Documente Academic
Documente Profesional
Documente Cultură
BATTERY Page 1
Note : Please read User Guide and Installation Manual before complete this Form.
Customer Name : Order No. : Date of Orders :
Date of Installation :
BATTERY INFORMATIONS :
General Information :
BANK. NO.
BATT. NO. 1 2 3 4 5 6 7 8 9 10
Voltage (V)
IR ()
BANK. NO.
BATT. NO. 11 12 13 14 15 16 17 18 19 20
Voltage (V)
IR ()
BANK. NO.
BATT. NO. 21 22 23 24 25 26 27 28 29 30
Voltage (V)
IR ()
BANK. NO.
BATT. NO. 31 32 33 34 35 36 37 38 39 40
Voltage (V)
IR ()
BECAREFUL WITH THE POSITIVE (+) BATTERY TERMINAL WHEN USING ANY METAL TOOLS TO AVOID
UNNECESSARY SPARKING
BANK. NO.
BATT. NO. 41 42 43 44 45 46 47 48 49 50
Voltage (V)
IR ()
BANK. NO.
BATT. NO. 1 2 3 4 5 6 7 8 9 10
Voltage (V)
IR ()
BANK. NO.
BATT. NO. 11 12 13 14 15 16 17 18 19 20
Voltage (V)
IR ()
BANK. NO.
BATT. NO. 21 22 23 24 25 26 27 28 29 30
Voltage (V)
IR ()
BANK. NO.
BATT. NO. 31 32 33 34 35 36 37 38 39 40
Voltage (V)
IR ()
BANK. NO.
BATT. NO. 41 42 43 44 45 46 47 48 49 50
Voltage (V)
IR ()
ABBREVIATIONS
V Voltage
Ah Ampere hour
IR Internal Resistance
BATT Battery
Ohm
OEM Original Equipment Manufacturer
WARNING :
Ensure all installation and connection attached properly to avoid failure performance or
shorted electrical appliance.
IMPORTANT :
The contractor / technician shall ensure proper selection and functioning of
System operational and safety controls.
REQUIREMENTS
The technicians shall ensure :
A. Operating controls and safety controls are compatible with the system type and application, and the selected controls are consistent
with OEM recommendations and industry practices.
B. Operating controls and safety controls lead to proper sequencing of equipment functions, with all controls and safeties functioning per
OEM ore customer design specifications.
ACCEPTABLE PROCEDURES
The contractor/technicians shall use the following acceptable procedures for fulfilling the desired application criteria:
a) Confirmation of the control/safety selections made
and
b) Supporting OEM literature related to the selections made
and
c) Verification of correct unit voltage /ampere/ operational sequences of controls and safety devices/systems per system design and OEM
specifications.
ACCEPTABLE DOCUMENTAION
The contractor/technicians shall provide evidence of the following:
a) Documents showing that controls/safeties selections are in compliance with OEM specifications
and
b) Written job documentation or checklist in the installation file indicating that controls/safeties function properly