inteligente)
* O Ventilador de Chassi Opcional/Ventilador da Bomba de gua
suporta o ventilador de refrigerador a gua de 1,5A mximo (18W)
potncia do ventilador.
101
* CHA_FAN2 podem detectar automaticamente se ventoinha de 3
pinos ou 4 pinos est em uso.
1 x Conector de energia 24-pinos ATX (Conector de energia de
alta densidade)
1 x Conector de energia 8-pinos 12V (Conector de energia de
alta densidade)
1 x Conector de udio do painel frontal
1 x Cabeote AMD Fan USB
2 x Plataformas USB 2.0 (Suporta 4 portas USB 2.0) (Suporta
Proteo ESD)
2 x Plataformas USB 3.0 (Suporta 4 portas USB 3.0) (Suporta
Proteo ESD)
1 Dr. Debug com LED
102
X370 Killer SLI/ac / X370 Killer SLI
* Para obter informaes detalhadas sobre o produto, por favor, visite o nosso site: http://www.asrock.com
Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das
definies na BIOS, a aplicao de tecnologia Untied Overclocking ou a utilizao de ferra-
mentas de overclocking de terceiros. O overclocking poder afetar a estabilidade do sistema ou
mesmo causar danos nos componentes e dispositivos do seu sistema. Ele deve ser realizado por
sua conta e risco. No nos responsabilizamos por possveis danos causados pelo overclocking.
Portugus
103
1.3 Configurao dos jumpers
A imagem abaixo mostra como os jumpers so configurados. Quando a tampa do
jumper colocada nos pinos, o jumper "Curto". Se no for colocada uma tampa de
jumper nos pinos, o jumper "Aberto". A imagem mostra um jumper de 3 pinos cujos
pino 1 e pino 2 esto "Curtos" quando a tampa do jumper colocada nestes 2 pinos.
CLRMOS1 permite que voc limpe os dados do CMOS. Para apagar e reinicializar
os parmetros do sistema nos valores predefinidos, desligue o computador e
desplugue a tomada da alimentao. Depois de aguardar 15 segundos, use uma capa
Portugus
104
X370 Killer SLI/ac / X370 Killer SLI
Portugus
desligar o seu sistema atravs do boto de alimentao.
O design do painel frontal poder variar dependendo do chassi. Um mdulo de painel frontal
consiste principalmente em um boto de alimentao, um boto de reinicializao, um LED de
alimentao, um LED de atividade do disco rgido, um alto-falante, etc. Ao conectar seu mdu-
lo de painel frontal do chassi a este conector, certifique-se de que os fios e os pinos correspondem
de forma correta.
105
LED de alimentao e SPEAKER Conecte o LED de alimentao
DUMMY
Cabeote de Autofalante DUMMY
do chassi e o autofalante do
(SPK_PLED1 7 pinos) +5V chassi a este cabeote.
(ver p.1, N. 23)
1
PLED+
PLED+
PLED-
SATA3_6
(SATA3_1_2: suportam cabos de dados
ver p.1, N. 14) SATA para dispositivos de
(SATA3_3_4: armazenamento interno com
ver pg.1 No. 13) uma taxa de transferncia de
SATA3_3
SATA3_4
SATA3_2
Portugus
USB_PWR
Suportes USB 2.0 P-
P+
H dois cabeotes nesta
GND
((USB1_2 de 9 pinos) DUMMY placa-me. Cada suporte USB
(ver p.1, N. 21) 2.0 pode suportar duas portas.
1
(USB_3_4 de 9 pinos) P+
GND
P-
(ver p.1, N. 22) USB_PWR
106
X370 Killer SLI/ac / X370 Killer SLI
1. O udio de alta definio suporta Sensor de Adaptador, mas o fio do painel no chassi dever
suportar HDA para funcionar corretamente. Por favor, siga as instrues no nosso manual e
no manual do chassi para instalar o seu sistema.
2. Se utilizar um painel de udio AC97, instale-o no terminal de udio do painel frontal de
acordo com os passos abaixo:
A. Ligue Mic_IN (MIC) a MIC2_L.
Portugus
B. Conecte o Audio_R (RIN) a OUT2_R e Audio_L (LIN) a OUT2_L.
C. Conecte a ligao Terra (GND) Terra (GND).
D. MIC_RET e OUT_RET destinam-se apenas ao painel de udio HD. Voc no precisa lig-
los ao painel de udio AC97.
E. Para ativar o microfone frontal, v guia Microfone Frontal no painel de controle
Realtek e ajuste o Volume de gravao.
4 3 2 1
(CHA_FAN2 de 4 pinos)
(ver p.1, N. 20)
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
107
4 3 2 1
1 2 3 4
108
X370 Killer SLI/ac / X370 Killer SLI
S_PWRDWN #
(TPMS1 de 17 pinos) ma com Mdulo de Plataforma
SERIRQ #
(ver p.1, N. 24) Confivel (TPM), que pode
LAD2
LAD1
GN D
GN D
GND
armazenar com segurana
1
chaves, certificados digitais,
senhas e dados. Um sistema
+3VS B
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
Portugus
(ver p.1, N. 16) extenso de LED RGB que per-
(RGB_LED2 de 4 pinos) mite aos usurios escolher entre
(ver p.1, N. 17) vrios efeitos de iluminao LED.
Ateno: Nunca instale o
cabo RGB LED na orientao
errada; caso contrrio, o cabo
pode ser danificado.
109
1 Giri
ASRock'n zorlu kalite kontrol srelerinden gemi olan ASRock X370 Killer SLI/ac
/ X370 Killer SLI ana kartn satn aldnz iin teekkr ederiz. Salam tasarm ile
ASRock'n kalite ve dayankllk taahhdne uygun ekilde mkemmel performans
salar.
