Documente Academic
Documente Profesional
Documente Cultură
Version 6.2
Administration Guide
Last Revision November 2003
All rights reserved. This document may not be reproduced in whole or in part without
prior consent from IDS Scheer AG. Subject to changes.
The use of registered names and trademarks in this publication does not imply that
such names are free for general use.
Copyright (C) 1997 -2003 by IDS Scheer AG, Saarbrcken
Contents
Contents
2 How to Set Up an ARIS Web Designer Client for Use in a Browser .......... 2
2.1 Procedure........................................................................................... 2
2.2 Installed ARIS Web Designer Files.......................................................... 3
2.3 Automatic Installation with aris_database.html and JRE ............................ 5
2.4 SSL - Encryption of Data Transmission Using Secure Socket Layer ............. 6
2.4.1 Settings for ARIS Business Server When Using SSL ........................... 6
2.4.2 Particularities Concerning SSL Encryption and JRE 1.4.x..................... 7
2.5 Language Update and Character Sets ..................................................... 9
2.6 Execution as Applet or Application ......................................................... 9
2.7 Provide Additional Memory...................................................................10
2.8 Installation by Software Distribution......................................................11
2.8.1 Possible Settings for user.cfg ........................................................11
2.8.2 Pre-Configured user.cfg................................................................11
2.8.3 How to Configure user.cfg ............................................................12
2.9 ARIS Web Report Server .....................................................................13
2.9.1 Hardware Requirements for ARIS Web Report Server .......................13
2.9.2 Report Formats and Report Files....................................................13
2.9.3 Creating Web Reports - Special Features ........................................14
2.9.3.1 Dialog Variables ...................................................................14
2.9.3.2 Windows API Functions .........................................................15
2.9.3.3 Nested Dialogs.....................................................................15
ARIS Administration I
Contents
5 Configuration Options............................................................................23
5.1 How to Configure arisserver.cfg............................................................ 23
5.1.1 HTML Generator - Current Database Lists ....................................... 24
5.1.2 Restriction of the Number of index_backup Files .............................. 25
5.2 When Must You Configure arislauncher.cfg? ........................................... 26
5.3 Central User Login Using LDAP ............................................................. 27
5.3.1 Requirements for LDAP Authentication ........................................... 27
5.3.2 Advantages of LDAP Authentication ............................................... 27
5.3.3 Security..................................................................................... 28
5.3.3.1 Access to Databases ............................................................. 28
5.3.3.2 SSL Protocol........................................................................ 28
5.3.3.3 Backup Server ..................................................................... 28
5.3.4 How to Set Up ARIS for LDAP Server Operation ............................... 29
5.3.5 Authentication Process ................................................................. 31
II Administration ARIS
Contents
7 Additional Information.......................................................................... 55
7.1 Maintenance Work with an ARIS Client ..................................................55
7.2 Automated Installation ........................................................................55
7.3 ARIS API: Continued Use of Programs from Earlier ARIS Versions..............56
7.4 ARIS Site Administrator.......................................................................57
7.5 ARIS Converter ..................................................................................57
7.6 Backing Up User and Configuration Databases ........................................58
7.7 Backing Up Current Configuration Files ..................................................59
7.8 Reset Database Administrator Password ................................................59
7.9 Server Log Directory ...........................................................................59
7.10 ARIS Metaframe .................................................................................59
IV Administration ARIS
Contents
11 Glossary ................................................................................................ 98
12 Appendix............................................................................................. 101
12.1 IDS Scheer Customer Inter@ction Center ............................................ 101
12.2 System Languages and Locale IDs ...................................................... 102
12.3 Port Numbers .................................................................................. 106
12.4 Copyright ........................................................................................ 106
ARIS Administration V
Manual Conventions
1 Manual Conventions
Icon Meaning
ARIS Administration 1
How to Set Up an ARIS Web Designer Client for Use in a Browser
2.1 Procedure
1. Ensure that the system requirements are satisfied (see chapter 10.6).
3. Install a JRE released for ARIS, e.g. JRE 1.4.2 (see chapter 2.3).
Install JRE in a path whose directory name must not include any
spaces or special characters. Otherwise, JRE cannot be
executed.
4. With your browser, navigate to the installation directory for the ARIS
Web Designer components. There, you will find the example file
index_lan.html. If the ARIS Web Designer components have been set
up, you will find a link to the HTML test page at the end of the Multiple
Language page. Any user can click on this link to verify that the
computer configuration for ARIS Web Designer is correct.
6. When users click on one of the database links for the first time, they
will be prompted to enter the license key, if you in your capacity as
administrator have not reconfigured the entry by changing the
user.cfg file (see chapter 2.8.3).
2 Administration ARIS
How to Set Up an ARIS Web Designer Client for Use in a Browser
The arisloader.cfg file is also stored in this Web directory. This file
controls the download of ARIS Web Designer if you click on a database
shortcut on the main page.
#Certificates Container
certificates=certificates.jar
# External Libraries
jarfile=bsscjhrs.jar:6.2.1.1
jarfile=CnvConnect.jar:6.2.1.1:ignore
jarfile=iaik_jce.jar:6.2.1.1
jarfile=jh.jar:6.2.1.1
jarfile=junit.jar:6.2.1.1:ignore
jarfile=kxml2.jar:6.2.1.1
jarfile=ORBacusClient.jar:6.2.1.1
jarfile=ORBacusSSL.jar:6.2.1.1
jarfile=y.jar:6.2.1.1
ARIS Administration 3
How to Set Up an ARIS Web Designer Client for Use in a Browser
The entry and the environment variables are requested in the following
sequence:
4 Administration ARIS
How to Set Up an ARIS Web Designer Client for Use in a Browser
Install JRE in a path whose directory name must not include any
spaces. Otherwise, JRE cannot be executed.
if (NN) { document.writeln('<EMBED \
WIDTH = "100%" HEIGHT = "100%" \
pluginspage="http://java.sun.com/products/plugin/1.3/plugin-
install.html" \
scriptable=false \'); }
else { document.writeln('<OBJECT classid="clsid:8AD9C840-044E-
11D1-B3E9-00805F499D93" \
WIDTH = "100%" HEIGHT = "100%" \
codebase="http://java.sun.com/products/plugin/1.3/jinstall-13-
win32.cab#Version=1,3,1,0">');
}
However, you can also delete the Internet address or replace it with
the address of the ARIS Web Designer components.
