Documente Academic
Documente Profesional
Documente Cultură
marine products
Marine Chemicals
safety
maritime logistics
Optimising performance ships agency
WSS PRODUCT CATALOGUE - TABLE OF CONTENTS
General information 20
Pumps 30
Barrel Pumps 32
Chemical pump lever type 32
1:1 Oil pump with spout 33
2:1 Chemical pump SST316 34
Chemical Applicators 35
10:1 Hydra Clean Chemical Applicator 35
2:1 Chemical applicator 36
Double Diaphragm Pumps 37
Double diaphragm pump 307 polypropylene 37
Double diaphragm pump 515 polypropylene 38
Double diaphragm pump 716 Stainless Steel 39
Double diaphragm pump 1050 polyproplylene 40
Double diaphragm pump 1050 aluminium 41
Double diaphragm pump 1050 Stainless Steel 42
Double diaphragm pump 1590 polypropylene 43
Double diaphragm pump 1590 aluminium 44
Double diaphragm pump 2150 aluminium 45
Double diaphragm pump 2150 Stainless Steel 46
Double diaphragm pump 3275 aluminium 47
Double diaphragm pump accessories 48
Grease Pumps 49
Grease pump 50:1, for 50 kg drums 49
Chemical Applicators Accessories & Spares 50
HP Extendable Lance 5.5 m 50
Double Diaphragm Accessories & Spares 51
Drum suct. kit for 515/716 51
Service kit for 515/716 51
Paint Spraying 52
Airless Paint Spraying Equipment 54
Unitor Hurricane 25D 54
Unitor Hurricane 32 55
Unitor Hurricane 45 56
Unitor Hurricane 73 57
Accessories for Airless Paint Spraying Equipment 58
Polegun for paint spraying 58
Airless Paint Spraying Equipment Acc. 58
Agitator Gallon pail 59
Airless paint spraying gun 59
Consumables for Airless Paint Spraying Unit 60
HD rac tip 60
Throat seal liquid 1 L 60
Rep Kits and Spare Parts for Airless Paint Spraying Equip 61
Rep kit Hurricane 61
Air Tools 62
Air Line Equipment 64
Air hose, PVC 64
Air hose, rubber 64
Air line unit l/reg/lub 65
Flexible hose 30cm 3/8" 66
Hose clamp for 3/8" hose 66
Air Gun 67
Air gun AG-PRO 67
Deck Scalers 68
Deck planner DP-PRO 200 68
1
Deck scaler DSH-PRO 11 69
Drills 70
Drill reversible AD-PRO 1800 70
Grinders 71
Angle grinder AG-PRO 4 B version 71
Angle grinder 72
Die grinder DG-PRO 73
Impact Wrenches 74
Impact wrench 74
Needle Scalers & Chipping Hammers 75
Needle scaler JEX-2800 low vibration 75
Needle scaler NS-PRO 19 76
Needle scaler NS-PRO 19 - straight 77
Needle scaler NS-PRO 78
Chisel scaler CS-PRO 79
Chisel hammer CH-PRO 80
Quick Couplers 81
USH socket 81
USM socket 82
USF socket 83
UPH plug 84
UPM plug 85
UPF plug 86
Unitor drain valve 86
Unitor quickview pressure gauge 87
Unitor Medusa air distributor 87
Drills - Accessories, consumables & spares 88
Drill bit set metric - high speed steel 88
Deck Scalers - Accessories, consumables & spares 89
Hammer replacement kit DSH-PRO 11 89
Cutting wheel replacement kit for DP-PRO 200 89
Ear Clamps & Hose Clamps 90
Hose clamp 90
Clamp 1 ear 91
Grinders - Accessories, consumables & spares 92
Plastic pads for AG-PRO 92
Grinding stones set 10 pcs 92
Cutting discs 93
Cutting discs inox 93
Grinding discs 94
Sanding disc 95
Mop discs 96
Impact Wrenches - Accessories, consumables & spares 97
Impact socket set 97
Scalers & Chipping - Accessories, consumables & spares 98
Piston replacement kit 98
Needles for NS-PRO series 98
Scraper for CS-PRO 62 & 120 99
Chisel set for CH-PRO 99
Quick Couplers - Spares 100
Rubber packing for 20-30-40 100
Rubber packing for 400-600 100
Workshop Equipment 102
Wire Lubricator 104
Unitor wire rope lubricator UWL77 104
Unitor wire rope lubricator UWL35 105
Wire Lubricators Accessories 106
Lubricator chamber for UWL35 106
Lubricator chamber for UWL77 106
2
Seal kits for UWL35 106
Seal kits for UWL 77 107
Working Lamps 108
Lamp cordless F/7.2-12 V batteries 108
Saws & Cutters 109
Circular saw, 160 mm 109
Jig saw 110
Bench cutter 111
Drills 112
Battery drill 12 V 112
Drill, chuck size 1-10 mm 113
Drill, chuck size 3-16 mm 114
Percussion drill PD2E 22 R 115
Grinders 116
Angle grinder 5", 10000 rpm 116
Angle grinder 7", 8500 rpm 117
Angle grinder 9", 6600 rpm 118
Drills 119
Drill bit set imperial - high speed steel 119
Battery nicd 18 V/2.0A 119
Battery charger 7.2-24 V/50-60HZ 119
Cutter 120
Hydraulic nut splitter 120
Flange Spreader 121
Hydraulic ange spreader 121
Pump & Cylinders 122
Hydraulic pump cylinder set 122
Hydraulic pump low cyl. set 123
Hydraulic cylinder 124
Hydraulic cylinders 125
Hydraulic pump electric 230VAC 125
Hydraulic pump, air roper, max 700bar 126
Hydraulic cylinder, 50T 127
Hydraulic hand pump, max 700 bar 128
Accessories for Hydraulic Equipment 129
Gauge, hydraulic 129
Regulator-lter-lube 129
Tension meter, cap. 4.5 T 130
Hydraulic cutter head, cap. 20 T 130
Replacement blade 131
Hydraulic hose for high pressure 131
Hydraulic coupler 131
Fittings - Adaptor, Hexagon nipple, Coupling, Cross, Tee & Reducer 132
Gauge, hydraulic pressure 133
Valve, ow control 133
Cleaning Equipment 134
HP Cleaners 150 - 220 bar 136
High pressure cleaning 136
HP Cleaner HPC 30, 1x220 V/60 Hz 138
HP Cleaner HPC54 200 bar, 3x220-380 V/50 HZ 140
HP Cleaner HPC54 200 bar, 3x220-440 V/ 60 HZ 142
HP Cleaner HPC62 220 bar, 220-440 V/60 HZ 144
HP Cleaner HPC66 190 bar, 3x220-440 V/60 Hz 146
HP Cleaner HPC66 190 bar, 3x220-380 V/50 HZ 148
Spares/Accessories - Cold Water HP Cleaners 150 - 220 149
Deck hose low friction 25 m 149
Heavy duty hose 10 m 150
Heavy duty hose 15 m 151
Heavy Duty Hose 25 m 152
3
Non blackening hose 10 m 153
Non blackening hose 25 m 154
Chemical Injector 155
Double lance 200 cm 155
Drain cleaner complete kit with 20 m hose 156
Foam Injector 156
Foam Lance 157
Hose quick coupling set 157
HP Extendable Lance 5.5 m 158
Nozzle 06/25 for Extendable Lance 158
Stainless Steel Cleaning Trolley 159
Rotary Brush 80 cm 159
Rotary Brush 170 cm 160
Spray handle 3000 160
Tornado Short Lance 10 cm 161
Tornado Normal Lance 92 cm 161
Powerspeed Lance 162
Tornado normal lance 104 cm 162
Nozzle 05/25 degree for Extendable Lance 163
Nozzle 06/0 degree for Extandable Lance 163
Nozzle 05/0 degree for Extendable Lance 163
Universal 3000 Lance 164
Washing Brush 235 cm 164
Hot Water HP Cleaners 165
HP Cleaner HPCH53 HW, 200 bar 60 HZ 165
Spares & Accessories for Hot HP Cleaners 167
Rotary Brush 80 cm 167
Repair kit safety valve HPCH53&Solar 167
Repair kit bypass valve for HPCH53 167
HP Cleaners 300 - 500 bar 168
HP Cleaner HPCE330 310 bar, 3x440/60 Hz 168
HP Cleaner HPCE405 385 bar, 3x440 V/60 Hz 169
HP Cleaner HPCE520 500 bar, 3x440 V/60 Hz 170
HP Cleaner HPCE520 high ow 500 bar, 3x440V/60 Hz 171
Air Driven HP Cleaners 172
HPC Airclean 25 172
HPC Airclean 32 173
HPC Airclean 48 174
Spares & Accessories for HP Cleaners 300 - 500 bar 175
Powerspeed Attachment, HPCE330 175
Sandblasting Pack, HPCE330 and 405 175
Powerspeed Attachment, HPCE520 176
Sandblasting Pack, HPCE520 176
Water lter insert extreme 177
Extreme High Pressure hose - 10 m 177
Extreme High Pressure hose - 25 m 178
Spares & Accessories for Air Driven HP Cleaners 179
Single Lance HPC Airclean 179
High Pressure hose, HPC Airclean 179
Stationary Cold Water Cleaners 180
Duo booster 3X440 V 60 HZ 160 BAR 180
Delta booster-3 3X440/60 182
Delta booster-4 3X440/60 184
Delta booster-5 3X440/60 186
Delta booster-6 3X440/60 188
Uno booster 3X440 V 60 HZ 160 BAR 190
Spares & Accessories Cold Water Stationary Systems 191
Take off valve A for sationary acid proof 316 191
Take off valve A for stationary Chromium plated brass 191
4
Stationary Hot Water Cleaners 192
Solar booster with 18 KW heater, 3x440 V/60 Hz 192
Solar booster with 18 KW heater, 3x400 V/50 Hz 194
Wet & Dry Cleaning Units 195
VCWD20 wet and dry vacuum cleaner 195
VCWD70 wet and dry vacuum cleaner 196
VCWD27 wet and dry vacuum cleaner 198
VCAD200 wet and dry vacuum cleaner 199
Accessories & Spares Vacuum Cleaners 200
Suction hose 1.8 M for VCWD18 200
Straight tube VCD15 & 27 200
Water hose & suction hose fro VCCW24 200
Carpet nozzle for VCCW24 200
Deck scrubbing adapter for VCCW24 200
Suction hose 4m for VCWD 70 201
Large deck cleaning kit for VCWD 70 201
Liquid removal kit for VCWD 70 201
Curved tube 100 cm for VCWD 70 201
Mucking Pumps 202
Mucking Pump - Marine GM2 202
Mucking Pump - Accessories, consumables & spares 203
Vacuum kit for mucking pump 203
Camloc connector 102 mm table D eng for mucking pump 203
TPI connectors for mucking pump 203
Butterworth connectors for mucking pump 203
Cargo Hold Cleaning Kit 204
Cargo Hold Cleaning Kit - Handymax 204
Cargo Hold Cleaning Kit - Panamax Light 205
Cargo Hold Cleaning Kit - Panamax 206
Cargo Hold Cleaning Kit - Accessories, consumables & spares 207
Extension for chemical applicator lance 207
Cleaning Jets 208
Tornado 2 Cargo Hold Cleaning Jet 208
Tornado 3 Cargo Hold Cleaning Jet 209
Tornado 4 Cargo Hold Cleaning Jet 210
Ultrasonic 211
Unitor Ultrasonic Cleaner S-700/HM, 110 V 211
Unitor Ultrasonic Cleaner S-700/HM, 230 V 212
Unitor Ultrasonic Cleaner S-1600/HM, 230 V 214
Unitor Ultrasonic Cleaner S-2000/HM, 230 V 215
Unitor Ultrasonic Cleaner S-3300/HM, 440 V 216
Multi-Frequency Generator, MF 2000 217
Multi-Frequency Generator, MF 3000 218
Multi-Frequency Generator, MF 4000 219
Immersible Ultrasonic Transducer, MF-TS 600 220
Immersible Ultrasonic Transducer, MF-TS 1000 221
Immersible Ultrasonic Transducer, MF-TS 1500 222
Immersible Ultrasonic Transducer, MF-TS 2000 223
Gases, refrigerants and cylinders 224
Acetylene 226
Acetylene A-40 lling 226
Acetylene A-5 lling 227
Oxygen 228
Oxygen O-40 lling 228
Oxygen O-5 lling 229
Nitrogen 230
Nitrogen N-5050 lling 230
Nitrogen N-5030 lling 231
Nitrogen N-1050 lling 232
5
Nitrogen N-1030 lling 233
Cruise gas 234
Propane P-5 lling 234
Helium H-40 lling 235
Carbon dioxide lling 236
Nitrogen food Grade N-10FG lling 237
Breathing oxygen 238
Breathing oxygen MOX-2 lling 238
Breathing oxygen MOX-5 lling 239
Breathing oxygen MOX-40 lling 240
Argon 241
Argon E-50 lling 241
Argon E-10 lling 242
Unimix 20 M-10 lling 243
Unimix 20 M-50 lling 244
Nitrogen mixtures 245
Ammonia 245
O2 in Nitrogen in SG10 cylinder 246
CO2 in Nitrogen/air in SG10 cylinder 247
Ethanol 248
Disposables 249
MInimix Disposable Cylinders 249
LEL mixtures 250
LEL mixtures 250
Pentane 49% LEL in air C5H12 (0.68% vol) in SG50 cylinder 252
Regulators 253
Regulator R-510 for Spangas SG10 cylinders 253
Regulator for Scotty 58/VI disp. cylinder 253
Regulator for Minimix disposable cylinder 253
Bracket for SG10 cylinder 253
Hycool marine 254
Hycool marine 45 254
Hycool blue additive 25 L can 254
R-134a 255
Unicool R-134a 57 kg refrigerant 255
Unicool R-134a 12.5 kg refrigerant 256
R-22 257
Unicool R-22 57 kg refrigerant 257
Unicool R-22 12.5 kg refrigerant 258
R-404A 259
Unicool R-404A 45 kg refrigerant 259
Unicool R-404A 9.5 kg refrigerant 260
R-407C 261
Unicool R-407C 52 kg refrigerant 261
Unicool R-407C 11 kg refrigerant 262
R-410A 263
R-410a 45 kg refrigerant 263
R-410A 9.5 kg refrigerant 264
R-417A 265
Unicool R-417A 51 kg refrigerant 265
Unicool R-417A 11 kg refrigerant 266
R-422D 267
Unicool R-422D 52 kg refrigerant 267
R-427A 268
Unicool R-427A 53 kg refrigerant 268
R-507 269
Unicool R-507 45 kg refrigerant 269
Unicool R-507 9.5 kg refrigerant 270
Refrigerant recovery cylinders 271
6
Recovery cylinder 21,6 l + documents 271
Recovery cylinder 56 l + documents 272
Complete installations for Ox/Ac 273
Central installation for Acetylene + Oxygen 273
Cylinder racks 274
Rack for cylinders 274
Gas cylinder cabinets 275
Gas Cylinder cabinet 275
High pressure components 276
High pressure components 276
Low pressure components 277
Low pressure components spare parts 277
Leak detection spray 300 ml 278
Outlet station 279
Outlet station 700 complete with S55 ashback regulators and steel cabinet 279
Outlet station 700 with steel cabinet but without ashback arrestors 279
Steel cabinet for outlet station 700 280
Fibre glass cabinet for outlet station 700 280
Adaptor set for outlet station 700 281
Twin valve unit for outlet station 700 281
Regulator R-530 for Acetylene 282
Regulator R-530 for Oxygen 282
Stretch relief bracket for twinhose 283
Shielding gas installations 284
Shielding gas installation for cylinders 284
Refrigeration equipment 286
Lubricants 288
Refrigerant oil, POE, low temperature 288
Refrigerant oil. Poe, high temp 289
Refrigerant oil, mineral, high temp 290
Package Equipment 291
Unitor drinking water cooler, 230 V 291
Unitor drinking water cooler, 115 V 292
System Equipment and Accessories 293
Refrigerant charging station UCS-200 293
Liquid line drier core 48 DN 294
Charging hose HP 1350 mm 294
Cylinder stand 295
Top valve adaptor set for Unicool refrigerant cylinders UVA-001 295
Collection of ttings, 1/4 - 3/8" 296
Collection of ttings, 3/8 - 5/8" 297
Fixed leak detector kit, 4 channel, MRD4S-2L 298
Fixed leak detector kit, 6 channel, MRD6S-2L 300
Fixed Leak detector Kit 4 Chanels IP66 302
Fixed leak detector, MSPH sensor 303
Fixed leak detector, IP66 sensor 304
Fixed leak detector, safety V/V vent pipe sensor 305
Fixed leak detector, AHU/DUCT sensor 306
Fixed leak detector, 4 core cable 306
Tools 307
Digital dual thermometer 307
Marine thermometer kit UTK-100 308
Surface probe thermometer 310
Air probe thermometer 310
Needle probe thermometer 311
Wire thermocouple probe 311
Inrafred thermometer 312
Vacuum pump, standard, 115/230 V 313
Vacuum pump, Heavy duty, 115/230 V 314
7
Vacuum pump oil 0.95 l 315
Vacuum gauge 0-1000 MBAR 315
Digital vacuum gauge UVG-64 316
Electronic vacuum gauge UVG-150 317
Charging/Vacuum Hose UCH-72Y 318
Vacuum valve assembly 319
Hand oil pump 5 L & 25 L drums 320
Acid test kit mineral + AB oils 320
Acid test kit poe oils 320
Refrigerant leak detection kit, UV tracer kit 220/240 V 321
Refrigerant leak detection kit, UV tracer kit 12 V 322
Refrigerant leak detection, UV, tracer uid for mineral oil 323
Refrigerant leak detection, UV, Universal tracer uid for all oil types 324
Refrigerant leak detection, UV, glo-klenz cleaner 324
Spare bulb 110/220 V 100 W 325
Spare bulb 12V 100W 325
Hand held refrigerant leak detector UNIRX-1A 326
Maintenance kit leak detector-XP2 327
Refrigeration handy tools case 328
Tube cutter UPT-274-FC 329
Tube bender, triple head 329
Flare tool 330
Flaring set 330
Flare/Swage set 3/16" - 3/4" 331
Inner-outer reamer 331
Ratchet Wrench Small 1/4" - 3/8" - 3 & 5/16" 332
Ratchet Wrench Big 1/2" - 1/4" - 5 & 9/16" 332
Magnet & Volt Sticks Pack 333
Charging hose set UCH-72 3 x 1.8 m 333
Deluxe service manifold set 2-WAY, R-410A 334
Deluxe service manifold set 4-WAY, various refrigerants 335
Refrigerant recovery package, 115 V 336
Refrigerant recovery package, 230 V 338
Refrigerant recovery unit, URU-5000B, 115 V, 50/60 HZ 340
Refrigerant recovery unit, URU-5000A, 230 V, 50/60 Hz 342
Recovery unit URU-5000A/B, compressor repair kit 344
Recovery unit URU-5000A/B, piston seal repair kit 344
Recovery unit URU-5000A/B, valve repair kit 344
Recovery unit URU-5000A/B, shaft seal repair kit 344
Recovery unit URU-5000A/B, connection kit 345
Recovery unit URU-5000A/B, inlet lter drier 3PCS, 1/4" Flare 345
Digital weighing platform ADS-100 346
Onboard storage box for refrigerant recovery package 347
Charging Hose - 1.8 m, 1/4" Flare 9881268 Cl-72-Y Yellow 347
Filter driers UFD 2 PCS 348
Activated alumina beads 349
Silica gel desiccant 349
Welding 350
Gas Cylinder Regulators and Flashback Arrestors 352
Regulators 510 352
Flashback arrestor W-66S 353
Flashback arrestor S55 354
Gas Hoses and Couplings 355
Gas hoses 355
Reel, self retracting with 20m 6.3 mm twin hose Ac/Ox 356
Reel with crank for welding cable and gas hoses 356
Hose joint for gas hoses 357
hose clamp 357
Pincher tool for hose ear clamps 357
8
Quick couplings 358
Gas Welders Accessories 359
Safety welding goggles, lift front for gas welding 359
Glasses for gas welding goggles 359
Safety spectacles clear for eye protection 360
Safety spectacles shade 4 for brazing and gas welding 360
Safety grinding goggles with anti mist acetate lens 361
Heat resistant mitten for gas cylinders 362
Gas/TIG softskin welding gloves, 6 pairs 362
Gas ignitor triplex 2 pcs for gas welding 363
Gas ignitor triplex spare int set. 10 pcs 363
Welders chalk, at 5x13x127. 144 pcs/pack 364
Temperature indicator kit 364
Galvanizing spray. 6 pcs 364
Welding, Brazing & Cutting Torch 365
UCT-500 Combination torch master kit for gas welding/cutting 365
UCT-500 combination torch compact kit for gas welding/cutting 366
Shank with non-return valves for Ac/Ox combination torch 367
Nonreturn valve 367
Welding attachments 368
Multiame heating attachment 368
Cutting attachment with head angle for UCT-500 369
Cutting nozzle 370
Gouging nozzle 370
Guide standard 371
Spare part kit complete 371
Spanner for torch 372
Cleaning needles set for torch 372
Transportable Gas Welding Equipment 373
Trolley A40/O40 gas weld. 373
Trolley 1 SU-10 374
Trolley A-5/O-5 gasweld for portable equipment 375
Back portable rack f/A5- +05-cyl. 376
Portable rack for A5+05 cylinder 377
Standard gas accessories for mobile equipment 378
Portable welding table 379
Gas Welding Cabinet 380
Gaswelding cabinet empty 380
Gaswelding cabinet complete with torch, rods & uxes 381
Gas Welding and Brazing Consumables 382
Gas welding and brazing consumables 382
Arc welding/cutting machines 384
UWI-150 Autoline Welding Inverter 384
UWW-161 MP Multi Process Welding Inverter 386
UWI-203 Stick / TIG 388
UWR-303 welding rectier 390
Accessories for UWR-303 392
UWI-400 welding inverter 393
Accessories for UWI-400 395
UWF-SC 12 RC wire feeder 396
UWR-852 Welding rectier 398
UPC-1041 Plasma Cutter 400
Cables and Connectors 402
Welding cable 402
Cable connector 403
Cable shoe 403
Adapter Plug Dix Female 70 and Male 25; 2 pcs per pack 404
Parallel connecting three way connector DIX70 male-female-female 2 pcs 404
Conversion assem. 2 pcs 404
9
Remote control for UWR-303 with belt clip 405
Remote control cable 10m for UWR-303 405
Extension cable 25m 4 PIN for UWR-303 remote controls 406
Remote control for UWI-400 for el holder/tig torch 406
Extension cable a 25 m for UWI-400 remote controls 407
Parallel connection cable for UWI-400 remote controls 407
Stick electrode arc accessories 408
Electrode holder assembly 408
Electrode holders 408
Air carbon arc torch 600A with safety and air connection 409
Air carbon arc torch heavyduty 1600A 409
Return clamp assembly 410
Return clamps 410
TIG Welding Accessories 411
TIG welding accessories 411
TIG torch-T-150 w dix 25 connector 412
Remote control for UWI-150 autoline 413
TIG Torch T-161 with 4 m cable, euro connector and torch mounted trigger 414
TIG torch T-200 w dix 70 connector 415
Accessories kit TIG torch 417
Tungsten electrode 1.6mm alloyed for DC TIG welding 418
Tungsten electrode 2.4mm alloyed for DC TIG welding 418
Wire Welding Accessories 419
Wire torch T-400 with 3m cable for S-12RC/S-22 P12/UWF-MP 419
Driveroll and wire guide kits for wire feeder sc 12 rc 420
Spool compression spring 421
Spool adapter 421
Wire torch M-161 with 3m cable and euroconnector for UWW-161 MP 422
Drive roll 422
Shielding gas accessories 423
Argon regulator 423
CO2 regulator 424
Flowcontrol needle valve for gas ow adjustment 425
Flowcontrol meter, argon for use at torch nozzle 425
Plasma cutting accessories 426
Consumables kit complete for UPC-1040 426
Accessories for UPC-1040/1041 426
Current distribution system 427
Current distribution system 427
Inlet station welding current 400A 428
Outlet station welding current 400A 429
Inlet station welding current 800A 430
Outlet station welding current 800A 430
Remote connection cable for UWI-400 6m, 14 pin female/10 pin male 431
Remote connection cable for UWR-303 6m, 4 pin male/10 pin male 431
Remote control adapter for UWI-400 14 pin female/10 pin male 432
Remote control adapter for UWR-303 4 pin female/10 pin male 432
Welder's Protection 433
Autovision Plus Fresh Air Weldshield with respiratory unit 433
Autovision plus welding shield 434
Flipvision welding face shield with headband and shade 11 glass 435
Safety helmet with face shield and shade 11 glass 436
Face shield with handle and lter shade 11 glass 437
Arc welding glasses 438
Autovision outside cover lens 10pcs 438
Autovision inside cover lens 10pcs 438
Protective clothing 439
Welding curtain with hooks 440
Welding spatter blanket 1 x 10mm on roll 440
10
Fume Clean 230 complete 441
Welder's Tools 442
Wire Brush 442
Chipping hammer 442
Welding gauge type J for throat thickness and reinforcement 443
Multi purpose plier for wire torch 443
Welders chalk, at 5x13x127. 144 pcs/pack 444
Temperature indicator kit 444
Galvanizing spray. 6 pcs 444
Anti spatter spray, 400 ml in a box, 6 pcs 445
Magnaux crack detection kit 446
Cleaner SKC-S. 10 pcs 447
Penetrant SKL-SP1. 10 pcs 447
Developer SKD-S2. 10 pcs 447
Information about coated stick electrodes 448
Information about coated stick electrodes 448
Coated Stick Electrodes 450
Unitor range of maintenance electrodes 450
GPO-302N 453
GPR-300H 454
Special-303N 455
LH-314N 456
LHH-314H 457
LHV-316N 458
LHT-318N 459
LHL-319N 460
LHR-320N 461
18/8-321N 462
23/14-322N 463
Duplex-325N 464
Pickling gel 2 litre for stainless steel 465
Tensile-328N 466
Impact-329S 467
Wearmax-327 468
Abratech-330 469
Nickel-333N 470
NiFe-334N 471
Tinbro-341 3.2x350mm 42 electrodes 1.4kg 472
Albronze-344 3.2x350mm 46 electrodes 1.3kg 472
Alumin-351N 3.2x350mm 82 electrodes 1.1kg 473
CH2-382 3.2x350mm 36 electrodes 1.4kg 474
ACA-384 475
Electrode Storing Cabinets 476
Minidryer- 350 capacity 8kg electrodes 476
Heating cabinet - 85 capacity 350kg electrodes 477
Electrode cabinet empty for 27 pcs electrode packages 478
Electrode cabinet complete with 27 pcks of electrodes 479
Arc Welding Wires 481
Wire for wire welding 481
TIG Welding Rods and Fluxes 482
Rods and uxes for TIG Welding 482
Cold Repair Polymer Compounds 483
Cold repair polymer compounds 483
Polymer kit 484
Leak stop pipe repair tape 485
Metalgrade ready stick 3 pairs of sticks 0.72kg 486
Metalgrade express base and activator 0.25L 486
Metal grade rebuild base and activator 0.5L 487
Metal grade hi - temp heat resistant compound 488
11
Aquagrade rebuild base and activator 0.5L 489
Ceramigrade rebuild base and activator 0.5L 490
Ceramigrade liner base and activator 0.5L 490
Ceramigrade abrashield 5.4kg engineering repair compound 491
Rubbergrade 6 rebuild 3 x 0.143L base/activator 492
Rubbergrade 6 remould 3 x 0.143L base/activator 493
Marine Chemicals 494
Cleaning Chemicals 494
Cargo Hold Cleaning 496
Aquatuff High Foam 496
Metal Brite HD 497
Slip-Coat 498
Slip-Coat WR 499
Cleaning and Maintenance 500
Enviroclean 500
Coldwash HD 501
Cleanbreak 502
Seaclean 503
Seacare O.S.D 504
Seacare Ecosperse 52 505
ACC Plus 506
Air Cooler Cleaner 507
Carbonclean LT 508
Carbon Remover 508
Descalex 509
Descaling Liquid 510
Metal Brite 511
Disclean 511
Deck Clean NP 512
Teak Renewer 512
Aquatuff 513
Aquabreak PX 514
Foam-Agent 515
Multi clean 515
Reefer Cleaner 516
Fore & Aft 517
H.P. Wash 518
Uni-Wash 519
Ultra Sonic Cleaner USC 520
Natural Hand Cleaner 521
Carpet Cleaner 522
UltraCIP 523
Commissioning Cleaner 524
Bilge Water Flocculant 525
Defoamer Concentrate 526
Penetron Plus 527
Electrosolv-E 528
Mud & Silt Remover 528
Tank Cleaning 529
Seaclean plus 529
Alkleen Liquid 530
Alkleen Safety Liquid 531
Tankleen Advance 532
Tankleen Bright 532
Unipol 533
Zinc Coat Conditioner 534
Gamazyme Cleaners 535
Gamazyme 700FN 535
Gamazyme MSC 536
12
Gamazyme BTC 537
Gamazyme TDS 538
Gamazyme Digestor 539
Gamazyme DPC 540
Gamazyme BOE 541
Gamazyme FC 542
Gamazyme BUB 543
Water Treatment 544
Boiler Water Treatment 546
Oxygen Scavenger Plus 546
Oxygen Control 547
Oxygen scavenger 9-035 548
Oxygen scavenger 9-002 548
Oxytreat 549
Cat Sulphite L (CSL) 550
Condensate Control 551
Condensate treatment 9-150 552
Hardness treatment 7208 552
Hardness Control 553
Alkalinity Control 554
BWT liquid plus 555
Boiler Coagulant 556
Autotreat 25 557
Multiplus 558
Liquitreat 559
Combitreat 560
Cooling Water Treatment 561
Antifoulant 9-321 561
Rocor NB Liquid 562
Engine water treatment 9-108 563
Naleet 2000 564
Dieselguard NB 565
Engine Water Treatment 9-111AL 566
Cooltreat AL 567
Mar-71 568
Bioguard 569
Water Production Treatment 570
Vaptreat 25 L 570
Maxi-vap plus 570
Multivap 571
Evaporator defoamer 572
Potable water stabiliser liquid 573
Potable Water Stabiliser 574
RO Scale control 575
RO Bisulphite 575
RO Alkaline cleaner 576
RO Mild acid cleaner 577
RO Surfactant cleaner 577
Ballast tank inhibitor 9-933 578
Aquabrome tablets 578
Pool Clarier 579
Pool Surface Cleaner 580
Pool and Spa Hardness 581
Spa Defoamer 582
pH Increaser 583
Fuel Oil Treatment 584
Distillate Fuel Treatment 586
Biocontrol MAR 71 586
Diesel fuel lubricity improver 587
13
Diesel fuel stabiliser 588
Heavy Fuel Oil Treatment 589
Fuelcare 589
Gamabreak 590
Dual Purpose Plus 591
Burnaid 592
Dieselite 593
Valvecare 594
Soot Remover 595
Soot Remover Liquid 596
Test Kits & Equipment 597
Naleet Water Dosing Equipment 600
Naltrak 1000 CWT dosing system 600
Naltrak 1750 BWT dosing system 601
Naltrak 2000 BWT dosing system 602
Dosing unit for Evaporator Treatment 603
Dosing unit for BWT 604
Sea Water Dosing Unit 605
Naleet Water Test KIts 606
Spectrapak 309 606
Spectrapak 310 607
Spectrapak 311 608
Spectrapak 312 609
Spectrapak 313 610
Spectrapak 315 611
Motor ship test kit 612
Boiler plus test kit MO380 613
Sulphite drop test 614
Nitrite full kit MO248A 615
pH test strips 2 pack MO319 616
Total hardness titration pack M204 616
Alkalinity titration pack M250 617
Chloride titration pack M251 617
Titration apparatus pack no 1 MO217 618
Titration apparatus pack no 2 MO218 618
Filter pack, 1 cardboard box MO213 619
Ecoscan pH6 meter & electrode MO348 619
Ecoscan conductivity meter MO347 620
Maxidirect photometer 621
Chlorine checkit block 0.2-8 ppm 622
Oxygen full kit 0-40 ppm O2 M341 622
Legionella test kit 623
Potable Water Test Kit 624
Lovibond 2000 comparator 625
Test kit cooltreat AL with CL test 626
Unitor Cleaning and Dosing Equipment 627
Fuel Oil Treatment Dosing Unit 627
Automatic Dosing for Soot Remover Liquid 628
Manual Dosing Unit for Soot Remover Liquid 629
Portable Soot Remover Injector 630
Fixed Soot Remover Injector 631
Chemical Cleaning Unit 632
Jet spray unit 10 l ste 633
Jet spray unit 10 l stainless steel 633
Rechargeable sprayer 634
Spray gun 1 l 635
Syphon squeezer 635
Unitor Fuel Oil Test Kits 636
Easy Ship Combined Oil Test Kit 636
14
Easy Ship Water in Oil Test Kit 637
TBN Test Kit 638
Compatibility Test Kit 639
Heated Viscosity Meter 640
Density Meter 641
Fuel Oil Test Cabinet 642
Insolubles Test 643
Salt Water Determination Test 643
Bunker Sampler 644
Plastic Storage Cabinet 645
Fire Protection 646
Cabinets for Extinguishers and Fire Blankets 652
Cabinet for re extinguisher 6 to 9 kg 652
Cabinet for Fire Extinguisher 5 to 9 kg 653
Fire Blanket 120 X 180 cm wall-mounted 654
Portable Extinguishers Cartridge Operated 655
Powder Extinguisher 12 kg Abc without Bracket - P12p M18 655
Powder Extinguisher 9 kg Abc without Bracket - P9p M18 656
Powder Ext. 6 kg Abc W/O Brkt - P6p M18 657
Water Extinguisher 9 L without Bracket E9 Model E9 658
Foam Extinguisher 9 l without Bracket 659
Metal Fire Extinguisher 9 kg without Bracket - P9fm.M M18 660
Foam Extinguisher 9 l without Bracket Ev Low Tmp.Hi Type E9a1ev Lt Hp 662
Fat Fire Extinguisher 6 L without Bracket Model E6a15 Evf 663
Stored Pressure Extinguishers 664
Powder Extinguisher 2 kg Abc W/Spc with Bracket Model Pp2p 664
Dp Extinguisher 3 kg Abc Pp3p Sp without Bracket 665
Co2 Extinguisher 5 kg without Bracket Model U5c 666
Dp Extinguisher 6 kg Abc Pp6p Sp without Bracket 667
Dp Extinguisher 9 kg Abc Pp9p Sp without Bracket 668
Dp Extinguisher 12 kg Abc Pp12p Sp without Bracket 669
Wheeled Extinguishers 670
Powder Extinguisher 50 kg Abc P50p Wheeled 670
Extinguisher Co2 20 kg Wheeled 671
Foam Extinguisher 45 l Wheeled Model E45a2 672
Foam Extinguisher 135 l Wheeled Model E135a2 673
CO2 Extinguisher 45 kg Wheeled 674
Powder Extinguisher 25 kg Abc Wheeled P25p Me 675
Co2 Extinguisher 9 kg Wheeled 676
Extinguisher Powder 25 kg Wheeled 677
Spare parts for re extinguishers 678
CO2 Cartridge 60 g for 9 L Water/ Foam E9/E9A1/E9A1EV extinguisher 678
Co2 Cartridge 450 g for foam 45 L Extinguisher 679
CO2 Cartridge 2 kg for 135 l foam Extinguisher 680
CO2 Cartridge 120 g for 6 kg Powder Extinguisher 681
Spare Cartridge 160 g for 6 kg Powder (BC rated) Extinguisher 682
CO2 Cartridge 180 g for 12 kg Powder Extinguisher 683
CO2 cartridge 450 g for 25 kg Powder (ABC or BC rated) Extinguisher 684
CO2 Cartridge 900 g for 50 kg Powder (ABC or BC rated) Extinguisher 685
AFFF Foam Charge 90 ml for 9 L Foam Extinguisher 686
AFFF Foam Charge F/E45a2 2300011-0.9 l 687
AFFF Foam Charge 3 x 0.9 L for 135 L Foam Extinguisher 688
Powder Rell for 6 kg ABC Extinguisher 689
Powder Rell for 9 kg ABC Extinguisher 690
Powder rell for 12 kg ABC Extinguisher 691
Powder Rell for 25 kg ABC Extinguisher 692
Marine bracket with strap for 5 kg CO2 Extinguisher 693
Universal Bracket For P6/P6p/P9p/ P12/P12p/E9/E9a1 693
Marine Bracket With Strap For Pp6p 694
15
Marine Bracket With Strap For PP9P 694
Extinguisher Bracket with Strap for 12 kg Stored pressure 695
Fire Couplings 696
Norwegian coupling 696
Storz Coupling 697
Instantaneous coupling 698
Fire Hoses 699
Martex Fire hose 699
Guardman re hose 700
Mertex re hose 701
Clamping device for binding machine 702
Binding Machine Portable 702
Fire Hydrants 703
Hydrant Valve 703
International Ship to Shore connection 704
Fire Nozzles 705
Fire nozzles 705
Foam Concentrates 706
Foam concentrates 706
Smoke and Heat Detector Test Equipment 708
Smoke and Heat Detector testing 708
Personal Safety 710
Breathing Air Compressors 712
Breathing Air Compressors 712
Junior II-E Air Compressor 713
Oceanus E Air Compressor 714
Breathing Air Compressors B Timer 715
Compressor Filter charge for Junior/Oceanus TRIPLEX lter 716
Bauer Compressor Filling Hose 50 m Dn6, Pn450 717
Compressor 300-200 bar change over device 718
Change over Device from 200-300 bar Compl For Bauer Compressor 718
Compressor Breathing Air Quality Test Kit 719
Filter Masks / Breathing Filters 720
Breathing Filter Masks 720
ADVANTAGE 3121 Single Filter Threaded Med. 721
Breathing Masks Filter Range 722
Compressed Air Breathing Apparatus 723
Self Contained Breathing Apparatus 723
Emergency Escape Breathing Device 724
Uniscape EEBD 724
Chemical Protection 726
Chemical Suits 726
Chemical Resistant Personal Protection Kit 727
Trellchem Super T-ET 728
Trellchem Light T 729
Trellchem VPS T-ET 730
Trellchem Splash 600 suit without boots 731
Unipack hose for Chemical suits Super/VPS/Light suit only connection 732
Unipack hose for Chemical suits Super/VPS/Light suit and rescue mask connections 732
Chemical Suit Safety Boots 733
Trellchem Chemical suit Hood for Facemask & BA set 734
Trellchem Chemical suit mini hood 734
Gloves, viton/butyl for Trellchem VPS & Super 735
Gloves PVC for Trellchem light and splash 736
Chemical Suit Repair kits 737
Molykote grease f/O-ring bayonet system 738
Head Protection 739
Head Protection 739
Head Protection Accessories 740
16
Hearing Protection 741
Hearing Protection 741
Personal Fire Protection 742
Unitor Flameguard Plus reghter suit kit 742
Unitor Flameguard Solas reghter suit 743
Unitor Firebuddy plus reghter suit kit 744
Firemans Helmet - PAB HT04 745
Led lamp for reman helmet PAB 746
Cabinet for Fire ghters outt 747
Fire axe with insulated handle 2 kV 748
Cover for Fire Axe 748
Gloves for Firebuddy Plus Fireghter suit 749
Fireghters suit insulated gloves 750
Solas Fireghter Boots 751
Fireghter Boots - MED Approved 752
Fireghter Lifeline 753
Portable Gas Detection 754
Oxy, Toxi & Gas-mate 754
Combi-Mate 755
Combi-Mate 3 757
Tank-Mate 758
Aspirator hose 10 m for use with Unitor Gas detectors 759
Aspirator hose 20 m for use with Unitor Gas detectors 759
Aspirator probe 1 m xed for gas detection 760
Aspirator Probe, Telescopic - 1 m 760
Aspirator assembly Single Gas Monitor 761
Aspirator assembly non-pumped Unitor Combi-Mate gas detector 761
Aspirator Assembly for Unitor Combi-mate 3 gas detector 762
Watertrap for use with gas detection aspirator tube 762
Gas-Test Kit, for Unitor Combi-Mate pumped unit without gas cylinder 763
Gas test kit for Combi-mate 3 763
Carry Case for Oxy, Toxi & Gas-mate Single Gas portable gas detector 764
Carry Case for Unitor Combi-Mate portable gas detector 764
Chest harness kit for Unitor Combi-Mate gas detector 765
Carry Case for Unitor Combi-mate 3 portable gas detector 765
Carry case and belt for Unitor Tank-mate gas detector 766
Harness Belt and Fall Arrestor 767
Fall Arrest devices 767
Life Saving 768
Cabinets 770
Cabinets 770
Hydrostatic Release Units 771
Hydrostatic Release Unit Hammar H20 for liferafts 2 year 771
Hydrostatic Release Unit DK2004 for liferafts 4 Year 772
Immersion Suits 773
Immersion Suits 773
Rescue suit 774
Life Jackets and Lights 775
Lifejacket Ancillaries 775
Inatable Lifejackets 776
Unitor Seaguard Lifejackets 777
Lifebuoys, bracket, lines and light 778
Lifebuoys and Ancillaries 778
Lifebuoy Lights 779
Lifeboat Air Cylinders 781
Lifeboat cylinders 781
Liferafts 782
Liferaft Rental 782
Throwoverboard Liferafts 784
17
Davit Launch Liferafts 786
Pyrotechnics 788
Pyrotechnics 788
Rescue Equipment 789
Rescue Equipment 789
Stretchers 790
Neil Robertson Stretcher 790
Paramedic Stretcher and Rescue Unit 791
IMO Embarkation station/Lifeboat signs 792
IMO Lifeboat Signs 792
IMO Escape Way guidance signs 793
Escape way and guidance signs 793
IMO Fire ghting Equipment & System signs 794
Fire Equipment signs 794
IMO First Aid & Safety Equipment signs 795
First Aid and Medical Equipment signs 795
IMO Hazard signs 796
IMO Hazard Signs 796
IMO LSA Signs 798
IMO Lifesaving Appliance Signs 798
IMO Muster/Assembly station signs 800
Muster and Assembly station signs 800
IMO Personal Protective Equipment signs 802
Personal protective equipment Signs 802
IMO Prohibition signs 803
IMO Prohibition Signs 803
IMO Security Instruction signs 804
IMO Security instruction Signs 804
IMO SOLAS tape 805
Retroreective tape 805
Medical 806
Debrillators 808
Debrillator Heartstart Frx including Pads And Softcase 808
Medical Oxygen Systems 809
Med Ox system IMO, Outside Excl mox-40 cylinder 809
Med Ox system. IMO Bedside Excl mox-40 cylinder 810
Med Ox System IMO, Norwegian type Excl mox-40 cylinder 811
Medical Oxygen Resuscitators 812
Oxygen resuscitator without cylinder 812
Medical Suction Unit 813
Environmental 814
Oil spill products 816
Oil spill Kits 816
Oil spill care and maintenance tools 817
Oil spill kit spare storage box 818
Oil spill kit spare 1000 l waste bag 818
Sorbents & Booms 819
Spill Kit Sorbent Pads 819
Sorbent Rolls 820
Sorbent particulate U94 821
Sorbent sweep U941800 822
Sorbent Pillows 823
Sorbent Booms 824
WTS Safety Systems 826
Maritime Logistics 852
Ships Agency 854
Terms and conditions 858
18
20
WILHELMSEN SHIPS SERVICE
PRODUCT CATALOGUE
21
Our maritime
solutions keep
WILHELMSEN
SHIPS SERVICE
PRODUCT CATALOGUE
your vessels
working safely
and effectively.
22
Expertise and
know-how to
WILHELMSEN
SHIPS SERVICE
PRODUCT CATALOGUE
keep your eet
at maximum
efficiency.
OUR OFFER
24
SAFETY PRODUCTS MARITIME LOGISTICS SHIPS AGENCY
AND SERVICES Every day 24/7, were a connection force We offer husbandry, full agency, HUB
The only rule in maritime regulations is in keeping your business on the move and protective agency. As a trusted
constant change. We know that safety with our freight forwarding and project extension of your team we are a
matters and that is why weve built a based logistics for complex and heavy connecting force in simplifying your port
worldwide network of regulatory know- cargo. We provide commercial and operations. Therefore, we have re-
how designed to keep your fleet operational services in local markets defined the way ships agents handle port
compliant and on the move. We deliver around the world, including a broad calls, by standardising procedures to
fire, rescue and safety services with our range of capabilities extending beyond ensure that you receive consistent
high quality Unitor products for fire traditional ship agency and a service in all 2,400 ports where we
protection, personal safety, life saving, comprehensive logistics support operate. We are constantly working to
medical and environmental solutions. In package. Capitalising on our international offer you better global coordination to
addition we offer safety inspection maritime network across the Wilh. better serve your global business. We
services worldwide. So, wherever you Wilhelmsen Group, we offer you global believe total port call solutions give
are, whatever your business, we have the reach with local experts on duty in 80 streamlined operations, improved cash
safety solutions you need to run your countries. Together we provide management, enhanced documentation
vessels with maximum efficiency. With customized end-to-end solutions and communication flow making your
us as your compliance partner, you can based on air, sea and land transport operations more efficient.
keep your fleet moving without a complete connection taking your
compromise. cargo from A to B.
25
Health,
safety and
WILHELMSEN
SHIPS SERVICE
PRODUCT CATALOGUE environment.
26
PRODUCT LABELS AND SDS
Wilhelmsen Ships Service has a full
range of effective and sustainable
chemicals for use on board ships.
To avoid injury, it is vital for ships staff
who handle and use chemical related
products to understand the hazardous
properties of the product they are using,
how it should be used, which protective
measures are appropriate and what to
do in case of an accident. To assist the
users on board, our marine chemicals
include a unique product labelling
system on every pail or drum of
product delivered.
Each label includes:
t Multi-lingual risk and safety phrases
with pictograms indicating hazardous
properties
t Specic information on transportation
classication
t Emergency telephone numbers
(manned 24 hours a day)
t Addresses of Wilhelmsen Ships
Services major chemical ofces
t Complete product description,
directions for use and dose rates
t Colour coded borders for easy
identication
t Complete Safety Data Sheets (SDS)
Safety Data Sheets for all Unitor
and Naleet chemical products are
downloadable in PDF format from
Wilhelmsen Ships Services web site:
wilhelmsen.com/shipsservice
SDS LANGUAGES
SDSs are available in 23 different
languages:
Bulgarian, Chinese (simplied and
traditional), Danish, Dutch, English,
Estonian, Finnish, French, German,
Greek, Italian, Korean, Latvian, Lithuanian,
Norwegian, Polish, Portuguese, Romanian,
Russian, Spanish, Swedish and Turkish.
All chemicals and gases can be
dangerous to both people and the
environment if used incorrectly. It is
strongly recommended to follow all
safety and handling instructions
for all chemical products.
27
WILHELMSEN
SHIPS SERVICE
PRODUCT CATALOGUE
CHILE
Telephone daytime: (+55) 21 25828000 INDIA
Telephone after hours: (+55) 21 81622731/32 Telephone Daytime (+91) 22 663 75 500
Fax: (+55) 21 25828001 Telephone After hours (+91) 99 872 62 461
E-mail: wss.southamerica.cs@wilhelmsen.com Fax (+91) 22 434 15 580/581
Email: wss.india.cs@wilhelmsen.com
CHINA
Telephone daytime (+86) 21 6086 3800 ITALY
Telephone after hours (+86) 138 188 7605 Telephone Daytime (+39) 010 6142101
Fax (+86) 21 6086 3811 Telephone After hours (+39) 335 7539245
Email: wss.shanghai.cs@wilhelmsen.com Fax (+39) 010 6142196
Email: wss.italy.cs@wilhelmsen.com
CYPRUS
Telephone Daytime (+357) 25 344696 JAPAN
Telephone After hours (+357) 99 533558 Telephone Daytime (+81) 45 775 0011
Fax (+357) 25 356478 Telephone After hours (+81) 45 775 0012
Email: wss.cyprus.cs@wilhelmsen.com Fax (+81) 45 775 0070
Email: wss.japan.cs@wilhelmsen.com
DENMARK
Telephone Daytime (+45) 36 77 36 13 KOREA
Telephone After hours (+45) 36 77 36 13 Telephone Daytime (+82) 51 728 4900
Fax (+45) 36 49 35 62 Telephone After hours (+82) 10 2568 0089
Email: wss.denmark.cs@wilhelmsen.com Fax (+82) 51 728 3918
Email: wss.korea.cs@wilhelmsen.com
EGYPT
Telephone Daytime (+20) 3 485 6094 LATVIA
Telephone After hours (+20) 123 129 993 Telephone Daytime (+371) 67321115
Fax (+20) 3 485 6094 Telephone After hours (+371) 29108244
Email: wss.egypt.cs@wilhelmsen.com Fax (+371) 67321125
Email: wss.latvia.cs@wilhelmsen.com
FINLAND
Telephone Daytime (+358) 96 80 36 40 NETHERLANDS
Telephone After hours (+358) 50 59 31 114 Telephone Daytime (+31) 10 4877 920
Fax (+358) 96 82 08 60 Telephone After hours (+31) 62 0420 248
Email: wss.nland.cs@wilhelmsen.com Fax (+31) 10 4949 303
Email: wss.netherlands.cs@wilhelmsen.com
GERMANY
Telephone Daytime (+49) 42 8293130 NORTH AMERICA
Telephone After hours (+49) 42 8293130 Telephone Daytime
Fax (+49) 42 82593153 Toll-free: (+1) 866 266 9371
Email: wss.germany.cs@wilhelmsen.com Ofcephone: (+1) 281 291 0333
Telephone After hours (+1) 281 685 5022
Tollfreefax: (+)1 866 266 9372
GREECE Localfax: (+1) 281 291 0888
Telephone Daytime (+30) 210 4239100 Email: wss.northamerica.cs@wilhelmsen.com
Telephone After hours (+30) 6946 063860
Fax (+30) 210 4212480
Email: wss.greece.cs@wilhelmsen.com
28
NORWAY TAIWAN
Telephone Daytime (+47) 22 13 14 15 Telephone Daytime (+886) 2 2502 5222
Telephone After hours (+47) 91 37 43 02 Ext 334
Fax (+47) 22 13 45 05 Telephone After hours (+886) 9 3215 6847
Email: wss.norway.cs@wilhelmsen.com Fax (+886) 2 2509 5733
Email: wss.taipei.cs@wilhelmsen.com
POLAND
Telephone Daytime (+48) 91 8813 211 TURKEY
Telephone After hours (+48) 728993992 Telephone Daytime (+90) 216 681 3333
Fax (+48) 91 8813 201 Telephone After hours (+90) 530 413 7180
Email: wss.poland.cs@wilhelmsen.com Fax (+90) 216 425 5463
Email: wss.turkey.cs@wilhelmsen.com
RUSSIA (MURMANSK)
Telephone Daytime (+7) 8152 458496 UKRAINE
Telephone After hours (+7) 921 171 9448 Telephone Daytime (+380) 482 366 608/9
Fax (+7) 8152 452314 Telephone After hours (+380) 675 198 681
Email: wss.murmansk.cs@wilhelmsen.com (+380) 503 909 095
Fax (+380) 482 366 609
Email: wss.ukraine.cs@wilhelmsen.com
RUSSIA (ST. PETERSBURG)
Telephone Daytime (+7) 8127 030273
Telephone After hours (+7) 8129 348803 UNITED ARAB EMIRATES
Fax (+7) 8127 030274 Telephone Daytime (+971) 4 382 3900
Email: wss.stpetersburg.cs@wilhelmsen.com Telephone After hours (+971) 50 552 3604
Fax (+971) 4 395 1155
Email: wss.uae.cs@wilhelmsen.com
RUSSIA (VLADIVOSTOK)
Telephone Daytime (+7) 4232 300659
Telephone After hours +7 914 707 15 44 UNITED KINGDOM
Fax (+7) 4233 402255 Telephone Daytime (+44) 1322 282 400
Email: wss.vladivostok.cs@wilhelmsen.com Telephone After hours (+44) 7710 919 601
Fax (+44) 1322 620 660
Email: wss.uk.cs@wilhelmsen.com
SINGAPORE
Telephone Daytime (+65) 6395 4907
Telephone After hours (+65) 9669 7017
Fax (+65) 6872 6319
Email: wss.singapore.cs@wilhelmsen.com
Please visit the Network Directory on our website for a complete list of contact details per country,
port and service offer: wilhelmsen.com/shipsservice
Given our global network serving 2,400 ports of various size and trade pattern, some products may
not be immediately available at every service location. Our Customer Services will be able to answer
any questions regarding availability or lead time for our product range.
29
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!5-0360%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!5-0360%'9*%
93/52$&0"(&
MARINE PRODUCTS
PUMPS
CHE
HEMIC
MICA
AL P
PUUMP L
LEEVER T
TYYPE
422 637447
Features
Fast and simple liquid transfer
Flexible
Benets
Cost effective
Ideal for smaller quantities of liquid
No electrical parts
Accessories
Product number Product name
655514 CONNECTION FOR HAND PUMP F/25L PAIL
32
MA
MARRINE P
PRRODUCTS Pumps
Barrel Pumps
1:
1:11 O
OIL
IL P
PUUMP W
WIT
ITH
HSSP
POUT
422 711291
Features
High ow, low pressure
Benets
Handles most light to medium viscosity uids
Technical data
33
MA
MARRINE P
PRRODUCTS Pumps
Barrel Pumps
2:
2:11 C
CHE
HEMIC
MICAAL P
PUUMP S
SSST316
422 718890
Features
Efcient uid transfer
Benets
Reliable air-operated unit
Technical data The Unitor 2:1 pump in 316 stainless steel is designed to
move a broad spectrum of uids compatible with AISI 316,
Max operating pressure 10 bar Viton and PFTE seals. It may NOT be used for other
Flow capacity, max 30 L/min purposes or for pumping gasoline, or other explosive liquids.
Air consumption 0.9 m3/min The unit is designed for 200 litre drums; a spout and needle
for ow control are supplied. Maximum permitted air
pressure is 10 bar and this limit should NOT be exceeded.
34
MA
MARRINE P
PRRODUCTS Pumps
Chemical Applicators
10:
10:11 HY
HYDDRA C
CLLEAN C
CHE
HEMIC
MICAAL A
APPPLIC
ICAATOR
421 625293
Features
Supplied ready for use including lubricator, hoses,
spray gun and nozzle
Stainless steel construction (AISI 304) with chemical
resistant packings
Can be used with cold or hot water up to 95 C
Benets
Fits all open head universal drums
Air driven motors enable use in explosion classied areas
Technical data uids and chemical injection into pressurised systems, e.g
tank cleaning systems.
Max working pressure 75 bar
Application areas
Flowrate, normal 11.4 l/h
Air consumption 1.4 m3/min Applying chemicals and detergent onto surface
Washing down
With correct accessories this unit can apply chemicals General transfer of uids
vertically up to 12 m. Ideal for applying chemicals and Injection of chemicals into pressurised system, e.g.
detergents onto surface, washing down, general transfer of tank cleaning systems
Accessories
Product number Product name
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
Spare parts available for purchase:
625343 REPAIR KIT, LOWER PUMP
588434 REPAIR KIT FOR AIR MOTOR
35
MA
MARRINE P
PRRODUCTS Pumps
Chemical Applicators
2:
2:11 C
CHE
HEMIC
MICAAL A
APPPLIC
ICAATOR
422 718700
Features
Fits in any standard 200 litre drum
Supplied ready for use
Pre-lubricated air motor, has no need for an air
lubricator
Benets
Very low noise emission enables use onboard cruise
or passenger vessels
Technical data This unit has been developed as an easy to use and
economical alternative to the 10:1 Hydra Clean and is
Weight 15.8 kg supplied ready to use with a hose, gun and drum ttings.
Pressure 20 bar The unit is designed to be mounted in a 200 litre/55 gallon
Connection size/type 1/4'' drum. With the correct accessories this unit can apply
chemicals vertically up to 10 m.
Flowrate, normal 600 l/h
Air consumption 0.9 m3/min
Accessories
Product number Product name
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
36
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 30
307
7PPO
OLYPROPYLENE
422 604918
Features
Easy maintenance
Fluid compatibility
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids up to 0.09 in (2.29 mm)
Excellent for abrasive, low-to-medium viscosity uids and shear sensitive materials
Accessories
Product number Product name
607830 STAINLESS NIPPLE F/307
607832 FLUID SECTION REPAIR KIT F/MOD. 307
607833 AIR VALVE KIT
37
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 515 P
POOLYPROPYLENE
422 634787
Features
Easy maintenance
Fluid compatibility
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids
up to 0.09" (2.29 mm)
Excellent for abrasive, low-to-medium viscosity uids
and shear sensitive materials
Accessories
Spare parts available for purchase:
38
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 7
716
16 S
STTAINL
INLEESS S
STTEEL
422 634803
Features
Easy maintenance
Fluid compatibility
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids
up to 0.09" (2.29 mm)
Excellent for abrasive, low to medium viscosity uids
and shear sensitive materials
Accessories
Product number Product name
634819 DRUM SUCT. KIT F.515/716
Spare parts available for purchase:
634795 SERVICE KIT F. 515/716
634811 AIR VALVE REP KIT
39
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 1050
POLYPROPLYLENE
422 777992
The polypropylene diaphragm pump is built with the highest quality precision parts. Long-lasting even
when used with abrasive uids, making this product very cost effective. Professionals turn to this pump
because it offers an easy, hands-off solution to your uid handling needs.
Features
Easy maintenance
Fluid compatibility
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids up to 0.09" (2.29 mm)
Excellent for abrasive, low-to-medium viscosity uids and shear sensitive materials
Technical data The 1" (25.4 mm) Husky 1050 double diaphragm pump
features a stall-free, low pulsation air valve which provides a
Flow capacity, max 189 l/min smooth and rapid changeover. Available in aluminum,
Suction height 8.8 m polypropylene, conductive polypropylene, PVDF, stainless
Material Polypropylene steel and hastelloy uid sections.
Connection size/type 1" 20% increase in uid ow compared to the Husky 1040.
Weight 8.2 kg
40
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 1050 A
ALLUMINIU
MINIUMM
422 777990
Features
Easy maintenance
Fluid compatibility
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids up to 0.09" (2.29 mm)
Excellent for abrasive, low to medium viscosity uids and shear sensitive materials
Technical data The 1" (25.4 mm) Husky 1050 double diaphragm pump
features a stall-free, low pulsation air valve which provides a
Flow Capacity, max 189 l/min smooth and rapid changeover. Available in aluminum,
Suction height 8,8 m polypropylene, conductive polypropylene, PVDF, stainless
Weight 10,5 kg steel and hastelloy uid sections.
Connection size/type 1" 20% increase in uid ow compared to the Husky 1040.
41
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 1050 S
STTAINL
INLEESS S
STTEEL
422 777991
Features
Easy maintenance
Fluid compatibility
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids up to 0.09" (2.29 mm)
Excellent for abrasive, low-to-medium viscosity uids and shear sensitive materials
Technical data The 1" (25.4 mm) Husky 1050 double diaphragm pump
features a stall-free, low pulsation air valve which provides a
Flow Capacity, max 189 l/min smooth and rapid changeover. Available in aluminum,
Suction Height 8,8 m polypropylene, conductive polypropylene, PVDF, stainless
Connection size/type 1" steel and hastelloy uid sections.
Weight 16,9 kg 20% increase in uid ow compared to the Husky 1040.
42
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 15
1590
90 P
POOLYPROPYLENE
422 718643
Features
Easy maintenance
Fluid compatibility
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids
up to 0.09" (2.29 mm)
Excellent for abrasive, low-to-medium viscosity uids
and shear sensitive materials
Accessories
Product number Product name
718650 HOSE FLANGE FOR 1590 POLYPROPYLENE
742916 SUCTION HOSE FOR 1590
729462 HOSE NIPPLES FOR 1590 PUMP
43
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 15
1590
90 A
ALLUMINIU
MINIUMM
422 718635
Features
Easy maintenance
Fluid compatibility
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids
up to 0.09" (2.29 mm)
Excellent for abrasive, low to medium viscosity uids
and shear sensitive materials
This is the highest capacity double diaphragm pump in its Typical uids handled by this pump:
price class. With all the same durable features of the smaller
Oil: light oil, gear oil, mineral oil
model, the 1590 has 1.5" npt ports that can take on the
heavier, more viscous materials and pump them faster with Fuel: diesel, leaded petrol/gasoline, fuel oil
greater tolerance for suspended solids. Model 1590 has an Other: seawater/brine, general waste water, white
spirit, alcohol
air valve system that is 100% servicable without disassembly
of the wetted parts, saving valuable maintenance time. This
pump requires no air line lubrication, which also saves
money.
Accessories
Product number Product name
742916 SUCTION HOSE FOR 1590
729462 HOSE NIPPLES FOR 1590 PUMP
44
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 2150 A
ALLUMINIU
MINIUMM
422 604926
Features
Easy maintenance
Fluid compatiability
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids
up to 0.09" (2.29 mm)
Excellent for abrasive, low-to-medium viscosity uids
and shear sensitive materials
This is the highest capacity 1" and 2" double diaphragm Model 1050 is a 1", 1590 is 1.5" double diaphragm pump
pump in its price class. With all the same durable features of for similar applications. See 'Technical data' for more
the smaller model, the 2150 has 2" npt ports that can take information.
on the heavier, more viscous materials and pump them
Typical uids handled by this pump:
faster with greater tolerance for suspended solids. Model
1050, 1590 and 2150 has an air valve system that is 100% Oil: light oil, gear oil, mineral oil
servicable without disassembly of the wetted parts, saving Fuel: diesel, leaded petrol/gasoline, fuel oil
valuable maintenance time. This pump requires no air line Other: seawater/brine, general waste water, white
lubrication, which also saves money. spirit, alcohol
Highest reliability air valves for stall-free operation
Accessories
Product number Product name
729463 HOSE NIPPLES FOR 2150 PUMP
607817 SUCTION HOSE 2 IN 5 MTR
Spare parts available for purchase:
607835 FLUID KIT F/MOD 2150 ALUM
45
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 2150 S
STTAINL
INLEESS S
STTEEL
422 607747
Features
Easy maintenance
Fluid compatiability
Unique, patented air valves
Precision-tted parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids
up to 0.09" (2.29 mm)
Excellent for abrasive, low to medium viscosity uids
and shear sensitive materials
Technical data valuable maintenance time. This pump requires no air line
lubrication, which also saves money.
Flow capacity, max 568 l/min
Suction height 5.48 m Highest reliability air valves for stall-free operation
Material Stainless steel No-lube air valves reduce routine maintenance
High ow design with complete range of diaphragm
Connection size/type 2" options
Weight 50 kg Rugged construction for long, trouble-free
perfomance
This is the highest capacity 1" and 2" double diaphragm Ideal for spill response and all types of transfer
pump in its price class. With all the same durable features of applications
the smaller model, the 2150 has 2" npt ports that can take
on the heavier, more viscous materials and pump them Model 1050 is a 1", 1590 is 1.5" double diaphragm pump
faster with greater tolerance for suspended solids. Model for similar applications. See 'Technical data' for more
information.
1050, 1590 and 2150 has an air valve system that is 100%
servicable without disassembly of the wetted parts, saving
Accessories
Product number Product name
607817 SUCTION HOSE 2 IN 5 MTR
Spare parts available for purchase:
618884 FLUID KIT FOR SST 2150
607834 AIR VALVE SEAL KIT
729463 HOSE NIPPLES FOR 2150 PUMP
46
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP 32
32775 A
ALLUMINIU
MINIUMM
422 634851
Features
Easy maintenance
Fluid compatiability
Unique, patented air valves
Precision-tted Parts
Benets
Quick priming and immediate ow of product
Handles uid viscosities up to 5000 cps and solids up to 0.09" (2.29 mm)
Excellent for abrasive, low to medium viscosity uids and shear sensitive materials
Accessories
Product number Product name
634907 HOSE FLANGE F/3275, CST
Spare parts available for purchase:
634859 SERVICE KIT F/ALUM. 3275
634867 AIR VALVE REP KIT
47
MA
MARRINE P
PRRODUCTS Pumps
Double Diaphragm Pumps
DOUBLE D
DIA
IAP
PHR
HRA
AGM P
PUUMP A
AC
CCESSORIE
IESS
Accessories
Product number Product name
607832 FLUID SECTION REPAIR KIT F/MOD. 307
634795 SERVICE KIT F. 515/716
617738 FLUID KIT F/1040 SST + POLY
617712 FLUID KIT F/MOD 1040 ALIUM
607835 FLUID KIT F/MOD 2150 ALUM
618884 FLUID KIT FOR SST 2150
634859 SERVICE KIT F/ALUM. 3275
Air valve seal kits for diaphragm pumps:
607833 AIR VALVE KIT
634811 AIR VALVE REP KIT
607834 AIR VALVE SEAL KIT
634867 AIR VALVE REP KIT
48
MA
MARRINE P
PRRODUCTS Pumps
Grease Pumps
GREASE P
PUUMP 50:
50:1,
1, F
FOOR 50 K
KG
GDDR
RUMS
422 711309
The 50:1 grease pump is recommended in mobile pump equipment and small systems with 1-2
outlets.
Features
For greases with viscosity up to NLGI 3
Benets
Fast grease transfer, saving time
Fits several sized drums
Technical data The pump package includes a 2" bunge adapter for
mounting the pump on top of the drum cover as well as a
Hose length 6m hose and applicator gun. The 50 kg unit is, in addition,
Connection size/type 1/4'' supplied with a trolley for easy transport of the heavy grease
Ratio 50:1 drums.
The units are based on the same parts and all parts except
The Unitor 50:1 grease pump series features a unique air one are interchangeable. This enables a reduction in spare
motor that enables quiet and reliable operations as well as part stocks and makes it easier to have two sizes of pumps
quick serviceability. on board.
The pumps are recommended for mobile units and piped
installations of moderate length, and are designed to
dispense greases with a viscosity up to NLGI 3.
Accessories
Product number Product name
635267 5 GAL. ADAPTOR F. CART
635259 CART F/GREASE PUMP
655605 GREASE HOSE 1/4", 6M
655639 HOSE FLEXIBLE FOR GREASEGUN 45CM
655621 UNION 1/4" MALE X 1/4" MALE
49
MA
MARRINE P
PRRODUCTS Accessories & Spares
Chemical Applicators Accessories & Spares
HP E
EXXTEND
NDA
ABLE L
LAANC
NCEE 5.
5.55M
436 659151
Features
3 telescopic tubes reach up to 5.5 m
The Unitor 5.5 m lance has been developed in order to high volume or 0 for spot cleaning. The lance can be used
enable chemical application above the normal reach of any with both the 10:1 and the smaller 2:1 chemical pumps as
standard pump. The lance has 3 telescopic tubes which, well as the high pressure cleaners.
when extended, slide out to a full length of 5.5 m. Inside the Typical set up
sliding tubes the uid is transported using a 3/8" hose which
starts at the trigger and exits at the end of the lance in a Pump > Hose quick connector M & F > Heavy duty hose >
quick connector. The quick connector enables rapid Hose quick connector F & M > 5.5 m lance > 25 nozzle
changing of the nozzle according to the task at hand- 25 for
Accessories
Product number Product name
Nozzles:
718627 NOZZLE 03/25DGR. F/EXTENDABLE LANCE
718619 NOZZLE 03/0DGR. F/EXTENDABLE LANCE
Hoses:
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
50
MA
MARRINE P
PRRODUCTS Accessories & Spares
Double Diaphragm Accessories & Spares
DRUM S
SUUCT. K
KIT
IT F
FOOR 515
515/7
/716
16
423 634819
The drum suction kit ts direct onto the centre suction port on the Husky 515 and 716 pump. It is
made of stainless steel for maximum corrosion resistance and is delivered with a 2" bung hole adapter
for tight connection to the drum.
SERVIC
ICEEK
KIT
IT F
FOOR 515
515/7
/716
16
423 634795
51
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"*.402"8*.(60%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"*.402"8*.(60%'9*%
93/52$&0"(&
MARINE PRODUCTS
PAINT SPRAYING
UNIT
NITO
OR HU
HURRRIC
ICAANE 25D
420 732313
Features
High power to weight ratio
High durability and quality
Mobile
Accessories
Product number Product name
718908 HOSE 1/4" 15M FOR PAINT SPRAYING
588467 FLEX WHIP HOSE 1/4IN 1 MTR
718882 HOSE 3/8" 15M FOR PAINT SPRAYING
718916 SWIVEL NIPPLE 3/8"M X 3/8"F
718924 SWIVEL NIPPLE 1/4"M X 1/4"F
734756 AIRLESS PAINT SPRAYING GUN 32
729290 FLUID FILTER FOR HURRICANE 32 & 25D
728964 POLEGUN 1.3M FOR PAINT SPRAYING
728956 POLEGUN 1.8M FOR PAINT SPRAYING
728949 POLEGUN 3M FOR PAINT SPRAYING
614511 HOSE ADAPTOR 1/4"M 3/8"M
606469 HOSE ADAPTOR
Spare parts available for purchase:
729152 REP KIT AIR MOTOR HURRICANE 25D
729153 REP KIT LOWER PUMP HURRICANE 25D
54
UNIT
NITO
OR HU
HURRRIC
ICAANE 32
420 732305
Features
High power to weight ratio
Light-weight
High durability and quality
Mobile
Accessories
Product number Product name
718882 HOSE 3/8" 15M FOR PAINT SPRAYING
718908 HOSE 1/4" 15M FOR PAINT SPRAYING
718916 SWIVEL NIPPLE 3/8"M X 3/8"F
614511 HOSE ADAPTOR 1/4"M 3/8"M
718924 SWIVEL NIPPLE 1/4"M X 1/4"F
729289 FILTER SUPPORT F/HURRICANE 32 & 25D
729290 FLUID FILTER FOR HURRICANE 32 & 25D
734756 AIRLESS PAINT SPRAYING GUN 32
728964 POLEGUN 1.3M FOR PAINT SPRAYING
728956 POLEGUN 1.8M FOR PAINT SPRAYING
728949 POLEGUN 3M FOR PAINT SPRAYING
606469 HOSE ADAPTOR
588467 FLEX WHIP HOSE 1/4IN 1 MTR
Spare parts available for purchase:
729155 REP KIT LOWER PUMP HURRICANE 32
729154 REP KIT AIR MOTOR HURRICANE 32
55
UNIT
NITO
OR HU
HURRRIC
ICAANE 45
420 732297
Features
High power to weight ratio
Light-weight
High durability and quality
Mobile - balanced cart
Flow capacity, max 12.7 l/min Easy to move around the vessel
Max operating pressure 270 bar Reaches even "hard to get to" areas
Ratio 45:1 Long lifespan and less downtime
Supplied ready to use - "plug and play"
Weight 89 kg
Accessories
Product number Product name
718882 HOSE 3/8" 15M FOR PAINT SPRAYING
718908 HOSE 1/4" 15M FOR PAINT SPRAYING
588467 FLEX WHIP HOSE 1/4IN 1 MTR
718916 SWIVEL NIPPLE 3/8"M X 3/8"F
718924 SWIVEL NIPPLE 1/4"M X 1/4"F
729288 FILTER SUPPORT F/HURRICANE 45 & 73
729285 O-RING F/HURRICANE 45 & 73
734764 AIRLESS PAINT SPRAYING GUN 73
728949 POLEGUN 3M FOR PAINT SPRAYING
728956 POLEGUN 1.8M FOR PAINT SPRAYING
728964 POLEGUN 1.3M FOR PAINT SPRAYING
606469 HOSE ADAPTOR
614511 HOSE ADAPTOR 1/4"M 3/8"M
729286 FLUID FILTER F/HURRICANE 45 & 73
Spare parts available for purchase:
729156 REP KIT AIR MOTOR HURRICANE 45
729157 REP KIT LOWER PUMP HURRICANE 45
56
UNIT
NITO
OR HU
HURRRIC
ICAANE 7
73
3
420 732289
Features
High power to weight ratio
Light-weight
High durability and quality
Mobile
Accessories
Product number Product name
718882 HOSE 3/8" 15M FOR PAINT SPRAYING
718908 HOSE 1/4" 15M FOR PAINT SPRAYING
588467 FLEX WHIP HOSE 1/4IN 1 MTR
718916 SWIVEL NIPPLE 3/8"M X 3/8"F
718924 SWIVEL NIPPLE 1/4"M X 1/4"F
729288 FILTER SUPPORT F/HURRICANE 45 & 73
729285 O-RING F/HURRICANE 45 & 73
734764 AIRLESS PAINT SPRAYING GUN 73
728964 POLEGUN 1.3M FOR PAINT SPRAYING
728956 POLEGUN 1.8M FOR PAINT SPRAYING
728949 POLEGUN 3M FOR PAINT SPRAYING
606469 HOSE ADAPTOR
614511 HOSE ADAPTOR 1/4"M 3/8"M
729286 FLUID FILTER F/HURRICANE 45 & 73
Spare parts available for purchase:
729158 REP KIT AIR MOTOR HURRICANE 73
729159 REP KIT LOWER PUMP HURRICANE 73
57
MA
MARRINE P
PRRODUCTS Accessories, Consumables & Spares
Accessories for Airless Paint Spraying Equipment
POLEGUN F
FOOR P
PA
AINT S
SPPRAYING
Features
Flexible
Benets
Reach high areas
Ordering information
Product number Product name
728964 POLEGUN 1.3M FOR PAINT SPRAYING
728956 POLEGUN 1.8M FOR PAINT SPRAYING
728949 POLEGUN 3M FOR PAINT SPRAYING
AIR
IRLLESS P
PA
AINT S
SPPRAYING E
EQQUIP
IPME
MENT
NT A
AC
CC.
The following list of accessories are for the Unitor Hurricane airless paint spraying equipment range.
Ordering information
Product number Product name
718882 HOSE 3/8" 15M FOR PAINT SPRAYING
718908 HOSE 1/4" 15M FOR PAINT SPRAYING
588467 FLEX WHIP HOSE 1/4IN 1 MTR
588525 FLUID FILTER 60 MESH 2PCS
606469 HOSE ADAPTOR
606472 FILTER SCREEN SUPPORT
614511 HOSE ADAPTOR 1/4"M 3/8"M
718916 SWIVEL NIPPLE 3/8"M X 3/8"F
718924 SWIVEL NIPPLE 1/4"M X 1/4"F
729285 O-RING F/HURRICANE 45 & 73
729288 FILTER SUPPORT F/HURRICANE 45 & 73
729289 FILTER SUPPORT F/HURRICANE 32 & 25D
729290 FLUID FILTER FOR HURRICANE 32 & 25D
729286 FLUID FILTER F/HURRICANE 45 & 73
625319 AGITATOR F. 10 GAL PAIL
625327 AGITATOR F. 5 GAL PAIL
58
MA
MARRINE P
PRRODUCTS Accessories, Consumables & Spares
Accessories for Airless Paint Spraying Equipment
AGIT
ITA
ATOR G
GAALLON P
PA
AIL
Ordering information
Product number Product name
625319 AGITATOR F. 10 GAL PAIL
625327 AGITATOR F. 5 GAL PAIL
AIR
IRLLESS P
PA
AINT S
SPPRAYING G
GUUN
Ordering information
Product name Product number
AIRLESS PAINT SPRAYING GUN 32 734756
AIRLESS PAINT SPRAYING GUN 73 734764
59
MA
MARRINE P
PRRODUCTS Accessories, Consumables & Spares
Consumables for Airless Paint Spraying Unit
HD R
RAAC T
TIP
IP
426 634971
Standard for all Unitor paint spraying units. Enables use of GHD spray tips. Select spray tips separately
from GHD table.
Ordering information
Product number Product name
634971 HD RAC TIP NO GHD 615
588566 HD RAC TIP SIZE 617
588558 HD RAC TIP SIZE 619
588541 HD RAC TIP SIZE 621
588590 HD RAC TIP SIZE 623
634979 HD RAC TIP NO GHD 625
588582 HD RAC TIP SIZE 627
634987 HD RAC TIP NO GHD 629
634995 HD RAC TIP NO GHD 631
THR
HROOAT S
SEEAL L
LIQ
IQU
UID 1 L
427 588517
Throat seal liquid is applied on all paint spray units in the throat oil cup to prevent paint from sticking to
the piston rod. Prolongs lifetime of the pump seals by 5 to 10 times when used regularly.
60
MA
MARRINE P
PRRODUCTS Accessories, Consumables & Spares
Rep Kits and Spare Parts for Airless Paint Spraying Equip
REP K
KIT
IT HU
HURRRIC
ICAANE
Ordering information
Product number Product name
729152 REP KIT AIR MOTOR HURRICANE 25D
729153 REP KIT LOWER PUMP HURRICANE 25D
729154 REP KIT AIR MOTOR HURRICANE 32
729155 REP KIT LOWER PUMP HURRICANE 32
729156 REP KIT AIR MOTOR HURRICANE 45
729157 REP KIT LOWER PUMP HURRICANE 45
729158 REP KIT AIR MOTOR HURRICANE 73
729159 REP KIT LOWER PUMP HURRICANE 73
61
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!*2//,360%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!*2//,360%'9*%
93/52$&0"(&
MARINE PRODUCTS
AIR TOOLS
AIR HO
HOSSE, P
PVVC
Ordering information
Product number Product name
671693 AIR HOSE 1/4", PVC
671701 AIR HOSE 3/8", PVC
671719 AIR HOSE 1/2", PVC
671727 AIR HOSE 3/4", PVC
671735 AIR HOSE 1", PVC
AIR HO
HOSSE, R
RUUBBER
Ordering information
Product number Product name
671743 AIR HOSE 1/4", RUBBER
671750 AIR HOSE 3/8", RUBBER
671768 AIR HOSE 1/2", RUBBER
671776 AIR HOSE 3/4", RUBBER LTH=50MTR
671786 AIR HOSE 1", RUBBER
64
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Air Line Equipment
AIR L
LINE
INE U
UNIT
NIT F
FIL
IL/R
/REEG/L
/LU
UB
401 624585
Features
The unit is compact and the stainless steel frame
(316 SST) gives exceptionally good protection of the
fragile parts in case of tip-over
The low centre of gravity of the unit increases stability
and the Unitor series 400 stainless quick couplings
at both inlet and outlet simplies operation
The FRL unit also features outlets by-passing the
lubricator for oil free air
Benets
Unitor airline unit lowers the maintenance costs and
adds years of trouble free operation to every air
operated tool
Ordering information
Product number Product name
191858 400 UPH PLUG 1/2'' HOSE
191700 400 USH SOCKET 1/2'' HOSE
65
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Air Line Equipment
FLEXIB
IBLLE HO
HOSSE 30C
30CMM3
3//8"
401 183418
Features
3/8" X2B
3/8" male in one end
Plug ts 20, 30 and 40 series Unitor quick coupling
Working pressure max 300 PSI / max 20 bar
Technical data
Length 300 mm
HO
HOSSE C
CLLAMP F
FOOR 3
3//8" HO
HOSSE
401 729443
66
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Air Gun
AIR G
GUUN A
AG
G-P
-PR
RO
Ordering information
Product number Product name
718940 AIR GUN AG-PRO 10
718957 AIR GUN AG-PRO 30
Accessories
Product number Product name
191874 20 UPM PLUG 1/4'' MALE BSP.T
67
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Deck Scalers
DECK P
PLLANNE
NNERRD
DPP-P
-PRRO 200
400 734046
Features
Fully adjustable operating height
Vacuum port as standard
Accurate depth control
Variety of accessories
Benets
Operator comfort
Enable dust control if used with an industrial dust collector
To regulate material removal to desired effect
Offers the correct tool for every application
Technical data preparation and material removal from large area steel deck
surfaces. At 45 kg it is light enough to easily manoeuvre
Connection size/type 3/4'' between levels and the accurate depth control and variety of
Air consumption 4,6 m3/min accessories enables material from light rust to heavy scale or
Rotation speed 1600 RPM paint to be removed at a rapid rate. Simple to use, the DP
Pro 200 will take minimal operator training & requires little
Cutting width 195 mm
after sales management.
Accessories
Product number Product name
Consumables:
734053 CUTTING WHEEL REPL. KIT, DP-PRO 200
Accessories:
191965 600 UPF PLUG 3/4'' FEMALE BSP.T
68
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Deck Scalers
DECK S
SCCALER D
DSSH-P
H-PRRO 11
400 734061
Features
Vibration damped
Low prole body height
Optional vacuum shroud available
11 x 3000 blows per minute
Benets
Increases operator comfort & safety
For cleaning under steps & pipes
To reduce hazardous & nuisance dust when used
with an industrial dust collector
Highly productive & effective means of coatings/
corrosion removal
Technical data The Unitor DSH-PRO 11 is ideally suited for thick coating
removal and surface preparation on large areas of deck and
Connection size/type 3/4'' tank oor cleaning, complimenting the Unitor hand held
Air consumption 1,9 m3/min scaling hammer range. Eleven heads impacting at 3000
Hamer frequency 11 x 3000 blows/min strokes per minute break down the hardest of coatings.
Cutting width 252 mm
Accessories
Product number Product name
Consumables:
734079 HAMMER REPLACEMENT KIT, DSH-PRO 11
Accessories:
191965 600 UPF PLUG 3/4'' FEMALE BSP.T
69
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Drills
DRIL
ILLLR
REEVERSIB
IBLLE A
ADD-P
-PRRO 1800
404 722207
Features
Lighter than any electrical drill in its class
Ideal for light to medium drilling operations
Benets
Lightweight
Easy to operate
Exhaust position does not stand in the way of efciency
Technical data
Ordering information
Supplied with: Hose nipple NPT (1 pc)
Accessories
Product number Product name
Accessories:
191874 20 UPM PLUG 1/4'' MALE BSP.T
736587 EAR MUFF HEADBAND VERSION TYPE EXC
632943 SAFETY SPECTACLES CLEAR
Consumables:
614002 DRILL SET,HSS,KM 21,1-13
614005 DRILL SET,HSS,KZ 29
70
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Grinders
ANG
NGLLE G
GRRIND
INDEER A
AG
G-P
-PR
RO 4 B V
VEERSIO
IONN
402 756901
Please note that you must only use Unitor original inherent danger of injury to the operator when using low
consumables due to the high speeds of the units and the quality consumables.
Accessories
Product number Product name
Consumables:
777697 CUP WIRE BRUSH 2.5" W 3/8"X24 UNF
71
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Grinders
ANG
NGLLE G
GRRIND
INDEER
Please note that you must only use Unitor original inherent danger of injury to the operator when using low
consumables due to the high speeds of the units and the quality consumables.
Ordering information
Product number Product name
721985 ANGLE GRINDER AG-PRO 5
721977 ANGLE GRINDER AG-PRO 7
72
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Grinders
DIE G
GRRIND
INDEER D
DGG-P
-PRRO
Compact and easy to handle tools with extremely high operating speeds. The units are compact,
enabling easier operation in conned spaces. Unitor DG-PRO units can be used for a wide range of
tasks such as precision grinding, deburring of machined parts, removing welding slag and shaping of
metals.
Ordering information
Product number Product name
722009 DIE GRINDER DG-PRO 18
722017 DIE GRINDER DG-PRO 22
Accessories
Product number Product name
Consumables:
536797 GRINDING STONES SET 10PCS
Accessories:
191874 20 UPM PLUG 1/4'' MALE BSP.T
73
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Impact Wrenches
IMP
IMPA
ACT W
WRRENC
NCHH
Ordering information
Product number Product name
722173 IMPACT WRENCH IW-PRO 1/2"
722181 IMPACT WRENCH IW-PRO 3/4"
722199 IMPACT WRENCH IW-PRO 1"
74
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Needle Scalers & Chipping Hammers
NE
NEEEDLE S
SCCALER J
JEEX-2800 L
LO
OW V
VIB
IBR
RATIO
IONN
400 682062
Technical data
Length 335 mm
Weight 3.1 kg
Connection size/type 3/8"
Air consumption 0.43 m3/min
Needle size 3&4 mm
Ordering information
Supplied with: Needle supporter 4 mm 1 pc
Bushing 1 pc
Needle 3 x 180 mm 28 pcs Hose nipple 1 pc
Mounted needle 4 x 180 mm 14 pcs
Accessories
Product number Product name
Consumables:
728766 NEEDLES 3MM FOR NS-PRO SERIES
728774 NEEDLES 4MM FOR NS-PRO SERIES
Accessories:
183418 FLEXIBLE HOSE 30CM 3/8IN
75
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Needle Scalers & Chipping Hammers
NE
NEEEDLE S
SCCALER NS
NS-P
-PR
RO 19
400 722033
Features
Heavy duty and highly efcient smaller needle scaler
for applications, on board, where you do not need
the biggest units
These units can be used with 2 mm or 3 mm
needles depending on application
Technical data The NS-PRO chisels operate without springs. This means no
springs to break, no irregular power, and the advantage of
Connection size/type 1/4" low air consumption. The needles adjust automatically to
Air consumption 0.10 m3/min operate efciently on your workpiece irrespective of the
Needle size 2&3 mm contours.
Ordering information
Supplied with: Needle 3 x 180 mm mounted and hose
nipple.
Accessories
Product number Product name
Consumables:
728758 NEEDLES 2MM FOR NS-PRO SERIES
728766 NEEDLES 3MM FOR NS-PRO SERIES
76
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Needle Scalers & Chipping Hammers
NE
NEEEDLE S
SCCALER NS
NS-P
-PR
RO 19 - S
STTRAIG
IGHT
HT
400 722041
Features
Heavy duty and highly efcient smaller needle scaler
for applications, on boaard, where you do not need
the biggest units
These units can be used with 2 mm or 3 mm
needles depending on application
Technical data The NS-PRO chisels operate without springs. This means no
springs to break, no irregular power, and the advantage of
Connection size/type 1/4" low air consumption. The needles adjust automatically to
Air consumption 0.14 m3/min operate efciently on your workpiece irrespective of the
Needle size 2&3 mm contours.
Ordering information
Supplied with: Needle 3 x 180 mm mounted on NS-PRO
19 and hose nipple.
Accessories
Product number Product name
Consumables:
728758 NEEDLES 2MM FOR NS-PRO SERIES
728766 NEEDLES 3MM FOR NS-PRO SERIES
77
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Needle Scalers & Chipping Hammers
NE
NEEEDLE S
SCCALER NS
NS-P
-PR
RO
The NS-PRO chisels operate without springs. This means no operate efciently on your workpiece irrespective of the
springs to break, no irregular power, and the advantage of contours.
low air consumption. The needles adjust automatically to
Ordering information
Product number Product name
722025 NEEDLE SCALER NS-PRO 28
722108 NEEDLE SCALER NS-PRO 66
Accessories
Product number Product name
Consumables:
728758 NEEDLES 2MM FOR NS-PRO SERIES
728766 NEEDLES 3MM FOR NS-PRO SERIES
728774 NEEDLES 4MM FOR NS-PRO SERIES
Accessories:
183418 FLEXIBLE HOSE 30CM 3/8IN
78
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Needle Scalers & Chipping Hammers
CHIS
HISEEL S
SCCALER C
CSS-P
-PRRO
Ordering information
Product number Product name
722116 CHISEL SCALER CS-PRO 62
722124 CHISEL SCALER CS-PRO 120
Accessories
Product number Product name
Consumables:
728832 SCRAPER 100MM FOR CS-PRO 62 & 120
728808 SCRAPER 40MM FOR CS-PRO 62 & 120
728816 SCRAPER 50MM FOR CS-PRO 62 & 120
728824 SCRAPER 70MM FOR CS-PRO 62 & 120
79
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Needle Scalers & Chipping Hammers
CHIS
HISEEL HA
HAMME
MMER
RCCH-P
H-PRRO
Features
Both are compact, economical units designed for all
kinds of chipping work
A ball lock system allows the chisel to be changed
quickly and easily
Locking or releasing the chisel requires only a slight
turn of the stop ring
The rugged construction assures long-lasting
dependability and makes it well suited for use on
board for jobs such as de-slagging and de-spattering
of welds, cleaning metal surfaces of rust and scale, stripping paint, etc
Ordering information
Product number Product name
722132 CHISEL HAMMER CH-PRO 25
722140 CHISEL HAMMER CH-PRO 33
80
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Quick Couplers
USH S
SOOCKET
Features
Time tested and proven over 30 years to be
precision perfect and leakage free
Helps you build efcient air lines everywhere on
board
Benets
Uncompromising standard of quality and ow performance in each and every application
The plug and socket tting portion of couplings 20,30 and connected to a 30 or 40, the only difference being the ow
40 are interchangeable, as are those of the 400, 600 and capacity of the couplings.
800 couplings. This means that a coupling 20 may be
Ordering information
Product number Product name
191676 20 USH SOCKET 1/4'' HOSE
191684 30 USH SOCKET 3/8'' HOSE
191692 40 USH SOCKET 1/2'' HOSE
191700 400 USH SOCKET 1/2'' HOSE
191718 600 USH SOCKET 3/4'' HOSE
633459 800 USH SOCKET 1" HOSE
81
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Quick Couplers
USM S
SOOCKET
405 191726
Features
Time tested and proven for over 30 years to be
precision perfect and leakage free
Helps you build efcient air lines everywhere on
board
Benets
Uncompromising standard of quality and ow
performance in each and every application
The plug and socket tting portion of couplings 20,30 and connected to a 30 or 40, the only difference being the ow
40 are interchangeable, as are those of the 400, 600 and capacity of the couplings.
800 couplings. This means that a coupling 20 may be
Ordering information
Product number Product name
191726 20 USM SOCKET 1/4'' MALE BSP.T
191734 30 USM SOCKET 3/8'' MALE BSP.T
191742 40 USM SOCKET 1/2'' MALE BSP.T
191759 400 USM SOCKET 1/2'' MALE BSP.T
191767 600 USM SOCKET 3/4" MALE BSP.T
633467 800 USM SOCKET 1" MALE BSP.T
82
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Quick Couplers
USF S
SOOCKET
Features
Time tested and proven for over 30 years to be
precision perfect and leakage free
Helps you build efcient air lines everywhere on
board
Benets
Uncompromising standard of quality and ow
performance in each and every application
The plug and socket tting portion of couplings 20, 30 and connected to a 30 or 40, the only difference being the ow
40 are interchangeable, as are those of the 400, 600 and capacity of the couplings.
800 couplings. This means that a coupling 20 may be
Ordering information
Product number Product name
191775 20 USF SOCKET 1/4'' FEMALE BSP.T
191783 30 USF SOCKET 3/8'' FEMALE BSP.T
191791 40 USF SOCKET 1/2'' FEMALE BSP.T
191809 400 USF SOCKET 1/2'' FEMALE BSP.T
191817 600 USF SOCKET 3/4'' FEMALE BSP.T
633475 800 USF SOCKET 1" FEMALE BSP.T
83
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Quick Couplers
UPH P
PLLUG
Features
Time tested and proven for over 30 years to be
precision perfect and leakage free
Helps you build efcient air lines everywhere on
board
Benets
Uncompromising standard of quality and ow
performance in each and every application
The plug and socket tting portion of couplings 20, 30 and connected to a 30 or 40, the only difference being the ow
40 are interchangeable, as are those of the 400, 600 and capacity of the couplings.
800 couplings. This means that a coupling 20 may be
Ordering information
Product number Product name
191825 20 UPH PLUG 1/4'' HOSE
191833 30 UPH PLUG 3/8'' HOSE
191841 40 UPH PLUG 1/2'' HOSE
191858 400 UPH PLUG 1/2'' HOSE
191866 600 UPH PLUG 3/4'' HOSE
633483 800 UPH PLUG 1" HOSE
84
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Quick Couplers
UPM P
PLLUG
Features
Time tested and proven for over 30 years to be
precision perfect and leakage free
Helps you build efcient air lines everywhere on
board
Benets
Uncompromising standard of quality and ow
performance in each and every application
20 UPM socket with 1/4 male thread, for air connection 800 couplings. This means that a coupling 20 may be
system connected to a 30 or 40, the only difference being the ow
capacity of the couplings.
The plug and socket tting portion of couplings 20, 30 and
40 are interchangeable, as are those of the 400, 600 and
Ordering information
Product number Product name
191874 20 UPM PLUG 1/4'' MALE BSP.T
191882 30 UPM PLUG 3/8'' MALE BSP.T
191890 40 UPM PLUG 1/2'' MALE BSP.T
191908 400 UPM PLUG 1/2'' MALE BSP.T
191916 600 UPM PLUG 3/4'' MALE BSP.T
633491 800 UPM PLUG 1" MALE BSP.T
85
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Quick Couplers
UPF P
PLLUG
Helps you build efcient air lines everywhere on board. The Unitor couplers are time tested and proven
to out-perform in all applications and to be totally leakage free.
Features
Time tested and proven for over 30 years to be precision perfect and leakage free
Helps you build efcient air lines everywhere on board
Benets
Uncompromising standard of quality and ow performance in each and every application
316 Stainless steel 800 couplings. This means that a coupling 20 may be
connected to a 30 or 40, the only difference being the ow
The plug and socket tting portion of couplings 20, 30 and
capacity of the couplings.