110
X370 Killer SLI/ac / X370 Killer SLI
1.2 zellikler
Trke
* Ltfen DDR4 UDIMM maksimum frekans destei iin bkz. sayfa 25.
En fazla sistem bellei kapasitesi: 64GB
DIMM Yuvalarnda 15 Altn Temas
Trke
2 x RGB LED Balants
* 12V/3A, 36W LED Dizisine kadar destekler
1 x lemci Fan Balaycs (4 pimli)
* lemci Fan Balayc, en fazla 1 A (12 W) fan gcnde ilemci fan
destekler.
1 x lemci stee Bal/Su Pompal Fan Balayc (4 pimli) (Akll
Fan Hz Kontrol)
* lemci stee Bal/Su Pompal Fan, en fazla 1,5 A (18 W) fan
gcnde su soutmal fan destekler.
2 x Kasa Fan Balaycs (4 pimli) (Akll Fan Hz Kontrol)
1 x Kasa stee Bal/Su Pompal Fan Balayc (4 pimli) (Akll
Fan Hz Kontrol)
* Kasa stee Bal/Su Pompal Fan, en fazla 1,5 A (18 W) fan
gcnde su soutmal fan destekler.
* CHA_FAN2 3 pimli fann m yoksa 4 pimli fann m kullanmda
olduunu otomatik olarak alglayabilir.
1 x 24 pim ATX G Balaycs (Yksek Younluklu G
Balayc)
1 x 8 pim 12 V G Balaycs (Yksek Younluklu G
Balaycs)
1 x n Panel Ses Balaycs
1 x AMD Fan USB Balants
113
2 x USB 2.0 Balants (4 USB 2.0 balant noktas destekler) (ESD
Korumas destekler)
2 x USB 3.0 Balants (4 USB 3.0 balant noktas destekler) (ESD
Korumas destekler))
BIOS zellii ok dilli GUI destei ile AMI UEFI Legal BIOS
"Tak ve Oynat" zelliini destekler
ACPI 5,1 uyumluluu uyandrma olaylar
Balant teli olmadan altrma zelliini destekler
SMBIOS 2.3 Destei
CPU, VCORE_NB, DRAM, VPPM, PCH 1,05V, +1,8V, VDDP,
PROM 2,5V, oklu Gerilim Ayar
114
X370 Killer SLI/ac / X370 Killer SLI
Trke
CLRMOS1, CMOS verilerini temizlemenizi salar. Sistem parametrelerini
temizlemek ve varsaylan kurulum ayarlarna sfrlamak iin, ltfen bilgisayar
kapatn ve g kablosunu g beslemesinden ekin. 15 saniye bekledikten
sonra, CLRMOS1 zerindeki pin2 ve pin3' 5 saniye boyunca ksaltmak iin bir
balant teli kullann. Ancak, CMOS'u ltfen BIOS'u gncelledikten hemen sonra
temizlemeyin. BIOS'u gncelledikten hemen sonra CMOS'u temizlemeniz gerekirse,
nce sistemi balatn ve ardndan CMOS temizleme ilemi ncesinde yeniden
kapatn. Ltfen, ifre, tarih, saat ve varsaylan kullanc profilinin yalnzca CMOS
bataryas karldnda temizleneceini unutmayn.
115
1.4 Yerleik Balantlar ve Balayclar
Yerleik balantlar ve balayclar balant teli deildir. Balant teli kapaklarn bu balant
ve balayclar zerine yerletirmeyin. Balant teli kapaklarnn balantlar ve balayclar
zerine yerletirilmesi ana karta kalc hasar verebilir.
PWRBTN (G Anahtar):
G anahtarn kasa n paneline balayn. G anahtarn kullanarak sistemin hangi yne
Trke
n panel tasarm kasaya gre deiiklik gsterebilir. Bir n panel modl, temel olarak bir g
anahtar, sfrlama anahtar, g LED'i, sabit src etkinlii LED'i, hoparlr gibi birimlerden
oluur. Kasanzn n panel modln bu balantya takmadan nce, kablo dzenlemeleri ve
pim dzenlemelerinin dzgn ekilde yapldndan emin olun.
116
X370 Killer SLI/ac / X370 Killer SLI
PLED+
PLED+
PLED-
SATA3_6
(SATA3_1_2: veri aktarm hz 6,0 Gb/
bkz. s.1, No. 14) sn'ye kadar olan dahili
(SATA3_3_4: depolama aygtlar iin
bkz. s.1, No. 13) tasarlanm SATA veri
SATA3_3
SATA3_4
SATA3_2
Trke
AMD LED Fan USB 1 Bu balant, AMD SR3
Balants P- P+
GND Soutucusunda bulunan
(4 pimli USB_5) USB_PWR USB konektrn
(bkz. s.1, No. 9) balamak iin kullanlr.
USB_PWR
USB 2.0 Balantlar P-
P+
Bu anakartta iki balk
GND
(9 pimli USB_1_2) DUMMY vardr. Her bir USB 2.0
(bkz. s.1, No. 21) balants, iki adet balant
1
(9 pimli USB_3_4) P+
GND noktasn destekleyebilir.
P-
(bkz. s.1, No. 22) USB_PWR
117
USB 3.0 Balant Vbus
Vbus
IntA_PB_SSRX-
Bu anakart zerinde,
(19-pin USB3_7_8) IntA_PA_SSRX-
IntA_PA_SSRX+
IntA_PB_SSRX+
GND
I/O paneli zerindeki drt
(bkz. s.1, No. 8) GND
IntA_PA_SSTX-
IntA_PB_SSTX-
IntA_PB_SSTX+
USB 3.0 balant noktasnn
(19 pimli USB3_9_10) IntA_PA_SSTX+
GND
GND
IntA_PB_D-
yan sra, iki adet balant
(bkz. s.1, No. 7) IntA_PA_D-
IntA_PA_D+
IntA_PB_D+
Dummy
bulunmaktadr. Her bir
USB 3.0 balants, iki
1
1. Yksek Tanml Ses, Jak Alglama zelliini destekler ancak bu ilevin dzgn alabilmesi
iin kasa zerindeki panel kablosunun HDA ilevini desteklemesi gerekmektedir. Sisteminizi
kurarken, ltfen klavuzumuzdaki ve kasa klavuzundaki talimatlar izleyin.
