Documente Academic
Documente Profesional
Documente Cultură
Ans. Exchanging of information using any medium is called communication and Physical
movement of information and concerning about bit priority, synchronization, clock etc. is
referred as transmission.
Ans. In a network the devices at different end point located at different location are called
nodes and the physical communication medium they using is called links.
Question: What are two main types of access control lists (ACLs)?
Ans. There are Standard and Extended ACLs (Access Control lists).
Question: Where do we use cross cables and where we use standard cables?
Ans. We use Cross cable in computer to computer connection or hub to hub or switch to
switch. Standard cables are used between hubs/ switch to computer connection.
Ans. Static IP addressing means a computer configured with an IP address will use the
same IP address always. Whereas, in Dynamic IP addressing computer IP addresses are
changed periodically and it is managed by the centralized device.
Ans. - A scope is a range, or pool, of IP addresses that can be leased to DHCP clients on a
given subnet.
Question: Difference between ARP and RARP?
Ans. Address Resolution Protocol (ARP) is used for mapping IP network address to the
hardware addresses that are working on the data link layer. Whereas, RARP (Reverse ARP)
maps the IP address from the ARP table that was requested by physical machine in a LAN.
Ans. Local Area Network (LAN) is a network that existsin a small area either a building
upto few kilometers. Its response time is less as distance has to cover less. For making
WAN (Wide area network) two or more LANs worldwide are connected.
Ans. Protocols is basically a set of rules that is required to be followed by a network for
communication. It provides the standards that a network should have to follow while
communicating to another network.
Ans. File Transfer protocol (FTP) is special protocol used to exchange the files from a
computer to internet. It is most commonly used to upload a file or image, and also applied
while downloading the pdf and other files or images from internet.
Ans. POP3 is before using mail server in which all mail should be downloaded first if
signed in with different PC. Whereas IMAP eliminates this problem and there is no need to
download all the emails in IMAP. Hence identification of new mails is easy in IMAP then
POP3.
Ans. This focuses on sending and receiving the messages to increment interoperability,
flexibility, and performance of application. It reduces the development complexity which
spans multiple OS and network protocols.
Ans. All physical components of network are work at Physical layer such like Hub, Router,
Switch, Communication Cables, etc.
Ans. Multicasting gives the facility to send single message different recipients such like
email, teleconferencing. In this some standards are used and network infrastructure.
Ans. ping is just only used to check whether the system in network. By PING service we
also get some other information like packets lost information, sent packets or received.
Ans. Physical layer, Data link layer, network layer are the network support layer and
Session layer, presentation layer and application layer are the User support layers.
Ans. In networking pipelining is defined as the process in which a task starts before the
previous task ends.
These above questions will help the fresher candidates and give them a good knowledge of
networking basic questioning that can be asked in their Interviews.
Ques 9: Two interface of the router is configured with IP addresses 192.168.1.1; subnet mask
255.255.255.0 and IP address 192.168.2.1, subnet mask 255.255.255.0. Would the routing table of
the router contain any information? Provide explanations
Ans. The router would have to perform AND operation with IP address and subnet mask when the
interface has configured. This is ultimately yield a network address and after it configured to
interface, two entries will available in the routing tables which are 192.168.1.0 and 192.168.2.0
which are network address of 192.168.1.1 and 192.168.2.1 respectively.
Dear aspirants here in the above section we have provided CCNA Interview question and answers
hope that will benifiuail to you. You may also subscribe our free email services to get latest email
alerts directly to your mailbox or bookmark this page by pressing ctrl+d. you may also join us on
Facebook or google plus.