40 are interchangeable, as are those of the 400, 600 and
Ordering information
Product number Product name
191924 20 UPF PLUG 1/4'' FEMALE BSP.T
191932 30 UPF PLUG 3/8'' FEMALE BSP.T
191940 40 UPF PLUG 1/2'' FEMALE BSP.T
191957 400 UPF PLUG 1/2'' FEMALE BSP.T
191965 600 UPF PLUG 3/4'' FEMALE BSP.T
633499 800 UPF PLUG 1" FEMALE BSP.T
UNIT
NITO
OR D
DRRAIN V
VA
ALVE
405 193474
86
MA
MARRINE P
PRRODUCTS Air Tool Equipment
Quick Couplers
UNIT
NITO
OR Q
QUUIC
ICKKVIE
IEWWP
PRRESSURE G
GAAUGE
405 193482
UNIT
NITO
OR ME
MEDDUSA A
AIR
IR D
DIS
IST
TRIB
IBUUTOR
405 193490
The inlet is from a 1/2" or a 3/4" hose with a 400, 600 and The ve outlets are for 1/4", 3/8" or 1/2" hoses with the
800 series socket. respective 20, 30 or 40 series plug.
The pressure gauge and drain cock t the outlets.
87
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Drills - Accessories, consumables & spares
DRIL
ILLLB
BIT
IT S
SEET ME
METTRIC - HIG
HIGHHS
SPPEED S
STTEEL
440 614002
88
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Deck Scalers - Accessories, consumables & spares
HA
HAMME
MMER
RRRE
EPLACEME
MENT
NT K
KIT
IT D
DSSH-P
H-PRRO 11
401 734079
CUTTING W
WHE
HEE
EL R
REEPLACEME
MENT
NT K
KIT
IT F
FOOR D
DPP-P
-PRRO
200
401 734053
89
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Ear Clamps & Hose Clamps
HO
HOSSE C
CLLAMP
Ordering information
Product number Product name
729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS
729444 HOSE CLAMP FOR 1/2" HOSE (10 PCS)
729445 HOSE CLAMP FOR 3/4" HOSE (10 PCS)
729446 HOSE.CLAMP FOR 1" HOSE (10 PCS)
90
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Ear Clamps & Hose Clamps
CLAMP 1 E
EAAR
Features
Unique clamp design
Specially deburred edges reduce the risk of damage
to the part being clamped
Material stainless steel
Benets
Fast, simple and safe installation
Tampering is visible
Long lasting connection
Ear clamps are commonly used where a minimal protrusion used for welding gas hoses. Also suitable for use with
and a small clamping range is essential. They are commonly rubber hoses, plastic tubing and electrical cables.
Ordering information
Product number Product name
768416 CLAMP.1 EAR 12,3-14,3MM 1/4"""" HOS
768440 CLAMP 1 EAR 17,1-20,0MM OD HOSE
768432 CLAMP.1 EAR 15,6-17,8MM 3/8"""" HOS
768457 CLAMP 1 EAR 22-24.8 MM 1/2 " HOSE
768481 CLAMP 1 EAR 26,5-30,0MM 3/4" HOSE
777971 CLAMP 1 EAR 29.3 - 34 MM 1" HOSE
91
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Grinders - Accessories, consumables & spares
PLASTIC P
PA
ADS F
FOOR A
AG
G-P
-PR
RO
Ordering information
Product number Product name
755900 PLASTIC PAD 4"" FOR AG-PRO 4B
755918 PLASTIC PAD 5"" FOR AG-PRO 5
755926 PLASTIC PAD 7"" FOR AG-PRO 7
GRIND
INDING
ING S
STTONE
NESSS
SEET 10 P
PCCS
401 536797
Quantity 10 -
Size 6 mm
92
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Grinders - Accessories, consumables & spares
CUTTING D
DIS
ISC
CS
Ordering information
Product number Product name
633515 CUTTING DISCS 100X2.5X16
633531 CUTTING DISCS 115X2.5X22
633547 CUTTING DISCS 125X3X22
633563 CUTTING DISCS 180X3X22
633579 CUTTING DISCS 230X3X22
CUTTING D
DIS
ISC
CS INO
INOX
X
Unitor high quality cutting and grinding wheels ensure a highest possible degree of efciency without
compromising on operator safety.
Features
Inox depressed wheels with soft bonding for use on stainless steel and high alloy stainless steel
The soft bonding also enables the Inox wheels to be used on aluminium
Iron free
Ordering information
Product number Product name
633595 CUTTING DISCS 125X2,5X22
633611 CUTTING DISCS 180X3X22
633627 CUTTING DISCS 230X3X22
93
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Grinders - Accessories, consumables & spares
GRIND
INDING
ING D
DIS
ISC
CS
The Unitor high quality cutting and grinding wheels ensure the highest possible degree of efciency
without compromising on operator safety.
Ordering information
Product number Product name
633523 GRINDING WHEELS, 4INCH, 10PCS
633539 GRINDING DISCS 115X6X22
633555 GRINDING WHEELS, 5INCH, 10PCS
633571 GRINDING WHEELS, 7INCH, 10PCS
633587 GRINDING DISCS 230X6X22
94
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Grinders - Accessories, consumables & spares
SAND
NDING
ING D
DIS
ISC
C
Features
Recognised by a low clogging rate
Even grinding nish
Ideal for applications requiring cool grinding
Ordering information
Product number Product name
692574 SANDING DISC 100MM, #24
692582 SANDING DISC 100MM, #36
692590 SANDING DISC 100MM, #50
633643 SANDING DISC 125MM, #24
633651 SANDING DISC 125MM, #36
633659 SANDING DISC 125MM, #50
633667 SANDING DISC 180MM, #24
633675 SANDING DISC 180MM, #36
633683 SANDING DISC 180MM, #50
95
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Grinders - Accessories, consumables & spares
MO
MOPPD
DIS
ISC
CS
Features
Recognised by a low clogging rate
Even grinding nish
Ideal for applications requiring cool grinding
Mop discs are made of abrasive coated aps fastened to a discs are made of alumina zirconia grain with resin bonding.
glass fabric backing plate. The even arrangement of the This combination is equally suitable for application on steels,
aps guarantees high exibility and constant high grinding stainless steel, aluminium, plastic, wood, etc.
performance over the tools complete service life. Unitor mop
Ordering information
Product number Product name
633691 MOP DISCS 100X16MM, #36
633699 MOP DISCS 100X16MM, #60
633707 MOP DISCS 100X16MM, #80
633715 MOP DISCS 125X22MM, #36
633723 MOP DISCS 125X22MM, #60
633731 MOP DISCS 125X22MM, #80
633739 MOP DISCS 180X22MM, #36
633747 MOP DISCS 180X22MM, #60
633755 MOP DISCS 180X22MM, #80
96
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Impact Wrenches - Accessories, consumables & spares
IMP
IMPA
ACT S
SOOCKET S
SEET
Ordering information
Product number Product name
728833 IMPACT SOCKET SET FOR IW-PRO 1/2"
728725 IMPACT SOCKET SET FOR IW-PRO 3/4"
728741 IMPACT SOCKET SET FOR IW-PRO 1"
97
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Scalers & Chipping - Accessories, consumables & spares
PIS
ISTTON R
REEPLACEME
MENT
NT K
KIT
IT
Ordering information
Product number Product name
722462 PISTON REPLACEMENT KIT FOR SH-PRO 3
722769 PISTON REPLACEMENT KIT FOR SH-PRO 1
NE
NEEEDLES F
FOOR NS
NS-P
-PR
RO S
SEERIE
IESS
Ordering information
Product number Product name
728758 NEEDLES 2MM FOR NS-PRO SERIES
728766 NEEDLES 3MM FOR NS-PRO SERIES
728774 NEEDLES 4MM FOR NS-PRO SERIES
98
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Scalers & Chipping - Accessories, consumables & spares
SCRAPER F
FOOR C
CSS-P
-PRRO 62 & 120
Ordering information
Product number Product name
728808 SCRAPER 40MM FOR CS-PRO 62 & 120
728816 SCRAPER 50MM FOR CS-PRO 62 & 120
728824 SCRAPER 70MM FOR CS-PRO 62 & 120
728832 SCRAPER 100MM FOR CS-PRO 62 & 120
CHIS
HISEEL S
SEET F
FOOR C
CH-P
H-PR
RO
Ordering information
Product number Product name
728782 CHISEL SET FOR CH-PRO 25
728790 CHISEL SET FOR CH-PRO 33
99
MA
MARRINE P
PRRODUCTS Air Tools accessories, consumables & spares
Quick Couplers - Spares
RUBBER P
PA
ACKING F
FOOR 20-
20-30-
30-40
40
405 323121
Spare packing for all USH, USM, USF, UPH, UPM and UPF 20, 30 and 40 series.
RUBBER P
PA
ACKING F
FOOR 400-
400-600
600
405 323139
Spare packing for all USH, USM, USF, UPH, UPM and UPF 400 and 600 series.
100
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!!/2+3)/015*0-&.460%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!!/2+3)/015*0-&.460%'9*%
93/52$&0"(&
MARINE PRODUCTS
WORKSHOP EQUIPMENT
UNIT
NITO
OR W
WIR
IRE
ERRO
OPE L
LU
UBRIC
ICAATOR U
UWWL77
482 728840
Features
Easy to use saves time and man-hours
Supplied with pump and hoses
Benets
Prolongs the life of a wire rope by up to 100%
Increases safety during wire lifetime
Technical data High pressure pump with ow control valve, drum cover,
ow control value, follower plate, 3 m of exible grease hose,
Connection size/type 1/4'' Unitor Lubricating chamber, 2 lengths of anchor chain.
Air consumption 0.38 m3/min Model UWL 77 - seals set for this model come in 15
Ratio 5:1 diameters at 3 mm intervals.
Inlet air pressure 7 - 8 bar Seals must be ordered separately.
Accessories
Product number Product name
729086 SEAL KIT FOR UWL77 - 34MM.
729087 SEAL KIT FOR UWL77 - 35MM
729088 SEAL.KIT FOR UWL77 - 38MM
729089 SEAL KIT FOR UWL77 - 41MM
729090 SEAL KIT FOR UWL77 - 44MM
729091 SEAL .KIT FOR UWL77 - 47MM
729092 SEAL .KIT FOR UWL77 - 50MM
729093 SEAL .KIT FOR UWL77 - 53MM
729094 SEAL .KIT FOR UWL77 - 56MM
729095 SEAL .KIT FOR UWL77 - 59MM
729096 SEAL .KIT FOR UWL77 - 62MM
729097 SEAL .KIT FOR UWL77 - 65MM
729098 SEAL .KIT FOR UWL77 - 68MM
729099 SEAL .KIT FOR UWL77 - 71MM
729100 SEAL .KIT FOR UWL77 - 74MM
Spares parts available for purchase:
728931 LUBRICATOR.CHAMBER FOR UMWL77
104
UNIT
NITO
OR W
WIR
IRE
ERRO
OPE L
LU
UBRIC
ICAATOR U
UWWL35
482 728980
Features
Easy to use saves time and man-hours
Supplied with pump and hoses
Benets
Prolongs the life of a wire rope by up to 100%
Increases safety during wire lifetime
Technical data High pressure pump with ow control valve, drum cover,
ow control value, follower plate, 3 m of exible grease hose,
Hose length 3m Unitor Lubricating chamber, 2 lengths of anchor chain.
Connection size/type 1/4'' Model UWL 35 - seals set for this model come in 17
Air consumption 0.38 m3/min diameters at 2 mm intervals.
Ratio 5:1 Seals must be ordered separately.
Inlet air pressure 7 - 8 bar
Accessories
Product number Product name
722587 SEAL KIT FOR UWL35 - 4MM
728998 SEAL KIT FOR UWL35 - 6MM
729004 .SEAL KIT FOR UWL35 - 8MM
729012 SEAL KIT FOR UWL35 - 10MM.
729020 SEAL KIT FOR UWL35 - 12MM
729038 SEAL.KIT FOR UWL35 - 14MM
729046 SEAL KIT FOR UWL35 - 16MM.
729053 SEAL KIT FOR UWL35 - 18MM
729061 SEAL KIT FOR UWL35 - 20MM.
729079 SEAL KIT FOR UWL35 - 22MM
729080 SEAL .KIT FOR UWL35 - 24MM
729081 SEAL KIT FOR UWL35 - 26MM
729082 SEAL .KIT FOR UWL35 - 28MM.
729083 SEAL KIT FOR UWL35 - 30MM
729084 SEAL KIT FOR UWL35 - 32MM
Spare parts available for purchase:
728881 LUBRICATOR.CHAMBER FOR UMWL35
105
MA
MARRINE P
PRRODUCTS Wire Lubricator
Wire Lubricators Accessories
LUBRIC
ICAATOR C
CHA
HAMB
MBEER F
FOOR U
UWWL35
482 728881
Spare part / replacement chamber for UWL 35. Only use original UWL pump with chamber.
LUBRIC
ICAATOR C
CHA
HAMB
MBEER F
FOOR U
UWWL77
482 728931
Spare part / replacement chamber for UWL77. Only use original UWL pump with chamber.
SEAL K
KIT
ITS
SFFO
OR U
UWWL35
A set of seals can lubricate approximately 9000 - 12000 ft (3000 - 4000 m) of wire rope.
Ordering information
Product number Product name
722587 SEAL KIT FOR UWL35 - 4MM
728998 SEAL KIT FOR UWL35 - 6MM
729004 .SEAL KIT FOR UWL35 - 8MM
729012 SEAL KIT FOR UWL35 - 10MM.
729020 SEAL KIT FOR UWL35 - 12MM
729038 SEAL.KIT FOR UWL35 - 14MM
729046 SEAL KIT FOR UWL35 - 16MM.
729053 SEAL KIT FOR UWL35 - 18MM
729061 SEAL KIT FOR UWL35 - 20MM.
729079 SEAL KIT FOR UWL35 - 22MM
729080 SEAL .KIT FOR UWL35 - 24MM
729081 SEAL KIT FOR UWL35 - 26MM
729082 SEAL .KIT FOR UWL35 - 28MM.
729083 SEAL KIT FOR UWL35 - 30MM
729084 SEAL KIT FOR UWL35 - 32MM
106
MA
MARRINE P
PRRODUCTS Wire Lubricator
Wire Lubricators Accessories
SEAL K
KIT
ITS
SFFO
OR U
UWWL 77
Ordering information
Product number Product name
729086 SEAL KIT FOR UWL77 - 34MM.
729087 SEAL KIT FOR UWL77 - 35MM
729088 SEAL.KIT FOR UWL77 - 38MM
729089 SEAL KIT FOR UWL77 - 41MM
729090 SEAL KIT FOR UWL77 - 44MM
729091 SEAL .KIT FOR UWL77 - 47MM
729092 SEAL .KIT FOR UWL77 - 50MM
729093 SEAL .KIT FOR UWL77 - 53MM
729094 SEAL .KIT FOR UWL77 - 56MM
729095 SEAL .KIT FOR UWL77 - 59MM
729096 SEAL .KIT FOR UWL77 - 62MM
729097 SEAL .KIT FOR UWL77 - 65MM
729098 SEAL .KIT FOR UWL77 - 68MM
729099 SEAL .KIT FOR UWL77 - 71MM
729100 SEAL .KIT FOR UWL77 - 74MM
107
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Working Lamps
LAMP C
CO
ORDLESS F
F//7.2-
2-12
12 V B
BAATTERIE
IESS
440 721795
Handy, high performance cordless professional lamp. Can be used with 7.2-9.6-12 V battery packs.
Solid design for use in MVI, lamp stands on battery pack. Practical folding design and battery not
included.
Benets
Handy and cordless
Lamps stand on battery pack
Can be folded
Technical data
108
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Saws & Cutters
CIR
IRCCULAR S
SAAW, 160 MM
440 721860
Ordering information
Supplied with:
Carbide-tipped 24 tooth saw blade
Parallel guide
Spanner
Chip director
109
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Saws & Cutters
JIG S
SAAW
440 721878
Ordering information
Supplied with:
Combined parallel guide
Circular guide
Saw blade
Plastic guide shoe
Anti-splintering device
Spanner
110
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Saws & Cutters
BENC
NCHHC
CUUTTER
440 615218
Ordering information
Supplied with:
Clamping device supplied as standard vice handle
2 clamping screws
M 14 transport safety device
Spanner
SW17/21
111
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Drills
BATTERY D
DRRIL
ILLL 12 V
440 721803
Ordering information
Supplied with:
13 mm keyless chuck
12 V / 2.0 Ah battery pack
RC charger (1 hour)
Carrying case
112
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Drills
DRIL
ILLL, C
CHU
HUC
CK S
SIZ
IZE
E 1-
1-10
10 MM
440 721894
Features
Heavy duty
50/60 Hz
Keyless chuck
Electronic: variable preselection of speed via switch
Benets
Excellent handling from a compact ergonomic design
with user comfort from soft-grip and broad switch
QUIK-LOK system provides a fast cable change for
replacement or extensions
Optimal speed range for up to 10 mm drilling
diameters in metal
Technical data
Ordering information
Supplied with:
Keyless chuck with retaining screw
QUIK-LOK cable, 4.1 m
113
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Drills
DRIL
ILLL, C
CHU
HUC
CK S
SIZ
IZE
E 3-
3-16
16 MM
440 721902
Features
Heavy duty with spade handle
230 V 50/60 Hz
Power and torque for hole diameter up to 50 mm in
steel/wood
Two-speed synchromesh gears can be shifted when
stationary and at no load speed
Spade handle for reliable control
Spindle with M18 x 2.5 thread
Three-jaw chuck 3-16 mm
Benets
Metal gearbox provides long service life
Hammer action can be switched off for drilling in wood, ceramics or metal providing wider range of use
Technical data
Ordering information
Supplied with:
Three-jaw chuck
Additional handle
Depth gauge
114
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Drills
PERCUSSIO
IONND
DRRIL
ILLLP
PDD2E 22 R
440 778001
Features
Fully insulated metal gearbox for long service life and
protection from electric shock
Hammer action stop for drilling in wood and metal
Lightweight, ergonomic front handle is fully
adjustable and can be securely xed in the best
position to suit the required drilling angle
High-quality keyless chuck
Two-speed synchromesh gears
Reversible action
Benets
AVS - Anti-Vibration System dramatically lowers the
level of vibration feedback to the user, and makes for more comfortable operation
Softgrip on rear handle for more comfortable operation
Safety clutch protects both the operator and the machine if the tool should block
Technical data
115
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Grinders
ANG
NGLLE G
GRRIND
INDEER 5", 10000 R
RPPM
440 721928
Features
230 V 50/60 Hz. 710 W, lightweight, slim and
compact
Flat compact gearhead design allows for optimised
cutting depth and longer grinding disk life
New patented ERGO-switch allows for instinctive
user control
Quick release safety guard
Motor casing with 90 adjustment for four switch
positions
Ideal for left hand use
Dust protection through labyrinth airow
Automatic cut-out carbon brushes
Benets
Ideal for working in awkward, difcult-to-reach places
Die-cast magnesium alloy gear casing provides lower vibration operation and long service life
Dust protected bearings and switch operated cooling fan keeps the motor cool even under heavy duty conditions
Safety spindle lock and patented FIXTEC ange nut with safety clutch saves valuable time when changing grinding
discs with no tools required
Technical data
Ordering information
Supplied with:
Grinding disc
Safety guard
Additional handle
Flange
FIXTEC ange nut
116
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Grinders
ANG
NGLLE G
GRRIND
INDEER 7", 8500 R
RPPM
440 721852
Features
High-performance angle grinder
Very favourable performance/weight ratio 1900 watt/
4.4 kg
Grinding disc diameter 180 mm with powerful 1900
watt motor
Quick release clamp on safety guard with no tools
required
Large-surface safety switch with lock function
prevents the machine from being started
unintentionally
Motor casing with 90 adjustment for four switch
positions- Ideal for left hand use
Additional handle can be xed in 3 different positions
Automatic cut-out carbon brushes
Benets
Extremely at metal gearhead for working in awkward, difcult-to-reach places
Die-cast magnesium alloy gear casing provides lower vibration operation and long service life
Patented spindle safety lock saves valuable time when changing discs, with only one key
Effective cooling fan keeps the motor cool even under heavy duty operation
Technical data
Ordering information
Supplied with:
Safety guard
Additional handle
Flange
Flange nut
Spanner
117
MA
MARRINE P
PRRODUCTS Electric & battery Tools
Grinders
ANG
NGLLE G
GRRIND
INDEER 9", 6600 R
RPPM
440 721886
Features
230 V 50/60 Hz
The power pack with the largest cutting depth for
particularly difcult cutting work grinding disc
Patented spindle lock saves valuable time when
changing discs, with only one key
Quick release clamp on safety with no tools required
Large-surface safety switch with lock function
prevents the machine from being started
unintentionally
Additional handle can be xed in 3 different positions
Benets
Die-cast magnesium alloy gear casing for low-vibration operation and long service life
Effective cooling fan keeps the motor cool even under heavy duty conditions Automatic cut-out carbon brushes
Extremely at metal gearhead ideal for working in awkward, difcult-to-reach places
Technical data
Ordering information
Supplied with:
Safety guard
Additional handle
Flange
Flange nut
Spanner
118
MA
MARRINE P
PRRODUCTS Accessories, consumables & Spares for Electric Tools
Drills
DRIL
ILLLB
BIT
IT S
SEET IMP
IMPEERIA
IALL - HIG
HIGHHS
SPPEED S
STTEEL
440 614005
Features
29 pieces - 1/16" to 1/2"
DIN 338 RN rollforged
Point angle 118
Technical data Sizes: 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64
7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64
Quantity 29 - 3/8 25/64 13/32 27/64 7/16 29/65 15/32 31/64 and 1/2
Size Inches
BATTERY NIC
NICDD 18 V
V//2.
2.0A
0A
440 721829
BATTERY C
CHA
HAR
RGER 7
7..2-
2-224 V
V//50-
50-60HZ
60HZ
440 721845
119
MA
MARRINE P
PRRODUCTS Hydraulic Equipment
Cutter
HY
HYDDRAULIC NU
NUTTS
SPPLIT
ITTTER
Features
Single acting
Unique angled head design
Single-acting, spring return cylinder
Heavy duty chisels can be reground
Nut splitters include a spare chisel, a spare set screw and the wrench used to secure the chisel
Benets
Easily removes rusty nuts
Compact and ergonomic design making it easy to use
Ordering information
Product number Product name
615049 HYD.NUT SPLITTER,M6-M12
615050 HYD.NUT SPLITTER,M12-M16
615051 HYD.NUT SPLITTER,M16-M22
615052 HYD.NUT SPLITTER,M22-M27
120
MA
MARRINE P
PRRODUCTS Hydraulic Equipment
Flange Spreader
HY
HYDDRAULIC F
FLLANG
NGEES
SPPREADER
441 615053
Features
Single acting
Adjustable jaw widths from 59 mm to 163 mm for a wide range of applications
Single-acting, spring return cylinders for fast trouble-free operation
Standard wedge 3-28 mm stroke 38 mm
Maximum operating pressure 700 bar
Benets
Light-weight, ergonomic design for ease of use
Technical data
121
MA
MARRINE P
PRRODUCTS Hydraulic Equipment
Pump & Cylinders
HY
HYDDRAULIC P
PUUMP C
CYYLIND
INDEER S
SEET
Features
Maximum versatility
The quickest and easiest way to start working right away
Optimum match of individual components
All sets are ready-for-use
All hand pumps are two-speed
Ordering information
Product number Product name
615001 HYD.PMP CYL.SET,10T
615002 HYD.PMP CYL.SET,15T
615003 HYD.PMP CYL.SET,25T
Supplied with:
1.8 m safety hose
Calibrated gauge with gauge adaptor plus cylinder and pump
122
MA
MARRINE P
PRRODUCTS Hydraulic Equipment
Pump & Cylinders
HY
HYDDRAULIC P
PUUMP L
LO
OW C
CYYL. S
SEET
Features
Ideal where space is restricted
The quickest and easiest way to start working right away
Optimum match of individual components
All sets are ready-for-use
All hand pumps are two-speed
Ordering information
Product number Product name
615004 HYD.PMP LOW CYL.SET,20T
615005 HYD.PMP LOW CYL.SET,30T
Supplied with:
1.8 m safety hose
Calibrated gauge with gauge adaptor plus cylinder pump
123
MA
MARRINE P
PRRODUCTS Hydraulic Equipment
Pump & Cylinders
HY
HYDDRAULIC C
CYYLIND
INDEER
Features
The industry standard general purpose cylinder
Collar threads, plunger threads and base mounting holes enable easy xturing (on most models)
Designed for use in all positions
High strength alloy steel for durability
Heavy duty return springs
Baked enamel nish for increased corrosion resistance
Ordering information
Product number Product name
615006 HYD.CYL,5T,110MM
615007 HYD.CYL,5T,165MM
615009 HYD.CYL,10T,121MM
615010 HYD.CYL,10T,171MM
615012 HYD.CYL,15T,149MM
615013 HYD.CYL,15T,200MM
615014 HYD.CYL,15T,271MM
615015 HYD.CYL,25T,165MM
615016 HYD.CYL,25T,215MM
696131 HYD.CYL,50T SINGLE-ACT STD.CYL.
124
MA
MARRINE P
PRRODUCTS Hydraulic Equipment
Pump & Cylinders
HY
HYDDRAULIC C
CYYLIND
INDEERS
Features
Compact, at design for use where most other cylinders will not t
Mounting holes enable easy xturing
Baked enamel nish for increased corrosion resistance
Coupler and dust cap included on all models
Hard chrome plated high quality steel plungers
Grooved plunger ends require no saddle
Ordering information
Product number Product name
615017 HYD.CYL,5T,32MM
615018 HYD.CYL,10T,42MM
615019 HYD.CYL,20T,51MM
615020 HYD.CYL,30T,58MM
696147 HYDRAULIC CYLINDER, 45T
HY
HYDDRAULIC P
PUUMP E
ELLECTRIC 230V
230VA
AC
441 615035
Features
Light-weight and compact design
Large easy-carry handle for maximum portability
Two-speed operation reduces cycle times for improved productivity
230 VAC 50/60-cycle universal motor will operate on voltages as low as 115 V
24 VDC remote motor control, 3 m length for operator safety
Starts under full load
Technical data
Weight 10 kg
125
MA
MARRINE P
PRRODUCTS Hydraulic Equipment
Pump & Cylinders
HY
HYDDRAULIC P
PUUMP
MP,, A
AIR
IR R
ROOPER, MA
MAXX7
700B
00BA
AR
441 615038
Features
Single acting
Easily operated by hand or foot
Turbo feature utilizes exhaust air to help power the pump, developing 700 bar hydraulic pressure with only 5,5 bar air
pressure
Patented air saver feature for lower air consumption and lower operating costs
Air exhaust mufer for quieter operation and reduce operator fatigue
return-to-tank port for use in remote valve applications
Air and oil inlet lters for reduced risk of damage from contamination
Extensive use of engineered plastics for light weight, corrosion resistance and durability
Internal pressure relief valve for overload protection
Technical data
Accessories
Product number Product name
615038 HYD.PMP,AIROPER,MAX700BAR
126
MA
MARRINE P
PRRODUCTS Hydraulic Equipment
Pump & Cylinders
HY
HYDDRAULIC C
CYYLIND
INDEER, 50T
441 696139
Features
Compact at design for use where most other cylinders will not t
Mounting holes enable easy xturing
Baked enamel nish for increased corrosion resistance
Coupler and dust cap included on all models
Hard chrome plated high quality steel plungers
Grooved plunger ends require no saddle
Technical data
Ordering information
Supplied with: Female quick coupling (socket)
127
MA
MARRINE P
PRRODUCTS Hydraulic Equipment
Pump & Cylinders
HY
HYDDRAULIC HA
HAND
ND P
PUUMP
MP,, MA
MAXX7
700
00 B
BAAR
441 615027
Features
Light-weight
Two-speed operation reduces handle strokes by as much as 78% over single speed pumps
Handle lock and light weight construction for easy carrying
Non-conductive berglass handle for operator safety
Lower handle effort to minimize operator fatigue
Durable glass-lled nylon reservoir and nylon encapsulated aluminium pump base for maximum corrosion resistance
Technical data
128
MA
MARRINE P
PRRODUCTS Accessories & Spares Hydraulic Equipment
Accessories for Hydraulic Equipment
GAUGE, HY
HYDDRAULIC
441 615037
For use with electric pump. Minimize the risk of overloading and ensure long, dependable service from
your equipment.
Technical data
REGULATOR-F
-FIL
ILT
TER-L
-LUUBE
441 615039
For turbo air hydraulic pump. Recommended for use with air pump.
Features
Provides clean, lubricated air
Allows for air pressure adjustment
Steel bowl guards are standard
Ordering information
Product number Product name
615038 HYD.PMP,AIROPER,MAX700BAR
129
MA
MARRINE P
PRRODUCTS Accessories & Spares Hydraulic Equipment
Accessories for Hydraulic Equipment
TENS
NSIO
ION
N ME
METTER, C
CAAP. 4.
4.55T
441 615040
Features
Direct mounted
Accuracy 2% of full scale
Zinc and bronze plated to resist corrosion
Dual-range readout in kilograms and pounds
Cushioned metal case provides safe storage and transport
Technical data
HY
HYDDRAULIC C
CUUTTER HE
HEAAD, C
CAAP. 20 T
441 615045
Features
Single-acting spring return
Guillotine action for easy operation
Lifting handle on large model for easy transport
Carrying bag included for easy carrying and tool protection
Technical data
CapacityTon 20
Length 279 mm
Oil capacity 134,4 cm3
Max cutting capacity 31 mm
Weight 11,3 kg
130
REPLACEME
MENT
NT B
BLLADE
441 615047
Ordering information
Product number Product name
615045 HYD.CUTTER HEAD,CAP.20T
HY
HYDDRAULIC HO
HOSSE F
FOOR HIG
HIGHHP
PRRESSURE
Hydraulic hose for high pressure. For cylinders used for demanding applications.
Features
4:1 design factor
Maximum working pressure of 700 bar
Four layer design, including two high strength steel wire braids
Outside jacket is polyurethane, to provide maximum abrasion resistance
Exhibits low volumetric expansion under pressure to enhance overall system efciency
Crimped-on rubber strain relief for improved life and durability.
Hose oil capacity
Ordering information
Product number Product name
615057 HYD. HOSE/HIGH PRES. 1,8M
615058 HYD. HOSE/HIGH PRES. 3,0M
HY
HYDDRAULIC C
COOUPLER
Type 1 - 3/8 high ow couplers C-604 Unitor standard equipment on most cylinders. Recommended
for use on all Unitor pumps and cylinders where space and porting permits. Includes "2-in-1" dust cap
for use on male and female coupler halves.
Ordering information
Product number Product name
615060 HYD. COUPLER COMPLETE SET
615061 HYD. COUPLER FEMALE HALF
615062 HYD. COUPLER MALE HALF
131
MA
MARRINE P
PRRODUCTS Accessories & Spares Hydraulic Equipment
Accessories for Hydraulic Equipment
FIT
ITTTING
INGSS-AADDAPTOR, HEHEXXAGON NIP
NIPP
PLE,
COUPLING
ING,, C
CRROSS, T
TEEE & R
REEDUCER
Ordering information
Product number Product name
615087 FITTING,ADAPT.G1/4-1/4
615088 FITTING,ADAPT.G1/4-1/8
615089 FITTING,ADAPT.G3/8-1/4
615090 FITTING,ADAPT.G3/8-3/8
615091 FITTING,ADAPT.M14X1,5-3/8
615092 FITTING,ADAPT.3/8-3/8
615093 FITTING,ADAPT.1/4-1/8
615094 FITTING,ADAPT.1/2-3/8
615074 FITTING,HEX.NIPPLE,38MM
615075 FITTING,HEX.NIPPLE,51MM
615077 FITTING,COUPLING,3/8-3/8
615079 FITTING,CROSS,3/8-3/8
615080 FITTING,TEE,3/8-3/8
615085 FITTING,REDUCER,1/4-1/2
615086 FITTING,REDUCER,3/8-G3/8
132
MA
MARRINE P
PRRODUCTS Accessories & Spares Hydraulic Equipment
Accessories for Hydraulic Equipment
GAUGE, HY
HYDDRAULIC P
PRRESSURE
Ordering information
Product number Product name
615095 GAUGE,HYD.PRES.0-700BAR
615102 GAUGE,HYD.PRES.0-7BAR
615103 GAUGE,HYD.PRES.0-11BAR
615104 GAUGE,HYD.PRES.0-13BAR
615105 GAUGE,HYD.PRES.0-20BAR
615106 GAUGE,HYD.PRES.0-40BAR
615107 GAUGE,HYD.PRES.0-70BAR
615108 GAUGE,HYD.PRES.0-140BAR
615109 GAUGE,HYD.PRES.0-200BAR
615110 GAUGE,HYD.PRES.0-400BAR
VALVE, F
FLLOW C
CO
ONT
NTR
ROL
All valves are rated for 700 bar operating pressure. All valves feature NPTF porting to insure against
leakage at rated pressure. All valves are painted, coated, or plated for corrosion resistance. To control
cylinder speed. Can also be used as shut-off valve for temporary load holding.
Ordering information
Product number Product name
615128 VALVE,FLOW CONTR.3/8NPTF
615129 VALVE,FLOW CONTR.1/4NPTF
133
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!,&".*.(15*0-&.460%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!,&".*.(15*0-&.460%'9*%
93/52$&0"(&
MARINE PRODUCTS
CLEANING EQUIPMENT
HIG
HIGHHP
PRRESSURE C
CLLEANING
136
Efcient paint removal thoroughly moistens dirt and other grime. During wash
Add a sand lance and a sand injector to a standard Unitor down, the proper detergent thoroughly dissolves the
cleaner and you have converted it to the most superior particles of dirt, including oil and fat, in the water spray and
instrument for removing rust or paint - a water sand blaster. thus achieves optimal cleaning results. In addition to being
On at or curved surfaces, there is no other method more more effective, the use of proper detergents substantially
efcient. reduces the time required for the cleaning operation, as well
as preventing dirt from reforming on the surface.
Thorough disinfection
3 Pieces of good advice
Another efcient use for the Unitor cleaner is to incorporate a
disinfecting foam which is sprayed onto surfaces and sticks Apply detergent on dry surfaces where possible. A
to them for up to 30 minutes. Its guaranteed to get into dry surface will absorb detergent far better than a wet
corners and behind shelves, leaving food storage rooms surface.
spotless. When applying detergent on vertical surfaces: start
application from the bottom and work upwards. By
The importance of detergents in high pressure beginning from the top and going downwards, the
cleaning detergent may produce channels down the surface,
and run off it too quickly.
High pressure cleaning efciency can be improved by using During high pressure cleaning, it is important that the
the correct detergents in correct dosages. Using a high rinsing water does not run over uncleaned surfaces.
pressure cleaner alone, without any detergent, will not The rinsing water can draw soap from the surface if
achieve optimal cleaning results. High-pressure cleaning running over non-cleaned surfaces. High pressure
primarily refers to cleaning of hard surfaces, such as decks, together with optimum concentration of detergent will
tanks, engine-rooms etc. and in the majority of cases, give the best effect. There are several Unitor
cleaning is done according to the two-step method: chemicals which are suitable for use together with
Step 1: Spray the detergent over the area to be cleaned Unitor high pressure cleaners. Detergent is mixed into
the water at a pre-set dosage through the cleaner's
Step 2: Wash down the area using a high pressure water jet chemical injector (built in or detachable).
After the detergent has been sprayed on the surface and
before the wash down begins, the detergent penetrates and
137
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
HP Cleaners 150 - 220 bar
HP C
CLLEANE
NERR HP
HPCC 30
30,, 1X
1X220
220 V
V//60 HZ
430 729327
Features
Axial pump
Stainless steel pistons
Chemical dosing
Benets
Light and compact - easy to transport
Fast to connect - saves time
Ideal for areas with limited space
Ergonomic design - improves work capabilitites
Ordering information
Supplied with: Quick couplings
10 m HP hose
Tornado lance
Spray handle 3000
138
Accessories
Product number Product name
662197 DOUBLE LANCE 200CM WITH 05 NOZZLE
621813 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718601 NOZZLE 05/0DGR. F/EXTENDABLE LANCE
718585 NOZZLE 05/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
662213 ROTARY BRUSH 170CM WITH 05 NOZZLE
662205 ROTARY BRUSH 80CM WITH 05 NOZZLE
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
659110 TORNADO LANCE 92CM WITH 06 NOZZLE
662155 TORNADO LANCE 10CM WITH 05 NOZZLE
662189 UNIVERSAL 3000 LANCE 05 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
Approvals
CE
139
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
HP Cleaners 150 - 220 bar
HP C
CLLEANE
NERR HP
HPCC54 200 B
BAAR, 3X
3X220-
220-380
380 V
V//50 HZ
430 662247
Features
Robust unit
Low RPM for reduced noise and longer life span
Dual voltage - changeable by switch
3 ceramic piston pump ensures smooth and
problem-free use
Benets
Economic, all purpose high pressure cleaner
Effectively removes dirt
Compact and easy to store
Solves smaller cleaning jobs with ease
Technical data 2 sturdy wheels the unit is stable and easy to move due
to its size of wheels.
Electric cycles 60 Hz New plunger pump the unit is based on a new type
Pressure 200 bar pump operating at 1450 RPM. This gives the unit a longer
Voltage 400 V life span and reduces the noise.
Ceramic pistons - ensure smooth and problem free use
Inlet temperature 60 C
and prolong the lifetime of the unit. Induction motor ensures
Water ow 1030 l/h longer lifespan.
Fully enclosed oil system ensures stable quality of the
Chassis and frame in steel robust unit, resistant to lubricant and contamination free operation.
shock and vibration, the frame protects the motor pump Patented ow regulation the unit can be adjusted to suit
from accidental damage. all applications according to the task and material being
Steel lifting grips some strategic parts of the frame are cleaned.
not covered by the shell, this makes the unit easier to lift and Brass pump brass pump housing ensures longer lifetime.
carry. Built in chemical injector simplies cleaning operations
and increases the units cleaning efciency.
140
Ordering information
Supplied with: Quick couplings
10 m HP hose
Universal 3000 lance
Spray handle 3000
Accessories
Product number Product name
545319 CHEM. INJECTOR DETACHABLE
662197 DOUBLE LANCE 200CM WITH 05 NOZZLE
621813 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718601 NOZZLE 05/0DGR. F/EXTENDABLE LANCE
718585 NOZZLE 05/25DGR. F/EXTENDABLE LANCE
662213 ROTARY BRUSH 170CM WITH 05 NOZZLE
662205 ROTARY BRUSH 80CM WITH 05 NOZZLE
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
659110 TORNADO LANCE 92CM WITH 06 NOZZLE
662155 TORNADO LANCE 10CM WITH 05 NOZZLE
662189 UNIVERSAL 3000 LANCE 05 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
545640 SUCTION HOSE&ROD F/VSB300
546044 WASHING BRUSH 235CM LONG
Approvals
CE
141
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
HP Cleaners 150 - 220 bar
HP C
CLLEANE
NERR HP
HPCC54 200 B
BAAR, 3X
3X220-
220-440
440 V
V// 60 HZ
430 662239
Features
Robust unit
Low RPM for reduced noise and longer life span
Dual voltage - changeable by switch
3 ceramic piston pump to ensure smooth and
problem-free use
Benets
Economic all purpose high pressure cleaner
Effectively removes dirt
Compact and easy to store
Solves smaller cleaning jobs with ease
Technical data 2 sturdy wheels the unit is stable and easy to move due
to its size of wheels.
Pressure 200 bar New plunger pump the unit is based on a new type
Water ow 1030 l/h pump operating at 1450 RPM. This gives the unit a longer
Inlet temperature 60 C life span and reduces the noise.
Ceramic pistons- ensure smooth and problem free use
Voltage 440-220 V
and prolong the lifetime of the unit. Induction motor ensure
Electric cycles 60 Hz longer lifespan.
Fully enclosed oil system ensures stable quality of the
Chassis and frame in steel robust unit, resistant to lubricant and contamination free operation.
shock and vibration, the frame protects the motor pump Patented ow regulation the unit can be adjusted to suit
from accidental damage. all applications according to the task and material being
Steel lifting grips some strategic parts of the frame are cleaned.
not covered by the shell, this makes the unit easier to lift and Brass pump brass pump housing ensures longer lifetime.
carry. Built in chemical injector simplies cleaning operations
and increases the units cleaning efciency.
142
Ordering information
Supplied with: Quick couplings
10 m HP hose
Universal 3000 lance
Spray handle 3000
Accessories
Product number Product name
545319 CHEM. INJECTOR DETACHABLE
662197 DOUBLE LANCE 200CM WITH 05 NOZZLE
621813 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718601 NOZZLE 05/0DGR. F/EXTENDABLE LANCE
718585 NOZZLE 05/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
662213 ROTARY BRUSH 170CM WITH 05 NOZZLE
662205 ROTARY BRUSH 80CM WITH 05 NOZZLE
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
659110 TORNADO LANCE 92CM WITH 06 NOZZLE
662155 TORNADO LANCE 10CM WITH 05 NOZZLE
662189 UNIVERSAL 3000 LANCE 05 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
Approvals
CE
143
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
HP Cleaners 150 - 220 bar
HP C
CLLEANE
NERR HP
HPCC62 220 B
BAAR, 220-
220-440
440 V
V//60 HZ
430 659136
The HP62 high pressure cleaner is specically suited to cold water cleaning on board. High
performance, unbeatable ergonomics, low noise levels and easy servicing.
Features
Robust unit
Low RPM for reduced noise and longer lifespan
Dual voltage - changeable by switch
3 ceramic piston pump ensures smooth and problem free use
Benets
Economic all purpose high pressure cleaner
Effectively removes dirt
Compact and easy to store
Ideally suited to small cleaning tasks
Technical data Ceramic pistons - ensure smooth and problem free use
and prolong the lifetime of the unit.
Pressure 220 bar Induction motor ensures longer lifespan.
Water ow 1130 l/h Fully enclosed oil system ensures contamination-free
Inlet temperature 60 C operation and stable quality of the lubricant.
Patented ow regulation the unit can be adjusted to suit
Voltage 440-220 V
all applications according to the task and material being
Electric cycles 60 Hz cleaned.
Brass pump & brass pump housing ensure longer
Chassis and frame of steel robust unit, resistant to lifetime
shock and vibration, the frame protects the motor pump Built in chemical injector simplies cleaning operations
from accidental damage. and increases the units cleaning efciency.
Steel lifting grips - make the unit easier to lift and carry.
2 sturdy wheels the unit is stable and easy to move due
to its size of wheels.
Ordering information
Supplied with: Quick couplings
10 m HP hose
Tornado lance
Spray handle 3000
144
Accessories
Product number Product name
545327 CHEM. INJECTOR DETACHABLE
546150 DOUBLE LANCE 2OOCM LONG
621821 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718593 NOZZLE 06/0DGR. F/EXTENDABLE LANCE
718577 NOZZLE 06/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
545277 ROTARY BRUSH 170CM LONG
545251 ROTARY BRUSH 80CM LONG
565853 LANCE F/VSB 300 03K
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
545640 SUCTION HOSE&ROD F/VSB300
662163 TORNADO LANCE 92CM WITH 05 NOZZLE
545434 DOUBLE LANCE 10CM LONG
682070 UNIVERSAL.3000 LANCE 06 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
546044 WASHING BRUSH 235CM LONG
Approvals
CE
145
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
HP Cleaners 150 - 220 bar
HP C
CLLEANE
NERR HP
HPCC66 190 B
BAAR, 3X
3X220-
220-440
440 V
V//60 HZ
430 652586
Features
Dual voltage - changeable by switch
High mobility and ergonomic design
4 ceramic piston pump ensures longer life of the
unit
Up to 85 C inlet water
Benets
Effectively removes intense dirt
Reduces cleaning time
Reduces water consumption
Designed for intense applications over 8 hours, every day
Technical data High pressure and high water volume efcient and
quick cleaning, optimal solution for incrusted dirt and scale
Pressure 190 combined with high ushing effect for loose water.
Water ow 1280 l/h Up to 85 C inlet water makes it possible to handle the
Inlet temperature 85 C most demanding cleaning tasks, ideal for cleaning grease
and oil residue.
Voltage 440-220 V
Hose hook on the handle enhanced mobility with easy
Electric cycles 60 Hz storage of hose and power supply cable.
Lance holder two built in holders protect the lances from
Chassis and frame in steel robust unit, resistant to damage when in transport or storage, makes lance changes
shock and vibration, the frame protects the motor pump easy.
from accidental damage. 3 step start/stop possibility of using the unit with an
4 ceramic piston pump ensures longer life of the unit, automatic or a manual start stop, the manual option is ideal
designed for intense applications over 8 hour every day. when using a suction hose from a tank. The automatic stop
Induction motor ensure longer lifespan. setting will turn the pump off after 20 seconds of inactivity.
It is tted with a brake on the front wheel.
146
Ordering information
Supplied with: 8 m electric cable (without socket).
Tornado lance The water inlet quick coupling with a 3/4" hose socket is
Spray handle 3000 supplied, hence the only thing not included to operate the
Quick coupling machine is the 3/4" inlet hose.
10 m HP hose
Accessories
Product number Product name
545327 CHEM. INJECTOR DETACHABLE
671792 HEAVY DUTY DECK HOSE 25M
546150 DOUBLE LANCE 2OOCM LONG
621821 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718593 NOZZLE 06/0DGR. F/EXTENDABLE LANCE
718577 NOZZLE 06/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
545277 ROTARY BRUSH 170CM LONG
545251 ROTARY BRUSH 80CM LONG
658237 SAND FILTER COMPLETE FOR HPC66
565853 LANCE F/VSB 300 03K
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
545640 SUCTION HOSE&ROD F/VSB300
662163 TORNADO LANCE 92CM WITH 05 NOZZLE
545434 DOUBLE LANCE 10CM LONG
682070 UNIVERSAL.3000 LANCE 06 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
546044 WASHING BRUSH 235CM LONG
Approvals
CE
147
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
HP Cleaners 150 - 220 bar
HP C
CLLEANE
NERR HP
HPCC66 190 B
BAAR, 3X
3X220-
220-380
380 V
V//50 HZ
430 652594
Features
Low RPM
High mobility and ergonomic design
4 ceramic piston pump ensures longer life of the
unit
Up to 85 C inlet water
Ordering information
Supplied with: 8 m electric cable (without socket)
Tornado lance The water inlet quick coupling with a 3/4" hose socket is
Spray handle 3000 supplied, hence the only thing not included to operate the
Quick coupling machine is the 3/4" inlet hose.
10 m HP hose
Approvals
CE
148
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
DECK HO
HOSSE L
LO
OW F
FRRIC
ICTTIO
IONN 25 M
436 671792
Features
The hose is tailor-made to reduce friction on the
hose by drag and wear
Benets
With the low friction hose your hoses will last longer
due to less drag and wear
Fits all models from HPC 30 until HPC 66 (not air driven).
149
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
HE
HEAAVY D
DUUTY HO
HOSSE 10 M
436 586776
Benets
The hose is exible and therefore easy for you to use
when cleaning
Technical data Fits all high pressure cleaners from HPC 30 to HPC 66. Not
suitable for Airdriven or HPC Extreme.
ID in 3/8
Internal hose: Synthetic rubber, extruded whole joints, of
ID mm 9,5
uniform thickness
OD mm 15,6
Reinforcement: 1 high tensile steel wire braids
Max WP 250 bar
External covering: Anti-abrasive synthetic rubber, resistant to
Min BP 625 bar
oils, fuels and atmospheric condtions
Min BR 90 mm
Operating temperature range: from +5C to 135C / 155
Weight (approx) 0,256 kg/m intermittently
Approvals
Exceeds EN 857 1SC - ISO 7751
150
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
HE
HEAAVY D
DUUTY HO
HOSSE 15 M
436 586792
Benets
The hose is exible and easy to use when cleaning
Technical data Fits all high pressure cleaners from HPC 30 to HPC 66. Not
suitable for Airdriven or HPC Extreme.
ID in 3/8
Internal hose: Synthetic rubber, extruded whole joints, of
ID mm 9,5
uniform thickness
OD mm 15,6
Reinforcement: 1 high tensile steel wire braids
Max WP 250 bar
External covering: Anti-abrasive synthetic rubber, resistant to
Min BP 625 bar
oils, fuels and atmospheric condtions
Min BR 90 mm
Operating temperature range: from +5 C to 135 C / 155
Weight (approx) 0,256 kg/m intermittently
Approvals
Exceeds EN 857 1SC - ISO 7751
151
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
HE
HEAAVY D
DUUTY HO
HOSSE 25 M
436 586784
Benets
The hose is exible and easy to use when cleaning
Technical data Fits all high pressure cleaners from HPC 30 to HPC 66. Not
suitable for Airdriven or HPC Extreme.
ID in 3/8
Internal hose: Synthetic rubber, extruded whole joints, of
ID mm 9,5
uniform thickness
OD mm 15,6
Reinforcement: 1 high tensile steel wire braids
Max WP 250 bar
External covering: Anti-abrasive synthetic rubber, resistant to
Min BP 625 bar
oils, fuels and atmospheric condtions
Min BR 90 mm
Operating temperature range: from +5C to 135C / 155
Weight (approx) 0,256 kg/m intermittently
Approvals
Exceed EN 857 1SC - ISO 7751
152
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
NO
NONNB
BLLACKENING HO
HOSSE 10 M
436 671800
Features
Max 155 C
Max working pressure 250 bar
Burst pressure 650 bar
Non-blackening
Benets
Ideal for hot (up to 155 C) and cold water
Ideal for working pressure up to 250 bar
No blackening of surfaces from hose
Fits all high pressure cleaners from HPC 30 to HPC 66. Not
Technical data suitable for Airdriven or HPC Extreme.
Internal hose: Synthetic rubber, extruded whole joints, of
ID in 3/8 uniform thickness
ID mm 9,5
Reinforcement: 1 high tensile steel wire braids
OD mm 15,6
External covering: Anti-abrasive synthetic rubber, resistant to
Max WP 250 bar
oils, fuels and atmospheric condtions
Min BP 625 bar
Operating temperature range: from +5 C to 135 C / 155
Min BR 90 mm intermittently
Weight (approx) 0,256 kg/m
Approvals
Exceeds EN 857 1SC - ISO 7751
153
NO
NONNB
BLLACKENING HO
HOSSE 25 M
436 671818
Features
Max 155 C
Max working pressure 250 bar
Burst pressure 650 bar
Non-blackening
Benets
No blackening of your surfaces from the hose
Ideal for hot (up to 155 C) and cold water
The hose is exible and therefore easy for you to use when cleaning
Fits all high pressure cleaners from HPC 30 to HPC 66. Not
Technical data suitable for Airdriven or HPC Extreme.
Fits all high pressure cleaners from HPC 30 to HPC 66. Not
ID in 3/8 suitable for Airdriven or HPC Extreme.
ID mm 9,5
Internal hose: Synthetic rubber, extruded whole joints, of
OD mm 15,6 uniform thickness
Max WP 250 bar
Reinforcement: 1 high tensile steel wire braids
Min BP 625 bar
External covering: Anti-abrasive synthetic rubber, resistant to
Min BR 90 mm oils, fuels and atmospheric condtions
Weight (approx) 0,256 kg/m
Operating temperature range: from +5 C to 135 C / 155
intermittently
Approvals
Exceed EN 857 1SC - ISO 7751
154
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
CHE
HEMIC
MICA
AL INJ
INJEECTOR
436 545319
DOUBLE L
LAANC
NCEE 200 C
CMM
436 546150
Technical data The accessories are tailor-made to suit the individual pumps.
Use the model number to identify the correct accessories.
Length: 2000 mm
Width: 100 mm
Height: 100 mm
Weight: 5 kg
155
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
DRAIN C
CLLEANE
NERRC
COOMP
MPLLETE K
KIT
IT W
WIT
ITH
H 20 M HO
HOSSE
436 621813
FOAM INJ
INJEECTOR
436 545335
Features
Creates rich foam
Regulator for chemical dosing
Benets
Allows foam to stick to vertical surfaces more easily
Allows the operator to idenitfy areas where chemicals have been applied
156
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
FOAM L
LAANC
NCEE
436 545343
Features
Ergonomic
Creates rich foam
Benets
Enables foam to stick easily to vertical surfaces
Allows the operator to easily identify where chemicals
have been applied
HO
HOSSE Q
QUUIC
ICKKC
COOUPLING S
SEET
436 546036
Technical data The accessories are tailor-made to suit the individual pumps.
Use the model number to identify the correct accessories.
Length: 50 mm
Diameter: 50 mm
157
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
HP E
EXXTEND
NDA
ABLE L
LAANC
NCEE 5.
5.55M
436 659151
The lance has 3 telescopic tubes which, when extended, and the smallest 2:1 chemical pumps as well as the high
slide out to a full length of 5.5 m. Inside the sliding tubes the pressure cleaners.
uid is transported using a 3/8" hose which starts at the
trigger and exits at the end of the lance in a quick connector. Typical set up
The quick connector enables rapid changing of the nozzle
according to the task at hand; 25 for high volume or 0 for Pump > Hose quick connector M & F > Heavy duty hose >
spot cleaning. The lance can be used with both the 10:1 Hose quick connector F & M > 5.5 m lance > 25 nozzle
NO
NOZ
ZZLE 06
06/25
/25 F
FOOR E
EXXTEND
NDA
ABLE L
LAANC
NCEE
436 718577
Nozzle 06/25 for extendable lance. Nozze for use with Unitor HPC 66, HPC 62, HPCH 53 and
stationary systems.
158
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
STAINL
INLEESS S
STTEEL C
CLLEANING T
TRROLLEY
436 577379
ROTARY B
BRRUSH 80 C
CMM
436 545251
159
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
ROTARY B
BRRUSH 17
170
0CCM
M
436 545277
SPRAY HA
HAND
NDL
LE 3000
436 665158
160
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
TORNA
NADDO S
SHO
HOR
RT L
LAANC
NCEE 10 C
CMM
436 545434
TORNA
NADDO NO
NORRMA
MALLL
LAANC
NCEE9
922C
CMM
436 636159
161
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
POWERSPEED L
LAANC
NCEE
436 659128
TORNA
NADDO NO
NORRMA
MALLL
LAANC
NCEE 104 C
CMM
436 662163
162
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
NO
NOZ
ZZLE 05
05/25
/25 D
DEEGREE F
FOOR E
EXXTEND
NDA
ABLE L
LAANC
NCEE
436 718585
NO
NOZ
ZZLE 06
06//0 D
DEEGREE F
FOOR E
EXXTAND
NDA
ABLE L
LAANC
NCEE
436 718593
For use with Unitor HPC 66, HPC 62, HPCH 53 and stationary systems.
NO
NOZ
ZZLE 05
05//0 D
DEEGREE F
FOOR E
EXXTEND
NDA
ABLE L
LAANC
NCEE
436 718601
163
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares/Accessories - Cold Water HP Cleaners 150 - 220
UNIV
NIVEERSAL 3000 L
LAANC
NCEE
436 662189
WASHING B
BRRUSH 23
2355C
CMM
436 546044
164
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Hot Water HP Cleaners
HP C
CLLEANE
NERR HP
HPCCH5
H533 HW
HW,, 200 B
BAAR 60 HZ
430 665174
The Unitor HPCH53 is a high-pressure cleaner with electric motor and diesel burner to deliver constant
hot water. Cleaning with hot water can reduce both chemical consumption and cleaning time
signicantly.
Features
Chassis and frame in steel
Broad large rubber wheels and brakes on rear wheel
4 ceramic piston pump unit runs on 1450 RPM
Eco power boiler system designed to be clean and fuel efcient -compliant with EN303-2 directive
Built-in detergent tank and an internal injector
Information and control panel all functions and service information displayed
Benets
Mobile and robust unit, resistant to shock and vibration
Easy and quick to service
Longer lifespan and lower noise emission
Reduction in cleaning time and use of chemicals
Reduced emissions
Easy to transport and operate
Technical data
Ordering information
Supplied with: Quick couplings
10 m H.P.hose
Tornado lance
Spray handle 3000
165
Accessories
Product number Product name
545327 CHEM. INJECTOR DETACHABLE
546150 DOUBLE LANCE 2OOCM LONG
621821 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718593 NOZZLE 06/0DGR. F/EXTENDABLE LANCE
718577 NOZZLE 06/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
545277 ROTARY BRUSH 170CM LONG
545251 ROTARY BRUSH 80CM LONG
565853 LANCE F/VSB 300 03K
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
545640 SUCTION HOSE&ROD F/VSB300
662163 TORNADO LANCE 92CM WITH 05 NOZZLE
545434 DOUBLE LANCE 10CM LONG
682070 UNIVERSAL.3000 LANCE 06 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
546044 WASHING BRUSH 235CM LONG
166
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares & Accessories for Hot HP Cleaners
ROTARY B
BRRUSH 80 C
CMM
436 545251
REPAIR K
KIT
IT S
SAAFETY V
VA
ALVE HP
HPCCH5
H53&
3&S
SOLAR
436 709931
REPAIR K
KIT
IT B
BY
YPASS V
VA
ALVE F
FOOR HP
HPCCH5
H533
436 709949
167
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
HP Cleaners 300 - 500 bar
HP C
CLLEANE
NERR HP
HPCCE330 310 B
BAAR, 3X
3X440
440/60
/60 HZ
437 720987
Features
Four wheels with break the units can be moved
with ease and can be stored safely
Built-in inlet lter protects the pump from damage
Well proven pump the pump design is based on years of experience and development
Ordering information
Supplied with: Sand lter, 1O meter HP hose, spray handle
and lance.
Accessories
Product number Product name
721365 EXTREME HIGH PRESSURE HOSE 10M
721381 EXTREME HIGH PRESSURE HOSE 25M
721183 POWERSPEED ROTARY NZZL EXTREME 330
721167 SANDBLASTING EXTREME PACK 330 - 405
729229 REP.KIT SEALS FOR HPC EXTREME 330
729228 REP.KIT VALVES FOR HPC EXTREME 330
Approvals
CE
168
HP C
CLLEANE
NERR HP
HPCCE405 385 B
BAAR, 3X
3X440
440 V
V//60 HZ
437 721001
Features
Four wheels with brake the units can be moved with
ease and can be stored safely
Built-in inlet lter protects the pump from damage
Well proven pump the pump design is based on
years of experience and development
Ordering information
Supplied with: Sand lter, 10 meter HP hose, spray handle
and lance.
Accessories
Product number Product name
721365 EXTREME HIGH PRESSURE HOSE 10M
721381 EXTREME HIGH PRESSURE HOSE 25M
721191 POWERSPEED ROTARY NZZL EXTREME 405
721167 SANDBLASTING EXTREME PACK 330 - 405
729233 REP KIT VALVES FOR HPC EXTREME 405
728923 REP.KIT FOR POWERSPEED FOR HPCE 405
Approvals
CE
169
HP C
CLLEANE
NERR HP
HPCCE520 500 B
BAAR, 3X
3X440
440 V
V//60 HZ
437 721035
Features
Four wheels with brake the units can be moved
with ease and can be stored safely
Built-in inlet lter protects the pump from damage
Well proven pump the pump design is based on years of experience and development
Ordering information
Supplied with: Sand lter, 10 meter HP hose, spray handle
and lance.
Accessories
Product number Product name
721365 EXTREME HIGH PRESSURE HOSE 10M
721381 EXTREME HIGH PRESSURE HOSE 25M
721209 POWERSPEED ROTARY NZZL EXTREME 520
721175 SANDBLASTING EXTREME PACK 520
729239 REP.KIT SEALS FOR HPC EXTREME 520
728915 REP.KIT FOR POWERSPEED FOR HPCE 520
Approvals
CE
170
HP CCL
LEANE
NERR HP
HPCCE520 HIG
HIGHHF
FLLOW 500 B
BAAR,
3X
3X440V
440V/60
/60 HZ
437 721068
The HPCE 520 High Flow is a power back and a heavy duty high pressure cleaner. It removes dirt and
rust quickly and efciently. Ideal for thougest jobs on board. Low RPM motor and heavy duty unit
constructed for the thougest cleaning and surface application. Heavy duty steel frame protects the unit
and enables lifting with a crane.
Features
Four wheels with brake the units can be moved with ease and can be stored safely
Built-in inlet lter protects the pump from damage
Well proven pump the pump design is based on years of experience and development
Ordering information
Supplied with: Sand lter, 10 meter HP hose, spray handle
and lance.
Accessories
Product number Product name
721365 EXTREME HIGH PRESSURE HOSE 10M
721381 EXTREME HIGH PRESSURE HOSE 25M
Approvals
CE
171
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Air Driven HP Cleaners
HP
HPCCA
AIR
IRC
CLEAN 25
434 734087
Features
Supplied ready for use including lubricator, hose,
handle and lance
Light-weight and easy to set up can be moved with
ease
Can be used with hot water, speeding up the
cleaning process
Simple and robust air motor for easy maintenance
and long operating lifeboosters
Ordering information
Supplied with: 10 meter hose, spray handle, single lance
including nozzle, air lubricator and exhaust air mufer.
Accessories
Product number Product name
191965 600 UPF PLUG 3/4'' FEMALE BSP.T
729178 HOSE 15M FOR HPC AIRCLEAN 25 & 32
729194 HOSE 25M FOR HPC AIRCLEAN 25 & 32
721945 LANCE 1.5M FOR HPC AIRCLEAN 25 & 32
722223 LANCE 2,5M FOR HPC AIRCLEAN 25 & 32
Approvals
CE, EX GD
172
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Air Driven HP Cleaners
HP
HPCCA
AIR
IRC
CLEAN 32
434 734095
Features
Supplied ready for use including lubricator, hose,
handle and lance
Light-weight and easy to set up can be moved with
ease
Can be used with hot water, speeding up the
cleaning process
Simple and robust air motor for easy maintenance
and long operating lifeboosters
Water pressure (at 8 bar air pressure) 256 bar Durable and long lasting
Water ow 1440 l/h Can be used in explosive areas
Air consumption 3,1 - 7,5 m3/min
Unitor's series of air-driven high-pressure cleaners include
Ratio 32:1 some of the most advanced air-driven units on the market.
Hose length 10 m The machines are developed in cooperation with shipping
and offshore customers. They are reliable and can withstand
the rigorous demands of the marine environment.
Ordering information
Supplied with: 10 meter hose, spray handle, single lance
including nozzle, air lubricator and exhaust air mufer.
Accessories
Product number Product name
191965 600 UPF PLUG 3/4'' FEMALE BSP.T
729178 HOSE 15M FOR HPC AIRCLEAN 25 & 32
729194 HOSE 25M FOR HPC AIRCLEAN 25 & 32
721945 LANCE 1.5M FOR HPC AIRCLEAN 25 & 32
722223 LANCE 2,5M FOR HPC AIRCLEAN 25 & 32
Approvals
CE, EX GD
173
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Air Driven HP Cleaners
HP
HPCCA
AIR
IRC
CLEAN 48
434 734103
Features
Supplied ready for use including lubricator, hose,
handle and lance
Light-weight and easy to set up and move
Can be used with hot water, speeding up the
cleaning process
Simple and robust air motor for easy maintenance
and long operating lifeboosters
Ordering information
Supplied with: 10 meter hose, spray handle, single lance
including nozzle, air lubricator and exhaust air mufer.
Accessories
Product number Product name
191965 600 UPF PLUG 3/4'' FEMALE BSP.T
729186 HOSE 15M FOR HPC AIRCLEAN 48
729202 HOSE 25M FOR HPC AIRCLEAN 48
722231 LANCE 1,5M FOR HPC AIRCLEAN 48
722215 LANCE 2,5M FOR HPC AIRCLEAN 48
Approvals
CE, EX GD
174
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares & Accessories for HP Cleaners 300 - 500 bar
POWERSPEED A
AT
TTACHME
HMENT
NT,, HP
HPCCE330
436 721183
SAND
NDBBLASTING P
PA
ACK, HP
HPCCE330 A
AND
ND 405
436 721167
175
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares & Accessories for HP Cleaners 300 - 500 bar
POWERSPEED A
AT
TTACHME
HMENT
NT,, HP
HPCCE520
436 721209
SAND
NDBBLASTING P
PA
ACK, HP
HPCCE520
436 721175
176
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares & Accessories for HP Cleaners 300 - 500 bar
WATER F
FIL
ILT
TER INS
INSEERT E
EXXTREME
436 721142
EXTREME HIG
HIGHHP
PRRESSURE HO
HOSSE - 10 M
436 721365
Features
From + 5 to + 135 / 155 C intermittently
Maximum working pressure 500 bar
Approvals
Exceeds EN 857 1SC - ISO 7751
177
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares & Accessories for HP Cleaners 300 - 500 bar
EXTREME HIG
HIGHHP
PRRESSURE HO
HOSSE - 25 M
436 721381
Features
From + 5 to + 135 / 155 C intermittently
Maximum working pressure 500 bar
Technical data
Approvals
Exceeds EN 857 1SC - ISO 7751
178
MA
MARRINE P
PRRODUCTS Mobile High Pressure Cleaners
Spares & Accessories for Air Driven HP Cleaners
SING
INGLLE L
LAANC
NCEE HP
HPCCA
AIR
IRC
CLEAN
Ordering information
Product number Product name
721945 LANCE 1.5M FOR HPC AIRCLEAN 25 & 32
722215 LANCE 2,5M FOR HPC AIRCLEAN 48
722223 LANCE 2,5M FOR HPC AIRCLEAN 25 & 32
722231 LANCE 1,5M FOR HPC AIRCLEAN 48
HIG
HIGHHP
PRRESSURE HO
HOSSE, HP
HPCCA
AIR
IRC
CLEAN
Ordering information
Product number Product name
729178 HOSE 15M FOR HPC AIRCLEAN 25 & 32
729186 HOSE 15M FOR HPC AIRCLEAN 48
729194 HOSE 25M FOR HPC AIRCLEAN 25 & 32
729202 HOSE 25M FOR HPC AIRCLEAN 48
179
MA
MARRINE P
PRRODUCTS Stationary High Pressure Systems
Stationary Cold Water Cleaners
DUO B
BOOOSTER 3X
3X440
440 V 60 HZ 160 B
BAAR
435 597146
Twin pump stationary cold water pressure washers for use by up to two users simultaneously.
Features
Small and compact easily to x to the bulkhead or deck
Inlet water temp 70 C ideal for use with pre-heated water in order to obtain an increased cleaning effect
4 ceramic piston pump long life pumps for intense applications over 8 hours per day
Lowered pressure output the pump pressure has been reduced to 160 bar in order to lower the service
requirements and wear and tear
With the right equipment, one single user can obtain the output of both pumps for heavy ushing and rinsing
applications
Benets
2 pump system (Duo Booster) with electronic control enables selection of one or two users simultaneously
Stainless steel design for added hygiene and protection against corrosion
High level of serviceability
Built-in water tank ensures trouble-free water supply
Technical data The Unitor Duo Booster is a 2-pump model for heavy
cleaning applications with 1 or 2 users at same time. The
Pressure 160 bar stainless steel design ensures that hygiene is optimal, with
Water ow 1200-2400 l/h reduced risk of corrosion. The Unitor Duo Booster can on
Inlet temperature 70 C special request be equipped with a PCB - extended
electronics allowing the use of factory mounted options such
Voltage 440 V
as remote control, coin boxes, frost protection. The Unitor
Electric cycles 60 Hz Duo Booster can thus be adapted to most customer specic
requirements.
Twin pump stationary cold water unit for medium and heavy
cleaning applications in maritime use.
180
Accessories
Product number Product name
545327 CHEM. INJECTOR DETACHABLE
671792 HEAVY DUTY DECK HOSE 25M
546150 DOUBLE LANCE 2OOCM LONG
621821 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
565960 INLET FILTER F/1-3 PUMPS
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718593 NOZZLE 06/0DGR. F/EXTENDABLE LANCE
718577 NOZZLE 06/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
545277 ROTARY BRUSH 170CM LONG
545251 ROTARY BRUSH 80CM LONG
565853 LANCE F/VSB 300 03K
618355 SIGN OUTLET POINT
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
545640 SUCTION HOSE&ROD F/VSB300
623595 TAKE OFF VALVE
623603 TAKE OFF VALVE
556696 TAKE OFF VALVE B CMPL.. W/INJECTOR
662163 TORNADO LANCE 92CM WITH 05 NOZZLE
545434 DOUBLE LANCE 10CM LONG
682070 UNIVERSAL.3000 LANCE 06 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
546044 WASHING BRUSH 235CM LONG
181
MA
MARRINE P
PRRODUCTS Stationary High Pressure Systems
Stationary Cold Water Cleaners
DELTA B
BOOOSTER-3 3X
3X440
440/60
/60
435 613803
Three pump stationary system allowing up to 3 operators to clean simultaneously. Further pumps may
be added at any time if the cleaning needs increases. Stainless steel frame and robust cabinet ensure
that both pumps and electronics are well protected. Flexible system gives possibility of combining
several Delta Boosters allowing for multiple simultaneous users on a single line.
Features
3 pump system, allowing up to three simultaneous uses
4 ceramic piston pumps with 1750 RPM motors long life pumps for intense applications
Electronic pump control system ow control system will detect amount of water required automatically
Different line pressures available the Delta Booster is congured standard to 160 bar, but can be supplied with line
pressure down to 80 bar which gives the vessel a tailor made system that suits the needs on board
Inlet water capacity to 80 C the unit is equipped with a hot and a cold water tank and temp control system. The
double tanks allow storage of both cold and pre-heated water. The control system will maintain the selected
temperature
Compact design with door opening both left and right the Delta Booster is easy to transport, install and service
High level of serviceability the pumps and motors are quickly and easily removed and the unit will continue to
function even with one or more pumps removed
Oil changes are easy reduces the down time of the system
Benets
Multiple users - reduces cleaning time
Flexible system - can be extended
Ergonomic cleaning - only hose must be connected to outlet
Low service requirements and low wear and tear
Technical data and nally 3 pumps for 3 users. If service is required, one
pump can be taken out, leaving 2 pumps operational for
Pressure 160 bar cleaning. Electronic pump control system control system
Water ow 1040-3120 l/h will detect the amount of water required by the relevant
Voltage 440 V number of uses based upon ow and start the correct
number of pumps automatically. As water requirement
Electric cycles 60 Hz
drops, pumps will be stopped. Starting of pumps is done by
Inlet temperature 85 C rotation to avoid excessive wear on any one pump. As water
requirement drops, pumps will be stopped. Starting of
Operating pressure 160 bar. Waterow 1040 - 3120 l/h. The pumps is done by rotation to avoid excessive wear on any
unit revolves between different pumps. Flow system starts one pump.
up one pump per user; 1 user - pump, 2 users - 2 pumps
182
Accessories
Product number Product name
545327 CHEM. INJECTOR DETACHABLE
671792 HEAVY DUTY DECK HOSE 25M
546150 DOUBLE LANCE 2OOCM LONG
621821 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
565960 INLET FILTER F/1-3 PUMPS
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718593 NOZZLE 06/0DGR. F/EXTENDABLE LANCE
718577 NOZZLE 06/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
545277 ROTARY BRUSH 170CM LONG
545251 ROTARY BRUSH 80CM LONG
565853 LANCE F/VSB 300 03K
618355 SIGN OUTLET POINT
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
545640 SUCTION HOSE&ROD F/VSB300
623595 TAKE OFF VALVE
623603 TAKE OFF VALVE
556696 TAKE OFF VALVE B CMPL.. W/INJECTOR
662163 TORNADO LANCE 92CM WITH 05 NOZZLE
545434 DOUBLE LANCE 10CM LONG
682070 UNIVERSAL.3000 LANCE 06 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
546044 WASHING BRUSH 235CM LONG
183
MA
MARRINE P
PRRODUCTS Stationary High Pressure Systems
Stationary Cold Water Cleaners
DELTA B
BOOOSTER-4 3X
3X440
440/60
/60
435 613804
Features
Stainless steel frame and robust cabinet ensuring that pumps and electronics are well protected
2-6 pump system, allowing up to 6 simultaneous uses - piston pump with 1750 RPM motor long life pump for
intense applications over 8 hours per day
Electronic pump control system control system will detect the amount of water required by the relevant number of
uses based upon ow and start the correct number of pumps automatically
As water requirement drops, pumps will stop. Pumps started on rotation to avoid excessive wear on any one pump
Different line pressures available - the Delta Booster is congured standard to 120 or 160 bar, but can be supplied
with line pressure down to 80 bar
Inlet water capacity to 80 C the unit is equipped with a hot and a cold water tank and temp control system. The
double tanks allow storage of both cold and pre-heated water. The control system will maintain the selected
temperature
Compact design with door opening both left and right
High level of serviceability pumps and motors are quickly and easily removed and the unit will continue to function
even with one or more pumps removed
Oil changes are easy reduces the down time of the system
Benets
Efcient operation- reduced time for oil changes
Compact and easy to store
Ability to combine several delta boosters allowing for multiple users on single line
Low service requirements and low wear and tear
Easy to transport, install and service
Technical data
184
Accessories
Product number Product name
545327 CHEM. INJECTOR DETACHABLE
671792 HEAVY DUTY DECK HOSE 25M
546150 DOUBLE LANCE 2OOCM LONG
621821 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
565978 INLET FILTER F/4-6 PUMPS
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718593 NOZZLE 06/0DGR. F/EXTENDABLE LANCE
718577 NOZZLE 06/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
545277 ROTARY BRUSH 170CM LONG
545251 ROTARY BRUSH 80CM LONG
565853 LANCE F/VSB 300 03K
618355 SIGN OUTLET POINT
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
545640 SUCTION HOSE&ROD F/VSB300
623595 TAKE OFF VALVE
623603 TAKE OFF VALVE
556696 TAKE OFF VALVE B CMPL.. W/INJECTOR
662163 TORNADO LANCE 92CM WITH 05 NOZZLE
545434 DOUBLE LANCE 10CM LONG
682070 UNIVERSAL.3000 LANCE 06 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
546044 WASHING BRUSH 235CM LONG
185
MA
MARRINE P
PRRODUCTS Stationary High Pressure Systems
Stationary Cold Water Cleaners
DELTA B
BOOOSTER-5 3X
3X440
440/60
/60
435 613805
A 5 pump stationary system where up to ve operators may clean simultaneously. Further pumps may
be added at any time.
Features
Stainless steel frame and robust cabinet ensuring that pumps and electronics are well protected
5 pump system, allowing up to 5 simultaneous uses - piston pump with 1750 RPM motor long life pump for
intense applications over 8 hours per day
Electronic pump control system control system will detect the amount of water required by the relevant number of
uses based upon ow and start the correct number of pumps automatically
As water requirement drops, pumps will stop. Pumps started on rotation to avoid excessive wear on any one pump
Different line pressures available - the Delta Booster is congured standard to 120 or 160 bar, but can be supplied
with line pressure down to 80 bar
Inlet water capacity to 80 C the unit is equipped with a hot and a cold water tank and temp control system. The
double tanks allow storage of both cold and pre-heated water. The control system will maintain the selected
temperature
Compact design with door opening both left and right
High level of serviceability pumps and motors are quickly and easily removed and the unit will continue to function
even with one or more pumps removed
Oil changes are easy reduces the down time of the system
Benets
Efcient operation- reduced time for oil changes
Compact and easy to store
Ability to combine several delta boosters allowing for multiple users on single line
Low service requirements and low wear and tear
Easy to transport, install and service
Technical data
186
Accessories
Product number Product name
545327 CHEM. INJECTOR DETACHABLE
671792 HEAVY DUTY DECK HOSE 25M
546150 DOUBLE LANCE 2OOCM LONG
621821 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
565978 INLET FILTER F/4-6 PUMPS
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718593 NOZZLE 06/0DGR. F/EXTENDABLE LANCE
718577 NOZZLE 06/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
545277 ROTARY BRUSH 170CM LONG
545251 ROTARY BRUSH 80CM LONG
565853 LANCE F/VSB 300 03K
618355 SIGN OUTLET POINT
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
545640 SUCTION HOSE&ROD F/VSB300
623595 TAKE OFF VALVE
623603 TAKE OFF VALVE
556696 TAKE OFF VALVE B CMPL.. W/INJECTOR
662163 TORNADO LANCE 92CM WITH 05 NOZZLE
545434 DOUBLE LANCE 10CM LONG
682070 UNIVERSAL.3000 LANCE 06 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
546044 WASHING BRUSH 235CM LONG
187
MA
MARRINE P
PRRODUCTS Stationary High Pressure Systems
Stationary Cold Water Cleaners
DELTA B
BOOOSTER-6 3X
3X440
440/60
/60
435 613806
Features
Stainless steel frame and robust cabinet ensuring that pumps and electronics are well protected
2-6 pump system, allowing up to 6 simultaneous uses - piston pump with 1750 RPM motor long life pump for
intense applications over 8 hours per day
Electronic pump control system control system will detect the amount of water required by the relevant number of
uses based upon ow and start the correct number of pumps automatically
As water requirement drops, pumps will stop. Pumps started on rotation to avoid excessive wear on any one pump
Different line pressures available - the Delta Booster is congured standard to 120 or 160 bar, but can be supplied
with line pressure down to 80 bar
Inlet water capacity to 80 C the unit is equipped with a hot and a cold water tank and temp control system. The
double tanks allow storage of both cold and pre-heated water. The control system will maintain the selected
temperature
Compact design with door opening both left and right
High level of serviceability pumps and motors are quickly and easily removed and the unit will continue to function
even with one or more pumps removed
Oil changes are easy reduces the down time of the system
Benets
Efcient operation: reduced time for oil changes
Compact and easy to store
Ability to combine several Delta boosters allowing for multiple users on single line
Low service requirements and low wear and tear
Easy to transport, install and service
Technical data
Length 715 mm
Width 790 mm
Height 1800 mm
Weight 450 kg
Power, rated 40.5 kW
Electric cycles 60 Hz
Electric phase 3
Voltage 440 V
Inlet temperature 80 C
Water ow 6240 - 1040 l/h
188
Accessories
Product number Product name
545327 CHEM. INJECTOR DETACHABLE
671792 HEAVY DUTY DECK HOSE 25M
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
565978 INLET FILTER F/4-6 PUMPS
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718593 NOZZLE 06/0DGR. F/EXTENDABLE LANCE
718577 NOZZLE 06/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
545277 ROTARY BRUSH 170CM LONG
545251 ROTARY BRUSH 80CM LONG
565853 LANCE F/VSB 300 03K
618355 SIGN OUTLET POINT
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
545640 SUCTION HOSE&ROD F/VSB300
623595 TAKE OFF VALVE
623603 TAKE OFF VALVE
556696 TAKE OFF VALVE B CMPL.. W/INJECTOR
662163 TORNADO LANCE 92CM WITH 05 NOZZLE
545434 DOUBLE LANCE 10CM LONG
682070 UNIVERSAL.3000 LANCE 06 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
565960 INLET FILTER F/1-3 PUMPS
621912 HOSE INLET 1"
621904 HOSE, HP OUTLET
711119 HP.OUTLET HOSE FOR STATIONARY 2M
711127 HP.OUTLET HOSE FOR STATIONARY 1M
189
MA
MARRINE P
PRRODUCTS Stationary High Pressure Systems
Stationary Cold Water Cleaners
UNO B
BOOOSTER 3X
3X440
440 V 60 HZ 160 B
BAAR
435 548826
One pump stationary cold water high pressure washers for medium to heavy cleaning.
Features
Stainless steel frame and robust cabinet ensure long lifespan
Inlet water temp 70 C ideal for use with pre-heated water in order to obtain an increased cleaning effect
4 ceramic piston heavy duty pump for long working life
Lowered pressure output pump pressure has been reduced to 160 bar in order to lower the service requirements
and wear and tear
1450 RPM motor slow running motor gived longer working life in high intensity uses
Benets
Small and compact easily xed to the bulkhead or deck
Long life pump for intense applications over 8 hours per day
Built-in water tank ensures trouble-free water supply
High level of serviceability
Technical data The Unitor Uno Booster is a exible model for heavy cleaning
applications. The stainless steel design ensure that hygiene
Pressure 160 bar is optimal, with reduced risk of corrosion. The product is
Water ow 1200 l/h thus suited also for galley cleaning on cruise vessels. The
Inlet temperature 70 C Unitor Uno Booster can on special request be equipped with
a PCB - extended electronics allowing the use of factory
Voltage 440 V
mounted options such as remote control, frost protection.
Electric cycles 60 Hz The Unitor Uno Booster can thus be adapted to most
customer specic requirements.
Single pump stationary cold water unit for medium and
heavy cleaning applications in marine use.
190
MA
MARRINE P
PRRODUCTS Stationary High Pressure Systems
Spares & Accessories Cold Water Stationary Systems
TAKE O
OFFF V
VA
ALVE A F
FOOR S
SAATIO
IONA
NAR
RY A
AC
CID P
PRROOF
316
436 623595
TAKE O
OFFF V
VA
ALVE A F
FOOR S
STTATIO
IONA
NAR
RY C
CHR
HRO
OMIU
MIUM
M
PLATED BBR
RASS
436 623603
191
MA
MARRINE P
PRRODUCTS Stationary High Pressure Systems
Stationary Hot Water Cleaners
SOLAR BBO
OOSTER W
WIT
ITH
H 18 K
KW
W HE
HEAATER, 3X
3X440
440
V/60 HZ
435 665190
Features
Small and compact easily xed to the deck
Stainless steel frame and robust cabinet ensures long life span and protects the pump from damage
Inlet water temp 85 C ideal for use with pre-heated water in order to reduce the power needed to heat the water
to the required temperature
4 ceramic piston pump unit designed using long life pumps for intense applications over 8 hours per day
Lowered pressure output units run on 160 bar only, although the pump is capable of delivering 190 bar, in order to
lower the service requirements and wear and tear
1400 RPM motor slow running motor gives longer working life in high intensity uses
Built-in water tank with heaters ensures constant and trouble free heating and constant water supply to the pump
Electric water heating unit is pollution free and can be set up almost anywhere
1x18 kW heating coils in standard model can be extended up to 54 kW with 3x18 kW if required
Benets
Environmentally friendly, pollution-free
Highly portable unit can be set up almost anywhere
Long lifespan
Technical data
Length 690 mm
Width 860 mm
Height 950 mm
Weight 175 kg
Power, rated 7.7 + 18 kW
Electric cycles 60 Hz
Electric phase 3
Pressure 160 bar
Voltage 440 V
Heating capacity 85 C
Water ow 1200 l/h
192
Accessories
Product number Product name
545327 CHEM. INJECTOR DETACHABLE
546150 DOUBLE LANCE 2OOCM LONG
621821 DRAIN CLEANER, COMPLETE
545335 FOAM INJECTOR DETACHABLE
545343 FOAM LANCE 120CM LONG
586776 HEAVY DUTY HOSE 10 MTR
586792 HEAVY DUTY HOSE 15 MTR
586784 HEAVY DUTY HOSE 25 MTR
546036 COUPLING KIT ERGO 3000
621896 HOSE CART, MOBILE
659151 EXTENDABLE LANCE 5.5M W/OUT NOZZLE
565960 INLET FILTER F/1-3 PUMPS
621938 LONG REACH LANCE
671800 HEAVY DUTY HOSE, BLUE 10M
671818 HEAVY DUTY HOSE, BLUE 25M
718593 NOZZLE 06/0DGR. F/EXTENDABLE LANCE
718577 NOZZLE 06/25DGR. F/EXTENDABLE LANCE
659128 POWERSPEED LANCE WITH 06 NOZZLE
545277 ROTARY BRUSH 170CM LONG
545251 ROTARY BRUSH 80CM LONG
565853 LANCE F/VSB 300 03K
618355 SIGN OUTLET POINT
665158 ERGO 3000 SPRAY GUN
577379 STAINL.ST. CLEAN. TROLLEY
545640 SUCTION HOSE&ROD F/VSB300
623595 TAKE OFF VALVE
623603 TAKE OFF VALVE
556696 TAKE OFF VALVE B CMPL.. W/INJECTOR
662163 TORNADO LANCE 92CM WITH 05 NOZZLE
545434 DOUBLE LANCE 10CM LONG
682070 UNIVERSAL.3000 LANCE 06 NOZZLE
565861 RUBBER NOZZLE F/VSB 300
546044 WASHING BRUSH 235CM LONG
193
MA
MARRINE P
PRRODUCTS Stationary High Pressure Systems
Stationary Hot Water Cleaners
SOLAR BBO
OOSTER W
WIT
ITH
H 18 K
KW
W HE
HEAATER, 3X
3X400
400
V/50 HZ
435 665208
Features
Small and compact easily xed to the deck
Stainless steel frame and robust cabinet ensures long life span and protects the pump from damage
Inlet water temp 85 C ideal for use with pre-heated water in order to reduce the power needed to heat the water
to the required temperature
4 ceramic piston pump unit designed using long life pumps for intense applications over 8 hours per day
Lowered pressure output units run on 160 bar only, although the pump is capable of delivering 190 bar, in order to
lower the service requirements and wear and tear
1400 RPM motor slow running motor gives longer working life in high intensity uses
Built-in water tank with heaters ensures constant and trouble free heating and constant water supply to the pump
Electric water heating unit is pollution free and can be set up almost anywhere
1x18 kW heating coils in standard model can be extended up to 54 kW with 3x18 kW if required
Benets
Environmentally friendly, pollution-free
Highly portable unit can be set up almost anywhere
Long lifespan
Technical data
Length 690 mm
Width 860 mm
Height 950 mm
Weight 175 kg
Power, rated 7.7 + 18 kW
Electric cycles 50 Hz
Electric phase 3
Pressure 160 bar
Voltage 380 V
Heating capacity 85 C
Water ow 1200 l/h
194
MA
MARRINE P
PRRODUCTS Vacuum Cleaning Equipment
Wet & Dry Cleaning Units
VCWD20 W
WEET A
AND
ND D
DRRY V
VA
ACUUM C
CLLEANE
NERR
432 756900
VCWD 20 is a semi-professional compact wet and dry vacuum cleaner ideal for small, simple jobs on
board. Semi-automatic push and clean system allows the user to clean the lter for optimal suction
capacity.
Features
Small and compact
Washable PET cartridge lter with up to 99.99% ltration
Push and clean semi-automatic lter cleaning
Ideal for fast, simple jobs
Cable hook
Benets
Suction of both wet and dry possible
Economical reusable lter reduces operating costs
Improved suction due to semi-automatic lter clean
Technical data
Ordering information
Supplied with: 1 x wet lter
Floor nozzle (300 mm)
Extension tube, plastic Crevice tool
Filter element, PET
4 x lter bags
195
MA
MARRINE P
PRRODUCTS Vacuum Cleaning Equipment
Wet & Dry Cleaning Units
VCWD70 W
WEET A
AND
ND D
DRRY V
VA
ACUUM C
CLLEANE
NERR
432 721944
Features
Built-in submerged pump can operate without
removing or lifting the container
Heavy duty stainless steel container makes the unit
capable of removing a wide range of liquids and solid
particles without damaging the container
Two large wheels at the rear ensure stability during
transport and storage
Brakes on the front wheels means the unit remains
stable when in use or in storage
Heavy-duty steel frame protects the unit from
damage during transport and use
Power supply socket for connection of electric tools;
when the pump is not in use the socket can be used
to power a power tool
Dirt basket when vacuuming dirty liquids the
basket makes sure that the particles stay inside the
unit when the liquid is pumped out
Benets
Cable and accessories holder ensures safe transport and storage
Large area liquid removal capabilities with the correct accessories the unit can be used to remove liquids from large
areas like decks, pool areas & passenger decks
Soft start limits the starting power to reduce the initial power surge on the fuses and reduce wear and tear on the
motor
196
Technical data and time-saving.
Operating costs are minimized with the washable PET eece
Power, rated 1500 + 640 W lter elements, and the low working noise level allows work
Flowrate, normal 216000 l/h when others are nearby, without disturbing them. Automatic
Vacuum 230 Mbar On/Off models are suitable for use with electric hand tools
as starting or stopping the tool also starts and stops the
Container capacity 64
vacuum. An accessory airbox is available which performs
Voltage 220 V the same function when using pneumatic tools.
Power supply cycles 50/60 Hz
XtremeClean fully automatic lter cleaning system (on
many models) takes care of lter cleaning tasks in just
VCWD70 wet and dry vacuum cleaner is perfect for users
a few seconds
who need big capacity and features that focus on efciency.
Washable PET eece lter for high efciency and low
Our most silent vacuum ever, with superior suction
maintenance costs
performance, stainless steel tilt or lift-out container,
SilentPower provides high performance that is seen,
automatic lter cleaning, anti-static capability and more.
but not heard
The 70 litre container found on the wet and dry vacuum 70 litre stainless steel container and a lter bag for the
cleaner allows long periods of use without emptying the ultimate in effective ltration and working efciency
container, and Tilt or lift-off container system is convenient
Accessories
Product number Product name
681940 LARGE.DECK CLEANING KIT FOR VCWD 70
197
MA
MARRINE P
PRRODUCTS Vacuum Cleaning Equipment
Wet & Dry Cleaning Units
VCWD27 W
WEET A
AND
ND D
DRRY V
VA
ACUUM C
CLLEANE
NERR
432 681924
Features
Rubber enclosed power cord which stays exible even in very low temperatures and is resistant to wear and tear
Large application area as the unit is resistant to most chemicals and oils and can be used for a variety of cleaning
tasks including removal of liquids and solids in the workshop, engine room, deck areas and accommodation areas
Large on/off switch can be started or stopped without removing gloves
Large wheels provide stability even on rough surfaces
Power cord hook ensures the cord stays secured to the unit while in transit or in storage
Benets
Low noise level means the unit can be used for longer periods and in environments where noise must be held at a
minimum
Ergonomic design means the unit can be used for longer periods of time due to lower user fatigue
Technical data
198
MA
MARRINE P
PRRODUCTS Vacuum Cleaning Equipment
Wet & Dry Cleaning Units
VCAD200 W
WEET A
AND
ND D
DRRY V
VA
ACUUM C
CLLEANE
NERR
432 682054
Features
Attaches on top of any 200 litre drum no need to
store a big container when not in use
Air driven
No moving parts
Oil resistant the unit can be used for small oil spills
on board, as an oil transfer pump or to remove
wastewater from tanks or double bottoms
Benets
Universal - the unit will use any obsolete drum
No danger of sparks
Virtually maintenance-free
Versatile unit can be used as a transfer pump if needed
Technical data The unit has no moving parts and is designed to be tted on
a standard 200 litre drum. The unit can be used for a variety
Air consumption 3600 l/min of tasks including removing water and oil spillage, emptying
Vacuum 390 MBAR drums or moving chemicals. Able to handle particles and
Connection size/type 1/4'' liquids that many electric vacuums would not be able to
handle.
Ordering information
Supplied with: Coarse dirt deck nozzle
Tubes
Suction hose
Crevice nozzle
Accessories
Product number Product name
191692 40 USH SOCKET 1/2'' HOSE
191726 20 USM SOCKET 1/4'' MALE BSP.T
191841 40 UPH PLUG 1/2'' HOSE
671719 AIR HOSE 1/2", PVC
199
MA
MARRINE P
PRRODUCTS Vacuum Cleaning Equipment
Accessories & Spares Vacuum Cleaners
SUCTIO
IONN HO
HOSSE 1.
1.88MF
FOOR V
VC
CWD18
431 665448
STRAIG
IGHT
HT T
TUUBE V
VC
CD15 & 2
277
431 665232
Extension tube
WATER HO
HOSSE & S
SUUCTIO
IONN HO
HOSSE F
FRRO V
VC
CCW24
431 682013
CARPET NO
NOZ
ZZLE F
FOOR V
VC
CCW24
431 682021
DECK S
SCCRUBBING A
ADDAPTER F
FOOR V
VC
CCW24
431 682039
200
MA
MARRINE P
PRRODUCTS Vacuum Cleaning Equipment
Accessories & Spares Vacuum Cleaners
SUCTIO
IONN HO
HOSSE 4M F
FOOR V
VC
CWD 7
700
431 681965
LARGE D
DEECK C
CLLEANING K
KIT
IT F
FOOR V
VC
CWD 7
700
431 681940
LIQ
IQUUID R
REEMO
MOV
VAL K
KIT
IT F
FOOR V
VC
CWD 7
70
0
431 681957
CURVED T
TUUBE 100 C
CMMF
FOOR V
VC
CWD 7
700
431 681973
201
MA
MARRINE P
PRRODUCTS Cargo Hold Cleaning
Mucking Pumps
MU
MUCCKING P
PUUMP - MA
MARRINE G
GM2
M2
482 593996
Features
Supply liquid can include most pressurised uids (water, crude/rened oil, and chemicals
Operates on normal pressure of a vessel's re, tank cleaning or cargo lines, does not require additional equipment
Passes through a standard butterworth opening enabling access to all parts of the vessel
Built in pressure gauge enables easy ability control and monitor ow
Benets
Versatile pump with unlimited applications
Handles solids up to 1 in diameter great for removing scale and rust from cargo holds
Corrosion resistant stainless steel parts are virtually maintenance free
Simple to operate with no moving parts and is lightweight
Fastest way of removing liquids
Weight 30 kg velocity energy. The material can be shovel fed into the unit if
it is solidied. The emerging supply uid is collected in the
Capacity submerged 40 tons/hour
mixing chamber, mixed with the surrounding liquid or
Capacity manual load 6 tons/hour particles and than ejected as a fully mixed solution through
the diffuser.