The JRE plug-ins for Netscape and for Microsoft Internet Explorer are
located in the tools\java runtime environment directory.
(j2re1_3_1_06-win-i.exe)
ARIS Administration 5
How to Set Up an ARIS Web Designer Client for Use in a Browser
1. Ensure that the system date matches the current date. This ensures
that the validity of the SSL certificates supplied by IDS Scheer is
checked correctly. These certificates can only be used to exchange
data between ARIS Web Designer and ARIS Business Server.
If the port specified here is in use, you can use another free
port.
6 Administration ARIS
How to Set Up an ARIS Web Designer Client for Use in a Browser
-->
7. From now on, use the index_ssl.html file as the start file for the
databases. This file is located in the /html directory (if only one
language is installed) or the /html<languageid> directory (if
multiple languages are installed).
2. Security Provider.
The Policy files are zipped in the Tools directory of the your ARIS CD
(jce_policy-1_4_2.zip).
You may also download these files from the SUN Web site. In this case
the JCE subdirectory will be created during extraction. Copy the files
from there to the security directory, e. g.
%ARIS_HOME62%\JavaClient\jre\lib\security.
ARIS Administration 7
How to Set Up an ARIS Web Designer Client for Use in a Browser
8 Administration ARIS
How to Set Up an ARIS Web Designer Client for Use in a Browser
ARIS Administration 9
How to Set Up an ARIS Web Designer Client for Use in a Browser
You can undo these settings at any time by replacing false with true in
the relevant line of the file indicated above.
3. The Java Plug-in Control Panel dialog box will open. The name of
the dialog box can vary depending on the version.
4. In the Java Runtime Parameters box on the Basic tab, enter the
characters Xmx, then the size of the main memory you want to make
available in ARIS Web Designer and then an m.
Example: To make available 256 megabyte, enter -Xmx256m. A
value of 256 megabyte is recommended if your computer has a main
memory of 512 megabyte.
10 Administration ARIS
How to Set Up an ARIS Web Designer Client for Use in a Browser
After starting ARIS Toolset or ARIS Web Designer you will find the
cid.bin file in the .ARIS62 subdirectory of the user profile
(%userprofile).
You can copy the ARIS Web Designer JAR files from the aris6.2/lib
directory to a directory on the client computer by software distribution
You can then assign the arishome62 environment variable to this
path.
You can enter an IDS company license key so that users no longer
have to enter a license key when launching ARIS Web Designer for the
first time.
You can enter configuration settings, e.g. default filter or grid width.
You can set up a sample ARIS Web Designer and copy the user.cfg
file generated there to the aris6.2/config directory.
Note: You must delete the session ID in that case.
ARIS Administration 11
How to Set Up an ARIS Web Designer Client for Use in a Browser
2. Open the user.cfg file in a text editor, make your entries (see chapter
2.8.1) and save the file.
The first time a user launches ARIS Web Designer, your settings will be
used. If a user has already used ARIS Web Designer before the
user.cfg file is changed, the user.cfg file on the user's computer must
be deleted.
12 Administration ARIS
How to Set Up an ARIS Web Designer Client for Use in a Browser
You can manage the report scripts using ARIS Site Administrator (see
Online Help).
Reports are opened in the program that is linked to the result format.
For instance, if you have selected RTF as the output format, the report
will be output on the computer on which you have installed ARIS Web
Designer with the connected RTF editor, e.g. Word for Windows.
ARIS Administration 13
How to Set Up an ARIS Web Designer Client for Use in a Browser
bIsOk = False
If bIsOk Then
Begin Dialog UserDialog 440,112,"ARIS Report" ' %GRID:10,7,1,1
OptionGroup.options
OptionButton 20,14,380,14,"Option1"
OptionButton 20,35,380,14,"Option2"
OKButton 210,77,100,21
CancelButton 320,77,100,21
End Dialog
Dim Dlg As UserDialog
End If
If Dlg.options = 0 Then ...
If this report is used as a Web report, an error will occur because the
Dlg.options variable is not globally valid.
14 Administration ARIS
How to Set Up an ARIS Web Designer Client for Use in a Browser
For this reason, ARIS Script contains special methods so that the
dialog boxes, programs and files appear, run or open on the client. The
parameters for these methods can be found in the associated help
files.
You must replace the default methods as shown in the following table:
GetOpenFileName BrowseForFiles
(Win API) Option parameters include = 0. Multiple
selection of files is possible if you increase
this parameter by + 8.
GetSaveFileName BrowseForFiles
(Win-API) Option parameter includes = 3
GetFilePath BrowseForFiles
(Sax Basic)
SHBrowseForFolder BrowseForFolders
(Win-API)
ShellExecute Shell
(Win-API)
ARIS Administration 15
ARIS Process Cost Analyzer
1. Insert the ARIS CD into your CD drive. If the start page is not
displayed automatically, click on the name of your CD drive in
Windows Explorer and double click on the ARIS_62.exe program.
2. Click on Installations.
6. Once you have read and accepted the license agreements, click on
Yes.
16 Administration ARIS
ARIS Process Cost Analyzer
12. Check the check box of the interface and method languages in which
ARIS is to be installed. Click on Next.
13. Check your settings in the summary. If your settings are correct, click
on Next. The program will be installed.
14. If you do not wish to create a desktop shortcut, clear the check box.
Click on Finish. The installation is completed and the installation
program will close.
2. Then install a default server (see chapter ARIS 6.2 Default Server
(Recommended for up to 50 Users) as described in the Installation
Guide).
ARIS Administration 17
ARIS Process Cost Analyzer
Enter the license key you received when you purchased your ARIS
license. Note that a special license key may be necessary for a
combination of several ARIS components. License keys may also have
a time limit.
If you have any questions about your license key, please contact the
IDS Scheer Customer Inter@ction Center (see chapter 12.1).
18 Administration ARIS
ARIS Process Cost Analyzer
In order to be able to use report scripts you have created yourself, you
will require an external server and ARIS Site Administrator. If you
select ARIS Toolset during the client installation, ARIS Site
Administrator is also installed automatically. Alternatively, you can
install the external server (default server or user-defined server) later.
ARIS Administration 19
ARIS Agent
4 ARIS Agent
The following describes how the agent-based system in ARIS can
support you in diagnosing and restoring ARIS services.
Within the system, an ARIS Agent monitors and administers all ARIS
Business Server processes (and the associated ARIS Service) that are
installed on one computer.
