Documente Academic
Documente Profesional
Documente Cultură
dealers Global>>>
The LiuGong series of logos herein, including but not limited to word marks, device marks, letter of alphabet marks and combination marks, as the
registered trademarks of Guangxi Liugong Group Co., Ltd. are used by Guangxi Liugong Machinery Co., Ltd. with legal permission, and shall not be used
without permission. Specifications and designs are subject to change without notice. Machines shown may include optional equipment and may not
include all standard equipment.
EXCAVATOR
Versatile attachments--------------------------------------------------------P9
Excellent efficiency
and fuel consumption
Engine
According to the load cycle charaterics of Liugong excavators,
QSB7 engine tailored the best fuel consumption area. Machine
fuel consumption can be reduced by more than 15%. It bsed
on proven B series, the dynamic response is fast. High altitude
adaptability, the power can be adjusted according to altitude.
6 Working Modes
6 Working modes: Power, Economy, Fine, Lifting, Breaker,
Attachment.
The Liugong E series features 6 selectable working modes that
optimize performance and fuel consumption to your specific
conditions.
IPC System
Advanced IPC (Intelligent Power Control) system,make full use of engine oil consumption characteristics, make
the engine-hydraulic pump to the best matching, achieve high efficiency, low and economical fuel consumption
homework.
Platform
High cross section of h beam structure is used in the main
platform, high strength, good rigidity, high reliability.
High beam design platform, the height of 228 mm, D series
compared to similar models increased by 11.4%, the strength is
greatly increased.
Welding platform with collision protection structure, improve the
service life of the platform.
Undercarriage
The undercarriage of 920E&922E&925E is built with the mature
technology of X type high strength box type walking frames.
Long track beam, crawler system more stable and reliable. All
of these contributes significantly to its outstanding stability and
durability.
User-friendly working environment
ROPS Cab
Which meets the ISO 12117-2 safety standard for increased peace
of mind in the unlikely event of machine roll over.
broad field of vision
Compare with D series, height of vision increase15%, the area of right side
glass increased by 10%.
Professional Advice
According to your job requirements, We can give you
advices to help you make the right machine choices.
Parts support
All of genuine LiuGong spare parts are priced,
non-original parts cant give you any warranty, if you
used non-original parts in your machine, which may
breakdown at any time due to incompatible parts.
Therefore using genuine LiuGong spares parts is the
better value for you and your machine.
So we utilize a worldwide parts network to maximize
your machines uptime and help you to save money.
versatile Attachments
Standard equipment
ENGINE SYSTEM sealed cab with all-around visibility, Exterior lights integrated into
Cummins engine, turbocharged, 6 large roof window with slide sun storage box
Cylinder 4 stroke water cooled, Diesel shade, front window wiper, removable
Engine lower window UNDERCARRIAG
Auto-idle speed control Air conditioner, heater, defroster 600 mm triple grouser track-shoes
Air filter with pre-cleaner AM/FM Radio with MP3 audio jack 2 track frame under-guards (each-
Engine oil filter Color LCD monitor with alarms, side)
Pre-filter with water separator filter/fluid change, fuel rate, water Towing eye on base frame
Radiator, oil cooler and intercooler temperature, work mode, fault code,
Engine overheat prevention system working hour, etc
FRONT ATTACHMENTS
Glass-breaking hammer
920E
HYDRAULIC SYSTEM Ashtray, cigarette lighter
5,710 mm boom and 2,915 mm arm
Power boost Cup holder
0.9 m3 (SAE, heaped) bucket