The solution is based on the Venturi principle, the
pressurized supply uid is converted by the nozzle into
Accessories
Product number Product name
708156 BUTTERWORTH CONNECTORS
708123 CAMLOC CONNECTOR 102MM TABLE D FLEN
708131 2 PCS TPI CONNECTOR
708099 VACUUM KIT
661702 MUD & SILT REMOVER 210 LTR
635326 MUD & SILT REMOVER 25 LTR
757777 HANDYMAX CARGO HOLD CLEANING KIT
749770 PANAMAX CARGO HOLD CLEANING KIT
749746 PANAMAX LIGHT HOLD CLEANING KIT
202
MA
MARRINE P
PRRODUCTS Cargo Hold Cleaning
Mucking Pump - Accessories, consumables & spares
VACUUM K
KIT
IT F
FOOR MU
MUCCKING P
PUUMP
482 708099
CAML
MLOOC C
COONNE
NNECCTOR 10
1022 MM T
TA
ABLE D F
FLLENG
FOR MU
MUCCKING P
PUUMP
482 708123
TPI C
COONNE
NNECCTORS F
FOOR MU
MUCCKING P
PUUMP
482 708131
BUTTERWORTH C
COONNE
NNECCTORS F
FOOR MU
MUCCKING
PUMP
482 708156
203
MA
MARRINE P
PRRODUCTS Cargo Hold Cleaning
Cargo Hold Cleaning Kit
CARGO HO
HOLLD C
CLLEANING K
KIT
IT - HA
HAND
NDY
YMA
MAX
X
482 757777
Features
Simple to use - the 2.4 m lance applies foaming
chemicals from the tank top
Supplied with 1.5" double diaphragm pump
Ready for use - all hoses and equipment are tted
with quick connectors and couplings
Designed for Panamax sized vessels
Benets
Fast and efcient cleaning solution reduces turnaround time in port
Simplicity through simple to assembly and clear instructions
Safe in use and no need for cranes
The kit consists of all necessary equipment needed for a transported between vessels. The equipment has been
complete cleaning operation. The kit is supplied ready to use designed for application of both cleaning chemicals and
in a shock proof plastic container which can be easily temporary coatings as well as rinsing and wash down.
Ordering information
Supplied with: 40 m, 3/8 air hose with quick connectors
10 m, 3/8 air hose with quick connectors
Double diaphragm pump 1050 50 m, 3/4 chemical hose with quick connectors
Long reach lance 2.4 m with 3 nozzles 550 L plastic container
Medusa air distributor
5 m, 1" suction hose
Accessories
Product number Product name
575605 AQUABREAK PX 210 LTR
737007 AQUATUFF HIGH FOAM 210 LTR
571653 DESCALING LIQUID 25 LTR
655506 METAL BRITE HD 210 LTR
737023 SLIP-COAT 210 LTR
757396 SLIP-COAT WR (210 LTR)
Related products:
593996 MUCKING PUMP - MARINE GM2
682054 VCAD200 WET AND DRY VACUUM CLEANER
658229 TORNADO 3 CARGO HOLD CLEANING JET
740761 EXTENSION.FOR CHEM APPLICATOR LANCE
204
CARGO HO
HOLLD C
CLLEANING K
KIT
IT - P
PA
ANA
NAMA
MAXXL
LIG
IGHT
HT
482 749746
Features
Simple to use
Fast - covers up to 150 m2/min of bulkheads with
foaming chemicals
Designed for Panamax sized vessels
Benets
Fast and efcient cleaning solution reduces
turnaround time in port
Simplicity through simple to assembly and clear instructions
Safe in use and no need for cranes
The equipment has a reach of 25 m using the foam nozzle The Panamax light kit is equivalent to the Panamax kit
which enables the crew to work from the tank top without excluding the Tornado 3 cleaning jet and water supply hose.
the use of cranes or scaffolding even on a Panamax size This light version is for vessels that have a water jet solution.
vessel. By using the guide wire kit (included) the reach can The Panamax light is supplied in a single plastic container,
be extended to even greater heights. reducing the storing space.
Ordering information
Chemical applicator 150 3/4" Chemical hose - 50 m with Unitor quick
Long reach lance - 4.8 m with 3 seperate nozzles couplings
1/2" air supply hose - 50 m with Unitor quick Guide wire kit
couplings 550 L plastic container
3/4" Air supply hose - 50 m with Unitor quick
couplings
Accessories
Product number Product name
575605 AQUABREAK PX 210 LTR
737007 AQUATUFF HIGH FOAM 210 LTR
571653 DESCALING LIQUID 25 LTR
655506 METAL BRITE HD 210 LTR
737023 SLIP-COAT 210 LTR
757396 SLIP-COAT WR (210 LTR)
Related products:
593996 MUCKING PUMP - MARINE GM2
682054 VCAD200 WET AND DRY VACUUM CLEANER
740712 TORNADO 4 CARGO HOLD CLEANING JET
740761 EXTENSION.FOR CHEM APPLICATOR LANCE
205
CARGO HO
HOLLD C
CLLEANING K
KIT
IT - P
PA
ANA
NAMA
MAXX
482 749770
Features
Simple to use
Fast - covers up to 150 m2/min of bulkheads with
foaming chemicals
Designed for Panamax sized vessels
Benets
Fast and efcient cleaning solution reduces
turnaround time in port
Simplicity through simple assembly and clear
instructions
Safe in use and no need for cranes
The equipment has a reach of 25 m using the foam nozzle vessel. By using the guide wire kit (included) this reach may
which enables the crew to work from the tank top without be further extended for use on board cape size vessels.
the use of cranes or scaffolding even on a Panamax size
Ordering information
Supplied with: 3/4" Air supply hose - 50 m with Unitor quick
couplings
Chemical applicator 150 3/4" Chemical hose - 50 m with Unitor quick
Long reach lance - 4,8 m with 3 nozzles couplings
Tornado 3 Cleaning Jet Guide wire kit
2" Water supply hose - 45 m with Storz C couplings 550 L plastic storage container (2 pieces)
1/2" Air supply hose - 50 m with Unitor quick
couplings
Accessories
Product number Product name
575605 AQUABREAK PX 210 LTR
737007 AQUATUFF HIGH FOAM 210 LTR
571653 DESCALING LIQUID 25 LTR
655506 METAL BRITE HD 210 LTR
737023 SLIP-COAT 210 LTR
757396 SLIP-COAT WR (210 LTR)
Related products:
593996 MUCKING PUMP - MARINE GM2
682054 VCAD200 WET AND DRY VACUUM CLEANER
740712 TORNADO 4 CARGO HOLD CLEANING JET
740761 EXTENSION.FOR CHEM APPLICATOR LANCE
206
MA
MARRINE P
PRRODUCTS Cargo Hold Cleaning
Cargo Hold Cleaning Kit - Accessories, consumables & spares
EXTENS
NSIO
ION
NFFO
OR C
CHE
HEMIC
MICAAL A
APPPLIC
ICAATOR L
LAANC
NCEE
482 740761
207
MA
MARRINE P
PRRODUCTS Cargo Hold Cleaning
Cleaning Jets
TORNA
NADDO 2 C
CAARGO HO
HOLLD C
CLLEANING J
JEET
482 740779
Features
Easy to set up and use
High quality non-corrosive materials ensure long
operating life with minimum maintenance
High pressure and high water volume provide
efcient and quick cleaning
Long reach capability is optimal solution for
encrusted dirt and scale on the bulkheads
Benets
No specialist operator training required
Efcient and fast
The Tornado 2 can be connected to either the fresh water the jet as a foam applicator or a temporary coating
line or to the suppression pump. The Jet features a applicator as well as its main function of rinsing or washing
replaceable nozzle system that enables the operator to use down.
208
MA
MARRINE P
PRRODUCTS Cargo Hold Cleaning
Cleaning Jets
TORNA
NADDO 3 C
CAARGO HO
HOLLD C
CLLEANING J
JEET
482 658229
Features
Stainless steel design
Swivel connection between gun and tripod
Works on normal re line and working air line on
board
High water volume
Benets
Long operating life with minimum maintenance
Easy to set-up and connect without any additional equipment
Enables crew to clean cargo holds quickly
Easy to use, aim and transport and does not require any special training
Technical data The intended use is cleaning and descaling of cargo holds. It
uses the suppression pump as a water source. This enables
Recommended water pressure 6 bar the jet to reach the top of the hold and at the same time
Recommended air pressure 7 bar giving the capacity needed to remove even the most
Air consumption 2 m3/min stubborn dirt or scale.
Accessories
Product number Product name
574947 GUARDMAN FIREHOSE 2" PER MTR
191965 600 UPF PLUG 3/4'' FEMALE BSP.T
191866 600 UPH PLUG 3/4'' HOSE
191817 600 USF SOCKET 3/4'' FEMALE BSP.T
191718 600 USH SOCKET 3/4'' HOSE
671776 AIR HOSE 3/4", RUBBER LTH=50MTR
233833 NOR-1 CPL W/2'' HOSE SOCKET
523431 STORZ 65 CPL W/2'' HOSE SOCKET
209
MA
MARRINE P
PRRODUCTS Cargo Hold Cleaning
Cleaning Jets
TORNA
NADDO 4 C
CAARGO HO
HOLLD C
CLLEANING J
JEET
482 740712
Features
Easy to set up and use with no specialist operator
skill or training required
High quality non-corrosive material ensures long
operating life with minimum maintenance
High pressure and high water volume provides
efcient and quick cleaning
Benets
Long reach - optimal solution for encrusted dirt and scale on the bulkheads
Can be used onboard ChinaMax vessels
Technical data The Tornado 4, like the Tornado 3, uses the power
suppression pump to power it. While the Tornado 3 is
Water Flow 80 - 120 m3/h
capable of delivering up to 22m3/h, the Tornado 4 can
Range 40 - 70 m handle up to 120m3/h. This huge amount of water is
Recommended water pressure 7 - 10 bar capable of removing any cargo residue or scale at large
Water Connection 2 1/2" (Stoz C) distances. Increasingly large vessels, including ChinaMax
vessels, require powerful equipment to enable fast and
Required air ow 5 m3/min
efcient cleaning, reducing turnaround time in port.
Recommended air pressure 7 - 10 bar
Air Connection 1" (claw coupling)
210
MA
MARRINE P
PRRODUCTS Ultrasonic - Part and Filter cleaners
Ultrasonic
UNIT
NITO
OR U
ULLTRASONIC C
CLLEANE
NERRS
S--700
00/HM,
/HM, 110 V
664 766899
Features
Sweep function
New units have a front mounted panel for electronics, enabling efcient servicing
Efcient and fast heating
Ordering information
Supplied with: Drain, lid, basket and stainless steel frame
for secure fastening to the oor.
Accessories
Product number Product name
607819 UNITOR USC 12 X 1 LTR
575613 AQUABREAK PX 25 LTR
575696 CARBONCLEAN LT 25 LTR
571430 COLDWASH HD 25 LTR
571380 ENVIROCLEAN 25 LTR
571661 METAL BRITE 25 LTR
211
UNIT
NITO
OR U
ULLTRASONIC C
CLLEANE
NERRS
S--700
00/HM,
/HM, 230 V
664 766881
Features
Sweep function
New units have a front mounted panel for
electronics, enabling efcient servicing of electronics
in the machine
Efcient and fast heating
Ordering information
Supplied with: Basket
Stainless steel frame for secure fastening to the oor
Bottom drain
Lid
Accessories
Product number Product name
607819 UNITOR USC 12 X 1 LTR
212
Product number Product name
575613 AQUABREAK PX 25 LTR
575696 CARBONCLEAN LT 25 LTR
571380 ENVIROCLEAN 25 LTR
571661 METAL BRITE 25 LTR
571430 COLDWASH HD 25 LTR
213
UNIT
NITO
OR U
ULLTRASONIC C
CLLEANE
NERRS
S--1600
1600/HM,
/HM, 230 V
664 766907
Features
Sweep function
New units have a front mounted panel for
electronics, enabling efcient servicing of electronics
in the machine
Efcient and fast heating
Ordering information
Supplied with: Basket
Stainless steel frame for secure fastening to the oor
Bottom drain
Lid
Accessories
Product number Product name
607819 UNITOR USC 12 X 1 LTR
575613 AQUABREAK PX 25 LTR
575696 CARBONCLEAN LT 25 LTR
571430 COLDWASH HD 25 LTR
571380 ENVIROCLEAN 25 LTR
571661 METAL BRITE 25 LTR
214
UNIT
NITO
OR U
ULLTRASONIC C
CLLEANE
NERRS
S--2000
2000/HM,
/HM, 230 V
664 766923
Features
Sweep function
New units have a front mounted panel for
electronics, enabling efcient servicing of electronics
in the machine
Efcient and fast heating
Ordering information
Supplied with: Basket
Stainless steel frame for secure fastening to the oor
Bottom drain
Lid
Accessories
Product number Product name
607819 UNITOR USC 12 X 1 LTR
575613 AQUABREAK PX 25 LTR
575696 CARBONCLEAN LT 25 LTR
571430 COLDWASH HD 25 LTR
571380 ENVIROCLEAN 25 LTR
571661 METAL BRITE 25 LTR
215
UNIT
NITO
OR U
ULLTRASONIC C
CLLEANE
NERRS
S--3300
3300/HM,
/HM, 440 V
664 766956
Unitor Ultrasonic cleaning machines are specially designed for use in the engine room on board to
remove even the most stubborn dirt, cleaning inside areas that are out of reach for conventional
cleaning methods. The S-3300/HM offers cleaning capacity with a length of up to 107 cm.
Features
Sweep function
New units have a front mounted panel for electronics, enabling efcient servicing of electronics in the machine
Efcient and fast heating
Benets
Reduced chemical consumption
Cleans inside lters and fuel nozzles
Logical operation panel
Pulse function for increased cleaning power during operation
Ordering information
Supplied with: Basket
Stainless steel frame for secure fastening to the oor
Bottom drain
Lid
Accessories
Product number Product name
607819 UNITOR USC 12 X 1 LTR
575613 AQUABREAK PX 25 LTR
575696 CARBONCLEAN LT 25 LTR
571430 COLDWASH HD 25 LTR
571380 ENVIROCLEAN 25 LTR
571661 METAL BRITE 25 LTR
216
MA
MARRINE P
PRRODUCTS Ultrasonic - Part and Filter cleaners
Ultrasonic
MU
MULLTI-F
I-FRREQUENC
NCYYG
GEENE
NERRATOR, MF 2000
664 659748
Features
Robust unit - material in contact with cleaning
solution is made of stainless steel
Thermostatic adjustable heating and timer function
Designed for use with water-based as well as
solvent-based cleaning chemicals
Convenient drainage option
Mounted on stainless steel frame for secure fastening to the deck
Ideal partner for cleaning fuel and lube oil lters
Benets
Allows useage of chemicals with less environmental exposure
Flexible solution that can be tailor made
Low audible noise
217
MA
MARRINE P
PRRODUCTS Ultrasonic - Part and Filter cleaners
Ultrasonic
MU
MULLTI-F
I-FRREQUENC
NCYYG
GEENE
NERRATOR, MF 3000
664 659755
Features
Robust unit - material in contact with cleaning
solution is made of stainless steel
Thermostatic adjustable heating and timer function
Designed for use with water-based as well as
solvent-based cleaning chemicals
Convenient drainage option
Mounted on stainless steel frame for secure fastening to the deck
Ideal partner for cleaning fuel and lube oil lters
Benets
Allows useage of chemicals with less environmental exposure
Flexible solution that can be tailor made
Low audible noise
218
MA
MARRINE P
PRRODUCTS Ultrasonic - Part and Filter cleaners
Ultrasonic
MU
MULLTI-F
I-FRREQUENC
NCYYG
GEENE
NERRATOR, MF 4000
664 659763
Features
Robust unit - material in contact with cleaning
solution is made of stainless steel
Thermostatic adjustable heating and timer function
Designed for use with water-based as well as
solvent-based cleaning chemicals
Convenient drainage option
Mounted on stainless steel frame for secure fastening to the deck
Ideal partner for cleaning fuel and lube oil lters
Benets
Allows useage of chemicals with less environmental exposure
Flexible solution that can be tailor made
Low audible noise
219
MA
MARRINE P
PRRODUCTS Ultrasonic - Part and Filter cleaners
Ultrasonic
IMME
IMMERRSIB
IBLLE U
ULLTRASONIC T
TRRANS
NSDDUCER, MF
MF-T
-TS
S
600
664 659798
Features
Robust unit made of stainless steel
For installation in new or existing tanks
Compatible with water-based and solvent-based
cleaning chemicals
Removes deposits, soil and fouling completely without additional manual work
Ideal partner for cleaning fuel oil lters, air cooler, and heat exchanger
Benets
Environmentally friendly (promotes use of safe chemicals, lower concentration)
Can be used as single or multiple installation
220
MA
MARRINE P
PRRODUCTS Ultrasonic - Part and Filter cleaners
Ultrasonic
IMME
IMMERRSIB
IBLLE U
ULLTRASONIC T
TRRANS
NSDDUCER, MF
MF-T
-TS
S
1000
664 659797
Features
Robust unit made of stainless steel
For installation in new or existing tanks
Compatible with water-based and solvent-based
cleaning chemicals
Removes deposits, soil and fouling completely without additional manual work
Ideal partner for cleaning fuel oil lters, air cooler, and heat exchanger
Benets
Environmentally friendly (promotes use of safe chemicals, lower concentration)
Can be used as single or multiple installation
221
MA
MARRINE P
PRRODUCTS Ultrasonic - Part and Filter cleaners
Ultrasonic
IMME
IMMERRSIB
IBLLE U
ULLTRASONIC T
TRRANS
NSDDUCER, MF
MF-T
-TS
S
1500
664 659805
Features
Robust unit made of stainless steel
For installation in new or existing tanks
Compatible with water-based and solvent-based
cleaning chemicals
Removes deposits, soil and fouling completely without additional manual work
Ideal partner for cleaning fuel oil lters, air cooler, and heat exchanger
Benets
Environmentally friendly (promotes use of safe chemicals, lower concentration)
Can be used as single or multiple installation
222
MA
MARRINE P
PRRODUCTS Ultrasonic - Part and Filter cleaners
Ultrasonic
IMME
IMMERRSIB
IBLLE U
ULLTRASONIC T
TRRANS
NSDDUCER, MF
MF-T
-TS
S
2000
664 659821
Features
Robust unit made of stainless steel
For installation in new or existing tanks
Compatible with water-based and solvent-based
cleaning chemicals
Removes deposits, soil and fouling completely without additional manual work
Ideal partner for cleaning fuel oil lters, air cooler, and heat exchanger
Benets
Environmentally friendly (promotes use of safe chemicals, lower concentration)
Can be used as single or multiple installation
223
MARINE PRODUCTS
GASES, REFRIGERANTS
AND CYLINDERS
With regulation changing constantly,
shipowners are faced with an onerous task
as they work to ensure that potentially PUMPS
PAINT SPRAYING
dangerous substances are used, stored and AIR TOOLS
disposed of safely and in an environmentally WORKSHOP EQUIPMENT
sound manner. WSS has the worlds largest CLEANING EQUIPMENT
dedicated network of marine refrigerant, GASES, REFRIGERANTS AND CYLINDERS
REFRIGERATION EQUIPMENT
gases and cylinder technicians, all of WELDING
whom understand regulation and work in
partnership with you to recommend the most
suitable course of action.
Our product range includes gases,
spangases, refrigerants, regulators and
gas distribution systems. All products
are supported by WSSs unrivalled global
network, specially trained technicians and
24/7 service support.
All cylinders are BAR-coded, tracked, traced
and secured through the WSS UniTrak
system. This ensures compliance with the
International Code for the Security of Ships
and of Port Facilities (ISPS Code). Every
WSS cylinder can be identied by its own
unique barcode number. Without this
identication the cylinder and its contents
must be considered suspect.
MA
MARRINE P
PRRODUCTS Gases
Acetylene
ACETYLENE A
A--40 F
FIL
ILL
LING
710 905026
Features
Colourless and slightly lighter than air
It is non-toxic, but has an anesthetic effect if inhaled
Acetylene is highly ammable
When mixed with oxygen for welding, the ame
temperature will reach 3100 C
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number.
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Height 1360 mm Acetylene mixed with air is explosive within 2.2% to 85% by
volume. Avoid releasing acetylene into the air and ensure
Weight 128 kg
good ventilation where acetylene cylinders are stored or
Colour MAROON RED kg used.
Diameter 230 mm Tare "A" weight of acetylene cylinders includes cylinder shell,
Connection size/type G 3/4" R.H. INTERNAL bar neckring, valve, porous mass and acetone. For acetylene
Tare weight 67 kg the following is valid:
Gross weight 73 kg
1 nm3 = 1.095 kg
Gas capacity (nm3) 5.6 m3 1 kg = 0.91 nm3
Gas capacity (kg) 6.2 kg 1 bar = 14.5 psi
Acetone contents 12.4 kg 1 nm3 = 35.3 ft3
Volume 40 l 1 kg = 2.2 lbs
Purity 5.0
Saturation gas 0.8 kg
Cylinder type A-40 mm
226
MA
MARRINE P
PRRODUCTS Gases
Acetylene
ACETYLENE A
A--5 F
FIL
ILL
LING
712 905067
Features
Colourless and slightly lighter than air
It is non-toxic, but has an anesthetic effect if inhaled
Acetylene is highly ammable
When mixed with oxygen for welding, the ame
temperature will reach 3100 C
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Height 620 mm Acetylene mixed with air is explosive within 2.2% to 85% by
volume. Avoid releasing acetylene into the air and ensure
Weight 15 kg
good ventilation where acetylene cylinders are stored or
Colour MAROON RED used.
Diameter 140 mm Tare "A" weight of acetylene cylinders includes cylinder shell,
Connection size/type G 3/4" R.H. INTERNAL neckring, valve, porous mass and acetone. For acetylene
Tare weight 14 kg the following is valid:
Gross weight 15 kg 1 nm3 = 1.095 kg
Gas capacity (nm3) 0.7 m3 1 kg = 0.91 nm3
Gas capacity (kg) 0.8 kg 1 bar = 14.5 psi
Acetone contents 1.6 kg 1 nm3 = 35.3 ft3
Volume 5l 1 kg = 2.2 lbs
Saturation gas 0.1 kg
Cylinder type A-5
Function GAS WELDING
227
MA
MARRINE P
PRRODUCTS Gases
Oxygen
OXYGEN O
O--40 F
FIL
ILL
LING
711 905034
Features
Colourless, odourless and tasteless
It is approximately 1.1 times heavier than air
Oxygen itself is non-ammable, but it supports
combustion
It can cause re or explosion in combustible
materials
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Height 1360 mm
Weight 60 kg
Design Pressure 150 bar
Colour BLUE
Pressure 150 bar
Hydrostatic Test Pressure 225 bar
Diameter 230 mm
Tare weight 52 kg
Gross weight 60 kg
Gas capacity (nm3) 6.4 m3
Gas capacity (kg) 7.8 kg
Volume 40 l
Purity 99,5%
Cylinder type O-40
228
MA
MARRINE P
PRRODUCTS Gases
Oxygen
OXYGEN O
O--5 F
FIL
ILL
LING
713 905075
Features
Colourless, odourless and tasteless
It is approximately 1.1 times heavier than air
Oxygen itself is non-ammable, but it supports
combustion
It can cause re or explosion in combustible
materials
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Height 620 mm
Weight 12 kg
Colour BLUE
Pressure 200 bar
Diameter 140 mm
Connection size/type W 21.8 MM X 1/14"
Gross weight 13 kg
Gas capacity (nm3) 1 m3
Gas capacity (kg) 1.3 kg
Volume 5l
Cylinder type O-5
229
MA
MARRINE P
PRRODUCTS Gases
Nitrogen
NIT
NITRROGEN N-
N-5050
5050 F
FIL
ILL
LING
717 905601
Features
Nitrogen is a colourless, odourless and tasteless
Non-combustible and non-toxic
Slightly lighter than air and it's an inert gas
The composition is: Nitrogen 5.0: >99.999%
Nitrogen is well suited for purging or ushing cargo
tanks and pipelines of residual gases and vapours
prior to loading cargo
It is also used as a 'blanket' on top of several types
of cargoes to prevent reactions with oxygen from
atmospheric air
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Length 1690 mm
Colour GREEN/ORANGE
Pressure 200 bar
Diameter 230 mm
Connection size/type W24.32 MM X 1/14"
Tare weight 81 kg
Gross weight 92 kg
Gas capacity (nm3) 10.2 m3
Gas capacity (kg) 11.5 kg
Volume 50 l
Purity 99.999%
Cylinder type N-5050
Function INERTING
230
MA
MARRINE P
PRRODUCTS Gases
Nitrogen
NIT
NITRROGEN N-
N-50
5030
30 F
FIL
ILL
LING
714 905208
Features
Nitrogen is a colourless, odourless and tasteless
Non-combustible and non-toxic
Slightly lighter than air and it's an inert gas
Nitrogen is well suited for purging or ushing cargo
tanks and pipelines of residual gases and vapours
prior to loading cargo
It is also used as a 'blanket' on top of several types
of cargoes to prevent reactions with oxygen from
atmospheric air
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Length 1690 mm
Colour GREEN
Pressure 200 bar
Diameter 230 mm
Connection size/type W24.32 MM X 1/14"
Tare weight 81 kg
Gross weight 92 kg
Gas capacity (nm3) 10.2 m3
Gas capacity (kg) 11.5 kg
Volume 50 l
Purity 99.9%
Cylinder type N-5030
Function INERTING
231
MA
MARRINE P
PRRODUCTS Gases
Nitrogen
NIT
NITRROGEN N-
N-1050
1050 F
FIL
ILL
LING
717 905602
Features
Nitrogen is colourless, odourless and tasteless
Non-combustible and non-toxic
Slightly lighter than air and it's an inert gas
The composition is: Nitrogen 5.0: >99.999%
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Length 1000 mm
Colour GREEN/ORANGE
Pressure 200 bar
Diameter 140 mm
Connection size/type W24.32 MM X 1/14"
Tare weight 18 kg
Gross weight 20 kg
Gas capacity (nm3) 2 m3
Gas capacity (kg) 2.3 kg
Volume 10 l
Purity 99.999%
Cylinder type N-1050
Function ANALYSIS
232
MA
MARRINE P
PRRODUCTS Gases
Nitrogen
NIT
NITRROGEN N-
N-10
1030
30 F
FIL
ILL
LING
714 905232
Features
Nitrogen is colourless, odourless and tasteless
Non-combustible and non-toxic
Slightly lighter than air and it's an inert gas
It's well suited for purging or ushing cargo tanks
and pipelines of residual gases and vapours prior to
loading cargo
It is also used as a 'blanket' on top of several types
of cargoes to prevent reactions with oxygen from
atmospheric air
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Length 1000 mm
Colour GREEN
Pressure 200 bar
Diameter 140 mm
Connection size/type W24.32 MM X 1/14"
Tare weight 18 kg
Gross weight 20 kg
Gas capacity (nm3) 2 m3
Gas capacity (kg) 2.3 kg
Volume 10 l
Purity 99.9%
Cylinder type N-1030
Function INERTING
233
MA
MARRINE P
PRRODUCTS Gases
Cruise gas
PROPANE P
P--5 F
FIL
ILL
LING
719 905615
Features
Propane is a colourless gas found in natural gas and
petroleum
Highly ammable
Propane cylinders are tted with American valves;
adaptors are available- Adaptor with product no.
625483 enables lling or use when the European
W21.8 LH is needed
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Length 330 mm
Colour OFF WHITE
Diameter 203 mm
Connection size/type CGA 510
Tare weight 4.5 kg
Gross weight 7 kg
Gas capacity (kg) 2.26 kg
Volume 6l
Cylinder type P-5
Function FUEL GAS
234
MA
MARRINE P
PRRODUCTS Gases
Cruise gas
HE
HELLIU
IUMM H-
H-40
40 F
FIL
ILL
LING
719 905618
Features
Colourless, odorless inert gaseous element occurring
in natural gas
Helium is used as a component of articial
atmospheres including lifting gas for balloons
A special balloon ll regulator (Product no. 698
624434) is available
One cylinder Helium H-40 is lled to 200 bar resulting
in 7.5 m3 of gas
One cylinder Helium H-40 lls on average 375
balloons
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number.
We trace and track all cylinders using the UniTrak system to give you peace of mind.
Technical data
Length 1350 mm
Colour ORANGE BROWN
Pressure 200 bar
Diameter 230 mm
Connection size/type W24.32 mm X 1/14"
Tare weight 55 kg
Gross weight 57 kg
Gas capacity (nm3) 7.5 m3
Gas capacity (kg) 1.23 kg
Volume 40 l
Cylinder type H-40
Function LEISURE GAS
235
MA
MARRINE P
PRRODUCTS Gases
Cruise gas
CARBON D
DIO
IOX
XID
IDE
EFFIL
ILLLING
Features
Colourless, odorless and an incombustible gas
CO2 cylinders are tted with handwheel operated
valves and an American type side connection
A regulator for this type of cylinder is available under
product no. 698 510004
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Ordering information
Product number Product name
905619 CARBON DIOXIDE C-9 FILLING
905695 CARBON DIOXIDE C-27 FILLING
236
MA
MARRINE P
PRRODUCTS Gases
Cruise gas
NIT
NITRROGEN F
FOOOD G
GRRADE N-
N-10F
10FGGF
FIL
ILL
LING
719 905679
Features
For draught beers which need nitrogen (N2) in
combination with carbon dioxide (CO2)
Results in a more smooth taste and a ner dispersed
head on top of the beverage
Food grade nitrogen has a purity of 99.995% (4.5
purity)
Food grade nitrogen conforms to E961 (food
additive) or similar standard (BS4105)
Regulator 510 Nitrogen is used for N-10FG cylinder,
available under product number 510002
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Length 1000 mm
Colour GREEN/BLACK
Pressure 200 bar
Diameter 140 mm
Connection size/type W24.32 mm X 1/14"
Tare weight 18 kg
Gross weight 20 kg
Gas capacity (nm3) 2 m3
Gas capacity (kg) 2.3 kg
Volume 10 l
Purity 99.995%
Cylinder type N-10FG
Function BEVERAGES
237
MA
MARRINE P
PRRODUCTS Gases
Breathing oxygen
BREATHING O
OX
XYGEN MO
MOX
X-2 F
FIL
ILL
LING
719 905638
Features
Breathing Oxygen cylinders are tted with Yoke-type/
PISS valves, which are familiar to the majority of
users
The lling pressure is lower than the normal 200 bar
in some locations due to local rules and regulations
that limit lling pressure
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Length 415 mm
Colour GREEN/WHITE
Pressure 200 bar
Diameter 102 mm
Connection size/type CGA870 / PISS ISO407
Tare weight 2.9 kg
Gross weight 3.4 kg
Gas capacity (nm3) 0.43 m3
Gas capacity (kg) 0.52 kg
Volume 2l
Cylinder type MOX-2
Function MEDICAL
238
MA
MARRINE P
PRRODUCTS Gases
Breathing oxygen
BREATHING O
OX
XYGEN MO
MOX
X-5 F
FIL
ILL
LING
719 905616
Features
Breathing Oxygen cylinders are tted with Yoke-type/
PISS valves, which are familiar to the majority of
users
The lling pressure is lower than the normal 200 bar
in some locations due to local rules and regulations
that limit lling pressure
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Length 690 mm
Colour GREEN/WHITE
Pressure 200 bar
Diameter 106 mm
Connection size/type CGA870 / PISS ISO407
Tare weight 6.6 kg
Gross weight 7.9 kg
Gas capacity (nm3) 1 m3
Gas capacity (kg) 1.3 kg
Volume 5l
Cylinder type MOX-5
Function MEDICAL
239
MA
MARRINE P
PRRODUCTS Gases
Breathing oxygen
BREATHING O
OX
XYGEN MO
MOX
X-40 F
FIL
ILL
LING
719 905617
Features
Breathing Oxygen cylinders are tted with Yoke-type/
PISS valves, which are familiar to the majority of
users
The lling pressure is lower than the normal 200 bar
in some locations due to local rules and regulations
that limit lling pressure
MOX-40 lled cylinder is also used for ships
transporting dangerous goods according to the
IMDG which are required to have this type of oxygen
onboard for emergencies
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak system to give you peace of mind
Technical data
Length 1210 mm
Colour GREEN/WHITE
Pressure 200 bar
Diameter 229 mm
Connection size/type CGA870 / PISS ISO407
Tare weight 55 kg
Gross weight 66 kg
Gas capacity (nm3) 8.6 m3
Gas capacity (kg) 10.4 kg
Volume 40 l
Cylinder type MOX-40
Function MEDICAL
240
MA
MARRINE P
PRRODUCTS Gases
Argon
ARGON E
E--50 F
FIL
ILL
LING
715 905174
Features
Argon is a colourless and odourless gas
Argon is slightly heavier than air and is an inert gas
It's non-toxic and non-combustible
It's used as a shielding gas for welding, primarily to
protect the molten pool against contaminants in the
atmosphere
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Height 1690 mm
Colour GREY
Pressure 200 bar
Diameter 230 mm
Connection size/type W24.32 MM X 1/14"
Tare weight 81 kg
Gross weight 99 kg
Gas capacity (nm3) 11 m3
Gas capacity (kg) 18 kg
Volume 50 l
Cylinder type E-50
Function WELDING
241
MA
MARRINE P
PRRODUCTS Gases
Argon
ARGON E
E--10 F
FIL
ILL
LING
715 905565
Features
Argon is a colourless and odourless gas
Argon is slightly heavier than air and is an inert gas
It's non-toxic and non-combustible
It's used as a shielding gas for welding, primarily to
protect the molten pool against contaminants in the
atmosphere
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Technical data
Height 1000 mm
Colour GREY
Pressure 200 bar
Diameter 140 mm
Connection size/type W24.32 MM X 1/14"
Tare weight 18 kg
Gross weight 22 kg
Gas capacity (nm3) 2.2 m3
Purity 5.0
Cylinder type E-10
Function WELDING
242
MA
MARRINE P
PRRODUCTS Gases
Argon
UNIMIX 20 M-
M-10
10 F
FIL
ILL
LING
715 905573
Features
Argon-CO2 mix is a colourless and odourless gas
Argon-CO2 mix is slightly heavier than air and is an
inert gas
Argon-CO2 mix is non-combustible
It's used as a shielding gas for welding, primarily to
protect the molten pool against contaminants in the
atmosphere
80% Argon/20% CO2 mix is suitable for welding all
un/low alloyed carbon steels
Unimix gives a very stable molten pool together with
optimum energy-transmission
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak system to give you peace of mind
Technical data
Height 1000 mm
Colour GREY/YELLOW
Pressure 200 bar
Diameter 140 mm
Connection size/type W24.32 MM X 1/14"
Tare weight 18 kg
Gross weight 21 kg
Gas capacity (nm3) 2.2 m3
Gas capacity (kg) 3.4 kg
Volume 10 l
Cylinder type M-10
Function WELDING
243
MA
MARRINE P
PRRODUCTS Gases
Argon
UNIMIX 20 M-
M-50
50 F
FIL
ILL
LING
715 905581
Features
Argon-CO2 mix is a colourless and odourless gas
Argon-CO2 mix is slightly heavier than air and is an
inert gas
Argon-CO2 mix is non-combustible
It's used as a shielding gas for welding, primarily to
protect the molten pool against contaminants in the
atmosphere
80% Argon/20% CO2 mix is suitable for welding all
un/low alloyed carbon steels
Unimix gives a very stable molten pool together with
optimum energy-transmission
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak system to give you peace of mind
Technical data
Height 1690 mm
Colour GREY/YELLOW
Pressure 200 bar
Diameter 230 mm
Connection size/type W24.32 mm X 1/14"
Tare weight 81 kg
Gross weight 98 kg
Gas capacity (nm3) 10.9 m3
Gas capacity (kg) 17.1 kg
Volume 50 l
Cylinder type M-50
Function WELDING
244
MA
MARRINE P
PRRODUCTS Spangases
Nitrogen mixtures
AMMO
MMONIA
NIA
Features
Rellable SG10 cylinder
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Ordering information
Product number Product name
588954 AMMONIA IN N2 35% LEL
588947 AMMONIA IN AIR 35% LEL
245
MA
MARRINE P
PRRODUCTS Spangases
Nitrogen mixtures
O2 IN NIT
NITRROGEN IN S
SGG10 C
CYYLIND
INDEER
Features
Rellable SG10 cylinder
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Ordering information
Product Number Product name
620179 O2 0.5% IN NITROGEN
589051 O2 1% IN N2 99%
589044 O2 2% IN N2 98%
620146 5 % OXYGEN IN NITROGEN
589135 O2 8% IN N2 92%
246
MA
MARRINE P
PRRODUCTS Spangases
Nitrogen mixtures
CO2 IN NIT
NITRROGEN/A
N/AIR
IR IN S
SGG10 C
CYYLIND
INDEER
Features
Rellable SG10 and SG50 cylinder
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Ordering information
Product number Product name
657973 CO2 0.3% IN 99.7% NITROGEN
905661 CO2 1% IN N2 99%
620104 CO2 2.5% IN AIR
589127 CO2 5% IN N2 95% SG10
592584 CO2 5% IN N2 95% SG50
247
MA
MARRINE P
PRRODUCTS Spangases
Nitrogen mixtures
ETHA
HANO
NOL
L
Features
Rellable SG10 cylinder
Benets
For your safety, the product is delivered in a Unitor
cylinder complete with barcode and unique cylinder
serial number
We trace and track all cylinders using the UniTrak
system to give you peace of mind
Ordering information
Product number Product name
682369 ETHANOL 250 PPM IN N2
782549 ETHANOL IN N2 450 PPM SP
248
MA
MARRINE P
PRRODUCTS Spangases
Disposables
MINIMIX D
DIS
ISP
POSABLE C
CYYLIND
INDEERS
Ordering information
Product Number Product name
782161 AMMONIA 50 PPM IN AIR (SCOTTY 58)
619973 MINIMIX PURE NITROGEN
620070 MINIMIX 2% METHANE IN AIR
625798 MINIMIX O2 2% IN 98% N2
635375 MINIMIX O2 5% IN 95% N2
630343 MINIMIX O2 19% IN N2
619999 MINIMIX CO2 2% IN NITROGEN
619965 MINIMIX 2.5% METHANE-AIR
711952 MINIMIX METHANE 50% VOL. IN N2
620021 MINIMIX 0.6% PROPANE -AIR
739441 MINIMIX PROPANE 1,01% IN AIR
619957 MINIMIX BUTANE 0.9% IN AIR
619932 MINIMIX ISOBUTANE 0.9%AIR
620062 MINIMIX 8% BUTANE 15% CO2
620054 MINIMIX 0.75%PENTANE-AIR
620039 MINIMIX CARBON MONOXIDE
620189 MINIMIX CARBON MONOXIDE
635367 MINIMIX CARBON MONOXIDE
620138 HYDROGEN SULPHIDE/N2 25 PPM (S 58)
734772 4-MIX 250 CO 15 H2S 50LEL CH4 18 OX
741306 4-MIX 50 CO 25 H2S 50LEL CH4 18 OX
249
MA
MARRINE P
PRRODUCTS Spangases
LEL mixtures
LEL MIX
MIXTTURES
Features
Rellable SG10 cylinder
Benets
These products are delivered in a Unitor cylinder with
its barcode and unique cylinder serial number
All cylinders are traced and tracked using the UniTrak
system
Ordering information
Product number Product name
718437 METHANE 10% LEL IN NITROGEN
656371 METHANE 30% LEL IN NITROGEN
620153 METHANE 30% LEL IN AIR
619940 METHANE 40% LEL IN N2
620005 METHANE 40% LEL IN AIR
589085 METHANE IN AIR 50% LEL
656363 METHANE 60% LEL IN NITROGEN
656330 METHANE 60% LEL IN AIR
682344 METHANE IN N2 80% LEL
664243 METHANE 5 VOL% IN N2
682328 METHANE 6.6 VOL% IN N2
656389 METHANE 30 VOL% IN NITROGEN
673715 METHANE IN NITROGEN 50% VOL
682351 METHANE 80 VOL% IN N2
682336 METHANE 99.995 VOL%
589028 ETHYLENE IN N2 35% LEL
589101 ETHYLENE IN AIR 35% LEL
250
Product number Product name
588996 PROPANE IN N2 35% LEL
588988 PROPANE IN AIR 35% LEL
620096 PROPANE 40% L.E.L. IN AIR
620047 PROPANE 50% L.E.L. IN AIR
682393 PROPANE PURE 99.5 %
589077 PROPYLENE IN AIR 35% LEL
589143 BUTANE IN AIR 30% LEL
588962 BUTANE IN AIR 35% LEL
588970 BUTANE IN N2 35% LEL
620161 BUTANE 8%VOL,15%CO2 IN N2
712133 BUTYLENE IN AIR 100PPM
589036 BUTYLENE IN AIR 35% LEL
589119 BUTADINE IN N2 35% LEL
620112 ISOBUTANE IN AIR 50% LEL = 0,95%
682377 PENTANE 49% LEL AIR SG10
251
MA
MARRINE P
PRRODUCTS Spangases
LEL mixtures
PENT
NTA
ANE 4 49%
9% L
LEEL IN A
AIR
IR C
C5H12
5H12 ((0
0.68% V
VO
OL) IN
SG50 C
CYYLIND
INDEER
718 682385
Features
Rellable SG50 cylinder
Composition: 0.68% pentane (C5H12), balance is air.
Equals 49% L.E.L. mixture
Benets
This product is delivered in a Unitor cylinder with its
barcode and unique cylinder serial number
All cylinders are traced and tracked using the UniTrak
system
252
MA
MARRINE P
PRRODUCTS Spangases
Regulators
REGULATOR R
R--510 F
FOOR S
SPPANG
NGAAS S
SGG10 C
CYYLIND
INDEERS
630 510011
The regulator R-510 is equiped with a owmeter (0 - 1.3 l/min) and ts all SG10 cylinders.
Features
Inlet pressure 200 bar
Fixed outlet pressure
Adjustable ow 1.3 L per minute
REGULATOR F
FOOR S
SCCOTTY 58/V
58/VII D
DIS
ISP
P. C
CYYLIND
INDEER
718 620013
Features
Fits on disposable Scotty 58 + VI cylinder
Fixed ow and xed outlet pressure
REGULATOR F
FOOR MINIMIX D
DIS
ISP
POSABLE C
CYYLIND
INDEER
718 620088
Features
Fits on disposable Minimix cylinder
Fixed ow and xed outlet pressure
BRACKET F
FOOR S
SGG10 C
CYYLIND
INDEER
718 619981
A wall-mountable bracket to secure a spangas 10 litre cylinder (SG10) in a professional and safe way.
253
MA
MARRINE P
PRRODUCTS Refrigerants
Hycool marine
HY
HYC
COOL MA
MARRINE 45
Thermal transfer uid used in secondary loop solutions such as air conditioning systems, low
temperature systems, process cooling and heat recovery systems.
Features
Wide application range +50
Benets
Ready to use solution does not need to be diluted
Low energy cost due to low viscosity
High thermal conductivity gives high volumetric cooling/ heating capacity
Ordering information
Product number Product name Volume in litres
708503 HYCOOL MARINE 45 200L DRUM 200
708511 HYCOOL MARINE 45 25L CAN 25
729871 HYCOOL MARINE 45 1000L IBC 1000
HY
HYC
COOL B
BLLUE A
ADDDIT
ITIV
IVE
E 25 L C
CAAN
605 708495
Features
A leak is easily detected through blue coloured stains
Benets
Reduces risk of system male functioning due to undetected leaks
Technical data
Volume 25 l
Packing, Type CAN
254
MA
MARRINE P
PRRODUCTS Refrigerants
R-134a
UNIC
NICO
OOL R
R--134A 5
57
7KKG
GRRE
EFRIG
IGEERANT
592 905557
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine refrigerant from approved
producer
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product Number Product name
905557 UNICOOL R-134a 57KG REFRIGERANT
255
MA
MARRINE P
PRRODUCTS Refrigerants
R-134a
UNIC
NICO
OOL R
R--134A 12.
12.55K
KG
GRRE
EFRIG
IGEERANT
592 905620
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine refrigerant from approved
producer
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product Number Product name
905620 UNICOOL R-134a 12.5 KG REFRIGERANT
256
MA
MARRINE P
PRRODUCTS Refrigerants
R-22
UNIC
NICO
OOL R
R--22 5
57
7KKG
GRRE
EFRIG
IGEERANT
591 905059
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine refrigerant from approved
producer
Benets
Worldwide compliance
Assured quality
Rellable cylinders
257
MA
MARRINE P
PRRODUCTS Refrigerants
R-22
UNIC
NICO
OOL R
R--22 12.
12.55K
KG
GRRE
EFRIG
IGEERANT
591 905621
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine virgin refrigerant from
approved producer
Benets
Worldwide compliance
Assured quality
Rellable cylinders
258
MA
MARRINE P
PRRODUCTS Refrigerants
R-404A
UNIC
NICO
OOL R
R--404A 45 K
KG
GRRE
EFRIG
IGEERANT
594 905606
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine virgin refrigerant from
approved producer
A long term replacement for R-502 and R-22
Most suitable for new systems
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product number Product name
905606 UNICOOL R-404A 45 KG REFRIGERANT
259
MA
MARRINE P
PRRODUCTS Refrigerants
R-404A
UNIC
NICO
OOL R
R--404A 9
9..5 K
KG
GRRE
EFRIG
IGEERANT
594 905623
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine virgin refrigerant from
approved producer
A long term replacement for R-502 and R-22
Most suitable for new systems
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product number Product name
905623 UNICOOL R-404A 9.5 KG REFRIGERANT
260
MA
MARRINE P
PRRODUCTS Refrigerants
R-407C
UNIC
NICO
OOL R
R--40
407C
7C 5
522K
KG
GRRE
EFRIG
IGEERANT
594 905607
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine refrigerant from approved
producer
Suitable for new systems and retrots
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product Number Product name
905607 UNICOOL R-407C 52 KG REFRIGERANT
261
MA
MARRINE P
PRRODUCTS Refrigerants
R-407C
UNIC
NICO
OOL R
R--40
407C
7C 11 K
KG
GRRE
EFRIG
IGEERANT
594 905624
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine refrigerant from approved
producer
Suitable for new systems and retrots
Benets
Worldwiide compliance
Assured quality
Rellable cylinders
Ordering information
Product Number Product name
905624 UNICOOL R-407-C 11 KG REFRIGERANT
262
MA
MARRINE P
PRRODUCTS Refrigerants
R-410A
R-410A 45 K
KG
GRRE
EFRIG
IGEERANT
594 905608
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine refrigerant from approved
producer
For new systems only
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Technical data
Contents 56 LITRE
Weight 45 kg
Colour ROSE
Ordering information
Product Number Product name
905608 UNICOOL R-410A 45 KG REFRIGERANT
263
MA
MARRINE P
PRRODUCTS Refrigerants
R-410A
R-410A 9
9..5 K
KG
GRRE
EFRIG
IGEERANT
594 905627
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine refrigerant from approved
producer
For new systems only
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product Number Product name
905627 UNICOOL R-410A 9.5 KG REFRIGERANT
264
MA
MARRINE P
PRRODUCTS Refrigerants
R-417A
UNIC
NICO
OOL R
R--417A 51 K
KG
GRRE
EFRIG
IGEERANT
593 905637
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine virgin refrigerant from
approved producer
Long term replacement for R-22 and WSS prefered
retrot solution
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product number Product name
905637 UNICOOL R-417A 51KG REFRIGERANT
265
MA
MARRINE P
PRRODUCTS Refrigerants
R-417A
UNIC
NICO
OOL R
R--417A 11 K
KG
GRRE
EFRIG
IGEERANT
593 905705
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine virgin refrigerant from
approved producer
Long term replacement for R-22 and WSS prefered
retrot solution
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product number Product name
905705 UNICOOL R-417A 11KG REFRIGERANT
266
MA
MARRINE P
PRRODUCTS Refrigerants
R-422D
UNIC
NICO
OOL R
R--422D 5
522K
KG
GRRE
EFRIG
IGEERANT
593 905710
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine virgin refrigerant from
approved producer
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Ordering information
Product Number Product name
905710 UNICOOL R-422D 52 KG REFRIGERANT
267
MA
MARRINE P
PRRODUCTS Refrigerants
R-427A
UNIC
NICO
OOL R
R--42
427A
7A 5
533K
KG
GRRE
EFRIG
IGEERANT
593 905708
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine virgin refrigerant from
approved producer
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product number Product name
905708 UNICOOL R-427A 53 KG REFRIGERANT
268
MA
MARRINE P
PRRODUCTS Refrigerants
R-507
UNIC
NICO
OOL R
R--50
507
7 45 K
KG
GRRE
EFRIG
IGEERANT
594 905610
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine virgin refrigerant from
approved producer
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product number Product name
905610 UNICOOL R-507 45 KG REFRIGERANT
269
MA
MARRINE P
PRRODUCTS Refrigerants
R-507
UNIC
NICO
OOL R
R--50
507
799..5 K
KG
GRRE
EFRIG
IGEERANT
594 905628
Features
All rellable cylinders are inspected prior to relling
Residue refrigerant recovered to prevent
environmental damage
Content is 100% genuine virgin refrigerant from
approved producer
Benets
Worldwide compliance
Assured quality
Rellable cylinders
Ordering information
Product number Product name
905628 UNICOOL R-507 9.5 KG REFRIGERANT
270
MA
MARRINE P
PRRODUCTS Refrigerants
Refrigerant recovery cylinders
RECOVERY C
CYYLIND
INDEER 21,
21,66L+D
DOOCUME
MENT
NTS
S
599 596544
Features
21.6 L - 50 lbs cylinder
USDOT 4BA400
Two connection ports to enable charging of liquid
and extraction of vapour simultaneously
Connection is 1/4" are SAE
Cylinder supplied under vacuum
Cylinder is clearly identied for 'RECOVERY'
Comes with a complete documentation kit including
transport label
Benets
Easy to carry
Delivered with lling guideline to protect against over
charging
Includes transport labels specied by USA DOT
(Dept of Transportation)
Technical data
271
MA
MARRINE P
PRRODUCTS Refrigerants
Refrigerant recovery cylinders
RECOVERY C
CYYLIND
INDEER 56 L + D
DOOCUME
MENT
NTS
S
599 632588
Features
56 L - 123 lbs cylinder
USDOT 4BW400
Two connection ports to enable charging of liquid
and extraction of vapour simultaneously
Connection is CGA 660
Valve equiped with special diptube to prevent
overlling
Cylinder supplied under vacum
Cylinder is clearly identied for 'RECOVERY'
Comes with a complete documentation kit including
transport label
Benets
Delivered with lling guideline to protect against over
charging
Includes transport labels specied by the USA DOT
(Dept of Transportation)
Technical data
272
MA
MARRINE P
PRRODUCTS Gas distribution system
Complete installations for Ox/Ac
CENT
NTRRAL INS
INSTTALLATIO
IONNF
FOOR A
AC
CETYLENE +
OXYGEN
Features
Includes all items necessary for the gas central room, including signs, racks, equipment and brackets to be screwed
or welded to deck and bulkhead
Included are also pre-welded unions to be welded to the distribution pipes, and brazed to the evacuation pipes from
the regulator safety valves
Gas cylinders, cylinder trolley, clamps, bushings and outlet stations should be ordered separately in necessary
quantities.
If the central is to be placed in two separate rooms, one each for Acetylene and Oxygen respectively, one each of
signs product no. 183202, 526566 and 526558 are needed.
Benets
Increases safety
Cylinders are less subject to physical damage
Location of cylinders is known to everyone onboard
Cylinders can easily be removed in case of re onboard
No cylinder transport to the worksite needed
Ordering information
Product number Product name
233064 GAS DISTR. SYST. 2CYL. 1AC + 1OX.
234849 GAS DISTR. SYST. 4CYL. 2AC + 2OX.
510578 GAS DISTR. SYST. 6CYL. 2AC + 4OX.
511170 GAS DISTR. SYST. 3CYL. 1AC + 2OX.
273
MA
MARRINE P
PRRODUCTS Gas distribution system
Cylinder racks
RACK F
FOOR C
CYYLIND
INDEERS
Features
Designed for safe and vibration-free storing of 40 L and 50 L gas cylinders on board
The racks are galvanized for maximum corrosion protection
Screw and nut in the clamp assembly are of stainless steel to ensure easy and fast removal of the cylinders in case of
re
Ordering information
Product name Product number
RACK FOR 2 CYLINDERS. 176297
RACK FOR 1 CYLINDER. 320358
274
MA
MARRINE P
PRRODUCTS Gas distribution system
Gas cylinder cabinets
GAS C
CYYLIND
INDEER C
CAABINE
INETT
Gas cylinders should be stored in a room(s) on or above the uppermost continuous deck, with direct
access to open deck. As a solution in cases where it is difcult to reserve separate room(s) for the
cylinders, WSS offers specially designed Unitor steel cabinets for mounting on deck.
Features
The cabinets are available in two sizes: for two or for four cylinders
The cabinets can be tted with gas accessories to form a complete cylinder central as to drawings
Cylinder racks are tted in the cabinets for the maximum number of cylinders as standard
3 mm steel plate is used for the construction of the cabinets
Lifting lugs and ears for fastening the cabinet to the bulkhead are included
The door fastener is prepared for padlocking
The cabinets are shot blasted and primed with zinc compound
Final painting should be done when mounted, to match the colour of the surrounding bulkheads
Benets
Safe storage of cylinders
Increased storage space
Fits on every type of ship
Ordering information
Product number Product name
576561 CABINET FOR 2 CYLINDERS
536763 CABINET FOR 2 CYLINDERS.
576579 CABINET FOR 4 CYLINDERS
536755 CABINET FOR 4 CYLINDERS
275
MA
MARRINE P
PRRODUCTS Gas distribution system
High pressure components
HIG
HIGHHP
PRRESSURE C
COOMP
MPOONE
NENT
NTS
S
Ordering information
Product number Product name
305292 High pressure hose oxygen
520403 High pressure hose acetylene
303198 T-valve for oxygen w bracket and non-return valve
520379 T-valve for acetylen w bracket and non-return valve
302547 Blind plug for T-valve
302539 Connection nut oxygen 1/4"
517078 Connection nut acetylene 1/4"
302505 High pressure expansion pipe oxygen
517086 High pressure expansion pipe acetylene
302992 Closing valve oxygen with bracket
520395 Closing valve acetylene with bracket
511089 Non return valve for oxygen T-valve
520387 Non return valve for acetylene T-valve
276
MA
MARRINE P
PRRODUCTS Gas distribution system
Low pressure components
LOW P
PRRESSURE C
CO
OMP
MPO
ONE
NENT
NTSSS
SPPARE P
PA
ARTS
Ordering information
Product number Product name
510020 Regulator R-520 for acetylene
510021 Regulator R-520 for oxygen
621565 Low pressure expansion pipe with pre-welded unions for acetylene
621573 Low pressure expansion pipe with pre-welded union for oxygen
585372 Flashback arrestor, in line, for acetylene
682427 Flashback arrestor, in line, for oxygen
320226 Pipe clamp for 20 mm pipes
624684 Bushing for 19.5-23 mm pipe
277
MA
MARRINE P
PRRODUCTS Gas distribution system
Low pressure components
LEAK D
DEETECTIO
IONNS
SPPRAY 300 ML
610 576389
The leak test solution should be applied to ALL joints. Do not use the equipment until the leak has been
rectied
Apply the leak detect solution to joints and any Ensure the area is dry by wiping with a clean lint free
potential leakage points, such as at the point of cloth after the check has been completed
connection of the cylinder valve with the regulator Once the leak has been rectied, re-purge air from
You should never apply leak test solution into a the system prior to use
cylinder valve outlet
If there is any frothing, the system should be
immediately depressurised and the leak corrected
278
MA
MARRINE P
PRRODUCTS Gas distribution system
Outlet station
OUTLET S
STTATIO
IONN7
700
00 C
CO
OMP
MPL
LETE W
WIT
ITH
HSS55
55
FLASHB
HBAACK R
REEGULATORS A AND
ND S
STTEEL C
CAABINE
INETT
611 550277
OUTLET SST
TATIO
ION
N7700
00 W
WIT
ITH
HSST
TEEL C
CAABINE
INETTB
BUUT
WIT
ITHO
HOU
UT F
FLLASHB
HBA
ACK A
ARRRESTORS
611 550301
279
MA
MARRINE P
PRRODUCTS Gas distribution system
Outlet station
STEEL C
CAABINE
INETTF
FOOR O
OUUTLET S
STTATIO
IONN7
700
00
610 550335
FIB
IBRRE G
GLLASS C
CAABINE
INETTF
FOOR O
OUUTLET S
STTATIO
IONN7
700
00
611 536805
280
MA
MARRINE P
PRRODUCTS Gas distribution system
Outlet station
ADAPTOR S
SEET F
FOOR O
OUUTLET S
STTATIO
IONN7
700
00
610 550327
TWIN V
VA
ALVE U
UNIT
NIT F
FOOR O
OUUTLET S
STTATIO
IONN7
700
00
610 550319
281
MA
MARRINE P
PRRODUCTS Gas distribution system
Outlet station
REGULATOR R
R--530 F
FOOR A
AC
CETYLENE
611 510030
REGULATOR R
R--530 F
FOOR O
OX
XYGEN
611 510031
282
MA
MARRINE P
PRRODUCTS Gas distribution system
Outlet station
STRETCH R
REELIE
IEFFB
BRRACKET F
FOOR T
TWWINHO
INHOSSE
611 235010
283
MA
MARRINE P
PRRODUCTS Gas distribution system
Shielding gas installations
SHIE
HIELLDING G
GAAS INS
INSTTALLATIO
IONNF
FOOR C
CYYLIND
INDEERS
The Gas Distribution System for shielding gases is designed to give our customers the highest
efciency and economy, and at the same time increasing the safety on board. The System is delivered
complete with manifold system with non-return valves, high pressure exible hoses, fastening racks for
cylinders, shut off valve, regulator, low pressure expansion pipe and a "Gas under pressure" sign. The
system is designed for a working pressure of 200 bar.
Ordering information
Product number Product name
593608 CENTRAL INST. SHIELDING
593616 CENTRAL INST. SHIELDING.
284
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!&'2*(&2"4*/.15*0-&.460%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!&'2*(&2"4*/.15*0-&.460%'9*%
93/52$&0"(&
MARINE PRODUCTS
REFRIGERATION EQUIPMENT
REFRIG
IGEERANT O
OIL
IL,, P
POOE, L
LO
OW T
TEEMP
MPEERATURE
605 587709
The Emkarate series is a range of synthetic refrigeration oils formulated from polyolester base stock.
They are specically designed for use with refrigeration systems using environmentally friendly HFC
refrigerants.
A range of different types and brand of refrigeration oils is available on request from the WSS Spare
Part Centres.
Features
The synthetic base stocks used in the Emkarate RL32 range are fully miscible with HFCs, even at temperatures well
below the minimum likely to be encountered in service.
Emkarate RL32 grades have been formulated using a unique low treatment additive package to enhance hydrolytic
stability, load carrying and inhibition against copper plating.
They are wax free and hence have very low pour points. This makes sure that evaporator internals remain clean
(consequently efcient heat transfer) and avoids pipe blockages.
Technical data This could be on an annual basis or more frequently if the oil
becomes dark or cloudy.
Packing Size 5 L CAN
A good rule is to renew the oil if a major service or repair has
TEV Manufacturer EMKARATE RL32
been carried out on the compressor or the system.
Emkarate RL32 is generally used for low temperature
Relative Density at 20 C 0.92 applications like provision systems. Compatible with all HFC
Viscosity at 40 C 32 refrigerants.
Viscosity at 45 C 5.5 The synthetic base stocks used in the Castrol Icematic SW
Viscosity Index 110 range are fully miscible with HFCs, even at temperatures well
Closed Flash Point, C 252 below the minimum likely to be encountered in service.
Pour Point, C -54 Emkarate grades have been formulated using a unique low
treatment additive package to enhance hydrolytic stability,
load carrying and inhibition against copper plating. They are
The compressor is the heart of any refrigeration system and
wax free and hence have very low pour points. This makes
it is recommended that the system oil is changed or tested
sure that evaporator internals remain clean (consequently
at regular intervals.
efcient heat transfer) and avoids pipe blockages.
288
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Lubricants
REFRIG
IGEERANT O
OIL
IL.. P
POOE, HIG
HIGHHT
TEEMP
605 587691
The Icematic SW series is a range of synthetic refrigeration oils formulated from polyolester base stock.
They are specically designed for use with refrigeration systems using environmentally friendly HFC
refrigerants.
Features
The synthetic base stocks used in the Castrol Icematic SW range are fully miscible with HFCs, even at temperatures
well below the minimum likely to be encountered in service.
Icematic SW grades have been formulated using a unique low treatment additive package to enhance hydrolytic
stability, load carrying and inhibition against copper plating.
They are wax free and hence have very low pour points. This makes sure that evaporator internals remain clean
(consequently efcient heat transfer) and avoids pipe blockages.
289
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Lubricants
REFRIG
IGEERANT O
OIL
IL,, MINE
MINERRAL, HIG
HIGHHT
TEEMP
605 664136
The Castrol range of mineral based refrigeration oils is available as two grades of specially selected oils,
highly rened to provide chemical and thermal stability. Low wax forming tendencies ensure low pour
points.
A range of different types and brands of refrigeration oils is available on request from WSS Spare Part
Centres.
Technical data This could be on an annual basis or more frequently if the oil
becomes dark or cloudy.
Packing Size 20 L
A good rule is to renew the oil if a major service or repair has
TEV Manufacturer CASTROL ICEMATIC 299
been carried out on the compressor or the system.
Icematic 299 is generally used for high temperature
Relative Density at 20 C 0.92 applications like A/C systems. Compatible with HCFC
Viscosity at 40 C 55.5 refrigerants like R-22 and some HFC refrigerants like Unicool
Viscosity at 100 C 5.94 R-417A.
Flash Point, C 183 Because of its low oc points and good solubility with
Pour Point, C -36 uorocarbon refrigerants, particularly R22, this oils have
virtually superseded the Icematic 99 oils in all marine
Floc Point, C -48 refrigeration systems.
Castrol Icematic 299 is approved to Carrier Specication
The compressor is the heart of any refrigeration system and
PP33-2 and PP36-1.
it is recommended that the system oil is changed or tested
at regular intervals.
290
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Package Equipment
UNIT
NITO
OR D
DRRINK
INKING
ING W
WA
ATER C
COOOLER, 230 V
607 708552
Features
Designed to operate under demanding climatic conditions
Stainless steel construction makes it corrosion resistant
Fittings in brass for longer service life
Includes instruction and spare part manual
CE approved
Benets
Silent operation
Uses environmental acceptable R-134a refrigerant
Technical data The Unitor Drinking Water Cooler is made to operate in the
most demanding climatic conditions. It is constructed of
Length 310 mm stainless steel, making it resistant to corrosion and easy to
Width 310 mm keep clean. Fittings are in brass for long service life. The unit
Height 1050 mm is silent in operation and runs on R-134a refrigerant that
functions in the medium pressure range, reducing wear and
Weight 22 kg
tear on the system.
Power supply Voltage 1PH. 230 V 50/60 Hz
Power Supply Amperage 2.6 A
Approvals
CE
291
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Package Equipment
UNIT
NITO
OR D
DRRINK
INKING
ING W
WA
ATER C
COOOLER, 115 V
607 711333
Features
Designed to operate under demanding climatic conditions
Stainless steel construction makes it corrosion resistant
Fittings in brass for longer service life
CE approved
Includes instruction and spare part manual
Benets
Silent operation
Uses environmental acceptable R-134a refrigerant
Technical data The Unitor Drinking Water Cooler is made to operate in the
most demanding climatic conditions. It is constructed of
Length 310 mm stainless steel, making it resistant to corrosion and easy to
Width 310 mm keep clean. Fittings are in brass for long service life. The unit
Height 1050 mm is silent in operation and runs on R-134a refrigerant that
functions in the medium pressure range, reducing wear and
Weight 22 kg
tear on the system.
Power supply Voltage 1PH. 110 V 50/60 Hz
Power Supply Amperage 5.1 A
Approvals
CE
292
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
REFRIG
IGEERANT C
CHA
HAR
RGING S
STTATIO
IONNU
UCCS-200
601 625186
Features
Replaceable drier core
Connection for vacuum pump and recovery unit
Sight glass to monitor ow and refrigerant condition
Non-return valve to prevent back ow into cylinder
Relief valve to protect against high pressure
Steel pipe and rigid construction
Complies with environmental regulations
Benets
Simple layout
Easy to operate
Safe process control
Accessories
Product number Product name
548255 LIQUID LINE DRIER CORE 48 DN.
548206 FILTER DRIER SHELL-7/8.
650349 CHECK VALVE 1/2 INCH.
649726 RELIEF VALVE 350PSI.
650055 STOP VALVE (ANGLE).
650020 STOP VALVE (ANGLE).
522441 REDUCER FEMALE X MALE.
564591 CAP NUT 1/4" FLARE N5-4.
650993 FLARE TO SOLDER CONNECTOR.
510933 COPPER GASKET.
651077 MOISTURE INDICATOR INSERT.
293
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
LIQ
IQUUID L
LINE
INE D
DRRIE
IERRC
COORE 48 D
DNN
604 548255
Technical data
Length 138 mm
Diameter 95 mm
Inside Diameter 44 mm
TEV type DCR 48DN
CHA
HARRGING HO
HOSSE HP 13
1350
50 MM
601 510826
Features
Stainless steel braiding for added strength
1350 mm length
Snap on connections
294
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
CYLIND
INDEER S
STTAND
601 513564
Features
Cylinders are secured free from the deck by two
clamps Clamps are of quick release type to ensure
timely removal of cylinders in case of emergency
Hot dip galvanized steel
Fits all WSS Unicool 56 L refrigerant cylinders
TOP V
VAALVE A
ADDAPTOR S
SEET F
FOOR U
UNIC
NICO
OOL
REFRIG
IGE
ERANT CCY
YLIND
INDEERS U
UVVA-00
0011
601 544932
Features
Package with 4 adaptors: two 1/4" SAE are and
two 3/8" SAE are
O-ring included
Technical data
295
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
COLLECTIO
IONNO
OFFF
FIT
ITT
TING
INGS
S, 1/
1/4
4-3
3//8"
601 636431
Features
Comprehensive selection
Benets
Handy for repairs or system maintenance
Ordering information
Supplied with:
Plug P2 4, 1/4" are (3 pcs)
Union TEE T2-4, 1/4" are (3 pcs)
Reducing Union TEE TR2-64, 3/8" + 3/8" x 1/4" (1 pc)
Reducing Union TEE TR2-84, 1/2" + 1/2" x 1/4" (1 pc)
Connector U3-4A female, 1/4" x 1/8" pipe thread (1 pc)
Connector U3-4B female, 1/4" x 1/4" pipe thread (1 pc)
Connector U3-6B female, 3/8" x 1/4" pipe thread (2 pc)
TEE T 6-4, 2 x 1/4" male, 1 x 1/4" female (1 pc)
Connector U1-4A male, 1/4" x 1/8" pipe thread (3 pcs)
Connector U1-4B male, 1/4" x 1/4" pipe thread (3 pcs)
Connector U1-6B male, 3/8" x 1/4" pipe thread (3 pcs)
Union U2 -4, 1/4" are (5 pcs)
Reducing Union UR2-64, 3/8" x 1/4" are (3 pcs)
Reducing Union UR2-84, 1/2" x 1/4" are (2 pcs)
Manifold Union coupling US-4-4, 1/4" x 1/4" are (2 pcs)
Reducing UR3-46, 1/4" female x 3/8" male (2 pcs)
Reducing UR3-48, 1/4" female x 1/2" male (1 pc)
Reducing UR3-64, 3/8" female x 1/4" male (2 pcs)
296
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
COLLECTIO
IONNO
OFFF
FIT
ITT
TING
INGS
S, 3
3//8 - 5
5//8"
601 636449
Features
Comprehensive selection
Benets
Handy for repairs or system maintenance
Ordering information
Supplied with:
Plug P2-6, 3/8" are (2 pcs)
Plug P2-8, 1/2" Flare (1 pc)
Union TEE T2-6, 3/8" are (2 pcs)
Union TEE T2-8, 1/2" are (1 pc)
Union TEE T2-10, 5/8" are (1 pc)
Reducing Union TEE TR2-86, 1/2" + 1/2" x 3/8" (1 pc)
Connector U1-6C male, 3/8" x 3/8" pipe thread (1 pc)
Connector U1-8C male, 1/2" x 3/8" pipe thread(3 pcs)
Union U2-6, 3/8" are (3 pcs)
Union U2-8, 1/2" are (2 pcs)
Union U2-10, 5/8" are (1 pc)
Reducing Union UR2-86, 1/2" x 3/8" are (1 pc)
Reducing Union UR2-108, 5/8" x 1/2" are (1 pc)
Manifold Union coupling US-4-6, 3/8" x 3/8" are (1 pc)
Manifold Union coupling US-4-8, 1/2" x 1/2" are (1 pc)
Reducing UR3-68, 3/8" female x 1/2" male (1 pc)
Reducing UR3-86, 1/2" female x 3/8" male (2 pcs)
Reducing UR3-810, 1/2" female x 5/8" male (1 pc)
297
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
FIX
IXEED L
LEEAK D
DEETECTOR K
KIT
IT,, 4 C
CHA
HANNE
NNELL, MR
MRDD4S
4S--2L
607 708016
Features
Inexpensive, robust and long-lasting semi-conductor
technology
Can detect multiple refrigerants simultaneously
2 level alarm system:
Low level alarm resets automatically once the atmosphere is clear as found in intermittent leaks
High level alarm needs to be manually reset after the leak has been rectied. Use Unitor's electronic hand held
leak detector UNIRX-1A Part No 536946 for identifying leaks
Relatively easy to install, requires no special preparations and low maintenance requirements
Economical solution
Can be connected to existing engine room alarm systems
Comes in 220 V with an option for 110 V
IP42
Benets
Crew safety: safeguards crew members from long-term exposure to high levels of leaked refrigerant gas in
enclosed spaces.
Cost saving: helps reduce costs due to accidental loss of refrigerants from unmonitored leaks
Environmentally sound solution: reduces the risks of global warming and damaging the ozone layer by
instantaneous warning of leaks
Class Compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV
Clean notation
Semi-conductors for halocarbons may be used to detect This is particularly useful in monitoring a plant room with a
more than one gas or a mixture of gases simultaneously. number of different refrigerants.
**Kit also available with 6 channel monitor (Part No 708018)
Ordering information
Supplied with: 100 m, 4 core screened cable 7/0.2 mm
Cable glands, 12 V siren and keys
4 channel monitor for up to 4 sensors
2 MSPH sensors (new type)
298
Accessories
Product number Product name
708073 REFRIGERANT GAS SENSOR CABLE
708057 REFRIGERANT GAS SENSOR AHU OR DUCT
708032 REFRIGERANT GAS SENSOR IP66
708024 REFRIGERANT GAS SENSOR
708040 REFRIGERANT GAS SENSOR VENT PIPE
299
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
FIX
IXEED L
LEEAK D
DEETECTOR K
KIT
IT,, 6 C
CHA
HANNE
NNELL, MR
MRDD6S
6S--2L
607 708018
To detect leakages of refrigerants onboard your vessel's refrigeration systems, the leak kit MRD4S
enables you to monitor up to 4 locations for the presence of CFC, HCFC and HFC's. The
semiconductor sensors are easy to install and with their chemical stable design give you an inexpensive
solution to comply to LRS/DNV requirements.
Features
Inexpensive, robust and long-lasting semi-conductor technology
Can detect multiple refrigerants simultaneously
2 level alarm system:
Low level alarm resets automatically once the atmosphere is clear as found in intermittent leaks
High level alarm needs to be manually reset after the leak has been rectied. Use Unitor's electronic hand held
leak detector UNIRX-1A Part No 536946 for identifying leaks
Relatively easy to install, requires no special preparations and low maintenance requirements
Economical solution
Can be connected to existing engine room alarm systems
Comes in 220 V with an option for 110 V
IP42
Benets
Crew safety: safeguards crew members from long-term exposure to high levels of leaked refrigerant gas in
enclosed spaces
Cost saving: helps reduce costs due to accidental loss of refrigerants from unmonitored leaks
Environmentally sound solution: reduces the risks of global warming and damaging the ozone layer by
instantaneous warning of leaks
Class compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV
Clean notation
Semiconductors for halocarbons may be used to detect This is particularly useful in monitoring a plant room with a
more than one gas or a mixture of gases simultaneously. number of different refrigerants.
**Kit also available with 4 channel monitor (Part No 708016)
Ordering information
Supplied with: 100 m, 4 core screened cable 7/0.2 mm
Cable glands, 12 V siren and keys
6 channel monitor for up to 4 sensors
4 MSPH sensors (new type)
300
Accessories
Product number Product name
708073 REFRIGERANT GAS SENSOR CABLE
708057 REFRIGERANT GAS SENSOR AHU OR DUCT
708032 REFRIGERANT GAS SENSOR IP66
708024 REFRIGERANT GAS SENSOR
708040 REFRIGERANT GAS SENSOR VENT PIPE
301
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
FIX
IXEED L
LEEAK D
DEETECTOR K
KIT
IT 4 C
CHA
HANE
NELLS IP
IP66
66
607 767079
To detect leakages of refrigerants onboard your vessel's refrigeration systems, the leak kit MRD4S
enables you to monitor up to 4 locations for the presence of CFC, HCFC and HFC's. The semi
conductor sensors are easy to install and with their chemical stable design give you an inexpensive
solution to comply to LRS/DNV requirements. IP Class is 66
Features
Inexpensive, robust and long-lasting semi-conductor technology
Can detect multiple refrigerants simultaneously
2 level alarm system:
Low level alarm resets automatically once the atmosphere is clear as found in intermittent leaks
High level alarm needs to be manually reset after the leak has been rectied. Use Unitor's electronic hand held
leak detector UNIRX-1A Part No 536946 for identifying leaks
Relatively easy to install, requires no special preparations and low maintenance requirements
Economical solution
Can be connected to existing engine room alarm systems
Comes in 220 V with an option for 110 V
IP66
Benets
Crew safety: safeguards crew members from long-term exposure to high levels of leaked refrigerant gas in
enclosed spaces.
Cost saving: helps reduce costs due to accidental loss of refrigerants from unmonitored leaks
Environmentally sound solution: reduces the risks of global warming and damaging the ozone layer by
instantaneous warning of leaks
Class compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV
Clean notation
Semi-conductors for halocarbons may be used to detect This is particularly useful in monitoring a plant room with a
more than one gas or a mixture of gases simultaneously. number of different refrigerants.
Ordering information
Supplied with: 100 m, 4 core screened cable 7/0.2 mm
Cable glands, 12 V siren and keys
4 channel monitor for up to 4 sensors
2 MSPH sensors (new type)
Approvals
CE
302
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
FIX
IXEED L
LEEAK D
DEETECTOR, MS
MSPPH S
SEENS
NSOOR
607 708024
Features
Working temperature range -20 C to +50 C (-4 F
to +122 F)
IP 41 rated
Improved sensor housing
Improved sensor with lter to minimise false alarms
from background gases
Improved sensor PCB design with incorporated test
points
Simplied annual maintenance / testing procedures
Field adjustments to the sensor sensitivity can be
carried out very easily. Sensitivity can be set as low
as 100 ppm
Factory supply setting is 500 ppm for low level and
1,000 ppm for high level
Benets
Crew safety: safeguards crew members from long-
term exposure to high levels of leaked refrigerant gas
in enclosed spaces
Cost saving: helps reduce costs due to accidental
loss of refrigerants from unmonitored leaks
Environmentally sound solution: reduces the risks
of global warming and damaging the ozone layer by instantaneous warning of leaks
Class compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV
Clean notation
303
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
FIX
IXEED L
LEEAK D
DEETECTOR, IP
IP66
66 S
SEENS
NSOOR
607 708032
This is the new and improved refrigerant leak detection sensor for use in areas of high humidity or
water ingress such as in cold rooms or in refrigerated cargo hold battery spaces for direct expansion
systems.
Can be used for detecting all the CFC, HCFC, HFC refrigerants and hydrocarbons.
NB: Special sensors for Ammonia available on request
Features
Working temperature range -40 C to +50 C (-40 F to +122 F)
Improved sensor housing IP66 with Delrin head for high humidity, wash down areas, and fast response
Improved sensor with lter to minimise false alarms from background gases
Improved sensor PCB design with incorporated test points
Simplied annual maintenance / testing procedures
Field adjustments to the sensor sensitivity can be carried out very easily. Sensitivity can be set as low as 100 ppm
Factory supply setting is 500 ppm for low level and 1,000 ppm for high level
Benets
Crew safety: safeguards crew members from long-term exposure to high levels of leaked refrigerant gas in
enclosed spaces
Cost saving: helps reduce costs due to accidental loss of refrigerants from unmonitored leaks
Environmentally sound solution: reduces the risks of global warming and damaging the ozone layer by
instantaneous warning of leaks
Class compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV
Clean notation
304
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
FIX
IXEED L
LEEAK D
DEETECTOR, S
SAAFETY V
V//V V
VEENT P
PIP
IPE
E
SENS
NSOOR
607 708040
This is the new and improved refrigerant leak detection sensor for mounting on the vent pipes of
system safety / relief valves to detect either leaking valves or activated ones.
Can be used for detecting all the CFC, HCFC, HFC refrigerants and hydrocarbons.
NB: Special sensors for Ammonia available on request
Features
Working temperature range -20 C to +50 C (-4 F to +122 F)
IP 41 rated
Improved sensor with lter to minimise false alarms from background gases
Improved sensor PCB design with incorporated test points
Simplied annual maintenance / testing procedures
Field adjustments to the sensor sensitivity can be carried out very easily. Sensitivity can be set as low as 100 ppm
Factory supply setting is 500 ppm for low level and 1,000 ppm for high level
Benets
Crew safety: safeguards crew members from long-term exposure to high levels of leaked refrigerant gas in
enclosed spaces
Cost saving: helps reduce costs due to accidental loss of refrigerants from unmonitored leaks
Environmentally sound solution: reduces the risks of global warming and damaging the ozone layer by
instantaneous warning of leaks
Class compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV
Clean notation
305
MA
MARRINE P
PRRODUCTS Refrigeration equipment
System Equipment and Accessories
FIX
IXEED L
LEEAK D
DEETECTOR, A
AHU
HU/D
/DUUCT S
SEENS
NSOOR
607 708057
This is the new and improved refrigerant leak detection sensor for mounting in the duct pipes of A/C Air
Handling Unit outlets to detect refrigerant leaks from evaporator coils.
Can be used for detecting all the CFC, HCFC, HFC refrigerants and hydrocarbons.
NB: Special sensors for Ammonia available on request
Features
Working temperature range -40 C to +50 C (-40 F to +122 F)
IP 56 rated
Improved sensor with lter to minimise false alarms from background gases
Improved sensor PCB design with incorporated test points
Simplied annual maintenance / testing procedures
Field adjustments to the sensor sensitivity can be carried out very easily. Sensitivity can be set as low as 100 ppm
Factory supply setting is 500 ppm for low level and 1,000 ppm for high level
Benets
Crew safety: safeguards crew members from long-term exposure to high levels of leaked refrigerant gas in
enclosed spaces
Cost saving: helps reduce costs due to accidental loss of refrigerants from unmonitored leaks
Environmentally sound solution: reduces the risks of global warming and damaging the ozone layer by
instantaneous warning of leaks
Class compliant: the leak detection system is compliant with LRS requirements for their EP notation and the DNV
Clean notation
FIX
IXEED L
LEEAK D
DEETECTOR, 4 C
COORE C
CAABLE
607 708073
This is a 0.2 mm, 4-core screened cable for connecting the sensor heads to each channel on the
monitor.
The cable is classed as halogen free.
Features
100 m coil
Screened cable
306
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
DIG
IGIT
ITA
AL D
DUUAL T
THE
HER
RMO
MOME
METTER
606 584417
The multifunction thermometer provides functions such as "auto power off", "auto-ranging", "relative
measurement", "record Max./Min.". Operation of the thermometer is intuitive - with explanatory labels
on the membrane keys, and mode and status displayed on the LCD display.
NB: Supplied without probes. Please specify probe type for suitable temperature
Features
Can measure temp difference between two points, during system check
Memory-in function up to ten data can be stored
Records max and min values during measurement and system adjustments
User calibration function by operating the panel keys
Power two AA size (LR6) batteries included
Lightweight 180 g
CE approved in compliance with EMC standards, protection class IP 54
Accessories
Product number Product name
584433 AIR PROBE
584425 SURFACE PROBE
589994 NEEDLE PROBE
602813 WIRE THERMOCOUPLE PROBE
597385 MARINE THERMOMETER CASE
307
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
MA
MARRINE T
THE
HER
RMO
MOME
METTER K
KIT
IT U
UTTK-100
606 597377
Features
Can measure temp difference between two points,
during system check
Memory-in Function up to ten data can be stored
Records max and min values during measurement
and system adjustments
User calibration function by operating the panel keys
Power two AA size (LR6) batteries included
Light weight 180 g
CE approved in compliance with EMC standards,
protection class IP 54
Comes with 3 different probes such as air probe,
surface probe and needle probe
Additional two unshielded thermocouples
Benets
Accurate
Lightweight
Technical data
Length 100 mm
Width 450 mm
Height 360 mm
Weight 1.9 kg
Ordering information
Product number Product name
597377 MARINE THERMOMETER KIT
308
Accessories
Product number Product name
584417 DIGITAL DUAL THERMOMETER
584433 AIR PROBE
584425 SURFACE PROBE
589994 NEEDLE PROBE
602813 WIRE THERMOCOUPLE PROBE
597385 MARINE THERMOMETER CASE
309
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
SURFACE P
PRROBE T
THE
HER
RMO
MOME
METTER
606 584425
Features
Standard thermocouple connections
Temperature range -50 to + 500 C
AIR P
PRROBE T
THE
HER
RMO
MOME
METTER
606 584433
Features
Standard thermocouple connection
Temperature range -50 to +500 C
310
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
NE
NEEEDLE P
PRROBE T
THE
HER
RMO
MOME
METTER
606 589994
Features
Standard thermocouple connection
Working range -50 to +600 C
WIR
IREET
THE
HER
RMO
MOC
COUPLE P
PRROBE
606 602813
Features
Standard thermocouple connections
Temperature range -50 to + 400 C
311
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
INR
INRAAFRED T
THE
HER
RMO
MOME
METTER
606 737668
Features
Sturdy construction
Wide temperature range
Memory function
Benets
Hip holster makes it easy to carry around
Easy to use
Batteries are included
Technical data
312
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
VACUUM P
PUUMP
MP,, S
STTAND
NDA
ARD, 115
115/230
/230 V
606 587568
Features
Two stage pump for deep vacuum
Dual voltage (115/230 V) and frequency model (50/
60 Hz)
Achievable rating as low as 20 microns
Displacement 113 l/min
Benets
Built in isolating valve isolates the pump from the system with only a 1/4 turn, making it simple to measure rate of rise
Can be used on systems using CFC, HCFC and HFC in ombination with mineral oil, polyester oil, alkyl benzeen oil
and PAG oil
Referred to as the long term trouble avoider among refrigeration specialists
Technical data
313
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
VACUUM P
PUUMP
MP,, HE
HEAAVY D
DUUTY, 115
115/230
/230 V
606 597658
Features
Two stage deep vacuum
Dual voltage (115/230 V) and frequency model (50/
60 Hz)
Achievable rating as low as 20 microns
Displacement 280 l/min
Benets
Built in isolating valve isolates the pump from the
system with only a 1/4 turn, making it simple to measure rate of rise
Can be used on systems using CFC, HCFC and HFC in ombination with mineral oil, polyester oil, alkyl benzeen oil
and PAG oil
Referred to as the long term trouble avoider among refrigeration specialists
Technical data
314
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
VACUUM P
PUUMP O
OIL
IL 0
0..95 L
606 320424
Features
It contains an anti sludge agent that breaks up water,
dirt and oil combinations, allowing the water to
separate from the oil
Excellent for old and new vacuum pumps
For cleaning and lubricating of the pump at the same
time
VACUUM G
GAAUGE 0-
0-1000
1000 MB
MBAAR
606 540104
Features
Wall mountable using screws
Glycerine lled
Scale from 1000 - 0 mbar
Connection is 1/8" BSP Male; down
315
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
DIG
IGIT
ITA
AL V
VA
ACUUM G
GAAUGE U
UVVG-64
606 711507
Features
User friendly digital LCD display
Range from atmospheric pressure down to 0
microns
Resolution at low end of the scale is 1 micron
Option to show time graph to see change in vacuum
pressure
Over pressure protection (35 bar)
Convenient hanger at the back
Supplied in a soft case including battery
316
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
ELECTRONIC V
VA
ACUUM G
GAAUGE U
UVVG-150
606 597666
Features
User friendly "trafc light" LED display
Range from atmospheric pressure down to 50
microns
Over pressure protection
Convenient hanger at the back
Supplied in a soft case including battery
Benets
This electronic vacuum gauge will also indicate if
the system is not leak tight
Instruction on how to differenciate between moisture
in the system and leaks
Technical data
317
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
CHA
HARRGING
ING/V
/VA
ACUUM HO
HOSSE U
UCCH-
H-7
72Y
606 535070
Features
High quality hose material
Both ends have 3/8" SAE are female connection
Embedded O-ring seals for positive seal
Benets
Flexible even in low teperatures without colapsing
Approved for high pressure blends
Technical data
318
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
VACUUM V
VA
ALVE A
ASSSEMB
MBLLY
606 513382
A brass valve assembly that give maximum control during evacuation and recharging.
Features
1/2" SAE are female connection to t directly on vacuum pump
1/4" SAE are connection for vacuum gauge connection
3/8" SAE are connection for system connection
Large internal port for maximized ow
Benets
Easy to use
Excellent control over process
Technical data
319
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
HA
HAND
ND O
OIL
IL P
PUUMP 5 L & 25 L D
DRRUMS
606 597534
High pressure hand oil pump designed to allow technicians to pump refrigeration oil into the system or
compressor crankcase while the unit is in operation, no need for system shutdown during oil charge.
Features
Pump outlet 1/4" SAE are
Pump pressure upto 17 bar
Universal tapered adapter that ts all oil container necks
Benets
Delivered with acessory kit for removal of oil from crankcase, suction accumulator or simmilar
Fits all standard cans (5 and 25 L)
ACID T
TEEST K
KIT
IT MINE
MINERRAL + A
ABBO
OIL
ILS
S
606 540088
Features
Simple sampling and testing
Quick result
ACID T
TEEST K
KIT
IT P
POOE O
OIL
ILS
S
606 607828
Features
Simple sampling and testing
Quick result
320
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
REFRIG
IGEERANT LLE
EAK D
DEETECTIO
IONNK
KIT
IT,, U
UVVT
TRRACER
KIT 220
220/2
/240
40 V
606 587170
Features
Oil based uorescent liquid fully miscible with
refrigerant compressor oil
Circulates in system and leaves uorescent trace if
leak
Benets
Ready to use kit
Product code: UV1160F compressor oil. Evidence of the tracer uid will be found at
the source of each leak. This will give a uorescent glow
Glo-Leak tracer uid is an oil based uorescent liquid that is
when the area is scanned with the UV inspection lamp,
fully miscible and compatible with refrigerants and
easily identifying the location of the leak.
compressor oil. When added to the compressor oil sump,
the tracer uid circulates around the system with the
Ordering information
Product number Product name
587170 U.V. TRACER KIT 220V/240V
606268 U.V. TRACER FLUID 250ML
587162 U.V. TRACER FLUID 250ML
602334 U.V. TRACER FLUID 5 LTR
596536 SPARE BULB 110/220V 100W
606465 GLO-KLENZ CLEANER
321
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
REFRIGIGE
ERANT L
LEEAK D
DEETECTIO
IONNK
KIT
IT,, U
UVVT
TRRACER
KIT 12 V
606 711523
Effective tool for locating refrigerant leaks in refrigeration systems in inaccsessible areas by circulating
the tracer uid and using UV-light. A rechargeable battery gives complete freedom on where to use the
kit.
Features
Oil based uorescent liquid fully miscible with refrigerant compressor oil
Circulates in system and leaves uorescent trace if leak
110 V and 220 V charger included
12 V - 7 Ah battery gives a long operating time up to 30 minutes
Benets
Ready to use kit
Technical data compressor oil. When added to the compressor oil sump,
the tracer uid circulates around the system with the
Product code UV2100U+ compressor oil. Evidence of the tracer uid will be found at
Operating Voltage 12 V the source of each leak. This will give a uorescent glow
when the area is scanned with the UV inspection lamp,
Glo-Leak tracer uid is an oil based uorescent liquid that is easily identifying the location of the leak.
fully miscible and compatible with refrigerants and
Ordering information
Product number Product name
711523 U.V. TRACER KIT 12V
606268 U.V. TRACER FLUID 250ML
587162 U.V. TRACER FLUID 250ML
602334 U.V. TRACER FLUID 5 LTR
596551 SPARE BULB 12V 100W
606465 GLO-KLENZ CLEANER
322
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
REFRIG
IGE
ERANT LLE
EAK DDE
ETECTIO
ION,
N, U
UVV, T
TRRACER
FLUID F
FOOR MINE
MINERRAL O
OIL
IL
This tracer uid for mineral oil comes in both 250 ml and 5 liter containers. It is used in combination
with the UV Fluorescent leak detection system for nding leaks in refrigeration systems.
Evidence of the tracer uid will be found at the source of the leak and glow under the light of a UV
detection lamp.
Ordering information
Product number Product name
587162 U.V. TRACER FLUID 250ML
602334 U.V. TRACER FLUID 5 LTR
323
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
REFRIG
IGEERANT L
LEEAK DDEETECTIOION,
N, U
UVV, U
UNIV
NIVE
ERSAL
TRACER FFL
LUID F
FOOR A
ALLL O
OIL
IL T
TYYPES
606 606268
A universal tracer uid for all types of oil comes in a 250 ml plastic bottle. It is used in combination with
the UV Fluorescent leak detection system for nding leaks in refrigeration systems.
Evidence of the tracer uid will be found at the source of the leak and glow under the light of a UV
detection lamp.
Features
Applicable for PAG, POE, PAO and mineral oil
Benets
One type ts all
REFRIG
IGEERANT L
LEEAK D
DEETECTIO
ION,
N, U
UVV, G
GLLO-K
-KLLENZ
CLEANE
NER R
606 606465
An easy to use cleaning agent to remove tracer uid from the surface.
Features
Removes UV tracer uid
Benets
Easy to use
324
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
SPARE B
BUULB 110
110/220
/220 V 100 W
606 596536
Ordering information
Product number Product name
587170 U.V. TRACER KIT 220V/240V
596536 SPARE BULB 110/220V 100W
SPARE B
BUULB 12V 100W
606 596551
Ordering information
Product Number Product name
711523 U.V. TRACER KIT 12V
596551 SPARE BULB 12V 100W
325
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
HA
HAND
ND HE
HELLD R
REEFRIG
IGEERANT L
LEEAK D
DEETECTOR
UNIR
NIRXX-1A
606 716142
Features
Six-segment visual leak size indicator
Audible alarm
High and Low sensitivity level
Cordless
5 ppm sensitivity
Supplied in carrying case and spare sensing tips
Batteries 2 pcs C-cell alkaline
Benets
Delivered in sturdy carry case
Includes batteries and spare sensing tip
Ordering information
Product number Product name
716142 REFRIGERANT LEAK DETECTOR UNIRX-1A
548700 MAINTENANCE KIT LEAK DETECTOR-XP2
Approvals
UL classied CE approved
326
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
MA
MAINT
INTE
ENA
NANC
NCEEK
KIT
IT L
LEEAK D
DEETECTOR-X
-XPP2
606 548700
Ordering information
Product number Product name
548700 MAINTENANCE KIT LEAK DETECTOR-XP2
716142 REFRIGERANT LEAK DETECTOR UNIRX-1A
327
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
REFRIG
IGEERATIO
IONN HA
HAND
NDY
YTTO
OOLS C
CAASE
606 752154
Features
Quality tools selected for dened purposes
Handy light weight suitcase
Service and refrigerant slide rulers are included
Vacuum and charging hoses suitable for every day
operations
Refrigeration Fault Diagnostic Slide to assist in fault nding
Unitor Refrigeration Handling Guide to give practical tips
Unicool Refrigerant Slide giving technical data on most common marine refrigerants
Benets
Convenient
Every tool needed is collected in one place together with a useful refrigerant handling guide and more
Supplied with Hose with ball valve, 1/4" SAE, 800 psi
Specialised refrigeration tools: UT-04 1/4" SAE male T-Piece
Tube cutter Mini General Hand Tools:
Schrader Valve Core Removal Tool Screw drivers (-) & (+)
Solenoid Valve Operating Magnet Small screw drivers (-) & (+)
Evaporator Fin Straightener (Comb) Pliers: Long nose, split joint, combination & angle nose
Hoses 0.9 & 1.8 m w/ball valve & sight glass, 1/4" SAE, Adjustable wrench
800 psi
Ordering information
Product number Product name
Spare parts available for purchase:
544932 REFRIGERANT CYL. VALVE ADAPTOR SET
743476 MAGNET & VOLT STICKS PACK
737668 IR THERMOMETER W/BELT HOLSTER
528026 INNER-OUTER REAMER
522557 TUBE CUTTER UPT-274-FC
522573 FLARE TOOL
743203 RATCHET WRENCH BIG 1/2-1/4-5&9/16
743195 RATCHET WRENCH SMALL 1/4-3/8-3&5/16
328
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
TUBE C
CUUTTER U
UPPT-274-
4-FFC
606 522557
TUBE B
BEEND
NDEER, T
TRRIP
IPLLE HE
HEAAD
606 522565
Features
Services tubes up to diameters of 3/8"
Bending angle max 90 degrees
329
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
FLARE T
TO
OOL
606 522573
45 aring tool for all tubes in metric and inch sizes, compact size for use in narrow spaces.
