Documente Academic
Documente Profesional
Documente Cultură
Motor
4.1 ABB it is possible to start and stop 3
2x MKL 250 1800 IP55 M3BP355SMC4 460 both motors at the same time.
399A 4 60
Motor winding temperature sensors
4.1.1 evaluation device
3x Temperature class F PTC nessecary PTC HH
Gearbox
4.2
2x
Motor
4.12.1 wired to 4.9, 3
1x MKL 1.5 1800 IP 55 460 None additional
4 60 MCC necessary.
Level-switch digital signal in case of
4.12.2 low level (switch contact
1x 24 V DC wired to 4.12.10 ) in collaboration with DI <Min L
4.12.3 < Min Min LL
Temperature-switch digital signal in case of
4.12.3 high temperatur (switch
1x 24 V DC wired to 4.12.10 contact) in collaboration DI >70C H
with 4.12.2 >80C HH
Pressure-switch for pressure-load
4.12.4 not used. switch contact
1x 24 V DC instead of this is 4.12.11 NC
Filter monitoring
4.12.5
1x 24 V DC wired to 4.12.10 switch contact DI > x bar H
Heating
4.12.8 120 connection to MCC.
1x 0,75 1 phase temperature switch inside 2
60
Terminal box hydraulic sensors/ actuators
4.12.10 form hydraulic are
1x >=IP 65 Rittal wired to 4.9
or compatible (Industrial connector harting)
Pressure-switch for pressure-load (mounted at hydraulic cylinder)
4.12.11 both switches in serie, switch contact DI < 90 bar L
2x 24 V DC wired to 4.8 NC
Code Column 3:
MKL = AC squirrel-cage motor