Boom and arm regeneration circuits Floor mat
Storage box 922E
Pilot oil filter
Front glass lower guard 5,710 mm boom and 2,915 mm arm
Load holding valve
1.0 m3 (SAE, heaped) bucket
Pilot control shut-off lever
925E standard
Swing with anti-reverse function UPPERSTRUCTURE
6,000 mm boom and 2,980 mm arm
Rear view mirror (right & left side)
1.2 m3 (SAE, heaped) bucket
OPERATOR STATION 2 batteries
One key for door locks, cap locks 925E narrow
IPC (Intelligent Power Control) System
Fuel gauge 6,000 mm boom and 2,980 mm arm
6-working mode selection
Hydraulic oil level gauge 1.1 m3 (SAE, heaped) bucket
system: Power Mode , Economy
Mode, Fine Mode, Lifting Mode, Storage box
Breaker Mode, Attachment Mode Swing parking brake
Highly pressurized and tightly Boom lights
Optional equipment
ENGINE SYSTEM Rotating beacon UNDERCARRIAGE
Electrical fuel refilling pump Rear view camera 700, 800, 900 mm track-shoes
Automatic engine warm-up system Suspension seat with height
adjustable arm rests and retractable FRONT ATTACHMENTS
HYDRAULIC SYSTEM seat belt Hydraulic breaker
Security valves (2 on boom and 1 Travel alarm Hydraulic quick coupler
on arm) Chair heating Ripper shank
Control pattern change valve Seat belt alarm Grapple
Hammer line 920E&922E bucket
Hydraulic quick coupler line 2 way UPPERSTRUCTURE 0.73/0.87/0.88/1.0/1.1 m
aux. line Crash-proof beam 925E bucket 1.0/1.1/1.2/1.3 m
Attachment rotating line Roll-Over Protective Structures
PTO pump (ROPS)
Falling-Object Protective Structures
OPERATOR STATION (FOPS)
Power outlet 24 V to 12 V converter Operator Protective Guards (OPG)
4 outside LED cab top lights
920E&922E
SPECIFICATIONS >>>
SPECIFICATIONS
ENGINE 1 HYDRAULIC SYSTEM
Emission Regulation Tier 2 / Stage II Two variable displacement
Main Pump
Model Cummins QSB7 piston pumps
6-cylinder, 4-stroke, in line, water-cooled, Main Pumps Total Flow 2224 L/min
Type
turbocharged, diesel engine. Relief Pressure, main 34.3 MPa
Gross Power 120 kW (160.9 hp) @ 2,100 rpm Relief Pressure, boost 37.3 MPa
Net Power 117 kW (156.9 hp) @ 2,100 rpm Travel pressure 34.3 MPa
Displacement 6.7 L
UNDERCARRIAGE 920E 922E
ENGINE 2 (only For special area) Center Frame X-Frame
Model Cummins B5.9 Number of Carrier Rollers 2 each side 2 each side
Number of Track Rollers 7 each side 8 each side
6-cylinder, 4-stroke, in line,water-cooled,
Type Number of Idler Rollers 2 each side 2 each side
turbocharged, diesel engine.
Number of Shoes 46 each side 49 each side
Gross Power 112 kW (150.2 hp) @ 1,950 rpm
Width of Track Shoes 600 mm 600 mm
Net Power 102 kW (136.8 hp) @ 1,950 rpm
Maximum Torque 614 N m @ 1,500 rpm
ELECTRIC SYSTEM
Bore x Stroke 102 x 120 mm
System Voltage 24 V
Displacement 5.88 L
Batteries 2 x 12 V
SPECIFICATIONS
6-cylinder, 4-stroke, in line, water-cooled, Main Pumps Total Flow 2240 L/min
Type
turbocharged, diesel engine. Relief Pressure, main 34.3 MPa
Gross Power 134 kW (179.7 hp) @ 2,100 rpm Relief Pressure, boost 37.3 MPa
Net Power 130 kW (174.3 hp) @ 2,100 rpm Travel pressure 34.3 MPa
Maximum Torque 800 N m @ 1,300 rpm Swing pressure 25.5 MPa
Bore x Stroke 107 x 124 mm Pilot Pump Flow 19 L/min
Displacement 6.7 L
UNDERCARRIAGE Standard narrow
ENGINE 2 (only For special area) Center Frame X-Frame X-Frame
Emission Regulation Tier 2 / Stage II Track Adjustment Hydraulic Hydraulic
Model Cummins B5.9 Number of Carrier Rollers 2 each side 2 each side
6-cylinder, 4-stroke, in line,water-cooled, Number of Track Rollers 9 each side 9 each side
Type
turbocharged, diesel engine. Number of Idler Rollers 2 each side 2 each side
Gross Power 133 kW (178.4 hp) @ 2,000 rpm Number of Shoes 51 each side 49 each side
Net Power 125 kW (167.6 hp) @ 2,000 rpm Width of Track Shoes 600 mm 600 mm
DIMENSIONS
Unit: mm
920E 922E 925E
Standard Narrow
Note:
1. Indicates the load is limited by hydraulic capacity rather than
tipping capacity.