Features
Flares tubes with O.D. from 5 to 16 mm or 3/16" to 5/8"
Supplied in sturdy plastic case
Benets
practical also in narrow spaces
FLARING S
SEET
606 597690
A 45 eccentric aring tool in inch sizes made from forged high quality steel. The off-centre cone
produces a rolling motion for uniform are walls.
Features
Flare set supplied in sturdy plastic case
Applicable for tubes with O.D. from 1/8 to 3/4"
330
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
FLARE/S
/SW
WAGE S
SEET 3
3//16" - 3
3//4"
606 597708
Features
Tubes with maximum O.D. of 3/16" to 3/4"
Flare & swage set supplied in sturdy plastic case
INNE
INNERR-O
-OUUTER R
REEAME
MERR
606 528026
Features
Maximum 38 mm (1.5") OD
Maximum 32 mm (1.25") ID
331
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
RATCHE
HETTW
WRRENC
NCHHS
SMA
MAL
LL 1/
1/4"
4" - 3
3//8" - 3 & 5
5//16"
606 743195
Features
Fits a variety of different valve spindles
Plastic covered grip for comfort
Square 3/16", 1/4", 5/16" and 3/8"
Benets
4-in-1 wrench that is easy to carry around
RATCHE
HETTW
WRRENC
NCHHB
BIG
IG 1/
1/2"
2" - 1/
1/4"
4" - 5 & 9
9//16"
606 743203
Features
Fits a variety of different valve spindles
Plastic covered grip for comfort
Hexagonal 1/2" and 9/16"
Square 1/4" and 3/16"
Benets
4-in-1 wrench that is easy to carry around
332
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
MA
MAG
GNE
NET
T&V
VO
OLT S
STTIC
ICKKS P
PA
ACK
606 743476
Features
Pocket clip
Test function
CE approved
Batteries and user information included
Benets
Easy and practical to use
CHA
HARRGING HO
HOSSE S
SEET U
UCCH-
H-7
72 3 X 1.
1.88M
606 597757
Features
Yellow, red and blue hose
High quality material
Both ends have 1/4" SAE are female connection
Teon seals
Benets
Flexible even in low teperatures without collapsing
Approved for high pressure blends
333
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
DELUXE S
SEERVIC
ICEE MA
MANIF
NIFO
OLD S
SEET 2-
2-W
WAY, R
R--410A
606 711499
Features
60 mm glycerine-lled gauges
Gauge scale for refrigerants like R-410A (higher
pressure
3 hoses 1/4 (yellow, red , blue) with length of 150
cm; connection 5/16" SAE are (1/2"-20 UNF) on
one side and on the other side 1/4" SAE are
1 vacuum hose 3/8 (yellow) hose with length 90 cm
with 3/8" SAE are connections on both sides
Core depressor (Schrader) connections where
applicable
Hoses classied with working pressure of 60 bar
Non-rotating piston valves for durability
Benets
Liquid lled gauges gives accurate reading
Easy to use with colour-coded valves and hoses
334
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
DELUXE SSE
ERVIC
ICEE MA
MANIF
NIFO
OLD S
SEET 4-
4-W
WAY, V
VA
ARIO
IOUUS
REFRIG
IGEERANT
NTSS
606 711473
Features
80 mm glycerine-lled gauges
Scale for refrigerants R22(R417), R134a,
R404A(R507), R407C
3 hoses 1/4 (yellow, red , blue) with length of 120 cm; connection 1/4" SAE are
1 vacuum hose 3/8 (yellow) hose with length 90 cm with 3/8" SAE are connections on both sides
Core depressor (Schrader) connections where applicable
Hoses classied with working pressure of 40 bar
Non-rotating piston valves for durability
Benets
Liquid lled gauges gives accurate reading
Easy to use with colour-coded valves and hoses
335
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
REFRIG
IGEERANT R
REECOVERY P
PA
ACKAGE, 115 V
606 652511
Features
Comprehensive package that supports a variety of
operations
Maintenance friendly
Lightweight and portable
Recovers vapour and liquid refrigerants
Suitable for all standard (CFC, HCFC and HFC) refrigerants
Benets
Helps the ship operator to re-use the refrigerants during system maintenance and service
Reduces refrigerant consumption
Cost saving
Full range of accessories and spare parts
Technical data
336
Ordering information
The recovery package consists of:
Accessories
Product Number Product name
734681 UNITOR RECOVERY EQUIPMENT BOX
613935 RECOVERY UNIT CONNECTION KIT
636738 INLET FILTER DRIER 3PCS, 1/4" FLARE
632588 RECOVERY CYL 56L + DOCS OUTRIGHT
Approvals
Package complies with all US EPA and EC CE - TUV and ARI - UL
regulations
337
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
REFRIG
IGEERANT R
REECOVERY P
PA
ACKAGE, 230 V
606 652522
Features
Comprehensive package that supports a variety of
operations
Maintenance friendly
Lightweight and portable
Recovers vapour and liquid refrigerants
Suitable for all standard (CFC, HCFC and HFC) refrigerants
Benets
Helps the ship operator to re-use the refrigerants during system maintenance and service
Reduces refrigerant consumption
Cost saving
Full range of accessories and spare parts
Technical data
338
Ordering information
Supplied with:
Accessories
Product number Product name
734681 UNITOR RECOVERY EQUIPMENT BOX
613935 RECOVERY UNIT CONNECTION KIT
636738 INLET FILTER DRIER 3PCS, 1/4" FLARE
632588 RECOVERY CYL 56L + DOCS OUTRIGHT
Approvals
Package complies with all US EPA and EC CE - TUV and ARI - UL
regulations
339
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
REFRIG
IGEERANT R
REECOVERY U
UNIT
NIT,, U
URRU-5000B
5000B,, 115 V
V,,
50
50/60
/60 HZ
606 613747
Features
Includes inlet lter and a short utility connection hose
Instruction manual adapted to maritime usage
Maintenance friendly
Lightweight and portable
Recovers vapour and liquid refrigerants
Suitable for all standard (CFC, HCFC and HFC) refrigerants
Benets
Helps the ship operator to re-use the refrigerants during system maintenance and service
Reduces refrigerant consumption
Cost saving
Full range of accessories and spare parts available
Technical data
340
Accessories
Product number Product name
613885 COMPRESSOR REPAIR KIT
613893 PISTON SEAL REPAIR KIT
613901 VALVE REPAIR KIT
613919 SHAFT SEAL REPAIR KIT
613935 RECOVERY UNIT CONNECTION KIT
636738 INLET FILTER DRIER 3PCS, 1/4" FLARE
Approvals
CE - TUV and ARI - UL
341
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
REFRIG
IGEERANT R
REECOVERY U
UNIT
NIT,, U
URRU-5000A
5000A,, 230 V
V,,
50
50/60
/60 HZ
606 613748
Features
Includes inlet lter and a short utility connection hose
Instruction manual adapted to maritime usage
Maintenance friendly
Lightweight and portable
Recovers vapour and liquid refrigerants
Suitable for all standard (CFC, HCFC and HFC) refrigerants
Benets
Helps the ship operator to re-use the refrigerants during system maintenance and service
Reduces refrigerant consumption
Cost saving
Full range of accessories and spare parts available
Technical data
342
Accessories
Product number Product name
613885 COMPRESSOR REPAIR KIT
613893 PISTON SEAL REPAIR KIT
613901 VALVE REPAIR KIT
613919 SHAFT SEAL REPAIR KIT
613935 RECOVERY UNIT CONNECTION KIT
636738 INLET FILTER DRIER 3PCS, 1/4" FLARE
Approvals
CE - TUV and ARI - UL
343
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
RECOVERY U UNIT
NIT U
URRU-5000A
5000A/B
/B,, C
CO
OMP
MPR
RESSOR
REPAIR K
KIT
IT
606 613885
RECOVERY U UNIT
NIT U
URRU-5000A
5000A/B
/B,, P
PIS
IST
TON S
SEEAL
REPAIR K
KIT
IT
606 613893
RECOVERY U
UNIT
NIT U
URRU-5000A
5000A/B
/B,, V
VA
ALVE R
REEPAIR K
KIT
IT
606 613901
RECOVERY U UNIT
NIT U
URRU-5000A
5000A/B
/B,, S
SHA
HAF
FT S
SEEAL
REPAIR K
KIT
IT
606 613919
344
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
RECOVERY U
UNIT
NIT U
URRU-5000A
5000A/B
/B,, C
COONNE
NNECCTIO
IONNK
KIT
IT
606 613935
Features
Complete kit
Packed in sturdy case
Ordering information
Supplied with:
Hoses with 1/4" SAE are connections
Ball valves (2 pcs)
Ball valve with optical sight for ow indication
T-piece
RECOVERY U UNIT
NIT UURRU-5000A
5000A/B
/B,, INL
INLEET F
FIL
ILT
TER
DRIE
IERR 3P
3PCCS, 1/
1/4"
4" F
FLLARE
606 636738
Features
Inline lter dryer element
345
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
DIG
IGIT
ITA
AL W
WEEIG
IGHING
HING P
PLLATFORM A
ADDS-100
606 613927
Features
Capable of handling cylinders up to 100 kg weight
Control unit connected to platform by means of a
spiral cord
Digital display
A "zero" function is included to measure added
refrigerant
Supplied in a sturdy carrying case
Includes batteries and instructions
Benets
Easy to use
Accurate measurement
Technical data
Range 0-100 kg
Accuracy +/- 0.5% of reading or +/- 1 digit
Battery life 30 hours
Weight 2.8 kg
Dimensions 387 x 267 x 635 mm
346
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
ONB
NBOOARD S
STTORAGE B
BOOX F
FOOR R
REEFRIG
IGEERANT
RECOVERY P
PAACKAGE
607 734681
A sturdy 200 L box used for storing recovery equipment onboard a vessel; handy for safekeeping and
easy to locate during port state inspections.
Features
Completely weather proof and extremely rugged
Colour coded: grey box with yellow lid
Benets
Colour coded according to international recovery standards
CHA
HARRGING HO
HOS
SE - 1.
1.88 M, 1/
1/4"
4" F
FLLARE 9881268
CL-72-
2-Y
YYYE
ELLOW
606 320234
Features
High quality hose material
Both ends have 1/4" SAE are female connection
One end tted with a valve core depressor
Teon seals
Benets
Flexible even in low teperatures without colapsing
Approved for high pressure blends
Schrader valve depressor eases the charging operation
347
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
FIL
ILT
TER D
DRRIE
IERRS U
UFFD 2 P
PCCS
Features
2 driers per pack
Ready to use
Ordering information
Product Number Product name Connection Length Diameter
636506 FILTER DRIER-UFD-032F 2PCS 1/4" SAE are 110 mm 40 mm
666613 FILTER DRIER-UFD-052F 2PCS 1/4" SAE are 115 mm 50 mm
636621 FILTER DRIER-UFD-053F 2PCS 3/8" SAE are 130 mm 50 mm
636639 FILTER DRIER-UFD-082F 2PCS 1/4" SAE are 140 mm 65 mm
636647 FILTER DRIER-UFD-083F 2PCS 3/8" SAE are 110 mm 65 mm
636654 FILTER DRIER-UFD-084F 2PCS 1/2" SAE are 160 mm 65 mm
636662 FILTER DRIER-UFD-162F 2PCS 1/4" SAE are 110 mm 65 mm
636670 FILTER DRIER-UFD-163F 2PCS 3/8" SAE are 170 mm 65 mm
636688 FILTER DRIER UFD-164F 1/2" FL. 2PC 1/2" SAE are 180 mm 65 mm
348
MA
MARRINE P
PRRODUCTS Refrigeration equipment
Tools
ACTIV
IVA
ATED A
ALLUMINA B
BEEADS
604 617688
Features
5 kg bucket
SIL
ILIC
ICA
AGGE
EL D
DEESIC
ICCCANT
604 617696
Features
5kg bucket
349
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!!&,%*.(60%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!!&,%*.(60%'9*%
93/52$&0"(&
MARINE PRODUCTS
WELDING
REGULATORS 510
Features
Easy identication of gas types with colour-coded
adjustment knobs
Immediate identication of gas pressures with easy
to read gauges marked both in psi and bar
Full capacity for all types of gas welding and cutting
work
Designed for use with Unitor gas cylinders
Full conformance with EN ISO 2503
Ordering information
Product number Product name
510000 REGULATOR 510 OX PRESSURE 0-16 BAR
510001 REGULATOR 510 AC PRESSURE 0-2.5 BAR
Accessories
Product number Product name
550160 WASHER ALU 10 PCS FOR OX REGULATOR
550178 CONTENTS GAUGE OX/AR 0-400 BAR
550194 WORKING GAUGE OX 0-16 BAR
550152 WASHER NYL 10 PCS FOR AC REGULATOR
550186 CONTENTS GAUGE AC 0-40 BAR
550202 WORKING GAUGE AC 0-2.5 BAR
619379 MANOMETER/GAUGE GUARD +
352
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Cylinder Regulators and Flashback Arrestors
FLASHB
HBAACK A
ARRRESTOR W
W--66S
Features
Pressure activated cut-off valve
Temperature activated cut-off valve
Flame arrestor
Non-return valve
Benets
Stops the pressure front
Prevents re from being supported by gas
Stops the ame front
Stops gas back feeding into the system
Maritime authorities, such as the Norwegian Maritime Non-return valve preventing reverse ow of gases,
Directorate, require the installation of ashback arrestors for thereby preventing a gas mixture from reaching
acetylene and oxygen, as incorrect maintenance or use of pipelines or cylinders
gas welding equipment may cause ashbacks of various Flame lter to quench the ame front of a ashback
types. Normally these will stop in a well designed torch, and or a burnback
are only noticed as a popping sound in the torch. However, Temperature activated cut-off to prevent further gas
faulty handling, maintenance or gas pressure settings may supply in case of re (activated if the temperature
lead to a penetrating ashback. This means that the gas rises to approximately 100 C)
ame passes back through the hose(s). In some cases it Pressure activated cut-off to prevent further gas
may also pass the regulator and ultimately reach the supply after a ashback (activated by the pressure
cylinder. shock in front of the ashback)
The ashback arrestors supplied by Unitor are designed for Pressure relief valve to vent off excessive pressure in
use both with gas cylinders and gas outlet stations and case of ashback or wrongly set working pressure
incorporate several safety functions: Indicator lever showing that the pressure activated
cut-off has been activated; the lever is also used for
resetting the ashback arrestor
Ordering information
Product number Product name Capacity (m3/h) Inlet pressure (bar)
183970 FLASHBACK ARRESTOR W-66S ACETYLENE 19 1,5
302976 FLASHBACK ARRESTOR W-66S OXYGEN 110 10
353
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Cylinder Regulators and Flashback Arrestors
FLASHB
HBAACK A
ARRRESTOR S
S55
55
Features
Pressure activated cut-off valve
Temperature activated cut-off valve
Flame arrestor
Non-return valve
Benets
Stops the pressure front
Prevents re from being supported by gas
Stops the ame front
Stops gas from back feeding into the system
Maritime authorities, such as the Norwegian Maritime Non-return valve preventing reverse ow of gases,
Directorate, require the installation of ashback arrestors for thereby preventing a gas mixture from reaching
acetylene and oxygen, as incorrect maintenance or use of pipelines or cylinders
gas welding equipment may cause ashbacks of various Flame lter to quench the ame front of a ashback
types. or a burnback
Normally these will stop in a well designed torch, and are Temperature activated cut-off to prevent further gas
only noticed as a popping sound in the torch. However, supply in case of re (activated if the temperature
rises to approximately 100 C)
faulty handling, maintenance or gas pressure setting may
Pressure activated cut-off to prevent further gas
lead to a penetrating ashback. This means that the gas
ame passes back through the hose(s). In some cases it supply after a ashback (activated by the pressure
may also pass the regulator and ultimately reach the shock in front of the ashback)
Indicator ring showing that the pressure activated
cylinder.
cut-off has been activated; the ring is also used for
The ashback arrestors supplied by Unitor are designed for resetting the ashback arrestor
use both with gas cylinders and gas outlet stations and
incorporate several safety functions:
Ordering information
Product number Product name Capacity (m3/h) Inlet pressure (bar)
708537 FLASHBACK ARRESTOR S55 AC 8,5 1,5
708545 FLASHBACK ARRESTOR S55 OX 50 10
354
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Hoses and Couplings
GAS HO
HOSSES
Normal working pressure is up to 20 bar. UNITORs hoses for acetylene and oxygen are specially
made for use with welding and cutting equipment. The
The hoses are colour-coded red for acetylene, blue for
hoses comply with the European Norm EN 559
oxygen and black for shielding gases.
specications for welding hoses.
Ordering information
Product number Product name
526434 Twin gas hoses blue/red 6mm (1/4") AC +OX/m 526434
624312 Twin gas hoses blue/red 9mm (3/8") AC+ OX/m
175554 Gas hose red 6mm (1/4") Acetylene/m
175562 Gas hose blue 6mm (1/4") Oxygen/m
175539 Gas hose red 9mm (3/8") Acetylene/m
175547 Gas hose blue 9mm (3/8") Oxygen/m
576157 Gas hose black 6mm (1/4") Argon/m
355
REEL, S
SEELF R
REETRACTING W
WIT
ITH
H 20M 6.
6.33 MM T
TWWIN
HO
HOSSE A
ACC/O
/OXX
176 725260
Features
Less handling of hoses rigging up and rigging down
Only required length of hose pulled out to do the job
Benets
Saves time
Less wear and tear on hoses
Avoid tripping accidents and improve safety
REEL W
WIT
ITH
HCCR
RANK F
FOOR W
WEELDING C
CAABLE A
AND
ND
GAS HO
HOSSES
195 175729
Features
Orderly storing of gas hoses or welding cables-
crank for winding up hoses or cable after work
Benets
Better use of limited space and results in less wear
and tear
Save time rigging down
356
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Hoses and Couplings
HO
HOSSE J
JOOINT F
FOOR G
GAAS HO
HOSSES
The hose joints are screw-couplings supplied in sets. Each set consists of two hose sockets with nuts
for connection to the gas regulator and torch. Included is also a connection stub for using the set as a
hose joint. Nuts and connection stub for acetylene are lefthand threaded and marked with a groove.
Oxygen are right-hand threaded. The hose joints are made of high-grade brass.
Ordering information
Product Number Product name
175588 HOSE JOINT F/6MM (1/4 INCH) AC HOSE
175596 HOSE JOINT F/6MM (1/4 INCH) OX HOSE
175604 HOSE JOINT F/9MM (3/8 INCH) AC HOSE
175612 HOSE JOINT F/9MM( 3/8 INCH) OX HOSE
HO
HOSSE C
CLLAMP
Ordering information
Product number Product name
729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS
729443 HOSE CLAMP FOR 3/8" HOSE (10 PCS
768416 CLAMP.1 EAR 12,3-14,3MM 1/4"""" HOS
768432 CLAMP.1 EAR 15,6-17,8MM 3/8"""" HOS
768507 PINCER TOOL FOR EAR TYPE HOSECLAMPS
PINC
INCHE
HER
RTTO
OOL F
FOOR HO
HOSSE E
EAAR C
CLLAMP
MPSS
401 768507
357
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Hoses and Couplings
QUIC
ICKKC
COOUPLING
INGSS
They ensure quick and gas-tight connection of the hoses In addition the connecting sleeves are colour-coded red and
without the use of tools. blue.
Accidental connection of wrong gas is prevented by the When disconnected the female socket (side towards the
different design of the male/female connections for acetylene regulator) automatically shuts off the gas ow.
and oxygen.
Accessories
Product number Product name
320218 QUICK COUPL.1/4IN HOSE AC
320192 QUICK COUPL.1/4IN HOSE OX
320200 QUICK COUPL.3/8IN HOSE AC
320184 QUICK COUPL.3/8IN HOSE OX
358
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Welders Accessories
SAFETY W
WEELDING G
GOOGGLES, L
LIF
IFT
TFFR
RONT F
FOOR G
GAAS
WELDING
176 175273
The ventilation slots are designed to prevent entry of sparks A protection glass is placed in front of the lter shade glass
and spatter, at the same time ensuring sufcient air (shade 5) in order to protect against spatter.
circulation to prevent dampness and fogging of the glasses. A protection glass is tted in the xed frame for protection
The lter shade glass is mounted in a ip-up front frame. when grinding and using the chipping hammer.
Accessories
Product number Product name Application Filter shade pcs/set
633305 SHADE 3 GLASS. 10 PCS Silver brazing 3 10
633313 SHADE 5 GLASS. 10 PCS General gas welding and cutting 5 10
633321 SHADE 6 GLASS. 10 PCS General gas welding and cutting 6 10
633354 SHADE 7 GLASS. 10 PCS Gas welding and cutting thick material 7 10
633297 PROTECTION GLASS. 10 PCS Protection glass Clear 10
GLASSES F
FOOR G
GAAS W
WEELDING G
GOOGGLES
The Unitor gas welding glasses have a diameter of 50 mm and t the goggles. They are available in
different grades of shade for various types of work. All glasses come in sets of 10 pcs.
359
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Welders Accessories
SAFETY S
SPPECTACLES C
CLLEAR F
FOOR E
EYYE
PROTECTIO
IONN
176 632943
Comfortable protective spectacles with integrated side For use during daily maintenance work in workshops and on
guards. The lens is made of scratch-resistant anti-glare site for protection against ying objects. Also use when
material. The temple arm length and angle are adjustable. handling chemicals.
SAFETY S
SPPECTACLES S
SHA
HAD
DE 4 F
FOOR B
BRRAZING A
AND
ND
GAS W
WEELDING
176 632950
Same modern lightweight design and features as the Clear brazing and light duty gas welding and cutting work. Not for
version. Fitted with shade 4 lens. For use when doing use when doing arc welding.
360
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Welders Accessories
SAFETY G
GRRIND
INDING
ING G
GOOGGLES W
WIT
ITH
HAANT
NTII MIS
MISTT
ACETATE L
LEENS
176 653410
Features
The headband is adjustable and elastic for
comfortable use
The lenses are clear, anti-mist acetate and the design
provides ample ventilation
361
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Welders Accessories
HE
HEAAT R
REESIS
ISTTANT MIT
MITTTEN F
FOOR G
GAAS C
CYYLIND
INDEERS
176 233148
The mitten should always be kept by acetylene cylinders and Also suitable for handling hot workpieces.
outlets to make it possible to close the valve in case of re. May be used on either right or left hand.
GAS/T
/TIG
IG S
SOOFTSKIN W
WEELDING G
GLLOVES, 6 P
PA
AIR
IRS
S
197 632794
Features
Softskin
Made according to international norms
Benets
Provides ngertip feeling, ensures easy control of
torch
Provides safety and long lasting quality
Thick welding gloves will hamper the control of the torch or arc, but will give less protection than the thicker welding
rod. Special softskin gloves are available for this purpose. gloves when touching hot metal.
They will fully protect from sparks and the radiation from an
362
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Welders Accessories
GAS IG
IGNIT
NITO
OR T
TRRIP
IPLLEX 2 P
PCCS F
FOOR G
GAAS W
WEELDING
176 633198
GAS IG
IGNIT
NITO
OR T
TRRIP
IPLLEX S
SPPARE F
FLLINT S
SEET. 10 P
PCCS
176 633206
Features
Can easily be mounted in the Triplex gas ignitor.
Ordering information
Supplied with: 10 pcs of the 3 int triangles giving a total of 30 spare ints.
363
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Welders Accessories
WELDERS C
CHA
HAL
LK, F
FLLAT 5X
5X13X
13X12
1277. 144 P
PCCS/P
/PA
ACK
196 632968
TEMP
MPEERATURE IND
INDIC
ICA
ATOR K
KIT
IT
196 633081
GALVANIZ
NIZING
ING S
SPPRAY. 6 P
PCCS
196 633156
Galvanizing spray 400 ml in a box, 6 pcs. Galvanizing spray for touching up pipes that have been
welded on.
364
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Welding, Brazing & Cutting Torch
UCT-500 C
CO
OMBMBINA
INAT
TIO
ION
NTTO
ORCH MA
MASSTER K
KIT
IT F
FOOR
GAS W
WEELDING
ING/C
/CUUTTING
170 500000
Features
Heavy duty PVC case
Orderly interior
Equipment ts together without the use of adapters
or use of outside tools
All items inside built according to international norms
Benets
Easy overview and access to content
No need to waist time looking for external tools
Long lasting quality and safe working environment
Dimension 435 x 380 x 125 mm A cutting attachment with four nozzles, covering cutting of
steel up to 100 mm are included, also a roller guide for
Weight 6.0 kg
cutting edges from 90 to 45 angle of plate surface. The
circular motion bar with centre tap allows for cutting circular
The Unitor combination torch is ideal for: holes up to 960 mm diameter.
Welding, Heating, Gouging, Flame cleaning, Soldering, In addition to spanner, cleaning needles and a spare parts kit
Cutting, Rivet burning, Flame straightening with all the most commonly needed spares, the UCT-500
The UCT-500 Master kit has been assembled to cover all Master kit contains an instruction booklet giving complete
ordinary acetylene / oxygen welding, brazing and cutting information on use and maintenance of the equipment.
work that may occur on board. It includes a range of eight The kit is assembled in a strong polyethylene case where
welding attachments, covering all welding applications from each component clicks into its reserved compartment for
less than 0.5 mm sheet metal up to 14 mm plate thickness. good protection.
The larger attachments also function as monoame heating
attachments.
Ordering information
Supplied with: Roller guide for 0-45 cutting angles, with spare
Torch components clamp sleeve and circular motion bar complete with
centre and sleeve for 84-960 mm diameters
UCT-500 shank with non-return valves, hose sockets
and hose clamps Torch maintenance equipment
Welding attachments: 40, 80, 230, 400, 650, 1000
Spanner 15-, 17-, 18-, 19-, 23- and 24 mm for
and 1250 nl/h
UCT-500
Cutting attachments 90 with spare nozzle screw and
Cleaning needle set for UCT-500 welding
nozzles for 3-10 mm, 10-25 mm, 25-50 mm and
attachments and cutting nozzles
50-100 mm steel thickness
Spare valve and complete O-ring set for UTC-500,
including spare coupling nut for welding attachments
365
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Welding, Brazing & Cutting Torch
UCT-500 C
CO
OMBMBINA
INAT
TIO
ION
NTTO
ORCH C
COOMP
MPA
ACT K
KIT
IT F
FOOR
GAS W
WEELDING
ING/C
/CUUTTING
170 500001
Features
Heavy duty PVC case
Orderly interior
Equipment ts together without the use of adapters
or use of outside tools
All items inside built according to international norms
Benets
Easy overview and access to content
No need to waist time looking for external tools
Long lasting quality and safe working environment
Dimension 375 x 300 x 105 mm The compact kit is recommended as an additional welding
and cutting outt on board. It is excellent for use with the
Weight 3.5 kg
portable gas welding equipment, and it may also be
mounted on the trolley for A-5/0-5 cylinders thereby making
The UCT compact kit contains the UCT-500 shank, the three the trolley a complete portable gas welding and cutting
most commonly used welding attachments (80 I, 230 I and workshop.
650 I) and the cutting attachment with nozzles for cutting up
The kit is assembled in a strong polyethylene case where
to 16 mm steel. Cleaning needles, spanner and full
each component clicks into its reserved compartment for
instructions for use and maintenance are also included.
good protection.
Ordering information
Supplied with:
Torch maintenance equipment
Torch components
Spanner 15-, 17-, 18-, 19-, 23- and 24 mm for
UCT-500 shank with non-return valves, hose sockets UCT-500
and hose clamps
Cleaning needle set for UCT-500 welding
Welding attachments: 80, 230 and 650 nl/h
attachments and cutting nozzles
Cutting attachments 90 with spare nozzle screw and
nozzles for 3-10 mm and 10-25 mm steel thickness
366
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Welding, Brazing & Cutting Torch
SHA
HANK
NK W
WIT
ITH
H NO
NON-R
N-RE
ETURN V
VA
ALVES F
FOOR A
AC
C/O
/OX
X
COMB
MBINA
INAT
TIO
ION
NTTO
ORCH
170 174656
Combination torch
Features
Simple and safe to use
Lightweight
Benets
Well balanced and easy to handle
All welding and cutting attachments will t the shank. It is the gas hoses. It balances well in the hand during welding
equipped with non-return valves to prevent reverse ow in and cutting operations.
NO
NONR
NRE
ETURN V
VA
ALVE
For mounting on UCT-500 shank in order to prevent back ow of gas into hose.
Ordering information
Product number Product name
597344 SHANK NONRETURN VALVE F/6MM OX HOSE
597336 SHANK NONRETURN VALVE F/6MM AC HOSE
651257 SHANK NONRETURN VALVE F/9MM OX HOSE
651265 SHANK NONRETURN VALVE F/9MM AC HOSE
619270 FLASHBACK ARRESTOR FR-20 FOR AC+OX
367
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Welding, Brazing & Cutting Torch
WELDING A
AT
TTACHME
HMENT
NTS
S
Ordering information
Product number Product name Material thickness mm
174565 WELDING ATTACHMENT 40 L <0.5
174573 WELDING ATTACHMENT 80L. 0.5-1
174581 WELDING ATTACHMENT 230 L 2-3
174599 WELDING ATTACHMENT 400 L 3-5
174607 WELDING ATTACHMENT 650 L 5-7
174615 WELDING ATTACHMENT 1000 L 7-10
174623 WELDING ATTACHMENT 1250 L 9-14
183756 HEATING ATTACHMENT 5000 L. for heating
183780 FLEX.WELD.ATTACHMENT 160L 1-2
183798 FLEX.WELD.ATTACHMENT 315L 2-4
183806 FLEX.WELD.ATTACHMENT 500L 4-6
MU
MULLTIF
IFLLAME HE
HEAATING A
AT
TTACHME
HMENT
NT
Ordering information
Product number Product name Size
603415 MULTIFLAME HEATING ATTACHMENT 1000L 0-A 1000
603407 MULTIFLAME HEATING ATTACHMENT 2500L 0-A 2500
603399 MULTIFLAME HEATING ATTACHMENT 5000L 0-A 5000
368
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Welding, Brazing & Cutting Torch
CUTTING A
AT
TTACHME
HMENT
NT W
WIT
ITH
H HE
HEAAD A
ANG
NGL
LE F
FOOR
UCT-500
Features
Adjustable towards shank
Slim and simple design
Made according to international norms
Benets
Able to reach difcult locations
Less strain on opperator
Provide safety and long lasting quality
Ordering information
Product number Product name
174664 CUTTING ATTACHMENT 75 DGR
234807 CUTTING ATTACHMENT 90 DGR
234815 CUTTING ATTACHMENT 0 DGR
Accessories
Product Number Product name
174698 CUTTING NOZZLE 3- 10MM
174706 CUTTING NOZZLE 10- 25MM
174714 CUTTING NOZZLE 25- 50MM
174722 CUTTING NOZZLE 50-100MM
174730 GOUGING NOZZLE
369
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Welding, Brazing & Cutting Torch
CUTTING NO
NOZ
ZZLE
Ordering information
Product number Product name Nozzle number Consuption OX nl/h Consumption AC nl/h
174698 CUTTING NOZZLE 3- 10MM No.2 1300 460
174706 CUTTING NOZZLE 10- 25MM No.3 2150 520
174714 CUTTING NOZZLE 25- 50MM No.4 5650 690
174722 CUTTING NOZZLE 50-100MM No.5 7800 810
183863 CUTTING NOZZLE 153MM LENGTH 25-40MM - 6000 450
183855 CUTTING NOZZLE 140MM LENGTH 40-75MM - 7000 800
GOUGING NO
NOZ
ZZLE
170 174730
370
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Welding, Brazing & Cutting Torch
GUID
IDEES
STTAND
NDA
ARD
Ordering information
Product number Product name
174672 ROLLER GUIDE STANDARD
174680 CIRCULAR MOTION BAR
SPARE P
PA
ART K
KIT
IT C
COOMP
MPLLETE
170 500100
Ordering information
Product number Product name
174789 VALVE ASSEMBLY BLUE FOR OXYGEN
613762 VALVE ASSEMBLY RED FOR ACETYLENE
535005 O-RINGS SET OF 4 F/WELD./CUTT. ATT.
174771 COUPLING NUT FOR SHANK ATTACHMENTS
174813 COUPLING SCREW FOR CUTTING NOZZLES
371
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Welding, Brazing & Cutting Torch
SPANNE
NNERRF
FOOR T
TO
ORCH
170 174649
CLEANING NE
NEEEDLES S
SEET F
FOOR T
TO
ORCH
176 175356
372
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Transportable Gas Welding Equipment
TROLLEY A
A40
40/O
/O40
40 G
GAAS W
WEELD.
176 176016
Features
Sturdy lightweight construction tted with large
rubber wheel
Cylinders rmly locked in place and secured
Tested and certied for lifting
Benets
Can fast and easy be brought to work locations
Prevents accidents caused by cylinders falling over
Can safely be lifted
This trolley is specially designed for on board use. The sturdy cylinders is a paramount demand, the trolleys are tested and
but lightweight construction of steel pipes is fully galvanized certied according to the International Labour Ofce for the
for corrosion protection. The trolley takes both 40 I and 50 I test and examination of lifting gear used in the loading and
size cylinders, which are rmly secured in the trolley by unloading of ships. The trolleys are test loaded to 400 kg,
means of two clamps with wing screws. As the weight of and certied for safe working load (S.W.L.) 200 kg.
two full gas cylinders is approximately 150 kilos, the trolley Being intended to function as a complete mobile gas
has been tted with extra large rubber wheels for easy welding workshop, the trolley is tted with a large, lockable
mobility. For transport by crane the trolley is tted with a accessories box. Weight of the trolley itself is 28 kilos.
lifting bow. As safety in transportation and lifting of gas
Accessories
For a complete, portable welding workshop the following
items should be ordered (in addition to 40 litre gas cylinders
and the consumables required):
373
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Transportable Gas Welding Equipment
TROLLEY 1 S
SUU-10
176 176008
Features
Sturdy lightweight construction tted with rubber
wheel
Cylinder rmly locked in place and secured
Tested and certied for lifting
Benets
Fast and easy transportation
Prevents accidents caused by cylinders falling over
Can safely be lifted
The use of special lifting / transport devices for gas cylinders and carry the trolley with cylinder attached, there is ample
is required by several marine authorities. holding space for 2 to 4 persons.
Unitor's cylinder trolley SU-10 is specially designed for on The trolley is tested and certied according to the
board use when lifting or transporting International Labour Ofce for the testing and examination of
40 l and 50 l cylinders. lifting gear used in the loading and unloading of ships.
The cylinder is easily positioned in the trolley and locked in Test load 200 kg. Safe Working Load (S.W.L.) 100 kg.
place with three wing screws. Note: Unitor has also developed a trolley for two 40/50 l
The strong lightweight steel construction is fully corrosion cylinders for use on board as a mobile equipment or for
protected by galvanizing. Large rubber wheels ensure easy transportation of cylinders.
transport along deck, and should it be necessary to lift up
374
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Transportable Gas Welding Equipment
TROLLEY A
A--5/O
/O--5 G
GAASWELD F
FOOR P
POORTABLE
EQUIP
IPME
MENT
NT
176 534982
Features
Sturdy lightweight construction tted with rubber
wheel
Cylinders rmly locked in place and secured
Tested and certied for lifting
Benets
Fast and easy transportation
Prevents accidents caused by cylinders falling over
Can safely be lifted
It is specially designed by Unitor for on board use, and has a Unitor rod containers give the possibility to include a
low center of gravity which will keep it standing upright even selection of four different rod types when transporting.
at 30 out of vertical with all equipment mounted. The trolley is tested and certied according to the
The strong lightweight steel construction is hot zinc coated International Labour Ofce for the testing and examination of
for high corrosion resistance. It is tted with solid rubber lifting gear used in the loading and unloading of ships.
wheels for easy transport. Handles at top and bottom Test load 100 kg. Safe Working Load (S.W.L.) 50 kg.
ensure easy carrying and lifting. Two double brackets for
Accessories
For a complete, portable welding workshop the following
items should be ordered (in addition to 5 litre gas cylinders
and the consumables required):
375
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Transportable Gas Welding Equipment
BACK P
POORTABLE R
RAACK F
F//A5- +05-
+05-CCYL.
176 176040
Features
Sturdy lightweight construction
Cylinders rmly locked in place and secured
Benets
Can be brought to work locations quickly and easily
Prevents accidents caused by cylinders falling over
Accessories
For a complete, portable unit the following items should be
ordered (in addition to 5 litre gas cylinders and the
consumables required):
376
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Transportable Gas Welding Equipment
PORTABLE R
RAACK F
FOOR A
A5+05
5+05 C
CYYLIND
INDEER
176 176032
Features
Sturdy lightweight construction
Cylinders rmly locked in place and secured
Benets
Can be brought to work locations quickly and easily
Prevents accidents caused by cylinders falling over
Accessories
For a complete, portable unit the following items should be
ordered (in addition to 5 litre gas cylinders and the
consumables required):
377
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Transportable Gas Welding Equipment
STAND
NDAARD G
GAAS A
AC
CCESSORIE
IESSF
FOOR MO
MOBBIL
ILEE
EQUIP
IPME
MENT
NT
176 526509
Features
Equipment ts together without the use of adaptors
All items in accordance with international regulations
Benets
No need to order additional parts- one order number
Long lasting quality and a safe working environment
378
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Transportable Gas Welding Equipment
PORTABLE W
WEELDING T
TA
ABLE
176 176024
Features
Legs can be detached and fastened under table
Adjustable legs length
Sturdy design made of steel fully galvanised
Holding clamp
Benets
Easily transported and stored
Stable work surface
Long lasting high quality
Able to weld on small work pieces
Technical data workpieces. To ensure a stable work surface all four legs are
adjustable in length. The legs have pointed ends to ensure
Width 600mm high friction and a good hull contact when used for arc
Depth 400mm welding.
Height 630mm (folded: 80mm) The table is excellent for use as a welding table in
Weight 14kg workshops on board, and in cases when it is needed
outside the workshop it is easily transported as the legs may
This sturdy worktable is made of steel and fully galvanized be detached and fastened under the table surface.
for corrosion protection. It includes a holding clamp for small
379
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Welding Cabinet
GASWELDING C
CAABINE
INETTE
EMP
MPT
TY
094 589846
Features
Compact design
Sturdy and corrosion resistant
Large storing capacity
Benets
Easy overview and access to content
Long lasting with no maintenance
Opportunity to customise content to vessel
requirements
380
GASWELDING C CA
ABINE
INETTC
COOMP
MPLLETE W
WIT
ITH
HTTO
ORCH,
RODS & F
FLLUXES
094 589861
Features
Compact design
Sturdy and corrosion resistant
Broad range of gas welding and cutting equipment,
gas welding rods, brazing rods and uxes
Benets
Easy overview and access to content
Long lasting with no maintenance
Ordering information
Supplied with: Bronze brazing: FC Bronze 2,0 mm 1,0 kg, 3,0 mm
1,0 kg. Bronze 3,0 mm 4,0 kg FC-Wearbro 3,0 mm
Torch maintenance equipment: Spanner 15-, 17-, 1,0 kg, 5,0 mm 1,0 kg. One box each of Bronzeux
18-, 19-, 23- and 24 mm for UCT-500 Cleaning and Wearbroux
needle set for UCT-500 welding attachments and
cutting nozzles Spare valve and complete O-ring set Cast iron joining and rebuilding: FC-Cast Iron, ux
for UTC-500, including spare coupling nut for welding coated brazing rod, 4,0 mm 1,0 kg
attachments Aluminium joining:
Welders accessories: Gas goggles with lift front. Alumag 3,0mm/0,5kg and one box Aluux
Softskin welding gloves for gas and TIG welding. Gas Tin soldering: Tin-240 soft solder on spool 1,6mm/
ignitor triplex. Double row steel wire brush. 0,5kg
Silver brazing: AG-60 2,0 mm 0,5 kg. AG-45 2,0 mm Mild steel/heat resistant steels: MS 2,0 mm 3,5 kg,
0,4 kg. One box each AG-60/45 ux for general use MS 3,0 mm 3,5 kg and Icromo 2,5 mm 2 kg
and Albroux for use with AG-60 on Yorcalbro
Instructions and information: Unitor handbook for
maritime welders
381
MA
MARRINE P
PRRODUCTS Gas Welding, Brazing & Cutting
Gas Welding and Brazing Consumables
GAS W
WEELDING A
AND
ND B
BRRAZING C
COONS
NSUUMA
MABBLES
Ordering information
Product Product
number name Description
539551 MS-200 2.0 X Gas welding rod for welding of unalloyed structural steel with a carbon content of less than 0.2%
500M 3,5KG
539569 MS-200 3.0 X Gas welding rod for welding of unalloyed structural steel with a carbon content of less than 0.2%
500MM 3,5KG
514265 ALUMAG 235 3.0 Gas welding rod for wrought and cast aluminium alloys containing up to 5 % Mg. Generally it can be used for all cast
X 500MM 0,5KG alloys containing magnesium as the main alloying element.
233601 AG 60 252 2.0 X A ux coated cadmium free, seawater resistant, high strength silver rod for joining all types of steel, stainless steel,
500 MM copper, copper alloys, nickel, nickel alloys, cast iron, Yorcalbro pipes (aluminiumbrass), cunifer pipes type 90/10 and 70/
30.
519744 AG 45 253 2.0 X Bare cadmium free silver rod for joining of all types of steel, stainless steel, copper, copper alloys, nickel and nickel
500MM 0,4KG alloys, cast iron and hard match. This brazing rod gives a very good joint and can be used for brazing nipples, sleeves
and unions to copper pipes.
233551 FC-BRONZE 261 A ux-coated brazing rod for joining and surfacing copper, brass, bronze, aluminium bronze, cast iron and steel. May be
2.0 X500MM used for brazing galvanized steel without destroying the galvanized surface.
1,0KG
233569 FC-BRONZE A ux-coated brazing rod for joining and surfacing copper, brass, bronze, aluminium bronze, cast iron and steel. May be
2613.0 X 500MM used for brazing galvanized steel without destroying the galvanized surface.
1,0KG
174326 BRONZE-264 3.0 An easy-owing, universal brazing bronze (brass) rod for the brazing of steel, cast iron, copper and copper alloys, nickel
X 500MM 1,7KG and nickel alloys. It gives a very smooth and attractive surface. The addition of Si, Mn and Sn guarantees a strong and
high-quality deposit.
514240 BRONZE-264 5.0 An easy-owing, universal brazing bronze (brass) rod for the brazing of steel, cast iron, copper and copper alloys, nickel
X 500MM 1,0KG and nickel alloys. It gives a very smooth and attractive surface. The addition of Si, Mn and Sn guarantees a strong and
high-quality deposit.
233577 FC-WEARBRO 262 A ux-coated wear-resistant bronze rod used for applying a hard-wearing surface to bronze, brass, copper, steel, cast
3.0 X500MM iron and malleable cast iron. Also used for braze welding cast iron.
1,0KG
382
Product Product
number name Description
233585 FC-WEARBRO 262 A ux-coated wear-resistant bronze rod used for applying a hard-wearing surface to bronze, brass, copper, steel, cast
5.0 X500MM iron and malleable cast iron. Also used for braze welding cast iron.
1,1KG
682310 FC-CAST IRON Flux coated rod for joining and surfacing cast iron and brazing cast iron to steel. Oil impregnated cast iron may also be
268S 4.0X450MM brazed with FC-Castiron 268.
0,7KG
603043 ALUFLUX 234 F. Flux for gas welding rod Alumag-235 on aluminium
250 G
603050 AG-60/45 FLUX Flux for silver brazing rods AG-60-252 and AG-45-253
252 PF.250G
603076 BRONZE-FLUX Flux for brazing rod Bronze-264 and FC-Bronze-261
261 PF. 250G
603068 WEARBRO-FLUX Flux for brazing rod FC-Wearbro-262
262 PF. 250G
604371 ALBRO-FLUX 263 Flux for silver brazing rod AG-60-252 on Yorcalbro
PF 250G
777937 TIN 241 AG 1.5 Flux cored lead free silver alloyed soft solder wire on spool for tinning and joining of electric conductors, electrical
MM O.5 KG connections, electrical instruments, radios, batteries, refrigeration plants, etc.
SOLDER
383
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Arc welding/cutting machines
UWI-
I-150
150 A
AU
UTOLINE W
WEELDING INV
INVEERTER
191 709659
Benets
Portable
Safe in use
Efcient
Minimal corrosion damage, minimal internal
contamination - long product lifespan
384
Ordering information
Supplied with:
UWI-150 AutoLine welding machine
1 pc carrying strap
2m primary cable, mounted on the welding machine
3m welding cable with dix 25 quick connector and electrode holder
3m return cable with dix 25 quick connector and return clamp
Instruction manual
Accessories
Product number Product name
Welder's accessories:
767000 AUTOVISION PLUS FRESHAIR WELDSHIELD
767001 AUTOVISION PLUS WELDING SHIELD
709485 FLIPVISION WELDING FACE SHIELD
619098 FACE SHIELD W/HANDLE
633248 SHADE 9 GLASS. 5SET
633255 SHADE 10 GLASS. 5SET
633263 SHADE 11 GLASS. 5SET
632786 WELDERS GLOVES. 6 PAIRS
632976 WIRE BRUSH STEEL. 6PCS
632984 WIRE BRUSH STAINL. 6PCS
633008 CHIPPING HAMMER ST. 2PCS
632992 CHIPPING HAMMER STAINLESS
516161 WELDING GAUGE TYPE J
TIG welding accessories:
719575 REMOTE CONTROL FOR UWI-150 AUTOLINE
150000 TIG TORCH T-150 W.DIX 25 CONNECTOR
607810 ACCESSORIES KIT TIG TORCH
510010 REGULATOR 510 AR/CO2 FLOW 0-35L/MIN
619379 MANOMETER/GAUGE GUARD +
597328 FLOWCONTROL METER, ARGON
597310 FLOWCONTROL VALVE, ARGON
632794 TIG GLOVES. 6 PAIRS
576157 GAS HOSE 1/4" 6.3MM BLACK
175596 HOSE JOINT F/6MM (1/4 INCH) OX HOSE
729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS
385
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Arc welding/cutting machines
UWW-16
1611 MP MU
MULLTI P
PRROCESS W
WEELDING INV
INVEERTER
193 161161
Benets
Portable and efcient, safe in use
Welding current range MIG/MAG 5-160 A Fully portable, only 12 kg net weight. 1 phase 230 V
Wire speed range MIG/MAG 2-13 m/min 16A for use anywhere on board
Voltage adjustment range MIG/MAG 10-26 V Safe in use- voltage reduction function reduces
touchable open circuit voltage to 10 V
Welding current range TIG 5-140 A Individual stepless adjustment of both wire speed and
Welding current range MMA 5-140 A welding voltage through whole adjustment range
Open circuit voltage (OCV) 16 V provides optimal settings for any wire
Select between softer or crisper arc on the front
Duty cycle at max current 30%
panel to optimize the wire welding arc
Electric phase 1 phase 2-step or 4-step trigger function for wire welding
Power supply voltage 230 operator comfort
Power supply cycles 50/60 Hz 2-step TIG-torch control with lift-arc start and
adjustable gas post-ow
Recommended fuses (slow) 16 A
Polarity selection allows for wire welding with all wires
Certifying authority/institution S, CE including self-shielding wires without shielding gas,
Recommended fuses (slow) 10 A and even for TIG welding with + polarity
IP protection 23 S Automatic hot start and arc force control provides
easy start and a stable arc in MMA modus
Weight 12,6
Protection against both overload and high input
Length 460 mm voltage, with indicator light on the front panel,
Width 230 mm prevents machine damage from wrong primary
Height 325 mm voltage and overheating
Ordering information
Supplied with:
2,5 m primary cable with plug, tted on the welding machine.
Gas hose socket with nut and hose clamp for connection to the gas inlet of the machine
Wire welding torch with 3m cable and Euro connector complete for 0,8 mm wire
Electrode holder for MMA (stick) electrode welding with 2.5m cable and Dix 25 connector
3 m return cable with Dix 25 connector and return clamp
Adjustable carrying strap
Instruction manual
386
Accessories
Product number Product name
Welder's accessories:
767000 AUTOVISION PLUS FRESHAIR WELDSHIELD
709485 FLIPVISION WELDING FACE SHIELD
619098 FACE SHIELD W/HANDLE
633248 SHADE 9 GLASS. 5SET
633255 SHADE 10 GLASS. 5SET
633263 SHADE 11 GLASS. 5SET
632992 CHIPPING HAMMER STAINLESS
633008 CHIPPING HAMMER ST. 2PCS
632984 WIRE BRUSH STAINL. 6PCS
632976 WIRE BRUSH STEEL. 6PCS
632786 WELDERS GLOVES. 6 PAIRS
516161 WELDING GAUGE TYPE J
Gas supply accessories:
510010 REGULATOR 510 AR/CO2 FLOW 0-35L/MIN
619379 MANOMETER/GAUGE GUARD +
576157 GAS HOSE 1/4" 6.3MM BLACK
175596 HOSE JOINT F/6MM (1/4 INCH) OX HOSE
729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS
597310 FLOWCONTROL VALVE, ARGON
597328 FLOWCONTROL METER, ARGON
Wire welding accessories:
161163 MIG/MAG TORCH M-161 W/3M CABLE
590075 NONIRON LINER 1,2MM FOR UWW-160
613746 STEEL LINER F.UP TO 1.2MM F.UWW-160
160004 DRIVEROLL U-GROOVE FOR UWW 161
160005 DRIVEROLL KNURLED V-GR.FOR UWW 161
160003 DRIVEROLL V-GROOVE FOR UWW 161
161164 OUTOING WIRE GUIDE TUBE F. UWW-161
633149 ANTI SPATTER SPRAY. 6PCS
591990 MULTI-PURPOSE PLIER FOR WIRE TORCH
160001 GAS NOZZLE FOR UWW-160
712018 10 TIPS 1,0-1.2MM FOR UWW-160 TORCH
711994 10 TIPS 0.8MM FOR UWW-160 TORCH
711200 UNITOR BACKVAC
711986 10 TIPS 0.6MM FOR UWW-160 TORCH
TIG welding accessories:
160010 TIG TORCH T-161 WITH EUROCONNECTOR
607810 ACCESSORIES KIT TIG TORCH
632794 TIG GLOVES. 6 PAIRS
387
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Arc welding/cutting machines
UWI-
I-20
203
3SST
TIC
ICK
K/T
TIG
IG
191 203203
Benets
Portable
Safe in use
Efcient
Technical data Safe in use with open circuit voltage below the 70 V
limit set by the code of safe working practices for
Welding current range MMA 5-200 A DC merchant seamen
Open circuit voltage (OCV) 65 V Automatic hot start for stick arc starts makes arc
Duty cycle at max current 30 % striking easy and prevents electrode sticking
Adjustable arc force for stick electrode welding allows
Electric phase 3 phase
the arc characteristics to be changed for specic
Power supply voltage 380/440 applications and electrodes: low arc force setting for
Power supply cycles 50/60 Hz smooth running electrodes like LH and Special and
Recommended fuses (slow) 10 A increased setting provides optimal characteristics for
stiffer, more penetrating electrodes like E6010 types,
Certifying authority/institution S,CE
chamfering electrodes like CH2 and electrodes for
IP protection 23 S ACA gouging
Weight 12.2 kg Lift-start in TIG mode provides easy and soft TIG arc
Length 460 mm starting
Stepless adjustment of welding current through
Width 230 mm
whole current range: 5 200A
Height 325 mm Casing of high grade aluminium and industrial plastic
to eliminate corrosion damage also contributes to low
weight which together with compact outer
Features
dimensions provides good portability
Connects to any primary voltage between 380 and Wind tunnel design for the internal cooling air ow
440 V without need for any action from the operator protects electrical components and PC boards from
Line voltage compensation keeps output of the dirt, dust, and debris, greatly improving reliability
power source constant regardless of uctuation in Thermal overload protection with indicator lights
input power from 10% below lowest to above highest helps prevent machine damage if the duty cycle is
rated input voltage exceeded or airow is blocked
388
Ordering information
Supplied with:
1 pc carrying strap
4m primary cable, mounted on the welding machine
3m welding cable with quick connector and electrode holder
3m return cable with quick connector and return clamp
Instruction manual
Accessories
Product number Product name
Stick welding accessories:
767000 AUTOVISION PLUS FRESHAIR WELDSHIELD
709485 FLIPVISION WELDING FACE SHIELD
619098 FACE SHIELD W/HANDLE
633248 SHADE 9 GLASS. 5SET
633255 SHADE 10 GLASS. 5SET
633263 SHADE 11 GLASS. 5SET
632786 WELDERS GLOVES. 6 PAIRS
632976 WIRE BRUSH STEEL. 6PCS
632984 WIRE BRUSH STAINL. 6PCS
633008 CHIPPING HAMMER ST. 2PCS
632992 CHIPPING HAMMER STAINLESS
516161 WELDING GAUGE TYPE J
TIG welding accessories:
200000 TIG TORCH T-200 W.DIX 70 CONNECTOR
607810 ACCESSORIES KIT TIG TORCH
510010 REGULATOR 510 AR/CO2 FLOW 0-35L/MIN
619379 MANOMETER/GAUGE GUARD +
597328 FLOWCONTROL METER, ARGON
597310 FLOWCONTROL VALVE, ARGON
632794 TIG GLOVES. 6 PAIRS
576157 GAS HOSE 1/4" 6.3MM BLACK
729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS
389
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Arc welding/cutting machines
UWR-30
3033W
WEELDING R
REECTIF
IFIE
IER
R
191 670430
Features
Dual process: stick electrode and TIG welding
characteristics with lift-arc start
Safe in use, open circuit voltage only 5 V
Remote control option provides ability to adjust
amperage during welding
Adjustable arc force control
Automatic anti-stick function
Overload protection with indicator light
Strong lifting gear and solid rubber wheels
Technical data to when used on board for heavy steel repairs on deck, in
tanks and in cargo holds.
Welding current range 5-300 A The three-phase transformer is thoroughly impregnated with
Open circuit voltage 5V a special varnish for full corrosion protection. The silicon
Duty cycle at max current 35% rectier bridge is tted with screw-in diodes and thyristors,
and all electronics are completely enclosed and protected
Electric phase 3
outside the cooling air ow.
Power supply voltage 230/380/440 V
The electronic control circuits are designed to compensate
Power supply cycles 50/60 Hz for main voltage uctuations and voltage drop in long
Recommended fuses (slow) 35/20/16 A welding cables to ensure a constant and stable welding arc.
Certifying authority/institution S,CE Continuous adjustment of welding current and arc force
IP protection IP 23 provides optimal welding properties with all coated rutile,
Weight 95 kg basic or cellulose electrodes, and also electrodes for non-
iron alloys and chamfering.
Length 680 mm
Width 450 mm Lift-Arc function without high-frequency for TIG welding
ensures easy arc start, free from electromagnetic
Height 450 mm interference.
Remote control option provides ability to adjust amperage
Conventional welding rectier designed for maximum
during welding.
durability under the rough conditions that it may be exposed
Ordering information
Supplied with:
3 m primary cable
Lifting gear with cable winding frame
Under carriage with two large wheels and support
390
Accessories
Product number Product name
Stick welding accessories:
767000 AUTOVISION PLUS FRESHAIR WELDSHIELD
709485 FLIPVISION WELDING FACE SHIELD
619098 FACE SHIELD W/HANDLE
633248 SHADE 9 GLASS. 5SET
633255 SHADE 10 GLASS. 5SET
633263 SHADE 11 GLASS. 5SET
632786 WELDERS GLOVES. 6 PAIRS
632976 WIRE BRUSH STEEL. 6PCS
632984 WIRE BRUSH STAINL. 6PCS
633008 CHIPPING HAMMER ST. 2PCS
632992 CHIPPING HAMMER STAINLESS
516161 WELDING GAUGE TYPE J
TIG welding accessories:
200000 TIG TORCH T-200 W.DIX 70 CONNECTOR
607810 ACCESSORIES KIT TIG TORCH
510010 REGULATOR 510 AR/CO2 FLOW 0-35L/MIN
619379 MANOMETER/GAUGE GUARD +
597328 FLOWCONTROL METER, ARGON
597310 FLOWCONTROL VALVE, ARGON
632794 TIG GLOVES. 6 PAIRS
576157 GAS HOSE 1/4" 6.3MM BLACK
729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS
391
ACCESSORIE
IESSF
FOOR U
UWWR-30
3033
191 676908
Ordering information
Product number Product name
Supplied with:
594317 RETURN CLAMP ASSY 400A W/DIX 70
594325 EL.HOLDER 400A WITH DIX70 CONNECTOR
676916 REMOTE CONTROL FOR UWR-303
676924 REMOTE CONTROL CABLE 10M F/ UWR-303
709485 FLIPVISION WELDING FACE SHIELD
Welding gloves
Chipping hammer steel
Wire brush steel two rows
Accessories
Product number Product name
645408 EXTENSION CABLE 25M 4 PIN
392
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Arc welding/cutting machines
UWI-
I-400
400 W
WEELDING INV
INVEERTER
191 670398
Benets
Multi-functional
Safe in use
Efcient
Ordering information
Supplied with:
3 m primary cable
Instruction manual
393
Accessories
Product number Product name
Accessories kit:
670406 ACCESSORIES FOR UWI-400
Stick welding accessories:
767000 AUTOVISION PLUS FRESHAIR WELDSHIELD
709485 FLIPVISION WELDING FACE SHIELD
619098 FACE SHIELD W/HANDLE
633248 SHADE 9 GLASS. 5SET
633255 SHADE 10 GLASS. 5SET
633263 SHADE 11 GLASS. 5SET
632786 WELDERS GLOVES. 6 PAIRS
632976 WIRE BRUSH STEEL. 6PCS
632984 WIRE BRUSH STAINL. 6PCS
633008 CHIPPING HAMMER ST. 2PCS
632992 CHIPPING HAMMER STAINLESS
516161 WELDING GAUGE TYPE J
Remote control cable extension
670422 EXTENSION CABLE A 25 M
TIG welding accessories:
200000 TIG TORCH T-200 W.DIX 70 CONNECTOR
607810 ACCESSORIES KIT TIG TORCH
510010 REGULATOR 510 AR/CO2 FLOW 0-35L/MIN
619379 MANOMETER/GAUGE GUARD +
597328 FLOWCONTROL METER, ARGON
597310 FLOWCONTROL VALVE, ARGON
632794 TIG GLOVES. 6 PAIRS
576157 GAS HOSE 1/4" 6.3MM BLACK
729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS
Wire welding accessories (Gas supply accessories as for TIG is required):
657106 UWF-SC12RC WIRE FEEDER
607451 WIRE TORCH T-400 MP W/3M CABLE
394
ACCESSORIE
IESSF
FOOR U
UWWI-
I-400
400
191 670406
Ordering information
Product number Product name
670406 ACCESSORIES FOR UWI-400
Supplied with:
594317 RETURN CLAMP ASSY 400A W/DIX 70
594325 EL.HOLDER 400A WITH DIX70 CONNECTOR
670414 REMOTE CONTROL FOR UWI-400
709485 FLIPVISION WELDING FACE SHIELD
Welding gloves
Chipping hammer steel
Wire brush steel two rows
NB!
Remote control product number 670414 must be used
when using UWI 400 for TIG welding.
Accessories
Product number Product name
670422 EXTENSION CABLE A 25 M
395
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Arc welding/cutting machines
UWF-S
-SCC 12 R
RCCW
WIR
IRE
EFFE
EEDER
193 657106
Features
Spool sizes 200 mm to 300 mm can be used
With an optional spool adaptor wire coils which are
delivered without spools can be used
Spools are completely protected inside the case
Takes wire sizes from 0.6 mm to 2 mm including ux-
cored wires and gasless wires
Delivered with euro-connector for torch and 3 m
connection cables and gas hose for connection to
UWI-400MP
Drive roll kit for 0,8 mm wires are included with the
feeder
Benets
Compact and lightweight for easy access to narrow spaces on board
Power supply from UWI-400 24 V AC 3,5A SC 12 RC is delivered equipped for use with 0,8 mm solid
wire. Torch is not included with the unit.
Welding current rating 500A 100% duty cycle
Wire speed range 1,3-17,8 M/MIN
Wire size range 0,6-2 MM
IP protection IP 23
Length 508 mm
Width 203 mm
Height 394 mm
Weight 11.6 kg
Ordering information
Supplied with:
3 m connection cables and hoses for connection to the machine
V-groove 0.8 mm (0.030") drive roll kit
Compression spring for spools
Euro-connector for torch
NB! Torch is not included and must be ordered separately
396
Accessories
Product number Product name Unit
607451 WIRE TORCH T-400 MP W/3M CABLE pcs
Torch spares:
613765 GAS NOZZLE FOR TORCH pcs
594622 CONTACT TIP 0.8 MM set of 10
594630 CONTACT TIP 1.0-1.2 MM set of 10
607455 CONTACT TIP 1.2-1.4MM set of 10
607456 CONTACT TIP 1.6-2.0MM set of 10
613766 NOZZLE INSULATOR F/T-400 set of 5
613763 GAS DIFFUSOR F/T-400 set of 5
613764 NECK INSULATION F.T-400 set of 5
594606 TORCH LINER,TEFLON,0.8-1.2 MM, 4.5 pcs
594614 TORCH LINER,STEEL, 0.8-1.2 MM 3.0 pcs
607457 TORCH LINER, STEEL, 1.4-2.0MM,3.2 pcs
Drive roll kits for SC 12 RC ( 0,8mm V-groove is included with the unit):
603118 DRIVEROLLKIT V-GROOVE 0.8MM .030IN set
603340 DRIVEROLLKIT V-GROOVE 1,2MM .045IN set
603373 DRIVEROLLKIT V-GROOVE 1,6MM 1/16IN set
603142 DRIVEROLLKIT V-KNURLED 0.9MM .035IN set
603126 DRIVEROLLKIT V-KNURLED 1,8MM .07 IN set
603134 DRIVEROLLKIT U-GROOVE 0,9MM .035IN set
603498 DRIVEROLLKIT U-GROOVE 1,6MM 1/16IN set
Cable/hose extensions for use between UWI-400 and SC 12 RC:
670422 EXTENSION CABLE A 25 M pcs
175844 WELDING CABLE 50 MM2 mtr
632893 CABLE CONNECTOR DIX70 MALE-FEMALE pcs
576157 GAS HOSE 1/4" 6.3MM BLACK mtr
175596 HOSE JOINT F/6MM (1/4 INCH) OX HOSE pcs
729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS pcs
397
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Arc welding/cutting machines
UWR-85
8522W
WEELDING R
REECTIF
IFIE
IER
R
191 735860
Benets
Safe in use
Efcient
Ordering information
Supplied with:
Instruction manual
NOTE:
Primary cable is not included.
398
Supplied with:
Fixed installation is recomended on the primary side.
Welding cable connection to the machine is done with cable shoes
Accessories
Product number Product name
Remote control:
670414 REMOTE CONTROL FOR UWI-400
670422 EXTENSION CABLE A 25 M
Cables and connectors:
655266 WELDING CABLE 95 MM2
738633 CABLE SHOE 95MM2 10PCS
736744 CABLE CONNECTOR DIX120 MALE-FEMALE
Air carbon arc accessories:
767000 AUTOVISION PLUS FRESHAIR WELDSHIELD
709485 FLIPVISION WELDING FACE SHIELD
619098 FACE SHIELD W/HANDLE
633248 SHADE 9 GLASS. 5SET
633255 SHADE 10 GLASS. 5SET
633263 SHADE 11 GLASS. 5SET
632786 WELDERS GLOVES. 6 PAIRS
740969 AIR CARBONARC TORCH HEAVYDUTY 1600A
175745 RETURN CLAMP 800A
Stick welding accessories:
511006 ELECTRODE HOLDER UNIKING 600AMP
632976 WIRE BRUSH STEEL. 6PCS
632984 WIRE BRUSH STAINL. 6PCS
633008 CHIPPING HAMMER ST. 2PCS
632992 CHIPPING HAMMER STAINLESS
516161 WELDING GAUGE TYPE J
TIG welding accessories:
200000 TIG TORCH T-200 W.DIX 70 CONNECTOR
607810 ACCESSORIES KIT TIG TORCH
510010 REGULATOR 510 AR/CO2 FLOW 0-35L/MIN
619379 MANOMETER/GAUGE GUARD +
597328 FLOWCONTROL METER, ARGON
597310 FLOWCONTROL VALVE, ARGON
632794 TIG GLOVES. 6 PAIRS
576157 GAS HOSE 1/4" 6.3MM BLACK
729442 HOSE CLAMP FOR 1/4" HOSE (10 PCS
399
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Arc welding/cutting machines
UPC-104
10411 P
PLLASMA C
CUUTTER
192 404100
Features
Best performance to weight ratio on the market:
40mm cutting capacity - weight 16 kg
Ergonomic robust torch with safety trigger and slim
nozzle design for good overview of the cut
6 m torch cable connected directy inside the
machine to reduce size and weight and eliminate
screw connector wear
Power switch with built in quick fuse and air regulator
with built in self draining water separator for
protection of machine
Active fan control provides forced air cooling only
when needed, minimizing dust intake
Benets
Uses air as cutting gas thereby reducing the need for oxygen and acetylene gas
Can easily and quickly be brought to work locations
All current carrying materials can be cut or gouged
Technical data Ideal for cutting and gouging all electrically conductive
materials. Superior to gas cutting as it also cuts stainless
Cutting current range 20-100A steel, cast iron, copper alloys and aluminum.
Duty cycle at max current 35%
The UPC-1041 is compact and lightweight to move around
Electric phase 3 on board with its size of 560 x 190 x 320 mm. Cutting
Power supply voltage 440 (400) capacity of up to 40 mm thick steel ensures complete cut
Recommended fuses (slow) 20 A (25 A) also through thick bulbs in beams. Impressive cutting speed
of more than half a meter per minute (13mm steel plate).
Power supply cycles 50/60 Hz High duty cycle and tolerance to ambient temperature will
Supply pressure 6-7 bar normally provide completely uninterrupted operation for
Setting on machine at free ow 5.0 bar manual cutting.
Air consumption 190 L/min ( 11,4 m3/h) The slim nozzle design gives exceptionally good overview of
IP protection IP 23 the actual cutting arc and provides minimal slag clogging.
Highly efcient for gouging out old welds and opening up
Certication (approval) CE
cracks with the optional gouging nozzle.
Length 560 mm
Width 190 mm
Height 320 mm
Weight 16 kg
Working pressure 5 bar
400
Ordering information
Supplied with:
3 pcs electrodes
1 pc tool for electrodes
3 pcs nozzles 1,2
1 pc spatter shield
1 pc drag shield
Accessories
Product number Product name
404114 TORCH WITH 6M CABLE FOR UPC-1041
404115 TORCH WITH 15M CABLE FOR UPC-1041
404005 ELECTRODE LONG F/UPC-1040/1041 5PCS
n/a TOOL FOR ELECTRODE CHANGE
404006 SWIRL RING FOR UPC-1040/1041 2PCS
404007 NOZZLE 1.0 F/UPC-1040/1041 5PCS
404008 NOZZLE 1.2 F/UPC-1040/1041 5PCS
404009 NOZZLE GOUGING F/UPC-1040/1041 5PCS
404010 SHIELD CUP F/UPC-1040/1041 2PCS
404111 SPATTER SHIELD F/UPC-1040/1041 2PCS
404112 DRAG SHIELD F/UPC-1040/1041 2PCS
404016 CIRCLE CUTT. GUIDE F/ UPC-1040/1041
404013 CONSUMABLES KIT F/UPC-1040/1041
401
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Cables and Connectors
WELDING C
CAABLE
Features
Unitor welding cable is oil resistant, ame resistant
and wear resistant. The conductor is built up from
0.2 mm diameter copper wires to ensure high
exibiIity
The Unitor welding cable complies with the
harmonised standard HO1N2D for exible welding
cable
The cable is available in cross-section areas 35 mm2,
50 mm2 and 70 mm2, in standard lengths of 10 m,
20 m and 50 m, tted with Unitor safety connectors
or DIX connectors on request
The standard length cable extensions are tted with
Unitor safety cable connectors for optimal protection. Connection to the machine panel sockets is done with 2 pcs
Dix/Unitor conversions
When cable extensions with safety connectors are used the electrode holder and ground clamp with safety
connectors should be used
Welding cables used on board, on deck or in an engine basis. It is recognized by its marking at regular intervals with
room, are exposed to rough weather, oil and mechanical the text Unitor oil resistant welding cable, size of cable,
wear. The welding cable supplied by Unitor has wear, ame and the standard for welding cable H01N2-D. H01N2-D.
and oil-resistant insulation on a polychloroprene rubber
Ordering information
Product number Product name Max Amp 35% duty cycle Weight per 100 m
175836 WELDING CABLE 35 MM2 375 A 41.5 kg
175794 WELDING CABLE 35 MM2 10M 375 A 41.5 kg
175786 WELDING CABLE 35 MM2 20M 375 A 41.5 kg
175844 WELDING CABLE 50 MM2 480 A 57 kg
175828 WELDING CABLE 50 MM2 10M 480 A 57 kg
175810 WELDING CABLE 50 MM2 20M 480 A 57 kg
175802 WELDING CABLE 50 MM2 50M 480 A 57 kg
175851 WELDING CABLE 70 MM2 600 A 78.5 kg
320002 WELDING CABLE 70 MM2 10M 600 A 78.5 kg
320010 WELDING CABLE 70 MM2 20M 600 A 78.5 kg
183665 WELDING CABLE 70 MM2 50M 600 A 78.5 kg
655266 WELDING CABLE 95 MM2 730 A 106 kg
402
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Cables and Connectors
CABLE C
COONNE
NNECCTOR
Ordering information
Product number Product name
632885 CABLE CONNECTOR DIX25 MALE-FEMALE
632893 CABLE CONNECTOR DIX70 MALE-FEMALE
736744 CABLE CONNECTOR DIX120 MALE-FEMALE
513044 CABLE CONNE.SAFETY COMPL
CABLE S
SHO
HOE
E
Ordering information
Product number Product name
632919 CABLE SHOE 35 MM2. 10PCS
632927 CABLE SHOE 50 MM2. 10PCS
632935 CABLE SHOE 70MM2. 10PCS
738633 CABLE SHOE 95MM2 10PCS
403
ADAPTER P PL
LUG D
DIX
IX F
FEEMA
MALLE 7
700A
AND
ND MA
MALLE 25; 2
PCS P
PEER P
PA
ACK
195 633073
PARALLEL C CO
ONNE
NNECCTING TTHR
HREEE WWAAY C
CO
ONNE
NNEC
CTOR
DIX
IX770 MA
MALLE-F
-FEEMA
MALLE-F
-FEEMA
MALLE 2 P
PCCS
195 632901
CONV
NVEERSIO
IONNA
ASSSEM. 2 P
PCCS
195 634121
404
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Cables and Connectors
REMO
MOT
TE C
COONT
NTRROL F
FOOR U
UWWR-30
3033W
WIT
ITH
HBBE
ELT C
CLLIP
191 676916
Features
Control box with regulating wheel for use when doing
electrode welding or TIG welding
No need using time going back and forward to
welding machine for regulating amperage
Accessories
Product number Product name
676924 REMOTE CONTROL CABLE 10M F/ UWR-303
REMO
MOT
TE C
COONT
NTRROL C
CAABLE 10M F
FOOR U
UWWR-30
3033
191 676924
Accessories
Product number Product name
676916 REMOTE CONTROL FOR UWR-303
645408 EXTENSION CABLE 25M 4 PIN
405
EXTENS
NSIO
ION
NCCA
ABLE 25M 4 P
PIN
IN F
FOOR U
UWWR-30
3033
REMO
MOT
TE CCO
ONT
NTR
ROLS
191 645408
Accessories
Product number Product name
676924 REMOTE CONTROL CABLE 10M F/ UWR-303
REMO
MOTTE C
COONT
NTRROL F
FOOR U
UWWI-
I-400
400 F
FOOR E
ELL
HO
HOLLDER/T
/TIG
IG T
TO
ORCH
191 670414
Features
Fits easily to electrode holder for TIG torch or wire
torch
Regulating wheel for adjustment of current
Benets
Saves time when regulating amperage
Better control of weld quality when you are able to regulate amperage during welding
Accessories
Product number Product name
670422 EXTENSION CABLE A 25 M
406
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Cables and Connectors
EXTENS
NSIO
ION
NCCA
ABLE A 25 M F
FOOR U
UWWI-
I-400
400 R
REEMO
MOT
TE
CONT
NTRROLS
191 670422
Cable for extending the distance between UWI-400 remote control to welding machine. Extention
control cable 25m, for use to extend distance between UWI-400 and remote control, or the wire feeder
SC12RC.
Accessories
Product number Product name
670414 REMOTE CONTROL FOR UWI-400
PARALLEL C
COONNE
NNECCTIO
IONNC
CAABLE F
FOOR U
UWWI-
I-400
400
REMO
MOT
TE C
COONT
NTRROLS
191 676973
Cable for parallel connection of the remote control outlets for two UWI-400 to be able to use one
remote control to adjust both machines when the welding outlets are connected in parallel.
Important: switched on the current in the parallel cable can damage the
If in parallel connection of two UWI 400 machines, both other machine.
machines must be switched on. If only one machine is
Accessories
Product number Product name
670414 REMOTE CONTROL FOR UWI-400
670422 EXTENSION CABLE A 25 M
407
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Stick electrode arc accessories
ELECTRODE HO
HOLLDER A
ASSSEMB
MBLLY
Ordering information
Product number Product name
627877 EL.HOLDER 200A WITH DIX25 CONNECTOR
627885 EL.HOLDER 200A WITH DIX70 CONNECTOR
594325 EL.HOLDER 400A WITH DIX70 CONNECTOR
522680 EL.HOLDER 400A WITH SAFETYCONNECTOR
528703 AIR CARBON ARC TORCH 600A
740969 AIR CARBONARC TORCH HEAVYDUTY 1600A
ELECTRODE HO
HOLLDERS
Ordering information
Product number Product name
552497 ELECTRODE HOLDER TWISTY 200AMP
513051 ELECTRODE HOLDER TWISTY 400AMP
511006 ELECTRODE HOLDER UNIKING 600AMP
408
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Stick electrode arc accessories
AIR C
CAARBON AAR
RC TTO
ORCH 600A W
WIT
ITH
HSSA
AFETY A
AND
ND
AIR C
COONNE
NNECCTIO
IONN
196 528703
A special jaw-type electrode holder is used for air carbon arc Supplied with:
gouging. The jaws are tted with nozzles, which direct jets of
compressed air parallel with the electrode to the molten Integrated compressed air hose/welding cable
pool. Cable connectors
Quick connector 30UPH for compressed air
The holder is also equipped with a cut-off valve for
compressed air. Compressed air supply of 400900 L/min at
a pressure of approximately 57 bar. The holder will accept
round and at electrodes.
AIR C
CAARBON A
ARRC T
TO
ORCH HE
HEAAVYDUTY 1600A
196 740969
The jaws are tted with nozzles, which direct jets of Supplied with:
compressed air parallel with the electrode to the molten
pool. The holder is also equipped with a cut-off valve for Integrated compressed air hose/welding cable
compressed air. Compressed air supply of 400900 L/min at Cable connectors
a pressure of approximately 57 bar. The holder will accept Quick connector 30UPH for compressed air
round and at electrodes.
409
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Stick electrode arc accessories
RETURN C
CLLAMP A
ASSSEMB
MBLLY
Ordering information
Product number Product name
633164 RETURN CLAMP ASSY 200A W/DIX 25
633172 RETURN CLAMP ASSY 200A W/DIX 70
594317 RETURN CLAMP ASSY 400A W/DIX 70
633180 RETURN CLAMP ASSY 400 A W/SAFETY
RETURN C
CLLAMP
MPSS
Ordering information
Product name Product number
RETURN CLAMP 200A 653881
RETURN CLAMP 400A. 653899
RETURN CLAMP 600 A 653907
RETURN CLAMP 800A 175745
410
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
TIG Welding Accessories
TIG W
WEELDING A
AC
CCESSORIE
IESS
The most frequently used applications are welding of Clean, smooth welds of high quality, with little need
aluminium-brass (Yorcalbro), Cunifer, and stainless, heat for nishing (no slag).
resistant or acid resistant steels, but the process may be
used with good results on practically all weldable materials. The TIG equipment
Among the unique advantages of using the argon gas Unitor's TIG equipment is easy and uncomplicated to use. It
protected TIG arc as heat source for welding are: may be used with UWR-rectiers and touch-start of the
welding arc, or with UWI-inverters with the advantage of lift
An easy-to-learn method which may be used in all arc start.
positions. Apart from the welding machine, a complete TIG-equipment
set consists of a supply of argon gas, gas regulator with
A stable, intense and well directed heat supply which
ow-meter, TIG torch and an accessories kit.
ensures deep penetration and small heat affected
zones.
Ordering information
Product number Product name
150000 TIG TORCH T-150 W.DIX 25 CONNECTOR
160010 TIG TORCH T-161 WITH EUROCONNECTOR
200000 TIG TORCH T-200 W.DIX 70 CONNECTOR
607810 ACCESSORIES KIT TIG TORCH
Accessories
Product number Product name
551192 SHORT BACK CAP FOR TIG-TORCH
551200 LONG BACK CAP FOR TIG-TORCH
551168 COLLET 1,6MM FOR TIG-TORCH
551150 COLLET 2,4MM FOR TIG-TORCH
551184 COLLET BODY 1,6MM FOR TIG-TORCH
551176 COLLET BODY 2,4MM FOR TIG-TORCH
551135 TIG NOZZLE 6 FOR TIG-TORCH
551127 TIG NOZZLE 7 FOR TIG-TORCH
674710 TUNGSTEN EL. 1.6MM. 10PCS
674736 TUNGSTEN EL. 2.4MM. 10PCS
411
TIG T
TO
ORCH-T
H-T--150 W D
DIX
IX 25 C
CO
ONNE
NNEC
CTOR
197 150000
Features
The torch is rated at a full 150A welding current at
100% duty cycle- at lower duty cycles higher current
may be used
The handle ensures a secure grip and reduces heat
transfer to the welders hand
A screw type gas valve opens fully at only 3/4 turn,
switches the gas on and off
Being gas cooled, the torch has low weight and is
easy to operate for repair and maintenance work in
all positions
Unitor supplies nozzles of aluminium oxide (AL203), recognisable by the pink colour. These nozzles will stand for
higher temperatures than the ordinary ceramic cups, which are recognised by a light brown color. Note that TIG gas
nozzles are brittle and may break if dropped or treated carelessly
A remote amperage control can be xed on the TIG torch by velcro straps in order to adjust amperage during
welding
The torch is equipped with an on/off switch and screw type gas valve.
Ordering information
Supplied with: onto the Unitor argon regulator or to the standard
right hand threaded screw couplings for gas hoses
4 m cable/hose package- separate welding cable
and gas hose ensure that extensions may be easily The torch is equipped with an on/off switch and screw type
connected gas valve.
A standard Unitor DIX 25 connector is mounted on
the welding cable, and the gas connection ts directly
Accessories
Product number Product name
Remote control equipment:
719575 REMOTE CONTROL FOR UWI-150 AUTOLINE
Spare parts available for purchase:
551192 SHORT BACK CAP FOR TIG-TORCH
551200 LONG BACK CAP FOR TIG-TORCH
551168 COLLET 1,6MM FOR TIG-TORCH
551150 COLLET 2,4MM FOR TIG-TORCH
551184 COLLET BODY 1,6MM FOR TIG-TORCH
551176 COLLET BODY 2,4MM FOR TIG-TORCH
551135 TIG NOZZLE 6 FOR TIG-TORCH
551127 TIG NOZZLE 7 FOR TIG-TORCH
674710 TUNGSTEN EL. 1.6MM. 10PCS
674736 TUNGSTEN EL. 2.4MM. 10PCS
412
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
TIG Welding Accessories
REMO
MOT
TE C
COONT
NTRROL F
FOOR U
UWWI-
I-150
150 A
AU
UTOLINE
191 719575
Features
Fits easily to TIG torch
Regulating wheel for adjustment of current
Benets
Fast to mount on TIG torch
No need to stop in order to adjust amperage
Improves weld quality
413
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
TIG Welding Accessories
TIG T
TO
ORCH T
T--16
1611 W
WIT
ITH
H4MC CA
ABLE, E
EUURO
CONNE
NNECCTOR AAND
ND T TOORCH MO
MOUUNT
NTEED T
TRRIG
IGGGER
193 160010
Features
The torch is rated at a full 161 amp welding current
at 100% duty cycle. At lower duty cycles higher
current may be used
The handle ensures a secure grip and reduces heat
transfer to the welders hand. A torch mounted
trigger opens and closes the argon selenoid valve in
order to control the gas ow, and also controls
current on/off
Being gas cooled, the torch has low weight and is easy to operate for repair and maintenance work in all positions
Unitor supplies nozzles of aluminium oxide (AL203), recognizable by the pink colour. These nozzles will stand for
higher temperatures than the ordinary ceramic cups, which are recognized by a light brown color. Note that TIG gas
nozzles are brittle and may break if dropped or treated carelessly
Ordering information
Supplied with 4 m cable package with euro connector.
Accessories
Product number Product name
Spare parts available for purchase:
551192 SHORT BACK CAP FOR TIG-TORCH
551200 LONG BACK CAP FOR TIG-TORCH
551168 COLLET 1,6MM FOR TIG-TORCH
551150 COLLET 2,4MM FOR TIG-TORCH
551184 COLLET BODY 1,6MM FOR TIG-TORCH
551176 COLLET BODY 2,4MM FOR TIG-TORCH
551135 TIG NOZZLE 6 FOR TIG-TORCH
551127 TIG NOZZLE 7 FOR TIG-TORCH
674710 TUNGSTEN EL. 1.6MM. 10PCS
674736 TUNGSTEN EL. 2.4MM. 10PCS
414
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
TIG Welding Accessories
TIG T
TO
ORCH T
T--200 W D
DIX
IX 7
70
0CCO
ONNE
NNEC
CTOR
197 200000
Features
The torch is rated at a full 200A welding current at
100% duty cycle. At lower duty cycles higher current
may be used
The handle ensures a secure grip and reduces heat
transfer to the welders hand. A screw type gas valve
opens fully at only 3/4 turn, switches the gas on and
off
Being gas cooled, the torch has low weight and is
easy to operate for repair and maintenance work in
all positions
Unitor supplies nozzles of aluminium oxide (AL203), recognizable by the pink colour. These nozzles will stand for
higher temperatures than the ordinary ceramic cups, which are recognized by a light brown color. Note that TIG gas
nozzles are brittle and may break if dropped or treated carelessly
A remote amperage control can be xed on the TIG torch by velcro straps in order to adjust amperage during
welding
Ordering information
Supplied with: A standard Unitor DIX 70 connector is mounted on
the welding cable, and the gas connection ts directly
4 m cable/hose package. Separate welding cable onto the Unitor argon regulator or to the standard
and gas hose ensure that extensions may be easily right hand threaded screw couplings for gas hoses.
connected
The torch is equipped with a screw type gas valve.
Accessories
Product number Product name For use with:
Remote control equipment:
670414 REMOTE CONTROL FOR UWI-400 UWI-400
670422 EXTENSION CABLE A 25 M UWI-400 REMOTE AMP EXTENTION CABLE
676916 REMOTE CONTROL FOR UWR-303 UWR-303
676924 REMOTE CONTROL CABLE 10M F/ UWR-303 UWR-303
645408 EXTENSION CABLE 25M 4 PIN UWR-303 REMOTE AMP EXTENTION CABLE
Spare parts available for purchase:
551192 SHORT BACK CAP FOR TIG-TORCH
551200 LONG BACK CAP FOR TIG-TORCH
551168 COLLET 1,6MM FOR TIG-TORCH
415
Product number Product name For use with:
551150 COLLET 2,4MM FOR TIG-TORCH
551184 COLLET BODY 1,6MM FOR TIG-TORCH
551176 COLLET BODY 2,4MM FOR TIG-TORCH
551135 TIG NOZZLE 6 FOR TIG-TORCH
551127 TIG NOZZLE 7 FOR TIG-TORCH
674710 TUNGSTEN EL. 1.6MM. 10PCS
674736 TUNGSTEN EL. 2.4MM. 10PCS
416
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
TIG Welding Accessories
ACCESSORIE
IESSK
KIT
IT T
TIG
IG T
TO
ORCH
197 607810
Ordering information
Supplied with: Collet body 2.4mm 1 pcs
Alumina nozzle 6 2 pcs
Short back cap 1 pcs Alumina nozzle 7 2 pcs
Heat-shield 1 pcs Tungsten electrodes 1.6 mm alloyed for DC TIG
ColIet 1.6mm 3 pcs welding 3 pcs
CoIlet 2.4mm 3 pcs
Collet body 1.6 mm 1 pcs
417
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
TIG Welding Accessories
TUNG
NGS
STEN EEL
LECTRODE 1.
1.6MM
6MM A
ALLLOYED F
FOOR D
DCC
TIG W
WEELDING
197 674710
Features
Environmentally friendly- no radioactive components
Can be transported, stored and disposed of without
legal restrictions
Suitable for welding all materials
Better ignition performance than thorium alloyed type
electrodes
Low burn off rate, longer service life
Standardised in national and international norms (ISO 6848, EN 26848, AWS A5.12, JlS Z3233)
Thoriated TIG welding electrodes with 2 % thorium oxide when grinding the electrode tip (grinding dust). In the near
(colour code red) are currently the most widely used future, more stringent legal regulations regarding production,
electrodes worldwide. Thorium is however a radioactive use and disposal of thoriated electrodes are expected. It is
element and as such represents a potential danger to health expected that TlG-welding electrodes containing thorium will
and environment. Thorium is a so-called a-emitter, but disappear from the market in the foreseeable future,
when enclosed in a tungsten matrix, the a radiation especially as an environmentally friendly and technically
emitted externally is negligible. The danger to the welder better solution is already available. Unitor tungsten
arises when thorium oxide gets into the respiratory canals. electrodes are alloyed with Lanthanum (colour code gold)
This problem can occur during welding (vapours) as well as and are sold in sturdy boxes of 10 pcs.
TUNG
NGS
STEN EEL
LECTRODE 2.
2.4MM
4MM A
ALLLOYED F
FOOR D
DCC
TIG W
WEELDING
197 674736
Features
Environmentally friendly- no radioactive components
Can be transported, stored and disposed of without
legal restrictions
Suitable for welding all materials
Better ignition performance than thorium alloyed type
electrodes
Low burn off rate, longer service life
Standardised in national and international norms (ISO 6848, EN 26848, AWS A5.12, JlS Z3233)
418
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Wire Welding Accessories
WIR
IRE
ETTOORCH T
T--400 W
WIT
ITH
H 3M C
CAABLE F
FOOR S
S--12R
12RCC/
S-22 P
P12/U
12/UW
WF-MP
193 607451
Features
High capacity air cooled torch
Adjustable neck
Ergometric handgrip
Benets
No need for water cooling pump system
Able to reach difcult locations
Less strain on operator
The torch has an adjustable neck and is delivered complete tips for 0,8-1,2mm wire. The teon liner allows for all wire
with tools for neck adjustment and contact tip change. It is types including aluminium.
delivered with a 3m cable, complete with liner and contact
Accessories
Product number Product name Unit Qty.
613765 GAS NOZZLE FOR TORCH pcs 1
594622 CONTACT TIP 0.8 MM set 10
594630 CONTACT TIP 1.0-1.2 MM set 10
607455 CONTACT TIP 1.2-1.4MM set 10
607456 CONTACT TIP 1.6-2.0MM set 10
613766 NOZZLE INSULATOR F/T-400 set 5
613763 GAS DIFFUSOR F/T-400 set 5
613764 NECK INSULATION F.T-400 set 5
594606 TORCH LINER,TEFLON,0.8-1.2 MM, 4.5 pcs 1
594614 TORCH LINER,STEEL, 0.8-1.2 MM 3.0 pcs 1
607457 TORCH LINER, STEEL, 1.4-2.0MM,3.2 pcs 1
419
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Wire Welding Accessories
DRIV
IVEEROLL AAND
ND W WIR
IREEG
GUUID
IDEEK
KIT
ITS
SFFO
OR W
WIR
IRE
E
FEEDER SSC
C 12 R
RCC
Ordering information
Product Number Product name FOR UNITOR WELDING WIRE
603118 DRIVEROLLKIT V-GROOVE 0.8MM .030IN GSP-W-200 0.8MM
IALBRO-W-237 0.8MM
ICUNI-W-239 0.8MM
603340 DRIVEROLLKIT V-GROOVE 1,2MM .045IN
603373 DRIVEROLLKIT V-GROOVE 1,6MM 1/16IN
603142 DRIVEROLLKIT V-KNURLED 0.9MM .035IN MS-W201 1.0MM
S-316M-GF-221 0.9MM
S-309M-GF-222 0.9MM
603126 DRIVEROLLKIT V-KNURLED 1,8MM .07 IN HST-SF-232 1.7MM
ABRATECH-W-230 1.6MM
603134 DRIVEROLLKIT U-GROOVE 0,9MM .035IN ALUMAG-W-235 1.0MM
603498 DRIVEROLLKIT U-GROOVE 1,6MM 1/16IN
420
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Wire Welding Accessories
SPOOL C
COOMP
MPRRESSIO
IONNS
SPPRING
193 602821
SPOOL A
ADDAPTER
193 602839
421
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Wire Welding Accessories
WIR
IRE
ETTO
ORCH M-
M-16
1611 W
WIT
ITH
H 3M C
CAABLE AAND
ND
EUROCONNENNEC
CTOR F FO
OR UUW
WW-161611 MP
193 161163
Accessories
Product number Product name
160001 GAS NOZZLE FOR UWW-160
711986 10 TIPS 0.6MM FOR UWW-160 TORCH
711994 10 TIPS 0.8MM FOR UWW-160 TORCH
711200 UNITOR BACKVAC
712018 10 TIPS 1,0-1.2MM FOR UWW-160 TORCH
590075 NONIRON LINER 1,2MM FOR UWW-160
613746 STEEL LINER F.UP TO 1.2MM F.UWW-160
DRIV
IVEER
ROOLL
Ordering information
Product number Product name
160003 DRIVEROLL V-GROOVE FOR UWW 161
160004 DRIVEROLL U-GROOVE FOR UWW 161
160005 DRIVEROLL KNURLED V-GR.FOR UWW 161
161164 OUTOING WIRE GUIDE TUBE F. UWW-161
422
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Shielding gas accessories
ARGON R
REEGULATOR
197 510010
Features
Provides constant ow of gas at correct pressure
Safety valve
Comes with hose connections for 1/4"
Built according to international norms
Benets
No need for adjustment during work
Provides safe working conditions
Connects to all standard hose dimensions
Long lasting quality
Technical data type. Both contents gauge and ow meter are clearly graded
in psi/bar and l/min.
All regulators are delivered with spare washers, hose
Max.inlet pressure bar 200 connection for 1/4" gas hose and instructions for use.