2. AC'97 ses paneli kullanyorsanz, ltfen aadaki admlar uygulayarak n panel ses
balantsna takn:
A. Mic_IN'i (MIC) MIC2_L'ye balayn.
B. Audio_R'yi (RIN) OUT2_R'ye ve Audio_L'yi (LIN) OUT2_L'ye balayn.
C. Toprak' (GND) Toprak'a (GND) balayn.
D. MIC_RET ve OUT_RET yalnzca HD ses paneli iindir. AC'97 ses paneli iin bunlar
balamanza gerek yoktur.
E. n mikrofonu etkinletirmek iin, Realtek Kontrol panelinde FrontMic sekmesine gidin
ve Kayt Ses Seviyesini ayarlayn.
(4 pimli CHA_FAN2)
(bkz. s.1, No. 20) FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
118
X370 Killer SLI/ac / X370 Killer SLI
4 3 2 1
Kasa stee Bal/Su Bu anakart, iki 4-Pinli
Pompas Fan Balaycs su soutmal kasa fan
FAN_SPEED_CONTROL
(4 pimli CHA_FAN3/W_ CHA_FAN_SPEED
balaycsna sahiptir. Bir
PUMP) FAN_VOLTAGE 3-Pin kasa su soutmal fan
GND
(bkz. s.1, No. 19) balamay planlyorsanz,
ltfen Pin 1-3'e balayn.
Trke
PUMP) 1 2 3 4
su soutmal ilemci fan
(bkz. s.1, No. 3) balamak isterseniz ltfen
Pim 1-3'e balayn.
119
Seri Balant Noktas RRXD1
DDTR#1 Bu COM1 balants seri
DDSR#1
Balants CCTS#1 balant yuvas modln
(9 pimli COM1) 1
destekler.
(bkz. s.1, No. 25)
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
SMB_DATA_MAIN
SMB_CLK_MAIN
dijital sertifikalar, ifreler ve
S_PWRDWN #
(17 pimli TPMS1)
SERIRQ #
(bkz. s.1, No. 24) verileri gvenli bir ekilde
LAD2
LAD1
GN D
GN D
GND
saklama zellii bulunan
Gvenilir Platform Modl
1 (TPM) sistemini destekler.
+3VS B
TPM sistemleri, ayn zamanda
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
a gvenliinin artrlmas,
dijital kimliklerin korunmas
ve platform btnlnn
salanmasna da yardmc olur.
Trke
120
X370 Killer SLI/ac / X370 Killer SLI
1
ASRock X370 Killer SLI/ac / X370 Killer SLI
. ASRock
. ASRock
.
BIOS ,
. , ASRock
.
,
. ASRock VGA CPU
. ASRock http://www.asrock.com.
1.1
ASRock X370 Killer SLI/ac / X370 Killer SLI (ATX )
ASRock X370 Killer SLI/ac / X370 Killer SLI
ASRock X370 Killer SLI/ac / X370 Killer SLI CD
I/O 1
ATA (SATA) 2 ( )
ASRock SLI_HB_Bridge_2S 1 ( )
M.2 3 ( ) (X370 Killer SLI )
M.2 2 ( ) (X370 Killer SLI/ac )
ASRock WiFi 2.4/5 GHz 2 ( ) (X370 Killer SLI/ac )
121
1.2
ATX
DDR4
DDR4 DIMM 4
AMD Ryzen CPU DDR4 3200+(OC)/2933(OC)
/2667/2400/2133 ECC ECC,
.*
AMD 7 A APU DDR4 2400/2133 ECC
ECC, .*
* ASRock
. (http://www.asrock.com/)
* DDR4 UDIMM 25
.
: 64GB
DIMM 15 Gold Contact
7.1 CH HD (Realtek
ALC892 )
Blu-ray
Nichicon Fine Gold
PCB
R/L PCB
2
I/O PS/2 1
PS/2 1
HDMI 1
SPDIF 1
USB 3.0 A 1 (10 Gb/s) (ESD )
USB 3.0 C 1 (10 Gb/s) (ESD )
USB 3.0 6 (ESD )
LED RJ-45 LAN 1 (ACT/LINK LED SPEED
LED)
123
HD : / / / /
/ ( )
COM 1
TPM 1
LED 1
AMD LED 1
RGB LED 2
* 12V/3A, 36W LED
CPU (4 ) 1
* CPU 1A(12W) CPU
.
CPU / (4 ) 1 (
)
* CPU / 1.5A(18W)
.
(4 ) 2 ( )
/ (4 ) 1 (
)
* / 1.5A(18W)
.
* 3 4 CHA_FAN2
.
24 ATX 1 ( )
8 12V 1 ( )
1
AMD USB 1
124
X370 Killer SLI/ac / X370 Killer SLI
: CPU, CPU / , , /
: CPU, CPU / , ,
/
(CPU ):
CPU, CPU / , , /
: CPU, CPU / , ,
/
: +12V, +5V, +3.3V, CPU Vcore, VCORE_NB,
DRAM, PCH 1.05V, +1.8V, VDDP
* : http://www.asrock.com
125
1.3
.
. . 3
1 2 .
Clear CMOS
(CLRMOS1)
(1 , 18 ) Clear CMOS
CLRMOS1 CMOS .