20 Administration ARIS
ARIS Agent
<mailserver
state="on"
mail.locale.lang="en"
mail.locale.country="en"
mail.warnings.enable="true"
mail.server.host="172.20.130.233"
mail.server.protocol="smtp"
mail.user.name="adminservice"
mail.user.address="adminservice@ids-scheer.de">
<recipient
mail.recipient.to="adminservice@ids-scheer.de"
mail.recipient.cc="adminservice@ids-scheer.de">
</recipient>
</mailserver>
ARIS Administration 21
ARIS Agent
Possible values:
22 Administration ARIS
Configuration Options
5 Configuration Options
Here you will find a description of the ways you can customize ARIS to
suit your needs by modifying various files.
<AppServerTimer
timeout_interval="90000" />
The following entries specify the intervals at which ARIS Site Manager
checks whether the license service is active:
<licenseservice_client
timeout_interval="300000"
heartbeat_interval="50000" />
ARIS Administration 23
Configuration Options
If this is not the case all licenses used via this ARIS Business Server
will be released.
<lockservice_client
timeout_interval="300000"
heartbeat_interval="50000" />
24 Administration ARIS
Configuration Options
<htmlgen>
<languagelist>
<language tag="de"/>
<language tag="en"/>
<language tag="ja"/>
</languagelist>
You can perform HTML generation manually at any time by running the
htmlgen.bat file in the ARIS Business Server directory.
<backupperiod period="7"/>
ARIS Administration 25
Configuration Options
If you have installed ARIS locally, you will find the file in the <ARIS
installation directory>\LocalServer\config directory.
You only have to change the value shown in bold. The entry in the
example above specifies that the ARIS Business Server may use a
maximum memory of 256 megabyte.
Ports Changed
arislauncher.cfg
agentlauncher.cfg
adminservicelauncher.cfg
arisserver.cfg
In addition, you must also modify the client ports in the following files:
26 Administration ARIS
Configuration Options
siteadmin.cfg
converterclient.cfg
ARIS Administration 27
Configuration Options
5.3.3 Security
To enable SSL, you must add ssl: to the server URL you entered in the
LDAP login server URL attribute for the database. Example:
ssl:ldap://aris:389 (see chapter 5.3.3.3).
If the login process uses SSL, the LDAP server will send its SSL
certificate to the ARIS Business Server. Before the ARIS Business
Server can accept the certificate, this must be entered in the
corresponding file (keystore) of the ARIS Business Server.
28 Administration ARIS
Configuration Options
3. Enter the respective LDAP server URL as the attribute value for each
LDAP login server URL attribute. This has the following structure:
ldap://<server name>:<port number>.
The server name is the name of the LDAP server, the port number is
the number of the port on which the LDAP server receives unencrypted
queries. Example: ldap://aris:389.
To use SSL for encrypted transmission of login data, enter ssl: before
the LDAP server URL. Example: ssl:ldap://aris:389 (see chapter
5.3.3.2). For improved reliability, you can enter up to three LDAP
servers (see chapter 5.3.3.3).
4. Click on File/Save.
7. Select the names of the users who are to log in using the LDAP server.
9. In the Distinguished Name field, for each user enter the name of the
node corresponding to the user and containing the password
information. Whether you use e.g. the unique ID (uid) or the common
name (cn) depends on your LDAP server settings.
The structure of the entry is uid=<username> or
cn=<username>,dc=<directory contact>.
Example: For user Peter Fletcher the entry could be uid=pf,dc=aris.
ARIS Administration 29
Configuration Options
10. Select the LDAP login attribute check box for each user. If this check
box is not selected, login using the LDAP server will not work.
From now on, the users you selected at step 7 will be authenticated using
the LDAP server.
30 Administration ARIS
Configuration Options
ARIS Administration 31
Database Systems
6 Database Systems
For working with ARIS, you can use other database systems than the
standard database system. In the following you will obtain information
on setting up and managing these database systems. As far as the
platform approvals for individual database versions are concerned, the
manufacturer's specifications do apply.
Scale your system in such a way that operation of Oracle does not take
up more than 40% of your RAM. Otherwise, runtime problems may
arise when the ARIS Business Server and other applications are
running on the same computer at the same time.
Once you have installed the Oracle DBMS server you must create an
ARIS instance/database. The following sections detail the table space
and table configurations required for ARIS as well as recommended
Oracle system parameters.
32 Administration ARIS
Database Systems
Table Default Default Default PCT Default Size of Data File Next
Space INITIAL NEXT INCREASE MAXEXTENT Extension
Total 3.5 GB
Taking all of the sizes of these tablespaces together, it is clear that for
all ARIS databases, approximately 3.5 GB of hard disk space is
required initially on the Oracle server.
Tablespace Parameters
Since most tables derive their parameters from the tablespaces, it is
important to ensure that the standard storage parameters of the table
spaces (INITIAL, NEXT) are set up in line with the quantity of data to
be stored in the database.
ARIS Administration 33
Database Systems
Name Contents
ArisData Tables
Autoextend on
Maxsize=100 MB
NextExtent=5 MB
Autoextend on
Nextextent=10 MB
Rollback Segments 28 segments with an initial size of
around 4 MB
34 Administration ARIS
Database Systems
Parameter Description
ARIS Administration 35
Database Systems
Parameter Description
execute dbms_utility.analyze_schema('<oracle_user>',
'COMPUTE');
Call the Maintain function in the ARIS Admin tool for the corresponding
databases (see chapter 9.3.11).
36 Administration ARIS
Database Systems
ARIS Administration 37
Database Systems
1. Open the DOS Box (or a shell under UNIX) and switch to the
setups\oracle directory on the ARIS CD.
3. Run the aris62.bat batch file (under UNIX the aris62.sh file) by
entering the file name, the user name and password of the Oracle
system user, and the path to the ARIS installation scripts. In step 1,
you switched to the directory containing the ARIS installation scripts.
Therefore this is shown as the current directory in the following
command sequence.
38 Administration ARIS
Database Systems
Please read this section if you intend to use ARIS with Microsoft SQL
Server.
If you are installing Microsoft SQL Server yourself, always follow the
installation instructions in the Microsoft SQL Server installation guide.
Microsoft SQL Server 2000 Standard for installing the SQL server on
a Microsoft server
If you want to use this server, you must buy it from Microsoft.
After installing Microsoft SQL Server, install Service Pack 3a for the
SQL server. Otherwise the SQL server cannot function properly.