Outlet ow l/min: 0-32 l/min
Safety outlet opens at bar 6.0-7.8 Easy identication of gas types with colour coded
adjustment knobs
Max. capacity m3/h 2
Immediate identication of gas pressures with easy to
Cylinder connection 24.32 x 1/14" read gauges marked both in psi and bar
Full capacity for all types
Unitor Argon cylinder regulators for Argon/Argon Co2 are Designed for use with Unitor gas cylinders
designed for reliability and safety of use. The large Full conformance with EN ISO 2503
adjustment knobs are black for easy identication of gas
Accessories
Product number Product name
550160 WASHER ALU 10 PCS FOR OX REGULATOR
550178 CONTENTS GAUGE OX/AR 0-400 BAR
550210 WORKING GAUGE AR/CO2 0-32L/MIN
619379 MANOMETER/GAUGE GUARD +
423
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Shielding gas accessories
CO2 R
REEGULATOR
193 510012
Features
Provide constant ow of gas at rigth pressure
Safety valve
Comes with hose connections for 1/4" and
Built according to international norms
Benets
No need for adjustment during work
Provide safe working conditions
Connects to all standard hose dimensions
Long lasting quality
Max.inlet pressure bar 200 All regulators are delivered with spare washers, hose
connection for 1/4" gas hose and instructions for use.
Outlet ow l/min: 0-32 l/min
Safety outlet opens at bar 20 Easy identication of gas types with colour coded
adjustment knobs
Max.capacity m3/h 40
Immediate identication of gas pressures with easy to read
Cylinder connection CGA320/0.825"-14 NGO-RH-EXT
gauges marked both in psi and bar
Full capacity for all types
Unitor C02 regulators for Co2 gas are designed for reliability
and safety of use. The large adjustment knobs are black for Designed for use with Unitor gas cylinders
easy identication of gas type. Both contents gauge and Full conformance with EN ISO 2503
ow meter are clearly graded in psi/bar and l/min.
Accessories
Product number Product name
550160 WASHER ALU 10 PCS FOR OX REGULATOR
550178 CONTENTS GAUGE OX/AR 0-400 BAR
550210 WORKING GAUGE AR/CO2 0-32L/MIN
619379 MANOMETER/GAUGE GUARD +
424
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Shielding gas accessories
FLOWCONT
NTRROL NE
NEEEDLE V
VA
ALVE F
FOOR G
GAAS F
FLLOW
ADJUSTME
MENT
NT
197 597310
FLOWCONT
NTR
ROL ME
METTER, A
ARRGON F
FOOR U
USSE A
AT
T
TORCH NO
NOZ
ZZLE
197 597328
425
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Plasma cutting accessories
CONS
NSUUMA
MABBLES K
KIT
IT C
COOMP
MPLLETE F
FOOR U
UPPC-1040
192 404013
Ordering information
Product number Product name
404013 CONSUMABLES KIT F/UPC-1040/1041
The kit includes:
3 pcs electrodes
1 pcs tool for electrodes
3 pcs nozzles 1,2
1 pcs spatter shield
1 pcs drag shield
ACCESSORIE
IESSF
FOOR U
UPPC-1040
1040/104
/10411
Ordering information
Product number Product name
404014 TORCH WITH 6 M CABLE FOR UPC-1040
404114 TORCH WITH 6 M CABLE FOR UPC-1041
404015 TORCH WITH 15 M CABLE FOR UPC-1040
404115 TORCH WITH 15 M CABLE FOR UPC-1041
404016 CIRCLE CUTTING GUIDE FOR UPC-1040
404005 ELECTRODE LONG FOR UPC-1040 5 PCS
404007 NOZZLE 1.0 20-50A F/UPC-1040 5 PCS
404008 NOZZLE 1.2 50-100A F/UPC-1040 5 PCS
404009 NOZZLE GOUGING 2.5 F/UPC-1040/1041 5 PCS
404006 SWIRL RING FOR UPC-1040 2 PCS
404010 SHIELD CUP FOR UPC-1040 2 PCS
404011 SPATTER SHIELD FOR UPC-1040 2 PCS
404111 DRAG SHIELD LONG FOR UPC-1040 2 PCS
404112 DRAG SHIELD LONG FOR UPC-1041 2 PCS
426
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Current distribution system
CURRENT D
DIS
IST
TRIB
IBUUTIO
IONNS
SY
YSTEM
Unitor welding current distribution system may be tailor Correct welding parameters are easily obtainable as
made to suit the specic needs of ship or offshore all the remote control possibilities of the welding
installations. The basic rule in this system is that the main machine is available at the outlet
welding power source(s) are located permanently in the
workshop. The welding machine will be connected to the The inlet/outlets are made in stainless steel quality. The
inlet station in the distribution system by ying leads, when hinged door is closed with a key. The remote control socket
welding outside the work shop. Permanently installed is a 10 pole amphenol type, female for both inlet and outlet
welding and remote control cables lead to the welding stations. The socket is equipped with a screw cover. The
outlets, which are mounted on strategic places for remote control connection is done with a special connection
immediate use by the welders on board, providing the cable and/or adaptor. A red diode 130 V AC is placed
following advantages: between the welding terminals to warn when outlet is live.
The housing is mounted to the bulkhead by use of brackets
Accidental falling/tripping due to loose cables along that are included with the inlets / outlets. Installation, with
decks, in ladders etc. are avoided size and positions of cable glands will vary for different
installations, therefore glands are not included, and holes for
Accidental short circuiting somewhere along the often
cable glands have not been drilled / locked out in the
excessive lengths of live welding cables lying about is
housing. This must be done by the installer. Connection of
prevented
welding cables in the inlet/outlet is done with cable shoes.
The need for replacement of damaged lengths of Cable size must be chosen according to welding machine.
welding cable is eliminated There is a 10 position connection rail for connection of
Manhandling of long welding cables, often more time remote control cable. Minimum 1,0 mm2 cable for remote
consuming and strenuous than the actual welding control is recommended. The system comes in two sizes,
job, is avoided for 400A and 800A. The 400A boxes uses standard Dix 70
contacts for welding current, male on inlet station and
Fire and gas proof doors can be kept shut female on the outlet, and standard Dix 70 cable connectors
Outlets in possible gas danger areas may be are used for connection. The 800A boxes use special heavy
disconnected when not in use duty Dix 120 contacts for welding current, male on inlet
station and female on the outlet. For these contacts the
Permanently installed and correctly dimensioned
special Dix 120 cable connectors must be used. These
cables ensure more efcient use of power from
connectors allow for up to 120mm2 welding cable
welding machine
Ordering information
Product Number Product name
624320 INLET STATION WELDING CURRENT 400A
624338 OUTLET STATION WELDING CURRENT 400A
736728 INLET STATION WELDING CURRENT 800A
736736 OUTLET STATION WELDING CURRENT 800A
608760 REMOTE CONNECTION CABLE FOR UWI-400
603993 REMOTE CONNECTION CABLE FOR UWR-303
604157 REMOTE CONTROL ADAPTER FOR UWI-400
604306 REMOTE CONTROL ADAPTER FOR UWR-303
632893 CABLE CONNECTOR DIX70 MALE-FEMALE
736744 CABLE CONNECTOR DIX120 MALE-FEMALE
427
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Current distribution system
INL
INLEET S
STTATIO
IONNW
WEELDING C
CUURRENT 400A
195 624320
Inlet station in a current distribution system 400A. Connection point for ying leeds from the welding
machine.
Benets
Being part of the current distribution system:
Welding and return cables are placed in cable trays
No damage to cables
Accidental falling/tripping due to loose cables along decks are avoided
Accidental short circuiting of live welding cables is prevented
Less time consuming manhandling of welding cables
Fire and gas proof doors can be kept shut
No need for replacement of damaged cables
Technical data 400A and uses standard Dix 70 male contacts. The remote
control socket is a 10 poole amphenol type female for the
Height 230mm inlet station. The socket is equipped with a screw cover. A
Width 230mm red diode 130V AC is placed between the welding terminals
Depth 150mm to warn when inlet station is live. The housing is mounted to
the bulkhead by use of brackets that are included with the
inlet station.
The inlet stations are made of stainless steel quality. The
hinged door is closed with a key. The inlet station is rated for
428
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Current distribution system
OUTLET S
STTATIO
IONNW
WEELDING C
CUURRENT 400A
195 624338
Benets
Being part of the current distribution system:
Welding and return cables are placed in cable trays
No damage to cables
Accidental falling/tripping due to loose cables along
decks are avoided
Accidental short circuiting of live welding cables is
prevented
Fire and gas proof doors can be kept shut
No need for replacement of damaged cables
429
INL
INLEET S
STTATIO
IONNW
WEELDING C
CUURRENT 800A
195 736728
Inlet station in a current distribution system 800A. Connection point for ying leeds from the welding
machine.
Features
Being part of the current distribution system:
Welding and return cables are placed in cable trays
No damage to cables
Accidental falling/tripping due to loose cables along decks are avoided
Accidental short circuiting of live welding cables is prevented. Less time consuming manhandling of welding cables
Fire and gas proof doors can be kept shut
No need for replacement of damaged cables
Technical data 800A and uses Dix 120 male contacts. The remote control
socket is a 10 poole amphenol type female for inlet station.
Height 300mm The socket is equipped with a screw cover. A red diode
Width 300mm 130V AC is placed between the welding terminals to warn
Depth 200mm when inlet station is live. The housing is mounted to the
bulkhead by use of brackets that are included with the inlet
station.
The inlet stations are made of stainless steel quality. The
hinged door is closed with a key. The inlet station is rated for
OUTLET S
STTATIO
IONNW
WEELDING C
CUURRENT 800A
195 736736
Outlet station in a current distribution system 800A. Connection point for the welding and return cables.
Features
Being part of the current distribution system:
Welding and return cables are placed in cable trays
No damage to cables
Accidental falling/tripping due to loose cables along decks are avoided
Accidental short circuiting of live welding cables is prevented. Less time consuming manhandling of welding cables
Fire and gas proof doors can be kept shut
No need for replacement of damaged cables
Technical data for 800A and uses Dix 120 female contacts. The remote
control socket is a 10 poole amphenol type female for outlet
Height 300mm station. The socket is equiped with a screw cover. A red
Width 300mm diode 130V AC is placed between the welding terminals to
Depth 200mm warn when inlet station is live. The housing is mounted to
the bulkhead by use of brackets that are included with the
inlet station.
The outlet stations are made of stainless steel quality. The
hinged door is closed with a key. The outlet station is rated
430
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Current distribution system
REMO
MOT TE C
COONNE
NNECCTIO
ION
NCCAABLE F
FOOR U
UWWI-
I-400
400 6M, 14
PIN F
FEEMA
MALLE/10 P
PIN
IN MA
MALLE
191 608760
6m cable with amphenol contact for connecting welding machine to the inlet station.
Features
Correct welding parameters are easily obtainable as all the remote control possibilities of the welding machine are
available at the outlet station.
REMO
MOT
TE CCO
ONNE
NNEC CTIO
IONNCCA
ABLE F
FOOR U
UWWR-30
3033 6M, 4
PIN MA
MALLE/10 P
PIN
IN MA
MALLE
191 603993
6m cable with amphenol contact for connecting welding machine to the inlet station.
Features
Correct welding parameters are easily obtainable as all the remote control possibilities of the welding machine is
available at the outlet station.
431
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Current distribution system
REMO
MOTTE C
COONT
NTR ROL AAD
DAPTER F
FOOR U
UWWI-
I-400
400 14 P
PIN
IN
FEMA
MALLE/10 P
PIN
IN MA
MALLE
191 604157
Adapter for outlet station remote control and UWI-400 / UWR-852 remote control cable.
Features
Correct welding parameters are easily obtainable as all the remote control possibilities of the welding machine is
available at the outlet station.
Ordering information
The remote control adapter is tted between outlet station and remote control cable.
REMO
MOTTE C
COONT
NTR ROL AAD
DAPTER F
FOOR U
UWWR-30
30334P
PIN
IN
FEMA
MALLE/10 P
PIN
IN MA
MALLE
191 604306
Adapter for outlet station remote control and UWR-303 remote control cable
Features
Correct welding parameters are easily obtainable as all the remote control possibilities of the welding machine is
available at the outlet station.
432
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Protection
AUTOVIS
ISIO
IONNP
PLLUS F
FRRESH A
AIR
IR W
WEELDSHIE
HIELLD W
WIT
ITH
H
RESPIR
IRAATORY UUNIT
NIT
196 767000
Features
Air pump respiratory unit
Automatic darkening lter glass
Adjustable shade of darkness
Darkening lter powered by solar panel (the light from
the arc)
Conforms to relevant standards
Benets
Gives user clean ltered air and prevents fume inhalation and accidents
Protects welder from developing " arc eye". More accurate start location when welding is to commence
Same face shield can be used for all arc welding processes and amperage settings
No need for battery change or charging
Provides safety and long lasting quality
This shield is the AutoVision Plus with respiratory unit. It CE approved and conforms to EN 12941-TH2P. The fan
gives the user clean, ltered air inside the helmet, and battery recharges in 2-4 hours and will provide up to 220
prevents inhalation of welding fumes. The airow will keep litres per minute for at least 8 hours.
the user fresh and let him concentrate on the work. The kit is
Accessories
Product number Product name
766997 AUTOVISION PLUS OUTSIDE COVER LENS
766998 AUTOVISION PLUS HEADBAND COMPLETE
766999 AUTOVISION PLUS FRESHAIR HEADGEAR
767002 AUTOVISION PLUS FRESHAIR FACE SEAL
767003 AUTOVISION PLUS FRESHAIR FILTER
Approvals
CE
433
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Protection
AUTOVIS
ISIO
ION
NPPL
LUS W
WEELDING S
SHIE
HIEL
LD
196 767001
Features
Automatic darkening lter glass
Adjustable shade of darkness
Darkening lter powered by solar panel (the light from
the arc)
Conforms to relevant standards
Benets
Protects welder from developing " arc eye". More
accurate start location when welding is to
commence
Same face shield can be used for all arc welding
processes and amperage settings
No need for battery change or charging
Provide safety and long lasting quality
The basis is a lightweight well designed shield which allows Replaceable inside and outside protective lenses, headband
good air ow for the welder, and a head band that allows and the sweatband for the headband is available as a spare.
unique possibilities for adjustment: The shield is equipped with a light powered quick automatic
darkening glass that switches from low shade (4) to selected
Distance to face shade within to selected dark state within 0,4 milliseconds
Angle in relation to face (0,0004 sec). The low shade state allows for good vision
while chipping slag, grinding and repositioning for next arc
Height on head striking. Dark mode is adjusted with a knob at the side of the
Head diameter shield, from shade 9 to 13 which is from the lowest TIG
welding settings (5-10A) to extreme processes at + 400A arc
Stay-up friction
current.
Accessories
Product number Product name
766997 AUTOVISION PLUS OUTSIDE COVER LENS
766998 AUTOVISION PLUS HEADBAND COMPLETE
434
FLIP
IPVVIS
ISIO
ION
NWWE
ELDING F
FAACE SSHIE
HIEL
LD W
WIT
ITH
H
HE
HEAADBAND A AND
ND S
SHA
HAD
DE 11 G
GLLASS
196 709485
Features
Flip up frame
Lightweight design
Adjustable headband
Conform to relevant standards
Benets
Protects welder when chipping slag and when
grinding
Comfortable to use
Fits all head sizes
Provide safety and long lasting quality
The Flipvision face shield with head band tted with a ip-up supplied as standard with the shield. A welder should bear in
front frame. mind that proper protection is absolutely necessary to guard
himself against the danger of ultra-violet rays and bits of
A clear safety glass is placed in the xed frame under the
welding slag in the eye.
ip-up frame protecting the eyes when chipping slag. The
ip-up front frame is tted with a lter shade glass with Unitor face shields for welding are made from a lightweight,
shade selected according to welding current used. The lter robust plastic material which is unaffected by heat, cold or
shade glass is protected against spatter by a clear moisture, and both glasses and shields conform to relevant
protection glass tted in front of it. Shade 11 glass is EN standards.
Accessories
Product number Product name Amperage Filter Shade Quantity in Unit
633230 SHADE 8 GLASS. 5SET < 20 A 8-9 5 sets
633248 SHADE 9 GLASS. 5SET 2040 A 9-10 5 sets
633255 SHADE 10 GLASS. 5SET 4080 A 10 5 sets
633263 SHADE 11 GLASS. 5SET 80175 A 11 5 sets
633271 SHADE 12 GLASS. 5 SET 175300 A 12 5 sets
633289 SHADE 13 GLASS. 5 SET 300500 A 13 5 sets
633214 PROTECTION GLASS. 10PCS 10 pcs
633222 SAFETY GLASS. 10PCS 10 pcs
709493 HEADBAND FOR AUTOVISION+FLIPVISION
709501 SWEAT BAND F/AUTOVISION+FLIPVISION
435
SAFETY HE
HELLME
METTW
WIT
ITH
HFFA
ACE S
SHIE
HIEL
LD A
AND
ND S
SHA
HAD
DE 11
GLASS
196 619114
Features
Safety helmet
Flip up frame
Lightweight design
Adjustable headband
Conforms to relevant standards
Benets
Protects welder from head injury
Protects welder when chipping slag and when grinding
Comfortable to use
Fits all head sizes
Provide safety and long lasting quality
This is the ip vision face shield tted with safety helmet A welder should bear in mind that proper protection is
instead of head band. absolutely necessary to guard himself against the danger of
ultra-violet rays and bits of welding slag in the eye.
A clear safety glass is placed in the xed frame under the
ip-up frame protecting the eyes when chipping slag. The Unitor face shields for welding are made from a lightweight,
ip-up front frame is tted with a lter shade glass with robust plastic material which is unaffected by heat, cold or
shade selected according to welding current used. The lter moisture, and both glasses and shields conform to relevant
shade glass is protected against spatter by a clear EN standards.
protection glass tted in front of it. Shade 11 glass is
supplied as standard with the shield.
Accessories
Product number Product name Amperage Filter Shade Quantity in Unit
633230 SHADE 8 GLASS. 5SET < 20 A 8-9 5 sets
633248 SHADE 9 GLASS. 5SET 2040 A 9-10 5 sets
633255 SHADE 10 GLASS. 5SET 4080 A 10 5 sets
633263 SHADE 11 GLASS. 5SET 80175 A 11 5 sets
633271 SHADE 12 GLASS. 5 SET 175300 A 12 5 sets
633289 SHADE 13 GLASS. 5 SET 300500 A 13 5 sets
633214 PROTECTION GLASS. 10PCS 10 pcs
633222 SAFETY GLASS. 10PCS 10 pcs
436
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Protection
FACE S
SHIE
HIEL
LD W
WIT
ITH
H HA
HAND
NDL
LE A
AND
ND F
FIL
ILT
TER S
SHA
HAD
DE 11
GLASS
196 619098
Hand held face shield for protection of welders eyes and face towards rays, heat and sparks during
welding
Features
Sturdy lightweight design
Conforms to relevant stadards
Benets
Comfortable to use
Provides safety and long lasting quality
A welder should bear in mind that proper protection is moisture, and both glasses and shields conform to relevant
absolutely necessary to guard himself against the danger of EN standards.
electric shocks, burns, ultra-violet rays and bits of welding The face shield with handle is supplied with shade 11 dark
slag in the eye. glass and clear protection glass as standard. It is designed
Unitor face shields for welding are made from a lightweight, to also protect the hand holding it from radiation.
robust plastic material which is unaffected by heat, cold or
Accessories
Product number Product name Amperage Filter Shade Quantity in Unit
633230 SHADE 8 GLASS. 5SET < 20 A 8-9 5 sets
633248 SHADE 9 GLASS. 5SET 2040 A 9-10 5 sets
633255 SHADE 10 GLASS. 5SET 4080 A 10 5 sets
633263 SHADE 11 GLASS. 5SET 80175 A 11 5 sets
633271 SHADE 12 GLASS. 5 SET 175300 A 12 5 sets
633289 SHADE 13 GLASS. 5 SET 300500 A 13 5 sets
633214 PROTECTION GLASS. 10PCS 10 pcs
633222 SAFETY GLASS. 10PCS 10 pcs
437
ARC W
WEELDING G
GLLASSES
The glasses have dimensions 60 x110 mm and are shade 11 glasses which is included. The lter glasses are
manufactured in accordance with DIN standard and are CE supplied in sets consisting of 5 safety glasses, 5 protection
approved. When ordering face shields, lter shade glass of glasses and 5 lter shade glasses.
correct shade should be ordered in addition to the lter
Ordering information
Product number Product name Amperage Filter Shade Quantity in Unit
633230 SHADE 8 GLASS. 5SET < 20 A 8-9 5 sets
633248 SHADE 9 GLASS. 5SET 2040 A 9-10 5 sets
633255 SHADE 10 GLASS. 5SET 4080 A 10 5 sets
633263 SHADE 11 GLASS. 5SET 80175 A 11 5 sets
633271 SHADE 12 GLASS. 5 SET 175300 A 12 5 sets
633289 SHADE 13 GLASS. 5 SET 300500 A 13 5 sets
633214 PROTECTION GLASS. 10PCS 10 pcs
633222 SAFETY GLASS. 10PCS 10 pcs
Approvals
CE
AUTOVIS
ISIO
ION
NOOU
UTSID
IDEEC
COOVER L
LEENS 10P
10PCCS
196 709469
Outside cover lens 10pcs 112 x 93mm for autovision old model.
AUTOVIS
ISIO
ION
N INS
INSID
IDE
ECCO
OVER L
LEENS 10P
10PCCS
196 709477
438
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Protection
PROTECTIV
IVEEC
CLLOTHING
A welder should bear in mind that proper protection is provide good protection during welding, especially when the
absolutely necessary to guard himself against the danger of welder has to work close to the workpiece, or where
electric shocks, burns, ultra-violet rays or bits of welding movement is limited. It is especially important that a welding
slag in the eye. Made from specially treated leather, these jacket is worn when welding in the overhead position, to
protective garments are heat and moisture resistant. They protect the body and arms against falling sparks and slag.
Ordering information
Product number Product name
632786 WELDERS GLOVES. 6 PAIRS
632794 TIG GLOVES. 6 PAIRS
633057 WORKING GLOVES. 12 PAIRS
510438 LEATHER JACKET LARGE
510446 LEATHER JACKET EX LARGE
633016 LEATHER TROUSERS W/BELT
175935 LEATHER CUFFS PAIR
184184 ARM PROTECTOR PAIR
510453 LEATHER SPATS. PAIR
633040 ELECTRODE QUIVER LEATHER MAX 2KG
439
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Protection
WELDING C
CUURTAIN W
WIT
ITH
H HO
HOOOKS
196 633065
The purpose of the welding curtain is to avoid other curtain can be put in a frame, or hooked up on an existing
personnel being harmed by the welding work taking place. pipe or wire. Maximum pipe diameter which the hooks will t
The curtain reduces light emission , but still enables one to on is 41 mm. In order for the curtain to be drawn freely the
see trough the curtain. It is made of self-extinguishing pipe should be less than 30 mm. It is possible to join two or
material. The size of the curtain is 2 m high and 1,3 m wide. more curtains together by the use of snap on buttons along
The top of the curtain has 7 holes and the curtain comes the side. The curtain with hooks is supplied in a plastic bag.
complete with 7 heavy-duty hooks. With the hooks the
WELDING S
SPPATTER B
BLLANK
NKEET 1 X 10MM O
ONNR
ROOLL
196 646067
Non-asbestos woven glass fabric with a re retardent cutting. Available in a roll 1m x 10m. Nom. Thickness
weavelock, for protecting combustible materials and delicate 0,82mm. Max operating temperature 550 C.
machinery from spatter and spark during welding and The welding blanket is supplied in a carton box.
440
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Protection
FUME C
CLLEAN 230 C
COOMP
MPLLETE
196 735878
Features
Compact and lightweight
Connects to 1 phase 230V
High lteration capacity
Automatic start stop function
Benets
Fast and easy transportation
Power points for 230V available
Protects welder against inhalation of harmful welding
fumes
No need for manual operation of start/stop
With this unit a welder is easily protected against inhaling on top of the main lter to remove smell. It is also possible to
welding fumes that might have harmful effects. It is compact add hoses on the exhaust side to completely remove the
and lightweight and can be used anywhere a welder can ltered air from the area if required.
work.
Two powerful motors The two motors guarantee an
Four-stage ltration system adequate extraction capacity under all conditions. At low
When the welding fumes enter the unit they rst pass a welding fume concentrations, the extraction capacity can be
metal pre-separator, then the fumes ow through a halved, in which situation both motors operate at half speed,
aluminium pre-lter and into the main lter which has a total thus providing a lower noise level and reduced maintenance.
area of 12m2. The large area of the main lter provides a Automatic start
long life and a constant high efciency since lter cleaning When the welding cable is placed in a slit on top of the unit
does not have to take place very frequently. The last stage is the automatic start/stop function can be used and the unit
a High Efciency Particle Arrestor HEPA 12 which will automatically switch on when welding starts and off
guarantees a ltration efciency of 99.9% under all when welding stops.
circumstances.
For Accessories and spare parts, please contact Customer
Active carbon lter Services.
If required an optional activated carbon lter can be placed
Ordering information
Product Number Product name
735878 FUMECLEAN-230 WELD. FUME EXTRACTOR
441
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Tools
WIR
IREEB
BRRUSH
Ordering information
Product number Product name Unit
632976 WIRE BRUSH STEEL. 6PCS 6 pcs
632984 WIRE BRUSH STAINL. 6PCS 6 pcs
CHIP
HIPPPING HA
HAMME
MMER
R
Ordering information
Product Number Product name Unit
633008 CHIPPING HAMMER ST. 2PCS pck
632992 CHIPPING HAMMER STAINLESS pcs
442
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Tools
WELDING GGAAUGE T
TYYPE J F
FOOR T
THR
HRO
OAT T
THIC
HICK
KNE
NES
SS
AND R
REEINF
INFOORCEME
MENT
NT
196 516161
MU
MULLTI P
PUURPOSE P
PLLIE
IERRF
FOOR W
WIR
IRE
ETTO
ORCH
193 591990
443
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Tools
WELDERS C
CHA
HAL
LK, F
FLLAT 5X
5X13X
13X12
1277. 144 P
PCCS/P
/PA
ACK
196 632968
TEMP
MPEERATURE IND
INDIC
ICA
ATOR K
KIT
IT
196 633081
GALVANIZ
NIZING
ING S
SPPRAY. 6 P
PCCS
196 633156
444
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Tools
ANT
NTII S
SPPATTER S
SPPRAY, 400 ML IN A B
BOOX, 6 P
PCCS
196 633149
By spraying on a thin layer on each side of where the The anti spatter spray prevents the spatter from the welding
welding is to take place, a barrier is formed preventing the arc from sticking to the metal surface being welded.
molten globules from burning on to the surface. Time consuming chipping and grinding is prevented.
The spatter can easily be wiped off with a brush after
welding.
445
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Tools
MA
MAG
GNA
NAF
FLUX C
CRRACK D
DEETECTIO
IONNK
KIT
IT
096 653535
Magnaux crack detection kit comes in convenient shoulder carry case and consists of 3 pcs cleaner,
2 pcs penetrant, 3 pcs developer and 1pc cloth.
By using dye penetrant we can detect surface cracks not Step 2) Spray penetrant over the area and allow to soak for
readily visible to the eye. The dye penetrant kits consist of a about ten minutes.
cleaner to clean the surface for grease and oil, a dye Step 3) Remove all excess penetrant using a dry cloth and
penetrant that penetrates down in cracks and porosity, and wipe dry.
a developer. It is a low cost and easy to use inspection
method. Step 4) Spray developer evenly over the inspection area and
wait a few minutes until the area dries white. Any surface
Step 1) defects will appear in red contrast.
Remove surface rust, scale, paint by mechanical means,
spray cleaner to degrease the inspection area. Leave to dry.
Ordering information
Product number Product name
653543 CLEANER SKC-S 10 PCS 400ML EACH
653550 PENETRANT SKL-SP1 10 PCS 400ML EACH
653568 DEVELOPER SKD-S2 10 PCS 400ML EACH
446
MA
MARRINE P
PRRODUCTS Arc Welding Equipment
Welder's Tools
CLEANE
NERRS
SKKC-S
-S.. 10 P
PCCS
096 653543
Accessories
for SKC-S, SKL-SP1, SKD-S2
Product Number Product name
653535 MAGNAFLUX CRACK DETECTION KIT 3+2+3
PENE
NETTRANT S
SKKL-S
-SPP1. 10 P
PCCS
096 653550
Spray penetrant over the area and allow to soak for about
10 minutes. Remove all excess penetrant using a dry cloth
and wipe dry.
DEVELOPER S
SKKD-S
-S2.
2. 10 P
PCCS
096 653568
447
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Information about coated stick electrodes
INF
INFOORMA
MAT
TIO
ION
NAAB
BOUT C
COOATED S
STTIC
ICKK
ELECTRODES
General description
The Unitor standard electrode range contains
electrodes for:
A product range selected for maritime use: this can turn into hydrogen cracking also known as cold
High quality coupled with versatility is a basic factor for the cracking in the weld. In order to extend the electrodes
selection of arc welding electrodes in the Unitor standard usable lifetime and safeguard against cold cracking, the
range. It is composed to cover all normally occurring Unitor electrodes for structural work have been given Low
applications onboard, yet to be as compact as possible. Moisture Absorption properties when manufactured. This
Each electrode therefore covers a wide range of greatly reduces the electrodes moisture absorption rate.
applications. This reduces the number of electrode types Electrodes with LMA properties are marked "LMA
needed onboard. electrodes".
Special care has been taken to select electrodes with the The electrode box is made of high density polyethylene
best all-round welding properties. Easily welded electrodes making it the right place for storing and protecting
are necessary to achieve good results without too stringet electrodes from moisture pickup, contamination and
demands on the welder's skill. Welding onboard often physical damage. The information label that is placed on the
requires awkward positions. The Unitor standard range has box gives all relevant information to how the electrodes are
been composed with this in mind, whenever possible the to be used. Label, cap and box are made out of the same
electrodes' welding properties are equally good also in the recycled material and does not need to be separated when
vertical and under-up positions. recycling.
All electrode coatings are hygroscopic (they absorb moisture The label on each box fully identies the contents, and also
from the atmosphere ). When welding the moisture turns into gives basic information on application areas. Complete
hydrogen in the arc that again ends up as hydrogen porosity information on each electrode, with instructions for use and
in the weld deposit. Combined with other undesirable effects
448
application examples are given in the Unitor handbook for
maritime welders
449
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
UNIT
NITO
OR R
RAANG
NGEEO
OFF MA
MAINT
INTE
ENA
NANC
NCEEE
ELLECTRODES
Ordering information
Product
Number Product name Diameter Application onboard
699165 GPO-302N 2.5X350MM 2,5 Unalloyed steel. General applications. Easy to weld, all positions including vertical down.
295 PCS 5,2KG
699173 GPO-302N 3.2X350MM 3,2 Unalloyed steel. General applications. Easy to weld, all positions including vertical down.
190 PCS 5.4 KG
699181 GPO-302N 4.0X350MM 4,0 Unalloyed steel. General applications. Easy to weld, all positions including vertical down.
120 PCS 5.2 KG
699231 GPR-300H 3.2X450MM 85 3,2 Unalloyed steel. Large welds in at position.
PCS 5.8 KG
699249 GPR-300H 4.0X450MM 51 4,0 Unalloyed steel. Large welds in at position.
PCS 5.5 KG
699256 GPR-300H 5.0X450MM 35 5,0 Unalloyed steel. Large welds in at position.
PCS 5.6 KG
699260 GPR-300H 6.0X450MM 23 6,0 Unalloyed steel. Large welds in at position.
PCS 5.3KG
699199 SPECIAL-303N 2,0 Unalloyed & Low alloyed Steel. Thin plate material. General applications. Double coated electrode,
2.0X350MM 115PCS easy to weld.
1,7KG
699207 SPECIAL-303N 2,5 Unalloyed & Low alloyed Steel. Thin plate material. General applications. Double coated electrode,
2.5X350MM 220PCS easy to weld.
4,1KG
699215 SPECIAL-303N 3,2 Unalloyed & Low alloyed Steel. Thin plate material. General applications. Double coated electrode,
3.2X350MM 120PCS easy to weld.
4,1KG
699223 SPECIAL-303N 4,0 Unalloyed & Low alloyed Steel. Thin plate material. General applications. Double coated electrode,
4.0X450MM 75 PCS 5,2KG easy to weld.
699264 LH-314N BOX 2.5X350MM 2,5 Unalloyed & Low alloyed Steel. General applications.
699272 LH-314N 3.2X450MM96 3,2 Unalloyed & Low alloyed Steel. General applications.
PCS 5KG
699280 LH-314N 4.0X450MM 78 4,0 Unalloyed & Low alloyed Steel. General applications.
PCS 5.6 KG
699298 LHH-314H 4.0X450MM 54 4,0 Unalloyed & Low alloyed Steel. Large welds in at position
PCS 5.5 KG
699306 LHH-314H 5.0X450MM 36 5,0 Unalloyed & Low alloyed Steel. Large welds in at position
PCS 5.5 KG
699314 LHV-316N 3.2X350MM 3,2 Unalloyed & Low alloyed Steel. Specially suitable for vertical down welding.
137 PCS 4.8 KG
699322 LHV-316N 4.0X350MM 99 4,0 Unalloyed & Low alloyed Steel. Specially suitable for vertical down welding
PCS 5.0 KG
699330 LHT-318N 2.5X350MM 75 2,5 High temp. steel Boiler plates and pipes up to 550 dgr.C. Up tp 1% Cr, 0,5% Mo.
PCS 1.7 KG
450
Product
Number Product name Diameter Application onboard
699348 LHT-318N 3.2X350MM 48 3,2 High temp. steel Boiler plates and pipes up to 550 dgr.C. Up tp 1% Cr, 0,5% Mo.
PCS 1.7 KG
683631 LHL-319N 2.5X350MM 78 2,5 Low temp.steel Ice Class hull plates. Up to 2,7%Ni
PCS 1.8 KG
683649 LHL-319N 3.2X350MM 48 3,2 Low temp.steel Ice Class hull plates. Up to 2,7%Ni
PCS 1.8 KG
683656 LHR-320 N 2.5X350MM 882,5 Weather resistant steel Corrosion resistant to sea-water and ue gases.
PCS 1.7 KG
699389 LHR-320N 3.2X350MM 48 3,2 Weather resistant steel Corrosion resistant to sea-water and ue gases.
PCS 1.8 KG
699397 18/8-321N 1.6X300MM 1,6 Stainless steel AISI 304/316 L. Tanks, piping, pumps and valves.
213 PCS 1,7 KG
699405 18/8-321N 2.5X300MM 2,5 Stainless steel AISI 304/316 L. Tanks, piping, pumps and valves.
89 PCS 1.7 KG
699413 18/8-321N 3.2X300MM 3,2 Stainless steel AISI 304/316 L. Tanks, piping, pumps and valves.
54 PCS 1.7 KG
699421 23/14-322N 2.5X300MM 2,5 Stainless steel AISI 309. Joining stainless to steel. Compound steel. Stainless steel overlays.
84 PCS 1.7 KG
699439 23/14-322N 3.2X350MM 3,2 Stainless steel AISI 309. Joining stainless to steel. Compound steel. Stainless steel overlays.
50 PCS 2.0 KG
699447 23/14-322N 4.0X350MM 4,0 Stainless steel AISI 309. Joining stainless to steel. Compound steel. Stainless steel overlays.
699454 DUPLEX-325N 2.5X300MM 2,5 Duplex steel. Joining of duplex to stainless and steel.
91 PCS 1.7 KG
699462 DUPLEX-325N 3.2X350MM 3,2 Duplex steel. Joining of duplex to stainless and steel.
55 PCS 2.0 KG
699470 TENSILE-328N 2,5 Difcult to weld steel Spring steel, vanadium steel, tool steel, high carbon steel.
2.5X300MM 79PCS 1.6 KG
699488 TENSILE-328N 3,2 Difcult to weld steel Spring steel, vanadium steel, tool steel, high carbon steel
3.2X350MM 50PCS 2.0 KG
699512 NIFE-334N 3.2X350MM 68 3,2 Cast Iron. High strength. Many layers. Joining cast iron to steel.
PCS 2.2 KG
699520 NIFE-334N 4.0X350MM 4,0 Cast Iron. High strength. Many layers. Joining cast iron to steel.
699496 NICKEL-333N 2.5X300MM 2,5 Oily cast iron. Tolerant to high Carbon content.
121PCS 2.0 KG
699504 NICKEL-333N 3.2X350 68 3,2 Oily cast iron. Tolerant to high Carbon content.
PCS 2.2 KG
606458 TINBRO-341 3.2 X 350 MM3,2 Copper alloys Bronze and brass. Joining copper alloys to steel.
42PCS 1.4KG
606457 ALBRONZE-344 3.2X350 3,2 Bronze an brass. Joining copper alloys to steel.
MM
699538 ALUMIN-351N 3.2X350MM 3,2 Aluminium Rolled, deawn and castings.
82 PCS 1.1 KG
606454 WEARMAX-327 2.5 X 2,5 Hard surfacing. Wear resistant overlays. Winchwheel pockets, cable drums.
350MM 49PCS 1,6KG
606455 WEARMAX-327 3.2 X 3,2 Hard surfacing. Wear resistant overlays. Winchwheel pockets, cable drums.
350MM 68PCS 3,5KG
606456 WEARMAX-327 4.0 X 4,0 Hard surfacing. Wear resistant overlays. Winchwheel pockets, cable drums.
350MM 42PCS 3,4KG
725275 ABRATECH-330 3,2 Hard surfacing, wear resistant overlay against gauging abrasion, pressure and impact. Application
3.2X350MM 68 PCS 3,5KG include welding work onboard dredgers and cement carriers.
451
Product
Number Product name Diameter Application onboard
606460 IMPACT-329S 3.2 X 3,2 Hard surfacing. High temp. Wear resistant overlays. Exhaust valves.
350MM 39PCS 1.4KG
606461 IMPACT-329S 4.0 X 4,0 Hard surfacing. High temp. Wear resistant overlays. Exhaust valves.
350MM
606459 CH2-382 3.2 X 350MM 36 3,2 Chamfering/Gauging Using standard equipment.
PCS 1.4 KG
758474 ACA-384 6.3X305MM 50 6,3 Chamfering/Gauging. Air carbon arc gouging. Gouging and weld removal using compressed air.
PCS 0.8 KG
758466 ACA-384 8.0X305MM 50 8,0 Chamfering/Gauging. Air carbon arc gouging. Gouging and weld removal using compressed air.
PCS 1.3 KG
758458 ACA-384 15X5X305MM 50 15x5 Chamfering/Gauging. Air carbon arc gouging. Gouging and weld removal using compressed air.
PCS 2.1 KG
452
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
GPO-30
302N
2N
Features
Unitor high density polyethylene packing
Strikes and restricts easily
All positions including vertical down
Superb arc stability
Bridge large gaps
Approved by classication societies for mild steels
Benets
Can be stored for long time
Superb for tack welding
No need to use additional special electrode
Easy to use
Can do the job even if edge preparation is not up to standard
In compliance with maritime rules and regulations
General purpose organic-rutile coated electrodes for vertical down. Suitable for bridging large gaps.
unalloyed steels. Easily weldable in all positions including Excellent for all-purpose repair welding of mild steel.
Ordering information
Product Number Product name Welding current range Polarity Weight
699165 GPO-302N 2.5X350MM 295 PCS 5,2KG 60-100 A AC, DC+/- 5.2 kg
699173 GPO-302N 3.2X350MM 190 PCS 5.4 KG 80-150 A AC, DC+/- 5.4 kg
699181 GPO-302N 4.0X350MM 120 PCS 5.2 KG 100-200 A AC, DC+/- 5.2 kg
453
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
GPR-300H
Features
Unitor high density polyethylene packing
High deposition rate
Can be rested in the joint during welding
Approved by classication societies for mild steels
Benets
Can be stored for long time without moisture pick up
Greatly improves on the time to do the job
Makes the welding easy to perform
In compliance with maritime rules and regulations
High recovery rutile type electrodes for unalloyed steels. layer. Self-releasing slag. Also suited for steels protected
Easy to use in the horizontal position with a speed of up to with zinc- or iron-oxide based primers.
50 cm/min., and a throat thickness up to 3.5 - 6 mm in one
Ordering information
Product Number Product name Welding current range Polarity Weight
699231 GPR-300H 3.2X450MM 85 PCS 5.8 KG 130-170 A AC, DC+/- 5.8 kg
699249 GPR-300H 4.0X450MM 51 PCS 5.5 KG 180-230 A AC, DC+/- 5.5 kg
699256 GPR-300H 5.0X450MM 35 PCS 5.6 KG 250-340 A AC, DC+/- 5.6 kg
699260 GPR-300H 6.0X450MM 23 PCS 5.3KG 300-430 A AC, DC+/- 5.3 kg
454
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
SPECIA
IALL-30
303N
3N
Features
LMA electrode
Unitor high density polyethylene packing
Double coated electrode
Approved by classication societies for higher tensile
steels
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
Easy to use
In compliance with maritime rules and regulations
Low hydrogen double coated electrode for welding of electrode is specially suited for thin plate welding. LMA
unalloyed and low alloyed ship quality steel. The 2 mm electrode
Ordering information
Product Number Product name Welding current range Polarity Weight
699199 SPECIAL-303N 2.0X350MM 115PCS 1,7KG 40-80 A AC, DC + 1.7 kg
699207 SPECIAL-303N 2.5X350MM 220PCS 4,1KG 50-90 A AC, DC + 4.1 kg
699215 SPECIAL-303N 3.2X350MM 120PCS 4,1KG 90-150 A AC, DC + 4.1 kg
699223 SPECIAL-303N 4.0X450MM 75 PCS 5,2KG 120-190 A AC, DC + 5.2 kg
455
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
LH-
H-314N
314N
Features
LMA electrode
Unitor high density polyethylene packing
Approved by classication societies for higher tensile
steels
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
In compliance with maritime rules and regulations
A reliable basic all-around electrode for unalloyed and low resistance against impact and cracking. Easily removable
alloyed ship quality steels, high deposition rate, deposit with slag, good building properties. LMA electrode
high
Ordering information
Product Number Product name Welding current range Polarity Weight
699264 LH-314N BOX 2.5X350MM 45-105 A DC + 4.0 kg
699272 LH-314N 3.2X450MM96 PCS 5KG 95-155 A DC + 5.0 kg
699280 LH-314N 4.0X450MM 78 PCS 5.6 KG 125-210 A DC + 5.6 kg
456
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
LHH-
HH-314H
314H
Features
LMA electrode
Unitor high density polyethylene packing
High deposition rate
Can be rested in the joint during welding
Approved by classication societies for higher tensile
steels
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
Greatly improve on the time to do the job
Makes the welding easy to perform
In compliance with maritime rules and regulations
Ordering information
Product Number Product name Welding current range Polarity Weight
699298 LHH-314H 4.0X450MM 54 PCS 5.5 KG 170-240 A DC + 5.5 kg
699306 LHH-314H 5.0X450MM 36 PCS 5.5 KG 225-355 A DC + 5.5 kg
457
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
LHV
HV--316N
Features
LMA electrode
Unitor high density polyethylene packing
Vertical down welding
Can be rested in the joint during welding
Approved by classication societies for higher tensile
steels
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
Greatly improve on the time to do the job
Makes the welding easy to perform
In compliance with maritime rules and regulations
Low hydrogen heavily coated basic electrode for unalloyed down welding in addition to other positions. Practically self-
and low alloyed ship quality steels, especially suited for releasing slag, high deposition rate. LMA electrode
vertical
Ordering information
Product Number Product name Welding current range Polarity Weight
699314 LHV-316N 3.2X350MM 137 PCS 4.8 KG 110-150 A DC+ 4.8 kg
699322 LHV-316N 4.0X350MM 99 PCS 5.0 KG 180-220 A DC+ 4.0 kg
458
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
LHT
HT--318N
Features
LMA electrode
Unitor high density polyethylene packing
Approved by classication societies for boiler tubes
and boiler plates with 1%Cr, 1/2% Mo and temp. up
to 550C
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
In compliance with maritime rules and regulations
Low hydrogen basic coated electrode for heat resistant low Used on boiler plates and pipes for working temperatures up
alloy steels with up to 1% Chromium an 0.5% Molybdenum. to 550C. LMA electrode
Ordering information
Product Number Product name Welding current range Polarity Weight
699330 LHT-318N 2.5X350MM 75 PCS 1.7 KG 70-105 A DC +/- 1.7 kg
699348 LHT-318N 3.2X350MM 48 PCS 1.7 KG 95-150 A DC +/- 1.7 kg
459
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
LHL
HL--319N
Features
LMA electrode
Unitor high density polyethylene packing
Approved by classication societies for low
temperature ice class hull plates with up to 2,6% Ni
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
Can be used safely
Low hydrogen basic coated electrode for low temperature AC cargo. Ice class hull plates. Exellent impact toughness at
steel with 2,7% Ni. Plates and pipes used for low -80C. LMA electrode
temperature
Ordering information
Product Number Product name Welding current range Polarity Weight
683631 LHL-319N 2.5X350MM 78 PCS 1.8 KG 70-110 A AC, DC + 1.8 kg
683649 LHL-319N 3.2X350MM 48 PCS 1.8 KG 105-150 A AC, DC + 1.8 kg
460
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
LHR
HR--320N
Features
LMA electrode
Unitor high density polyethylene packing
Approved by classication societies for weathering
steels like Cor-Ten A and Patinax steel
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
Can be used safely
Low hydrogen basic coated electrode for welding of protective paint coating wears off (hull plating on ice
weathering steel. Good corrosion resistance to sea water breakers). LMA electrode
and ue gases. Especially suitable for steels where
Ordering information
Product Number Product Name Welding current range Polarity Weight
683656 LHR-320N 2.5 X 350MM 80-115 A AC,DC + 1.7 kg
699389 LHR-320N 3.2 X 350MM 100-150 A AC,DC + 1.8 kg
461
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
18/8-
18/8-321N
321N
Features
LMA electrode
Unitor high density polyethylene packing
Approved by classication societies for welding of
stainless steel
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
In compliance with maritime rules and regulations
Rutile-basic electrodes for welding corrosion-resistant Nickel and 2-3% Molybdenum, e.g. AISI:316/316L, TP-316/
austenitic steels containing 16-18% Chromium, 10-14% H, CF-3M/8M/8C, CPF 8M/10 MC. LMA electrode
Ordering information
Product Number Product name Welding current range Polarity Weight
699397 18/8-321N 1.6X300MM 213 PCS 1,7 KG 35-45 A AC,DC + 1.7 kg
699405 18/8-321N 2.5X300MM 89 PCS 1.7 KG 45-90 A AC,DC + 1.7 kg
699413 18/8-321N 3.2X300MM 54 PCS 1.7 KG 60-135 A AC,DC + 1.7 kg
462
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
23
23/14-
/14-322N
322N
Features
LMA electrode
Unitor high density polyethylene packing
Approved by classication societies for welding of
stainless steel to steel and compound steel
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
In compliance with maritime rules and regulations
Rutile-basic electrode for welding corrosion-resistant steels heat resistant steel with 19-21% Chromium and 11-13%
among themselves and to mild steels, for clad CrNiMo steels nickel. LMA electrode
and for corrosion resistant layers on mild steels. Also for
Ordering information
Product Number Product name Welding current range Polarity Weight
699421 23/14-322N 2.5X300MM 84 PCS 1.7 KG 50-90 A AC,DC+ 1.7 kg
699439 23/14-322N 3.2X350MM 50 PCS 2.0 KG 90-120 A AC,DC+ 2.0 kg
699447 23/14-322N 4.0X350MM 85-180 A AC,DC+ 2.0 kg
463
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
DUPLEX-325N
Features
LMA electrode
Unitor high density polyethylene packing
Approved by classication societies for welding of
duplex steel
Benets
Electrodes can be exposed longer in the open
Can be stored for long time without moisture pick up
In compliance with maritime rules and regulations
Rutile basic type electrode for welding of duplex stainless steel to mild steel. High resistance to general
stainless steel used in tanks, cargo loading pipes, heating corrosion and pitting corrosion. Applicable up to a service
coils and as ladder materials on board. Also for joining temperature of 250C. LMA electrode
duplex steel to mild steel, duplex steel to stainless steel and
Ordering information
Product Number Product name Welding current range Polarity Weight
699454 DUPLEX-325N 2.5X300MM 91 PCS 1.7 KG 50-90 A AC,DC + 1.7 kg
699462 DUPLEX-325N 3.2X350MM 55 PCS 2.0 KG 80-120 A AC,DC + 2.0 kg
464
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
PIC
ICKKLING G
GEEL 2 L
LIT
ITR
RE F
FOOR S
STTAINL
INLEESS S
STTEEL
095 661778
Features
HD polyethylene container together with brush
In gel state
Benets
Safe handling and ready to use
Product will stick in vertical and overhead positions
465
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
TENS
NSIL
ILE
E-328N
Features
Unitor high density polyethylene packing
Superb arc stability
Easy slag removal and smooth weld surface
High strength
Benets
Can be stored for long time without moisture pick up
Easy to use
Little surface treatment needed
Less possibility for joint failure during operation
Electrodes for most high-alloy steels like spring-steels, cracking, heat and corrosion. Extremely hard wearing,
carbon steels, tool steels etc. High resistance against polishes to high gloss with low friction.
Ordering information
Product Number Product name Welding current range Polarity Weight
699470 TENSILE-328N 2.5X300MM 79PCS 1.6 KG 50-85 A AC,DC+ 1.6 kg
699488 TENSILE-328N 3.2X350MM 50PCS 2.0 KG 80-125 A AC,DC+ 2.0 kg
466
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
IMP
IMPA
ACT-329S
Features
Unitor high density polyethylene packing
Superb arc stability
Easy slag removal and smooth weld surface
High resistance to high temperature wear
Benets
Can be stored for long time without moisture pick up
Easy to use
Little surface treatment needed
Deposit will last longer resulting in less need for
rewelding
Special cobalt alloy electrodes for building up exhaustvalve non-porous, machineable welds highly resistant to impact,
spindles in combustion engines, producing homogenous, heat and corrosion.
Ordering information
Product Number Product Name Welding current range Polarity Weight
606460 IMPACT-329S 3.2 X 350MM 70-120 A AC,DC+ 1.4 kg
606461 IMPACT-329S 4.0 X 350MM 90-150 A AC,DC+ 1.4 kg
467
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
WEARMA
MAXX-32
3277
Features
Unitor high density polyethylene packing
Superb arc stability
Easy slag removal and smooth weld surface
High resistance to wear
Benets
Can be stored for long time without moisture pick up
Easy to use
Little surface treatment needed
Deposit will last longer resulting in less need for
rewelding
Ordering information
Product Number Product name Welding current range Polarity Weight
606454 WEARMAX-327 2.5 X 350MM 49PCS 1,6KG 75-140 A AC,DC+ 1.6
606455 WEARMAX-327 3.2 X 350MM 68PCS 3,5KG 90-170 A AC,DC+ 3.5 kg
606456 WEARMAX-327 4.0 X 350MM 42PCS 3,4KG 120-240 A AC,DC+ 3.4 kg
468
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
ABRATECH-
H-330
330
Features
Unitor high density polyethylene packing
Superb arc stability
Easy slag removal and smooth weld surface
High resistance to abrasive wear
Benets
Can be stored for long time without moisture pick up
Easy to use
Little surface treatment needed
Deposit will last longer resulting in less need for
rewelding
Ordering information
Product Number Product name Welding current range Polarity Weight
725275 ABRATECH-330 3.2X350MM 68 PCS 3,5KG 100-150 A AC,DC+ 3.5 kg
469
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
NIC
NICKKEL-333N
Features
Unitor high density polyethylene packing
Superb arc stability
Easy slag removal and smooth weld surface
Very good on oily cast iron
Benets
Can be stored for long time without moisture pick up
Easy to use
Little surface treatment needed
Less porosity in deposit resulting in less required
grinding
Nickel electrodes (98% Ni) for welding of gray cast iron corroded cast iron, and also for joining cast iron to steel,
to itself or to steel. Especially good for old oil-soaked and copper, copper alloys and stainless steel.
Ordering information
Product Number Product name Welding current range Polarity Weight
699496 NICKEL-333N 2.5X300MM 121PCS 2.0 KG 55-110 A AC,DC +/- 2.0 kg
699504 NICKEL-333N 3.2X350 68 PCS 2.2 KG 80-140 A AC,DC +/- 2.2 kg
470
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
NIF
NIFEE-334N
Features
Unitor high density polyethylene packing
Superb arc stability
Easy slag removal and smooth weld surface
High strength
Benets
Can be stored for long time without moisture pick up
Easy to use
Little surface treatment needed
Less possibility for joint failure during operation
Ordering information
Product Number Product name Welding current range Polarity Weight
699512 NIFE-334N 3.2X350MM 68 PCS 2.2 KG 75-100 A AC,DC+/- 2.2 kg
699520 NIFE-334N 4.0X350MM 85-160 A AC,DC+/- 2.4 kg
471
TINB
INBRRO-34
3411 3.
3.2X
2X3
350MM 42 E
ELLECTRODES 1.
1.4K
4KG
G
096 606458
Features
Unitor high density polyethylene packing
Superb arc stability
Easy slag removal and smooth weld surface
Suitable for most copper alloys
Benets
Can be stored for long time without moisture pick up
Easy to use
Little surface treatment needed
Right rst time
Weight 1.4 kg Electrodes for welding bronze, copper or brass to itself and
to steel, cast iron and nickel alloys. Also for building up
Diameter 3.2 mm
parts, or lling cavities.
Ampere 70-90 A
Polarity DC+
ALBRONZ
NZEE-344 3.
3.2X
2X3
350MM 46 E
ELLECTRODES 1.
1.3K
3KG
G
096 606457
Features
Unitor high density polyethylene packing
Superb arc stability
Easy slag removal and smooth weld surface
High strength and resistance against cavitations and
sea water corrosion
Benets
Long storage lifespan without moisture pick up
Easy to use
Little surface treatment needed
Right rst time
Weight 1.3 kg
Diameter 3.2 mm
Amperage 80-160 A
Polarity AC,DC+
472
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
ALUMIN-
MIN-3351N 3.
3.2X
2X3
350MM 82 E
ELLECTRODES 1.
1.1K
1KG
G
096 699538
Features
Unitor high density polyethylene packing in
combination with vacuum packing
Good arc stability
High strength
Benets
Long storage lifespan without moisture pick up
Easy to use
Less possibility for joint failure during operation
Technical data
Weight 1.0 kg
Diameter 3.2 mm
Amperage 70-110 A
Polarity DC+
473
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
CH2-
H2-382
382 3.
3.2X
2X3
350MM 36 E
ELLECTRODES 1.
1.4K
4KG
G
096 606459
Features
Unitor high density polyethylene packing
Suitable for all metallic materials.
Stable arc
Can be used with standard equipment without use of
compressed air
Benets
Long storage lifespan without moisture pick up
No need to worry about chemistry of base material
Easy to use
No need to invest in special equipment
Technical data
Weight 1.4 kg
Diameter 3.2 mm
Amperage 160-280 A
Polarity AC,DC +/-
474
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Coated Stick Electrodes
ACA-384
Features
Suitable for all metallic materials
High capacity removal of metal
Stable arc
Benets
No need to worry about chemistry of base material
Cuts down time it takes to do the job
Easy to use
Ordering information
Product Number Product Name Welding current range Polarity Weight
758474 ACA-384 6.3 x 305mm 200-350 A DC+ 0.8 kg
758466 ACA-384 8.0 x 305mm 200-450 A DC+ 1.3 kg
758458 ACA-384 15X5 x 305mm 400-600 A DC+ 2.1 kg
475
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Electrode Storing Cabinets
MINID
MINIDRRYER- 3
350
50 C
CAAPACIT
ITYY 8K
8KG
GEEL
LECTRODES
094 637827
Features
Connects to 230V 1 phase
Compact and lightweight
Adjustable temperature up to 350C
Benets
Sockets for 230V easily available
Transports quickly and easily
Avoid cracking of welds due to high hydrogen level in
electrode coating
Restores the electrodes to their original state thereby
saving the investment
Technical data cable and plug. It has a thermostat for continuous selection
of the temperature from 100 to 350C (212F to 662F). The
Electrode capacity 8 kg dryer is very robust in design and is insulated all-over with 40
Dimensions 170D x 170W x 570H mm mm mineral wool. It can also stand permanently in a tilted
Net weight 7kg position. When the dryer is in a tilted position, the cover
cannot stand open, but always closes to prevent the
Heating element 230 V, 50/60 Hz, 1 phase, 400W
intrusion of unwanted moist air. When the dryer is tilted, a
Thermostat control 100C to 350C rim around the opening prevents rainwater from entering.
Caution:
The Minidryer-350 is designed to restore moist electrodes,
or to pre-dry electrodes before welding when this is required. Use gloves when handling warm electrodes from inside the
The dryer may be used with electrodes of both 350 and 450 Minidryer- 350. No chemical products are to be used in the
mm length. With the cover in an open position, the dryer. This product should be used for drying electrodes
electrodes will protrude approximately 40mm and are easily only.
accessible. The Minidryer-350 is equipped with 2 m primary
Accessories
Product Number Product Name
637835 Heating element
637843 Thermostat w.reg.knot
476
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Electrode Storing Cabinets
HE
HEAATING C
CAABINE
INETT - 85 C
CAAPACIT
ITYY3
350K
50KG
G
ELECTRODES
094 637850
Storing of electrodes
Features
Connects to 230V 1 phase
Adjustable temperature from 30-85 C
Slanted shelves
Electric active parts enclosed in bottom
Benets
Power points for 230V easily available
Keeping electrodes at proper temperature during
storing thereby saving the investment
Prevents content from sliding out during rough seas
Safe in operation
Technical data (86 F up to 185 F). The cabinet contains ve shelves and
every shelf is removable. The shelves are slanted to prevent
Electrode capacity 350kg the content from sliding out when the door is opened in
Dimensions 1095H x 564W x 640D mm rough seas. The active parts in this oven are enclosed in a
Net weight 70kg cassett located in the bottom of the oven. This unit can be
easily removed as one unit. The heating cabinet - 85 have
Heating element 230 V, 50/60 Hz, 1 phase, 500 W
100mm mineral wool in the bottoom and 50mm in the top
Thermostat control 3085 C and side walls. The oven has a simple yet rugged
construction, and can be transported with a fork lift truck.
This cabinet is specially designed as a ship's store for repair Caution: Use gloves when handling warm electrodes from
and maintenance electrodes. A thermostat allows for inside the heating cabinet. No chemical products are to be
stepless setting of the temperature from 30 C up to 85 C used within the heating cabinet.
Accessories
Product Number Product Name
777853 Cassette w/heating element thermostat w/reg knot
637876 Heating element
637884 Thermostat w/reg knot
477
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Electrode Storing Cabinets
ELECTRODE C
CAABINE
INETTE
EMP
MPT
TY F
FOOR 2
277P
PCCS
ELECTRODE P
PA
ACKAGES
094 669994
Features
Compact design
Sturdy and corrosion resistant
Large storing capacity
Benets
Easy overview and access to content
Long lasting with no maintenance
Opportunity to customise content to the ship's need
Technical data Electrode cabinet empty with room for 27 electrode boxes
and the unitor handbook for maritime welders.
Dimensions 600H x 600W x 300D mm
NB! Necessary free distance above cabinet 310mm.
Weight 37,5 kg
478
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Electrode Storing Cabinets
ELECTRODE CCA
ABINE
INET
TCCO
OMP
MPL
LETE W
WIT
ITH
H227
7PPC
CKS
OF E
ELLECTRODES
094 670000
Features
Compact design
Sturdy and corrosion resistant
Broad range of electrodes and sizes
Benets
Easy overview and access to content
Long lasting with no maintenance
Able to provide electrodes for all normal repair
applications onboard
479
Ordering information
Cabinet supplied with:
480
MA
MARRINE P
PRRODUCTS Arc Welding Consumables and Storing
Arc Welding Wires
WIR
IREEF
FOOR W
WIR
IRE
EWWE
ELDING
In wire welding an arc is struck between a continuosly fed supplied on 200mm diameter spools, 51 mm width, shaft
wire and the workpiece. An inert gas, active gas or a mixture diameter 50 mm. The spools are packed in individually
of the two protects the pool from the surrounding air. The sealed plastic bags and cardboard cartons and labelled with
wire used can be solid or ux cored. In some cases the ux information fully identifying the wire with technical data and
cored wire is self shielded and does not require any classications. The labels also provide basic information on
additional shielding gas. use.
Unitor standard range of welding wires for gas metal arc
welding (GMAW) and ux cored arc welding (FCAW) is
Ordering information
Product
Number Product name Description
590117 GPS-W 200 0,8MM WELD. WIRE Solid wire for gas metal arc welding of structual steels
5,0KG
160100 MS-W-201 SELFSHIELDWIRE General purpose Self-Shielded wire for welding of mild steel and ships steel. All position welding,
0,8MM 4.5KG including vertical down
597518 S316M-GF,221,0.9MM WELD. Flux cored wire for stainless steel: AISI 304 and 316 L
WIRE 2.5KG
606041 S-309M GF-222 1.0MM WELD. Flux cored wire for welding of stainless steel and welding mild steel to stainless steel. Also welding
WIRE2.5KG of clad steel.
590109 ICUNI-W 239 0,8MM 2,0 KG Solid wire for welding copper- nickel alloys (cunifer) in wrought or cast form, containing up to 30%
Nickel.
777972 IALBRO-W 237 0,8MM WELD. WIRESolid wire for welding bronze/brass alloys including aluminium bronzes like yorkalbro.
5,0KG
590083 ALUMAG-W 235 1,0MM 2,0KG Solid wire for welding of all common wrought and cast aluminium alloys e.g. AlMg, AlMgMn,
AlMgSi and AiMg (Cu).
230230 ABRATECH-W-230 1,6MM 15KG Self-Shielded ux cored wire for hard surfacing
SPOOL
481
RODS A
AND
ND F
FLLUXES F
FOOR T
TIG
IG W
WEELDING
In tungsten insert gas welding (TIG), an arc is struck Unitor rods for TIG welding are supplied in sealed plastic
between a tungsten electrode and the workpiece. An inert containers. All rods are supplied in 500 mm lengths for
gas ow (argon) protects the electrode and pool from the convenient use. The label on each container fully identies
surrounding air. The electrodes do not melt. The ller metal is the contents, and also gives rod data and basic information
inserted into the molten pool in the form of a seperate rod. on application areas and use.
The process has a similar welding technique as gas welding
but uses electricity as the energy source.
Ordering information
Product Product
Number name Description
Welding rods
604850 IMS-210 2.0 Unitor IMS is a welding rod for unalloyed and low alloyed steels. 2 .0 mm Rods with diameter are most used for TIG
X 500 MM welding.
1,5KG
305532 ICROMO-216 lcromo is a chromium-molybdenum alloyed welding rod for heat resistant steels types 10 Cr Mo-910 and 13 Mo-44 found
2.5 X 500 in boiler tubes and other heat resistant components. Gas or tensile strength 560 Mpa.
MM 1,0KG
602979 18/8MO-221 18/8 Mo is a wire for welding stainless and acid resistant steel. The silisium content of the wire ensures smooth transfer
2.0 X 500 and good prole of the bead. Application areas are similar to the coated electrode 18/8-321 N in 1.7 mm, but with the
MM 0,5KG advantages TIG can offer. When welding very thin sheets and pipes (less than 2mm) it is always an advantage to use the
TIG process. This is also an advantage for the root bead when welding thicker sheets with prepared V-grooves.
725309 IDUPLEX-222 Iduplex-222 is a TIG rod for welding Duplex stainless steel, Duplex to Mild steel and Duplex to Stainless steel. The deposit
2.0 X 500 offers elevated mechanical strength and toughness resistance to stress corrosion cracking. It is an advantage to use TIG
MM 0,5KG welding in thin sheets and pipe walls. Can also be used for welding the root run in thick wall piping where the rest of the
groove is lled up using the duplex electrode Duplex-325 N.
335547 ICUNI-30 A welding rod for TIG welding of copper nickel alloys, for example Cunifer pipes. No ux is used in this process. Typical
239 2.5 X applications are welding anges on pipes, pipe joints, patching leaking pipes etc. Joint surfaces and adjacent areas must
500 MM be thoroughly cleaned before welding. Small diameter Cunifer pipes can be joined by means of overlap joints (capillary
2,0KG action) using AG-60 silver solder combined with AG-60 Flux.
519736 IALBRO-237 IALBRO is a ux-coated ller rod for TIG welding of aluminium- brass pipes (Yorcalbro). This type of alloy is widely used in
MF 2.4 X seawater resistant piping. In TIG welding of joints it is strongly recommended that I-Flux 238 be applied to both sides of the
500MM joint on the inside. Yorcalbro pipes with a diameter less than 4 which can be joined by means of an overlap joint (capillary
1,4KG action) may be silver brazed using AG-60 combined with Albro Flux.
Flux
603092 I-FLUX Unitor ux is supplied in paste form for use with the TIG rod Ialbro-237 MF for welding of Yorcalbro. The ux is
238PF. 250G complementary to the ux found in the serrations of the lalbro TIG rod. While the ux on the rod is sufcient for the actual
welding zone, it is strongly recommended to use additional IFLUX on both sides of the joint, especially on the inside of e.g.
pipes. This will improve bonding and penetration. Flux residues must be washed off with water after welding. IFLUX is
supplied in 250 gram tins.
482
COLD R
REEPAIR P
POOLYME
MERRC
COOMP
MPOOUND
NDSS
Unitor metalgrade and ceramigrade products are a range of resistance and are suitable for permanent immersion in
cold curing metal repair and rebuilding materials based on many environments including seawater, hydrocarbons, oils
the latest polymer resin technology which is the result of and a very wide range of chemical solutions. The basic
many years of development. Unitor rubbergrade products range of products is selected in order to provide a versatile
are cold-vulcanising elastomeric repair materials for use on program for onboard applications. The application areas
rubber as well as metal components. The products are complement and extend the various welding and related
compatible with all ferrous and non-ferrous metals as well as thermal processes already in use, providing an even more
most plastics, and have in many cases proven themselves complete repair system than previously.
as permanent repairs. They have excellent chemical
Ordering information
Product Product
Number name Description
659300 POLYMER KIT- Complete basic cold curing polymer kit for emergency repairs.
ALFA
630384 LEAK-STOP A special bandage impregnated with a resin system which is activated by immersion in water. Ideal for repairs to leaking
PIPE REPAIR I pipes, simply immerse in water then wrap around the leak. The Metalgrade Ready Stick be used to plug the actual hole
before putting on the tape.
606006 LEAK-STOP A special bandage impregnated with a resin system which is activated by immersion in water. Ideal for repairs to leaking
PIPE REPAIR II pipes, simply immerse in water then wrap around the leak. The Metalgrade Ready Stick be used to plug the actual hole
before putting on the tape.
630392 LEAK-STOP A special bandage impregnated with a resin system which is activated by immersion in water. Ideal for repairs to leaking
PIPE REPAIR III pipes, simply immerse in water then wrap around the leak. The Metalgrade Ready Stick can be used to plug the actual hole
before putting on the tape.
659227 METALGRADE Base and activator in two separate sticks. Cut off the needed length and knead the two parts together until streak free. Use
READY-STICK for sealing of leaks in pipes, tanks, ducts etc. Can be used together with Leak Stop to plug the hole before wrapping the
tape. Set of 3 pairs of sticks giving: 0,72 kg Repair Compound
659235 METALGRADE A two component extremely fast cold-curing metal repair compound supplied in Base and Activator containers. Used
EXPRESS wherever there is an emergency and urgent need to get equipment back into action. Base & Activator giving: 0,25 l Rapid
Repair Compound.
659243 METALGRADE A two component normal cold-curing engineering repair compound. A good machineable product with high mechanical
REBUILD properties and good heat resistance. Base & Activator giving: 0,50 l Engineering Repair Compound.
663427 METAL GRADE A ceramic and stainless-lled one part water based paste. It is temperature resistant up to 1093 C (2000 F). It is used to
HI - TEMP seal joints, defects, cracks and voids in cast iron, steel and stainless steel 10 pouches giving: 0,13 l Repair Compound.
659250 AQUAGRADE A two component engineering repair compound.The product can be applied mixed and will cure under water. Preferably
REBUILD mix above water. Base & Activator giving: 0,5 l Engineering Repair Compound.
659268 CERAMIGRADE A two component ceramic cold-curing compound with excellent resistance to cavitation and erosion found in uid ow
REBUILD environments. Used for rebuilding heavy wear on pumps, impellers, valves etc. Base & Activator giving: 0,5 l Engineering
Repair Compound.
659276 CERAMIGRADE A two component ceramic cold curing uid that is used as a liner in order to prevent cavitation and erosion found in uid
LINER ow environments. Base & Activator giving: 0,5 l Engineering Repair Fluid.
725291 CERAMIGRADE A two component ceramic cold curing compound with excellent resistance against heavy abrasion. Specically ment for
ABRASHIELD Dredgers and Cement carriers.
5.4KG
659284 RUBBERGRADE A two component cold-curing vulcanising repair compound. Provides a strong long term repair on rubber items or on
6 REBUILD metallic surfaces. For repairs of hoses, gaskets, electric cables etc. Set of 3 x 0,143 l Engineering Repair Compound
659292 RUBBERGRADE A two component cold-curing vulcanising repair uid that can be moulded or painted on to rubber or metallic surfaces. Set
6 REMOULD 3 x 0,143 l Engineering Repair Fluid.
483
MA
MARRINE P
PRRODUCTS Cold Repair System
Cold Repair Polymer Compounds
POLYME
MERRK
KIT
IT
106 659300
Features
Each product has its specied place
Compact design
Broad range of different products
Benets
Easy overview and access to content
Requires little space
Able to provide cold curing polymer products for all
normal repair applications onboard
The complete polymer repair system KIT ALFA is available in Unitor's rubbergrade products are cold-vulcanising
a handy kit for easy storage and transport. Each product set elastomeric repair materials for use on rubber as well as
has its specied place in the kit, and the individual products metal components.
may be relled as needed. The products are compatible with all ferrous and non-ferrous
The unitor cold repair system covers emergency repairs as metals as well as most plastics, and have proven themselves
well as permanent repairs on pipes, all types of mechanical as permanent repairs. They have excellent chemical
equipment and machine components onboard, including resistance and are suitable for permanent immersion in
non-weldable materials. many environments including sea water, hydrocarbons, oils
and a very wide range of chemical solutions.
Unitor's metalgrade, aquagrade and ceramigrade products
are a range of cold-curing metal repair and rebuilding The basic range of products is selected in order to provide a
materials based on the latest polymer resin technology versatile program for onboard applications. The application
which is the result of many years of development. areas complement and extend the various welding and
related thermal processes already in use, providing an even
more complete repair system.
Ordering information
All necessary application equipment technical data sheets
and health & safety data sheets included.
484
MA
MARRINE P
PRRODUCTS Cold Repair System
Cold Repair Polymer Compounds
LEAK S
STTOP P
PIP
IPE
ERRE
EPAIR T
TA
APE
Water activated cold curing product for emergency repairs of leaking pipes
Features
Can be used for all types of pipes, even most plastic types
Activated by submerging in water
Do not produce any heat during curing
Comes with MSDS, tech sheet, gloves and application tools
Benets
No need to consider what base material in pipe consists of
No need to mix with activator to start curing
No sparks and spatter that can create a re or explosion
No distortion of the base material
All accessories to do the job available
Ordering information
Supplied with: 1 pair of gloves
Ordering information
Product Number Product name
630384 LEAK-STOP PIPE REPAIR I
606006 LEAK-STOP PIPE REPAIR II
630392 LEAK-STOP PIPE REPAIR III
485
ME
METTALGRADE R
REEADY S
STTIC
ICKK3P
PA
AIR
IRS
SOOF
FSST
TIC
ICK
KS
0.72K
2KG
G
101 659227
Features
Base and activator as two separate sticks
Does not produce any heat during curing
Comes with all necessary application equipment, SDS, technical sheet and gloves
Benets
No possibility that product will unintentionally start curing
No sparks
No distortion of the base material
All accessories available
ME
METTALGRADE E
EXXPRESS B
BAASE A
AND
ND A
AC
CTIV
IVA
ATOR
0.25L
101 659235
Features
Can be used for most types of base materials
Extremely fast curing
Workable deposit
Does not produce any heat during curing
Comes with all necessary application equipment, SDS, technical sheet, gloves and application tools
Benets
No need to consider what base material consists of
Repairs can be done fast
Deposit can be machined, drilled or grinded
No sparks
No distortion of the base material
All accessories available
486
MA
MARRINE P
PRRODUCTS Cold Repair System
Cold Repair Polymer Compounds
ME
METTAL G
GRRADE R
REEBUIL
ILDDB
BAASE A
AND
ND A
AC
CTIV
IVA
ATOR
0.5L
101 659243
Features
Can be used for most types of base materials
Workable deposit
Does not produce any heat during curing
Comes with all necessary application equipment,
SDS, technical sheet, gloves and application tools
Benets
No need to consider what base material consists of
Deposit can be machined, drilled or grinded
No sparks
No distortion of the base material
All accessories available
Ordering information
Set weight: 1.1 kg
487
MA
MARRINE P
PRRODUCTS Cold Repair System
Cold Repair Polymer Compounds
ME
METTAL G
GRRADE HI - T
TEEMP HE
HEAAT R
REESIS
ISTTANT
COMP
MPO
OUND
101 663427
A one part water based ceramic and stainless compound for high temperature applications
Features
Can be used for most types of base materials except aluminium
Inorganic deposit
Workable deposit
Does not produce any heat during curing
Comes with all necessary application equipment, SDS, technical sheet, gloves and application tools
Benets
No need to consider what base material consists of
Temperature resistant up to 100 C dry heat
Deposit can be machined, drilled or grinded
No sparks
No distortion of the base material
All accessories available
Set weight 0.42 kg seal joints, defects, cracks and voids in cast iron, steel and
stainless steel. 1 tin giving 0,13 l repair compound.
A ceramic and stainless-lled one part water based paste. It
is temperature resistant up to 100C (200F). It is used to
488
MA
MARRINE P
PRRODUCTS Cold Repair System
Cold Repair Polymer Compounds
AQUAGRADE R
REEBUIL
ILDDB
BAASE A
AND
ND A
AC
CTIV
IVA
ATOR 0
0..5L
101 659250
Features
Can be used for most types of base materials
Deposit will cure underwater
Workable deposit
Does not produce any heat during curing
Supplied with all necessary application equipment,
SDS, technical sheet, gloves and application tools
Benets
No need to consider what base material consists of
Can be used for underwater applications
Deposit can be machined, drilled or grinded
No sparks
No distortion of the base material
All accessories available
489
CERAMIG
MIGR
RADE R
REEBUIL
ILDDB
BAASE A
AND
ND A
AC
CTIV
IVA
ATOR
0.5L
102 659268
Features
Can be used for most types of base materials
Ceramic bead ller
Does not produce any heat during curing
Comes with all necessary application equipment,
SDS, technical sheet, gloves and application tools
Benets
No need to consider what base material consist of
Superb for uid ow environment
No sparks and spatter that can create a re or explosion
No distortion of the base material
CERAMIG
MIGRRADE L
LINE
INER
RBBA
ASE A
AND
ND A
AC
CTIV
IVA
ATOR 0
0..5L
102 659276
Features
Can be used for most types of base materials
Ceramic bead ller
Does not produce any heat during curing
Comes with all necessary application equipment,
SDS, technical sheet, gloves and application tools
Benets
No need to consider what base material consist of
Superb for uid ow environment
Can be applied using a brush
No sparks and spatter that can create a re or explosion
No distortion of the base material
490
MA
MARRINE P
PRRODUCTS Cold Repair System
Cold Repair Polymer Compounds
CERAMIG
MIGRRADE A
ABBRASHIE
HIELLD 5.
5.4K
4KG
GEENG
NGINE
INEE
ERING
REPAIR C
COOMP
MPOOUND
102 725291
Two component cold curing ceramic repair compound with excellent resistance against heavy
abrasion. Specically meant for dredgers and cement carriers.
Features
Can be used for most types of base materials
Large ceramic bead in epoxy matrix
Do not produce any heat during curing
Comes with all necessary application equipment, SDS, technical sheet, gloves and application tools
Benets
No need to consider what base material consist of
Long lasting coating overlay protection of parts subject to extreme wear
No sparks and spatter that can create a re or explosion
No distortion of the base material
All accessories to do the job available
Ordering information
Supplied with: 1 applicator
All necessary application equipment technical data
5400 g base + activator (3600 g base in a 2 liter tin sheets and health & safety data sheets
plus1800 g activator in a 1 liter tin)
1 spatula
491
MA
MARRINE P
PRRODUCTS Cold Repair System
Cold Repair Polymer Compounds
RUBBERGRADE 6 R
REEBUIL
ILDD3X0
0..143L B
BAASE/
ACTIV
IVA
ATOR
103 659284
Features
Can be used for most types of rubber and metals
Synthetic rubber compound
Does not produce any heat during curing
Comes with all necessary application equipment,
SDS, technical sheet, gloves and application tools
Benets
No need to consider base material type
Multi-purpose
No sparks
No distortion of the base material
Set weight: 0.59 kg metallic surfaces. For repairs of hoses, gaskets, electric
cables etc. Set of 3 x 0,143 l Engineering Repair
A two component cold-curing vulcanising repair compound.
Compound.
Provides a strong long term repair on rubber items or on
492
MA
MARRINE P
PRRODUCTS Cold Repair System
Cold Repair Polymer Compounds
RUBBERGRADE 6 R
REEMO
MOUULD 3 X 0
0..143L B
BAASE/
ACTIV
IVA
ATOR
103 659292
Features
Can be used for most types of rubber and metals
Synthetic rubber compound
Product in uid state
Does not produce any heat during curing
Comes with all necessary application equipment,
SDS, technical sheet, gloves and application tools
Benets
No need to consider base material
Multi-purpose
Can be applied using a brush
No sparks and spatter that can create a re or explosion
No distortion of the base material
Accessories included
Set weight: 0.59 kg A two component cold-curing vulcanising repair uid that
can be moulded or painted on to rubber or metallic surfaces.
Set of 3 x 0,143 l Engineering Repair Fluid.
493
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!,&".*.()&-*$",360%'9*%
93/52$&0"(&
MARINE CHEMICALS
CLEANING CHEMICALS
AQUATUFF HIG
HIGHHF
FOOAM
Aquatuff High Foam is a heavy duty alkaline cleaner with good foaming qualities specially formulated for
cleaning cargo holds on bulk carriers and OBOs.
Features
Heavy Duty alkaline water based cleaner
Specially formulated for the cleaning of cargo holds
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Biodegradable
Free from hydrocarbon solvents
Benets
Ideal for cleaning after coal, pet coke and other difcult cargoes
Effective and economical in use
Completely safe on epoxy coatings
Complies with all environmental regulations and the EU Detergent Regulation
The dense foam created prevents the cleaning solution from standard. Aquatuff High Foam is specially developed for
running off vertical surfaces and thereby enhances the cargo hold cleaning, but may also be used for other cleaning
cleaning efciency. It is water based and is safe to the applications where Aquatuff normally is used but where high
environment, containing only biodegradable ingredients. It foam is benecial.
effectively removes most dry cargoes to water white
Ordering information
Product number Product name
736991 AQUATUFF HIGH FOAM 25 LTR
737007 AQUATUFF HIGH FOAM 210 LTR
496
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cargo Hold Cleaning
ME
METTAL B
BRRIT
ITEE HD
Liquid detergent compound containing phosphoric acid and non-ionic surfactants, used for rust
removal and as a surface brightener.
Features
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Removes tarnish from non-ferrous metals
Surface brightening including aluminium
Removes rust stains from painted, ceramic and wooden surfaces
Economical in use
Benets
Non-ammable
Removes light rust and rust stains
Cleans and passivates ferrous metal surfaces, inhibits further corrosion, and gives a base which paint will adhere
Ordering information
Product number Product name
571679 METAL BRITE HD 25 LTR
655506 METAL BRITE HD 210 LTR
497
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cargo Hold Cleaning
SLIP
IP-C
-CO
OAT
Slip-Coat is a water based liquid product specially formulated to leave a thin, temporary lm on cargo
hold surfaces.
Features
Water soluble cargo hold barrier easily removable with water
Ideal when cleaning after coal, pet coke and other difcult cargoes
Easy to apply easy to remove
Provides temporary protection against corrosion
Water based free from hydrocarbon solvents
Benets
Complies with all environmental regulations
Saves cleaning time and cleaning chemicals
Completely safe on all coatings
Prevents even the most difcult cargo to adhere to the coating
The lm provides a barrier between the cargo and the cargo Slip-Coat is safe to the environment and to the personnel
hold surfaces making the cleaning operation after unloading handling it, and will not contaminant the cargo. It is non-
quicker and easier, and optimal cleaning result is achieved. corrosive and safe on all coatings.
Ordering information
Product number Product name
737015 SLIP-COAT 25 LTR
737023 SLIP-COAT 210 LTR
Approvals
All substances used in Slip Coat comply with FDA
regulation 21 CFR 175.300
498
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cargo Hold Cleaning
SLIP
IP-C
-CO
OAT W
WRR
Slip-Coat WR is a liquid, water based product specially formulated to leave a temporary water resistant
lm on cargo hold surfaces.
Features
Water resistant cargo hold barrier - easily removable with an alkaline cleaner
Ideal when cleaning after humid and corrosive cargoes as sulphur
Easy to apply - easy to remove
Provides temporary protection against corrosion
Water based - free from hydrocarbon solvents
Benets
Complies with all environmental regulations
Saves cleaning time and cleaning chemicals
Completely safe on all coatings
Prevents even the most difcult cargo to adhere to the coating
The lm provides a barrier between the cargo and the cargo protected from corrosion making lime wash unnecessary.
hold surfaces making the cleaning operation after unloading Slip-Coat WR is safe to the environment and to the
quicker and easier, and optimal cleaning result is achieved. personnel handling it, and will not contaminant the cargo. It
The lm is water insoluble thus making it suitable for typically is non-corrosive and safe on all coatings.
humid cargoes as sulphur. The cargo hold surfaces are also
Ordering information
Product number Product name
757395 SLIP-COAT WR (25 LTR)
757396 SLIP-COAT WR (210 LTR)
499
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
ENV
NVIR
IRO
OCLEAN
Enviroclean is micro emulsion water based cleaner/degreaser that has numerous cleaning applications
including the removal of greases, oil, sludge, polymer compounds, carbon deposits, dirt and grime
Features
Water based degreaser
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Low-toxic
As an engine room cleaner it is exceptional as not only can it be used for degreasing, cleaning paint work and carbon
removal, but also for use in soak tanks, ultrasonic tanks and high pressure cleaning equipment
Benets
Promotes a pleasant and healthy working environment
Splits after cleaning, releasing the oil phase for reclamation
This product is low toxic, biodegradable and safe to use. It is cleaning and degreasing in the engine room and for deck for
based on natural citrus oil solvent linked with an advanced removal of grease, oil, sludge, polymer compounds, carbon
surfactant formulation. The main applications are for deposits, dirt and grime.
Ordering information
Product number Product name
571380 ENVIROCLEAN 25 LTR
571398 ENVIROCLEAN 210 LTR
500
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
COLDWASH HD
Coldwash HD is a heavy duty degreaser based on petroleum solvents, emulsifying agents and
surfactants. This product is excellent for use on soiled surfaces, bilges and machinery parts.
Features
The emulsifying agents in this product are biologically degradable
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Effective on mineral oils and petroleum based residues
Safe to use on most metal surfaces and painted surfaces
Removes oil contamination from machinery, engine parts and bilges
Soak cleaning of machinery parts
Benets
Easy to recover as it splits after cleaning, releasing the oil phase
Powerful degreaser with quick penetration and good emulsifying properties
Rapid rinsing, leaves clean and oil-free surfaces
Splits after cleaning, releasing the oil phase for reclamation. mineral oils and petroleum based residues. Safe to use on
A powerful degreaser with quick penetration and good most metal surfaces and painted surfaces. Removes oil
emulsifying properties. The emulsifying agents in this product contamination from machinery, engine parts and bilges.
are biological degradable. Does not contain nonyl phenol Soak cleaning of machinery parts. Rapid rinsing, leaves
ethoxylates or other estrogenic compounds. Effective on clean and oil-free surfaces.
Ordering information
Product number Product name Quantity
571430 COLDWASH HD 25 LTR 25 L
571455 COLDWASH HD 210 LTR 210 L
501
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
CLEANB
NBRREAK
Cleanbreak is a degreaser containing self-splitting emulsiers. It allows the slop water to break into
separate oil and water phases.
Features
Highly effective, economical solvent cleaner
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Reduces disposal costs and associated problems
Low toxicity, non corrosive
Benets
Rapid penetration
Slop emulsions break into two distinct phases
Allows oil residues to be reclaimed
Cleanbreak is solvent based. Used for general cleaning of required to pass through oily water separators to meet
machinery spaces, bulkheads, decks, tank tops and any oil/ current IMO regulations
grease soiled areas. Should be used where slops are
Ordering information
Product number Product name
571497 CLEANBREAK 25 LTR
571505 CLEANBREAK 210 LTR
502
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
SEACLEAN
652 571406
Seaclean is a highly concentrated cleaner based on petroleum solvents, emulsifying agents and
surfactants. It is formulated for cleaning double bottom, deep and wing tanks etc., used for fuel oils.
Features
The emulsifying agents in this product are biological degradable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Can be used for general removal of oil and grease from soiled surfaces
Benets
Highly concentrated cleaner with quick penetration and emulsifying properties
Economical - very low dosage rates
Ordering information
Product number Product name
571406 SEACLEAN 25 LTR
503
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
SEACARE O
O..S.D
Seacare Oil Spill Dispersant is a biodegradable hydrocarbon based product with high dispersing
efciency and low toxicity. It is approved as a Type I dispersant according to LR448 specications by
the Department for Environment, Food & Rural Affairs (DEFRA) (formerly the U.K. Ministry of Agriculture,
Fisheries and Food (MAFF)).
Features
Approved Type I dispersant according to the latest LR448 specications of AEA Technology Plc. covering both
efciency and toxicity for use in dispersing oil on sea,beaches and rocks
Ready to use product
For use on oil spills that may occur during loading or discharging of cargo or bunkers where allowed
For cleaning of spills on deck, ships side, piers, wharfs, etc. where allowed
Benets
Raised standards for operator safety in handling and use, being biodegradable and having low toxicity and a high
ash point
Rapid efcient dispersal of a wide range of oil residues. Converts hydrocarbons into very ne emulsions
Disperses mineral oils, crude oils, residual fuel oils, diesel fuel oil, kerosene, white spirit and lubricant oils
The denition for a Type I dispersant is that it is a spray sets using breaker boards or other suitable means of
conventional hydrocarbon-base - for use primarily undiluted application and agitation.
on beaches, but may also be used undiluted from WSL
Ordering information
Product number Product name
571562 SEACARE OSD 25 LTR
571570 SEACARE OSD 210 LTR
Approvals
Approved as a Type I dispersant according to LR448 DEFRA / MAFF-approval Reference No. MAFF/FEPA
specications by the Department for Environment, 90/98. SOAEFD-approval Reference No. FEP/DISP/
Food & Rural Affairs (DEFRA) former the U.K. Ministry 2001/6.
of Agriculture, Fisheries and Food (MAFF).
504
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
SEACARE E
ECCOSPERSE 5
522
Seacare Ecosperse 52 is a concentrated oil spill dispersant which is highly efcient for use on a wide
range of oils.
Features
Used as a dispersant:
High dispersion efciency product
Accelerates natural biodegradation of dispersed hydrocarbons
Helps prevent crude oil from ending up on shore
Simple, quick and efcient
Efcient dispersion of wide range of oils in a broad range of temperatures, salinity, and concentrations.
Used as cleaning agent:
High efciency for cleaning hydrocarbons (oils and other related products)
For cleaning of hydrocarbons spills on deck, ships side, piers, wharfs, etc., where allowed
Cleaning up after spills that may occur during loading of bunkers where allowed
Benets
Multi-purpose product: economical, safe, efcient
Low stocks required compared to Type I products
High standards in operator safety in handling and uses
Ordering information
Product number Product name
769653 SEACARE ECOSPERSE 52 25 LTR
769661 SEACARE ECOSPERSE 52 210 LTR
Approvals
Approved by DEFRA (UK) as a Type II/III dispersant SOAEFD. Scottish Ofce Agriculture, Environment
according to the LR448 Specications of AEA and Fisheries Department. Reference No. FEP/DISP/
Technology Plc. for dispersion efciency and the 2001/7
"Fisheries research Technical Report N 102"
Registered by the US EPA National Contingency Plan
covering the toxicity for use in dispersion of oil on (Federal Register, Subpart J - Use of Dispersants and
sea, beaches and rocks. Reference No. MAFF/FEPA
Other Chemicals)
129/2001. Type II and Type III dispersant
505
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
ACC P
PLLUS
651 698704
ACC Plus is a powerful cleaning agent for cleaning of diesel engine air coolers, scavenging air systems
and the compressor side of turbochargers. It is formulated to remove oil, grease and carbon deposits.
Features
Meets the latest environmental standards and has low toxicity, low evaporation and a pleasant smell
Leaves no residue and has no harmful effect on engine
Can be used for handspray cleaning while diesel engine is stationary
Ideal for use in soak bath or cleaning tanks, such as the Chemical Cleaning Unit and the Ultrasonic Bath
Benets
Efcient and economical
Maintains, stabilises and maximises air cooler efciency
ACC Plus is a microemulsion type cleaner, where a environmental standards, and is non toxic both to the
synergistic blend of biodegradable surfactants and low environment and to persons handling it. ACC Plus contains
toxicity solvents replace the use of the harmful solvents no chlorinated or aromatic hydrocarbon solvents, no
traditionally used in air cooler cleaners without reducing the nylphenol ethoxylates or other substances harmful to the
cleaning performance. It is formulated to meet the latest environment.
Ordering information
Product number Product name
698704 ACC PLUS 25 LTR
506
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
AIR C
COOOLER C
CLLEANE
NERR
651 571588
Air Cooler Cleaner is a powerful solvent emulsion cleaner for the cleaning of diesel engine air coolers,
scavenging air systems and compressor sides of turbochargers. It is formulated to remove oil, grease
and carbon deposits.
Features
May be used for in-service cleaning
Leaves no residue and has no harmful effect on engine
Can be used for light carbon removal from machinery parts
Benets
Efcient and economical, saves time and avoids risks of damage when dismantling
Renders surfaces oil-repellent
Maintains and stabilises air cooler efciency at maximum
Product in water solution is non-ammable, non-explosive and has no ash point
Ordering information
Product number Product name
571588 AIR COOLER CLEANER 25 LTR
507
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
CARBONC
NCLLEAN L
LT
T
651 575696
Carbonclean LT is a non-corrosive, quick, powerful solvent for removal of carbonaceous deposits. Can
be used for removal of carbon type deposits from burner tips, fuel injectors and all components fouled
by carbon, resin or varnishes. Cleans oil side of fuel and lube-oil heaters, oil coolers, etc.
Features
Reformulated with improved cleaning properties
Can be used for cleaning engine parts including, but not limited to pistons, piston rings, valves and valve cages
Non-corrosive, safe on all light metals, including aluminium
Low toxicity, no phenolic or chlorinated compounds
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Low evaporation rate
Benets
Simple and economical to use by soaking or circulation method
Eliminates need for hard scraping
Ordering information
Product number Product name
575696 CARBONCLEAN LT 25 LTR
CARBON R
REEMO
MOV
VER
651 571604
A powerful non-corrosive solvent for breaking down carbon deposits from burner tips, fuel injectors and
all components fouled by carbon, resin or varnishes
Features
Cleans oil side of fuel heaters, oil coolers, etc.
Can be used for cleaning of: pistons, piston rings, valve cages
Benets
Simple and economical to use
Non ammable
Eliminates need for hard scraping
Ordering information
Product number Product name
571604 CARBON REMOVER 25 LTR
508
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
DESCALEX
651 571646
Descalex is a dry acid cleaner formulated to remove rust and scale deposits.
Features
Dry acid cleaner contains inhibitors to protect metals
Fast and effective scale remover
Removes scale from boilers
Removes scale from diesel engine cooling water systems
Removes scale and rust from condensers, evaporators, heat exchangers etc.
Benets
Efcient, economical, safe
Contains colour indicator to show the strength of the solution and anti-foam agent
Safe and easy handling and storage
Unitor has developed a 210 litres capacity cleaning unit for cleaning boilers, caloriers, heat exchangers and other
designed among other for use with chemical acid solutions types of equipment where rust and scale form.
Ordering information
Product number Product name
571646 DESCALEX 25 KG
Accessories
Product number Product name
737189 CHEM. CLEAN. UNIT W/HEATING, COATED
509
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
DESCALING L
LIQ
IQU
UID
651 571653
Descaling Liquid is a liquid acid containing descaling accelerators, corrosion-inhibitors and wetting
agents. Descaling Liquid removes scale and rust from condensers, evaporators, heat exchangers, etc.
Features
Acid based product contains inhibitors against attack on ferrous metals
Easy to rinse off
Removes water scale from boilers
Benets
Fast and effective scale remover
Unlimited shelf life
Unitor has developed a 210 litres capacity cleaning unit for cleaning boilers, caloriers, heat exchangers and other
designed among other for use with chemical acid solutions types of equipment where rust and scale form.