. 15
CLRMOS1 2 3 5 . BIOS
CMOS . BIOS CMOS
,
CMOS . CMOS ,
, , .
126
X370 Killer SLI/ac / X370 Killer SLI
1.4
.
. .
PLED+
PLED- ,
PWRBTN#
(9 PANEL1) GND ,
(1 , 15 )
1
GND
RESET#
GND
HDLED-
.
HDLED+
.
PWRBTN( ):
.
.
RESET( ):
.
.
PLED( LED):
. LED
. S1/S3 LED .
S4 (S5) LED .
HDLED( LED):
LED .
LED .
. ,
, LED, LED, .
.
127
LED SPEAKER LED
DUMMY
(7 SPK_PLED1) DUMMY
+5V
(1 , 23 ) .
PLED+
PLED+
PLED-
ATA3 6 SATA3
SATA3_5
SATA3_6
(SATA3_1_2: 6.0 Gb/s
1 , 14 )
(SATA3_3_4:
SATA3_3
SATA3_4
1 , 13 ) SATA
(SATA3_5_6: .
1 , 12 )
SATA3_1
SATA3_2
1
AMD LED USB AMD SR3
GND
(4 USB_5) P- P+ USB
USB_PWR
(1 , 9 )
.
USB_PWR
USB 2.0 P-
P+
GND
(9 USB1_2) DUMMY .
(1 , 21 ) USB 2.0
1
(9 USB_3_4) P+
GND
P-
(1 , 22 ) USB_PWR .
128
X370 Killer SLI/ac / X370 Killer SLI
GND
PRESENCE#
MIC_RET
(9 HD_AUDIO1) OUT_RET
(1 , 26 )
.
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
1.
HDA .
.
2. AC97
:
A. Mic_IN (MIC) MIC2_L .
B. Audio_R (RIN) OUT2_R Audio_L (LIN) OUT2_L .
C. (GND) (GND) .
D. MIC_RET OUT_RET HD . AC97
.
E. Realtek FrontMic Re-
cording Volume( ) .
GND
FAN_VOLTAGE
CHA_FAN_SPEED
(4 CHA_FAN1) FAN_SPEED_CONTROL
(1 , 11 )
.
4 3 2 1
(4 CHA_FAN2)
(1 , 20 ) FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
129
4 3 2 1
CPU/ / 4
FAN_SPEED_CONTROL
(4 CHA_FAN3/W_ CHA_FAN_SPEED
2
PUMP) FAN_VOLTAGE . 3 CPU
GND
(1 , 19 )
1-3
.
CPU FAN_SPEED_CONTROL
CPU_FAN_SPEED
4
(4 CPU_FAN1) FAN_VOLTAGE
GND
CPU ( )
(1 , 2 )
1 2 3 4 . 3 CPU
1-3
.
CPU / FAN_SPEED_CONTROL 4
CPU_FAN_SPEED
FAN_VOLTAGE CPU
GND
(4 CPU_OPT/W_PUMP) . 3
(1 , 3 ) 1 2 3 4
CPU
1-3 .
ATX 24
12 24
(24 ATXPWR1) ATX
(1 , 6 ) . 20
ATX
1
1 13 13
.
ATX 12V 8 5 8
(8 ATX12V1) ATX 12V
(1 , 1 ) 4 1
.
4 ATX
1
5
.
130
X370 Killer SLI/ac / X370 Killer SLI
RRXD1
DDTR#1 COM1
DDSR#1
(9 COM1) CCTS#1
(1 , 25 ) 1
.
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
TPM ,
SMB_DATA_MAIN
SMB_CLK_MAIN
S_PWRDWN #
(17 TPMS1) ,
SERIRQ #
(1 , 24 )
LAD2
LAD1
GN D
GN D
GND
TPM(Trusted
Platform Module)
1
+3VS B . TPM
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
,
.
RGB LED 1
2 RGB
(4 RGB_LED1) 12V G R B LED
(1 , 16 ) RGB LED
(4 RGB_LED2)
.
(1 , 17 )
: RGB LED
.
.