ARIS Administration 39
Database Systems
2. In the tree view, browse to the newly installed SQL server via
Services and Applications and Microsoft SQL Servers.
6. If the SQL server is the main application on the computer, you can
make additional resources available to it. On the Processor tab,
enable the Boost SQL Server priority on Windows check box.
7. If you are using a computer with more than one processor, enable Use
Windows NT Fibers. We recommend this approach so that more NT
fibers are used as threads. This also improves performance when
switching between and generating threads.
40 Administration ARIS
Database Systems
11. On the General tab, set Automatic as the start type for SQL server
and server agent.
Please enter two existing paths for the two paths of the files aris_dat
and aris_log (see Assignments).
ARIS Administration 41
Database Systems
A prerequisite for this is that the ARIS main user has the
privileges needed to change the SQL server tables. This
privilege is assigned to the ARIS62 user by the
enhancedProcedures.sql script.
Proceed as follows:
1. You must copy the scripts to your hard drive! You need write
privileges in the target directory to store the logfiles from the
installation.
2. Open the DOS box for the directory to which you have copied the
aris62AutoAdmin.bat file and the SQL scripts.
42 Administration ARIS
Database Systems
Script Description
init.sql Generates the ARIS instance.
installaris62.sql Generates the ARIS62 ARIS main user and assigns
its access privileges to it.
aris_23.sql Generates the procedures required for the ARIS
databases in the ARIS23 scheme.
aris_22.sql Generates the procedures required for ARIS
databases in the ARIS22 scheme.
aris_21.sql Generates the procedures required for ARIS
databases in the ARIS21 scheme.
bo_2.sql Generates the procedures required for ARIS
databases in the BO (Business Optimizer) scheme.
enhancedProcedures.sql Assigns the privilege of creating users to the
ARIS62 ARIS main user.
initialDatabases.sql Generates the first database in the DB_STOCK
table.
recycler.sql Job of the SQL server agent. This job removes
deleted databases at midnight each night. This
makes users of deleted databases available again.
Proceed as follows:
1. Open the DOS box for the directory to which you have copied the
aris62SelfAdmin.bat file and the SQL scripts.
ARIS Administration 43
Database Systems
Script Description
init.sql Generates the ARIS instance.
installaris62.sql Generates the ARIS62 ARIS main user and assigns
its access privileges to it.
aris_23.sql Generates the procedures required for the ARIS
databases in the ARIS23 scheme.
aris_22.sql Generates the procedures required for ARIS
databases in the ARIS22 scheme.
aris_21.sql Generates the procedures required for ARIS
databases in the ARIS21 scheme.
bo_2.sql Generates the procedures required for ARIS
databases in the BO (Business Optimizer) scheme.
initialDatabases.sql Generates the first database in the DB_STOCK
table.
recycler.sql Job of the SQL server agent. This job removes
deleted databases at midnight each night. This
makes users of deleted databases available again.
44 Administration ARIS
Database Systems
Recycling
1. Open the DOS box for the directory to which you have copied the SQL
scripts.
Refilling
1. Open the DOS box for the directory to which you have copied the SQL
scripts.
1. Open the DOS box for the directory to which you have copied the SQL
scripts.
ARIS Administration 45
Database Systems
Before you launch the ARIS Server, please download the following
Microsoft JDBC drivers from the Microsoft homepage and replace the
placeholder files with them:
msbase.jar
mssqlserver.jar
msutil.jar
46 Administration ARIS
Database Systems
Read this section if you intend to use ARIS with IBM DB2.
If you are installing IBM DB2 yourself, always follow the installation
instructions given in the IBM DB2 installation guide.
Java-StoredProcedures
These are located in the JAR file aris62db2.jar in the Setups\DB2
directory on the ARIS CD.
ARIS@DB2 scripts
These scripts are located in the Setups\ DB2 directory on the ARIS
CD.
ARIS Administration 47
Database Systems
3. If you use a name other than ARIS for the database, please replace
the character string ARIS in the various scripts and configuration files
with the name you have used.
4. Select SMS Table Areas when configuring the default table areas.
1. Create a buffer pool with the name ARISBP, page size 8K and number
of pages 20000.
2. Create the ARISDATA table area for recording the ARIS data on the
following basis:
Type Regular
Page size 8K
3. Create the ARISINDEX table area for recording the indexes on the
same basis as the ARISDATA table area.
48 Administration ARIS
Database Systems
4. Create the ARISLOB table area for recording the LOB objects on the
following basis:
Type Large
Page size 4K
5. Create the ARISTEMP table area for recording the temporary data on
the following basis:
Page size 8K
LOGFILSIZ 5000
LOGPRIMARY 5
LOGSECOND 5
MAXLOCKS=35
MAXAPPLS=1000
LOCKLIST=10000
MAXAGENTS=1000
ARIS Administration 49
Database Systems
CALL sqlj.install_jar('file:E:/Program
Files/.../aris62db2.jar','aris62_jar');
3. Replace the path with the path to the aris62db2.jar file on your DB2
database computer.
4. If you have called the DB2 database something other than ARIS (see
chapter 6.3.3.1), please modify the connection call for the script
accordingly. Under Windows, this is:
5. In the line indicated above, also specify the password for the
db2admin DB2 user.
6. If you do not want the DB2 user ARIS62 created with this script to
have the DBADM privilege, comment out the following line:
are using a database name other than ARIS (see chapter 6.3.3.1)
and/or
50 Administration ARIS
Database Systems
3. If you have used a name other than ARIS for your database, replace
ARIS with that name.
4. If you are using a port number other than 50000, replace this with the
port number you used for DB2.
5. If you have not given the user ARI62 a DBADM privilege, enter the
line schema_management="manual". This indicates that you will
manage the databases manually (see chapter 6.3.5.2).
6.3.5.1 Auto-Management
If you have given ARIS the DBADM privilege via the user ARIS62 (see
chapter 6.3.3.4), ARIS assumes complete administration of the ARIS
databases. Every time a new ARIS database is required, ARIS creates
database objects (scheme, tables etc.) in which the contents of the
ARIS database are saved. ARIS also deletes database objects if an
ARIS database is to be deleted.
ARIS Administration 51
Database Systems
As ARIS only connects to the ARIS62 user and this does not require
the DBADM privilege for the manual procedure, ARIS can get by with a
minimum of privileges.
1. Connect to the DB2 database as a user with the DBADM privilege, e.g.
as user db2admin.