Ordering information
Product number Product name
571653 DESCALING LIQUID 25 LTR
Accessories
Product number Product name
737189 CHEM. CLEAN. UNIT W/HEATING, COATED
510
ME
METTAL B
BRRIT
ITEE
651 571661
Liquid detergent compound containing rust dissolving acids, emulsiers and passivators and it is used
for rust removal and as a surface brightener.
Features
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
When cleaning aluminium, brass and copper, ush with water upon completion of cleaning
Benets
Prevents ash rusting
Surfaces rendered suitable for painting
Non-ammable
Ordering information
Product number Product name
571661 METAL BRITE 25 LTR
DIS
ISCCLEAN
651 571687
Disclean is a water based blend of inhibited acids, surfactants and emulsifying agents. Disclean
removes the heavy tenacious deposits which collects in fuel and lube oil centrifugal separators, and it is
extremely effective in removing these deposits without the necessity of separating the discs from the
stack.
Features
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Non-ammable
Cleans down to metal surfaces, leaves no lm or residue
Cleans all types of separator discs
Benets
Reduces down time
Allows cleaning of disc without dismantling of disc stacks
It is recommended that this product is not used on zinc, tin, The Unitor Chemical Cleaning Unit (Product no. 664
galvanised surfaces or anodised aluminium. 737189) can be used for soak cleaning of disc stacks.
Ordering information
Product number Product name
571687 DISCLEAN 25 LTR
511
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
DECK C
CLLEAN NP
651 765990
Deck Clean NP is a non-ammable liquid cleaning formulation containing acids, emulsiers and
passivators used for removal of rust and waterborne stains on super structure and on decks and
windows.
Features
Removes light rust and rust stains from painted and wooden surfaces, metals and glass
Does not contain nonylphenol ethoxylates or other estrogenic compounds, phosphoric acid free and is readily
biodegradable
Benets
Highly concentrated
Easy to rinse off
Ordering information
Product number Product name
765990 DECK CLEAN NP 25 LTR
TEAK R
REENE
NEWWER
651 758623
Teak Renewer is a dry acid product formulated for brightening wooden decks. For removal of oil and fat
and for daily cleaning use Aquabreak PX or HP-Wash.
Features
Dry acid deck cleaner
Surface brightening of wood, removes stains and discolouration
Benets
Quick, efcient cleaning power
Water soluble for ease of use
Ordering information
Product number Product name
758623 TEAK RENEWER 20 KG
512
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
AQUATUFF
Aquatuff is a heavy-duty water based alkaline cleaner. Aquatuff has numerous cleaning applications
including removal of grease, vegetable and animal oil, soot, general dirt and grime.
Features
Heavy duty water based cleaner
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Biodegradable
Free from hydrocarbon solvents
Aquatuff is most suitable for removal of wax deposits
Removal of soot deposits from inert gas systems
Ideal for cleaning after coal and pet coke
Benets
Effective and economical in use
Completely safe on epoxy coatings
It has numerous cleaning applications including removal of carbon deposits, dirt and grime. Aquatuff is also used for
greases, waxes, vegetable and animal oils, sludge, soot, cargo hold cleaning after coal and pet coke.
Ordering information
Aquatuff can be applied on vertical surfaces by adding
Unitor Foam-Agent for increased resident time.
Accessories
Product number Product name
614537 FOAM - AGENT 3X5 LTR
513
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
AQUABREAK P
PX
X
Aquabreak PX is a multipurpose waterbased cleaning and degreasing agent. The surfactant formulation
with complex binders has a good cleaning efciency. Dirt and oily matter is effectively removed without
the use of solvents and caustic based cleaners.
Features
Low toxic and non caustic (does not contain nonyl phenol ethoxylates or other estrogenic compounds)
Biodegradable
Non-ammable
Free from hydrocarbon solvents
Benets
Very effective and economical in use
Safe on all materials
Aquabreak PX has numerous general cleaning applications and on decks and suitable for cleaning of soiled textiles such
including the removal of grease, oil, sludge, carbon deposits as rugs, covers, mats, overalls etc. Effectively cleans
and grime. Can be used as engine room cleaner but also berglass boats. IMO approved and listed in Annex 10 of the
suitable for cargo tank cleaning, it s good for use in galleys MEPC.2/Circular
Ordering information
Aquabreak PX can be applied on vertical surfaces by adding
Unitor Foam-Agent for increased resident time.
Ordering information
Product number Product name
575613 AQUABREAK PX 25 LTR
575605 AQUABREAK PX 210 LTR
Accessories
Product number Product name
614537 FOAM - AGENT 3X5 LTR
514
FOAM-A
M-AG
GENT
651 614537
Foam-Agent is a water based non-ammable product. When using this foam additive, the cleaning
efciency of the cleaning chemicals will be enhanced. It will also be a more economical use of the
cleaning chemicals.
Features
Biodegradable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Benets
Suitable for use with our water based alkaline cleaning chemicals
Prevents the chemicals from running off vertical surfaces, and increases the resident time
Ordering information
Product number Product name
614537 FOAM - AGENT 3X5 LTR
MU
MULLTI C
CLLEAN
651 777708
Multi Clean is an alkaline mixture of water, natural citrus solvent and a synergistic blend of synthetic
surfactants. Multi Clean can be used for general cleaning of accommodation areas, oor plates and
engine room cleaning and has a pleasant citrus odour.
Features
Versatile- can be used for general cleaning
Non-ammable, non-toxic - Ingredients are all biodegradable
Benets
Highly effective concentrated cleaner
Environmentally adapted
Multiclean is formulated to meet the latest MARPOL European PARCOM regulations the product does not
regulations and does not contain any chlorinated solvents contain any Alkyl Phenol Ethoxylates. The ingredients of
and less than 10 % aromatics. Also, with respect to Multiclean are fully biodegradable.
Ordering information
Product number Product name
777708 MULTI CLEAN 25 LTR
515
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
REEFER C
CLLEANE
NERR
Reefer Cleaner is a combination of a highly effective alkaline cleaners and disinfectant in one product. It
is biodegradable and is effective against both gram negative and gram positive bacterias, fungi, mould,
algae and mildew.
Features
Water based alkaline cleaner and disinfectant
Safe to use on all types of surfaces including aluminium and plastic
Benets
High tolerance in hard water
Does not build up any resistance
Cleans and disinfects in one operation and removes bad odours
Reefer Cleaner is used for cleaning and disinfection of reefer leaving a clean surface, free from bacteria and other micro-
cargo holds and storage spaces, deep freezers, galleys and organisms. Effective against viruses, bacteria, algae, fungi
other food areas. It removes fat, grease and general dirt, and other micro-organisms.
Ordering information
Product number Product name
661827 REEFER CLEANER 25 LTR
623983 REEFER CLEANER 20 LTR BIB
516
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
FORE & A
AFFT
651 571554
Fore & Aft is a biodegradable, non-ammable cleaner containing surfactants and alkaline materials.
Suitable for cleaning accommodation and galley areas.
Features
Does not contain nonyl phenol ethoxylates or other
estrogenic compounds, non-caustic , phosphate free
Acceptable for use in the food storage areas
Suitable for cleaning of sanitary xtures i.e. showers, toilets etc
Can be used on windows and port holes
Benets
Economical in use
Ordering information
Product number Product name
571554 FORE AND AFT 25 LTR
517
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
H.
H.PP. W
WA
ASH
651 571729
H.P. Wash is an alkaline cleaner with detergents and surfactants which quickly dissolve grease and dirt
deposits. H.P. Wash is designed for use with high pressure cleaning machines such as Unitor High
Pressure Cleaners. It's suitable for most painted surfaces and dries leaving a good shine.
Features
Reformulated with improved cleaning properties
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Biodegradable cleaner
Non-ammable
Low dose rates 0.55%
Leaves a good shine on hard surfaces after cleaning
H.P. Wash is suitable for hot or cold high pressure spray equipment
Can be used for general cleaning in the engine room, outside paint work and on the deck
Can be used on Ro/Ro vessel car decks, for removal of trafc lm
Can be used for cleaning of sh holds and process machinery onboard factory vessels
Phosphate free
Benets
Formulated for use with H.P. cleaning machines
Rapid dispersal of a large range of oils and greases
Leaves a good shine on hard surfaces after cleaning
Ordering information
Product Number Product name
571729 HP WASH 25 LTR
518
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
UNI-W
NI-WA
ASH
651 571745
Uni-Wash is a liquid detergent with good foaming qualities. Uni-Wash is suitable for accommodation
cleaning of woodwork, leather, desks, cleaning of toilets and showers etc.
Features
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Non-ammable
Pleasant smell
Leaves surfaces residue free
Benets
Acceptable for use in food areas
Can be used for cleaning of dishes, windows and port holes
Ordering information
Product number Product name
571745 UNIWASH 25 LTR
519
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
ULTRA S
SOONIC C
CLLEANE
NERRU
USSC
651 607819
Unitor USC is a water-based alkaline low-toxic product with an exceptional solvency power on soil and
oily matter.
Features
Water-based
Low-toxic
Biodegradable
Non-ammable
Free of hydrocarbon solvents
Self splitting
Benets
Specially developed for use with ultrasonic cleaning baths
Removes grease, oil, carbon deposits, soil and grime
Keeps loosened deposits in suspension preventing re-deposition
Effective and economical in use
Ordering information
Product number Product name
607819 UNITOR USC 12 X 1 LTR
520
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
NA
NAT
TURAL HA
HAND
ND C
CLLEANE
NERR
651 571752
Natural Hand Cleaner is an orange gel skin cleaner containing natural ingredients such as citrus oils.
Features
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Pleasant citrus smell
Effective and suitable for the most severe soiling
Easier to rinse off than many other gel cleaners
Benets
Mild antiseptic properties. Due to its mildness it can be used safely day after day.
Contains poly beads which act like a light scrubbing brush to assist the cleaning action. The poly beads are harmless
to bilge pumps.
Ordering information
Product number Product name
571752 NATURAL HANDCLEANER 4X5 LTR
521
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
CARPET C
CLLEANE
NERR
651 659409
Carpet Cleaner is a soil extraction cleaner for use on a wide range of carpets. Low foaming with a
unique surfactant system that leaves no residue that contributes to resoiling.
Features
Low foaming detergents
Biodegradable
Safe to use no special handling requirements
Free of colourants
Benets
Compatible with all known carpet cleaning machines
Leaves no sticky residue that contributes to resoiling
Leaves a fresh odor
Ordering information
Product number Product name
659409 CARPET CLEANER 12X1 LTR
522
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
ULTRACIP
651 770727
Ultra CIP is a multi-purpose product that can handle several different applications as well as solve and
clean complex contaminations. UltraCIP can be used in Cleaning In Place applications.
Features
Non-ammable.
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Removes heavy tenacious deposits
The product is self splitting
Benets
Cleans down to metal surfaces and leaves no lm or residue
Reduces down time as it allows cleaning of discs without dismantling the separator
It removes deposits like coked oil, oil mixed with hard deposits from glycol and similar products. The product is
deposits like rust and lime. Ultra CIP can also remove readily biodegradable.
Ordering information
Product number Product name
770727 UNITOR ULTRACIP 25 LTR
523
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
COMMIS
MMISSSIO
IONING
NING C
CLLEANE
NERR
651 624932
Commissioning Cleaner is a multifunctional water based cleaner. Commissioning Cleaner can be used
for cleaning of new systems for mill scale, rust, oil etc. it also cleans water systems with light scale and
a thin oil lm.
Features
Biodegradable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Safe on aluminium, zinc, tin and their alloys
Quick separation of oil after cleaning
Benets
Provides a temporary protection against corrosion by passivation
No need of neutralization chemicals afterwards
It is the new generation in one step cleaner products. scale, rust, oil and grease at the same time from the
Commissioning Cleaner is for cleaning of new boilers and systems. The product is recirculated through the system,
cooling systems on board new buildings. It will remove using an external circulation pump.
Ordering information
Product number Product name
624932 COMMISSIONING CLEANER 25 LTR
524
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
BIL
ILG
GE W
WA
ATER F
FLLOCCULANT
651 690669
Bilge Water Flocculant is a very effective liquid treatment based on Poly Aluminium Chloride (PAC) to
separate oil residues from bilge water. It is iron-free, and is completely safe to the environment.
Features
Iron-free, completely safe to the environment
Acts by both breaking the oil-in-water emulsion and by building ocs
Remaining oil sludge can be burned onboard or pumped ashore-contains very little water
Effective over an extended pH-range. Eliminates the use of pH-stabilising chemicals
Benets
Low dosage, economical use
Cost-effective bilge water treatment based on specially selected Poly Aluminium Chloride
Helps to meet environmental regulations on oil content. Discharged water contains normally less than 3 ppm oil
International environmental regulations set strict rules as to breaking, occulation and ltration. After dosing, Bilge Water
the oil content in efuent water from ships. To meet these Flocculant breaks the oil-in-water emulsion created by
regulations, a combination of mechanical and chemical contaminants in lubricating and fuel oils, emulsifying cleaning
cleaning is necessary. Bilge Water Flocculant is used in agents etc. It then destabilizes the remaining small oil
combination with multistage bilge water cleaning systems droplets and agglomerates them into larger particles (ocs)
that include mechanical separation of free oil, emulsion that are easily collected by ltering.
Ordering information
Product number Product name
690669 BILGEWATER FLOCCULANT 25 LTR
525
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
DEFOAME
MERRC
COONC
NCEENT
NTRRATE
Defoamer Concentrate is a non-silicone based water dispersible, liquid defoamer. It controls foaming in
sewage and waste water systems, and it is stable in alkaline conditions. Defoamer Concentrate can be
used to remove foam in water based systems and collecting tanks in vacuum toilet systems.
Features
Non-silicone defoamer
Stable in alkaline conditions
Can be used in sewage and waste water systems
Benets
Outstanding for all atmospheric, pressurised and continuous waste equipment
Excellent to control foaming and remove foam when necessary
Ordering information
Product number Product name
661843 DEFOAMER CONCENTR. 25 LTR
624314 DEFOAMER CONCENTR. 20 LTR BIB
526
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
PENE
NETTRON P
PLLUS
651 575506
Penetron Plus is a fast acting liquid compound containing special oils and solvents that penetrate iron
oxides and loosens carbon deposits. Penetron Plus loosens corroded parts as nuts, bolts, etc.
Features
Liquid oil based product
Low-toxic, emits no toxic fumes or vapours
Fast acting penetration of rusty seized up parts
Keeps tools clean and rust free
Cleaning of rusty and soiled metal parts
Protection of machinery parts and tools
Benets
Helps to avoid cutting or burning off bolts from engines or machinery
Dismantling of assemblies seized up from rust and soiling
Ordering information
Product number Product name
575506 PENETRON PLUS 12 X 0.5 LTR
527
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Cleaning and Maintenance
ELECTROSOLV-E
651 604389
A non-chlorinated solvent with a controlled evaporation rate for cleaning and degreasing electrical
equipment.
Features
Powerful solvent with controlled evaporation
Rapid penetration and action
Efcient cleaning with no grease lm or moisture residue
Benets
Harmless to electrical insulation- tested for breakthrough voltage after DIN-57370 to 209 KV/cm
Non-corrosive - can be used on all normal components with no risk of corrosive damage
Cleans and degreases electrical parts and equipment without the need for rinsing
Ordering information
Product number Product name
604389 ELECTROSOLV - E 25 LTR
MU
MUDD&S
SIL
ILT
TRRE
EMO
MOV
VER
652 635326
Mud & Silt Remover is a liquid compound. It keeps mud in suspension and cleans fouled systems
completely. Mud & Silt Remover removes sediments, silt and mud from ballast tanks, cooling water
systems, pipelines, etc.
Features
No acids, alkali or solvent
Biodegradable
Non-toxic and non-ammable
Inject in small quantities into the ballast or cooling water system to be cleaned
Benets
Effective and economical in use
Keeps mud in suspension and cleans fouled systems
Ordering information
Product number Product name
635326 MUD & SILT REMOVER 25 LTR
528
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Tank Cleaning
SEACLEAN P
PLLUS
Seaclean Plus is a modern low-toxic, biodegradable solvent based product. It meets IMOs
requirements regarding safety and pollution hazards of chemicals. This product is excellent as a tank
cleaner and degreaser.
Features
The emulsifying agents in this product are biodegradable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Can be used for cleaning and gas-freeing of double bottom, deep, and fuel oil tanks at sea
Can also be used for cleaning and gas-freeing of crude and rened mineral oil cargo tanks
Can be used for degreasing and cleaning of bilge spaces and engine rooms
Safe to use on most metal surfaces, painted surfaces and tank coatings
Benets
Highly concentrated tank cleaner with quick penetration and powerful emulsifying properties
Easy rinse off, leaving clean and oil-free surfaces
Economical, very low dosage rates
Versatile, can be used for a wide range of applications
Easy to use by any conventional means
Ordering information
Product number Product name
654715 SEACLEAN PLUS 25 LTR
654723 SEACLEAN PLUS 210 LTR
Approvals
IMO approved and listed in Annex 10 of the MEPC.2/
Circular
529
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Tank Cleaning
ALKLEEN L
LIQ
IQU
UID
Alkleen Liquid is a heavy duty water based alkaline tank cleaner, containing natural based detergents.
For zinc silicate coatings use Alkleen Safety Liquid.
Features
Reformulated with improved cleaning properties
Powerful alkaline tank cleaner containing detergents
Non-ammable
Non-corrosive to ferrous metals and epoxy coatings
Rapid rinsing
Removes hardened oxidised oil and grease deposits
Can also be used as nal treatment for cleaning tank from black to white or grain
Can be used for hydrocarbon freeing of cargo tanks
Benets
The emulsifying agents are biodegradable
Rapid penetration and emulsication of vegetable, animal and sh oils
Used as heavy duty cargo tank cleaner following discharge of drying, semi-drying and non-drying natural oils and
fats
Alkleen Liquid is a powerful cleaner for cleaning of cargo sanitising and deodorising prior to changing to foodstuffs. To
tanks after discharge of drying, semi-drying and non-drying achieve the high standard of cleanliness required, a nal
natural oils and fats. Alkleen Liquid can be used for tank wash will be necessary by using this product.
Ordering information
Product number Product name
756255 ALKLEEN LIQUID 210 LTR
756254 ALKLEEN LIQUID 25 LTR
Approvals
IMO approved and listed in Annex 10 of the MEPC.2/
Circular.
530
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Tank Cleaning
ALKLEEN S
SAAFETY L
LIQ
IQU
UID
Non-caustic water based alkaline cleaner, containing corrosion inhibitors to prevent the corrosion of
metals such as zinc, aluminium, copper, brass and tin. Alkleen Safety Liquid minimises the hazards in
handling caustic based materials.
Features
Non-caustic
Non-ammable
Does not contain nonyl phenol ethoxylates or other estrogenic compounds
Non-corrosive to ferrous metals
Benets
Safe, meets current regulation
Suitable for all tank-coatings
Can be used for gas and hydrocarbon-freeing of tanks
Can be used for deodorizing
Ordering information
Product number Product name
571521 ALKLEEN SAFETY LIQ 210 LTR
571513 ALKLEEN SAFETY LIQ 25 LTR
Approvals
IMO approved and listed in Annex 10 of the MEPC.2/
Circular
531
TANK
NKLLEEN A
ADDVANC
NCEE
652 571489
Tankleen Advance is a microemulsion water based tank cleaner. Main application is for hydrocarbon
freeing but can also be used for other tank cleaning purposes where strong degreasing effect is
required.
Features
Water-based degreaser
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Benets
Splits after cleaning, releasing the oil phase for reclamation
Low toxic and safe to use, contains natural solvents linked with easily biodegradable surfactants.
Ordering information
Product number Product name
571489 TANKLEEN ADVANCE 210 LTR
Approvals
IMO approved and listed in Annex 10 of the MEPC.2/
Circular
TANK
NKLLEEN B
BRRIG
IGHT
HT
652 766097
Tankleen Bright is formulated for effective removal of white residues from epoxy-coatings remaining
after carriage of fatty acids as well as stains removal and to upgrade coated cargo tanks.
Features
Solvent-free, non-ammable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Benets
Concentrated product, economical in use
Odourless
Ordering information
Product number Product name
766097 TANKLEEN BRIGHT 190 LTR
Approvals
IMO approved and listed in Annex 10 of the MEPC.2/
Circular
532
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Tank Cleaning
UNIP
NIPOOL
Unipol is a pH-neutral, liquid concentrated detergent with good cleaning qualities. Unipol can be used
for gas and hydrocarbon-freeing of tanks and can also be used for deodorizing of tanks.
Features
Non-caustic, pH neutral
Solvent free
Non-ammable
Does not contain nonylphenol ethoxylates or other estrogenic compounds
Non-corrosive to metals
Benets
Suitable for all tank-coating
Complies with all environmental regulations and the EU Detergent Regulation
It contains effective but mild and environmentally safe hydrocarbon freeing of tanks, and is safe on all tank coatings
wetting agents and surfactants that allow rapid penetration including zinc silicate.
to remove fats and oils. Unipol is especially suitable for
Ordering information
Product number Product name
736983 UNIPOL 210 LTR
736975 UNIPOL 25 LTR
Approvals
IMO approved and listed in Annex 10 of the MEPC.2/
Circular
533
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Tank Cleaning
ZINC C
COOAT C
COOND
NDIT
ITIO
IONE
NER
R
Zinc Coat Conditioner is a clear organic liquid based on acetates. Zinc Coat Conditioner cleans and
upgrades coated cargo tanks after leaded gasoline, carbon tetrachloride, methylene chloride and virgin
naphtha.
Features
Organic based liquid cleaner
Biodegradable
Free from hydrocarbon solvents
Benets
Removal of white deposits (metallic salts) from tank coatings
Cost effective in use
Zinc Coat Conditioner cleans and upgrades coated cargo cost effective way to remove lead, chloride, zinc, salts and
tanks that have contained leaded gasoline, carbon iron sulphite from the pores of zinc silicate and epoxy
tetrachloride, methylene chloride or virgin naphtha. It is a coatings.
Ordering information
Product number Product name
661801 ZINC COAT CONDITIONER 25 LTR
625558 ZINC COAT CONDITION 210 LTR
Approvals
IMO approved and listed in Annex 10 of the MEPC.2/
Circular
534
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Gamazyme Cleaners
GAMA
MAZZYME 7
700F
00FNN
656 571711
Features
Powder formulation for easy use
Biodegradable
Reactivates biological activity in systems which have been rendered inactive by overloading, washout or use of
aggressive cleaning products
Eliminates the need for hazardous chemicals
Cost-effective, saves time, money and manpower
Benets
Eliminates the odours associated with sanitary systems which are overloaded or blocked
Cleans sewage holding tanks without the need for manual entry
Clears pipes and systems blocked by organic waste matter
Clears organic materials in slow draining pipes and scuppers
Restarts septic sewage treatment plant
Keeps complete sanitary systems in optimum operational condition
The degradation of paper, protein and waste product activity in the marine sewage treatment plant is greatly
residuals is greatly increased, and the odours that these increased, so the plant can thus handle more waste. The
produce, are reduced. obnoxious smells in toilet areas and scuppers, normally
associated with overloaded or blocked systems, are
The bacteria in Gamazyme 700FN will colonise the waste
reduced.
organic material which lines the pipework/tank system and
degrade the waste until the system is clean. The biological
Ordering information
Product number Product name
571711 GAMAZYME 700FN 12KG
535
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Gamazyme Cleaners
GAMA
MAZZYME MS
MSCC
656 587618
Gamazyme MSC is a unique biologically active liquid formulation containing specialised bacterial strains
and biodegradable chemical cleaners. Gamazyme MSC is effective in cleaning or removing organic
residues from hard and soft surfaces, such as urine, dog faeces, food, milk, chocolate syrup, tomato
sauce, etc.
Features
Unique liquid biological formulation for easy use
Biodegradable
A unique technology to remove odours on surfaces and especially on carpets
Safe, no special handling requirements
Benets
Replaces harsh cleaners which often require haz-chem labelling and may be hazardous to the user and the
environment
Spot cleaning of carpets, drapes, laundry
Cleans sinks, showers, decks, tiles and bathrooms
Removes obnoxious odours from drains and scuppers
On soft surfaces such as carpet, Gamazyme MSC is Chemical cleaning action by removing solids from
formulated to spot clean and deodorise the surface by surfaces.
digesting organic substances over time. Immediate odour control by fragrance masking.
Deep cleaning from biological action for removal of
Three way action:
residual organic.
Ordering information
Product number Product name
587618 GAMAZYME MSC 12X1 LTR
536
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Gamazyme Cleaners
GAMA
MAZZYME B
BTTC
656 589945
Gamazyme BTC is a unique biological active liquid formulation containing specialised bacterial strains,
biodegradable low foaming chemical cleaners and anti-foam agents. Gamazyme Biological Toilet
Cleaner is specically formulated to replace aggressive, toxic toilet cleaners that can disable the
sewage treatment plant by killing the naturally occurring bacteria which are essential to its operation.
Features
Biodegradable
Suitable for use in all marine sanitary and sewage treatment systems
Safe, no special handling requirements
Replaces conventional cleaners potentially harmful to the biological sewage system
Benets
Cleans toilets, sinks, showers, etc.
Digests faeces, grease, fat, starch and other solid waste materials
Removes obnoxious odours from the sanitary system
Easy to use
Conventional toilet cleaners may also cause foaming in the Grease, fats, starch and other organic compounds are
vacuum inductor which destroys the vacuum in the sanitary digested by Gamazyme BTC. The degradation of paper,
ushing system. protein, waste product residuals and other odorous
materials is also enhanced.
Gamazyme BTC effectively cleans the toilets, dosing millions
of selected safe bacteria into the sanitary system. These Gamazyme BTC cleans more thoroughly and deeply
powerful specialised bacteria colonise the organic waste compared to conventional cleaning products. The use of
lining the pipe system and remove the organic deposit. On cleaning products containing hazardous chemicals such as
draining to the sewage treatment plant, the bacteria will acids, caustics, bleaches, disinfectants, etc., can be
enhance the biological activity, reducing solids and odours. reduced.
Ordering information
Product number Product name
589945 GAMAZYME BTC 12 X 1 LTR
537
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Gamazyme Cleaners
GAMA
MAZZYME T
TDDS
656 743146
Gamazyme Toilet Descaler is used for descaling toilet bowls, toilet systems, drains and pipes.
Features
Biological powder descaler
Formulation based on weak acids, bacterial strains and enzymes
Benets
Removes uric acid and deposits
Descales both inorganic and organic material
Immediate action due to its chemical composition
Digests fat, grease, and oil in toilets, drains and pipes
Descales toilet bowls, toilet systems, drain and pipes
Leaves a fresh smell
Gamazyme Toilet Descaler is based on weak acids, bacterial capable of digesting fat, grease and oil found in toilets,
strains and enzymes formulated to dissolve organic drains and pipes. No need for dismantling of drains and
materials, uric acid and scale. It is packed in 50 gram water pipes when used either on a preventative or on a regular
soluble sachets. Acts immediately due to its chemical service basis.
composition. Secondary action due to its micro-organisms
Ordering information
Product number Product name
743146 GAMAZYME TDS 5 KG BLUE SACH W/MINT
538
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Gamazyme Cleaners
GAMA
MAZZYME D
DIG
IGE
ESTOR
656 624015
Features
Water based biological drain cleaner for slow running drains
Patented, environmentally friendly bioenzymatic formulation designed to restore ow in drain systems containing
greasy deposits
Results in increased bacterial activity in a variety of organic wastes
Environmentally adapted
Benets
Free of harsh chemical compounds normally associated with acid and caustic drain openers
Provides penetration, breakdown and degradation of organic drain line deposits and blockages
Ideal for applications subject to aerobic and anaerobic environments
Utilising active enzymes to eat through biological and non-corrosive product used to restore ow in drains where
organic waste products, Gamazyme Digestor is a safe and grease accumulation is a problem.
Ordering information
Product number Product name
624015 GAMAZYME DIGESTOR 20 LTR BIB
539
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Gamazyme Cleaners
GAMA
MAZZYME D
DPPC
656 587055
Features
Powder biological formulation for easy use
Biodegradable
Overcomes potential safety problems associated with the use of toxic cleaning chemicals
Benets
Clears pipes and systems blocked by organic waste residuals
Eliminates obnoxious odours from soiled pipe lines
Cleans fouled pipes and systems, particularly long horizontal runs
Keeps holding tank organic waste liquid pumpable and odour free
Cost effective, saves the time, money and manpower of plumbing operations to clear blocked pipe work
The specialised bacterial strains and enzymes in Gamazyme is clean. On draining to the holding tank or sewage
DPC will digest grease, fats, starch and other organic treatment plant, Gamazyme DPC will greatly enhance the
compounds. biological activity breaking down solids and removing
obnoxious odours which can vent back through the
The bacteria in Gamazyme DPC will colonise the waste soil,
systems.
which lines the pipe work system, and degrade the waste all
the way down to carbon dioxide and water, until the system
Ordering information
Product number Product name
587055 GAMAZYME DPC 4.0 KG
540
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Gamazyme Cleaners
GAMA
MAZZYME B
BOOE
Gamazyme BOE is a new approach in odour control technology. It provides deep and effective cleaning
through microbial activity. After odour elimination, the odour causing compounds are biodegraded by
the bacteria strains. Gamazyme BOE provides a powerful combination of a fast-acting neutraliser for
immediate odour relief, and adapted bacteria for degradation of organic compounds.
Features
Water based neutral odour control
Fast-acting environmentally friendly odour controller with the effectiveness of deep cleaning microbes
Available in 20 L bag in a box, as well as easy to use 1 L bottles
Benets
Rapidly neutralises and eliminates odours without relying on the use of odour masking or hazardous chemical
oxidisers
Enhances the activity of the natural bacteria, resulting in higher rates of degradation
Removes odours from garbage and waste collection areas, rest rooms, galleys, etc.
Rapid and long term effect
Gamazyme BOE eradicates odours by attacking and 3. Cleaning action by organic breakdown
degrading the organic source of the odour. 4. Accelerated microbial degradation
4 way action: Gamazyme BOE is a specialised bacterial formulation
designed to eliminate odour in garbage and waste collection
1. Fragrance for rapid action
areas, rest rooms, galleys, etc.
2. Binding for capturing odour
Ordering information
Product Number Product name
624619 GAMAZYME BOE 12X1 LTR
624077 GAMAZYME BOE 20 LTR BIB
541
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Gamazyme Cleaners
GAMA
MAZZYME F
FCC
656 659391
A technologically advanced oor care product that provides deep and effective cleaning through
microbial activity. Gamazyme FC is based on patented fatty acid degrading bacteria strains and
biodegradable surfactants. Regular use of Gamazyme FC provides improved safety and hygiene in
galley areas.
Features
Excellent in-depth cleaning properties
Contains specialized patented bacterial strains forming enzymes that break down fatty acid components of grease
Safe to use on all surfaces
Environmentally friendly
Benets
Reduced slippage and improved safety conditions in galley area
Penetrates porous oor surfaces to degrade accumulated grease and other organic materials
Eliminates odours that attract insects; the residual organics that feed them are eliminated
Friendly bacterial strains replace pathogenic bacteria for improved hygiene
Results in a fresher smelling galley area
Gamazyme FC is a unique oor care product that degrades improved safety. Ingredients in Gamazyme FC enable it to
and eliminates accumulated grease and other organic penetrate and clean embedded residual organics left in
materials. Patented fatty acid degrading bacteria strains pores, cracks, corners, crevices and microscopic pores in
produce enzymes specic for the breakdown of the harder oor surfaces. Regularly use of Gamazyme FC will eliminate
to degrade fatty acid components of oils and fats used in odors that attract insects; the residual organics that they
galley area. Excellent cleaning properties eliminate grease feed on will be eliminated.
from oor surfaces resulting in reduced slippage and
Ordering information
Product number Product name
659391 GAMAZYME FC 4X5LTR.
542
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Cleaning Chemicals
Gamazyme Cleaners
GAMA
MAZZYME B
BUUB
Gamazyme BUB (Biological Urinal Blocks) is a blend of selected bacteria strains and chemical cleaners,
formulated to reduce odour problems and blockages in urinals and pipe work.
Features
Water soluble blocks
Biodegradable
Easy to use
Contains odour controlling perfume
Can be handled without danger - environmentally safe
Non-corrosive to all metals and synthetic materials
Benets
Cleans and freshens
Removes obnoxious odours and prevents blocked urinal traps and pipe work
Enhance the biological degradation taking place in sewage treatment systems and collecting tanks
Ordering information
Product number Product name
743179 GAMAZYME BUB 1KG
743161 GAMAZYME BUB 1,8KG
743153 GAMAZYME BUB 3 KG
543
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!!"4&22&"4-&.460%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!!"4&22&"4-&.460%'9*%
93/52$&0"(&
MARINE CHEMICALS
OXYGEN S
SCCAVENG
NGEER P
PLLUS
655 698712
Oxygen Scavenger Plus is a catalysed liquid solution of diethylhydroxylamine (DEHA). Its volatile
properties ensure distribution throughout the boiler and condensate system, and hence protects
against oxygen corrosion in all parts of the system. The product also provides the required conditions
for the establishment of a passivating layer of magnetite on all inner surfaces. Oxygen Scavenger Plus
is a low toxicity product, suitable for high, medium and low pressure boiler systems.
Features
Fast acting, liquid oxygen scavenger
Safe and easy to use, low toxicity
Neutralises acids occurring in condensate system
Volatile product, provides distribution and protection throughout the boiler system
Organic product, no dissolved solids added
Simple test to determine treatment level
Benets
Economical in use
Reduces corrosion of iron and copper, increasing system life and reliability
Ordering information
Product number Product name
698712 OXYGEN SCAVENGER PLUS 25 LTR
546
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
OXYGEN C
CO
ONT
NTR
ROL
655 571315
Oxygen Control is a catalysed liquid hydrazine oxygen scavenger for boiler and steam line corrosion
protection. As an additional benet it will assist to neutralise dissolved carbon dioxide. It provides the
required conditions for the establishment of a passivating layer (magnetite) in the boiler and condensate
system.
Features
Oxygen Control is a liquid product, easy to feed
Fast action due to catalyst
Benets
Does not contribute to conductivity
Protects boiler, steam lines, condensate lines and feed water lines from corrosion
Assists mechanical deaeration
Simple test to determine level of treatment
Ordering information
Product number Product name
571315 OXYGEN CONTROL 25 LTR
547
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
OXYGEN S
SCCAVENG
NGEER 9-
9-0035
655 777705
Features
Catalysed hydrazine product for rapid reaction with dissolved oxygen and prevention of corrosion in marine boilers
Benets
Removes dissolved oxygen from boiler feedwater without increasing dissolved solids, resulting in reduced blowdown
and fuel costs
Maintains a protective surface layer of magnetite on the waterside of boiler metals
Protects steam and condensate lines from aggressive oxygen attack- used in conjunction with Condensate
Treatment
Ordering information
Product number Product name
777705 OXYGEN SCAVENGER 9-035 25 LTR
OXYGEN S
SCCAVENG
NGEER 9-
9-00
002
2
655 777712
Features
Volatile oxygen scavenger in liquid form which does not add dissolved solids to the treated water
Benets
Safe form of hydrazine specically formulated to reduce handling problems associated with hydrazine solutions
Does not require special feeding equipment for safe application
Maintains a protective surface layer of magnetite
Ordering information
Product number Product name
777712 OXYGEN SCAVENGER 9-002 25 LTR
548
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
OXYTREAT
777713
A blend of selected tannins for corrosion protection in low to medium pressure steam boilers
Features
Iron/tannate lm protects metal surface
Benets
Removes oxygen, protecting boiler and steam lines
Low toxicity
Protects feed tank and feed lines
Ordering information
Product number Product name
777713 OXYTREAT 25 LTR (79600)
549
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
CAT S
SUULPHIT
HITEE L ((C
CSL)
655 575662
CSL is a sodium sulphite based product in ready to use liquid form. The catalyst ensures rapid
elimination of oxygen in the boiler system.
Features
Concentrated liquid product
Catalysed product for very rapid action
Reacts at low temperature
Benets
Protects the boiler from oxygen corrosion
Assists with mechanical deaeration
Simple control test
Cat Sulphite L (CSL) should be used in conjunction with remove gases like oxygen. Even so, the feed water contains
other Unitor treatments. It should be dosed seperately from oxygen which can create severe corrosion, shown as deep
other boiler water treatments. Oxygen is highly corrosive in and local pitting. This will quickly cause failure of the boiler
the boiler system, even in small amounts. Elevated metal. CSL reacts with oxygen to form inert sodium
temperature operation of the hotwell is a good practice to sulphate, thus preventing oxygen attack.
Ordering information
Product number Product name
575662 CAT. SULPHITE L 25 LTR
550
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
COND
NDEENS
NSAATE C
COONT
NTRROL
Concentrated liquid neutralising agent for corrosion control in condensate and feed water systems.
Features
Easy to use liquid treatment
Neutralises the acids occurring in the condensate system
Volatilizes and carries over with the steam and so it is recycled
Simple test to determine level of treatment
Used for protection of condensate and feed water systems in boiler systems of all pressures
Benets
Dosage is economical and efcient
Less maintenance required
Lower operating costs and increased reliability
Ordering information
Product number Product name
774828 Condensate Control
551
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
COND
NDEENS
NSAATE T
TRREATME
MENT
NT 9-
9-150
150
655 777702
Condensate Treatment 9-150 is a liquid blend of neutralising amines applied for the protection of steam
and condensate pipework.
Features
Provides effective protection of steam and condensate systems against corrosive attack by carbon dioxide and other
acidic gases
Reduces pickup of iron and copper in condensate as a result of corrosion suppression reliability
Benets
Extends the life of steam and condensate systems giving reducing maintenance costs and less down time
Using Condensate Treatment 9-150 with an oxygen scavenger gives a balanced control programme for increased
plant reliability
Ordering information
Product number Product name
777702 CONDENSATE TREATMENT 9-150 25 LTR
HA
HARRDNE
NESSS T
TRREATME
MENT
NT 7
7208
208
655 777706
Hardness Treatment 7208 is an alkaline liquid phosphate formulation for the prevention of scale in both
high and low pressure boilers. Hardness Treatment 7208 is an alkaline liquid phosphate with a Na:PO4
ratio of 2.6:1 that can be used in both coordinated and residual phosphate boiler water treatment
programmes.
Features
Application can easily be automated using Naltrak automation equipment
Simple test kit is available
Benets
Provides phosphate scale control in both high and low pressure boilers
May be used as part of a coordinated phosphate programme
Easy to apply liquid formulation
Ordering information
Product number Product name
777706 HARDNESS TREATMENT 7208 25 LTR
552
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
HA
HARRDNE
NESSS C
COONT
NTRROL
655 571299
Hardness Control is a highly soluble, dry powder product used for the reduction of hardness in boilers.
It will precipitate calcium hardness as a non-adherent sludge.
Features
Highly active phosphate based compound
Easily dissolved in water for dosing
Benets
Scale problems due to calcium are eliminated
Maintains sludge in a non-adherent state for removal by blow down
Simple test to determine level of treatment
Can be used for boilers of all pressures
Unitor Hardness Control does not inuence the alkalinity in the system
Ordering information
Product Number Product name
571299 HARDNESS CONTROL 25 KG
Approvals
Approved by the Norwegian National Institute of the Public
Health for the use in system where steam is used for
drinking water production
553
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
ALKALINIT
INITYYC
COONT
NTRROL
655 571307
Concentrated liquid alkaline product for corrosion and scale control in boilers.
Features
Convenient liquid treatment which provides the basic alkalinity on which successful water treatment depends
Maintains alkalinity within optimum limits
Provides optimum conditions for hardness control to function
Assists in precipitation and blowdown of magnesium and calcium salts
Neutralises acid conditions
Can be used with most treatment chemicals, in conjunction with a coordinated treatment programme
Benets
Allows efciency to be maintained, and reduces maintenance
Will assist in keeping silica in suspension
Simple testing to determine level of treatment
Can be used in boilers of all pressures
Can be used as a neutraliser after acid cleaning operations
Ordering information
Product number Product name
571307 ALKALINITY CONTROL 25 LTR
Approvals
Approved by the Norwegian National Institute of the Public
Health for the use as neutraliser after acid cleaning
operations in fresh water generators
554
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
BWT L
LIQ
IQU
UID P
PLLUS
655 777701
BWT Liquid Plus is a blend of phosphate, alkalinity and polymer dispersants designed for the control of
scaling and corrosion in the boiler. BWT Liquid Plus can be used as a phosphate treatment for low
hardness feed waters in boilers operating at pressures up to 40 bar.
Features
Minimises scale formulation, corrosion and sludge accumulation
Effective iron dispersant
Benets
Simple to control
Complies with FDA regulations
Ordering information
Product number Product name
777701 BWT LIQUID PLUS 25 LTR
555
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
BOIL
ILEER C
COOAGULANT
655 571331
Features
Liquid product, easy to feed
Prevents the formation of adherent deposits and sludges in boilers
Used in conjunction with Wilhelmsen Ships Service Chemical Service's standard range of boiler water treatments
Used to coagulate small amounts of oil which have contaminated the boiler water
Benets
Keeps boilers clean and extends boiler operational time between cleaning
Keeps sludge dispersed for efcient removal by blowdown
Ordering information
Product number Product name
571331 BOILER COAGULANT 25 LTR
556
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
AUTOTREAT 25
655 698720
Autotreat is an advanced liquid boiler water treatment chemical formulated with alkaline compounds,
scale and corrosion inhibitors, volatile amines for protection of condensate system, and sludge
conditioner. The product combines well known phospate treatment with new polymer technology. This
ensures that precipitates are kept soft and nonadherent for easy removal by blowdown.
Features
Liquid boiler water treatment chemical for simplied dosing and handling
Suitable for all boilers, up to 30 bar pressure
Contains volatile amines to neutralise acids occurring in condensate system
Benets
Prevents scaling and corrosion, increasing system life and reliability
Dispersant action suspends sludge and sediment particles for efcient removal by blowdown
Keeps boiler tube surfaces clean, promoting the best heat transfer conditions
Simple testing to determine treatment level
Ordering information
Product Number Product name
698720 AUTOTREAT - 25 LTR
557
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
MU
MULLTIP
IPLLUS
777709
Multiplus is a multi-functional boiler water treatment formulated to be used in conjunction with Oxytreat
to provide a complete treatment programme for low to medium pressure steam boilers with low
hardness feed-water.
Features
Utilises advanced polymer technology
Contains a neutralising amine for condensate corrosion control
Easy to apply and control
Benets
Minimises scale-formation, corrosion and sludge accumulation
Effective iron dispersant
Ordering information
Product number Product name
777709 MULTIPLUS 25 LTR (79601)
558
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
LIQ
IQUUIT
ITRREAT
655 571273
Liquitreat is a liquid blend of alkaline compounds, scale and corrosion inhibitors, oxygen scavenger and
sludge conditioner.
Features
Liquid multi-functional treatment for simplied dosing and handling
Suitable for use with auxiliary boilers and waste heat units
Contains sulphite oxygen scavenger
Benets
Combined with good control of feed water temperature will ensure effective oxygen removal
Heating surfaces are maintained at optimum thermal efciency
Smoke and water tube boilers maintained at peak level efciency; up to 18 bar pressure
Ordering information
Product number Product name
571273 LIQUITREAT 25 LTR
Approvals
Approved by the Norwegian National Institute of the Public
Health for the use in systems where steam is used for
drinking water production
559
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Boiler Water Treatment
COMB
MBIT
ITR
REAT
655 571265
Combitreat is a dry powder containing alkalinity builders, phosphates and sludge conditioners.
Features
Combined conditioning treatment for simplied dosing and handling
Suitable for use with all auxiliary boilers, waste heat units, economisers, package boilers, smoke and water tube
boilers, up to 16 bar pressure
Dispersant action suspends sludge and sediment particles
Benets
Boiler kept at peak level efciency
Heating surfaces maintained at optimum thermal conditions
Ordering information
Product number Product name
571265 COMBITREAT 25 KG
Approvals
Approved by the Norwegian National Institute of the Public
Health for the use in system where steam is used for
drinking water production
560
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Cooling Water Treatment
ANT
NTIF
IFO
OULANT 9-
9-321
321
653 777700
Antifoulant 9-321 has been developed for the control of fouling by shellsh, micro-organisms and
fungal growth in marine seawater cooling systems.
Features
Very effective for the control of mussels, micro-organisms and biological growths in sea water cooling systems
Benets
No danger to marine life when used as recommended
Ordering information
Product number Product name
777700 ANTIFOULANT 9-321 25 LTR
Approvals
Approved by the UK Department of Trade for use in Approved by the Norwegian Institute for Public
systems where water is drawn from that system for Hygiene and health for the same application
the production of potable water by evaporators
561
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Cooling Water Treatment
ROCOR NB L
LIQ
IQU
UID
653 571356
Rocor NB Liquid is a liquid, nitrite/borate based compound with organic corrosion inhibitors for use in
closed cooling water systems.
Features
Liquid product, easy to use
By forming an oxide lm on the metal surfaces electrolytic corrosion is prevented
Benets
Effective against cavitation and erosion
Compatible with hoses, gaskets and seals
Compatible with glycol used for frost protection
Simple control tests
The product can be used for corrosion inhibition in many Centralised cooling systems
types of closed recirculation systems such as: Hot water heating systems
Auxiliary machinery cooling systems
Diesel engine cooling water systems
Compressor cooling water systems
Ordering information
Product number Product name
571356 ROCOR NB LIQUID 25 LTR
Approvals
Approved by major diesel engine manufacturers Approved by the Norwegian National Institute of
Public Health for the use in systems where cooling
water is used for heating purpose in evaporators
562
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Cooling Water Treatment
ENG
NGINE
INE W
WA
ATER T
TRREATME
MENT
NT 9-
9-108
108
653 777703
A balanced mixture of corrosion inhibitors, specially formulated to give a high nitrite furnish which is
becoming a more frequent requirement for the new generation of high efciency diesel engines.
Features
Contains dispersant for cleaner and more efcient cooling systems
Benets
Does not affect gaskets or hoses
Compatible with anti-freeze solutions
Ordering information
Product number Product name
777703 ENGINE WATER TREATMENT 9-108 25 LTR
Approvals
Approved by major diesel engine manufacturers water is used for distilling sea water for domestic
Approved by the UK Dept. of Transport for use in purposes in evaporators onboard
diesel cooling systems where heat from the cooling
563
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Cooling Water Treatment
NA
NALLFLEET 2000
Naleet 2000 combines lm forming corrosion inhibitors with a scale suppressant in liquid form, for
ease of application. Naleet 2000 is soluble in water. Naleet 2000 does not contain chromates.
Features
Protects all common metals in cooling systems from corrosive attack
Approved by major diesel engine manufacturers
Benets
Minimises sludge and scale deposits
Protects against cavitation erosion
Compatible with anti-freeze solutions
Simple to control and safe to handle
Ordering information
Product Number Product name
777711 Naleet 2000 210ltr
777710 Naleet 2000 25 ltr
Approvals
Approved by major diesel engine manufacturers
564
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Cooling Water Treatment
DIE
IESSELGUARD NB
653 571349
A dry powder, nitrite/borate based compound with organic corrosion inhibitors for use in cooling water
systems.
Features
By creating an oxide lm on the metal surfaces, electrolytic corrosion is prevented
Compatible with non-metals such as hoses, gaskets and seals
The product can be used for corrosion inhibition in many types of closed recirculation systems such as:
Benets
Effective against cavitation and erosion
Compatible with glycol used for frost protection
Simple control tests
Ordering information
Product number Product name
571349 DIESELGUARD NB 25 KG
Approvals
Approved by major diesel engine manufacturers Approved by the Norwegian National Institute of
Public Health for the use in systems where cooling
water is used for heating purpose in evaporators
565
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Cooling Water Treatment
ENG
NGINE
INE W
WA
ATER T
TRREATME
MENT
NT 9-
9-111A
111ALL
653 777704
Engine Water Treatment 9-111AL contains a balanced mixture of corrosion inhibitors in liquid form,
together with an antiscalant. EWT 9-111AL is formulated to protect systems containing aluminium
components.
Features
Protects all metals (including aluminium) in engine cooling systems from corrosion attack
Does not affect gaskets or hoses
Benets
Keeps systems free from sludge and scale deposits
Compatible with antifreeze solutions
Ordering information
Product number Product name
777704 ENGINE WATER TREATMENT AL 9-111 25L
Approvals
Approved by major diesel engine manufacturers UK Department of Trade approved
566
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Cooling Water Treatment
COOLTREAT A
ALL
653 680843
Cooltreat AL is an organic liquid corrosion inhibitor with extended life for use in closed cooling water
systems. This product offers protection for all commonly used materials in engine cooling water
systems, including aluminium. Unlike other coolants, Cooltreat AL does not contain components
subject to rapid depletion i.e. Nitrite and Silicate. Based on aliphatic acid technology Cooltreat AL is
stable and hence the test frequency can be reduced. Cooltreat AL is fully organic and biodegradable.
Features
Liquid product, easy to use
The product can be used for corrosion inhibition in many types of closed re-circulation system such as:
Benets
Environmentally friendly, fully organic product, low toxicity
Compatible with hoses, gaskets and seals
Effective against cavitation and erosion. Superior heat transfer properties
Compatible with glycols for frost protection
Stable product-non depleting
Ordering information
Product number Product name
680843 COOLTREAT AL
Approvals
Approved by major diesel engine manufacturers
567
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Cooling Water Treatment
MA
MARR-71
653 735977
MAR-71 is a very effective biocide, used to prevent and combat microbiological growth in closed
cooling water systems as well as in lubricating oil systems. Bacteria are the cause of many corrosion
problems, as while they grow, they produce a variety of acids and in some cases slimy layers on metal
surfaces which results in reduced heat transfer and corrosion in bearings. Nitrites, Phosphates and
emulsifying oils are good nutrient media for bacteria. MAR-71 has proven to be a very effective
disinfectant. Lower dosages of MAR-71 can also be used to prevent infection.
Features
Kills micro-organisms in closed cooling water systems and lubrication oil systems
HOCNF registered for use in the North Sea Offshore sector, yellow/gold classication
Benets
One product, two different applications
No cases have been reported where bacteria have become immune to MAR-71
Prevents corrosion caused by microarganisms
Biodegradable, does not accumulate in the environment
Ordering information
Product number Product name
735977 MAR-71 BIOCIDE 3X5L NOT IN USA&CAN
568
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Cooling Water Treatment
BIO
IOGGUARD
Bioguard is a very effective, amine based dispersant of marine growth such as algae, shellsh and
micro-organisms to prevent fouling of sea water (cooling) systems. Because of it's lming properties,
the product also acts as a corrosion inhibitor.
Features
Liquid treatment which is easy to use
Extremely effective in the control of sea water fouling organisms
Maintains heat transfer in systems and extends the periods between cleaning
Biodegradable
Suitable for all types of systems using sea water, both static and owing
Benets
Multi-system use
Many applications covered by one product
Reduces maintenance and down time
Economic in use
Ordering information
Product number Product name
777851 Bioguard 25 ltr
Approvals
Approved by the U.K. Department of the Environment
as a marine antifoulant in the inlet of evaporators
producing potable water
569
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
VAPTREAT 25 L
654 571364
A concentrated liquid blend of polymer and antifoam agents for controlling scale and foam in
evaporators.
Features
Ensures that the evaporator works at maximum efciency by keeping heat transfer surfaces free of scale
The antifoaming properties ensure that distillate quality is high as carry over is eliminated
Will gradually remove existing scale when dosed at twice the normal rate
Concentrated, safe liquid, easy and economical dosing
Benets
Reduces downtime and maintenance
Ordering information
Product number Product name
571364 VAPTREAT 25LTR
MA
MAXXI-V
I-VA
AP P
PLLUS
654 777707
Maxi-Vap Plus is a concentrated solution of an organic poly-electrolytes specically developed for the
control of scale deposition in sea water evaporators. It is miscible with water in all proportions.
Features
Maintains design output and efciency of evaporators for extended periods
Improves distillate quality by controlling foaming and carry over
Benets
Reduces downtime and maintenance costs making it economical in use
Ordering information
Product number Product name
777707 MAXI-VAP PLUS 25 LTR
Approvals
Approved by the UK Department of Trade Marine
Safety Agency
570
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
MU
MULLTIV
IVA
AP
654 759340
MultiVap is a concentrated liquid blend of antiscalant and antifoam agents for controlling scale and
foam in seawater evaporators. MultiVap has been formulated for optimum efciency when used in large
evaporators with high distillate production.
Features
Highly concentrated, economical and space saving for large evaporator units
Ensures optimum efciency by keeping heat transfer surfaces clean and free of scale
Benets
Reduces downtime and maintenance
Contains antifoam to give high distillate quality and prevent carry over
Ordering information
Product number Product name
759340 MULTIVAP 25LTR
571
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
EVAPORATOR D
DEEFOAME
MERR
654 638676
Antifoam for Seawater Evaporator. Evaporator defoamer is used in conjunction with Vaptreat
antiscalant when foaming problems occur in the evaporator. Foaming problems can occur with certain
design of evaporators and under certain conditions like elevated sea water temperature. Evaporator
defoamer is used to combat such problems and prevent foaming and carry-over.
Features
NSF listed according to Drinking Water Standard 60
Benets
Compatible with all types of evaporator antiscalant
Easy to dose
Ordering information
Product Number Product name
638676 EVAPORATOR DEFOAMER
572
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
POTABLE W
WA
ATER S
STTABIL
ILIS
ISE
ER L
LIQ
IQU
UID
659 777714
Potable Water Stabiliser Liquid is a combination of polyphosphates, having stabilising properties. The
product effectively and economically provides scale and corrosion control in potable water and other
shipboard once-through water systems.
Features
Prevents Red Water in the ship's potable water systems
Controls corrosion and scaling in pipelines and other equipment handling softened or evaporated water
Benets
Increases system life and reduces maintenance costs
Supplied in convenient to use liquid form
Ordering information
Product number Product name
777714 POTABLE WATER STABILISER LIQUID 25L
573
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
POTABLE W
WA
ATER S
STTABIL
ILIS
ISE
ER
659 624916
Features
Prevents Red Water in potable water systems
Provides scale and corrosion control in hot water heaters, coolers and water tanks
Effective at temperatures up to 60C (140F)
Benets
Increases system life and reduces maintenance costs
Controls corrosion in pipelines and other equipment handling softened or evaporated water
No restrictions on use of the treated water as feed water to boilers or engine cooling systems
Ordering information
Product Number Product name
624916 POTABLE WATER STAB 25 KG
Approvals
Approved by Norwegian National Institute of Public Approved by NSF according to Standard 60
Health as an additive to drinking water.
574
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
RO S
SCCALE C
COONT
NTRROL
659 777716
RO Scale Control is a broad spectrum scale inhibitor for Reverse Osmosis systems. Scaling and iron
fouling of the RO membranes will reduce system performance and lead to premature membrane
replacement. Precipitation of scale and deposits build up on the RO membrane, which leads to poor
permeate quality, low permeate production, unscheduled downtime, increased water consumption and
increased energy costs.
Features
Effective on a broad range of scale forming compounds
Liquid formulation
Benets
Cost effective dose rate
Compatible with a wide range of RO membranes
Ordering information
Product number Product name
777716 RO SCALE CONTROL 25 LTR
RO B
BIS
ISU
ULPHIT
HITEE
659 777852
RO Bisulphite is a solution of sodium hydrogen sulphite used in the preservation of RO membranes and
as a dechlorinating agent.
Features
Suitable for preservation and dechlorination
Benets
Food grade product
Ordering information
Product number Product name
777852 RO Bisulphite
575
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
RO A
ALLKALINE C
CLLEANE
NERR
659 777718
RO Alkaline Cleaner is a membrane cleaner developed to support the cleaning of acid in soluble
sulfates of calcium, barium and strontium as well as calcium uoride.
Features
Mild alkaline formulation
Liquid formulation
Benets
Compatible with wide range of RO membranes
RO Alkaline Cleaner is also effective in removing iron oxides effects of fouling can lead to poor water quality, loss in
and hydroxides as well as calcium carbonate, though RO production, unscheduled downtime and membrane
Mild Acid Cleaner is preferred for these foulants. RO Alkaline replacement. A regular maintenance and cleaning program
Cleaner is highly effective when used in combination with can provide return on investment (ROI) results ranging from
high pH detergent cleaners such as RO Surfactant Cleaner 100 to 250% by maintaining low pump output pressures
to help remove organic substances and microbial slimes. and extending the membrane's life.
Elements should be cleaned whenever the normalized
During normal operation, RO membranes can become
permeate ow rate or salt rejection decreases by 10-15% or
fouled, which greatly reduces the efciency of the system.
the differential pressure increases by 10-15% from the
Deposits build up on the membrane until they cause a
original baseline data.
reduction in permeate ow and loss in salt rejection. The
Ordering information
Product number Product name
777718 RO ALKALINE CLEANER 25 LTR
576
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
RO MIL
MILDDA
AC
CID C
CLLEANE
NERR
659 777715
RO Mild Acid Cleaner is a membrane cleaner specically designed to remove iron fouling. It also is
effective against light calcium carbonate scaling. The efcacy of RO Mild Acid Cleaner can be
enhanced by the addition of RO Alkaline Cleaner to the cleaning solution although some minor pH
correction may be necessary.
Features
Mild acid formulation
Liquid formulation
Benets
Compatible with wide range of RO membranes
Ordering information
Product number Product name
777715 RO MILD ACID CLEANER 25 LTR
RO S
SUURFACTANT C
CLLEANE
NERR
659 777201
RO Surfactant Cleaner has been developed for the cleaning of reverse osmosis (RO), nano-ltration
(NF) and ultra-ltration (UF) membranes. RO Surfactant Cleaner is a formulation based on an anionic
surfactant and is highly effective in removing colloidal and other organic matter.
Features
Effective surfactant formulation
Liquid formulation
Benets
Compatible with wide range of RO membranes
Ordering information
Product number Product name
777201 RO SURFACTANT CLEANER 25 LTR
577
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
BALLAST T
TA
ANK INHIB
INHIBIT
ITO
OR 9-
9-9933
652 777013
Ballast Tank Inhibitor 9-933 is a liquid lm-forming corrosion inhibitor. It is a blend of organic and
inorganic inhibitors and it contains no chromates and is completely soluble in sea water.
Features
Effective for use in ballast tanks, cofferdams, barges and voids
Forms tightly bonded protective lm on all metal surfaces below water level
Benets
Protective lm is stable over a wide pH and temperature range
Formulated to give reduced pollution problems if accidentally discharged to sea
Ideally suited for ballast and other tank protection during ship lay-up periods
Ordering information
Product number Product name
777013 BALLAST TANK INHIBITOR 9-933 25 L
AQUABROME T
TA
ABLETS
657 720243
A highly compacted 20 gram bromine tablet suitable for use in a brominator. Slow dissolving and ideal
for continuous dosage programmes.
Features
Slow dissolving tablet
Bromine based disinfectant
Benets
Totally soluble
Effective at wide range of temperatures
Easy to apply
Ordering information
Product number Product name
720243 AQUABROME TABLETS 2X5KG
578
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
POOL C
CLLARIF
IFIE
IER
R
657 766539
Highly concentrated product based on specially formulated polymers that quickly clears cloudy water.
Features
Concentrated formula
Contains specially formulated polymers
Easy to use - no premixing
Does not affect pH
Benets
Clears cloudy water quickly
Helps reduce chlorine usage
Makes water sparkle
Pool Clarier restores sparkling clear water by binding small requires no premixing, contains no alum and does not affect
particles into larger masses that can be easily removed by the pH.
the lter. This product works while the lter is in operation,
Ordering information
Product number Product name
766539 POOL CLARIFIER 1LTR
579
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
POOL S
SUURFACE C
CLLEANE
NERR
657 766436
For removal of scum (bath tub ring) along the water line. Quickly eliminates oils, greases, light scale and
fresh stains.
Features
For pools, spas and hot tubs
Prevents staining and controls scale build-up
Removes oils, grease and other deposits from pool surfaces
Cleans and maintains pool surfaces
This product removes most stubborn scale, grease and steel, aluminium and painted surfaces.
common dirt. Clings to vertical surfaces for easy cleaning. Unlike many cleaners, Pool Surface Cleaner is completely
May be used on plastic, vinyl, breglass, ceramic, stainless compatible with swimming pool water.
Ordering information
Product number Product name
766436 POOL SURFACE CLEANER 1LTR
580
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
POOL A
AND
ND S
SPPA HA
HARRDNE
NESSS
657 766538
Raises calcium hardness of pool and spa water to assist in the prevention of corrosion, etched plaster
and other problems resulting from low calcium levels.
Features
For Pool, spas and hot tubs
Raises calcium hardness level
Helps prevent etching and staining
100% active
Benets
Multi-use product
This product is used to raise the calcium hardness in pool hardness will become more abrasive and uncomfortable for
water. Low calcium hardness may cause pool water to be bathers. Rough surfaces also increase problems with algae
corrosive which may result in staining, etching or distorting and makes cleaning more difcult.
of all types of pool surfaces. Surface etching by low calcium
Ordering information
Product number Product name
766538 POOL AND SPA HARDNESS 18KG
581
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
SPA D
DEEFOAME
MERR
657 766540
Eliminates unsightly foam from spa water, hot tubs and other water features by soaps, suntan lotion
and detergents.
Features
Control and prevent foaming
Quickly eliminates foam from spas, hot tubs and other water features
Easy to use
Ordering information
Product number Product name
766540 SPA DEFOAMER
582
MA
MARRINE C
CHE
HEMIC
MICAALS Naleet Water Treatment Chemicals
Water Production Treatment
PH INC
INCRREASER
657 766537
A convenient and safe granular product for raising the pH of pool water with minimal effect on overall
alkalinity.
Features
Convenient granular product
100% active
Safe for all types of pools
Protects pool surfaces and equipment from corrosion due to low pH
Quickly and easily raises pH
Makes water more comfortable for bathers
Benets
Reduces maintenance costs
Used for raising the pH of pool water. by pH being too low or too high. If pH is too low then
Proper pH control is essential to eliminate problems caused corrosion and staining may occur.
Ordering information
Product number Product name
766537 pH INCREASER 25KG
583
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!5&,*,60%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!5&,*,60%'9*%
93/52$&0"(&
MARINE CHEMICALS
BIO
IOCCONT
NTRROL MA
MARR7
711
650 571257
It's essential to have adequate storage for marine fuel. But microorganisms can corrode fuel storage
tanks and systems, leading to clogged lters and nozzles, and degraded fuel. Biocontrol MAR 71 is a
specially designed liquid that protects fuel against micoorganisms.
Features
Kills microorganisms in fuel oil
Keeps lters and nozzles free from clogging
Prevents corrosion in fuel systems and doesn't form any corrosive combustion products
Safe for use on all materials, including metal and synthetic rubber
Benets
You can be sure that Biocontrol MAR 71 will kill all microorganisms. There have been no reported cases of bacteria
becoming immune to this liquid
With lters and nozzles clean and free from bacteria remnants, you can run a trouble free operation
Ordering information
Product number Product name
571257 BIOCONTROL MAR71 25L NOT IN USA&CAN
586
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Distillate Fuel Treatment
DIE
IESSEL F
FUUEL L
LUUBRIC
ICIT
ITY
Y IMP
IMPRROVER
650 777195
Diesel Fuel Lubricity Improver is formulated to enhance the lubricity of diesel fuels. It has been found to
be particularly effective in ultra low sulphurdiesel fuels and gas oils that are blended to meet
governmental regulations on fuel sulphur content.
Features
Improves the lubricity of low sulphur diesel fuels
Can be used as a stand-alone product or component in diesel packages
It provides excellent performance as a lubricity improver component in diesel detergent packages and does not
affect the water emulsication tendency of a fuel as measured by ASTMD-1094.
Effective at 50-150 ppm range in meeting the HFRR requirement for lubricity specications
Does not interact with the fuel
Benets
Protects your engine from wear so you can avoid unscheduled and expensive maintenance
Quality is ensured so you can rest easy with good engine protection
You can safely use the product in all types of fuels
Ordering information
Product number Product name
777195 DIESEL FUEL LUBRICITY IMPROVER 25 L
587
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Distillate Fuel Treatment
DIE
IESSEL F
FUUEL S
STTABIL
ILIS
ISE
ER
650 777190
Diesel Fuel Stabiliser is a multifunctional distillate fuel oil additive. It is used to improve lubricity, as well
as help maintain colour and stability to control the formation of organic sludge and to inhibit corrosion.
Diesel Fuel Stabiliser also disperses accumulated deposits, and reduces lter clogging, injector
sticking, and corrosion of bunkers and fuel lines.
Features
Improves fuel lubricity
Reduces wear of fuel pumps and fuel injection equipment
Proven by independent tests HFRR and Bosch
Benets
Maintains long term storage and thermal stability of marine distillate fuels
Protects against corrosion
Protects against fuel injection fouling and fuel lter plugging
Ordering information
Product number Product name
777190 DIESEL FUEL STABILISER 25 LTR
Accessories
Product number Product name
571257 BIOCONTROL MAR71 25L NOT IN USA&CAN
588
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Heavy Fuel Oil Treatment
FUELCARE
Fuelcare is a pre-combustion conditioning treatment for residual fuel oils. Fuelcare prevents and
disperses sludge, stops stratication of fuel in tanks, breaks water-in-oil emulsions and gives a better
separation of water and sediments from oil.
Features
Disperses and prevents sludge formation, keeping fuel systems cleaner
Stabilises fuel blends, reducing compatibility problems
Fuel acids are neutralised
Demulsies water from fuel and improves centrifugal separation
Can be used as a cleaner for pre-heaters, burner tips, fuel lters, etc
Benets
Reduces corrosion in tanks and fuel lines
Prevents lter blockage and improves injector spray pattern
Limits sludge and tank bottom deposits, maintains a cleaner fuel system
Fuel system components have longer working life and less down-time
It provides a more homogeneous fuel for combustion. separation is made more efcient and all system
Vessels bunker lines remain cleaner and lter blockages are components stay cleaner.
reduced or prevented. Centrifugal water and contaminant
Ordering information
Product number Product name
766154 FUELCARE 25 LTR
766162 FUELCARE 210 LTR
589
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Heavy Fuel Oil Treatment
GAMA
MABBREAK
650 767113
Gamabreak rapidly breaks water-in-oil emulsions in all grades of fuel. It assists water removal in the
settling tank and fuel centrifuges.
Features
Rapidly breaks water-in-oil emulsions
Improves separator efciency
Prevents sludge formation in tanks and lines
Benets
Helps you to keep your fuel as water free as possible
Reduction in sludge reduces your maintenance requirements
Gamabreak breaks water-in-oil emulsions by lowering the homogenising action of Gamabreak keeps heavy fuel
surface tension between the two phases. It is insoluble in particles in suspension, therefore fuel lters block less
water and remains effective even after the water has been frequently, tanks and lines remain cleaner, and in general,
removed. Powerful dispersants combat existing sludge fuel systems maintenance is minimised. Consequently, a
formations while homogenising the fuel to prevent new greater proportion of supplied fuel is available for
sludge from being formed. Centrifugal separation of catalyst combustion.
nes is improved, reducing abrasion damage. The
Ordering information
Product number Product name
767113 GAMABREAK 25 LTR
590
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Heavy Fuel Oil Treatment
DUAL P
PUURPOSE P
PLLUS
Dual Purpose Plus is a concentrated combustion improver for heavy fuel oils. It also has fuel
conditioning properties.
The catalysts in Dual Purpose Plus react with heavy fuel particles during combustion. Anti-
polymerisation agents inhibit sludge formation, while dispersants stabilise the fuel.
Features
Improves combustion
Reduces carbon/ash deposits
Limits soot formation and smoke emissions
Benets
Overall improvement in fuel combustion and economy
Minimises cold-end corrosion of exhaust trunking, uptakes, cylinder liners, valve stems, etc
The fuel ignition temperature is reduced, resulting in Sulphuric acid corrosion caused by condensing exhaust
increased combustion efciency with less carbon left to form gases may be seen in any of the cooler parts of the boiler or
smoke and soot. Engine and exhaust systems are kept engine system. Typical problem areas are cylinder liners
cleaner with longer service life and less maintenance. (clover-leaf corrosion), valve stems and funnel uptakes. Dual
Purpose Plus catalytically inhibits the formation of acid
Anti-polymerisation agents inhibit sludge formation, while
gases. This reduces the amount of acid present, thereby
dispersants stabilise the fuel. This results in a cleaner fuel
reducing acid corrosion.
system and better fuel ow, giving improved fuel atomisation
and greater combustion efciency.
Ordering information
Product number Product name
571166 DUAL PURPOSE PLUS 25 LTR
571182 DUAL PURPOSE PLUS 210 LTR
591
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Heavy Fuel Oil Treatment
BURNA
NAID
ID
650 767566
Burnaid is a concentrated organic combustion improver. It contains no metals and can be used in
diesel engines and boilers. The organic compounds in Burnaid promote improved combustion by
reacting with fuel particles, thus lowering ignition temperatures.
Features
Improves combustion
Reduces carbon deposits
Limits soot formation
Limits smoke emissions
Benets
Contains no metals
Improves boiler efciency
The organic compounds in Burnaid promote improved kept cleaner. Sludge formation is inhibited through the action
combustion by reacting with fuel particles, thus lowering of anti-polymerization agents. Fuel stability is improved
ignition temperatures. The result is less carbon deposits, through the action of solvents and dispersants. The results
soot and smoke. Engine and boiler combustion surfaces are are improved combustion efciency and fuel atomization.
Ordering information
Product number Product name
767566 BURNAID 25 LTR
592
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Heavy Fuel Oil Treatment
DIE
IESSELIT
ITEE
650 767112
Dieselite is a multi-functional fuel treatment containing combustion catalysts and ash modiers. It is
intended for use in diesel engines and boilers burning residual fuels.
Features
Reduces smoke, soot and carbon deposits
Raises the melting point of sodium vanadium fuel ash to reduce high temperature corrosion and ash deposits
Cold-end corrosion reduced by inhibiting acid ue gas
Benets
Extends service life of your engine components
Keeps your engine in good performance by reducing soot and unburned carbon
Carbon residue formation during combustion is inhibited by service life. The majority of ash formed is ejected with the
catalysts that lower the ignition temperature of heavy exhaust gases in a ne, solid state, and any ash remaining in
asphaltenic particles. The combustion time is consequently the exhaust system is easily removed by light brushing.
increased, leading to a reduction of tar deposits and The conversion of fuel sulphur to potentially corrosive
carbonaceous rescale. sulphur trioxide gas is also inhibited. Sulphur trioxide reacts
Ash modiers combine with fuel combustion ash to raise the with condensed steam in the exhaust trunking, funnel
sinter and melting points of the ash above the engine or uptakes and other cooler zones to form sulphuric acid.
boiler normal operating temperatures. High temperature Dieselite is a wide spectrum additive intended for continuous
corrosion is minimised, reducing maintenance and extending use.
Ordering information
Product number Product name
767112 DIESELITE 25 LTR
593
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Heavy Fuel Oil Treatment
VALVECARE
650 769091
Valvecare is specically intended for treatment and reduction of corrosive deposits formed on exhaust
valve seats and turbocharger components.
Features
Raises the melting point of sodium vanadium ash and reduces high temperature corrosion and guttering
Keeps exhaust valves and turbochargers clean
Reduces the amount of ash deposits throughout the exhaust system
Benets
Extends service life of exhaust valves and extends the service interval for water or granulate washing of turbocharger
blades
Valvecare has been specially formulated to combat exhaust valve burning and erosion problems associated with
sodium and vanadium contamination of poor quality heavy residual fuels
Valvecare physically modies fuel ash, raising the sinter and is formed is friable and easily removed by conventional
melting points of the ash above the normal engine operating methods such as brushing.
temperatures. Modied ash particles are solid, small and Another advantage found with Valvecare is acid reduction.
non-adhesive and are ejected with the exhaust gas stream. Vanadium in the fuel has a catalytic action, increasing the
Valve seatings remain intact as ash deposits on valve seats conversion from sulphur dioxide to sulphur trioxide during
are reduced. Guttering is minimised and valve cone and seat combustion. The sulphur trioxide then reacts with steam in
lives are extended, allowing for greater time between the exhaust system, increasing the dew point to form
overhauls. Turbocharger and exhaust system fouling is sulphuric acid. Valvecare keeps the complex vanadium and
controlled as the ash particles in the gas stream are less sodium ash compounds in a solid, non-molten state,
adhesive. Exhaust systems remain cleaner and any ash that inhibiting fused salt corrosion.
Ordering information
Product number Product name
769091 VALVECARE 25 LTR
594
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Heavy Fuel Oil Treatment
SOOT R
REEMO
MOV
VER
650 571240
Soot Remover is a dry powder compound formulated for safe removal of soot and deposits from
boilers and diesel engine exhaust systems.
Features
Reduces soot and slag deposits
Reduces cold-end corrosion
Assists soot blowing
Benets
Saves you money by improving heat transfer
Saves you money by increasing boiler efciency
If deposits are allowed to form on heat exchangers, the loss temperature of the soot/deposit is reduced to less than
of efciency can be directly related to extra fuel 280C. The carbon deposits are thus ignited, leaving an
consumption. A 1 mm deposit is approximately equivalent to easily removed ash.
a 10% efciency loss, a 3 mm deposit can reduce efciency The use of Soot Remover not only provides greater fuel
by up to 50%. The normal ignition temperature of soot is efciency, but also prevents acid formation in areas where
around 600C. This means that it is burned only in the severe corrosion could result in expensive damage, i.e. heat
hottest parts of the boiler or diesel exhaust systems. Due to exchangers, superheaters, economisers, exhaust paths/
the catalytic action of Soot Remover, the ignition stacks.
Ordering information
Product number Product name
571240 SOOT REMOVER 25 KG
Accessories
Product number Product name
572073 FIXED INJECTOR
572065 PORTABLE SOOT INJECTOR
595
MA
MARRINE C
CHE
HEMIC
MICAALS Unitor Fuel Oil Chemicals
Heavy Fuel Oil Treatment
SOOT R
REEMO
MOV
VER L
LIQ
IQU
UID
650 624627
Soot Remover Liquid is formulated for effective prevention of soot and rescale deposits from boilers
and diesel engine exhaust systems.
Features
For the prevention of soot and rescale deposits in diesel engine and boiler exhaust systems
For reduction of cold-end corrosion where surface temperatures are lower than the dew point of the exhaust gases
Aids soot blowing
Benets
Saves you cleaning time by reducing soot and slag deposit
Reduced cold-end corrosion reduces your meed for maintenance
Saves you money by improving heat transfer and boiler efciency
If rescale is allowed to form on heat exchangers, the loss of of Soot Remover Liquid, the ignition temperature of the soot/
efciency can be directly related to extra fuel consumption. A rescale is reduced to less than 250C. The carbon deposits
1 mm deposit is approximately equivalent to a 10% are thus ignited, leaving an easily removable ash.
efciency loss, a 3 mm deposit can reduce efciency by up The use of Soot Remover Liquid not only provides greater
to 50%. fuel efciency, but also prevents acid formation in areas
The normal ignition temperature of soot is around 600C. where severe corrosion could result in expensive damage,
This means that it is burned only in the hottest parts of the i.e. heat exchangers, superheaters, economisers, exhaust
boiler or diesel exhaust systems. Due to the catalytic action paths/stacks.
Ordering information
Product number Product name
624627 SOOT REMOVER LIQUID 25 LTR
Accessories
Product number Product name
767926 AUT .DOSING UNIT FOR SOOT REMOVER L
625194 MANUAL DOSING UNIT F/SRL
596
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!&34*4315*060%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!&34*4315*060%'9*%
93/52$&0"(&
marine chemicals
NA
NALLTRAK 1000 C
CWWT D
DOOSING S
SY
YSTEM
664 777735
Features
Continuous monitoring with automatic activation of chemical feed for assured system protection
Onboard alarm feature to indicate potential contamination with sea water
Low level alarm to indicate when chemical drum requires replacement
Minimises the requirement for routine wet testing by ships staff
Rugged, stainless steel construction for reliable operation in ship board environment
Benets
"Closed" dosing system improves health and safety by eliminating manual handling of chemicals
Ordering information
Product number Product name
777735 NALTRAK 1000 CWT DOSING SYSTEM
600
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Dosing Equipment
NA
NALLTRAK 17
1750
50 B
BWWT D
DOOSING S
SY
YSTEM
664 777736
Features
Timer controlled dosing
Low level alarm to indicate when chemical drum
requires replacement
Rugged, stainless steel construction for reliable
operation in shipboard environment
Ordering information
Product number Product name
777736 Naltrak 1750, 2 dosing pumps
777737 Naltrak 1750, 3 dosing pumps
601
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Dosing Equipment
NA
NALLTRAK 2000 B
BWWT D
DOOSING S
SY
YSTEM
664 777741
Features
Continuous monitoring of boiler feed water ow and
temperature
Chemical dosing in proportion to feed water ow and
temperature
Robust construction
Benets
Improved healh and safety by eliminating chemical handling
Ordering information
Product number Description
777738 2 dosing pumps, Magphant ow meter and temp control
777739 3 dosing pumps, Magphant ow meter and temp control
777740 2 dosing pumps, ow signal and temp control
777741 3 dosing pumps, ow signal and temp control
602
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Dosing Equipment
DOSING U
UNIT
NIT F
FOOR E
EVVAPORATOR T
TRREATME
MENT
NT
664 656207
Features
Compact unit with 60 litre storage tank
Adjustable ow meter for dosage control
Benets
Improves dosing control through continuous dosing
Reduced requirement for crew handling of the
products
Ordering information
Product number Product name
656207 EVAPORATOR DOSING UNIT
603
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Dosing Equipment
DOSING U
UNIT
NIT F
FOOR B
BWWT
Features
Compact unit with 60 litre storage tank
Electrical Metering Pump with available voltage 100 -
240 V
Benets
Improves dosing control through continuous dosing
Reduced requirement for crew handling of the products
Ordering information
Product number Product name
767922 DOSING UNIT FOR BWT 16 BAR
767923 DOSING UNIT FOR BWT 25 BAR
Accessories
Product number Product name
683771 ALARM KIT FOR BETA PUMP
773184 SPARE DOSING PUMP FOR BWD 16 BAR
773192 SPARE DOSING PUMP FOR BWD 25 BAR
683706 SPARE KIT BETABOILER PUMP
604
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Dosing Equipment
SEA W
WA
ATER D
DOOSING U
UNIT
NIT
664 767925
Features
Compact unit with 60 litre storage tank
Electrical metering pump with available voltage 100 -
240 V
Benets
Improves dosing control through continuous dosing
Reduced requirement for crew handling of the products
Ordering information
Product number Product name
767925 SEA WATER DOSING STATION
Accessories
Product number Product name
773226 SPARE DOSING PUMP FOR SWD
683714 SPARES KIT BETA SEAW.PUMP
605
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
SPECTRAPAK 309
661 739466
Test recommended to maintain cooling water within the Treatment ensures that this pH range is observed when the
prescribed limits. nitrite level is sufciently maintained to prevent corrosion.
Nitrite - Recommended Limits 700-2400 ppm as NO2. The Chlorides - Recommended limit max. 50 ppm. The chloride
nitrite concentration should be maintained within the above value of the cooling water should be kept as low as possible,
recommended limits to effectively inhibit any corrosive or any increase in value whether sudden or gradual, will be an
scaling action within a closed cooling system. Too high a indication of sea water contamination. Check with engine
concentration should be avoided to minimize the cost to manufacturer for other specied limits. If the chloride level
maintain the system. Insufcient dosage can set up a exceeds 50 ppm, the possibility of corrosion in the system
condition where accelerated corrosion can occur in areas increases because chlorides have a negative effect on the
which become unprotected. passivation lm created by nitrites. Therefore, until corrective
action has succeeded in bringing the chloride level back
pH - Recommended Limits 8.3-10. The effectiveness of a
down below 50 ppm, the nitrite level should be kept close to
corrosion inhibitor is restricted to within a certain pH range.
the upper limit (2400 ppm).
Ordering information
Product number Product name
739466 SPECTRAPAK 309
Accessories
Product number Product name
Consumables:
739458 CHLORIDE TEST TABLETS
555623 NITRITE NO.1 TABLETS
555631 NITRITE NO.2 TABLETS
555698 PH PAPER F/ 309 TEST KIT
Spares
555714 SHAKER TUBE 309 TEST KIT
606
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
SPECTRAPAK 310
661 739474
Test recommended to maintain boiler water within the B. Chlorides - 200 ppm maximum as Cl-.
desired level of quality when treating with Liquitreat/ C. Condensate pH 8.3-9.0
Combitreat are as follows: D. Hotwell temperature > 80C
A. p-Alkalinity - Recommended Limits: 100-300 ppm as
CaCO3
Ordering information
Product number Product name
739474 SPECTRAPAK 310
Accessories
Product Number Product name
Consumables:
739458 CHLORIDE TEST TABLETS
555664 P-ALKALINITY TABLETS
555706 PH PAPER + PH REAGENT
Spare parts available for purchase:
555557 SAMPLE BOTTLES 250ML
607
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
SPECTRAPAK 311
661 739482
Accessories
Product number Product name
Consumables:
739458 CHLORIDE TEST TABLETS
555730 FILTER PAPER
555680 HYDRAZINE TEST POWDER
555599 MOULDED CELLS 10ML + CAPS (5 PACK)
555664 P-ALKALINITY TABLETS
555706 PH PAPER + PH REAGENT
555649 PHOSPHATE TABLETS
Spare parts available for purchase:
555581 HYDRAZINE DISC 3/126
555565 LOVIBOND 2000 COMPARATOR
555573 PHOSPHATE DISC 3/70
555557 SAMPLE BOTTLES 250ML
Accessories:
555490 SPECTRAPAK 312
698746 SPECTRAPAK 313
574913 SULPHITE TEST KIT
608
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
SPECTRAPAK 312
661 555490
Features
Compact, portable test kit
Test method included in the kit
Hydrazine reacts with oxygen, acting as a scavenger. The as a protective layer against further corrosion. This test must
reaction results in nitrogen and water with no solids being be performed below 21C. A cooling coil should be tted at
added to the boiler system. Some of the hydrazine will carry the sampling point or the sample should be cooled
over with the steam, aiding in maintaining the condensate immediately under cold running water. Cloudy samples
pH in an alkaline range, which thereby helps combat acid should be ltered before testing.
formation. Hydrazine will also form magnetite which will act
Ordering information
Product number Product name
555490 SPECTRAPAK 312
Accessories
Product number Product name
555680 Hydrazine Reagent
555581 Hydrazine Disc 3/126
609
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
SPECTRAPAK 313
661 698746
Features
Compact, portable test kit
Test method included in the kit.
Controlling dissolved oxygen in boiler feed water and boiler toxicity oxygen scavenger that is distributed throughout the
water is important to avoid pitting corrosion in boiler boiler system. Dosage level of Oxygen Scavenger Plus is
systems. Oxygen Scavenger Plus contains DEHA, a low based on the DEHA value of the condensate water.
Ordering information
Product number Product name
698746 SPECTRAPAK 313
Accessories
Product number Product name
Consumables:
698761 DEHA TEST SOLUTION
698753 DEHA TEST TABLETS
Spare parts available for purchase:
698928 DEHA DISC 3/170
610
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
SPECTRAPAK 315
661 739490
Compact portable boiler water test kit. Please note that 312 for Hydrazine. Spectrapak 313 for DEHA and Sulphite
oxygen scavenger testing is provided separately (Spectrapak test kit for Sulphite).
Ordering information
Product number Product name
739490 SPECTRAPAK 315
Accessories
Product number Product name
Consumables
739458 CHLORIDE TEST TABLETS
555730 FILTER PAPER
555664 P-ALKALINITY TABLETS
555706 PH PAPER + PH REAGENT
Spare parts available for purchase:
568717 BEAKER 100ML AZLON
573048 FUNNEL
555565 LOVIBOND 2000 COMPARATOR
555599 MOULDED CELLS 10ML + CAPS (5 PACK)
555557 SAMPLE BOTTLES 250ML
573055 STIRRING RODS PLASTIC
Accessories:
555490 SPECTRAPAK 312
698746 SPECTRAPAK 313
574913 SULPHITE TEST KIT
611
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
MO
MOT
TOR S
SHIP
HIP T
TEEST K
KIT
IT
661 777066
Benets
Compact and portable
Suitable for LP boilers and engine cooling waters
Ordering information
Product number Product name
777066 Motor Ship Test Kit
Accessories
Product number Product description
777124 P Alkalinity Indicator MPA1 (2x65ML)
777125 P Alkalinity Titrant MPA3 (2x65ml)
777050 Chloride Indicator MBC (2x65ml)
777051 Chloride Titrant MBC2 (2x65ml)
777121 Nitrite Indicator MN1 (2x65ml)
777122 Nitrite Titrant MN2 (2x65ml)
777049 Plastic syringe 2ml
777093 Plastic lter syringe 20ml
777094 Filter paper holder
777095 GFC Filter papers
778113 Titration Jar 40ml
612
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
BOIL
ILEER P
PLLUS T
TEEST K
KIT
IT MO
MO380
380
661 777100
Features
Compact and portable
Suitable for LP boilers using tannin for corrosion
protection and engine cooling waters utilising a nitrite
based corrosion inhibitor
Accessories
Product number Product Description
777124 P Alkalinity Indicator MPA1 (2x65ML)
777125 P Alkalinity Titrant MPA3 (2x65ml)
777050 Chloride Indicator MBC (2x65ml)
777051 Chloride Titrant MBC2 (2x65ml)
777121 Nitrite Indicator MN1 (2x65ml)
777122 Nitrite Titrant MN2 (2x65ml)
777049 Plastic syringe 2ml
777093 Plastic lter syringe 20ml
777094 Filter paper holder
777095 GFC Filter papers
778113 Titration Jar 40ml
777987 Universal pH Indicator Solution
777988 Universal pH Chart
777101 Tannin Indicator Powder MTN1 2x50g
777102 Tannin Titrant MTN2 2x 56ml
613
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
SULPHIT
HITEED
DRROP T
TEEST
661 777126
Accessories
Product number Product name
777126 Sulphite Indicator Tablets 2 packs
777127 Sulphite Titrant 2x65ml
778113 Titration jar 40ml
614
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
NIT
NITRRIT
ITEEF
FUULL K
KIT
IT MO
MO2248A
661 777067
Ordering information
Product number Product name
777067 NITRITE FULL KIT MO248A.
Accessories
Product number Product name
777121 Nitrite Indicator (MN1 x 2 65ml)
777122 Nitrite Titrant (MN2 x 2 65ml)
778113 Graduated Titrator Jar (40ml)
777093 Plastic syringe (20ml)
615
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
PH T
TEEST S
STTRIP
IPSS2P
PA
ACK MO
MO319
319
661 777068
Features
Rapid dip and compare method
Popular choice for applications where speed and
simplicity are important.
Ordering information
Product number Product name
777068 PH TEST STRIPS 2 PACK MO319.
TOTAL HA
HARRDNE
NESSS T
TIT
ITR
RATIO
IONNP
PA
ACK M204
661 777052
Ordering information
Product number Product name
777052 Total Hardness Titration Pack M204
Accessories
Supplied with:
N/50 EDTA Solution 2x250mls
Ammonia Buffer Solution 1x250mls
Total Hardness Indicator Tablets 2x200
Dropper bottle for Ammonia Bubber Solution 1x65ml
616
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
ALKALINIT
INITYYT
TIT
ITR
RATIO
IONNP
PA
ACK M250
661 777055
Ordering information
Product number Product name
77705 Alkalinity Titration Pack M250
Accessories
Supplied with:
N/50 Sulphuric Acid Solution 4x250mls
Phelolphthalein Indicator 2x65ml
CHL
HLO
ORID
IDEET
TIT
ITR
RATIO
IONNP
PA
ACK M251
661 777056
Ordering information
Product number Product name
777056 Chloride Titration Pack M251
Accessories
Supplied with:
Silver Nitrate Chempac 4x250mls
Potasium Chromate Indcator 2x65ml
617
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
TIT
ITRRATIO
IONNA
APPPARATUS P
PA
ACK NO 1 MO
MO217
217
661 777063
Ordering information
Product number Product name
777063 TITRATION.APPARATUS PACK NO 1 MO217
Accessories
Supplied with:
Automatic Burettes 3x10ml
Amber Galll Auto Burette 1x10ml
Burette Valves 1 pack
Stirring Rods 2x150mm
Polythene resevoir 1x250ml
TIT
ITRRATIO
IONNA
APPPARATUS P
PA
ACK NO 2 MO
MO218
218
661 777064
Ordering information
Product number Product name
777064 TITRATION APARATUS PACK No. 2 MO218
Accessories
Supplied with:
Plastic Measuring Cylinders 2x25ml
Plastic Measuring Cylinders 1x50ml
Plastic Measuring Cylinder 1x100ml
Graduated Pipette 1x10ml
Stirring Rods 2x150mm
Porcelain Casserole 2x175ml
Filter Funnel 1x90ml
618
FIL
ILT
TER P
PA
ACK, 1 C
CAARDBOARD B
BOOX MO
MO213
213
661 777062
Ordering information
Product number Product name
777062 Filter Pack 1 MO213
Accessories
Supplied with:
5 Boxes Whatman Filter Papers No. 1 15cm diam.
1 Box Whatman Filter Papers No. 6 15cm diam.
ECOSCAN P
PH6
H6 ME
METTER & E
ELLECTRODE MO
MO348
348
661 777080
Features
Automatic Temperature Compensation (ATC) for the
highest accuracy under uctuating temperatures
Hold Function momentarily freezes reading for easy
viewing and recording
Auto-Power Off saves battery power after non-use
Large Custom LCD provides optimum viewing even at a distance
Protective rubber boot shields from accidental knocks has a sturdy built-in stand for easy bench-top operation
Ordering information
Product number Product name
777080 Ecoscan pH Meter
Accessories
Product number Product name
777098 Spare pH eletrode and lead
777152 Spare Temperature probe and lead
777087 pH7 Buffer Solution 125ml
777088 pH10 Buffer Solution 125ml
619
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
ECOSCAN C
CO
OND
NDU
UCTIV
IVIT
ITY
Y ME
METTER MO
MO34
347
7
661 777079
Features
Multi-point push-button calibration (up to 5 points)
with 1% full scale accuracy
Automatic or manual calibration - for quick, easy
calibration; use automatic mode with preset
calibration points at most popular values or manually
set values in the manual mode for more exibility
Automatic temperature compensation (ATC) for the optimum accuracy under uctuating temperatures
Hold function momentarily freezes reading for easy viewing
Auto-power off saves battery power after non-use
Protective rubber boot shields meter from drops and features a sturdy built-in stand for easy bench-top operation
Ordering information
Product number Product name
777079 Ecoscan Conductivity Meter
Accessories
Product number Product name
777091 Spare Conductivity probe
777089 Acetic Acid Solution 65ml
777124 P Alkalinity Indicator MPA1
777090 Std. Conductivity Solution
620
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
MA
MAXXID
IDIR
IRE
ECT P
PHO
HOT
TOME
METTER
661 777180
Features
Uses tablets, powder packs, liquids or vials
Wide range of test parameters
Reproducible results
Results displayed as ppm (mg/l)
Ordering information
Product number Product name
777180 MaxiDirect Photometer
Accessories
Product number Product name
777179 Chloride test pack 0 to 32ppm (100 tests)
777181 Phosphate test pack 0 to 80 ppm (100 tests)
6006393 Hydrazine test pack 0 to 0.6ppm (50 tests)
777182 Iron test pack 0 to 2ppm(100 tests)
777183 Copper test pack 0 to 1ppm (100 tests)
777184 Silica test pack 0 to 1.6ppm (50 tests)
777185 Ammonia test pack 0 to 1ppm (50 tests)
729541 Hardness test pack
698753 DEHA tablets
698761 DEHA test solution
729574 Dissolved oxygen vials
621
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
CHL
HLO
ORINE C
CHE
HEC
CKIT B
BLLOCK 0
0..2-
2-88P
PPPM
661 777073
Accessories
Product name Product number
Free chlorine DPD No. 1 Tablets 630293
OXYGEN F
FUULL K
KIT
IT 0-
0-40
40 P
PPPM O
O22 M34
M3411
661 777060
Features
Premade reagent vials
Vacuum sealed ampoules
Ordering information
Product number Product name
777060 OXYGEN FULL KIT 0 to 40ppb
Accessories
Product number Product name
777059 Replacement Oxygen Ampoules (0 to 40ppb)
622
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
LEGIO
IONE
NEL
LLA T
TEEST K
KIT
IT
661 777722
Accessories
Product name Product number
Legionella Test Kit 777722
623
POTABLE W
WA
ATER T
TEEST K
KIT
IT
661 777720
Features
Self contained testing kit, no training required
Test for E coli, coliforms, total bacteria, free chlorine and pH
ILO178/WHO/IMO/HPA/APHA compliant
Simple to operate
Compact & portable
Diseases on board ships water system, particularly for microbial and chemical
indicators, to report adverse results under the IHR 2005,
Improperly managed water is an established route for
where required, and to take corrective action.
infectious disease transmission on ships. This was illustrated
in a review of more than 100 outbreaks associated with ILO178
ships undertaken by Rooney et al. (2004). One fth was The International Labour Organization (ILO) is the United
attributed to a waterborne route. Nations body responsible for drawing up and overseeing
WHO Guide to Ship Sanitation (Third Edition) international labour standards. ILO178 denes international
standards for working and living conditions on board ship.