2. The above rated loads are in compliance with ISO 10567 hydraulic
excavator lift capacity rating standard. They do not exceed 87% of
hydraulic lifting capacity or 75% tipping load. Rating over-side Rating over-front
3. Ratings at bucket lift hook.
920E
Bucket: SAE 0.9 m3, 780 kg, Boom: 5,710 mm, Arm: 2,915 mm, Shoes: 600 mm, Counterweight: 4,300 kg,
Lift Point
Height
3m 4m 5m 6m 7m 8m
4m kg 5,420 5,420 4,650 4,650 4,170 4,170 3,910 3,630 3,760 2,850
3m kg 10,150 10,150 6,960 6,960 5,530 5,530 4,730 4,500 4,250 3,500 3,960 2,780
2m kg 11,230 11,230 8,470 7,900 6,420 5,670 5,300 4,300 4,610 3,390 4,190 2,720
1m kg 10,150 10,150 9,560 7,530 7,190 5,420 5,820 4,150 4,960 3,270 4,110 2,650
0m kg 12,110 11,750 10,190 7,340 7,730 5,260 6,210 4,030 5,000 3,200 4,070 2,590
-1 m kg 14,280 11,760 10,420 7,260 8,020 5,170 6,260 3,960 4,940 3,150
-2 m kg 13,810 11,840 10,310 7,280 8,050 5,150 6,230 3,930 4,920 3,140
922E
Bucket: SAE1.0 m3, 780 kg, Boom: 5,710 mm, Arm: 2,915 mm, Shoes: 600 mm, Counterweight: 4,300 kg
3.0 m kg 10,500 10,500 6,690 5,510 5,280 3,370 4,180 2,210 3,300 1,730 8,500
1.5 m kg 15,260 9,340 8,740 4,940 5,910 3,100 4,040 2,080 3,230 1,610 8,600
0m kg 16,830 8,890 9,290 4,590 5,680 2,900 3,920 1,970 3,290 1,630 8,400
-1.5 m kg 16,760 8,880 9,130 4,450 5,560 2,800 3,870 1,930 3,610 1,790 7,900
-3.0 m kg 15,690 9,050 9,170 4,490 5,570 2,810 4,370 2,200 7,100
925E Standard
Bucket: SAE 1.2 m , 1100 kg Boom: 6,000 mm Arm: 2,980 mm Shoes: 600 mm Counterweight: 6,100 kg
Lift Point
Height
3m 4m 5m 6m 7m 8m
7m kg 3,628 3,628
6m kg 3,687 3,687
3m kg 12,203 12,203 8,161 8,161 6,318 6,318 5,338 5,338 4,716 4,447 4,322 3,513
2m kg 15,559 15,559 9,910 9,910 7,419 7,272 6,028 5,475 5,175 4,267 4,623 3,398
1m kg 16,839 15,637 11,228 9,722 8,321 6,919 6,651 5,239 5,601 4,109 4,910 3,295
0 kg 17,021 15,512 11,935 9,159 8,956 6,689 7,136 5,067 5,955 3,988 5,115 3,216
-1 m kg 16,793 15,578 12,180 9,361 9,301 6,569 7,412 4,936 6,183 3,912 5,281 3,170
-2 m kg 16,248 15,700 12,060 9,379 9,361 6,539 7,537 4,927 6,215 3,887
-3 m kg 15,352 15,352 11,598 9,178 9,121 6,587 7,378 4,957 6,068 3,922