52 Administration ARIS
Database Systems
1. To list all used and unused DB2 schemes, run the following SQL
statement:
If you now create a new ARIS database in ARIS, ARIS uses the
db_stock table to check whether a suitable scheme is available. If so,
the entry is removed from the db_stock table and a new entry is
inserted in the dblist table.
2. To list all currently used DB2 schemes, run the following SQL
statement:
3. To list all DB2 schemes that are no longer needed, run the following
SQL statement:
To delete all DB2 schemes listed in the db_trash table, execute the
following procedure:
ARIS Administration 53
Database Systems
For example, if you want to restore a version 6.1.1 ADB file (backed up
ARIS database) to the DB2 database, transfer the ARIS scheme
version 22 to the procedure in the second argument:
54 Administration ARIS
Additional Information
7 Additional Information
This section provides information for example on backing up databases
or program timing.
A maintenance license key may only be used for an ARIS Client with
which you perform maintenance tasks, automatic exports with ARIS
Web Publisher, or generate reports.
You are not permitted to perform modeling with this ARIS Client.
2. Make your settings and then close the installation. Using the -r
parameter creates the setup.iss file in your Windows directory.
3. Create a new directory on your hard disk and copy the files of the
installation program and all its subdirectories to this new directory.
4. Then copy the setup.iss file to the new directory as well, so that it is
in the same location as the setup.exe file.
5. Copy the newly created directory to all the computers on which you
want to carry out an identical installation.
ARIS Administration 55
Additional Information
Once you have entered the new license key you will be able to install
ARIS API.
The format for the filter keys that are used in the ArisConfigInit()
API function has been changed. The existing keys (e.g. FULLMETHOD
or EASYFILTER) are no longer recognized. Instead you will have to use
the new keys. The new keys are made up of the GUID of the desired
filter.
ArisConfigInit( hDatabase,
"DD838074-AC29-11D4-85B8-00005A4053FF", &Error );
You can look up which GUID belongs to which configuration filter in the
ARIS Toolset Configuration Wizard.
56 Administration ARIS
Additional Information
ARIS Converter is the program you use to convert data from ARIS 4.x,
ARIS 5.x and ARIS 6.x formats for work with ARIS 6 Collaborative
Suite, Version 6.2 irrespective of the server platform or the database
management system you are using. The 6.2 conversion enables you to
transfer your databases from one database system to another. For
example, if you have created a user database under Oracle for ARIS
6.2, you can use ARIS Converter to specify that this database is to be
transferred to your local ARIS Toolset with the standard database
system.
You can transfer ARIS Version 4.0 databases with ARIS Converter, but
you will need to use ACD files. ACD files (ACD = ARIS Compressed
Database) represent the file format in which ARIS databases of version
5.x are saved.
Databases of the ARIS Versions 4.11 and 5.0 can be converted using a
database directory or an ACD file (see table on page Fehler!
Textmarke nicht definiert.). If you transfer the databases using a
database directory, you can also convert the configuration data. If you
ARIS Administration 57
Additional Information
The only exception to this is ARIS 6.0.0. Before you can create a
connection between ARIS Converter and the ARIS 6.0 server, you must
replace a number of files in the lib directory of your ARIS 6.0.0
installation. These files are located in the Tools\ARIS 60 Converter
Patch directory on the ARIS CD.
1. Use ARIS Admintool to backup all user databases. Use the arisadm62
backup all <directory> command (see chapter 9.3.1). If you are
running ARIS Admintool in interactive mode (see chapter 9.1) enter
backup all <directory>.
2. If you are working with ARIS Process Cost Analyzer: Backup all PCA
databases using ARIS PCA Site Administrator (see chapter 3.5).
It is not possible to back up the PCA databases using the arisadm62
tool or a command line interface. If you want to run an automatic
scheduled backup of your PCA databases and you are using Oracle as
your database management system, you must do this with an Oracle
DUMP. On the other hand, if you are using the ARIS standard database
system, to preserve consistency the ARIS Server must be shut down
and the backup carried out on a file basis.
58 Administration ARIS
Additional Information
ARIS Administration 59
Transferring Data from Earlier Versions of ARIS
You can use data from version ARIS 4.0 and higher in ARIS 6
Collaborative Suite. Using ARIS Converter you can transfer user
databases. You can transfer configuration databases from version 4.11
and higher if the data are not present in ACD files, but in an ARIS
database directory. An ARIS database directory is a directory of an
ARIS installation of the versions 4.11 or 5.x, containing respectively an
60 Administration ARIS
Transferring Data from Earlier Versions of ARIS
active ARIS database. The directory and the database have the same
name. It contains the files objects.dat and objects.idx.
In a data folder
4. Click on Next.
5. Select the option button of the ARIS version to be used as source for
conversion.
6. Click on Next.
7. Select the source where the ARIS user database is located which you
want to transfer to your new ARIS installation. Depending on the
choice you made above you will now have one or more of the following
options:
ARIS Administration 61
Transferring Data from Earlier Versions of ARIS
Local system
Enter the path name of the database directory. To search for the
directory, click on the Browse (...) button. The path name must not
contain any special characters.
Enter the path and file name. To search for the file, click on the
Browse (...) button. The path name must not contain any special
characters.
8. Click on Next.
62 Administration ARIS
Transferring Data from Earlier Versions of ARIS
11. To also transfer the configuration database items, keep the settings,
i.e. all check boxes will be enabled. This will have the following effects:
13. Enter the password for the database administrator and the configuration
database of the source server.
15. Enter the password for the database administrator and the configuration
database of the target server.
17. You will see all of the settings that you made in the wizard. Click on
Finish to begin transferring the data. The converted database will now
be saved. If the name already exists, a number will be appended to it.
During data transfer you will receive information in a dialog box. To
cancel the data transfer click on Cancel.
18. During the transfer of databases in ACD format, versions 4x and 5.0
ARIS Administration 63
Transferring Data from Earlier Versions of ARIS
19. Once the data transfer has been completed successfully, click on OK.
ARIS Converter will close.
When you transfer item groups with ARIS Converter, the reference to
the respective database will not be affected. In other words, the
assignment of user-defined symbols to objects in the databases will
still be available.
64 Administration ARIS
Transferring Data from Earlier Versions of ARIS
1. Run the ARIS version from which you want to export data.
3. One after the other, export all the filters, templates and chart
definitions with which you wish to work in ARIS 6. To do this, click on
the plus sign (+) in the tree view next to the server from whose
configuration database you wish to export the filter, template or chart
definition.