131
1
ASRock X370 Killer SLI/ac / X370 Killer SLI
X370 Killer SLI/ac / X370 Killer SLI
ASRock
ASRock
BIOS
ASRock
ASRock
VGA CPU ASRock
http://www.asrock.com
1.1
ASRock X370 Killer SLI/ac / X370 Killer SLI ATX
ASRock X370 Killer SLI/ac / X370 Killer SLI
ASRock X370 Killer SLI/ac / X370 Killer SLI CD
1 x I/O
2 x ATASATA
1 x ASRock SLI_HB_Bridge_2S
3 x M.2 X370 Killer SLI
2 x M.2 X370 Killer SLI/ac
2 x ASRock WiFi 2.4/5 GHz X370 Killer SLI/ac
132
X370 Killer SLI/ac / X370 Killer SLI
1.2
ATX
DDR4
4 x DDR4 DIMM
AMD Ryzen CPU DDR4 3200+(OC)/2933
(OC)/2667/2400/2133 ECC ECC
*
AMD 7 A APU DDR4 2400/2133 ECC
ECC *
* ASRock
(http://www.asrock.com/)
* DDR4 UDIMM 25
64GB
DIMM 15
133
AMD RadeonTM R- A
APU*
* CPU
DirectX 12Pixel Shader 5.0
2GB
HDMI 4K x 2K (4096x2160) @ 24Hz /
(3840x2160) @ 30Hz
HDMI 12bpc
xvYCC HBR
HDMI
HDMI HDCP
HDMI Full HD 1080p Blu-ray (BD)
7.1 CH HD
Realtek ALC892
PCB
R/L PCB
I/O 2 x
1 x PS/2
1 x PS/2
1 x HDMI
6 x USB 3.0
ESD
1 x SPDIF
134
X370 Killer SLI/ac / X370 Killer SLI
Gb/sA APU M.2 PCI Express
*
1 x M.2 (M2_2) 2230/2242/2260/2280 M.2
SATA3 6.0 Gb/s Gen2 x2 (10 Gb/s)
M.2 PCI Express *
* NVMe SSD
* ASRock U.2
1 x COM
1 x TPM
1 x LED
1 x AMD LED
2 x RGB LED
* 12V/3A36W LED
1 x CPU 4
* CPU 1A (12W) CPU
1 x CPU/ 4
* CPU/ 1.5A (18W)
2 x 4
1 x / 4
* / 1.5A
(18W)
135
* CHA_FAN2 3 4
1 x 24 ATX
1 x 8 12V
1 x
1 x AMD USB
2 x USB 2.0 4 USB 2.0
ESD
2 x USB 3.0 4 USB 3.0
ESD
1 x Dr. DebugLED
ACPI 5.1
SMBIOS 2.3
CPUVCORE_NBDRAMVPPMPCH 1.05V+1.8V
VDDPPROM 2.5V
: CPUCPU /
/
: CPU CPU /
/
CPU
: CPUCPU /
/
: CPUCPU /
/
: +12V+5V+3.3VCPU VcoreVCORE_NB
DRAMPCH 1.05V+1.8VVDDP
FCCCEWHQL
ErP/EuP ReadyErP/EuP
136
X370 Killer SLI/ac / X370 Killer SLI
* http://www.asrock.com
BIOS
137
1.3
3
1 2
CMOS
(CLRMOS1)
p.1No. 18 CMOS
CLRMOS1 CMOS
15
CLRCMOS1 2 3 5 BIOS
CMOS BIOS
CMOS
CMOS
CMOS
138
X370 Killer SLI/ac / X370 Killer SLI
1.4
PLED+
PLED-
9 1
PWRBTN#
GND
p.1No. 15
1
GND
RESET#
GND
HDLED-
HDLED+
PWRBTN
RESET
PLED LED
LED S1/S3 LED
S4 S5
LED
HDLEDLED
LED
LED
LED LED
139
LED SPEAKER LED
DUMMY
DUMMY
7 SPK_PLED1 +5V
p.1No. 23
1
PLED+
PLED+
PLED-
ATA3 SATA3_5
6 SATA3
SATA3_6
(SATA3_1_2: 6.0 Gb/
p.1No. 14
(SATA3_3_4: SATA
p.1No. 13
SATA3_3
SATA3_4
SATA3_5_6:
p.1No. 12
SATA3_1
SATA3_2
USB_PWR
USB 2.0 P- 2
P+
9 USB_1_2 GND
DUMMY
p.1No. 21 USB 2.0
1
9 USB_3_4 GND 2
P+
p.1No. 22 P-
USB_PWR
140
X370 Killer SLI/ac / X370 Killer SLI
GND
PRESENCE#
MIC_RET
OUT_RET
9 HD_AUDIO1
p.1No. 26
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
1.
HDA
2. AC 97
A. Mic_IN (MIC) MIC2_L
B. Audio_R (RIN) OUT2_R Audio_L (LIN) OUT2_L
C. (GND) (GND)
D. MIC_RET OUT_RET HD AC 97
E. Realtek FrontMic
GND
FAN_VOLTAGE
4 CHA_FAN1 CHA_FAN_SPEED
FAN_SPEED_CONTROL
p.1No. 11
4 3 2 1
4 CHA_FAN2
p.1No. 20
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
141
4 3 2 1
/ 4
FAN_SPEED_CONTROL
CHA_FAN_SPEED
(4 CHA_FAN3/W_ FAN_VOLTAGE
3
GND
PUMP)
p.1No. 19 1-3
CPU FAN_SPEED_CONTROL 4
CPU_FAN_SPEED
4 CPU_FAN1 FAN_VOLTAGE CPU
GND
p.1No. 2
1 2 3 4
3 CPU
1-3
CPU/ FAN_SPEED_CONTROL
4
CPU_FAN_SPEED
FAN_VOLTAGE
GND
CPU
3
(4 CPU_OPT/W_ 1 2 3 4
CPU
PUMP) 1-3
p.1No. 3
ATX 12 24 24
24 ATXPWR1 ATX
p.1No. 6 20
ATX
1 13
1 13
ATX 12V 8 5 8
8 ATX12V1 ATX12V
p.1No. 1 4 1
4
ATX
1 5
142
X370 Killer SLI/ac / X370 Killer SLI
RRXD1
DDTR#1
COM1
9 COM1 DDSR#1
CCTS#1
p.1No. 25
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
TPM
SMB_DATA_MAIN
SMB_CLK_MAIN
17 TPMS1
S_PWRDWN #
SERIRQ #
p.1No. 24 TPM
LAD2
LAD1
GN D
GN D
GND
1
TPM
+3VS B
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