A ship operators role is to provide safe water to passengers
ILO178 references a number of guidelines, including the
and crew, t for all intended purposes. Water on board
WHO Guide to Ship Sanitation, for potable water testing
should be kept clean and free from pathogenic organisms
requirements and frequencies.
and harmful chemicals. Responsibilities are to monitor the
Ordering information
Product number Product name
777720 POTABLE WATER TEST KIT FULL VERS...
Accessories
Product number Product name
777932 E.COLI/COLIFORM TEST SET(100 TEST).
777933 HPC TEST SET (40 TESTS)
777934 CHLORINE DPD NO.Z(FREE)(250 TESTS..
777935 CHLORINE DPD NO.3(TOTAL)(250 TESTS)
777936 PHENOL RED(PH) (250 TESTS)
777937 ACIDIFYING GP TABLETS(CHLORINE)
777938 POTASSIUM IODIDE TABLETS (CHLORINE.
624
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
LOVIB
IBOOND 2000 C
CO
OMP
MPA
ARATOR
661 555565
Ordering information
Product number Product name
5555565 Lovibond 2000 Comparator
Accessories
Product number Product name
777096 Lovibond Comparator
777090 Lovibond Glass Cell 2x10ml
777177 Lovibond Light Source
777084 Phosphate Disc 0 to 20ppm
777071 Phosphate Disc 0 to 100ppm
777082 Hydrazine Disc 0 to 0.5ppm
777069 Comparator light source and spare cells
777093 20 ml Filter syringe
777094 GFC Filter paper holder
777095 GFC Filter papers
777085 Combined phosphate reagent
777086 Ascorbic acid tablets
625
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Naleet Water Test KIts
TEST K
KIT
IT C
COOOLTREAT A
ALLW
WIT
ITH
HCCL
LTTE
EST
661 758904
Accessible sampling cocks should exist on all cooling Before taking the sample the sampling line if present, should
systems for each diesel engine. This including, but not be thoroughly ushed with cooling water to ensure a
limited to, main jacket water, piston cooling, fuel oil valve, representative sample is used for testing. In each case of
auxiliary engines, low temperature systems, etc. A drawing a sample, the container should be lled with the
representative sample must be taken from each cooling water to be tested, sealed and labelled. It is advisable to
water system to be tested. To minimize the effort in obtaining conduct the appropriate tests within 30 minutes of drawing
cooling water samples, a sample cock located in a position the sample, although this time limit can be extended when
to draw a sample/having access to draw the sample quickly the sample container is completely lled and sealed.
and easily, will make the task of drawing samples simple.
Ordering information
Product number Product name
758904 TEST KIT FOR COOLTREAT AL...
Accessories
Product number Product name
735738 COOLTREAT SHAKER TUBE 50ML
735761 COOLTREAT CONSUMABLES REP PACK
555698 PH PAPER F/ 309 TEST KIT
735746 COOLTREAT REAGENT REP PACK
626
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Cleaning and Dosing Equipment
FUEL O
OIL
IL T
TRREATME
MENT
NT D
DOOSING U
UNIT
NIT
664 767924
Ordering information
Product number Product name
767924 FUEL DOSING STATION
Accessories
Product number Product name
683722 SPARES KIT BETA FUEL PUMP
670133 SPAREKIT GAMMA FUEL PUMP
683771 ALARM KIT FOR BETA PUMP
627
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Cleaning and Dosing Equipment
AUTOMA
MAT
TIC D
DOOSING F
FOOR S
SOOOT R
REEMO
MOV
VER L
LIQ
IQU
UID
664 767926
Features
Provides automatic dosage of soot remover
treatment
Automatic shut-off when temperature becomes low
All in one unit with programmable pump
Benets
Trouble free operation, no need for you to worry if the dosage is being done
No risk that the product will be dosed when the engine is not in operation or at optimum temperature
Compact unit that doesn't waste valuable space for you
The automatic soot remover unit can be programmed to Atomisation of the chemical is air assisted. The atomised
meet all dosing requirements. The unit injects Soot Remover Soot Remover Liquid is quickly evaporated and reacts with
Liquid as a ne mist into the exhaust through a nozzle. the unburned hydrocarbon which is burned into a dry ash.
Ordering information
Product number Product name
767926 AUT .DOSING UNIT FOR SOOT REMOVER L
Accessories
Product number Product name
624627 SOOT REMOVER LIQUID 25 LTR
628
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Cleaning and Dosing Equipment
MA
MANU
NUAAL D
DOOSING U
UNIT
NIT F
FOOR S
SOOOT R
REEMO
MOV
VER
LIQ
IQUUID
664 625194
The product is nely dispersed and prevents the build-up of installation instructions. For dosages of Soot Remover Liquid
soot and re scale in the exhaust system and exhaust boiler. please refer to the Product Data Sheet no. 815838
The installation and operation is fully described in the
Ordering information
Product number Product name
625194 MANUAL DOSING UNIT F/SRL
Accessories
Product number Product name
624627 SOOT REMOVER LIQUID 25 LTR
629
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Cleaning and Dosing Equipment
PORTABLE S
SOOOT R
REEMO
MOV
VER INJ
INJEECTOR
664 572065
Ordering information
Product number Product name
572065 PORTABLE SOOT INJECTOR
Accessories
Product number Product name
571240 SOOT REMOVER 25 KG
630
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Cleaning and Dosing Equipment
FIX
IXEED S
SOOOT R
REEMO
MOV
VER INJ
INJEECTOR
664 572073
Ordering information
Product number Product name
572073 FIXED INJECTOR
Accessories
Product number Product name
571240 SOOT REMOVER 25 KG
631
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Cleaning and Dosing Equipment
CHE
HEMIC
MICA
AL C
CLLEANING U
UNIT
NIT
664 737189
Designed for use with acid and caustic based products for Coldwash
descaling boilers, caloriers, heat exchangers and other Enviroclean
types of equipment where rust and scale form. It is also Alkleen Liquid
ideally suited for degreasing or decarbonising contaminated Aquabreak PX
systems. Carbonclean
ACC Plus
The Chemical Cleaning Unit can be used in conjunction with
Air Cooler Cleaner
the following Unitor chemicals:
Carbon Remover
Descalex Electrosolv-E
Descaling Liquid Aquatuff
Disclean Seaclean Plus
Metal Brite H.D. Commissioning Cleaner
Seaclean Ultra CIP
Ordering information
Product number Product name
737189 CHEM. CLEAN. UNIT W/HEATING, COATED
632
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Cleaning and Dosing Equipment
JET S
SPPRAY U
UNIT
NIT 10 L S
STTE
664 572099
Features
10 L tank with carrying strap
Spray gun and exible hose
Benets
Ergonomic application of chemicals
Safe to operate
Fast to pressurize
Easy to apply pre-mixed dilution
Ordering information
Product number Product name
572099 JET SPRAY UNIT 10 LTR STEEL
JET S
SPPRAY U
UNIT
NIT 10 L S
STTAINL
INLEESS S
STTEEL
664 572123
Ordering information
Product number Product name
572123 JET SPRAY UNIT 10 LTR ST.ST.
633
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Cleaning and Dosing Equipment
RECHA
HARRGEABLE S
SPPRAYER
Features
Environmentally safe
Rechargeable
Easy to maintain
Versatile
Economical
Suitable for Unitor products such as coverage is preferred or deeper penetration is required (such
as penetrating oil, lubricating oil, insecticide, etc. Ideal for
Enviroclean distant or inaccessible areas. Effective range up to 20 feet.
Fore and Aft Product no.664 572206
Coldwash HD
Uniwash Fine mist
Electrosolv-E Solid cone pattern, ne density. For use with lighter liquids
Aquabreak PX and applications that require extra uniformity such as mold
release agents and dry cleaning uids. Product no. 664
572214
Extension piece and different nozzles available:
Rigid 6-inch, extension piece
Pin stream Product no. 664 572230
Solid pin stream pattern. For applications where splash
Ordering information
Product number Product name
572172 RECHARGEABLE SPRAYER
572156 RECHARGEABLE SPRAYER
634
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Cleaning and Dosing Equipment
SPRAY G
GUUN 1 L
664 592568
Ordering information
Product Number Product name
592568 SPRAY GUN 1 LTR
SYPHO
HONNS
SQQUEEZER
664 572024
Features
Easy to use
Practical when transfering products
Ordering information
Product Number Product name
572024 SYPHON SQUEEZER
635
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
EASY S
SHIP
HIP C
COOMB
MBINE
INED
DOOIL
IL T
TEEST K
KIT
IT
663 773154
Features
Water in oil test
TBN test
Insolubles test
Salt water determination test
Viscosity comparison test
All necessary reagents and consumables
Practical and clear instructions provide guidance and
interpretations of test results for the complete range
of tests
Benets
Fast, accurate and reliable oil test results
Multiple oil parameters in an easy to use, portable oil analysis kit
Make informed on-site maintenance decisions
Act before the onset of critical failure
Robust and reliable for use in harsh or remote environments
Ordering information
Product number Product name
773154 UNITOR EASYSHIP COMBINED TEST KIT
Accessories
Product number Product name
Consumables:
773156 UNITOR EASYSHIP REAGENT PACK WATER
602805 WATER IN OIL REAGENT
632406 TBN REAGENT PACK
Spare parts available for purchase:
773158 UNITOR EASYSHIP UPGRADE PACK COMB
636
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
EASY S
SHIP
HIP W
WA
ATER IN O
OIL
IL T
TEEST K
KIT
IT
663 773155
Features
Reliable test for water content: 0-1%, 0-10% or
0-10000ppm
Short testing time: 3 min
Good accuracy
Reagent packs available worldwide
Benets
Eliminates damage caused by water in lube oil which will rapidly cause severe damage to an engine, bearing or
hydraulic system
Prevents corrosion, cavitation or failure of machinery by detecting water in oil, before any damage occurs
Minimises instability of additive packages and damaging microbe growth by monitoring oil
Fully portable for use onboard or in the eld, test cells are extremely robust, durable and easy to use
Ordering information
Product number Product name
773155 UNITOR EASYSHIP WATER TEST KIT
Accessories
Product number Product name
Consumables:
773156 UNITOR EASYSHIP REAGENT PACK WATER
602805 WATER IN OIL REAGENT
Spare parts available for purchase:
773157 UNITOR EASYSHIP UPGRADE PACK WATER
637
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
TBN T
TEEST K
KIT
IT
663 773150
Features
TBN digital cell
100 mL plastic beaker
10 mL disposable syringe
Disposable plastic gloves
TBN reagent pack
Manual TBN test kit
Benets
Easy to use
Reliable result in a few minutes
One reagent only (patented by Unitor)
Non-toxic and non-ammable
Simple cleaning with water after use
The kit gives results for crankcase and other lubricants in a used as an in-service check of depleting TBN to the
very short time, normally about 5 minutes. Designed for equilibrium value.
testing lubricants with TBN up to 60. The results may be
Ordering information
Product number Product name
773150 UNITOR TBN TEST KIT
Accessories
Product number Product name
Consumables:
632406 TBN REAGENT PACK
Spares parts available for purchase:
632430 ELECTRONIC REACTION CELL
638
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
COMP
MPA
ATIB
IBIL
ILIT
ITYYT
TEEST K
KIT
IT
663 773153
Features
Small and compact
Completely portable
Specically designed for onboard use
Complete with guide on methods to prevent sludging
Benets
Completely portable
Results can be used to determine if pre-combustion
additives are required and to assess dose rate
Easy to use
Fast - less than ve minutes operator time
No reagents, no glassware, disposable sample
containers and no cleaning
Conrm that the fuel delivery will remain stable in the
bunker tanks
Identify possible stability problems before mixing two
fuels
Help prevent sludge deposits, failure of fuel handling systems and costly combustion related engine damage
Ordering information
Product number Product name
773153 UNITOR COMPATIBILITY TEST KIT
Accessories
Product number Product name
Consumables:
555771 COMPATIBILITY SAMPLE TUBE
555789 COMPATIBILITY TEST PAPER
639
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
HE
HEAATED V
VIS
ISC
COSIT
ITYY ME
METTER
663 773151
Features
110-240 V AC
Reports directly in cSt, repeat reading in one minute
Calculation of Calculated Carbon Aromaticity Index
(CCAI)
Clear and comprehensive user instructions
Correct density from 50C. to kg/m3 @ 15C in
vacuo
Benets
Monitors changes in lubricating oil viscosity,
preventing costly engine and machinery failures
Veries correct fuel grade or blend has been
delivered
Checks that fuel viscosity is acceptable for storage,
pumping and puriers
Estimates the combustion performance (CCAI) of fuel
oil
The Heated Oil Viscometer is suitable for measuring both performance, plus adjusting of fuel handling and injection
fuel oil viscosity & lube oil viscosity from a wide variety of systems. Viscosity of lube oil is the most important property
applications including diesel engines, gas and aviation with the correct viscosity providing optimum lm strength in
turbines, gear boxes, hydraulics and fuel oils. system clearances, with minimum friction losses and
leakage.
Testing fuel oil viscosity is important for verifying the correct
grade of fuel is delivered, for calculating combustion
Ordering information
Product number Product name
773151 UNITOR HEATED VISCOSITY METER
640
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
DENS
NSIT
ITY
Y ME
METTER
663 773152
Features
With information and the viscosity of the fuel, the Density
Meter can determine:
Mass of fuel delivered
Caloric value
Calculation of density at 15 C in vacuo
centiPoise to centiStoke
CCAI (Calculated Carbon Aromaticity Index)
Clear instructions
110-240 V AC
Easy to use with quick results
Easy to clean
The Density Meter measures diesel and residual fuel density warm to 70 C. There is a calculator feature, which allows
and conrms the quantity of fuel delivered, veries that the the reading to be adjusted to show density at 15 C in a
correct grade of fuel has been delivered and estimates the vacuum. If the diesel and fuel viscosity is known in
combustion performance (CCAI), correct viscosity in cP to centiStokes or centiPoise the calculator will display the
cSt. CCAI. The Density Meter uses Hydrometers to measure the
The Density Meter measures fuel density using a hydrometer fuel density and marine diesel's density corrected to kg/m3
dropped in warmed oil. Most oils can be measured at 50 C at 15 C.
but for very viscous fuels and diesels the units can be set to
Ordering information
Product number Product name
773152 UNITOR DENSITY METER
Accessories
Product number Product name
Spare parts available for purchase:
632554 HYD 800-1.010
632521 HYDROMETER HYD900-1.010
632513 HYD 850-950
641
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
FUEL O
OIL
IL T
TEEST C
CAABINE
INETT
663 607820
Benets
All equipment is contained in a robust, metal case that is fully lockable for safe and secure sample storage.
Certied by Germanischer Lloyd, providing everything you need to ensure that your fuel samples are compliant with
IMO MARPOL 73/78 Annex VI regulations.
Replacement consumables and a full range of bunker samples are easily available through our network.
Ordering information
Product number Product name
607820 THE FUEL OIL TEST CABINET
Accessories
Product number Product name
Consumables:
773156 UNITOR EASYSHIP REAGENT PACK WATER
632406 TBN REAGENT PACK
602805 WATER IN OIL REAGENT
Spare parts available for purchase:
773158 UNITOR EASYSHIP UPGRADE PACK COMB
632414 ELECTRONIC REACTION CELL
632521 HYDROMETER HYD900-1.010
632513 HYD 850-950
632554 HYD 800-1.010
625756 SALT WATER DETERM. TEST
625749 INSOLUBLES TEST KIT
642
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
INS
INSOOLUBLES T
TEEST
663 625749
Features
1 pc bottle 100 mL
1 pc bottle cap
1 pc plastic stirring rod
1 pc drop bottle label
100 pcs chromatography papers
1 pc large module box
1 pc test kit manual
Ordering information
Product number Product name
625749 INSOLUBLES TEST KIT
SALT W
WA
ATER D
DEETERMINA
MINAT
TIO
ION
NTTE
EST
663 625756
Features
1 pc salt test pads
4 pcs pipette disposable 1 mL
1 pc test tube
1 pc disposable syringe 5 mL
1 pc white closure
1 pc reagent
1 pc large module box
1 pc test kit manual
Ordering information
Product Number Product name
625756 SALT WATER DETERM. TEST
643
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
BUNK
NKEER S
SAAMP
MPLLER
Features
Lloyds Register approved and manufactured under
strict ISO 9001:2000 quality assurance standards
IMO MARPOL 73/78 Annex VI compliant - helps you stay within the legal requirements for bunker sampling
Lightweight and very easy to install - obtaining a representative sample is quick and easy
Benets
Complies with current regulation
Ordering information
Product number Product name
606252 BUNKER SAMPLER 3 INCH
606253 BUNKER SAMPLER 4 INCH
606254 BUNKER SAMPLER 5 INCH
606255 BUNKER SAMPLER 6 INCH
606256 BUNKER SAMPLER 7 INCH
606257 BUNKER SAMPLER 8 INCH
606259 BUNKER SAMPLER 10 INCH
606260 BUNKER SAMPLER 11 INCH
606261 BUNKER SAMPLER 12 INCH
Accessories
Product number Product name
606265 5 LITRE CUBITAINER, 24 PACK
757252 CASE OF 70 SAMPLE BOTTLES
757245 SAMPLE BOTTLE MAILER KIT
606262 SAMPLER VALVE COVER PSA
644
MA
MARRINE C
CHE
HEMIC
MICAALS Test kits and equipment
Unitor Fuel Oil Test Kits
PLASTIC S
STTORAGE C
CAABINE
INETT
663 773159
The cabinet comes empty with a middle shelf but there are cabinet is used for storing Unitor Fuel Oil Test Kits and extra
accessories that can be added to make the cabinet more tray pack can be added for storing loose items easier in the
practical. A padlock can be added and used to lock the cabinet.
cabinet when samples are stored in the cabinet. If the
Ordering information
Product number Product name
773159 TEST KIT STORAGE CABINET
645
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+!"'&48*.42/6 0%'9*%93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+!"'&48*.42/6 0%'9*%93/52$&0"(&
SAFETY
SAFETY SERVICES
SAFETY SERVICES
Our Stations Our Service Agreements
Our customers have access to almost one hundred For over a decade, our customers have enjoyed the benets
ISO9001: 2008 approved global service stations, each and exibility of WSSs unique Safety Service Agreements.
equipped with state of the art test equipment and Whether a Fixed Price Agreement or full Safety
operating in accordance with IACS, UR, Z17 approvals and Management Contract, the benets include a predictable
governance. This ensures that a consistent service standard pricing schedule and a dedicated technical service
is achieved during a variety of services. coordinator who monitors vessel due dates and schedules
servicing to take place in the most convenient ports.
Our People
Vessels are serviced by experienced WSS multi-brand Customers are also given access to Navigate, a unique online
service technicians, all of whom have been trained through portal which allows direct access to upcoming due dates, real-
the Wilhelmsen Service Academy and various OEM time service information and technical equipment details as
centres, where focus is concentrated on the servicing well as the ability to print past and present service certicates.
and maintenance of marine reghting systems and the
requirements of IMO, SOLAS and the FSS Code. This Liferaft Raft Exchange Programme (LRE)
unrivalled training programme ensures the highest global WSSs market-leading global Liferaft Exchange
standards. Programme (LRE) exchanges out of date liferafts for
re-serviced operational ones, allowing customers to take
Our History better control of costs, increasing operational efciency by
WSS has experience of working with a vast range of multi- minimising vessels time during port stay and ensure that
brand safety systems and equipment, built up over almost their vessels remain fully compliant. Customers are informed
four decades as a market leader in the re and safety service when liferafts are due for annual service and they are then
sector. exchanged at any agreed port in any one of our Liferaft
Exchange centres around the world. Since its launch, the
Our Commitment
LRE concept has proved to be a market shaper, and is fast
We are committed to providing the highest ethical and replacing traditional liferaft ownership.
technical standards of safety service and expertise to our
global customer base and we work to ensure that our Our Service Capabilities
customers vessels and crew remain compliant and safe at Every 20 minutes, a WSS service technician begins work
all times. on a new task and we complete more than 21,000 services
annually on all makes and models of re and safety systems
Our Offer
and equipment.
WSSs global governance standards and local port coverage
enable us to provide exible solutions tailored to suit a range
of requirements from single vessel services to full eet
management. We work across ports internationally, saving
our customers time and money, and allowing them peace of
mind.
Our Service Tools
Whilst it is imperative to have the best tools for the job
onboard, we understand the importance of the best IT tools
onshore too. Every service that we complete is recorded
in our unique safety management system which is used
for safety service planning and the recording of a vessels
technical details, service intervals, due dates, service history,
regulations and certicates.
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+!"'&48*.42/6 0%'9*%93/52$&0"(&
SAFETY
FIRE PROTECTION
CABINE
INETTF
FOOR F
FIR
IRE
EEEX
XTING
INGUUIS
ISHE
HER
R6T
TO
O9K
KG
G
295 766827
Features
Polycarbonate windows
Can be wall of oor mounted
Plastic hinges and door catch
Rubber door seal for additional protection
Benets
Windows allow equipment to be checked quickly without removing it
You can wall or oor mount these cabinets to suit your storage availability
The plastic hinges and door catch give a longer life than traditional steel
The rubber door seal gives you additional protection against moisture and dusts
Technical data
Length 700 mm
Width 300 mm
Height 255 mm
652
SAFETY Fire Extinguishers
Cabinets for Extinguishers and Fire Blankets
CABINE
INETTF
FOOR F
FIR
IRE
EEEX
XTING
INGUUIS
ISHE
HER
R5T
TO
O9K
KG
G
294 723064
Features
For all 6 to 9 kg powder and water extinguishers,
and 5 kg CO2 extinguishers
Simple push button opening
316L marine grade hinges and rivets
Impact resistant and anti UV treated
Benets
You can standardise your storage for most extinguishers on board your vessels
It is impact resistant, has anti uv protection and is impervious to rain and spray cleaning so you can store externally in
busy places
Hinges and locks are 316L standard for effective resistance to saline and chemical corrosion giving you long product
life
It is protected by dated, identied lead seal which you can quickly and easily break in an emergency
Technical data
Length 700 mm
Width 300 mm
Height 255 mm
653
SAFETY Fire Extinguishers
Cabinets for Extinguishers and Fire Blankets
FIR
IREEB
BLLANK
NKEET 120 X 180 C
CMMW
WA
ALL-MO
-MOUUNT
NTEED
394 756130
Features
Highly visible
Tough outer cover
Easy to deploy
Benets
Multiple use applications from smothering ames to offering you protection
Wall hanging cover makes it available when you need it
Other sizes available on request
654
SAFETY Fire Extinguishers
Portable Extinguishers Cartridge Operated
POWDER E
EXXTING
INGU
UIS
ISHE
HERR 12 K
KG
GAAB
BC W
WIT
ITHO
HOUUT
BRACKET - P
P12P
12P M18
291 766994
Features
Higher re ratings
High levels of monoammonium phosphate for re
ghting even on electrical res up to 35 kV
High quality material and nish
Ordering information
Product number Description
766993 Extinguisher powder 12Kg with marine bracket
711416 Marine bracket
668251 CO2 cartridge
668319 ABC powder 12Kg
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication Society.
655
SAFETY Fire Extinguishers
Portable Extinguishers Cartridge Operated
POWDER E
EXXTING
INGU
UIS
ISHE
HERR9K
KG
GAAB
BC W
WIT
ITHO
HOUUT
BRACKET - P
P9P
9P M18
291 766990
Features
Higher re ratings
High levels of monoammonium phosphate for re
ghting even on electrical res up to 35 kV
High quality material and nish
Ordering information
Product number Description
766989 Extinguisher powder 9Kg with marine bracket
711416 Marine bracket
669655 Strap for marine bracket
668244 CO2 cartridge
668293 ABC powder 9Kg
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication society.
656
SAFETY Fire Extinguishers
Portable Extinguishers Cartridge Operated
POWDER E
EXXT. 6 K
KG
GAAB
BC W
W//O B
BRRKT - P
P6P
6P M18
291 766988
Features
Higher re ratings
High levels of monoammonium phosphate for re
ghting capability even on electrical res up to 35 kV
High quality material and nish
Ordering information
Product number Description
766987 Powder extinguisher 6Kg with marine bracket
668236 Spare 120g CO2 cartridge
711416 Marine bracket
669655 Strap for marine bracket
668972 6Kg ABC powder pack
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication Society.
657
SAFETY Fire Extinguishers
Portable Extinguishers Cartridge Operated
WATER EEX
XTING
INGU
UIS
ISHE
HERR9LW
WIT
ITHO
HOUUT B
BRRACKET E
E99
MO
MODDEL E
E99
290 766982
Features
Higher re ratings giving you quicker re ghting
capability even on electrical res up to 1000 V
High quality material and nish
Ordering information
Product number Description
766981 Water extinguisher 9L with marine bracket
711416 Marine bracket
669655 Strap for marine bracket
668178 CO2 cartridge
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication Society.
658
SAFETY Fire Extinguishers
Portable Extinguishers Cartridge Operated
FOAM E
EXXTING
INGUUIS
ISHE
HER
R9LW
WIT
ITHO
HOUUT B
BRRACKET
290 766984
Features
Higher re ratings
Easier re ghting capability
Safer re ghting
High quality material and nish
Ordering information
Product number Description
766983 Extinguisher foam 9L with marine bracket
711416 Marine bracket
736579 AFFF foam charge
668178 CO2 cartridge
Approvals
The extinguisher holds MED, RMRS, CCS, PED and NF EN
3 -7 approvals. The extinguishers are completely compliant
with the MED and SOLAS standards.
659
SAFETY Fire Extinguishers
Portable Extinguishers Cartridge Operated
ME
METTAL F
FIR
IRE
EEEX
XTING
INGU
UIS
ISHE
HERR9K
KG
GWWIT
ITHO
HOU
UT
BRACKET - P P9F
9FM.
M.M
M M18
290 657957
Features
Special powder and argon propelling agent for metal
re ghting
Easier re ghting capability
Safer re ghting
High quality material and nish
Benets
Specially blended Microre D powder enables you to ght metal res quickly and efciently
Integrated ow control valve at the hose end equips you with a direct and better control to ght re
Our higher than normal industry standard burst pressure for the cylinder and hose safeguards you when re ghting
A long life and low maintenance costs are assured as our extinguishers are manufactured from 2 mm thick steel,
shot blasted, and polyester coated with a non-rusting safety pin
660
Ordering information
Product number Description
711416 Marine bracket
766996 Metal re extinguisher 9Kg with marine bracket
Accessories
Product number Product name
759902 Microre D powder - 9Kg
759894 Spare charge argon cylinder
711416 UNIVERSAL BRACKET F/P6/P6P/P9P/
Approvals
The metal re extinguisher has been examined against the
provisions of Annex III, Module B, of the Pressure Equipment
Directive 97/23/EC.
661
SAFETY Fire Extinguishers
Portable Extinguishers Cartridge Operated
FOAM E
EXXTING
INGU UIS
ISHE
HER
R9LW WIT
ITHO
HOUUT B
BRRACKET E
EVV
LOW T
TMP
MP..HI T
TYYPE EE9A
9A1E
1EV
VLLT
T HP
290 764043
Features
Special high performance AFFF additive and
antifreeze
Easier re ghting capability
Safer re ghting
High quality material and nish
Benets
Specially blended AFFF additive with antifreeze
enables you to ght res at sub zero temperatures
quickly and efciently
Integrated ow control valve at the hose end equips
you with a direct and better control to ght re
Our higher than normal industry standard burst
pressure for the cylinder and hose safeguards you
when re ghting
A long life and low maintenance costs are assured as
our extinguishers are manufactured from 2 mm thick steel, shot blasted, and polyester coated with a non-rusting
safety pin
Technical data
662
FAT F
FIR
IRE
EEEX
XTING
INGUUIS
ISHE
HERR6LW
WIT
ITHO
HOUUT B
BRRACKET
MO
MODDEL EE6A
6A15
15 E
EVVF
290 763870
Features
A B F rated - specially designed for kitchen oil res
(Class F)
Easier and safer re ghting capability
High quality material and nish
Ordering information
Product number Description
766980 Fat re 6L extinguisher with marine bracket
668178 60g CO2 cartridge
736579 AFFF charge
711416 Marine bracket
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment and also complies with European
standard NF EN 3-7A1.
663
SAFETY Fire Extinguishers
Stored Pressure Extinguishers
POWDER E
EXXTING
INGUUIS
ISHE
HERR2K
KG
GAAB
BC W
W//SPC W
WIT
ITH
H
BRACKET MO
MODDEL PPPP2P
291 766995
Features
Higher re ratings
Safer re ghting
High quality material and nish
Ordering information
Product number Description
766969 Marine bracket
Approvals
This re extinguisher is certied according to Directive 96/98 standard EN 3 and is one of the highest performance
EC on Marine Equipment. It complies with European devices in its category.
664
SAFETY Fire Extinguishers
Stored Pressure Extinguishers
DP E
EXXTING
INGUUIS
ISHE
HER
R3K
KG
GAAB
BC P
PPP3P S
SPPW
WIT
ITHO
HOUUT
BRACKET
291 755322
Our Unitor range of re extinguishers offers you higher re ratings, easier re ghting capability and
increased levels of user safety. Whether you require cartridge, stored pressure or wheeled we use high
grade quality materials and coatings giving your extinguisher longer life and reduced maintenance
costs.
Features
Higher re ratings
Safer re ghting
High quality material and nish
Ordering information
Product number Description
755322 Extinguisher powder 3Kg stored press
667857 Marine bracket
Approvals
This re extinguisher is certied according to Directive 96/98 It complies with European AENOR - EN 3 standard, and is of
EC on Marine Equipment as well as Russian Maritime the hightest performance in its category.
Register of Shipping and China Classication Society
665
SAFETY Fire Extinguishers
Stored Pressure Extinguishers
CO2 E
EXXTING
INGUUIS
ISHE
HER
R5K
KG
GWWIT
ITHO
HOU
UT B
BRRACKET
MO
MODDEL U
U5C
5C
292 667535
Features
Higher re ratings
Safer re ghting
High quality material and nish
Ordering information
Product number Description
667527 Extinguisher CO2 5Kg with marine bracket
668111 Marine bracket
Approvals
This re extinguisher is certied according to Directive 96/98 It complies with European standard NF - EN 3, and has
EC on Marine Equipment as well as Russian Maritime demonstrated the highest performance in its category.
Register of Shipping and China Classication Society.
666
SAFETY Fire Extinguishers
Stored Pressure Extinguishers
DP E
EXXTING
INGUUIS
ISHE
HER
R6K
KG
GAAB
BC P
PPP6P S
SPPW
WIT
ITHO
HOUUT
BRACKET
291 671594
Features
Higher re ratings
Safer re ghting
High quality material and nish
Ordering information
Product number Description
671909 Marine bracket
668285 ABC powder 6Kg
Approvals
This re extinguisher is certied according to Directive 96/98 It complies with European AENOR - EN 3 standard, and is of
EC on Marine Equipment as well as Russian Maritime the hightest performance in its category.
Register of Shipping and China Classication Society.
667
SAFETY Fire Extinguishers
Stored Pressure Extinguishers
DP E
EXXTING
INGUUIS
ISHE
HER
R9K
KG
GAAB
BC P
PPP9P S
SPPW
WIT
ITHO
HOUUT
BRACKET
291 739508
Features
Higher re ratings
Safer re ghting
High quality material and nish
Ordering information
Product number Description
739516 Marine bracket
668293 ABC powder 9Kg
Approvals
This re extinguisher is certied according to Directive 96/98 It complies with European standard NF - EN 3 and is of the
EC on Marine Equipment as well as Russian Maritime highest performance devices in its category.
Register of Shipping and China Classication Society.
668
SAFETY Fire Extinguishers
Stored Pressure Extinguishers
DP E
EXXTING
INGUUIS
ISHE
HER
R 12 K
KG
GAAB
BC P
PPP12P S
SPPW
WIT
ITHO
HOUUT
BRACKET
291 743104
Features
Higher re ratings
Safer re ghting
High quality material and nish
Ordering information
Product number Description
743112 Marine bracket
668319 ABC powder 12Kg
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication Society.
669
SAFETY Fire Extinguishers
Wheeled Extinguishers
POWDER EEX
XTING
INGUUIS
ISHE
HER
R 50 K
KG
GAAB
BC P
P50P
50P
WHE
HEE
ELED
291 609735
Where you have high risk locations with limited access our range of wheeled extinguishers gives you a
lightweight high volume re ghting capability.
They provide you with the ability to quickly move high capacity extinguishers to the re easily.
Features
Higher re ratings
Easier re ghting capability
Safer re ghting
High quality material and nish
Ordering information
Product number Description
668335 CO2 cylinder
674317 ABC powder 25kg (X 2)
Approvals
This re extinguisher is certied according to Directive 96/98 Approved to EN1866 standards
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication Society.
670
SAFETY Fire Extinguishers
Wheeled Extinguishers
EXTING
INGUUIS
ISHE
HER
RCCO
O2 20 K
KG
GWWHE
HEEELED
292 767930
Features
Higher re ratings
Easier re ghting capability
Safer re ghting
High quality material and nish
Capacity 20Kg Long and non kinking hose with insulated spray
Min discharge range 3Mtr nozzle equips you with a direct and better control to
Test Pressure 300 Bar ght re
Our higher than normal industry standard burst
Working Pressure 176 Bar pressure for the cylinder and hose safeguards you
Weight Empty 24Kg when re ghting
Weight Full 49Kg A long life and low maintenance costs are assured as
our extinguishers are manufactured from 2 mm thick
Hose Length 5 mtr
steel, shot blasted, and polyester coated with a non-
Wheel Diameter 300 mm rusting safety pin
Fire Rating 144 B
Operating temp range -30C to +60C
Approvals
In compliance with the standard EN 1866-1. The
extinguisher is in compliance with MED, and approved by
BV, RMRS and CCS class societies.
671
SAFETY Fire Extinguishers
Wheeled Extinguishers
FOAM E EX
XTING
INGUUIS
ISHE
HER
R 45 L W
WHE
HEE
ELED MO
MODDEL
E45A
45A22
290 667378
Our Unitor range of re extinguishers offers you higher re ratings, easier re ghting capability and
increased levels of user safety. Whether you require cartridge, stored pressure or wheeled we use high
grade quality materials and coatings giving your extinguisher longer life and reduced maintenance
costs.
Features
Higher re ratings
Easier re ghting capability
Safer re ghting
High quality material and nish
Ordering information
Product number Description
668210 AFFF foam charge
668194 CO2 cylinder charge
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication Society.
672
SAFETY Fire Extinguishers
Wheeled Extinguishers
FOAM E EX
XTING
INGUUIS
ISHE
HER
R 13
1355LW
WHE
HEE
ELED MO
MODDEL
E13
135A
5A2
2
290 667386
Our Unitor range of re extinguishers offers you higher re ratings, easier re ghting capability and
increased levels of user safety. Whether you require cartridge, stored pressure or wheeled we use high
grade quality materials and coatings giving your extinguisher longer life and reduced maintenance
costs.
Features
Higher re ratings
Easier re ghting capability
Safer re ghting
High quality material and nish
Ordering information
Product number Description
668228 AFFF foam charge
668202 CO2 cylinder charge
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication Society.
673
SAFETY Fire Extinguishers
Wheeled Extinguishers
CO2 E
EXXTING
INGUUIS
ISHE
HER
R 45 K
KG
GWWHE
HEEELED
292 667568
Our Unitor range of re extinguishers offers you higher re ratings, easier re ghting capability and
increased levels of user safety. Whether you require cartridge, stored pressure or wheeled we use high
grade quality materials and coatings giving your extinguisher longer life and reduced maintenance
costs.
Features
Higher re ratings
Easier re ghting capability
Safer re ghting
High quality material and nish
Approvals
This extinguisher is in compliance with the standard EN
1866-1. The extinguisher is also in compliance with MED,
and approved by BV, RMRS and CCS class societies.
674
POWDER EEX
XTING
INGUUIS
ISHE
HER
R 25 K
KG
GAAB
BC W
WHE
HEE
ELED
P25P ME
291 767928
Features
Higher re ratings
Easier and safer re ghting capability
High quality material and nish
Ordering information
Product number Description
674317 ABC powder 25Kg
609743 CO2 cartridge cylinder
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication Society.
675
SAFETY Fire Extinguishers
Wheeled Extinguishers
CO2 E
EXXTING
INGUUIS
ISHE
HER
R9K
KG
GWWHE
HEEELED
292 767929
Features
Higher re ratings
Easier re ghting capability
Safer re ghting
High quality material and nish
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment as well as Russian Maritime
Register of Shipping and China Classication Society.
676
SAFETY Fire Extinguishers
Wheeled Extinguishers
EXTING
INGUUIS
ISHE
HER
RPPO
OWDER 25 K
KG
GWWHE
HEEELED
291 755348
Our Unitor range of re extinguishers offers you higher re ratings, easier re ghting capability and
increased levels of user safety. Whether you require cartridge, stored pressure or wheeled we use high
grade quality materials and coatings giving your extinguisher longer life and reduced maintenance
costs.
Features
Higher re ratings
Safer re ghting
High quality material and nish
Ordering information
Product number Description
674317 ABC powder 25Kg
Approvals
This re extinguisher is certied according to Directive 96/98
EC on Marine Equipment.
677
SAFETY Fire Extinguishers
Spare parts for re extinguishers
CO2 CCA
ARTRIDIDG
GE 60 G F
FOOR 9 L W
WA
ATER/ F
FOOAM E
E99/
E9A
9A1/E
1/E9A
9A1E
1EV
VEEX
XTING
INGUUIS
ISHE
HER
R
294 668178
Features
Easy to replace
High quality material and nish
678
SAFETY Fire Extinguishers
Spare parts for re extinguishers
CO2 C
CAARTRIDIDG
GE 450 G F
FOOR F
FOOAM 45 L
EXTING
INGUUIS
ISHE
HERR
294 668194
Features
Easy to replace
High quality material and nish
Benets
You can easily replace them by disconnecting the connections on the cylinder
Coated with zinc primer our cartridges have long shelf life and require minimal space for storage on your vessel
Technical data
Size 450g
679
CO2 C
CAARTRIDIDG
GE 2 K
KG
GFFO
OR 13
1355LF
FOOAM
EXTING
INGUUIS
ISHE
HERR
294 668202
Features
Easy to replace
High quality material and nish
Benets
You can easily replace them by disconnecting the
connections on the cylinder
Coated with zinc primer our cartridges have long
shelf life and require minimal space for storage on
your vessel
Technical data
Size 2Kg
680
CO2 C
CAARTRIDIDG
GE 120 G F
FOOR 6 K
KG
GPPO
OWDER
EXTING
INGUUIS
ISHE
HERR
294 668236
Features
Easy to replace
High quality material and nish
Benets
You can easily replace them by unscrewing them from the head cap
Coated with zinc primer our cartridges have long shelf life and require minimal space for storage on your vessel
Technical data
Size 120g
681
SAFETY Fire Extinguishers
Spare parts for re extinguishers
SPARE C
CAARTRID
IDG
GE 160 G F
FOOR 6 K
KG
GPPO
OWDER ((B
BC
RATED) E
EXXTING
INGUUIS
ISHE
HER
R
294 668244
Features
Easy to replace
High quality material and nish
Benets
You can easily replace them by unscrewing them from the head cap
Coated with zinc primer our cartridges have long shelf life and require minimal space for storage on your vessel
Technical data
Size 160g
682
SAFETY Fire Extinguishers
Spare parts for re extinguishers
CO2 C
CAARTRIDIDG
GE 180 G F
FOOR 12 K
KG
GPPO
OWDER
EXTING
INGUUIS
ISHE
HERR
294 668251
Features
Easy to replace
High quality material and nish
Benets
You can easily replace them by unscrewing them from the head cap
Coated with zinc primer our cartridges have long shelf life and require minimal space for storage on your vessel
Technical data
Size 180g
683
SAFETY Fire Extinguishers
Spare parts for re extinguishers
CO2 C
CAARTRID
IDG
GE 450 G FFO
OR 25 K
KG
GPPO
OWDER ((A
ABC
OR B
BCCRRA
ATED) E
EXXTING
INGUUIS
ISHE
HER
R
294 668327
Unitor offers a complete range of cartridges and charges to ensure that re extinguishers remain
compliant, requiring minimal technical knowledge to replace.
They are easy to replace and store on board your vessel. These are suitable for Unitor cartridge
operated 25 kg powder type extinguishers.
Features
Easy to replace
High quality material and nish
Benets
You can easily replace them by unscrewing them from the head cap
Coated with zinc primer our cartridges have long shelf life and require minimal space for storage on your vessel
Technical data
Size 450g
684
SAFETY Fire Extinguishers
Spare parts for re extinguishers
CO2 C
CAARTRID
IDG
GE 900 G FFO
OR 50 K
KG
GPPO
OWDER ((A
ABC
OR B
BCCRRA
ATED) E
EXXTING
INGUUIS
ISHE
HER
R
294 668335
Features
Easy to replace
High quality material and nish
Benets
You can easily replace them by disconnecting the connections on the cylinder
Coated with zinc primer our cartridges have long shelf life and require minimal space for storage on your vessel
Technical data
Size 900g
685
SAFETY Fire Extinguishers
Spare parts for re extinguishers
AFFF F
FOOAM CCHA
HARRGE 90 ML F
FOOR 9 L F
FOOAM
EXTING
INGUUIS
ISHE
HER
R
293 736579
Features
Easy to replace
High performance uoro additive
Benets
You can easily replace them by unscrewing them from the head cap
High performance uoro additive offers higher re ratings, strong wetting power, and impregnable lm that
extinguishes re quickly
Technical data
Size 90ml
686
SAFETY Fire Extinguishers
Spare parts for re extinguishers
AFFF F
FOOAM C
CHA
HAR
RGE F
F//E45A
45A22 23000
2300011-
11-0
0.9 L
294 668210
Features
High performance uoro additive
Easy to dose and store
Benets
High performance uoro additive offers higher re
ratings, strong wetting power, and impregnable lm
that extinguishes re quickly
The additive comes in small plastic bottles and is
easy to store and replace on board your vessel
Technical data
Size 0.9L
687
SAFETY Fire Extinguishers
Spare parts for re extinguishers
AFFF F
FOOAM CCHA
HARRGE 3 X 0
0..9 L F
FOOR 13
1355LF
FOOAM
EXTING
INGUUIS
ISHE
HER
R
294 668228
Features
High performance uoro additive
Easy to dose and store
Benets
High performance uoro additive offers higher re
ratings, strong wetting power, and impregnable lm
that extinguishes re quickly
The additive comes in small plastic bottles and is
easy to store and replace on board your vessel
Technical data
688
SAFETY Fire Extinguishers
Spare parts for re extinguishers
POWDER R
REEFIL
ILLLF
FOOR 6 K
KG
GAAB
BC E
EXXTING
INGUUIS
ISHE
HER
R
294 668285
Unitor offers ABC powder charges for the complete range of powder extinguishers. These come in
vacuum sealed packages in various sizes complementing your extinguisher.
Unitor's multi-purpose ABC powder is highly effective on class A, B or C res and can be used in the
presence of an electrical source.
Features
High re rating
Easy to store
Benets
Our re extinguishers boast high levels of monoammonium phosphate giving you quicker re ghting capability even
on electrical res up to 35 kV
Our powder charges come in vacuum sealed packages offering long shelf life and can be easily stored on board your
vessel
Technical data
Size 6Kg
Colour Light blue
Apparent density 850 - 950 Kg/m3
Water content < 0.25%
689
SAFETY Fire Extinguishers
Spare parts for re extinguishers
POWDER R
REEFIL
ILLLF
FOOR 9 K
KG
GAAB
BC E
EXXTING
INGUUIS
ISHE
HER
R
294 668293
Unitor offers ABC powder charges for the complete range of powder extinguishers. These come in
vacuum sealed packages in various sizes complementing your extinguisher
Unitor's multi-purpose ABC powder is highly effective on class A, B or C res and can be used in the
presence of an electrical source.
Features
High re rating
Easy to store
Benets
Our re extinguishers boast high levels of monoammonium phosphate giving you quicker re ghting capability even
on electrical res up to 35 kV
Our powder charges come in vacuum sealed packages offering long shelf life and can be easily stored on board your
vessel
Technical data
Size 9Kg
Colour Light blue
Apparent density 850 - 950 Kg/m3
Water content < 0.25%
690
SAFETY Fire Extinguishers
Spare parts for re extinguishers
POWDER R
REEFIL
ILLLF
FOOR 12 K
KG
GAAB
BC E
EXXTING
INGUUIS
ISHE
HER
R
294 668319
Unitor offers ABC powder charges for the complete range of powder extinguishers. These come in
vacuum sealed packages in various sizes complementing your extinguisher.
Unitor's multi-purpose ABC powder is highly effective on class A, B or C res and can be used in the
presence of an electrical source.
Features
High re rating
Easy to store
Benets
Our re extinguishers boast high levels of monoammonium phosphate giving you quicker re ghting capability even
on electrical res up to 35 kV
Our powder charges come in vacuum sealed packages offering long shelf life and can be easily stored on board your
vessel
Technical data
Size 12Kg
Colour Light blue
Apparent density 850 - 950 Kg/m3
Water content < 0.25%
691
SAFETY Fire Extinguishers
Spare parts for re extinguishers
POWDER R
REEFIL
ILLLF
FOOR 25 K
KG
GAAB
BC E
EXXTING
INGUUIS
ISHE
HER
R
293 674317
Features
High re rating
Easy to store
Benets
Our re extinguishers boast high levels of
monoammonium phosphate giving you quicker re
ghting capability even on electrical res up to 35 kV
Our powder charges come in vacuum sealed packages offering long shelf life and can be easily stored on board your
vessel
Technical data
Size 25Kg
Colour Light blue
Apparent density 850 - 950 Kg/m3
Water content < 0.25%
692
MA
MARRINE B
BRRACKET W
WIT
ITH
HSST
TRAP F
FOOR 5 K
KG
GCCO
O2
EXTING
INGU
UIS
ISHE
HERR
293 668111
Unitor offers a complete range of marine brackets for your re extinguishers. Smartly designed, our
marine brackets require minimal space for installation and give fast and easy access to the extinguisher.
These are easy to install and keep the extinguishers properly secured in place on board your vessel.
Features
Robust design
Adjustable strap
Benets
Our marine brackets are manufactured with quality steel and coated with primer offering you a long service life
Adjustable straps give you the exibility to adjust and secure the extinguisher properly
UNIV
NIVEERSAL B
BRRACKET F
FOOR P
P66/P
/P6P
6P/P
/P9P
9P// P
P12/P
12/P12P
12P//
E9/E
/E9A
9A11
293 711416
Features
Robust design
Adjustable strap
Benets
Our marine brackets are manufactured with quality
steel and coated with primer offering you a long service life
Adjustable straps give you the exibility to adjust and secure the extinguisher properly
693
SAFETY Fire Extinguishers
Spare parts for re extinguishers
MA
MARRINE B
BRRACKET W
WIT
ITH
HSST
TRAP F
FOOR P
PPP6P
293 671909
Features
Robust design
Adjustable strap
Benets
Our marine brackets are manufactured with quality
steel and coated with primer offering you a long service life
Adjustable straps give you the exibility to adjust and secure the extinguisher properly
MA
MARRINE B
BRRACKET W
WIT
ITH
HSST
TRAP F
FOOR P
PPP9P
291 739516
Features
Robust design
Adjustable strap
Benets
Our marine brackets are manufactured with quality
steel and coated with primer offering you a long service life
Adjustable straps give you the exibility to adjust and secure the extinguisher properly
694
SAFETY Fire Extinguishers
Spare parts for re extinguishers
EXTING
INGUUIS
ISHE
HER
RBBR
RACKET W
WIT
ITH
HSST
TRAP F
FOOR 12 K
KG
G
STORED PPR
RESSURE
291 743112
Features
Robust design
Adjustable strap
Benets
Our marine brackets are manufactured with quality
steel and coated with primer offering you a long service life
Adjustable straps give you the exibility to adjust and secure the extinguisher properly
695
SAFETY Fire Hoses, Couplings and Nozzles
Fire Couplings
NO
NORRWEGIA
IANNC
COOUPLING
Features
Standard connections
Easy to connect
Aluminium alloys tting
Technical data Our couplings and hose sockets come with standard
thread sizes and socket diameters, making
Nominal size 1 1/2, 2, 2 inch connection an easy process
Being manufactured from aluminium alloy makes
Benets them corrosion-proof and maintenance-free, giving a
more durable and longer life product
Standard connections make our couplings easily
compatible with your on board re ghting equipment
Ordering information
Product number Product name
233874 NOR-1 CPL W/1" HOSE SOCKET
233817 NOR-1 CPL W/2 " HOSE SOCKET
233908 NOR-1 CPL W/2" FEMALE THREAD
790593 NOR-1 CPL W2" FEMALE THREAD
233940 NOR-1 CPL W/2" MALE THREAD
233882 NOR-2 CPL W/1" HOSE SOCKET
233841 NOR-2 CPL W/2'' HOSE SOCKET
233916 NOR-2 CPL W/2" FEMALE THREAD
233957 NOR-2 CPL W/2" MALE THREAD
Accessories
Product number Product name
527697 NOR COUPLING SPANNER
696
SAFETY Fire Hoses, Couplings and Nozzles
Fire Couplings
STORZ C
COOUPLING
Features
Standard connections
Easy to connect
Aluminium alloys tting
Technical data Our couplings and hose sockets come with standard
thread sizes and socket diameters, respectively,
Storz type C, 65, B making them easier to connect
Nominal size 1 1/2, 2, 2 1/2 inch Aluminium alloy makes this socket corrosion-proof
and maintenance-free
Benets
Ordering information
Product number Product name
790336 STORZ C CPL W/1 HOSE SOCKET
233890 STORZ C CPL W/1" HOSE SOCKET
233858 STORZ C CPL W/2'' HOSE SOCKET
605121 STORZ C CPL W/1" MALE TREAD
233965 STORZ C CPL W/2'' MALE THREAD
233924 STORZ C CPL W/2" FEMALE THREAD
607965 STORZ C CPL W/2 1/2" FEMALE THREAD
523357 STORZ GASKET F/C CPL LUG 66
523431 STORZ 65 CPL W/2'' HOSE SOCKET
523449 STORZ 65 CPL W/2 1/2'' HOSE SOCKET
523456 STORZ 65 CPL W/2'' FEMALE THREAD
605311 STORZ 65 CPL W/2" FEMALE THREAD
595777 STORZ 65 CPL W/2" MALE THREAD
595769 STORZ 65 CPL W/2" MALE THREAD
784012 STORZ B CPL W/2" HOSE SOCKET
697
SAFETY Fire Hoses, Couplings and Nozzles
Fire Couplings
INS
INSTTANT
NTA
ANE
NEO
OUS C
COOUPLING
Features
Standard connections
Easy to connect
Aluminium alloys tting
Benets
Standard connections make our couplings easily
compatible with your on board re ghting equipment
Our couplings and hose sockets come with standard thread sizes and socket diameters, respectively, making them
easier to connect
Aluminium alloy makes this socket corrosion-proof and maintenance-free while having a long product life
Technical data
Ordering information
Product number Product name
572826 INSTANT. CPL W/1" HOSE SOCKETS
572842 INSTANT. CPL W/1" HOSE SOCKETS
572834 INSTANT. CPL W/2" HOSE SOCKETS
572933 INSTANT. CPL W/2" HOSE SOCKETS
572925 INSTANT. CPL FEMALE W/2"FEMALE THRE
572917 INSTANT. CPL FEMALE W/2"FEMALE THR
572941 INSTANT. CPL MALE W/2"MALE THREAD
572974 INSTANT. CPL MALE W/2" MALE THREAD
572966 INSTANT. CPL MALE W/2"FEMALE THREAD
572958 INSTANT. CPL MALE W/2"FEMALE THREA
572891 INSTANT. CPL FEMALE W/2"MALE THREA
698
SAFETY Fire Hoses, Couplings and Nozzles
Fire Hoses
MA
MARRTEX F
FIR
IRE
E HO
HOSSE
Features
High heat resistance
Light weight
Available with or without coupling
Approvals MED, EN 14540:2004 + A1:2007 Our hoses are manufactured from circular woven
Length Standard 15mtr or per meter polyester with inner EPDM rubber lining, providing
Inner diameter 1 1/2, 2 or 2 1/2 inch you hoses compatible with hot uids
Light in weight enabling you to carry them with ease
Max working 15bar on board your vessel
pressure We provide you with ready to use hoses tted with
Min burst pressure 50bar standard couplings or hoses without couplings, giving
Temp range -40 C to + 90 C you the exibility to choose and t the ones suited for
your re ghting equipment
Std Norwegian, Storz, Instantaneous or without
Coupling
couplings
Ordering information
Product number Product name
589739 MARTEX 2" W/STORZ C 2"" CPL 15MTR
589747 MARTEX 2" W/INSTANT. CPL 15MTR
589762 MARTEX F.HOSE 2 1/2"" X 15 M
564609 MARTEX FIRE HOSE 1 1/2 " PER METER
564617 MARTEX FIRE HOSE 2"" PER METER
605212 BINDING MACHINE PORTABLE
605220 BIND.BRACKET F/COUPLING
758888 BINDING WIRE 1.6MM STAINLESS STEEL
699
SAFETY Fire Hoses, Couplings and Nozzles
Fire Hoses
GUARDMA
MANNF
FIR
IRE
E HO
HOSSE
Features
Easy to use & with high durability
Available with our without coupling
Approvals MED, EN 14540:2004 + A1:2007 Our hoses are made of a rubber blend with circular
Length Standard 15 mtr or per meter woven polyester jacket giving you safer operations by
Inner diameter 1 1/2, 2 or 2 1/2 inch absorbing sudden pressure increases during use
Light weight design enables you to carry them with
Max working pressure 15bar ease onboard your vessel when ghting res
Min burst pressure 45bar We provide you with ready to use hoses tted with
Temp range -30 C to + 75 C standard couplings or hoses without couplings, giving
you the exibility to choose and t the ones suited for
Coupling Std Norwegian, Storz or without couplings
your re ghting equipment
Ordering information
Product number Product name
589606 GUARDMAN 1" W/NOR-1 CPL 15MTR
510701 GUARDMAN 2" W/NOR-1 CPL, 15MTR
510719 GUARDMAN 2" W/NOR-2 CPL, 15MTR
589598 GUARDMAN 1" W/STORZ C CPL 15MTR
510727 GUARDMAN 2" W/STORZ C CPL 15MTR
589614 GUARDMAN 2" W/STORZ 65 CPL 15MTR
233759 GUARDMAN 1 1/2" AT 15 MTR
233767 GUARDMAN 2" x 15 m, w/o COUPLINGS
233775 GUARDMAN 2 1/2" AT 15 MTR
574939 GUARDMAN FIRE HOSE 1 1/2" PER MTR
574947 GUARDMAN FIREHOSE 2" PER MTR
574954 GUARDMAN FIREHOSE 2 " PER MTR
605212 BINDING MACHINE PORTABLE
605220 BIND.BRACKET F/COUPLING
758888 Binding wire 1.6mm - Stainless steel
700
SAFETY Fire Hoses, Couplings and Nozzles
Fire Hoses
ME
MERRTEX F
FIR
IRE
E HO
HOSSE
Features
Extreme low temp use
Light weight
Available with or without coupling
Approvals MED, EN 14540:2004 + A1:2007 Our hoses are manufactured as circular woven with
Length Standard 15,18,20 mtr or per meter inner thermoplastic polyurethane lining safeguarding it
Inner diameter 1 1/2, 2 or 2 1/2 inch against both internal and external wear (UV radiation,
oil and commonly used chemicals), even at
Max working 15bar temperatures as low as -50 C
pressure Light weight design enables you to carry them with
Min burst pressure 50bar ease onboard your vessel when ghting res
Temp range -50 C to + 75 C We provide you with ready to use hoses tted with
standard couplings or hoses without couplings, giving
Std Norwegian, Storz, Instantaneous or without
Coupling you the exibility to choose and t the ones suited for
couplings
your re ghting equipment
Ordering information
Product number Product name
589630 MERTEX 1" W/NOR-1 CPL 15MTR
589622 MERTEX 1" W/STORZ C CPL 15MTR
758870 MERTEX 2"" W/STORZ C CPL 18 MTR
758862 MERTEX 2" W/STORZ C CPL 20 MTR
589671 MERTEX 2" W/STORZ 65 CPL 15MTR
589655 MERTEX 2" W/INSTANT. CPL 18MTR
589689 MERTEX 2" W/INSTANT. CPL 18MTR
589580 MERTEX FIRE HOSE 1" PER MTR
589572 MERTEX FIRE HOSE 2" PER MTR
589564 MERTEX FIRE HOSE 2.5" PER MTR
605212 BINDING MACHINE PORTABLE
605220 BIND.BRACKET F/COUPLING
758888 BINDING WIRE 1.6MM STAINLESS STEEL
701
SAFETY Fire Hoses, Couplings and Nozzles
Fire Hoses
CLAMP
MPING
ING D
DEEVIC
ICEEF
FOOR B
BIND
INDING
ING MA
MAC
CHINE
295 605220
BIND
INDING
ING MA
MAC
CHINE P
POORTABLE
295 605212
702
SAFETY Fire Hoses, Couplings and Nozzles
Fire Hydrants
HY
HYDDRANT V
VA
ALVE
Our Unitor re hydrant valves enable you to connect the re hoses with the re mains onboard your
vessel. They come with straight or angled ange connections.
The re hydrant valves are made of aluminium alloy suited for marine environments giving you a
maintenance-free and corrosion-resistant product.
Features
High corrosion-resistant
Does not include couplings
Robust material
Benets
Our hydrants are manufactured from aluminium alloy offering you a high corrosion-resistant product with a
maintenance-free long life
Gives you the choice to connect to any coupling compatible with the re main system on board your vessel
One-piece cast body offers you a robust hydrant
Ordering information
Product number Product name
775577 HYDRANT VALVE 2""W/FLANGE STRAIGHT
775544 HYDRANT VLV 2 1/2"W/FLANGE STRAIGH
534198 HYDRANT VALVE W/2'' MALE THREAD
590232 HYDRANT VALVE 2"W/FLANGE DN65 PN16
534172 HYDRANT VALVE 2" W/FLANGE DN50 PN16
791693 HYDRANT DIVIDER STORZ 65*3XSTORZ 65
703
SAFETY Fire Hoses, Couplings and Nozzles
Fire Hydrants
INT
INTEERNA
NAT
TIO
IONA
NALLS
SHIP
HIP T
TO
OSSHO
HORRE C
COONNE
NNECCTIO
IONN
Our Unitor International Shore Connections are in accordance with the regulation of "International
Convent for the Safety of Life at Sea, 1960" (SOLAS). They are used for connecting your onboard re
ghting installation mains to the harbour. The dimensions of the ange are standardized globally.
This International Shore Connection comes with Storz C couplings or without couplings.
Features
Connection to harbour re lines
Standardised connection
Fitted with Storz C or without coupling
Benets
This connection allows you to connect the onboard re main line with the harbour re systems in emergency and in
dry dock
Standard ange size connection makes it easy and quick to connect in any port
Gives you the choice to connect any coupling compatible with your onboard re main connection or with the Storz C
connection
Technical data
Ordering information
Product number Product name
607966 INT.SHORE CONN W/2 1/2" MALE THREAD
607967 INT SHORE CONN W/STORZ C
727753 INT. SHORE CONN W/2" MALE THREAD
704
SAFETY Fire Hoses, Couplings and Nozzles
Fire Nozzles
FIR
IREE NO
NOZ
ZZLES
Features
Variable ow rate and spray angle
Light weight
Corrosion proof
Approvals EN 15182-1&3:2007 +A1:2009 Variable ow rates and spray angles give you the
std exibility to adjust water use as per your requirement
Nitrile butadiene rubber (NBR) & Polyoxymethylene Light weight enables you to carry them with ease
Material onboard your vessel when ghting res
(POM)
The use of NBR rubber for the operating head and a
POM plastic tube body makes our nozzles corrosion-
proof, giving you a long lasting product
Ordering information
Product number Product name
708271 SPRAY/JET NOZZLE 12MM HS-12
708289 SPRAY/JET NOZZLE 16MM HS-16
708297 SPRAY/JET NOZZLE 20MM HS-20
737759 TURBO NOZZLE 2000 W/2" MALE THREAD
705
SAFETY Fire System products
Foam Concentrates
FOAM CON
NCCEN
NTTRATES
Our range of foam concentrates gives you a wide range of coverage from engine spaces to open
decks, all approved to MED. You can choose from regular or uoro protein, AFFF, and synthetic foam
concentrates with alcohol-resistant variants. We can also test your foams to ensure you comply with
national ag and appropriate class standards.
Our technical support teams and stocks are available to support your needs at key ports globally.
Features
t Available in 20 and 200 litre containers
t Used in a wide range of pumps and applicators
t High, medium and low expansion rates
t Testing to required standards
Benets
t You can choose from 2 sizes of containers for ease of handling and convenience
t We give you an extensive choice of concentrates to meet your requirements
t We offer testing of the foam concentrate and small scale re tests to ensure you comply to IMO MSC1312
t Our customer support ranges from technical advice to design and service of your foam systems
Ordering information
Product number Description
Unitor deck foam concentrates:
UNIVEX Super Universal-alcohol resistant
764987 UNIVEX 3x3 Super FP-AR 3% 20 Lt can
764985 UNIVEX 3x3 Super FP-AR 3% 200 Lt drum
764988 UNIVEX 3x3 Super FP-AR 6% 20 Lt can
764986 UNIVEX 3x3 Super FP-AR 6% 200 Lt drum
AFFF alcohol-resistant
777688 AFFF-AR 3% 20 Lt can
777927 AFFF-AR 3% 200 Lt drum
AFFF
777686 AFFF 3% F-15 20 Lt can
777685 AFFF 3% F-15 200 Lt drum
777696 AFFF 1% F-20 20 Lt can
777695 AFFF 1% F-20 200 Lt drum
777692 AFFF 3% F-25 20 Lt can
777691 AFFF 3% F-25 200 Lt drum
777694 AFFF 6% F-35 20 Lt can
777693 AFFF 6% F-35 200 Lt drum
UNIMIN
576454 UNIMIN Protein 3% 20 Lt can
706
Product number Description
574723 UNIMIN Protein 6% 20 Lt can
UNIROL
592204 UNIROL Flouroprotein 3% 20 Lt can
556084 UNIROL Flouroprotein 3% 200 Lt drum
592212 UNIROL Flouroprotein 6% 20 Lt can
UNIREX
592196 UNIREX Synthetic 3-6% 20 Lt can
556092 UNIREX Synthetic 3-6% 200 Lt drum
Hydral
772392 HYDRAL AFFF 3% (S3) 25 Lt can
772384 HYDRAL AFFF 3% (S3) 200 Lt drum
Unitor Hi expansion foam concentrate
711808 HIGH Expansion Synthetic Foam
2% 20 Lt can
711390 HIGH Expansion Synthetic Foam 2% 200 Lt drum
Accessories
Product number Product name
605030 Unitor foam applicator MLR - 40 SA 215 L/ 3%
605048 Unitor foam applicator MLR - 40 SA 215 L/ 6%
605055 Unitor foam applicator MLR - 40 SA 400 L/ 3%
605063 Unitor foam applicator MLR - 40 SA 400 L/ 6%
606080 Foam station box
605121 Storz C coupling with 1 1/2 inch male thread
605113 Storz 65 coupling with 1 1/2 inch male thread
791455 Storz B coupling with 1 1/2 inch male thread
678953 Nakajima coupling 40A with 1 1/2 inch male thread
707
SMO
MOKKE A
AND
ND HE
HEAAT D
DEETECTOR T
TEESTING
Features
Heat, smoke and CO2 testers
Synthetic smoke aerosols
Extension poles for high ceilings
Powered and non powered units
Universal design suits widest range of detectors (up to 100mm / Functional checking is accomplished by introducing a
4" in diameter) smoke, or simulated smoke, stimulus from the protected
area through the vents of a detector to the sensor(s). It is
required by all national standards around the world and
Benets testing by electronic means which do not involve this test are
not sufciently compliant.
UL listed
Universal suits most detectors Calibration (or sensitivity) testing
Lifetime warranty Sensitivity testing conrms whether the detectors
Approved by leading detector manufacturers performance is within the acceptable parameters. Although
some countries codes accept eld sensitivity tests of smoke
Smoke detector testing detectors by electronic means it can only be properly done
Test requirements for smoke detectors vary by country but by introducing a quantied source of smoke or surrogate
fall broadly into two categories: smoke to the detector from the protected atmosphere.
Ordering information
Product number Description
740811 Aerosol smoke and CO2 tester
740829 Telescopic pole
751305 Extension for telescopic pole
740837 12 pack Smoke tester aerosols
743070 Heat detector tester
740845 Cordless heat detector tester
708
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!&23/.","'&4860%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!&23/.","'&4860%'9*%
93/52$&0"(&
SAFETY
PERSONAL SAFETY
BREATHING A
AIR
IR C
COOMP
MPRRESSORS
Features
Wide range of types and pressures
All units can be pressure reduced or increased to suit
breathing apparatus or lifeboat air cylinders
Bauer Triplex lter technology
Lightweight, anti-corrosion strong frames
Benets
You can opt for light or heavy use and still use change over devices to alternate pressures from 200 to 300 bar
Light-weight space age frames allow you to manoeuvre them around your vessel
Bauer's famous Triplex lter technology will give you pure air on a consistent basis
Corrosion-resistant making them ideal for you to use on board
Junior II and Oceanus come complete with air purication compressors which are easily maintained on board. They are
system and a ll hose. They are safe and reliable three stage supplied with a three phase 230/460 VAC electric motor.
712
JUNIO
NIORR II-E A
AIR
IR C
COOMP
MPRRESSOR
Features
200 bar lling
Long-life Triplex P21 lter cartridges ensure cleaner
air (EN12021)
Highly engineered, robust, light-weight and portable
Ordering information
Product number Description
619387 Junior II Compressor 400/440v - 200 bar
619395 Junior II Compressor 400/440v - 300 bar
619403 Junior II Compressor 400/440v - 200/300 bar
Accessories
Product number Description
709139 Change over device from 200 to 300 bar
652644 Junior II Service kit 500 hours
652651 Junior II Service kit 1000 hours(also need 652644)
736208 Junior II Service kit 2000 hours(also need 652651)
655134 Mineral oil 1 litre for compressors from 1999 to July 2006
655167 Synthetic oil 1 litre for compressors from September 1992 to March 1999
758169 Synthetic oil 1 litre for compressors from July 2006 onwards
736660 Breathing air quality test kit
Approvals
The compressor is approved to the highest standards of the
Pressure Equipment Directive 97/23/EC. Quality of breathing
air delivered complies to DIN EN12021.
713
SAFETY Respiratory Equipment
Breathing Air Compressors
OCEANU
NUSSEA
AIR
IR C
COOMP
MPRRESSOR
Features
200-300 or 200/300 bar lling
Long-life Triplex P21 lter cartridges ensure cleaner
air (EN12021)
Highly engineered, robust and light-weight
Benets
Triplex lters ensure a safe source of clean breathing
air consistently
The built in B Timer provides a lter condition status,
scheduled maintenance and running hours log to ensure the quality of your air remains high
The corrosion-resistant steel frames make it ideal for use on board vessels
We have a 20 year spare parts supply in addition to global technical service to support your investment for the long-
term
Ordering information
Product number Description
735829 Oceanus compressor 400/440v 200 bar
735837 Oceanus compressor 400/44v 300 bar
735845 Oceanus compressor 400/440v 200/300 bar
Accessories
Product number Description
709139 Change over device from from 200 to 300 bar
764100 Service kit Oceanus 500 hours
764118 Service kit Oceanus 1000 hours(also require 764100)
764126 Service kit Oceanus 2000 hours (also require 764118)
655134 Mineral oil for compressors from 1999 to July 2006
655167 Synthetic oil for compressors from September 1992 to March 1999
758169 Synthetic oil for compressors from July 2006 onwards
736660 Breathing air quality test kit
Approvals
The compressor is approved to the highest standards of the
Pressure Equipment Directive 97/23/EC. Quality of breathing
air delivered conrms to DIN EN12021.
714
SAFETY Respiratory Equipment
Breathing Air Compressors
BREATHING A
AIR
IR C
COOMP
MPRRESSORS B T
TIME
IMER
R
395 755967
Features
Records running hours
Continuous lter cartridge monitoring
3 year battery life
Benets
Provides easy to read maintenance log for continual monitoring of your compressors
Your lter cartridge is constantly monitored ensuring you receive clean air
The 3 year battery gives you a long life and with no wiring necessary you can t the B Timer quickly and simply
Technical data
715
SAFETY Respiratory Equipment
Breathing Air Compressors
COMP
MPRRESSOR F FIL
ILT
TER CCHA
HARRGE F
FOOR J
JUUNIO
NIORR/
OCEANU
NUSSTTR
RIP
IPL
LEX FFIL
ILT
TER
395 528935
Features
Contains activated carbon, hopcalite and molecular
sieve
Easy to handle and replace
Benets
This lter maintains the high quality of your breathing
air
It is a quick replacement when your B Timer lter
status alerts
Technical data
Standard EN 12021
Oil / Aerosols <0.1 mg/m3
CO < 5 ml/m3
CO2 < 500 ppm (V/V)
Water vapour < 10 mg/m3
Odour / taste Nil
SO2 < 0.1 ppm (v/v)
NO < 0.1 ppm (v/v)
NO2 < 0.1 ppm (v/v)
716
SAFETY Respiratory Equipment
Breathing Air Compressors
BAUER C
COOMP
MPRRESSOR F
FIL
ILL
LING HO
HOSSE 50 M D
DN6,
N6,
PN450
395 758847
Bauer compressor 50 metre hose for lling lifeboat cylinders. They are exible and tted with hose
protection and a handle on the end of the pressure gauge as well as ttings of stainless steel. All hoses
and ttings are 100% pressure tested, have a 20,000 cycle test and the corresponding approval.
Bauer compressor lling hoses feature a very high certied temperature range.
Features
Ease of use
Robust material
Operating pressure 425 Bar Long length and standard ttings enable you to
Connection M16 X 1.5 connect the compressor with lifeboat cylinder without
DN 5 mm moving them from their location
Fluoropolymer pricked hose withstands extreme
Outer dia 13.3 mm weather conditions providing you with safe operation
Outer layer Pricked
Resistant agianst Salty air, salt water, sun and fuel
Material Fluoropolymer
Temperature -40 C to + 100 C
Colour Black
717
SAFETY Respiratory Equipment
Breathing Air Compressors
COMP
MPRRESSOR 300-
300-200
200 B
BAAR C
CHA
HANG
NGEEO
OV
VER
DEVIC
ICEE
395 709121
Bauer change over devices increase the exibility of use of your compressors to allow for varying
pressure requirements. The 300-200 bar change over device comes complete in kit form for immediate
use and is simple to install requiring no specialist knowledge.
Benets
The black hand wheel on the lling gives you a safety precaution to differentiate the pressure the compressor is set at
The simple bolt on kit requires you to have no specialist knowledge to install
You can install on any Bauer compressors
WSS global service support gives you assurance should you need any assistance or advice
CHA
HANG
NGE
EOOV
VER DDE
EVIC
ICEEF
FRROM 200-
200-300
300 B
BAAR
COMP
MPLLF
FOOR B
BAAUER C
COOMP
MPRRESSOR
395 709139
Bauer change over devices allow Junior / Oceanus compressors to be used for a number of pressure
applications. The 200 to 300 bar change over device comes complete in kit form for immediate use.
Benets
The red hand wheel on the lling gives you a safety precaution to differentiate the pressure the compressor is set at
The simple bolt on kit requires you to have no specialist knowledge to install
You can install on any Bauer compressors
WSS global service support gives you assurance should you need any assistance or advice
718
SAFETY Respiratory Equipment
Breathing Air Compressors
COMP
MPRRESSOR B
BRREATHING A
AIR
IR Q
QUUALIT
ITYYT
TEEST K
KIT
IT
391 736660
Features
Can measure 4 gases simultaneously
Ready to use
Uses readily available testing tubes
Operational medium Air Our kit enables you to accurately measure carbon
Max pressure 300 bar monoxide, carbon dioxide, water, oil and nitrous
Flow preset for CO & CO2 tubes 0.3 Ltr/min oxide levels in breathing air
Preset settings of the ow rate for the gases to be
Flow preset for H2O tubes 1 ltr/min measured enables you to use the kit instantly
Flow preset for oil tubes 2.5 Ltr/min Tubes are clearly arrow marked for use with the kit
Flow preset for nitrous gases tubes 0.3 ltr/min giving you quick and easy to understand results
Ordering information
Supplied with: Detector tubes (package of 10) for measuring CO,
CO2, water vapor and oil. The standard case
The test device, consisting of a pressure reducer, contents one pack of each of the four types of
pressure gauge and detector tube holder detector tubes. In addition the case has space for
Adapter for connection to a compressor charging storing four additional spare packages.
panel (for DIN charging connection 300 or 200 bar)
Timer Test tubes for nitrous oxide measurement are
Flow meter available on request.
Tube breaker for breaking detector tube tips
719
SAFETY Respiratory Equipment
Filter Masks / Breathing Filters
BREATHING F
FIL
ILT
TER MA
MASSKS
Features
You can choose from a range of half or full masks with quick interchangeable lters
Our Advantage 3000 range is available in three sizes
Airtight and comfortable face seals and harness
We supply globally and provide global technical support
Benets
The interchangeable lters reduces the numbers of masks you need to provide on board
Your choice of three sizes will deliver excellent comfort for all users during hazardous situations
Our global support helps you comply with both national and international health and safety regulations
Ordering information
Product number Description
667154 Advantage 200 Half Mask
650358 Advantage 3200 Small Bayonet lter
650366 Advantage 3200 Medium Bayonet lter
650357 Advantage 3200 Large Bayonet lter
650382 Advantage 3100 Small Threaded lter
650390 Advantage 3100 Medium Threaded lter
650408 Advantage 3100 Large Threaded lter
720
SAFETY Respiratory Equipment
Filter Masks / Breathing Filters
ADVANT
NTA
AGE 3121 S
SING
INGL
LE F
FIL
ILT
TER T
THR
HRE
EADED ME
MEDD.
391 650390
Features
Threaded lter connections
Large, optically corrected lens providing a clear, undistorted view
Benets
Innovative harness design and choice of 3 sizes means excellent comfort for all users during hazardous situations
Interchangeable lters reduce the number of masks needed on board
WSS global service network support
Accessories
Product number Product Description
650424 AX Filter
650465 E2 Gas Filter
650473 K2 Gas Filter
650481 P3 Dust Filter
650499 A2/B2/E2/K1 Gas Filter
650507 A2/B2/E2/K2 Gas Filter
650515 A2-P2 Combi lter
650523 B2-P2 Combi lter
650606 A2/B2/E2/K1/HG/P3 Combi lter
650614 A2/B2/E2/K2/HG/P3 Combi lter
650630 A1/B2/E2/K1/CO/NO/P3 Combi lter
721
SAFETY Respiratory Equipment
Filter Masks / Breathing Filters
BREATHING MA
MASSKS F
FIL
ILT
TER R
RAANG
NGEE
Features
You can choose either single or duo combination lters
Our simple click or screw lters provide efcient and quick service and maintenance times
This lter ranges cover both gaseous and particulate hazards
Benets
Interchangeable lters reduce the number of masks you need to provide on board
You will benet from comfort through easy breathing technology
Our global support augments your ability to comply with both national and international health and safety regulations
722
SAFETY Respiratory Equipment
Compressed Air Breathing Apparatus
SELF C
CO
ONT
NTA
AINE
INED
DBBR
REATHING A
APPPARATUS
Features
Wide range of adjustment on the ergonomically designed back plate
Wide range of uses
Latest technology xed demand valves
Benets
Flexible adjustment gives you the option to cover a wider size range so require fewer units
You can use the Unipack in conjunction with our chemical suit range or choose the second air for rescue situations
Our state of the art xed demand valve allows you to don the unit quickly and requiring minimal maintenance costs
We can individually tailor your Unipack requirements with our range of optional accessories to meet your specic
needs
Accessories
Product number Description
757879 Unipack II BA set without cylinder
757881 Unipack II with supplementary air connection without cylinder
667279 Rescue Mask with 1.5 metre hose for Unipack II supplementary air set
690412 6 litre 200 bar steel cylinder lled
690453 6 litre 300 bar steel cylinder lled
690438 7 litre 200 bar steel cylinder lled
739961 6.8 litre 300 bar composite cylinder lled
Additional accessories: For hose connections for chemical suits see the
relevant suit type
WSS can also supply cylinders with no air charge
Communications equipment also available on request
Approvals
MED approved
723
SAFETY Respiratory Equipment
Emergency Escape Breathing Device
UNIS
NISCCAPE E
EEEBD
Features
Fast automatic activation
One size hood
Clear vision
Low maintenance
724
Ordering information
Product number Description
668913 Uniscape 15 minute emergency escape breathing device with air
669473 Uniscape 15 minute emergency escape breathing device without air
Accessories
Product number Description
638395 Uniscape Cabinet
628164 Uniscape Wall Bracket set
632760 Covers for Uniscape wall bracket set
Approvals
MED approved. It has been designed and tested in compliant with the safety requirements of EC Directive 96/98
accordance with EN 1146 and has demonstrated to be Marine Equipment.
725
SAFETY Personal Protection
Chemical Protection
CHE
HEMIC
MICA
AL S
SUUIT
ITSS
Features
Rubber, Viton or PVC options
Positive pressure air supplied or splash only
Bayonet glove ring system on pressurised suits
Benets
Our 3 materials offer differing levels of protection to suit your particular hazard
You have a choice dependant on your risk of either splash only or positive pressure suits
The Trellchem bayonet system for gloves gives you a positive seal ensuring it is gastight
Technical data All Trellchem positive pressure suits increase your safety and
can either be fed by BA sets giving you total freedom of
Airows can be set at either 2 or 30 litres per minute movement or by connecting to a hose from your vessels air
Pressurisationwith BA sets or optionally 30 or 100 litres when supply. This pressurised system with varying airow levels
operating with an external airline gives you protection against leaks, for example by accidental
perforations, and also provides the suit with ventilation.
Approvals
MED approved
726
SAFETY Personal Protection
Chemical Protection
CHE
HEMIC
MICA
AL R
REESIS
ISTTANT P
PEERSONA
NALLP
PRROTECTIO
IONN
KIT
394 576843
Features
Helmet with visor cap and bib
Goggles, suit, apron and gloves
MED approved
Benets
The fully approved helmet includes a visor for splash
protection in your face
Additionally we supply goggles that can be worn under the visor to ensure your eyes are fully protected
The suit is a one piece protecting your body from any harmful splashes plus we add an apron as added protection
for the suit
As most work is done with the hands it is imperative to protect them so we include gauntlets to give full hand and
lower protection
Helmet assembly - White safety helmet to EN397, high- Suit - Blue PVC with elasticated hood, single elasticated
density polyethylene shell, low-density polyethylene head sleeves, elasticated single legs, polyester/nylon zip with
harness, acetate visor BS2092 Grade 2 chemical double storm ap over and press stud closure;
size large, chest 112 cm
Goggles - EN166 1C
Apron - Blue PVC apron 76 x 93 cm with eyelet and tapes
Gloves - Rubber gauntlet 43 cm long, EN374
Ordering information
Product number Description
576843 Unitor chemical resistant personal protection kit
571018 Chemical safety boot size 42
571026 Chemical safety boot size 43
571034 Chemical safety boot size 44
571042 Chemical safety boot size 45
727
SAFETY Personal Protection
Chemical Protection
TRELLCHE
HEMMS
SUUPER T
T-E
-ETT
Features
Includes mini hood
BA worn outside of suit
Positive pressure suit
MED approved
Abrasion resistance. EN 530, method 2 You can use the Super T-ET with most standard BA
Flex cracking ISO 7854, method B sets with supplementary air connections
Available in 3 sizes for correct t and high comfort
Flex cracking at -30 Deg.C ISO 7854, method B The polyamide fabric coated with Viton and Butyl
Trapezoidal tear resistance ISO 9073-4 rubber gives excellent protection against acids,
Tensile strength ISO 13934-1 alkalis, solvents, petrochemicals and warfare agents
We can advise on the correct hoses and ttings if we
Puncture resistance EN 863
know type of BA sets on board
Resistance to ame EN 13274-4, method 3
Seam strength ISO 5082 Supplied with: Chemical resistance table, Storage bag, suit
Antistatic EN 1149-3, EN 1149-5 hanger, instructions for storage, Record card for use and
chemical exposure
Ordering information
Product number Description Size Height Chest
758250 Trellchem Super T-ET with mini hood,without hose Small 170-182cm 88-96cm
740530 Trellchem Super T-ET with mini hood,without hose Medium 176-188cm 92-100cm
740555 Trellchem Super T-ET with mini hood,without hose Large 182-194cm 96-104cm
Accessories
L39499 Repair kit for Trellchem Super
749861 Molykote grease for Chemical suits
669358 Unipack BA set hose with outlet for 2nd air unit
669366 Unipack BA set hose
605204 Trellchem hood for BA set protection
749838 Viton butyl gloves for VPS/Super and Light Trellchem suits
723056 Spare or additional mini hood
728
TRELLCHE
HEMML
LIG
IGHT
HT T
Features
Light-weight and high comfort
BA worn outside of suit
Positive pressure suit
MED approved
Properties METHOD You can use the Trellchem Light with most standard
Abrasion resistance. EN 530, method 2 BA sets with supplementary air connections
Flex cracking ISO 7854, method B It is available in 2 sizes to give you a correct t
The polyamide fabric is coated on both sides and
Flex cracking at -30 Deg.?C ISO 7854, method B gives you excellent protection against alkalis, acids,
Trapezoidal tear resistance ISO 9073-4 oils, alchohols and aliphatics
Tensile strength ISO 13934-1 You will need to notify us which type of BA set you
have on board so we can advise on the correct hoses
Puncture resistance EN 863
and ttings
Resistance to ame EN 13274-4, method 3
Seam strength ISO 5082
Antistatic EN 1149-3, EN 1149-5
Ordering information
Product number Description Size Height Chest
538918 Trellchem Light T Chemical suits without hose Medium 136-188cm 92-100cm
538926 Trellchem Light T Chemical suits without hose Large 182-194cm 96-104cm
Accessories
L277 Repair kit for Light and Splash type Trellchem chemical suits
749861 Molykote grease for Chemical suits
669358 Unipack BA set hose with outlet for 2nd air unit
669366 Unipack BA set hose
749838 Viton butyl gloves for VPS/Super and Light Trellchem suits
605204 Trellchem hood for BA set protection
723056 Spare or additional mini hood
749846 Gloves for Trellchem Light and Splash chemical suits
571018 Size 42 Chemical safety boot
571026 Size 43 Chemical safety boot
571034 Size 44 Chemical safety boot
571042 Size 45 Chemical safety boot
729
TRELLCHE
HEMMV
VPPS T
T-E
-ETT
Features
Includes mini hood
High comfort
BA worn outside of suit
Positive pressure suit
MED approved
Properties METHOD You can use the VPS T-ET with most standard BA
Abrasion resistance. EN 530, method 2 sets with supplementary air connections
Flex cracking ISO 7854, method B It is available in 3 sizes to give you a correct t
Well proven combination of rubber and a multilayer
Flex cracking at -30 Deg.C ISO 7854, method B chemical barrier provides excellent chemical protec-
Tear resistance warp/weft ISO 9073-4 tion for over 8 hours against a wide range of
Tear resistance warp/weft ASTM D 2582 chemicals including war agents, as well as great
abrasion and ame resistance
Tensile strength ISO 13934-1
Notify us which type of BA set you have on board so
Burst Strength ASTM D 751 we can advise on the correct hoses and ttings
Puncture resistance EN 863
Seam strength ISO 5082 Meets the following standards:
Resistance to ignition EN 13274-4, method 3 NFPA 1991
Flammability resistance AST F 1358 EN 943-1 and EN 943-2/ET
EN 1073-2
EN 14126
Ordering information
Product number Description Size Height Chest
723023 Trellchem VPS T-ET with mini hood,without hose Small 170-182cm 88-96cm
723031 Trellchem VPS T-ET with mini hood,without hose Medium 136-188cm 92-100cm
723049 Trellchem VPS T-ET with mini hood,without hose Large 182-194cm 96-104cm
Accessories
739029 Repair kit for Trellchem VPS chemical suit
749861 Molykote grease for Chemical suits
669358 Unipack BA set hose with outlet for 2nd air unit
669366 Unipack BA set hose
749838 Viton butyl gloves for VPS/Super and Light Trellchem suits
605204 Trellchem hood for BA set protection
723056 Spare or additional mini hood
730
SAFETY Personal Protection
Chemical Protection
TRELLCHE
HEMMS
SPPLASH 600 S
SUUIT W
WIT
ITHO
HOUUT B
BOOOTS
Features
Non-encapsulating design
Can be used with BA set or lter masks
Elasticated legs, drawstring hood
Material Properties METHOD You can use the Light T with any standard BA sets
Abrasion resistance EN 530, method 2 you have on board
Flex cracking ISO 7854, method B It is available in 3 sizes to give you a correct t
The Trellchem Splash material is made of a strong
Flex cracking at -30 Deg.C ISO 7854, method B PVC coated fabric providing you with a soft and
Trapezoidal tear resistance ISO 9073-4 durable material
Tensile strength ISO 13934-1 It gives you good resistance to a wide range of
industrial chemicals, especially acids and alkalis
Puncture resistance EN 863
Resistance to ame EN 13274-4, method 3
Seam strength ISO 5082
Antistatic EN 1149-3, EN 1149-5
Ordering information
Product number Description Size Height Chest
723296 Trellchem Splash 600 Chemical without boots Size Small Small 170-182cm 88-96cm
723304 Trellchem Splash 600 Chemical without boots Size Medium Medium 136-188cm 92-100cm
723312 Trellchem Splash 600 Chemical without boots Size Large Large 182-194cm 96-104cm
Accessories
L27763 Repair kit for Trellchem Light and Splash chemical suits
749861 Molykote grease for chemical suits
749846 Gloves for Trellchem Light and Splash chemical suits
571018 Size 42 Chemical safety boot
571026 Size 43 Chemical safety boot
571034 Size 44 Chemical safety boot
571042 Size 45 Chemical safety boot
731
SAFETY Personal Protection
Chemical Protection
UNIP
NIPA
ACK HOHOSSE F
FOOR C
CHE
HEMIC
MICAAL S
SUUIT
ITSSS
SUUPER/V
/VPPS/
LIG
IGHT
HT S
SUUIT O
ONL
NLY
YCCO
ONNE
NNECCTIO
ION
N
391 669366
Features
Bayonet tting
For Trellchem Super/VPS/Light Chemical suits
Benets
Simple click and go
You can standardise your Unipack BA set even if you have different suits on board with the same tting
UNIP
NIPA
ACK HOHOSSE F
FOOR C
CHE
HEMIC
MICAAL S
SUUIT
ITSSS
SUUPER/V
/VPPS/
LIG
IGHT
HT S
SUUIT A
AND
ND R
REESCUE MA
MAS SK C
COONNE
NNECCTIO
IONS
NS
391 669358
Features
Bayonet tting
For Trellchem Super/VPS and Light type chemical gas tight suits
Benets
Simple click and go
You can standardise your Unipack BA set even if you have different suits on board with the same tting
732
SAFETY Personal Protection
Chemical Protection
CHE
HEMIC
MICA
AL S
SUUIT S
SAAFETY B
BOOOTS
Features
Steel toe cap and midsole
Anti-static
Cold insulating
Available in sizes 42 to 45
Benets
Yellow to identify with chemical clothing
Resistant to minerals, animal and vegetable oils and fats, disinfectants and various chemicals
Ordering information
Product number Description
571018 Size 42 Chemical Suit safety boot
571026 Size 43 Chemical Suit safety boot
571034 Size 44 Chemical Suit safety boot
571042 Size 45 Chemical Suit safety boot
733
SAFETY Personal Protection
Chemical Protection
TRELLCHE
HEMMCCHE
HEMIC
MICAAL S
SUUIT HO
HOOOD F
FOOR
FACEMA
MASSK & B
BAAS
SEET
394 605204
Features
Gives protection to BA sets
Re-usable
Does not impede when working
Benets
It is tted with a long zip in one side to can put on
easily and quickly
There are two slit openings on the chest to allow you to read the gauge
You exhale your air through an outlet valve in the back of the hood
TRELLCHE
HEMMC
CHE
HEMIC
MICAAL S
SUUIT MINI HO
HOOOD
394 723056
Features
Increases head protection
For use on VPS/Super/Light Trellchem chemical suits
Soft, exible polyamide fabric coated with PVC
Benets
Increases your head protection from rear sprays or leakages
It is light-weight and exible, providing unrestricted head movement
The wide face aperture will not restrict your vision
734
SAFETY Personal Protection
Chemical Protection
GLOVES, V
VIT
ITO
ON/B
N/BU
UTYL F
FOOR T
TRRELLCHE
HEMMV
VPPS &
SUPER
394 749838
Features
Simple to replace onboard
Provide abrasion resistance
Include the bayonet ring
DESIGN 5-nger protective rubber glove with rolled cuff. Carrying a spare set maintains operational readiness
MATERIAL Butyl rubber with an outer layer of Viton rubber of your chemical suits
THICKNESS 0.80 mm (nominal) The VPS/Super and Light bayonet system allows you
to replace gloves quickly and easily
LENGTH 35 cm They are soft and exible allowing you to carry out
COLOUR Black most tasks
These outer barrier gloves protect your hands from
abrasions and ensure your suit remains gastight
735
SAFETY Personal Protection
Chemical Protection
GLOVES P
PVVC F
FOOR T
TRRELLCHE
HEMML
LIG
IGHT
HT A
AND
ND S
SPPLASH
394 749846
Features
Good grip
Good abrasion & weather resistant
Very good chemical resistance
Benets
The roughened palm areas will improve your grip
A combination of nitrile rubber and Chloroprene rubber ensure you get excellent working properties even in cold
weather
The material also gives you good resistance against most chemicals
736
SAFETY Personal Protection
Chemical Protection
CHE
HEMIC
MICA
AL S
SUUIT R
REEPAIR K
KIT
ITS
S
Features
Comprehensive kits
3 types
Benets
Comprehensive kits allow you to make repairs to
perforations
All pressurised suits have their own type of kit
Ordering information
Product number Description
739029 Repiar kit for Trellchem chemical suits type VPS - chloroprene rubber
L39499 Repair kit for Trellchem chemical suit type Super - Viton material
L27763 Repair kit for Trellchem chemical suits type Light/Splash 600 - PVC materials
737
SAFETY Personal Protection
Chemical Protection
MO
MOLLYKOTE G
GRREASE F
F//O-R
-RING
ING B
BAAYONE
NETTS
SY
YSTEM
394 749861
Molykote grease protects against salt water damage ensuring continual use.