If you are exporting filters you must select Export (XML). You can
only import into ARIS 6 filters that you have exported using this export
format.
1. Run ARIS 6.
3. Click on the plus sign (+) in the tree view next to the server into
whose configuration database you wish to import the filter, template or
chart definition.
4. In the tree view right click on the configuration database and select
Import/Filter, Import/Template or Import/Chart Definition.
ARIS Administration 65
Transferring Data from Earlier Versions of ARIS
6. Select the import file and click on Open. The file will be imported.
Proceed as follows:
1. Run ARIS 6.
3. Click on the plus sign (+) in the tree view next to the server into
whose configuration database you wish to import the filter, template or
chart definition.
4. In the tree view right click on the configuration database and select
Import/Filter, Import/Template or Import/Chart Definition.
6. Select the import file and click on Open. The file will be imported.
Proceed as follows:
66 Administration ARIS
Transferring Data from Earlier Versions of ARIS
3. Click on Select Scripts. You will see a dialog box in which you can
select all the scripts you wish to update.
4. Click on OK when you have selected all of the scripts. You will see a
list of all of the scripts with path details.
5. To add more scripts from different directories to the list, repeat steps 3
and 4 until you have added all the scripts to the list.
6. Click on Convert. ARIS Script Converter will now update all the listed
scripts. This procedure may take a moment. A status bar will be
displayed in the lower portion of the dialog box.
If not all of the scripts have been updated, you will be advised of
the scripts in question and the reason why ARIS Script Converter
did not update them. Read-only scripts cannot be updated, for
instance. Scripts that were not updated will remain on the list.
1. Copy the configuration files and the semantic check scripts to the
corresponding semantic check directory of the newly installed ARIS
version.
2. Update these scripts using ARIS Script Converter (see chapter 8.3).
ARIS Administration 67
Transferring Data from Earlier Versions of ARIS
Text export
ARIS 4.x text exports cannot be imported into ARIS 6.
68 Administration ARIS
ARIS Admintool
9 ARIS Admintool
You can use ARIS Admintool to manage the ARIS databases on a
server. The program is a console application (MS DOS program) and is
executed in the MS DOS input window. The individual commands of
the program are supplied as command line parameters. The program
gives you information about the success and effect of each executed
command.
Option Description
ARIS Administration 69
ARIS Admintool
Option Description
-l <file name> Activates logging of all program operations. The log file will indicate
when which operation was performed and with what result.
If you do not enter a server name (-s), the function will be executed
on the LOCAL server.
Example: You wish to recreate the Sales Data database under the
name Sales Data 2002. In interactive mode, enter the following:
70 Administration ARIS
ARIS Admintool
9.3.1 Backup
Backs up a database as a compressed file with the .ADB (ARIS
database) file extension to a folder of your choice.
The name of the backup file consists of the name of the database
followed by the .ADB file extension.
If a file of the same name already exists in the backup directory, it will
be overwritten.
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.1.1 Example
The Project database to be backed up is located on the LOCAL
server. The Database Administrator's password is DBADMIN. The
backup file is to be saved to the Backup folder on a diskette.
Proceed as follows:
ARIS Administration 71
ARIS Admintool
9.3.2 Backupconfig
Savesthe ARIS configuration data (filters, templates and charts) to the
specified directory in the appropriate file format (see chapter 8.2.3).
To save the ARIS configuration data, enter the following command call
and then press Enter:
72 Administration ARIS
ARIS Admintool
9.3.3 Copy
Copies databases to a server and registers them there.
To copy a database, enter the following command call and then press
Enter:
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
Example
The SalesDB database is to be duplicated on the LOCAL server. The
Database Administrator's password is DBADMIN. The copy of the
database is to have the name New SalesDB.
Proceed as follows:
ARIS Administration 73
ARIS Admintool
9.3.4 Dbmspassword
Changes the password for the DBMS user. This change is helpful if the
DBMS (database management system) used is also used by
applications other than ARIS. This may be the case with the Oracle
DBMS. The Oracle DBMS user is called ARIS62. The default password
is arisadmin (lowercase).
dbmspassword
You are then asked for the current and the new passwords. You are
also asked for the database administrator password (uppercase
DBADMIN by default) if you have not had to enter it until now.
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space. You can then add both the new and the
old password , e.g. arisadm62 dbmspassword <password>
<oldpassword>.
9.3.5 Delete
Removes a database from the database server and deregisters it.
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.6 Exit
Exits the interactive mode and ARIS Admintool. The Exit command
can only be executed in interactive mode.
exit
74 Administration ARIS
ARIS Admintool
9.3.7 Help
Displays a help text for every available command. This describes the
actions that will be performed as a consequence of the command, as
well as the parameters that must be entered with the command.
To call help for a specific command, enter the following command call
and then press Enter:
help <command>
help more
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.8 Interactive
Switches ARIS Admintool to a mode in which you can enter several
commands in a prompt sequence without having to exit the program.
To do this, you only have to log on to each server once.
interactive
9.3.9 Kill
Terminates all connections of a user to databases on the selected
database server. This connection is identified by the connection ID that
you can display using the Sessions command.
ARIS Administration 75
ARIS Admintool
kill <all>
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.10 List
Displays all databases that are registered on a database server and
can be opened by ARIS.
To display all the databases that can be opened by ARIS, type in the
following function call and then press Enter:
list
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.11 Maintain
Runs maintenance of the specified database. Maintenance is database
system-specific, which means that a set number of maintenance tasks
is performed depending on the database. Refer to your database
management system documentation for information regarding specific
maintenance tasks.
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
76 Administration ARIS
ARIS Admintool
9.3.12 Password
Changes the database administrator password for the specified server.
First, the current password must be entered.
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.13 Rename
Renames a database.
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.14 Reorg
Reorganizes a database.
If you are using an object library, you should not activate this option
since it may be desired and intended for certain definitions to be
created that have no occurrences.
Objects that are referenced by tables of the ARIS ABC component are
ignored for purposes of the reorganization. To reorganize a database,
enter the following command call and then press Enter:
ARIS Administration 77
ARIS Admintool
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.15 Restore
Imports databases that have been saved as ADB files onto the current
database server and registers them there.
A database that has the same name as the one to be imported may
not exist in the database directory. You are therefore given the
opportunity to rename the database when importing.
To import an ADB file and rename it at the same time, enter the
following command and then press Enter:
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
Example
The Project database is to be restored and registered on the LOCAL
server. The Database Administrator's password is DBADMIN. The
project.adb file is located in the restore directory on a diskette.
