Sunteți pe pagina 1din 1

000000 [Program Name : StepRsponse]

This program implements the PID temperature control system.


Author: Bert Wong (c) 2014
Version 1.3
Bugs Contact: Wei.Wong@curtin.edu.au

[Section Name : Fan_Sense]

Write ladder code to check the state of Fan Sense (Analogie intput 2).

If it is sensed as the Fan is OFF then flash the RED LED (analogue output 4) at a rate of 10 Hz
HINT: Use the standard contact with address P_0_1s to implement the 0.1s blinking period

S-ar putea să vă placă și