Documente Academic
Documente Profesional
Documente Cultură
General Part
Trade name of the construction product Injection system Hilti HIT-HY 200-A
This European Technical Assessment is Guideline for European technical approval of "Metal
issued in accordance with Regulation (EU) anchors for use in concrete", ETAG 001 Part 5: "Bonded
No 305/2011, on the basis of anchors", April 2013,
used as European Assessment Document (EAD)
according to Article 66 Paragraph 3 of Regulation (EU)
No 305/2011.
Z14440.15 8.06.01-250/14
European Technical Assessment
ETA-11/0493 Page 2 of 33 | 15 April 2015
English translation prepared by DIBt
The European Technical Assessment is issued by the Technical Assessment Body in its official language.
Translations of this European Technical Assessment in other languages shall fully correspond to the
original issued document and shall be identified as such.
Communication of this European Technical Assessment, including transmission by electronic means,
shall be in full. However, partial reproduction may only be made with the written consent of the issuing
Technical Assessment Body. Any partial reproduction has to be identified as such.
This European Technical Assessment may be withdrawn by the issuing Technical Assessment Body, in
particular pursuant to information by the Commission according to Article 25 Paragraph 3 of Regulation
(EU) No 305/2011.
Electronic copy of the ETA by DIBt: ETA-11/0493
Z14440.15 8.06.01-250/14
European Technical Assessment
ETA-11/0493 Page 3 of 33 | 15 April 2015
English translation prepared by DIBt
Specific Part
The Injection system Hilti HIT-HY 200-A is a bonded anchor consisting of a foil pack with
injection mortar Hilti HIT-HY 200-A and a steel element. The steel element consist of
a threaded rod HIT-V or a commercial threaded rod with washer and hexagon nut in the
range of M8 to M30 or
an internal threaded sleeve HIS-(R)N in the range of M8 to M20 or
Hilti tension anchor HZA M12 to M27
Hilti tension anchor HZA-R M12 to M24 or
Reinforcing bar (rebar) of sizes = 8 to 32 mm.
The steel element is placed into a drilled hole filled with injection mortar and is anchored via the
bond between metal part, injection mortar and concrete.
The product description is given in Annex A.
The performances given in Section 3 are only valid if the anchor is used in compliance with the
specifications and conditions given in Annex B.
The verifications and assessment methods on which this European Technical Assessment is
based lead to the assumption of a working life of the anchor of at least 50 years. The indications
given on the working life cannot be interpreted as a guarantee given by the producer, but are to
be regarded only as a means for choosing the right products in relation to the expected
economically reasonable working life of the works.
3 Performance of the product and references to the methods used for its assessment
Z14440.15 8.06.01-250/14
European Technical Assessment
ETA-11/0493 Page 4 of 33 | 15 April 2015
English translation prepared by DIBt
According to Decision of the Commission of 24 June 1996 (96/582/EC) (OJ L 254 of 08.10.96
p. 62-65), the system of assessment and verification of constancy of performance (see Annex V
and Article 65 Paragraph 2 to Regulation (EU) No 305/2011) given in the following table applies.
Product Intended use Level or class System
For fixing and/or supporting
Metal anchors for use in
concrete structural elements or
concrete (heavy-duty 1
heavy units such as cladding and
Electronic copy of the ETA by DIBt: ETA-11/0493
type)
suspended ceilings
5 Technical details necessary for the implementation of the AVCP system, as provided for
in the applicable European Assessment Document
Technical details necessary for the implementation of the AVCP system are laid down in the
control plan deposited at Deutsches Institut fr Bautechnik.
Z14440.15 8.06.01-250/14
Page 5 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 6 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 7 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 8 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 9 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 10 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 11 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 12 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 13 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 14 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 15 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 16 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 17 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 18 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 19 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 20 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 21 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 22 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 23 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 24 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 25 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 26 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 27 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 28 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 29 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 30 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 31 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 32 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14
Page 33 of European Technical Assessment
ETA-11/0493 of 15 April 2015
Z25123.15 8.06.01-250/14