Proceed as follows:
78 Administration ARIS
ARIS Admintool
restore a:\restore\project
9.3.16 Restoreconfig
Restores the ARIS configuration data (filters, templates and charts)
from an ACB file.
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
To access ARIS Process Cost Analyzer databases (see chapter 3), enter
the following command call and then press the Enter key:
schemecontext pca
If you now use the commands List (see chapter 9.3.10) or Backup
(see chapter 9.3.1), they refer exclusively to PCA databases.
ARIS Administration 79
ARIS Admintool
9.3.18 Server
Can only be executed in interactive mode. This terminates the current
connection to the server and permits the establishment of a new
connection with another server. All commands that are entered
thereafter relate to the new server.
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.19 Sessions
Displays all users who are logged in to a database on the specified
server.
The TCP/IP host name of the computer via which the particular user
has logged in to the database
User name
Connection ID
The value displayed for the user name will be the one specified in the
Username environmental variable of the computer from which the
user logged in to the database. Under Windows NT this value is set
automatically during login.
You have the following options for displaying information about all
current users of databases on the listed server.
session byuser
80 Administration ARIS
ARIS Admintool
session bydatabase
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.20 Statistic
Displays the following information for the evaluated database:
All models
All users
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
9.3.21 Status
Displays the status of a client-server connection.
status <server>
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
ARIS Administration 81
ARIS Admintool
9.3.22 Version
Issues the version numbers for all Dynamic Link Libraries (DLLs) used
by ARIS. These are the DLLs of the system in which ARIS Admintool
was launched.
version
When you are not in interactive mode, the command must be preceded
by arisadm62 and a space.
82 Administration ARIS
Hardware and Software Requirements
For specific cases, please contact the IDS Scheer Customer Inter@ction
Center (see chapter 12.1).
ARIS Administration 83
Hardware and Software Requirements
Graphics Card
At least SVGA
Network
100 Mbit network between database server and ARIS Business Server
84 Administration ARIS
Hardware and Software Requirements
HP UX 11.11
Network Communication
TCP/IP
ARIS Administration 85
Hardware and Software Requirements
ARIS Converter
Processor: Intel Pentium III 450 MHz, 256 MB RAM (for Windows 2000
+ 32 MB RAM)
Graphics Card
Minimum: SVGA
Network
86 Administration ARIS
Hardware and Software Requirements
HP UX 11.11
To carry out mySAP Synchronization with SAP Solution Manager, JRE
1.4.1 32 bit version and SAP Java Connector (JCo) version 2.11 must
be installed.
If you are using ARIS Web Report Server, you will have to have
installed Microsoft Office so that the DOC and XLS output formats can
be generated.
If you intend to convert databases, all applications whose COM objects
you are using in ARIS databases must also be installed. When
converting databases that contain links to Microsoft Word and
Microsoft Excel documents, Microsoft Word and Microsoft Excel Version
97 or higher must be installed.
Network Communication
TCP/IP
ARIS Administration 87
Hardware and Software Requirements
Processor: Intel Pentium III 450 MHz, 128 MB RAM (for Windows 2000
and Windows XP Professional + 32 MB RAM)
Graphics Card
If you run Norton AntiVirus under Windows XP, you will not be
able to display or insert embedded WinWord documents in
opened models.
Network Communication
TCP/IP
88 Administration ARIS
Hardware and Software Requirements
Processor: Intel Pentium II 233 MHz, 128 MB RAM (for Windows 2000
and Windows XP Professional + 32 MB RAM)
375 MB free hard disk space + sufficient space for all user databases
(e.g. an SAP reference model database requires 450 MB)
Processor: Intel Pentium III 450 MHz, 256 MB RAM (for Windows 2000
and Windows XP Professional + 32 MB RAM)
Graphics Card
If you run Norton AntiVirus under Windows XP, you will not be
able to display or insert embedded WinWord documents in
opened models.
Network Communication
TCP/IP
ARIS Administration 89
Hardware and Software Requirements
Main memory:
128 MB RAM (in addition to the 128 MB RAM recommended for ARIS
Toolset) When using ARIS under Windows 2000 or Windows XP
Professional, the minimum system requirement is 160 MB RAM)
Besides the ARIS Toolset system requirements, for ARIS Web Publisher
you will also need:
Main memory:
128 MB RAM (in addition to the 128 MB RAM recommended for ARIS
Toolset) When using ARIS under Windows 2000 or Windows XP
Professional, the minimum system requirement is 160 MB RAM)
File system:
Recommended: NTFS. NTFS is necessary for larger exports (large
number of files).
Screen resolution:
640 x 480 (SVGA), 256 colors. Recommended: 1024 x 768, at least
256 colors
Platform:
Web Publisher exports are platform-independent. Certain system add-
ons require Microsoft Windows, e.g. ARIS mySAP Connectivity for ARIS
Web Publisher and Connectivity for Lotus Notes.
90 Administration ARIS
Hardware and Software Requirements
Intranet publishing:
If you are sharing your Web Publisher exports on the intranet, we
recommend publishing the files on a WWW server, not on a file server.
System font:
Small fonts
Processor:
Intel Pentium 166 MHz, 128 MB RAM
Screen resolution:
Recommended: 1024 x 768, minimum 256 colors
Browser:
Microsoft Internet Explorer, version 4.01 or higher + Service Pack 1,
5.01 + Service Pack 2, 5.5 + Service Pack 2 or 6.0 + Service Pack 1.
Exception: Version 5.0, which may cause graphics to be displayed
incorrectly.
Netscape Navigator, version 4.01 or higher, version 4.73 + Crypto API
2.0.
Versions released after this manual has been sent to press may not
have been approved by IDS Scheer, but they can probably be used.
ARIS Administration 91
Hardware and Software Requirements
Apache Web Server 1.3.6 and Apache HTTP Server 2.0 under Windows
with active component, either ASP or PERL. TCP/IP network
communication
You can use any Web server, since no active components are required.
The Web servers listed under WWW Server (for Role-Based Access to
Web Exports) have been tested.
If you work with SAPGUI 4.6, the librfc.dll file must be deleted from
the C:\Program Files\ARIS6.2\Web Publisher directory and the
ARIS installation directory.
92 Administration ARIS
Hardware and Software Requirements
Office 97 [MS Excel 97 (Service Pack 2), MS Excel 2000 with 7 MB free
disk space in the <temp> directory], Office 2000, Office XP or Office
2003.