RGB LED 1
2 RGB
4 RGB_LED1 12V G R B RGB LED
p.1No. 16
4 RGB_LED2 LED
p.1No. 17
: RGB LED
143
1
X370 Killer SLI/ac / X370 Killer SLI
BIOS
VGA CPU
http://www.asrock.com
1.1
X370 Killer SLI/ac / X370 Killer SLI ATX
X370 Killer SLI/ac / X370 Killer SLI
X370 Killer SLI/ac / X370 Killer SLI
1 x I/O
2 x ATASATA
1 x SLI_HB_Bridge_2S
2 x M.2 X370 Killer SLI
2 x M.2 X370 Killer SLI/ac
2 x WiFi 2.4/5 GHz X370 Killer SLI/ac
144
X370 Killer SLI/ac / X370 Killer SLI
1.2
ATX
DDR4
4 x DDR4 DIMM
AMD Ryzen DDR4 3200+(OC)/2933
(OC)/2667/2400/2133 ECC ECC *
AMD 7th Gen A APU DDR4 2400/2133 ECC
ECC *
* Memory Support List
(http://www.asrock.com/)
* 25 DDR4 UDIMM
64GB
DIMM 15
AMD Ryzen
2 x PCI Express 3.0 x16 -x16 (PCIE2) - x8 (PCIE2) /
x8 (PCIE4)*
AMD 7th Gen A APU
1 x PCI Express 3.0 x16 -x8 (PCIE2)*
* NVMe SSD
4 x PCI Express 2.0 x1
AMD Quad CrossFireXTM CrossFireXTM **
NVIDIA Quad SLITM SLITM**
** AMD Ryzen (Summit Ridge)
1 x M.2 SocketKey E 2230 WiFi/BT
VGA PCIe PCIE2 15
145
2GB
HDMI24Hz 4K x 2K
4096x2160/30Hz 3840x2160
HDMI HDMI Auto
Lip SyncDeep Color12bpc, xvYCC HBR
HDMI HDCP
HDMI 1080p Blu-rayBD
Blu-ray
Nichicon Fine Gold
PCB
/ PCB
I/O 2 x
1 x PS/2
1 x PS/2
1 x HDMI
1 x SPDIF
1 x USB 3.0 A 10 Gb/s ESD
1 x USB 3.0 C 10 Gb/s ESD
146
X370 Killer SLI/ac / X370 Killer SLI
Gen3 x432 Gb/s AMD Ryzen Gen3
x216 Gb/sA APU*
1 x M.2 M2_2 2230/2242/2260/2280 M.2
SATA3 6.0 Gb/s M.2 PCI Express
Gen2 x210 Gb/s*
* NVMe SSD
* U.2
1 x COM
1 x TPM
1 x LED
1 x AMD LED
2 x RGB LED
* 12V/3A, 36W LED
1 x CPU 4
* CPU 1A12W CPU
1 x CPU / 4
* CPU / 1.5A18W
2 x 4
1 x / 4
* / 1.5A18W
* CHA_FAN2 3 4
1 x 24 ATX
1 x 8 12V
1 x
1 x AMD USB
2 x USB 2.0 4 USB 2.0 ESD
2 x USB 3.0 4 USB 3.0 ESD
147
BIOS AMI UEFI Legal BIOS GUI
ACPI 5.1
jumperfree
SMBIOS 2.3
CPUVCORE_NBDRAMVPPMPCH 1.05V
+1.8VVDDPPROM 2.5V
: CPUCPU / /
: CPUCPU / /
CPU :
CPUCPU / /
: CPUCPU /
/
+12V+5V+3.3VCPU VcoreVCORE_
NBDRAMPCH 1.05V+1.8VVDDP
FCCCEWHQL
ErP/EuP ErP/EuP
* http://www.asrock.com
BIOS
148
X370 Killer SLI/ac / X370 Killer SLI
1.3
3
1 2
CMOS
CLRMOS1
1 18 CMOS
CLRMOS1 CMOS
15
CLRMOS1 2 3 5 BIOS
CMOS BIOS CMOS
CMOS
CMOS
149
1.4
PLED+
PLED-
9 PANEL1
PWRBTN#
GND
1 15
1
GND
RESET#
GND
HDLED-
HDLED+
PWRBTN:
RESET:
PLED LED:
LED
S1/S3 LED S4 S5 LED
HDLED LED:
LED LED
LED LED
150
X370 Killer SLI/ac / X370 Killer SLI
PLED+
PLED+
PLED-
ATA3 SATA3
SATA3_5
SATA3_6
SATA3_1_2: 6.0 Gb/s
1 14
SATA3_3_4: SATA
p.1 13
SATA3_3
SATA3_4
SATA3_5_6
1 12
SATA3_1
SATA3_2
1 9
USB_PWR
USB 2.0 P-
P+
2
GND
9 USB_1_2 DUMMY USB 2.0
1 21
1
9 USB_3_4 P+
GND
P-
1 22 USB_PWR
151
USB 3.0 Vbus
Vbus
IntA_PB_SSRX-
I/O USB
19 USB3_7_8 IntA_PA_SSRX-
IntA_PA_SSRX+
IntA_PB_SSRX+
GND
3.0
1 8 GND
IntA_PA_SSTX-
IntA_PB_SSTX-
IntA_PB_SSTX+
USB 3.0
19 USB3_9_10
IntA_PA_SSTX+ GND
GND IntA_PB_D-
1 7
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
GND
PRESENCE#
MIC_RET
9 HD_AUDIO1 OUT_RET
1 26
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
1. HDA
2. AC97
A. Mic_INMIC MIC2_L
B. Audio_RRIN OUT2_R Audio_LLIN OUT2_L
C. GNDGND
D. MIC_RET OUT_RET AC97
E. Realtek FrontMic
Recording Volume
GND
FAN_VOLTAGE
4 CHA_FAN1 CHA_FAN_SPEED
FAN_SPEED_CONTROL
1 11
4 3 2 1
4 CHA_FAN2
1 20
FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
152
X370 Killer SLI/ac / X370 Killer SLI
4 3 2 1
/ 4
FAN_SPEED_CONTROL
4 CHA_FAN3/W_ CHA_FAN_SPEED 3
FAN_VOLTAGE
PUMP GND
1 19 1-3
CPU FAN_SPEED_CONTROL
CPU_FAN_SPEED
4 CPU
4 CPU_FAN1 FAN_VOLTAGE
GND
1 2 3
1 2 3 4 CPU
1-3
CPU / FAN_SPEED_CONTROL
CPU_FAN_SPEED
4
FAN_VOLTAGE
GND
4 CPU_OPT/W_ 3 CPU
PUMP 1 2 3 4 1-3
