Sunteți pe pagina 1din 22

Tax procedure configuration for GST

Disclaimer: This document is a draft, and provided as a courtesy. This document is not to be
considered final, and all information contained herein is subject to change. As such, this
document is not to be quoted, cited in any reference, or used by anyone for any purpose other
than as a draft document.

1. Create Condition table


Condition table combinations are for your reference. You can refer the same and can
create your own condition table as per your business requirement.

1.1 Create condition table for material

Transaction code: M/05


Combination#1: Country/Region/PlntRegion/GST Class./Tax ind./Ctrl code

1|Page
Technical View:

2|Page
Combination#2: Region/PlntRegion/GST Class./Material

3|Page
1.2 Create condition table for Services
Transaction code: M/05
Combination#1: Region/PlntRegion/GST Class./Activity

2. Create Access sequence


Transaction code: OBQ2

4|Page
Field Assignment

5|Page
3. Create condition type
Transaction code: OBQ1
3.1 Create Central GST condition type

6|Page
3.2 Create State GST condition type

7|Page
3.3 Create Integrated GST condition type

8|Page
3.4 Create State GST Non-deductible condition type

9|Page
3.5 Create Central GST Non-deductible condition type

10 | P a g e
3.6 Create Integrated GST Non-deductible condition type

11 | P a g e
4. Create Accounting key
Transaction code: OBCN
4.1 Central GST

4.2 Integrated GST

12 | P a g e
4.3 State GST

5. Update tax procedure - TAXINN as shown below


Transaction code: OBQ3
Note: This is an illustration of GST conditions only, steps may vary from actual,
GST conditions should get calculate on BASE condition, for Non-deductible conditions
use standard non-deductible accounting key NVV or your own accounting key

13 | P a g e
6. Maintain tax percentage rates
You may maintain the tax percentage rates using transaction code FV11, either based on
the proposed access sequence or your own access sequence.

Pricing procedure configuration for GST

1. Create Condition table


Transaction code: V/05
1.1 Create condition table for material
Combination#1: Country/PlntRegion/TaxCl1Cust/TaxCl.Mat/Region/Ctrl code

14 | P a g e
Combination#2: PlntRegion/Region/TaxCl1Cust/Material

1.2 Create condition table for services using transaction code V/05
Combination#1: PlntRegion/Region/TaxCl1Cust/Activity

15 | P a g e
2. Create Access sequence
Transaction code: V/07

Fields Assignment:

16 | P a g e
3. Create Condition types
Transaction code: V/06
3.1 Create output Central GST condition type

17 | P a g e
3.2 Create output State GST condition type

18 | P a g e
3.3 Create output Integrated GST condition type

19 | P a g e
4. Create Accounting key
Transaction code: OV34
4.1 Create sales accounting key for Central GST, Integrated GST and State GST

20 | P a g e
5. Update Pricing procedure JINFAC
Transaction code: V/08
Note: This is an illustration of GST conditions only, steps may vary from actual,
GST conditions should get calculate on BASE condition

21 | P a g e
Disclaimer: 2016 SAP SE or an SAP affiliate company. All rights reserved.i

No part of this publication may be reproduced or transmitted in any form or for any purpose without
the express permission of SAP SE or an SAP affiliate company.

SAP and other SAP products and services mentioned herein as well as their respective logos are
trademarks or registered trademarks of SAP SE (or an SAP affiliate company) in Germany and other
countries. Please see http://global12.sap.com/corporate-en/legal/copyright/index.epx for additional
trademark information and notices.

Some software products marketed by SAP SE and its distributors contain proprietary software
components of other software vendors.

National product specifications may vary.

These materials are provided by SAP SE or an SAP affiliate company for informational purposes only,
without representation or warranty of any kind, and SAP SE or its affiliated companies shall not be liable
for errors or omissions with respect to the materials. The only warranties for SAP SE or SAP affiliate
company products and
services are those that are set forth in the express warranty statements accompanying such products
and services, if any. Nothing herein should be construed as constituting an additional warranty.

In particular, SAP SE or its affiliated companies have no obligation to pursue any course of business
outlined in this document or any related presentation, or to develop
or release any functionality mentioned therein. This document, or any related presentation, and SAP
SEs or its affiliated companies strategy and possible future developments, products, and/or platform
directions and functionality are all subject to change and may be changed by SAP SE or its affiliated
companies at any time
for any reason without notice. The information in this document is not a commitment, promise, or legal
obligation to deliver any material, code, or functionality. All forward-looking statements are subject to
various risks and uncertainties that could cause actual results to differ materially from expectations.
Readers are cautioned not to place undue reliance on these forward-looking statements, which speak
only as of their dates, and they should not be relied upon in making purchasing decisions.

22 | P a g e

S-ar putea să vă placă și