ARIS Report
Office 97, Office 2000, Office XP or Office 2003. If you output reports
in the Office 2003 Word DOC format, presentation errors may occur.
PCA Reports
Processor: Intel Pentium II 450 MHz, 128 MB RAM (for Windows 2000
or Windows XP Professional + 32 MB RAM), 128 MB Swap File
Graphics Card
ARIS Administration 93
Hardware and Software Requirements
Bandwidth
Minimum: 56 k modem
If you run Norton AntiVirus under Windows XP, you will not be
able to display or insert embedded WinWord documents in
opened models.
Browser
Netscape Navigator version 4.73 + Crypto API 2.0 and version 6.22.
Versions released after this manual has been sent to press may not
have been approved by IDS Scheer, but they can probably be used.
94 Administration ARIS
Hardware and Software Requirements
If you are working with Microsoft Internet Explorer and Java Runtime
Environment (JRE) is not installed and is to be downloaded, you must
make the following settings in the Tools/Internet
Options/Security/Custom Level menu in Microsoft Internet
Explorer:
Netscape Navigator
If you are working with Netscape Navigator, you must adjust your
browser settings to enable Javascript to be run
(Edit/Settings/Extended button).
Network Communication
TCP/IP
The following Web server has been tested and approved for
operation with ARIS Web Designer
Apache Web Server 1.3.6 and Apache HTTP Server 2.0 under Windows
Network Communication
TCP/IP
ARIS Administration 95
Hardware and Software Requirements
Graphics Card
Browser
Network Communication
TCP/IP
96 Administration ARIS
Hardware and Software Requirements
ARIS Administration 97
Glossary
11 Glossary
Term Meaning
ARIS Agent Program that autonomously monitors and manages ARIS Business
Server processes.
ARIS Site One or more ARIS Business Servers, a database server and an
ARIS Site Manager.
ARIS Converter ARIS 6 conversion component. It converts ARIS data from earlier
versions of ARIS into the current ARIS format.
Database Server Computer on which the ARIS Repository is installed. ARIS Clients
access the database server on which the ARIS Repository
containing the ARIS databases resides via the ARIS Business
Server.
ARIS Easy Design ARIS Client that provides the functionality of ARIS Toolset tailored
to the operational departments.
ARIS HTML Program module that automatically generates the HTML files
Generator needed by ARIS Web Designer when ARIS Web Designer is used
via a browser.
ARIS Site Central component of ARIS Site that, for instance, coordinates
Manager access to programs and data by means of a license and lock
service.
ARIS PCA Site Administration component that can be used to administer ARIS
Administrator Process Cost Analyzer databases and reports.
ARIS Toolset ARIS Client used to model, analyze and simulate business
processes etc.
98 Administration ARIS
Glossary
Term Meaning
ARIS Web Modeling tool in ARIS 6 Collaborative Suite that runs within a
Designer browser or as an application (see chapter 2.4) and that can be
used in a LAN and a WAN. ARIS Web Designer thus enables as it
were Internet modeling of business processes.
ARIS Web Report "Point of contact" between ARIS Web Designer and ARIS Toolset.
Server Using this server, ARIS Web Designer activates report generation
in ARIS Toolset.
ARIS Web WWW components accessed by ARIS Web Designer when ARIS
Designer Web Designer is started via a browser.
components
Firewall Technology (hardware and/or software) that controls the data flow
between internal and external (unprotected) networks and
provides protective mechanisms to combat unauthorized access.
LAN Local Area Network. Network within a company. This network has
broad bandwidth.
Load Distribution Distribution of the network load per application server. The more
transport transactions are required, the higher the utilization of a
network.
ARIS Administration 99
Glossary
Term Meaning
SSL Secure Socket Layer. Security software for encrypting data that is
exchanged between programs.
WAN Wide Area Network. Network that transports data both within the
company network and via the Internet. This network has low
bandwidth.
Web server A server containing the HTML pages, images, documents and
other files and folders that users or programs within a network can
access.
12 Appendix
Online support
Service Hotline
++49 (0) 6 81-2 10 12 12 (Europa)
++33 (0) 825 324 325 (Frankreich)
++44 (0) 121 767 1928 (Grobritannien)
++1 888 212 54 39 (Amerika)
++81 (0) 3 35 16 74 31 (Asien)
Web Services
www.ids-scheer.com/support
E-Mail
ids-service@ids-scheer.de
12.4 Copyright
Registered trademarks of the Microsoft Corporation include:
MS Excel
MS Internet Explorer
Visual Basic
Windows 2000
Windows 95/98
Windows NT
Windows XP
13 Index
Admintool Run as application 9
General 69 Run in browser 9
ARIS ARIS Web Designer
LDAP settings 29 Applet 10
ARIS 6-datenbank 32 Character sets 9
ARIS Admintool File storage 3
Backup 71 Installed files 3
Backupconfig 72 JAR-files 3
Command line 69 Procedure 2
Commands 70 Provide additional memory 10
Copy 73 Run as application 9
Dbmspassword 74 Run in browser 9
Delete 74 Setup 2
Exit 74 ARIS Web Designer components 24
General information 69 ARIS Web Report Server 13
Help 75 Hardware requirements 13
Interactive 75 Report files 13
Interactive mode 69 arishome60 4
Kill 75 arisserver.cfg
List 76 Entry "mail.locale.country" 22
Maintain 76 Entry "mail.locale.lang" 22
Password 77 Entry "mail.recipient.cc" 22
Rename 77 Entry "mail.recipient.to" 22
Reorg 77 Entry "mail.server.host" 22
Restore 78 Entry "mail.server.protocol" 22
Restoreconfig 79 Entry "mail.user.address" 22
Server 80 Entry "mail.user.name" 22
Sessions 80 Entry "mail.warnings.enable" 22
Statistics 81 Entry "state" 22
Status 81 Backup 25
Version 82 Automate 72
ARIS Agent 20 Database 58
Shut down 20 Example 71
ARIS API PCA Databases 18
Continued use of programs 56 Scheduled 58
ARIS Business Server Using batch program 72
Processes 20 Using Windows NT 72
Provide memory 26 Company license key 11
ARIS Converter 57 Configuration database
ARIS instance 32 Transfer item groups 64
ARIS Notify Service 21 Transfer items 65
ARIS PCA Site Administrator 18 Configuration file 59
ARIS Process Cost Analyzer 16 Connection
ARIS UML Designer