1 3
ATX 12 24 24 ATX
24 ATXPWR1 20
1 6 ATX 1
13
1 13
153
RRXD1
DDTR#1 COM1
DDSR#1
9 COM1 CCTS#1
1 25 1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
SMB_DATA_MAIN
SMB_CLK_MAIN
S_PWRDWN #
17 TPMS1 Module
SERIRQ #
1 24 TPM
LAD2
LAD1
GN D
GN D
GND
1
TPM
+3VS B
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
154
X370 Killer SLI/ac / X370 Killer SLI
SJ/T 11364-2006
10
(Pb) (Cd) (Hg) (Cr(VI)) (PBB) (PBDE)
X O O O O O
X O O O O O
O: SJ/T 11363-2006
X: SJ/T 11363-2006
2002/95/EC
:
155
1
X370 Killer SLI/ac / X370 Killer SLI
BIOS
VGA CPU
http://www.asrock.com
1.1
X370 Killer SLI/ac / X370 Killer SLI ATX
X370 Killer SLI/ac / X370 Killer SLI
X370 Killer SLI/ac / X370 Killer SLI
1 x I/O
2 x Serial ATA SATA
1 x SLI_HB_Bridge_2S
3 x M.2 X370 Killer SLI
2 x M.2 X370 Killer SLI/ac
2 x ASRock WiFi 2.4/5 GHz X370 Killer SLI/ac
156
X370 Killer SLI/ac / X370 Killer SLI
1.2
ATX
AMD Promontory X370
DDR4
4 x DDR4 DIMM
AMD Ryzen CPU DDR4 3200+(OC)/2933
(OC)/2667/2400/2133 ECC ECC *
AMD 7 A APU DDR4 2400/2133 ECC
ECC *
* (http://
www.asrock.com/)
* DDR4 UDIMM 25
64GB
15
157
2GB
4K x 2K 4096x2160 @ 24Hz /
3840x2160 @ 30Hz HDMI
HDMI HDMI
Auto Lip SyncDeep Color 12bpcxvYCC HBR
HDMI HDCP
HDMI Full HD 1080p BD
I/O 2 x
1 x PS/2
1 x PS/2
1 x HDMI
1 x SPDIF
1 x USB 3.0 A 10 Gb/s
1 x USB 3.0 C 10 Gb/s
6 x USB 3.0
158
X370 Killer SLI/ac / X370 Killer SLI
SATA3 6.0 Gb/s M.2 PCI Express
Gen3 x4 32 Gb/s Ryzen CPU Gen3
x2 16 Gb/s A APU*
1 x M.2 M2_2 2230/2242/2260/2280 M.2
SATA3 6.0 Gb/s M.2 PCI Express
Gen2 x2 10 Gb/s *
* NVMe SSD
* U.2
1 x COM
1 x TPM
1 x LED
1 x AMD Fan LED
2 x RGB LED
* 12V/3A36W LED
1 x CPU 4-pin
* CPU 1A12W CPU
1 x CPU 4-pin
* CPU 1.5A 18W
2 x 4-pin
1 x 4-pin
* 1.5A 18W
* 3-pin 4-pin CHA_FAN2
1 x 24 pin ATX
1 x 8 pin 12V
1 x
1 x AMD USB
159
2 x USB 2.0 4 USB 2.0
2 x USB 3.0 4 USB 3.0
SMBIOS 2.3
CPUVCORE_NBDRAMVPPMPCH 1.05V
+1.8VVDDPPROM 2.5V
CPUCPU /
/
CPUCPU /
/
CPU
CPUCPU / /
CPUCPU /
/
+12V+5V+3.3VCPU VcoreVCORE_
NBDRAMPCH 1.05V+1.8VVDDP
FCCCEWHQL
ErP/EuP ready ErP/EuP ready
* http://www.asrock.com
BIOS
160
X370 Killer SLI/ac / X370 Killer SLI
1.3
3-pin
pin1 pin2
CMOS
CLRMOS1
1 18 CMOS
CLRMOS1 CMOS
15
CLRMOS1 pin2 pin3 5
BIOS CMOS BIOS CMOS
CMOS
CMOS
161
1.4
PLED+
PLED-
9-pin PANEL1
PWRBTN#
GND
1 15
1
GND
RESET#
GND
HDLED-
HDLED+
PWRBTN
RESET
PLED LED
LED
S1/S3 LED S4 S5
LED
HDLED LED
LEDLED
LED LED
162
X370 Killer SLI/ac / X370 Killer SLI
PLED+
PLED+
PLED-
Serial ATA3 SATA3_5 SATA3
SATA3_6
SATA3_1_2: SATA
1 14 6.0 Gb/s
SATA3_3_4:
1 13
SATA3_3
SATA3_4
SATA3_5_6:
1 12
SATA3_1
SATA3_2
163
USB 3.0 Vbus
Vbus
IntA_PB_SSRX-
I/O
19-pin USB3_7_8 IntA_PA_SSRX-
IntA_PA_SSRX+
IntA_PB_SSRX+
GND
USB 3.0
1 8 GND
IntA_PA_SSTX-
IntA_PB_SSTX-
IntA_PB_SSTX+
19-pin USB3_9_10 IntA_PA_SSTX+
GND
GND
IntA_PB_D-
USB 3.0
1 7 IntA_PA_D-
IntA_PA_D+
IntA_PB_D+
Dummy
1
GND
PRESENCE#
MIC_RET
9-pin HD_AUDIO1 OUT_RET
1 26
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
1. Jack Sensing
HDA
2. AC97
A. Mic_IN MIC MIC2_L
B. Audio_R RIN OUT2_R Audio_L LIN OUT2_L
C. GND GND
D. MIC_RET OUT_RET HD AC97
E. Realtek FrontMic
GND
FAN_VOLTAGE
4-pin CHA_FAN1 CHA_FAN_SPEED
FAN_SPEED_CONTROL
1 11
4 3 2 1
4-pin CHA_FAN2
1 20 FAN_SPEED_CONTROL
CHA_FAN_SPEED
FAN_VOLTAGE
GND
164
X370 Killer SLI/ac / X370 Killer SLI
4 3 2 1
/ 4-Pin
FAN_SPEED_CONTROL
4-pin CHA_FAN3/W_ CHA_FAN_SPEED 3-Pin
PUMP FAN_VOLTAGE
GND
Pin 1-3
1 19
CPU 4-Pin CPU
FAN_SPEED_CONTROL
CPU_FAN_SPEED
FAN_SPEED_CONTROL
CPU / CPU_FAN_SPEED 4-Pin
FAN_VOLTAGE
GND CPU
4-pin CPU_OPT/W_ 3-Pin CPU
PUMP 1 2 3 4 Pin 1-3
1 3
ATX 12 24 24-
24-pin ATXPWR1 pin ATX
1 6 20-pin ATX
Pin 1
Pin 13
1 13
RRXD1
DDTR#1 COM1
DDSR#1
9-pin COM1 CCTS#1
1 25 1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
165
TPM
SMB_DATA_MAIN
SMB_CLK_MAIN
S_PWRDWN #
17-pin TPMS1 TPM
SERIRQ #
1 24
LAD2
LAD1
GN D
GN D
GND
1
TPM
+3VS B
FRAM E
P CIRST #
+3 V
P CICL K
LAD3
LAD0
GN D
166
X370 Killer SLI/ac / X370 Killer SLI
Spesifikasi
CPU Mendukung Soket AMD AM4 APU Seri A (Bristol Ridge) dan
Bahasa Indonesia
CPU Ryzen (Summit Ridge)
Desain 12 Fase Daya
Mendukung Pendingin Air 95W
167
Grafis Grafis AMD RadeonTM Seri R7/R5 terpadu dalam APU seri
A*
* Dukungan sebenarnya dapat beragam menurut CPU
DirectX 12, Pixel Shader 5.0
Maksimum memori bersama 2GB
Bahasa Indonesia
Bahasa Indonesia
1 x Port LAN RJ-45 dengan LED (LED ACT/LINK dan LED
SPEED)
Soket Audio HD: Speaker Belakang / Tengah / Bass / Jalur
masuk / Speaker Depan / Mikrofon (Jack Audio berwarna
Emas)
169
* Sasis Opsional/Kipas Pompa Air mendukung kipas
berpendingin air dengan daya kipas maksimum 1,5A (18W).
* CHA_FAN2 dapat mendeteksi otomatis jika kipas 3-pin atau
4-pin sedang digunakan.
1 x Konektor Daya ATX 24 pin (Konektor Daya dengan
Bahasa Indonesia
Kerapatan Tinggi)
1 x Konektor Daya 12 V 8 pin (Konektor Daya dengan
Kerapatan Tinggi)
1 x Konektor Audio Panel Depan
1 x Kipas USB Header AMD
2 x Header USB 2.0 (Mendukung 4 port USB 2.0) (Mendukung
Perlindungan ESD)
2 x Header USB 3.0 (Mendukung 4 port USB 3.0) (Mendukung
Perlindungan ESD)
Fitur BIOS AMI UEFI Legal BIOS dengan dukungan GUI multibahasa
Mendukung Plug and Play
ACPI 5.1 kompatibel dengan aktivitas pengaktifan
Mendukung jumperfree
Dukungan SMBIOS 2.3
CPU, VCORE_NB, DRAM, VPPM, PCH 1,05V, +1,8V, VDDP,
PROM 2,5V, Penyesuaian Multi Voltase
170
X370 Killer SLI/ac / X370 Killer SLI
Bahasa Indonesia
* Untuk informasi rinci tentang produk, kunjungi situs web kami: http://www.asrock.com
171
Contact Information
If you need to contact ASRock or want to know more about ASRock, youre welcome
to visit ASRocks website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at http://www.asrock.com/support/tsd.asp
ASRock Incorporation
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,
6546 AR Nijmegen
The Netherlands
Phone: +31-24-345-44-33
Fax: +31-24-345-44-38
U.S.A.
Phone: +1-909-590-8308
Fax: +1-909-590-1026
EC-Declaration of Conformity
For the following equipment:
Motherboard
(Product Name)
X370 Killer SLI/ac / X370 Killer SLI / ASRock
(Model Designation / Trade Name)
ASRock Incorporation
(Manufacturer Name)
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.)
(Manufacturer Address)
is herewith confirmed to comply with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility Directive (2004/108/EC) and Safety Directive (2006/95/
EC), the following standards are applied:
EN 55022: 2006+A1:2007
EN 61000-3-2: 2009
EN 61000-3-3: 2008
EN 55024: 1998 + A1:2001 + A2:2003
IEC 61000-4-2: 2008;
IEC 61000-4-3: 2010; IEC 61000-4-4: 2010;
IEC 61000-4-5: 2005; IEC 61000-4-6: 2008;
IEC 61000-4-8: 2009; IEC 61000-4-11: 2004;
EN 60950-1: 2005 + A1:2009
IEC 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011
The following manufacturer / importer or authorized representative established within
the EUT is responsible for this declaration:
ASRock EUROPE B.V.
(Company Name)
Bijsterhuizen 1111 6546 AR Nijmegen The Netherlands
(Company Address)
Person responsible for making this declaration:
(Name, Surname)
A.V.P
(Position / Title)
May 12, 2017
(Date)