Features
For use on glove bayonet systems on chemical suits
Benets
Ensures your connections are smooth when required
Technical data
Color White
Density 1.02 grams per cc
Dropping Point 250 Deg C
Kinetic / Kinematic Viscosity 200 Centistokes
NLGI Number 2 to 3
Service Temperature (High) 180 Deg C
Service Temperature (Low) -50 Deg C
Shelf Life 1800 Days
Worked Penetration 245 mm/10 to 275 mm/10
738
SAFETY Personal Protection
Head Protection
HE
HEAAD P
PRROTECTIO
IONN
Features
2 types of helmets, both with Staz-On suspension as
standard
Separate or snap on hearing, visual accessories to
suit either helmet
Head warmers for colder climate working
Chin straps for helmet retention
Benets
Both helmets are lightweight but strong, giving your head freedom of movement and the brimless design of the
Linesman makes it ideal for you to use in chemical suits also
Whether you want separate or snap on hearing or eye protection all accessories are suitable for use with our range
of helmets
Additionally our range helmets meet the requirements for electrical insulation and low temperature use offering you
higher levels of protection
The built in Staz-On suspension increases your level of head protection by absorbing knocks and bangs through the
harness
Ordering information
Product number Description
736520 V Guard helmet white with Staz on suspension
736538 V Guard helmet yellow with Staz on suspension
736546 Linseman helmet white with Sraz on suspension
736553 Linesman helemt yellow with Staz on suspension
Accessories
Product number Description
738989 Chinstrap webbing
739912 Stow-away Safety Visor - Clear
739003 Winter liner c/w Zip,knitted cape
736595 Ear Muff Type EXC passive helmet mounted
736587 Earmuff type EXC passive with headband
739
SAFETY Personal Protection
Head Protection
HE
HEAAD P
PRROTECTIO
IONNA
AC
CCESSORIE
IESS
Features
Increase safety
Improve comfort
Benets
Chin straps and visors increase the levels of safety
whilst not hampering the overall performance of the helmet
Improved comfort from the winter liners to keep you warm during cold climate working
All accessories are designed to be light-weight and non-restrictive to give you free head movement
Accessories
Product number Description
738989 Chinstrap webbing for V guard and Linesman helmets
739912 Safety visor for V Guard and Linesman helmets
739003 Winter liner with zip and knitted cape for V Guard and Linesman helmets
736595 Ear Muff Type EXC passive helmet mounted
736587 Earmuff type EXC passive with headband
740
SAFETY Personal Protection
Hearing Protection
HE
HEAARING P
PRROTECTIO
IONN
Features
Adjusters to t sizes and helmets
Unique moulded inserts
Can be equipped with visors
Benets
We offer a wide range to suit personal preferences and comfort levels
Light-weight and slim design gives good freedom of movement
Designed over many years of experience of customer usage to ensure your protection
Our range of helmets, visors and hearing protectors compliment each other, standardising your vessels equipment
Ordering information
Product number Description
736587 Ear Muffs with headband
736595 Ear muff for V Guard & Linesman helmet mounts
736603 Disposable Ear plugs non corded 200 per box
741
SAFETY Personal Protection
Personal Fire Protection
UNIT
NITO
OR F
FLLAME
MEGGUARD P
PLLUS F
FIR
IRE
EFIG
IGHT
HTE
ER S
SUUIT K
KIT
IT
The Unitor Flameguard Plus aluminised proximity suits are designed for rescue operations and re
ghting where you are operating in temperatures ranging from 800-1000 Celsius. The outer layer of
aluminised fabric helps prolong your re ghting operations as it reects more than 90% of the heat.
Additionally you can complete your reghter requirements from our range of breathing apparatus and
rescue equipment.
Features
The Flameguard Plus kit is a Ships Wheel and SOLAS approved remans outt comprising of helmet, jacket, trousers,
gloves and non-conductive gloves.
Ordering information
Product number Description Height Chest Waist Inside leg
775106 Unitor Flameguard MED 164-182cm 84-104cm 84-104cm 74cm
775114 Unitor Flameguard Large 170-188cm 96-116cm 96-116cm 79cm
775122 Unitor Flameguard XL 179-194cm 112-132cm 112-132cm 84cm
775130 Unitor Flameguard Size XXL 180-198cm 122-142cm 122-142cm 85cm
766803 Boots Size 41
766804 Boots Size 42
766805 Boots Size 43
766806 Boots Size 44
766807 Boots Size 45
766808 Boots Size 46/47
Approvals
MED approved
742
SAFETY Personal Protection
Personal Fire Protection
UNIT
NITO
OR F
FLLAME
MEGGUARD S
SOOLAS F
FIR
IRE
EFIG
IGHT
HTE
ER S
SUUIT
Features
Latest approvals
New technology materials
Complete kit for non-MED vessels including suit,
boots, helmet and gloves
Benets
This suit has recently been approved so will give you compliance for years to come
New materials which improve the bonding of aluminium and the cotton backing provides a longer product life and
improved levels of usage performance
The large is generously sized and with the braces and adaptable closures will cover a large proportion of your crew
particularly if you change them regularly
Ordering information
Product number Description Height Chest Waist Inside leg
775148 Unitor Flameguard Solas Med 164-182cm 164-182cm 164-182cm 74cm
775155 Unitor Flameguard Solas Large 170-188cm 96-116cm 96-116cm 79cm
775163 Unitor Flameguard Solas XL 176-194cm 112-132cm 112-132cm 84cm
775171 Unitor Flameguard Solas XXL 180-198cm 122-142cm 122-142cm 85cm
777464 Solas Fire ghters Boots Size 41
777465 Solas Fire ghters Boots Size 42
777466 Solas Fire ghters Boots Size 43
777467 Solas Fire ghters Boots Size 44
777468 Solas Fire ghters Boots Size 45
777469 Solas Fire ghters Boots Size 46
777470 Solas Fire ghters Boots Size 47
743
UNIT
NITO
OR F
FIR
IRE
EBUDDY P
PLLUS F
FIR
IRE
EFIG
IGHT
HTE
ER S
SUUIT K
KIT
IT
Features
The Firebuddy Plus suit is a two-piece garment with a four-layer construction
The jacket has a stand up collar, elasticated cuffs, and is closed by a zip covered by an overlapping front with touch
and close fastening to the front and collar
The trousers have wide elasticated braces with adjusters and quick-release buckles
MED approved. Gloves,boots(ordered separately) and helmet EN approved in accordance with MED Ships Wheel
Benets
The 4 layer construction ensures thermal protection whilst providing you with high comfort factors using breathable
materials
Our softer materials even with 4 layers give you exible movement which is a crucial element when you need to enter
conned spaces or be physically active
The touch and close fastening and elasticated trouser braces allow you to don the suit quickly
Our suit sizing is generous allowing you the choice to wear additional clothing
Ordering information
Product number Description Height Chest Waist Inside leg
775620 Unitor Firebuddy Plus Kit Med 164-182cm 84-104cm 84-104cm 74
775621 Unitor Firebuddy Plus kit Large 170-188cm 96-116cm 96-116cm 79
775622 Unitor Firebuddy Plus kit XL 176-194cm 112-132cm 112-132cm 84
775623 Unitor Firebuddy Plus kit XXL 180-198cm 122-142cm 122-142cm 85
766803 MED Approved Fire ghters Boots Size 41
766804 MED Approved Fire ghters Boots Size 42
766805 MED Approved Fire ghtersBoots Size 43
766806 MED Approved Fire ghters Boots Size 44
766807 MED Approved re ghters Boots Size 45
766808 MED approved Fire ghters Boots Size 46/47
744
SAFETY Personal Protection
Personal Fire Protection
FIR
IREEMA
MANS
NS HE
HELLME
METT-P
PA
AB HT
HT04
04
394 774943
Features
Includes visor and neck curtain
Light-weight and high comfort
Visor approved for use in res
MED approved
Benets
You can use with any marine re ghting kits onboard your vessel
Visor folds inside helmet when not used for added protection and is not in your line of vision
The helmet and visor both give you high impact resistance for clearing debris or during re ghting operations
The generous sizing of 52 to 63 cm will cover the majority of your crew sizes
Ordering information
Product number Product name
774943 Firemans Helmet - PAB HT04
777538 LED Lamp for PAB Fire ghters helmet
777539 LED Lamp holder for PAB re ghters helmet
745
SAFETY Personal Protection
Personal Fire Protection
LED L
LAAMP F
FOOR F
FIR
IRE
EMA
MAN
N HE
HELLME
METTP
PA
AB
394 777538
Features
Simple click t
Light-weight
ATEX approved
Battery type 4 AA Alkaline / LR6 You simply click it into the holder on your helmet
Output time 4-5 hours It is extremely lightweight so does not restrict or
Beam distance 99.97 metres reduce your head movement
It is approved for use in hazardous zones so you can
use it during rescues as well as re ghting duties
Ordering information
Product number Product name
774943 Firemans Helmet - PAB HT04
777538 LED Lamp for PAB Fire ghters helmet
777539 LED Lamp holder for PAB re ghters helmet
Approvals
Meets the following American standards: CL I, DIV 2, GP A, B, C, D, CL II, DIV 2 GP F, G, CL
III, DIV 2 T4'
UL (US, Canada) approved UK4AA-AS2ZM
746
CABINE
INETTF
FOOR F
FIR
IRE
EFFIG
IGHT
HTE
ERS O
OUUTFIT
394 592576
Features
GRP
Stainless steel hinges and ttings
Waterproof
Clear labelling
747
SAFETY Personal Protection
Personal Fire Protection
FIR
IREEA
AXXE W
WIT
ITH
H INS
INSUULATED HA
HAND
NDL
LE 2 K
KV
V
394 534958
Features
Insulated handle
Corrosion resistant
Ergonomic grip
Benets
Non-ageing insulated handle for longer life giving you
excellent protection
It is impact proof so will not shatter when you are
tackling solid metals
The axe head is SAE1055 steel a proven workhorse of the rescue industry
Accessories
Product number Description
525519 Leather Fire Axe cover
534966 Wall brackets
COVER F
FOOR F
FIR
IRE
EAAX
XE
394 525519
Features
Suits products 525535/176842/755314
Toughened leather
Benets
Can be used in storage or attached to your waist belt
Prevents accidents when working whilst also giving
instant access
Riveted seams provide longer life and increased durability
748
SAFETY Personal Protection
Personal Fire Protection
GLOVES F
FOOR F
FIR
IRE
EBUDDY P
PLLUS F
FIR
IRE
EFIG
IGHT
HTE
ER S
SUUIT
392 775361
Features
Water resistant leather made from outer cow split
suede
Knitted wrist with kevlar cufng
Aramid kevlar lined with Hipora moisture barrier
Light-weight of 250 g
Benets
You can wash these gloves with your clothing after use
Multi-sized will t most, ensures most of your crew can wear them
A knitted wrist ts well into your outt and will keep your hands dry
The leather is a soft feel making these gloves comfortable to wear
Approvals
Tested and approved to EN659 and Marine Equipment Directives 98/85/EC, 2002/75/EC and 2002/84/ EC also
Directive (MED) 96/98/EC as modied by Commission covered by PPE Council Directive 89/686/EC.
749
SAFETY Personal Protection
Personal Fire Protection
FIR
IREEFIG
IGHT
HTE
ERS S
SUUIT INS
INSUULATED G
GLLOVES
392 775379
Features
Full compliance with the EN 60903 and IEC 60903 as they place in the high Class 00
Good heat insualtion
Benets
Used in conjunction with your reghter outt they will protect against electric shocks
They are particularly useful when using an insulated axe for cutting through cables
As an added benet when re ghting they also offer extremely good heat insulation
750
SAFETY Personal Protection
Personal Fire Protection
SOLAS F
FIR
IRE
EFIG
IGHT
HTE
ER B
BOOOTS
Features
For use only on SOLAS approved reghter suits
Generously sized
Protective toe cap to EN20345
Sanitised linings
Benets
Approved to EN20345 ensures the quality of these boots to be used on your non-MED reghter outts
Flexible uppers give you good levels of comfort and freedom of movement
The sole pattern gives you good grip when climbing ladders or working on wet surfaces
The sanitised linings help reduce foot odours
Ordering information
Product number Description
777464 Solas Fire ghters boots Size 41
777465 Solas Fire ghters boots Size 42
777466 Solas Fire ghters boots Size 43
777467 Solas Fire ghters boots Size 44
777468 Solas Fire ghters boots Size 45
777469 Solas Fire ghters boots Size 46
777470 Solas Fire ghters boots Size 47
751
SAFETY Personal Protection
Personal Fire Protection
FIR
IREEFIG
IGHT
HTE
ER B
BOOOTS - ME
MEDDA
APPPROVED
Features
Fire-proof nitrile rubber
Polymer toe cap
Composite antiperforation mid-sole
Chemical resistance
Benets
These boots are suitable for your emergency situations, re ghting or incidents involving the release of hazardous
chemicals
They give protection against numerous other hazards including fuels, greases, solvents, weak and diluted acids
They are a tough long lasting boot which boasts excellent resistance to cuts and abrasions
We also provide a good size range to choose from
Ordering information
Product number Description
766803 Fire ghters boots Size 41
766804 Fire ghters boots Size 42
766805 Fire ghters boots Size 43
766806 Fire ghters boots Size 44
766807 Fire ghters boots Size 45
766808 Fire ghters boots Size 46/47
Approvals
Complies with the following standards: EN 13832-3 J K R - boots highly resistant to
chemicals including, n-Heptane (J), Sodium
EN 15090 type 3 - boots suitable for emergency Hydroxide(K), Sodium Hypochloride (R)
situations or re involving release of hazardous
chemicals that can cause loss of life EN 13287 - Sole slip resistance (SRC) on ceramic
and steel ooring
EN20345 - S5 HRO SRC, heel energy absorption,
antistatic, contact heat resistance (HRO)
752
SAFETY Personal Protection
Personal Fire Protection
FIR
IREEFIG
IGHT
HTE
ER L
LIF
IFE
ELINE
Features
Galvanized steel cable IRWC 6 x 19, PP bre core 5
mm with a Trevira CS braiding
6.6kn breaking strength
Snap hook and karabiner ttings
Benets
In the event of a snag you can unclip quickly
These hard wearing lines will not wear away when rubbing against corners when you are moving around
They are suitable for use in your helideck rescue equipment
Ordering information
Product number Description Breaking strength
176826 30 metre Non combustible lifeline 6.6kn
176834 45 metre Non combustible lifeline 6.6kn
781575 60 metre Non combustible lifeline 6.6kn
780029 90 metre Non combustible lifeline 6.6kn
753
SAFETY Personal Protection
Portable Gas Detection
OXY, T
TO
OXI & G
GAAS-MA
-MAT
TE
Features
Rugged & robust IP65 dust ingress protection
High audible alarm with vibrate and visual dual colour
ashing LEDs
4800 event / alarm record with 900 hour capacity
Moulded rubber casing to withstand the toughest
marine environment
MED approved
Benets
With a market leading 4800 event data record you can be sure that safety and alarm records can be retrieved at the
touch of a button
Our unique one button operation is easy to use and allows you to keep your other hand free for other tasks
The rugged & robust design means that the unit is suitable for use in a marine environment
The lithium-ion battery gives you 12 hours of continuous use between charges
The audible, visual alarm, vibrate and condence blip allow you to concentrate on the job in hand
Ordering information
Product number Description
724880 Unitor Oxy-mate gas detector package O2 non-rechargable
724922 Unitor Oxy-mate gas detector package O2 rechargable
724948 Unitor Toxi-mate gas detector package for CO rechargable
724963 Unitor Toxi-mate gas detector package for H2S rechargable
724898 Unitor Toxi-mate gas detector package for H2S non-rechargable
724906 Unitor Toxi-mate gas detector package for CO non-rechargable
724989 Unitor Gasi-mate gas detector package for Ch4 rechargable
777540 Unitor Gasi-mate gas detector package for H2 rechargable
Accessories
Product number Product Description
725143 Carry Case
725127 Aspirator assembly (manual ball pump 2m hose)
656819 Aspirator hose 10m
656835 Aspirator probe 1m
656843 Aspirator probe telescopic - 1m
656876 Shoulder Strap for Oxy, Toxi & Gas-mate detectors
754
SAFETY Personal Protection
Portable Gas Detection
COMB
MBI-MA
I-MAT
TE
Features
Top mounted LCD display
Rugged & robust IP65 dust and water spray protection
Lithium-ion 12 hour rechargeable battery
High audible alarm with vibrate and visual dual colour ashing LEDs
1500 event / alarm record with 50 hour capacity
Moulded rubber casing to withstand the toughest marine environment
MED approved
Benets
Our unique one button operation make the Combi-Mate easy to use and allows you to keep your other hand free for
other tasks
The top mound display LCD display enables you to clip the unit to your person and have a good view of the screen
whilst having both hands free to work
The rugged & robust design enables the unit to oat if accidentally dropped in liquid
The audible, vibrate & visual alarm and condence blip allow you to concentrate on the job in hand
With a 1500 event data record you can be sure that safety and alarm records can be retrieved at the touch of a
button
The rugged construction ensures durability of your unit to continuously safeguard you in a marine environment
The built-in sampling pump allows you to detect harmful gases without having to enter the hazardous area
Ordering information
Product number Description
739413 Unitor Combi-mate gas detector package O2+CH4+H2S+CO with pump
708883 Unitor Combi-mate gas detector package O2+C4H10+H2S+CO with pump
708875 Unitor Combi-mate gas detector package O2+C4H10+H2S+CO with pump
724807 Unitor Combi-mate gas detector package O2+H2S+CO with pump
724765 Unitor Combi-mate gas detector package O2+CH4 with pump
724823 Unitor Combi-mate gas detector package O2+CH4+H2S with pump
709261 Unitor Combi-mate gas detector package O2+C5H124+H2S
719914 Unitor Combi-mate gas detector package O2+CH4+H2S+SO2 pumped
719641 Unitor Combi-mate gas detector package O2+C5H12+CO+NH3
755
Product number Description
709287 Unitor Combi-mate gas detector package O2+C5H12+CO
709253 Unitor Combi-mate gas detector package O2+C5H12
709609 Unitor Combi-mate gas detector package O2+CH4+CO+NH3
709279 Unitor Combi-mate gas detector package O2+C5H12+H2S
709295 Unitor Combi-mate gas detector package O2+C5H12+CO
709311 Unitor Combi-mate gas detector package O2+C5H12+H2S+CO
708834 Unitor Combi-mate gas detector package O2+H2S
708842 Unitor Combi-mate gas detector package O2+H2S
756817 Unitor Combi-mate gas detector package O2+C5H12+CO+NH3
New Unitor Combi-mate gas detector package O2+H2 with pump
New Unitor Combi-mate gas detector package O2+H2+CO with pump
new Unitor Combi-mate gas detector package O2+H2+PH3+AsH3+SiH4 with pump
Accessories
Product number Description
656918 Carry Case for Combi-mate
656884 Shoulder strap
656892 Chest harness kit for Combi-mate
656801 Aspirator assembly (manual ball pump 2m hose)
656819 Aspirator hose 10m
656835 Aspirator probe 1m
656843 Aspirator probe telescopic - 1m
657684 Drop line 6m
709428 Combi-mate gas test kit (non-pumped units) without gas cylinder
709436 Combi-mate gas test kit (pumped units) without gas cylinder
710087 Gas cylinder for Combi-mate gas test kit (CH4+O2+H2S+CO)
710954 Belt for Combi-mate carry case
708891 Calibration adaptor plate for Combi-mate non-pumped model
756
COMB
MBI-MA
I-MAT
TE 3
Features
Rugged & robust IP65 & IP67 dust and water ingress protection
Lithium-ion 16 hour rechargeable battery
High audible alarm with vibrate and visual dual colour ashing LEDs
3000 record and 1500 event / alarm record with 50 hour capacity
MED approved
Benets
Our unique one button operation make the Combi-Mate 3 easy to use and allows you to keep your other hand free
for other tasks
The top mounted LCD display enables you to clip the unit to your person and have a good view of the screen whilst
having both hands free to work
The rugged and robust design means that the unit is protected from dust and water common in a marine
environment
The audible, visual alarm, vibrate and condence blip allow you to concentrate on the job in hand
With a 1500 event data record you can be sure that safety and alarm records can be retrieved at the touch of a
button
Ordering information
Product number Description
725010 Unitor Combi-mate 3 Gas detector package for O2+CH4
725036 Unitor Combi-mate 3 Gas detector package for O2+CH4+H2S
725051 Unitor Combi-mate 3 Gas detector package for O2+CH4+CO
725077 Unitor Combi-mate 3 Gas detector package for O2+CH4+H2S+CO
Accessories
Product number Description
739101 Carry Case for Combi-mate 3
656900 Carry case and belt for Combi-mate 3
??? Chest harness kit for Combi-mate 3
739077 Aspirator assembly (manual ball pump 2m hose)
656819 Aspirator hose 10m
656835 Aspirator probe 1m
656843 Aspirator probe telescopic - 1m
657684 Drop line 6m
725135 Gas test kit for Combi-mate 3 without gas cylinder
656850 Water trap for aspirator hose
757
TANK
NK-MA
-MAT
TE
Features
Lithium-ion 12 hour rechargeable battery
High audible alarm with visual ashing bright LEDs
6000 event / alarm record with 100 hour capacity
Shatterproof casing to withstand the toughest marine environments
MED approved
Benets
The audible & visual alarm and condence blip allows you to concentrate on the job at hand
With a 6000 event data record you can be sure that safety and alarm records can be retrieved at the touch of a
button
The rugged construction ensures durability of your unit to continuously safeguard you in a marine environment
Ordering information
Product number Description
708867 / 708859 Unitor Tank-mate Gas detector package for O2+C4H10+Ir+H2S
709402 Unitor Tank-mate Gas detector package for O2+C5H12+CO
709386 Unitor Tank-mate Gas detector package for O2+C5H12+H2S
709360 Unitor Tank-mate Gas detector package for O2+C5H12
657882 / 657833 Unitor Tank-mate Gas detector package for O2+C4H10+Ir
709337 / 709329 Unitor Tank-mate Gas detector package for O2+CH4+Ir+H2S
656769 Unitor Tank-mate Gas detector package for O2+CH4+Ir
657841 Unitor Tank-mate Gas detector package for O2+C4H10+Ir+CO
709345 Unitor Tank-mate Gas detector package for O2+CH4+Ir+CO
New Unitor Tank-mate Gas detector package for O2+H2
New Unitor Tank-mate Gas detector package for O2+H2+PH3+AsH3
New Unitor Tank-mate Gas detector package for O2+CO2+Ir
New Unitor Tank-mate Gas detector package for O2+C2H2+Ir+NH3
Accessories
Product number Description
656900 Carry case and belt for Tank-mate gas detector
656819 Aspirator hose 10m
656827 Aspirator hose 20m
657866 Aspirator hose 30m
656835 Aspirator probe 1m
656843 Aspirator probe telescopic 1m
656850 Water trap for sampling hose
758
SAFETY Personal Protection
Portable Gas Detection
ASPIR
IRAATOR HO
HOSSE 10 M F
FOOR U
USSE W
WIT
ITH
HUUNIT
NITO
OR G
GAAS
DETECTORS
381 656819
This is a 10 metre aspirator hose that you can use with the Unitor aspirator assembly for Unitor gas
detectors.
Features
Flexible rubber hose
Benets
Can be used with any Unitor Oxy, Toxi or Gas-Mate detectors
ASPIR
IRAATOR HO
HOSSE 20 M F
FOOR U
USSE W
WIT
ITH
HUUNIT
NITO
OR
GAS D
DEETECTORS
381 656827
This is a 20 metre aspirator hose that you can use with the Unitor aspirator assembly for Unitor gas
detectors.
Features
Flexible rubber hose
Benets
Can be used with any Unitor Combi-Mate gas detectors
759
SAFETY Personal Protection
Portable Gas Detection
ASPIR
IRAATOR P
PRROBE 1 M F
FIX
IXE
ED F
FOOR G
GAAS D
DEETECTIO
IONN
381 656835
Features
Stainless steel construction
Benets
Can be used with any Unitor aspirator
Allows for safe remote sampling
ASPIR
IRAATOR P
PRROBE, T
TEELESCOPIC - 1 M
381 656843
Features
Stainless steel construction
Telescopic adjustment
Benets
Can be used with any Unitor aspirator
Allows for safe remote sampling
760
SAFETY Personal Protection
Portable Gas Detection
ASPIR
IRAATOR A
ASSSEMB
MBLLY S
SING
INGL
LE G
GAAS MO
MONIT
NITO
OR
381 725127
Hand pumped aspirator assembly for use with personal single gas monitors Oxy-Mate Toxi-Mate and
Gas-Mate detectors when needing to carry out remote sampling without entering the testing area.
Features
Manual ball pump
Rubber construction
Benets
Designed for use with Unitor single gas detectors
Allows for remote safe sampling
ASPIR
IRAATOR AAS
SSEMB
MBLLY NO
NON-P
N-PU
UMP
MPE
ED U
UNIT
NITO
OR
COMB
MBI-MA
I-MAT
TE G
GAAS D
DEETECTOR
381 656801
The hand pumped aspirator assembly can be used with the Unitor Combi-Mate personal gas detector
when needing to carry out remote sampling without entering the testing area.
Features
Manual ball pump
Rubber 2 metre hose
Benets
Designed for use with Unitor Combi-Mate gas detectors
Allows for safe remote sampling
761
SAFETY Personal Protection
Portable Gas Detection
ASPIR
IRAATOR A
ASSSEMB
MBLLY F
FOOR U
UNIT
NITO
OR C
COOMB
MBI-MA
I-MAT
TE 3
GAS D
DEETECTOR
381 739077
Features
Manual ball pump
Rubber 2 metre hose
Benets
Designed for use with Unitor Combi-Mate gas
detectors
Allows for safe remote sampling
WATERTRAP F FOOR U
USSE W
WIT
ITH
HGGA
AS D
DEETECTIO
IONN
ASPIR
IRAATOR T
TUUBE
381 656850
Features
Rigid clear plastic construction
Replaceable lter
Water line sight glass
Benets
Made from strong plastic that will not easily break
Clear plastic enables you to see any liquid in the line
Water line sight glass prevents too much liquid build up
Replacement lters increase the lifespan of the product
762
GAS-T
-TE
EST K
KIT
IT,, F
FOOR U
UNIT
NITO
OR C
COOMB
MBI-MA
I-MAT
TE P
PUUMP
MPEED
UNIT W
WIT
ITHO
HOU UT G GAAS C
CYYLIND
INDEER
381 709436
Features
Connection place for connection leak tight
connection to Combi-Mate
Flexible rubber hose
Trigger operation
Pressure gauge
Benets
Moulded connection plate ensures a leak tight seal
Flexible rubber hose ensures no leakage of calibration gas
Single trigger operation ensures that there is no wastage of calibration gas
Pressure gauge ensures that the correct pressure of calibration gas is used every time
Test kit is interchangeable with all Unitor span gas cylinder available globally
GAS T
TEEST K
KIT
IT F
FOOR C
CO
OMB
MBI-MA
I-MAT
TE 3
381 725134
Features
Connection place for connection leak tight
connection to Combi-Mate
Flexible rubber hose
Trigger operation
Pressure gauge
Benets
Moulded connection plate ensures a leak tight seal
Flexible rubber hose ensures no leakage of calibration gas
Single trigger operation ensures that there is no wastage of calibration gas
Pressure gauge ensures that the correct pressure of calibration gas is used every time
Test kit is interchangeable with all Unitor span gas cylinder available globally
763
SAFETY Personal Protection
Portable Gas Detection
CARRY CCA
ASE F
FOOR O
OX
XY, T
TO
OXI & G
GAAS-MA
-MAT
TE S
SING
INGL
LE
GAS P
POORTABLE GGA
AS D
DEETECTOR
381 725143
Features
Made from durable leather
Specially designed to t Unitor single gas detectors
Plastic viewing window
Benets
Protects the unit from wear and tear
Fits perfectly around Unitor single gas detectors
Prolongs the life of you gas detector
CARRY CCA
ASE F
FOOR U
UNIT
NITO
OR C
COOMB
MBI-MA
I-MAT
TE P
POORTABLE
GAS D
DEETECTOR
381 656918
Features
Made from durable leather
Specially designed to t Unitor Combi-Mate gas detectors
Plastic viewing window
Benets
Protects the unit from wear and tear
Fits perfectly around Unitor Combi-Mate gas detectors
Connects with Unitor carry strap or chest harness
Prolongs the life of you gas detector
764
SAFETY Personal Protection
Portable Gas Detection
CHE
HESST HA
HARRNE
NESSS K
KIT
IT F
FOOR U
UNIT
NITO
OR C
COOMB
MBI-MA
I-MAT
TE
GAS DDE
ETECTOR
381 656892
Features
Made from durable nylon
Toughened plastic clips
Adjustable straps
Benets
Durable nylon ensures that the harness will not break
under strain
Tough plastic clips ensure that the unit is secured in position
Adjustable straps ensure a comfortable t for the user
CARRY C
CAASE F
FOOR U
UNIT
NITO
OR C
COOMB
MBI-MA
I-MAT
TE 3
PORTABLE GGA
AS DDE
ETECTOR
381 739101
A specially designed carry case which allows you to connect it to our specially designed chest harness,
shoulder strap, belt or simply be used as a protector for your Combi-Mate 3 gas detector.
Features
Made from durable leather
Specially designed to t Unitor Combi-Mate gas detectors
Plastic viewing window
Benets
Protects the unit from wear and tear
Fits perfectly around Unitor Combi-Mate gas detectors
Connects with Unitor carry strap or chest harness
Prolongs the life of you gas detector
765
CARRY CCA
ASE A
AND
ND B
BEELT F
FOOR U
UNIT
NITO
OR T
TA
ANK
NK-MA
-MAT
TE
GAS D
DEETECTOR
381 656900
Features
Made from durable leather
Specially designed to t Unitor Combi-Mate gas
detectors
Plastic viewing window
Benets
Protects the unit from wear and tear
Fits perfectly around Unitor Combi-Mate gas
detectors
Connects with Unitor carry strap or chest harness
Prolongs the life of you gas detector
766
FALL A
ARRREST D
DEEVIC
ICEES
Features
Range of harnesses in either basic or specialist ATEX
versions
Conned space entry and rescue systems
Work positioning solutions
Fall arrest devices
Benets
Our range will cover the majority of standard requirements for onboard your vessels
Quality products to give you compliance and meet health & safety requirements
Solutions for more hazardous or specialist applications can be quoted
Advice and support from our global network of sales ofces
Ordering information
Product No Description
777611 Harness kit complete with lanyard
777603 Full body harness with rear attachment
777615 Full body harness front and rear attachment ATEX approved
777612 Fall Arrest 2 metre elasticated lanyard energy absorbing lanyard with scaffold hook
777613 Fall Arrest 1.8 metre elasticated energy absorbing lanyard 2 standard hooks
777604 Work positioning belt
777606 Fall Arrest Aluminium Tripod
777605 Fall Arrest Winch with 15 metre cable for Tripod
777607 Fall Arrest Bracket for winch
777608 Fall Arrest Bag for Tripod and winch
767
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!*'&"6*.(60%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!*'&"6*.(60%'9*%
93/52$&0"(&
SAFETY
LIFE SAVING
CABINE
INETTS
Features
GRP, ABS or PE materials
Stainless steel, plastic or polythene hinges and ttings dependant on type of cabinet and area of storage
All are waterproof, hard wearing and colour fast
Clear labelling denes usage
Benets
Materials and design features best suited to your storage area
Options include oor or wall mounted enabling you to maximise your storage space
For total protection of your equipment some cabinets offer you internal ttings as standard
Ordering information
Product number Description
Fire ghting Storage Cabinets
234773 Ship to Shore ttings cabinet
234799 18 metre re hose and ttings cabinet
605279 20 metre re hose and ttings cabinet
758557 25 metre re hose and ttings cabinet
723064 Fire extinguisher 6kg to 9kg cabinet
766827 Fire extinguisher 6kg - 9kg and 5kg Co2 cabinet
546689 Helideck emergency equipment cabinet
592576 Fire man's outt cabinet
737320 Foam emergency station cabinet
Lifesaving Appliance Cabinets
576603 lifejacket or Immersion suit box small
576611 Lifejacket or immersion suit box medium
576629 Lifejacket or immersion suit box large
576637 Lifejacket or immersion suit box XL
546564 Safety plan container
638395 Emergency Equipment Breathing Device cabinet
Special sizes, colours, approvals can be quoted on request
770
HY
HYDDROSTATIC R RE
ELEASE U
UNIT
NIT HA
HAMMA
MMAR
R H20 F
FOOR
LIF
IFEERAFTS 2 Y
YEEAR
805 750751
Features
2 year lifespan
Operates from 1.5 - 4 metres
Fits any installation
Vacuum and electric release systems available
Benets
You do not have to service these units
When the 2 years is expired you dispose of them
Comes complete with easy to understand
instructions so your crew can install them
Global service, local support
Approvals
MED approved
771
HY
HYDDROSTATIC R RE
ELEASE U
UNIT
NIT D
DKK2004 F
FOOR
LIF
IFEERAFTS 4 Y
YEEAR
805 777869
The DK2010 4 year disposable hydrostatic release unit offers you excellent value through an extended
lifespan.
It is easy to install and approved by the worlds leading maritime authorities and of particular use when
you use 30 month service liferafts.
Manufactured from high grade materials to withstand the rigours of the marine environment the
DK2010 offers you exceptional value.
Features
4 year lifespan
Operates from 1.5 - 4 metres
Fits any installation
Electric release systems available
Benets
You do not have to service these units
When the 4 years is expired you dispose of them
Comes complete with easy to understand instructions so your crew can install them
Global service Local support
Approvals
MED approved
772
SAFETY Life Saving Appliances
Immersion Suits
IMME
IMMERRSIO
IONNS
SUUIT
ITSS
Features
Sizes to cover heights from 135 - 210 cm
Glued, stitched and heat taped seams
Colour coded stowage bags
MED approved
Benets
You can choose from a standard non-pillow version and use your existing life jackets or a pillow version for quicker
for donning times
High manufacturing standards provide you with secure in water thermal properties and a long life product
To support your maintenance programmes we provide an onboard test kit with all the parts required to test and
repair your suits
Ordering information
Product number Description
740464 V20 Height 130-150cm 5mm insulation with light
728592 V20 Height 160-185cm 5mm insulation with pillow
671602 V20 Height 165-190cm 5mm insulation with pillow
671610 V20 Height 185-210cm 5mm insulation with pillow
728584 V40 Height 160-185cm 7mm insulation with pillow
671628 V40 Height 165-190cm 7mm insulation with pillow
671636 V40 Height 185-210cm 7mm insulation with pillow
728600 V20 OP Height 160-185cm 5mm insulation non pillow type
719435 V20 OP Height 165-190cm 5mm insulation non pillow type
719443 V20 OP Height 185-210cm 5mm insulation non pillow type
Ancillaries
758201 Immersion suit Test Kit
777423 W3 light for V20 & V40 suits
576603 Cabinet for 6 lifejacket or 4 Imm suits
576611 Cabinet for 18 lifejackets or 8-10 Immersion suits
576629 Cabinet for 24 lifejackets or 12 Immersion suits
576637 Cabinet for 32 lifejackets or 16 Immersion suits
773
SAFETY Life Saving Appliances
Immersion Suits
RESCUE S
SUUIT
820 763359
The GT100 is a 1-hour Thermal Protective Aid (SOLAS 34 TPA) which you can use for rescue
operations or as a constant wear suit. You can quickly don the suit using the watertight main zipper
single-handedly.
The attached hood gives you additional thermal retention and the high length safety boots include steel
toe caps for your added protection.
Features
3 layer tear proof breathable nylon fabric
Integral suspenders
Generous sizing
Approved to MED B-1140 as a 1 hour Thermal Protective aid
Benets
The new orange 3 layer material is breathable preventing the build-up of moisture in the suit making it extremely
comfortable for you to wear during long periods
We include adjustable suspenders on the inside of the suit so you enjoy a better t reducing chafng during high
physical activity
The generous sizing and adjustable suspenders give you freedom of movement
The MED approval as a one hour suit is testament to the suit's ability for use during rescue operations or working in
cold environments
Ordering information
Product number Description Height Boot size
763359 GT100 Rescue suit size small, 166-174cm 42
763367 GT100 Rescue suit size medium 170-178cm 43
763375 GT 00 Rescue suit size large 174-174cm 44
763383 GT100 Rescue suit size Extra large 182-188cm 45
774
SAFETY Life Saving Appliances
Life Jackets and Lights
LIF
IFEEJACKET A
ANC
NCIL
ILLLARIE
IESS
Features
ISO and SOLAS compliant life jackets and ancillaries
Full spares and ancillary options
Tailored solutions
Benets
Our list of spares and accessories covers from life jacket repacking to meeting hazardous environments with our new
range of personal safety lights
We work closely with our suppliers to tailor solutions to meet your individual requirements
Our life jacket range is supported throughout our service network globally so you can always be assured of efcient
service and spare parts supply
Ordering information
Product number Description
777804 L6A-EX ATEX life jacket light
777423 W3 auto life jacket light
552190 IMO sign Inatable lifejacket
632737 Recharge kit for Offshore 150n Solas Twin chamber lifejacket
632752 Recharge kit for Interlock 275n Solas Twin chamber life jacket
632745 Recharge kit for Worksafe ISO 150n Single chamber lifejacket
754838 Halkey roberts Super bobbin for auto lifejackets
775
SAFETY Life Saving Appliances
Life Jackets and Lights
INF
INFLLATABLE L
LIF
IFE
EJACKETS
Features
ISO and SOLAS compliant life jackets
Full spares and ancillary options
Tailored solutions
Global service, local support
MED approved
Benets
We give you a wide choice of working single
chamber life jackets or twin chamber SOLAS life jackets
Our list of spares and accessories covers from life jacket repacking to meeting hazardous environments with our new
range of personal safety lights
We work closely with our suppliers to tailor solutions to meet your individual requirements
Our life jacket range is supported throughout our service network globally so you can always be assured of efcient
service
Ordering information
Product number Description
769687 Challenger Interlock Solas Inatable 275N
769679 Challenger Flexi wing Solas inatable 150N
623703 Challenger Worksafe Inatable ISO 150n
777804 L6A-EX ATEX life jacket light
777423 W3 auto life jacket light
552190 IMO sign Inatable lifejacket
632737 Recharge kit for Offshore 150n Solas Twin chamber lifejacket
632752 Recharge kit for Interlock 275n Solas Twin chamber life jacket
632745 Recharge kit for Worksafe ISO 150n Single chamber lifejacket
776
SAFETY Life Saving Appliances
Life Jackets and Lights
UNIT
NITO
OR S
SEEAGUARD L
LIF
IFE
EJACKETS
Features
Approved to MSC81(70) July 2010
150n adult buoyancy rating
Infant to adult chest sized up to 75 cm as standard
Compact size
MED approved
Benets
Our approval gives you the ability to meet the
additional life jackets required under later regulations
The 150n minimum buoyancy and unitary block design gives you far superior in-water performance
Our 75 cm chest size as standard means you not having to carry additional extension belts or specially sized life
jackets on board
Even with 150n buoyancy it remains a compact size when folded and will t into many of your existing lockers
Ordering information
Product number Description
764548 Seaguard 2010 Adult without light
764555 Seaguard 2010 Child without light
764837 Seaguard 2010 Infant without light
764977 Seaguard 2010 Adult with light
764978 Seaguard 2010 Child with light
764979 Seaguard 2010 Infant with light
777423 W3 Auto MED/USCG Lifejacket light
777804 L16AX ATEX MED/USCG Lifejacket light
552190 IMO Sign Adult lifejacket
552208 IMO Sign Childs lifejacket
Storage Cabinets
576603 6 life jackets storage cabinet
576611 18 life jackets storage cabinet
576629 24 life jackets storage cabinet
576637 32 life jackets storage cabinet
777
SAFETY Life Saving Appliances
Lifebuoys, bracket, lines and light
LIF
IFEEBUOY'S A
AND
ND A
ANC
NCIL
ILLLARIE
IESS
Features
Storage cradles and brackets
Buoyant lines from 30 to 50 metre length
MED approved
Benets
We offer two sizes of approved lifebuoy so you can standardise on one make on board
We offer a range of storage options to suit your vessels requirements
Whether you require ATEX approved for tanker use or standard lifebuoy lights we offer a full range
Ordering information
Product number Description Use
637991 30" 2.5kg lifebuoy General
638007 30" 4kg lifebuoy For tting to an MOB smoke and light
Accessories
Product number Product name
777805 LIFEBUOY LIGHT L160 MED
777803 LIFEBUOY LIGHT L162 USCG
768408 LIFEBUOY LIGHT L161 ATEX/IECEx
777802 LIFEBUOY LIGHT L163 ATEX/IECEX/USCG
777801 LIFEBUOY LIGHT L16 X ADPTER PLATE
576702 LIFEBUOY LIGHT L90 WITH BATTERY
735985 Y BRACKET FOR LIFEBUOY
606210 FLOATING LIFELINE 50MTR
606209 FLOATING LIFELINE 45MTR
606208 FLOATING LIFELINE 30MTR
606206 RETROREFLECTIVE SOLAS TAPE (MED)
552240 IMO SIGN F/LIFEBUOY
552273 IMO SIGN F/LIFEBUOY W/
552257 IMO SIGN F/LIFEBUOY W/
552265 IMO SIGN F/LIFEBUOY W/
778
SAFETY Life Saving Appliances
Lifebuoys, bracket, lines and light
LIF
IFEEBUOY L
LIG
IGHT
HTSS
Features
Easy to install
MED approved and USCG versions
ATEx version
5 year life on most versions
Benets
All our lifebuoy lights have back plates as standard
so are simple to install
Whether you need to meet USCG or MED we offer
both types in standard and ATEx versions
Most of our range have a 5 year life so it is t and
forget- no need to annually change batteries and
they provide a cost effective solution
Ordering information
Product number Description Use
637991 30" 2.5kg lifebuoy General
638007 30" 4kg lifebuoy For tting to an MOB smoke and light
779
Accessories
Product number Product name
777805 LIFEBUOY LIGHT L160 MED
777803 LIFEBUOY LIGHT L162 USCG
768408 LIFEBUOY LIGHT L161 ATEX/IECEx
777802 LIFEBUOY LIGHT L163 ATEX/IECEX/USCG
777801 LIFEBUOY LIGHT L16 X ADPTER PLATE
576702 LIFEBUOY LIGHT L90 WITH BATTERY
735985 Y BRACKET FOR LIFEBUOY
606210 FLOATING LIFELINE 50MTR
606209 FLOATING LIFELINE 45MTR
606208 FLOATING LIFELINE 30MTR
606206 RETROREFLECTIVE SOLAS TAPE (MED)
552240 IMO SIGN F/LIFEBUOY
552273 IMO SIGN F/LIFEBUOY W/
552257 IMO SIGN F/LIFEBUOY W/
552265 IMO SIGN F/LIFEBUOY W/
Pyrotechnics
781595 LIGHT-SMOKE SIGNAL (MAN OVER BOARD)
780
SAFETY Life Saving Appliances
Lifeboat Air Cylinders
LIF
IFEEBOAT C
CYYLIND
INDEERS
Features
50 litre / 200 bar
Standard tting for many type of lifeboats
Bauer compressors
Benets
Our cylinders will t most of your standard type
installations
As well as your BA set cylinders you can also rell
your lifeboat cylinders with our range of Bauer
compressors
Working pressure according to BS5045 / DOT3AA Note: To have a complete lling hose from a Bauer
compressor to the cylinder with 5/8'' female thread you
need the lling hose, adapter, connection stub and air nut.
Ordering information
Product number Description
653386 Air cylinder 50 litre - 200 bar with hand wheel operated valve,lled
619221 Regulator air 0-10 bar adjustale, capacity 40M3/H
233494 Connection stub OX/N2/Air
305565 Nut air 5/8' male
Accessories:
Filling hose 10 metre - female connection on both ends
Filling hose 25 metre - female connection on both ends
Filling hose 40 metre - female connection on both ends
Ask your local WSS Sales ofce for more information
781
SAFETY Life Saving Appliances
Liferafts
LIF
IFEERAFT R
REENT
NTA
AL
Features
Global life raft supply, rental or service solutions
Full range of sizes and types available
New 2012 MSC81(70) life rafts for supply or rental
Global service and local support
Benets
We are able to tailor solutions to meet your needs
Our range of life rafts is extensive with stocks in over
40 locations globally
Our vast turnover allows you to benet from the
latest approved life rafts being supplied
Regardless of the solution chosen you will always
benet from an appointed local contact person and
global service support
Markets:
782
Ordering information
Product number Description
Throwoverboard
759092 6 Person Rental liferaft with A Type emergency pack
759118 10Person Rental liferaft with A Type emergency pack
759126 12 Person Rental liferaft with A Type emergency pack
759134 16 Person Rental liferaft with A Type emergency pack
759142 20 Person Rental liferaft with A Type emergency pack
759159 25 Person Rental liferaft with A Type emergency pack
Davit Launchable
759167 12 Person Davit launch Rental liferaft with A Type emergency pack
759175 16 Person Davit launch Rental liferaft with A Type emergency pack
759183 20 Person Davit launch Rental liferaft with A Type emergency pack
759191 25 Person Davit launch Rental liferaft with A Type emergency pack
Accessories
Product number Single and double ramp cradles available on request
750751 Hydrostatic release unit 2 year life
777869 Hydrostatic release unit 4 year life
552315 IMO Liferaft Sign
552844 IMO Sign Lower liferaft
552356 IMO Sign Davit launch liferaft
Approvals
MED approved
783
SAFETY Life Saving Appliances
Liferafts
THR
HROOWOVERBOARD L
LIF
IFE
ERAFTS
Features
Full range of sizes and types available
New 2012 MSC81(70) life rafts
Global service and local support
Benets
We are able to tailor solutions to meet your needs
Our range of life rafts is extensive with stocks in over 40 locations globally
Our vast turnover allows you to benet from the latest approved life rafts being supplied
You will benet from an appointed local contact person and global service support
784
Ordering information
Product number Description
758024 6 Person Throwoverboard Solas A Type emergency pack
758026 10 Person Throwoverboard Solas A Type emergency pack
758027 12 Person Throwoverboard Solas A Type emergency pack
758028 16 Person Throwoverboard Solas A Type emergency pack
758029 20 Person Throwoverboard Solas A Type emergency pack
758030 25 Person Throwoverboard Solas A Type emergency pack
Ordering information
Range
Throwoverboard from 6 to 50 persons
Davit Launch from 12 to 37 persons
Standard or Self Righting versions available
Up to 40 metre freeboard heights
MED Ships Wheel approved
For other approvals please contact your local WSS sales ofce
Accessories
Product number Single and double ramp cradles available on request
750751 Hydrostatic Release Unit 2 year life
777869 Hydrostatic Release Unit 4 year life
552315 IMO Liferaft sign 15 x 15cm
Approvals
MED approved
785
SAFETY Life Saving Appliances
Liferafts
DAVIT L
LAAUNC
NCHHL
LIF
IFE
ERAFTS
Features
Up to 40 metre stowage height as standard
Full range of sizes and types available
New 2012 MSC81(70) life rafts
Global service and local support
Benets
We are able to tailor solutions to meet your needs
Our range of life rafts is extensive with stocks in over 40 locations globally
Our vast turnover allows you to benet from the latest approved life rafts being supplied
You will benet from an appointed local contact person and global service support
Markets:
Ordering information
Product number Description
758024 6 Person Throwoverboard Solas A Type emergency pack
758026 10 Person Throwoverboard Solas A Type emergency pack
758027 12 Person Throwoverboard Solas A Type emergency pack
758028 16 Person Throwoverboard Solas A Type emergency pack
758029 20 Person Throwoverboard Solas A Type emergency pack
758030 25 Person Throwoverboard Solas A Type emergency pack
786
Ordering information
Range
Throwoverboard from 6 to 50 persons
Davit Launch from 12 to 37 persons
Standard or Self Righting versions available
Up to 40 metre freeboard heights
MED Ships Wheel approved
For other approvals please contact your local WSS sales ofce
Accessories
Product number Single and double ramp cradles available on request
750751 Hydrostatic Release Unit 2 year life
777869 Hydrostatic Release Unit 4 year life
552356 IMO sign Davit Launch Liferaft
552844 IMO sign Lower liferaft
Approvals
MED approved
787
SAFETY Life Saving Appliances
Pyrotechnics
PYROTECHNIC
HNICSS
Features
Approved products
Local sales ofce support
Compliance to local transport regulations
Benets
WSS global network supply will ensure you only
recieve quality approved pyrotechnics
We can dispose of your old pyrotechnics (can vary in
some ports according to local regulations)
We can supply approved alternatives to ensure you comply due to availability or local transport regulations
Ordering information
Product number Description Use in liferafts In lifeboats In bridge set
750754 Red Handare 6 per liferaft 6 per lifeboat
750758 Red Parachute Rocket 4 per liferaft 4 per lifeboat 12 per vessel
750760 Orange buoyant smoke signal 2 per liferaft 2 per lifeboat
781595 Man overboard Light and smoke signal 2 per vessel
1 on each bridge wing
790390 Linethrower 1 set of 4 units
638007 4.3kg Lifebuoy for use with Man overboard light and smoke
788
RESCUE E
EQQUIP
IPME
MENT
NT
Features
Quality materials and production
Benets
We only source the best quality rescue tools to give you the best for the job
Where required all tools and equipment are approved by the appropriate authorities
Ordering information
Product number Description
716951 Helideck equipment basic set
Tools and Safety
777603 Full body harness
777612 Fall Arrest Elasticated lanyard for Fall arrest harness
777611 Basic Kit Full Body Harness & Lanyard
176826 Fire ghters 30 mt lifeline with hook
546648 Hacksaw
546655 Spare hacksaw blades
546663 Telescopic pole 2mt with hook
546671 Knife for quick release with sheath
546747 Pliers side cutting
606206 Retro reective tape
527515 Crowbar
Fire Axes
525535 Fire Axe 17" shaft
176842 Fire Axe 24" shaft
755314 Fire Axe 32" shaft
534958 Fire Axe with insulated handle 2kv
525519 Cover for re axe
534966 Bracket for insulated re axe
Torches and Lamps
782406 Safety Torch ATEX right angled
658310 Safety torch ATEX
736611 Marshalling baton
658328 Wolite Safety Lamp H-251a Battery
638726 Wolite Safety Lamp H-251a
588301 Wolite Safety Lamp H-251a Charger
638973 Wolite Safety Lamp H-251a Bulb
789
SAFETY Life Saving Appliances
Stretchers
NE
NEIL
IL R
ROOBERTSON S
STTRETCHE
HERR
825 184390
Features
Flexible semi-rigid canvas design
Light-weight
Vertical recovery
High quality materials for longer product lifespan
Benets
You can neatly fold it to store away
No specialist training is required to use
The strapping holds the casualty rmly even when you need to recover vertically
A regular equipment check is all you need to perform to ensure it is ready for use at all time
Technical data
Length 150cm
Width 100 cm
Weight 10 kg
Lifting capacity 120 kg
790
SAFETY Life Saving Appliances
Stretchers
PARAME
MEDDIC S
STTRETCHE
HERRA
AND
ND R
REESCUE U
UNIT
NIT
825 537357
Features
Includes straps to secure arms and legs
Sectioned headguard with adjustable bands
Benets
Side rods allow you to horizontally lift
You can X-ray patients without removing them from
the stretcher
It is ideal for lifting patients clear of hazardous area
Light-weight and compact ensures it is not a struggle
when moving to an incident
791
SAFETY IMO Signs
IMO Embarkation station/Lifeboat signs
IMO L
LIF
IFE
EBOAT S
SIG
IGNS
NS
Features
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
Benets
Our approvals are global and satisfy the requirements of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a
longer lasting product
Ordering information
Product number Description Fitting Material Size
552331 Lifeboat sign Wall mounted Self adhesive vinyl 15 x 15cm
751031 Lifeboat station guidance sign Down Wall mounted Self adhesive vinyl 15 x 30cm
751025 Lifeboat station guidance sign Down right Wall mounted Self adhesive vinyl 15 x 30cm
751028 Lifeboat station guidance sign Down left Wall mounted Self adhesive vinyl 15 x 30cm
751034 Lifeboat station guidance sign Up Wall mounted Self adhesive vinyl 15 x 30cm
552406 Lifeboat fasten seat belt sign Wall mounted Self adhesive vinyl 15 x 30cm
552414 Lifeboat secure hatches sign Wall mounted Self adhesive vinyl 15 x 30cm
552448 Lower Lifeboat instruction sign Wall mounted Self adhesive vinyl 15 x 30cm
552422 Lifeboat release falls sign Wall mounted Self adhesive vinyl 15 x 30cm
552471 Lifeboat start air supply sign Wall mounted Self adhesive vinyl 15 x 30cm
552463 Lifeboat release gripes sign Wall mounted Self adhesive vinyl 15 x 30cm
792
SAFETY IMO Signs
IMO Escape Way guidance signs
ESCAPE W
WA
AY A
AND
ND G
GUUID
IDA
ANC
NCE
ESSIG
IGNS
NS
Features
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
Benets
Our approvals are global and satisfy the requirements of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a
longer lasting product
Ordering information
Product number Description Fitting Material Size
751049 Escape way guidance sign Right Wall mounted Self adhesive vinyl 15 x 30cm
751043 Escape way guidance sign Left Wall mounted Self adhesive vinyl 15 x 30cm
751073 Escape way guidance sign down Right Wall mounted Self adhesive vinyl 15 x 30cm
751076 Escape way guidance sign Down Left Wall mounted Self adhesive vinyl 15 x 30cm
751055 Escape way guidance sign Up Wall mounted Self adhesive vinyl 15 x 30cm
751058 Escape way guidance sign Down Wall mounted Self adhesive vinyl 15 x 30cm
751061 Escape way guidance sign Up Right Wall mounted Self adhesive vinyl 15 x 30cm
751070 Escape way guidance sign Up Left Wall mounted Self adhesive vinyl 15 x 30cm
751067 Escape way guidance sign double sided Down Right Ceiling mounted Clear pvc ceiling mounting 15 x 30cm
751064 Escape way guidance sign double sided Up left Ceiling mounted Clear pvc ceiling mounting 15 x 30cm
751037 Escape way guidance sign double sided Left Ceiling mounted Clear pvc ceiling mounting 15 x 30cm
751052 Escape way guidance sign panoramic Wall or corner mounted Clear pvc 20 x 20cm
751046 Escape way guidance sign double sided Right Wall mounted double sided Clear pvc 15 x 30cm
751040 Escape way guidance sign double sided Left Wall mounted double sided Clear pvc 15 x 30cm
793
SAFETY IMO Signs
IMO Fire ghting Equipment & System signs
FIR
IREEE
EQQUIP
IPME
MENT
NT S
SIG
IGNS
NS
Features
Variety of installation options
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
Benets
Our approvals are global and satisfy the requirements of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions plus you get incredible ageing and weathering performance resulting in increased levels of safety
and a longer lasting product
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
You can choose from a selection of tting options for maximising the visual effect
Ordering information
Product number Description Fitting Material Size
751100 Water mist exinguishing system hazardous area sign Wall mounted Self adhesive vinyl 20 x 20cm
782144 Novec 1230 extinguishing system hazardous area warning sign Wall mounted Self adhesive vinyl 20 x 20cm
751082 Novec 1230 manual control point sign sign Wall mounted Self adhesive vinyl 15 x 15cm
751097 Fire Telephone Point sign Wall or corner mounted Rigid PVC panoramic 20 x 20cm
751094 Fire telephone Point sign Wall mounted Self adhesive vinyl 15 x 15cm
751091 Fire alarm point sign Wall or corner mounted Rigid pvc panoramic 20 x 20cm
751088 Fire Hose point sign Wall or corner mounted Rigid pvc panoramic 20 x 20cm
751085 Water extinguisher point and instructions sign Wall mounted Self adhesive vinyl 8 x 20cm
751079 Deluge release manual control point sign Wall mounted Self adhesive vinyl 15 x 15cm
794
SAFETY IMO Signs
IMO First Aid & Safety Equipment signs
FIR
IRSST A
AID
ID A
AND
ND ME
MEDDIC
ICAAL E
EQQUIP
IPME
MENT
NT S
SIG
IGNS
NS
Features
Wall mounted or panoramic showing medical emergency assistance
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
High quality photoluminescance
Benets
Our approvals are global and satisfy the requirements of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a
longer lasting product
IMO SOLAS Signs are designed to satisfy Chapter III, emergency lighting conditions and used in accordance with
Regulation 9.2.2 and Regulation 9.2.3 of the SOLAS the recommendations of the IMO.
Convention. Signs are required to be easily seen under
Ordering information
Product number Description Fitting Material Size
751118 Breathing apparataus for medical use sign Wall mounted Self adhesive vinyl 15 x 15cm
751109 Hand washing sign Wall mounted Self adhesive vinyl 15 x 15cm
751115 Medical emergency call point sign Wall mounted Self adhesive vinyl 15 x 15cm
751103 General Alarm call point sign Wall mounted Self adhesive vinyl 15 x 15cm
751124 Doctor/Paramedic sign Wall mounted Self adhesive vinyl 15 x 15cm
751106 Emergency eye wash station sign Wall mounted Self adhesive vinyl 15 x 15cm
751112 Medical Emergency telephone sign Wall mounted Self adhesive vinyl 15 x 15cm
751121 Auto external debrillator sign Wall mounted Self adhesive vinyl 15 x 15cm
795
SAFETY IMO Signs
IMO Hazard signs
IMO HA
HAZZARD S
SIG
IGNS
NS
Features
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
Benets
Our approvals are global and satisfy the requirements of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a
longer lasting product
Ordering information
Product number Description Fitting Material Size
751148 Flammable risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751187 Oxidisation risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751157 Compressed gas risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751166 Slippery surface risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751172 Risk of falling sign Wall mounted Self adhesive viniyl 15 x 15cm
751169 Steep steps risk warning sign Wall mounted Self adhesive viniyl 15 x 15cm
751163 Trip hazard risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751151 Mind your head risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751178 Overhead loads risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751160 Over head working risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751181 Low temp risk sign Wall mounted Self adhesive viniyl 15 x 15cm
652412 Radioactive risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751133 Laser risk sign Wall mounted Self adhesive viniyl 15 x 15cm
652404 Corrosive risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751142 Toxic risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751136 Non-ionising radiation risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751145 Biological risk sign Wall mounted Self adhesive viniyl 15 x 15cm
796
Product number Description Fitting Material Size
751154 Noise risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751139 Fork lifts in use risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751127 Electrical risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751175 Heavy goods lorries risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751130 Machinery risk sign Wall mounted Self adhesive viniyl 15 x 15cm
751184 Magnetic eld risk sign Wall mounted Self adhesive viniyl 15 x 15cm
652354 Engine room machinery space Wall mounted Self adhesive vinyl 15 x 15cm
652420 Flammable substance Wall mounted Self adhesive vinyl 15 x 15cm
652438 Explosion risk Wall mounted Self adhesive vinyl 15 x 15cm
782139 Explosion risk Wall mounted Self adhesive vinyl 15 x 15cm
782410 Low oxygen level Wall mounted Self adhesive vinyl 15 x 15cm
526566 Gas Danger Wall mounted Self adhesive vinyl 15 x 30cm
797
SAFETY IMO Signs
IMO LSA Signs
IMO L
LIF
IFE
ESAVING A
APPPLIA
IANC
NCE
ESSIG
IGNS
NS
Features
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
Benets
Our approvals are global and satisfy the requirements
of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a
longer lasting product
Ordering information
Product number Description Fitting Material Size
552331 Lifeboat sign Wall mounted Self adhesive vinyl 15 x 15cm
552315 Liferaft sign Wall mounted Self adhesive vinyl 15 x 15cm
552356 Davit launch liferaft sign Wall mounted Self adhesive vinyl 15 x 15cm
552190 Life jacket sign Wall mounted Self adhesive vinyl 15 x 15cm
552208 Child's life jacket sign Wall mounted Self adhesive vinyl 15 x 15cm
552240 Lifebuoy sign Wall mounted Self adhesive vinyl 15 x 15cm
552273 Lifebuoy with light and smoke sign Wall mounted Self adhesive vinyl 15 x 15cm
552257 Lifebuoy with line sign Wall mounted Self adhesive vinyl 15 x 15cm
798
Product number Description Fitting Material Size
552265 Lifebuoy with light sign Wall mounted Self adhesive vinyl 15 x 15cm
552323 Rescue boat sign Wall mounted Self adhesive vinyl 15 x 15cm
552372 Embarkation ladder sign Wall mounted Self adhesive vinyl 15 x 15cm
552349 Evacuation slide sign Wall mounted Self adhesive vinyl 15 x 15cm
751190 Evacuation chute sign Wall mounted Self adhesive vinyl 15 x 15cm
751193 Scramble net sign Wall mounted Self adhesive vinyl 15 x 15cm
552216 Survival craft portable radio sign Wall mounted Self adhesive vinyl 15 x 15cm
552224 EPIRB sign Wall mounted Self adhesive vinyl 15 x 15cm
552232 Radar transponder (SART) sign Wall mounted Self adhesive vinyl 15 x 15cm
552299 Survival craft distress signal storage sign Wall mounted Self adhesive vinyl 15 x 15cm
552380 Line throwing appliance sign Wall mounted Self adhesive vinyl 15 x 15cm
552281 Immersion suit sign Wall mounted Self adhesive vinyl 15 x 15cm
552844 Lower liferaft instruction sign Wall mounted Self adhesive vinyl 15 x 15cm
552455 Lower rescue boat instruction sign Wall mounted Self adhesive vinyl 15 x 15cm
552307 Red Parachute rocket Wall mounted Self adhesive vinyl 15 x 15cm
799
SAFETY IMO Signs
IMO Muster/Assembly station signs
MU
MUSSTER A
AND
ND A
ASSSEMB
MBLLY S
STTATIO
IONNS
SIG
IGNS
NS
Features
Wall-mounted or panoramic showing Muster Point sometimes used with a letter or number depicting point reference
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
Benets
Our approvals are global and satisfy the requirements of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a
longer lasting product
IMO SOLAS Signs are designed to satisfy Chapter III, emergency lighting conditions and used in accordance with
Regulation 9.2.2 and Regulation 9.2.3 of the SOLAS the recommendations of the IMO.
Convention. Signs are required to be easily seen under
Ordering information
Product
number Description Fitting Material Size
552562 No 1 sign Wall mounted usually with assembly or muster station Self Adhesive vinyl 15 x
signs 7.5cm
552570 No 2 sign Wall mounted usually with assembly or muster station Self Adhesive vinyl 15 x
signs 7.5cm
552588 No 3 sign Wall mounted usually with assembly or muster station Self Adhesive vinyl 15 x
signs 7.5cm
552596 No 4 sign Wall mounted usually with assembly or muster station Self Adhesive vinyl 15 x
signs 7.5cm
552364 Assembly station sign Wall mounted Rigid pvc double 15 x 30cm
sided
800
Product
number Description Fitting Material Size
751232 Assembly station guidance sign Down Wall mounted Self adhesive vinyl 15 x 30cm
Right
751235 Assembly station guidance sign Down left Wall mounted Self adhesive vinyl 15 X 30cm
751229 Assembly station guidance sign Right Wall mounted Self adhesive vinyl 15 x 30cm
751247 Assembly station guidance sign Left Wall mounted Rigid pvc double 15 x 30cm
sided
751244 Assembly station guidance sign UP Wall mounted Self adhesive vinyl 15 x 30cm
751223 Assembly station guidance sign Down Wall mounted Self adhesive viny 15 x 30cm
751238 Assembly station guidance sign Up right Wall mounted Self adhesive viny 15 x 30cm
751220 Assembly station guidance sign Wall or corner mounted Self adhesive viny 15 x 30cm
Panoramic
751241 Assembly station guidance sign Up left Wall mounted Self adhesive vinyl 15 x 30cm
751226 Assembly station Right Wall mounted Self adhesive vinyl` 15 x 15cm
801
SAFETY IMO Signs
IMO Personal Protective Equipment signs
PERSONA
NALLP
PRROTECTIV
IVEEE
EQQUIP
IPME
MENT
NT S
SIG
IGNS
NS
Features
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
Benets
Our approvals are global and satisfy the requirements of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a
longer lasting product
Ordering information
Product number Description Fitting Material Size
751208 Wear Respirator sign Wall mounting Self adhesive vinyl 15 x 15cm
782146 Wear eye protection sign Wall mounting Self adhesive vinyl 15 x 15cm
751202 Wear hand protection sign Wall mounting Self adhesive vinyl 15 x 15cm
751196 Wear a face shield sign Wall mounting Self adhesive vinyl 15 x 15cm
652396 Use a welding mask sign Wall mounting Self adhesive vinyl 15 x 15cm
751214 Wear high visibility clothing sign Wall mounting Self adhesive vinyl 15 x 15cm
751199 Wear anti static footwear sign Wall mounting Self adhesive vinyl 15 x 15cm
751211 Wear protective clothing sign Wall mounting Self adhesive vinyl 15 x 15cm
751217 Wear a life jacket sign Wall mounting Self adhesive vinyl 15 x 15cm
652370 Wear foot protection sign Wall mounting Self adhesive vinyl 15 x 15cm
751205 Wear a safety harness sign Wall mounting Self adhesive vinyl 15 x 15cm
652388 Wear goggles Wall mounting Self adhesive vinyl 15 x 15cm
802
SAFETY IMO Signs
IMO Prohibition signs
IMO P
PRROHIB
HIBIT
ITIO
IONNS
SIG
IGNS
NS
Features
ISPS code
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
Benets
Our approvals are global and satisfy the requirements of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a
longer lasting product
Ordering information
Product number Description Fitting Material Size
751250 No Radio transmitters sign Wall mounted Self adhesive vinyl 15 x 15cm
751262 No drinking or eating sign Wall mounted Self adhesive vinyl 15 x 15cm
751259 Not drinking water sign Wall mounted Self adhesive vinyl 15 x 15cm
751256 No escape route sign Wall mounted Self adhesive vinyl 15 x 15cm
751253 No thoroughfare sign Wall mounted Self adhesive vinyl 15 x 15cm
652230 No smoking beyond this point sign Wall mounted Self adhesive vinyl 15 x 15cm
652347 Dont throw garbage overboard sign Wall mounted Self adhesive vinyl 15 x 15cm
526558 No Admittance Wall mounted Self adhesive vinyl 20 x 30cm
803
SAFETY IMO Signs
IMO Security Instruction signs
IMO S
SEECURIT
ITYY INS
INSTTRUCTIO
IONNS
SIG
IGNS
NS
Features
ISPS code
Approved by SOLAS
High quality photoluminescance
Long lasting for all marine environments
Benets
Our approvals are global and satisfy the requirements of the majority of maritime authorities
The high quality photoluminescant materials offer superior performance and can easily be seen under emergency
lighting conditions
This range exceeds the luminance criteria laid down and stays brighter up to 4 times longer than other
photoluminescant materials
Our range of signs offer incredible ageing and weathering performance resulting in increased levels of safety and a
longer lasting product
Ordering information
Product number Description Fitting Material Size
751268 Multi instruction no unauthorised persons,valid identication, baggage search sign Wall mounted Self adhesive vinyl 30 x 30cm
751265 Crew only no unauthorised access sign Wall mounted Self adhesive vinyl 15 x 30cm
751286 Multi inctruction, weapons,photography or persons sign Wall mounted Self adhesive vinyl 30 x 30cm
751271 Mobile phones must be switched off Wall mounted Self adhesive vinyl 10 x 30cm
751283 Restricted area no unauthorised entry Wall mounted Self adhesive vinyl 10 x 30cm
751280 Restricted area authorised personnel only Wall mounted Self adhesive vinyl 10 x 30cm
751289 Restricted are sign Wall mounted Self adhesive vinyl 10 x 30cm
751274 No Photography sign Wall mounted Self adhesive vinyl 10 x 30cm
751277 No weapons,incendairys or explosives sign Wall mounted Self adhesive vinyl 10 x 30cm
804
SAFETY IMO Signs
IMO SOLAS tape
RETROREFLECTIV
IVEET
TA
APE
820 606206
Features
MED/USCG approved
Durable
Anti de-lamination
High reectivity wet or dry
Benets
The self-adhesive properties allow it to be adhered to most LSA products without the need for specialist surface
preparation
The 50 metre rolls provide ample coverage for any repairs or renewals required
It is extremely exible making a positive contact even on curved surfaces so ideal for rescue boats, lifeboats and
lifebuoys.
Even when wet you will get the full reective benet
Technical data
Size 55 MM X 45 MTR
805
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!&%*$",60%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!&%*$",60%'9*%
93/52$&0"(&
SAFETY
MEDICAL
DEFIB
IBRRIL
ILLLATOR HE
HEAARTSTART F
FRRX INC
INCLLUDING
PADS A
AND
ND S SO
OFTCASE
825 755942
Features
Philips SMART Biphasic technology delivers a highly effective debrillation shock while also gentle to the heart
Philips SMART Analysis Device only shocks when required, even if the shock button is pressed
SMART Pads II enable the FRx to keep pace with the responder by adjusting to their actions
Self testing
Benets
Protects crew and passengers
Easy to set-up and use
Clear instructions, step by step guidance through the screen
Technical data
808
SAFETY Medical Oxygen
Medical Oxygen Systems
ME
MEDDO
OX
XS SY
YSTEM IMO
IMO,, O
OUUTSID
IDEEE
EXXCL MO
MOX
X-40
CYLIND
INDEER
826 610253
Features
PiSS Valve (Pin Index Safety System) connection as
standard
Complete system supplied in one box
Complete installation instructions
Benets
Compatible with Unitor Mox-40 cylinders exchange
system
Easy installation
Two separate ow meters allowing for independently
different ow rates to each patient
Ordering information
Supplied with:
Approvals
IMO/MFAG approved
809
SAFETY Medical Oxygen
Medical Oxygen Systems
ME
MEDDO
OX
XS SY
YSTEM. IMO B
BEEDSID
IDEEE
EXXCL MO
MOX
X-40
CYLIND
INDEER
826 610261
Features
PiSS Valve (Pin Index safety system) connection as
standard
Complete system supplied in 1 box
Complete installation instructions
Benets
Easy installation
Two separate ow meters allowing for independently different ow rates to each patient
Compatible with Unitor Mox 40 cylinders cylinder exchange system
Ordering information
Supplied with:
Approvals
IMO/MFAG approved
810
SAFETY Medical Oxygen
Medical Oxygen Systems
ME
MEDDOOX
XSSY
YSTEM IMO
IMO,, NO
NORRWEGIA
IANNT
TYYPE E
EXXCL
MO
MOXX-40 C
CYYLIND
INDEER
826 653295
Features
PiSS Valve (Pin Index safety system) connection as
standard
Complete system supplied in 1 box
Complete installation instructions
Benets
Compatible with Unitor Mox 40 cylinders cylinder exchange system
Easy installation
Two separate ow meters allowing for independently different ows rates to each patient
Ordering information
Supplied with:
Approvals
IMO/MFAG Approved
811
SAFETY Medical Oxygen
Medical Oxygen Resuscitators
OXYGEN R
REESUSCIT
ITA
ATOR W
WIT
ITHO
HOUUT C
CYYLIND
INDEER
825 652131
Features
Less MOX 2lt/200 bar cylinder
Numerous sizes of guedel airways
Manual ventilator with different sizes of oxygen masks
Complete with bag
Length 530 mm You can simply enter the Unitor cylinder exchange
Height 220 mm program and not worry about rells
Weight 5.1 kg It is simple to use and requires no specialist training
You do not have to make judgements on the lung
capacity of the patient to select a tidal volume, only
It is designed to meet BS6850:1987 for ventilatory the basic size or type of patient being cared for
resuscitators. Even if you select the wrong setting the fail safe will
vent excess gas whilst giving the operator an audible
warning that the equipment is not being used
correctly
Ordering information
Supplied with:
Product No Description
652180 Bag for Resuscitator
763967 Adj. Reducing Valve and Yoke
652198 Ventilator with Mask, Reservoir, Tubing
652164 Head Harness
608455 Guedel Airways Set 2 x Sizes 2,3,4
652172 Extension Tube with Adaptor
691808 Spare Seal for Piss Valve
647735 Knob Manipulator
812
SAFETY Medical Oxygen
Medical Oxygen Resuscitators
ME
MEDDIC
ICAAL S
SUUCTIO
IONNU
UNIT
NIT
825 589937
The V-VAC Manual Suction Unit is ideal for rst responder emergency kits and as back-up suction.
Features
One-handed operation, one-piece disposable cartridge and unique no-clog suction tip
Adjustment for high and low pressure suction
Features a unique no-clog suction tip (intake valve)
Efcient: maximum suction exceeds 380 mm Hg
Peak air ow over 70 litres per minute
Benets
The versatile catheta connection gives you the scope to use on it for many different persons
The disposable one-piece cartridge provides a new, clean pump, valve and suction tube each time you use it
You simply immerse the reusable handle for cleaning
All parts are latex-free to prevent any reactions
Approvals
CE marked - this product is in compliance with the essential
requirements of Council Directive 93/42/EEC as amended
by Council Directive 2007/47/EC.
813
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!.6*2/.-&.4",60%'9*%
93/52$&0"(&
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!.6*2/.-&.4",60%'9*%
93/52$&0"(&
SAFETY
ENVIRONMENTAL
OIL S
SPPIL
ILLLK
KIT
ITS
S
Features
Complete kit
Personal protection
Waterproof box
Full range of spares available
Contents Vary depending on size of kit All kits are designed to meet the IMO and OPA90
Yellow storage box recommendations
Roll of plastic bags As well as providing the tools for tackling the spill the
kit also includes personal protection equipment
Sorbent pads U94200 The box is waterproof so you can store it on deck
Spill kit gloves ready for an emergency
Once only use one piece suits
Unitor oil spill kits come in 3 sizes:
Aqaubreak PX a waterbased cleaning chemical
Jet spray tool 12 barrel to handle 1900 litres of deck spill for tankers
1 oil spill kit bag **ContainingSorbent booms 400 ft or greater carrying bulk oil
7 barrel to handle 1000 litres of deck spill for tankers
1 oil spill kit bag **ContainingSorbent pads U9450 -Sorbent rolls
under 400 ft
U94150S
1 barrel for inland oil barges
1 Barrel kit does not include an oil spill kit bag
Ordering information
Product number Description
592717 12 barrel (1900 litres) complete kit
597237 7 barrel (1100 litres) complete kit
597245 1 barrel complete kit
604314 7 barrel sorbent kit
816
SAFETY Oil spill kits
Oil spill products
OIL S
SPPIL
ILLLC
CAARE A
AND
ND MA
MAINT
INTE
ENA
NANC
NCEET
TO
OOLS
Features
Non sparking
tough plastics
Benets
The non sparking features gives you a higher level of
safety
These tools are basic but will give you a tough and
durable life
You can reuse after cleaning
Ordering information
Product number Description
607440 Plastic bucket 10 litre capacity
607441 Squeegee with wooden handle 610mm width
607442 Plastic scoop 138 x 187 x 310mm
607443 Plastic spatula - 4" blade 100 x 250mm
607439 Safety shovel large blade
817
SAFETY Oil spill kits
Oil spill products
OIL S
SPPIL
ILLLK
KIT
IT S
SPPARE S
STTORAGE B
BOOX
940 592725
Features
Bright yellow colour for easy identication
Benets
Waterproof
Multi-use
OIL S
SPPIL
ILLLK
KIT
IT S
SPPARE 1000 L W
WA
ASTE B
BAAG
940 592774
For use with Unitor oil spill kits or can be utilised as a stand alone product. The waste bag allows you
to collect oil waste, store it and dispose when in port. The sealed top keeps your contents safe until
you are ready to dispose of them.
Features
1000 litre capacity
Fold away
818
SAFETY Oil spill kits
Sorbents & Booms
SPIL
ILLLK
KIT
IT S
SOORBENT P
PA
ADS
Features
Oil only absorption pads
High absorbency rate
Keeps shape even when fully saturated
Benets
They offer a fast and efcient way of ensuring a quick
containment of your spill
By keeping their shape it is easier for you to handle
them
Ordering information
Product number Description Size Absorption rate
592733 50 pack of oil only pads U9450. 97 x 86cm 310 litres
Large pad will tackle your oil spills that have spread quickly.
603167 100 pack of oil only pads U94100 48 x 43cm 155 litres
592758 200 pack oil only absorption pads U94200 48 x 43cm 155 litres
603175 100 pack oil only absorption pads U94230 30 x 30cm 65 litres
819
SAFETY Oil spill kits
Sorbents & Booms
SORBENT R
ROOLLS
Features
For multiple applications
High absorbency rate
Keeps shape even when fully saturated
Benets
Simply tear or cut the required length you require
Regardless of your spill whether oily, ammable or
chemical we can offer you a solution for your
cleaning requirements
They offer a fast and efcient way of ensuring a quick
containment of your spill
By keeping their shape it is easier for you to handle
them and not have an oily mess in your hands
Ordering information
Part number Description Size each Absorption rate
592741 2 rolls oil only U94150S 44 metres x 48cm 310 litres
603183 1 roll oil only U94150 44 metres x 97cm 310 litres
603191 1 roll oil only UP4300 88 metres x 97cm 310l itres
Static resistant
603209 2 rolls oil only U94300S 88 metres x 48cm 310 litres
603324 1=2 rolls static resistant U943601S 44 metres x 48cm 310 litres
820
SAFETY Oil spill kits
Sorbents & Booms
SORBENT P
PA
ARTIC
ICUULATE U
U94
94
941 603274
Features
High absorption rates
Flexible use
Easy to dispose
Easy to handle
Description Oil spill particulate U94 It gives you absorption rates up to 25 times its own
Weight 11.3 kg weight and does not absorb water
Quantity 1 bag - Easy to handle and recover- its 100% chopped
polypropylene materials absorbs oil based liquids so
Absorb. Capacity 202 litres you can simply shovel up the spill or use a net in the
water
You can incinerate it making it easier to dispose of
821
SORBENT S
SW
WEEP U
U94
941800
1800
941 603241
Features
Easily controllable
Easy disposal
Length 30000 mm The sweep has built in tension straps so you can
Width 460 mm control the recovery of the sweep
Weight 6.4 kg It can be incinerated making it easier to dispose of
Quantity 1-
Absorb. Capacity 114
822
SAFETY Oil spill kits
Sorbents & Booms
SORBENT P
PIL
ILL
LOWS
Features
High absorption rates
Flexible use
Easy to dispose
Easy to handle
Benets
They absorb up to 25 times their own weight
The absorption materials are held in a sock making them ideal to stopping spills going under doorways or
cupboards. You can also them for cleaning oil spills
You can incinerate them so are easy to dispose
Their small length makes allows you to lay them along an area and makes them easier to handle than oil booms
Ordering information
Part number Description Size each Absorption rate
603258 Oil spill pillow U9410P 10 piece pack 46cm x 20cm dia 155 litres
603266 Oil spill pillow U9440P 40 piece pack 46cm x 10cm dia 310 litres
604322 Oil spill pillow U9440P 12 piece pack 46cm x 10cm dia 93 litres
823
SAFETY Oil spill kits
Sorbents & Booms
SORBENT B
BOOOMS
Features
Highly absorbent
Absorption material contained
Can be linked
Easy disposal
Benets
Filled with 100% polypropylene contained in a net sock ensures you do not lose any spill when recovering
The metal hooks at either end allow you to link them together for your required length
You can incinerate them for easier disposal
Ordering information
Part number Description Size each Absorption rate
592766 4 pieces oil boom U94410S 3 metres x 13cm 114 litres
603217 4 pieces(double) oil booms U94410 3 metres x 10cm 228 litres
603233 4 pieces oil boom with net U94810SN 3 metres x 20cm 392 litres
824
826
WILHELMSEN TECHNICAL SOLUTIONS
SAFETY SYSTEMS
827
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
Applicable to
t Engine rooms
t Pump rooms
t Compressor rooms
t Swithcboard rooms
t Engine control rooms
Benets
t Unitor 1230 system uses Novec 1230 uid* (*developed t Harmless to people and the environment
and manufactured by 3M.) It is stored as liquid and t Small pipe dimensions saves installation space, weight
discharged as gas, suppressing re by a combination of and lowers total installation cost
heat absorption and chemical interference with the ame t Flexible installation options, smaller footprint than for CO2
t Large nozzle coverage with a unique discharge pattern systems
especially developed for maritime and offshore industries t Replacement uid is available worldwide
t No measureable impact on climate change:
- Ozone Depletion Potential (ODP) is zero
- Global Warming potential (GWP) is 1
- Atmospheric life time of only ve days
t Low design concentration of 5.5% to 6% in combination
with a safety margin of up to 100%.
t The US EPA Signicant New Alternatives Program (SNAP)
classies Novec 1230 uid as acceptable for use as a total
ooding agent in occupied spaces.
Common congurations
Modular Central
Technical data
Cylinders Flexible installation
Volume 14 to 345 litres t Modular system cylinders are stored inside the
Storage pressure 34.5 bar at 21 C
protected compartments
t Central system - central bank of cylinders outside of
Material steel
the protected spaces, extinguishing uid distributed
Standards EN or US DOT through piping network
Certicates all major classication societies t Combination of the above
Applicable to
t Machinery spaces of category A
t Cargo spaces for dangerous goods
t Sealed ro-ro cargo spaces
t Cargo pump rooms on tankers (oil and chemical)
t Cargo compressors rooms on gas tankers (LNG & LPG)
t Spaces containing ammable liquids (paint stores)
t Galley range exhaust duct
t Main engines scavenge boxes
t Pressure operated cylinder top valves ensure quick t CO2 leaves no residue to clean up
discharge of CO2, and almost instantaneous extinguishing t High quality system, easy to install and operate
of the re reducing potential cost of damages t Requires minimal maintenance, keeping operating costs
t A manual release system is available for individual or low
sequential release of the CO2 cylinders t Aftersales services and relling of the CO2 cylinders is
t The system is equipped with alarms and a safe release available worldwide
delay function to ensure the safety of your crew
Common conguration
Technical data
Cylinders Material of construction
Volume (ltr) 67,5 / 80 Body steel
Weight of CO2 gas (kg) 45 / 54 Stem and ball stainless steel
Storage pressure@20C (bar) 58,5 Certicates all major class certicates or according to specication
Test pressure (bar) 250
Certicates All major classes Manifold
Standard ISO, EN or US DOT Size DN40 DN100
Nominal pressure PN100 and PN160
Release cabinet Certicates all major
j class certicates or accordingg to specication
p
Cylinders 2,68 ltr with 1,72 kg CO2
Degree of protection IP55
Distribution valves
Sizes DN20 to DN150
Nominal pressure PN100 and PN160
System description
The Unitor CO2 system consists of a high pressure cylinder For safety reasons the release cabinet is located outside the
bank, a release cabinet, a piping system leading to a grid of protected space, and must be operated manually. When the
nozzles in the protected area. Each high pressure cylinder cabinet is opened, microswitches activate CO2 alarms to allow
is connected via exible high pressure hoses to a common for evacuation. After a dened time delay, the distribution
manifold. The cylinder bank can have either manual or valves open and gas is spread rapidly into the protected
pressure operated cylinder top valves, depending on the areas, quickly extinguishing the re.
vessels application.
Installation
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
About CO2
CO2 is a colourless, non-corrosive gas that causes no
damage or chemical reaction to metals, electrical equipment,
applied surfaces or oil. The gas is usually compressed to
liquid state in high pressure cylinders for storage. Its shelife
is indenite.
The Unitor Dry chemical powder system is a highly effective re extinguishing system
especially developed for cargo decks, cargo manifold areas and tank areas on gas carriers.
It can be installed as a central, modular or hybrid system to ensure complete reach even
in small or partially covered areas. All three versions comply with the IMO Code for the
construction and equipment of ships carrying liquied gases in bulk.
Applicable to
t Gas carriers cargo decks, cargo manifold areas and tank areas
t LNG fuelled vessels lling pipes and manifolds
t Other merchant marine and offshore structures
Features Benets
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
t Flexible and high quality re extinguishing system t Non-toxic powder, harmless to both crew and environment
t Easy to install and operate t Almost immediate re extinction as the powder breaks the
t Extensively and independently tested system, regulatory chain of combustion
compliant t Standardised system components minimise maintenance
t Powder monitors and non-kinking hoses with pistols and operational costs
ensure complete reach of all areas on deck, including t Skid unit solution available, reducing installation time and
small and/or partially covered areas cost
t The modular system options are self-contained. Each t Custom made solutions in accordance with rules and
hose/ monitor unit has its own powder storage vessel, no regulations
need for powder pipework
t Modular unit sizes range from 160kg to 1000kg capacity
t Modular units can also be used for extra protection of car
decks, heli decks and cargo decks on chemical tankers
t Flexible piping options
Common conguration
Technical data
Tanks Monitor
Material steel Material stainless steel
Capacity (kg) 160 2500 Capacity (kg/s) above 10
Pressure class PN16 Flange connection DN50 and DN65
Certication as required by class
Pistol
Cylinders Material stainless steel
Material steel Capacity (kg/s) 3,5
Capacity (ltrs) 50
Pressure (bar) 200 Cabinets
Certication as required by class Material GRP (glass bre)
Type of operation pneumatic
Powder
Type BC Jet
Central system for powder pipework, lowering installation cost. Units are
Consisting of a powder central including powder tanks, offered in sizes from 160 - 1000kg capacity. The modular
nitrogen cylinders and selector valves. Located outside the units are ideal for extra protection of car decks, heli decks
cargo area, the powder centrals capacity is determined by and cargo decks on chemical tankers.
the number of connected hose stations and monitors.
Hybrid system
Monitors and hose stations are installed on the cargo deck, An economic solution for larger Gas Carriers, the hybrid
positioned to protect the manifold by at least to hoses at system gives the discharge volume exibility of a central
any point. Monitors are operated from an adjacent release system but with reduced pipe work installation costs.
cabinet or remotely from aft of the cargo area. The hose
stations have integrated release cabinets. Compliance
For use on merchant marine and offshore structures,
Modular system compliant with IGC and IBC codes and in compliance with
Self-contained hose and monitor units eliminate the need Class requirements.
Unitor High expansion foam re extinguishing system is a total ooding system ideal for
protecting machinery spaces (category A) such as engine rooms, purifier rooms and
incinerator rooms, as well as pump rooms. It can be installed as a total ooding system for
the entire engine room or for individual compartments. It is highly effective and safe both for
your crew and the environment, making it a viable alternative to CO2.
Applicable to
t Engine rooms
t Pump rooms
t Compressor rooms
t Electronic and storage spaces
Benets
t Foam expansion rate of 1:700 using the air in the t Safe and harmless for crew
installation space, no need for air ducting and fans for t Can run on fresh or sea water
external air supply t Space saving, lightweight and cost efficient alternative
t Improved lling rate of 1.8 metres per second - proven to to CO2
be most effective for machinery space res t Foam leaves no hazardous decomposition products
t Sequential release design - optimised protection and t Minimal and easy maintenance
reduced water capacity needed t Low service and maintenance cost
t Quick release reduces re and heat damage to
equipment and structure
t Foam generators come in three sizes, giving exibility in
design and installation onboard
t The foam is generated in situ, no need for external foam
generating room
Common conguration
Technical data
Tank
Type cylindrical
Material GRP (glass bre)
stainless steel on request
Opening full size manhole for inspection
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
The system consists of a storage tank for foam liquid, foam Options
pump and proportioner located in the foam central room. The Unitor High expansion foam system can be designed
The foam is mixed with water in the proportioner and for sequential release by splitting the system and spaces in
discharged through the foam generators. These generators several distribution lines. This unique operation feature
are installed at the highest level in the protected space, optimises protection of high risk areas and reduces the
at strategic locations above high risk areas. The water/ required water capacity. The system can also be combined
foam mixture blends with air in the generators. Unlike other with Unitor Local application re ghting system providing
systems, the Unitor High expansion foam system uses the
air in the protected space, meaning no ducting or fans are Compliance
required. The foam falls directly down from the generators, t Complies with SOLAS and approved by major
covering the entire protected space, quenching the re. classication societies
t Extensive indepentent testing in accordance with IMO
The system can be remotely operated by the main control MSC/Circ. 1384
cabinet, or via the local control cabinets. Manual operation t Foam testing according to IMO MSC/Circ. 670
is also possible by opening the valves and starting the water t Foam concentrate complies with requirements of
and foam pump manually. European Council Directive 96/98 on Marine Equipment
Directive (MED)
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
Unitor Low expansion foam re extinguishing system effectively protects open space areas
like the cargo deck from res. Foam is lighter than combustion materials such as oil or petrol,
and forms a stable blanket on top of these, sealing against oxygen, effectively extinguishing
the re and reducing radiated heat.
Designed for simple, reliable operation the new generation foam monitor changes from jet to
fog operation in one smooth movement, giving better control of the foam coverage area.
Applicable to
t Cargo tank areas
t Tanker stern
t Bow loading areas
t Helidecks
t Open spaces on offshore supply vessels and oil,
product and chemical tankers
t Bilge areas
t Purier rooms
t Floating storage facilities and offshore structures
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
Common conguration
Technical data
Monitor Mixing equipment
Capacity (l/min) 1000 12500 Type balanced pressure proportioner or inductor
Material stainless steel Capacity (l/min) 75 to 20,000
Max working pressure 16 bar Material stainless steel and bronze
Applicator Pump
Capacity (l/min) 400 Type centrifugal multi stage
Material stainless steel (& positive displacement)
Pressure (bar) 3 or 6 Material stainless steel
Technical description The foam tank is available in a range of sizes, the size is
The system consists of a reinforced foam tank, foam pump, determined by application area and calculated period of
proportioner, foam monitors and portable foam applicators operation. The tank is normally made from Glass fibre
or foam spray nozzles. All components are sturdy and reinforced plastic (GRP). There are three advantages to this:
corrosion resistant. t Non-corrosive, some foam concentrates corrodes steel for
instance
The monitors, portable applicators and foam spray nozzles t Chemically stable, protecting the foam from contamination
are used either individually or in conjuntion to effectively put t Strong, lightweight material
out the re. Portable applicators cover shadow areas not
reachable by the monitors. Installation
The foam central components can be delivered on skids,
The Unitor low expansion foam system can also be used in reducing installation time and cost. Monitors are placed at a
machinery spaces as an addition to a total ooding system. safe distance from the protected area along the deck, with
Foam will then be discharged from xed outlets like foam two monitors on the poop deck. Number and spacing of the
spray nozzles. For this set up inductor type portable foam monitors, foam tank capacity and system pressure/capacity
applicators are also required. is dependant on vessel type and protection area.
Foam testing
Foam concentrate supplies used to top up fixed systems
should be of the same generic type and come from
the same manufacturer as the original one to ensure
compatibility. For more information, please contact
Wilhelmsen Ships Service Customer Services.
Note
It is vital that the foam concentrate used is suited to the
cargo onboard. Water alone is ineffective, since the burning
liquid will oat on it and spread further.
Features Benets
The applicator is made of stainless steel and has a self-suction t4FMGTVDUJPOIPTF
OPOFFEGPSBEEJUJPOBMQSPQPSUJPOFS
hose, which eliminates the need for an additional proportioner. t-JHIUXFJHIU
FBTZUPDBSSZBOEPQFSBUF
t3BQJEDPOOFDUJPOUPmSFNBJOT
Wilhelmsen Technical Solutions offers a complete annual
t$BOCFVTFEFWFOXJUIBMPXQSFTTVSFXBUFSTVQQMZ
service program for the system, which meets all relevant
because the mixer is tted on the end of the line, assuring
requirements.
less loss of pressure
Compliance
MSC.217 (82), Ch. 4, Sec. 3.
Benets
t 'PBNBWBJMBCMFJOLFZQPSUT
t 5FDIOJDBMFYQFSUJTFXPSMEXJEFBWBJMBCMF
t 'PBNDPODFOUSBUFUFTUTUBUJPOTJOLFZQPSUT
t 'SFFTBNQMFCPUUMFTDBOCFPSEFSFE
Product no. 530 576496
Applicable to
t Engine rooms
t Pump rooms
t Compressor rooms
t Effectively suppresses re by isolation the oxygen and t Safe for both crew and the environment
reducing temperature by evaporation t Safe to activate immediately even in manned areas
t Improved efciency nozzles use less water, and require t Both fresh and sea water can be used
smaller dimensions on all system components t Skid mounted solutions available for easy installation
t Automatic and manual release options t Minimal maintenance required, low maintenance cost
t Low pressure PN16 dry piping between protected areas t Easy and cost efcient operation
t Low pressure system, smaller dimensions on pumps and
piping, and smaller maintenance cost than high pressure
systems
Common conguration
Technical data time to evacuate while activation of the total ooding system
Nozzles is considered. Often, immediate activation of the local
Type full-jet application system is enough to stop the re completely.
Material brass
The system is build up by three main groups of components;
Water capacity @4bar (l/min) 8.5/36
the sector valve register, distribution piping with nozzles and
control panels
Pump
Type centrifugal multistage t The sector valve register contains distribution valves
Material stainless steel corresponding to the different protected installations. The
Voltage/ frequency (V/Hz) 3x400/50 and 3x440/60
valves can be operated remotely from the main control
panel or from the manual release boxes close to the
Insulation and enclosure Class F, IP 55
protected object/area.
t The distribution piping with nozzles; from each distribution
System description valve, the piping leads to the nozzle spread out in a grid
The system uses low pressure water nozzles installed in pattern above each protected object/area.
single, row or grid pattern depending on the best way t The system can be operated centrally from a main control
to protect the equipment. For optimal performance, low panel and also from manual release boxes close to the
pressure PN16 piping is used. protected object/area.
Installation
Separate protected objects or areas have individual dry
piping leading from section valves to the nozzles. This Modular skid based units makes installation easy and the
ensures that the piping only contains water when the system footprint small
is in use, lowering maintenance needs. Compliance
The valves can be remotely operated from a central control t SOLAS requirements and approved by major classication
panel, and from manual release boxes near the protected societies (AICS)
area. For extra quick release, automatic detection and t Extensively independently tested according to IMO MSC/
release function can be added. Since the system uses Circ. 913 and Circ. 668
water as the extinguishing agent, it can be released t Nozzle approved by Marine Equipment Directive (MED)
immediately with no risk to personell. This gives the crew
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
Applicable to
t Dry cargo holds
Features Benets
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
t Automatic air sampling and monitoring of up to 48 cargo t Repeater panels allow for monitoring from key locations
holds simultaneously onboard
t Utilises existing CO2 pipework t One button control for simple testing and resetting
t Completely automated and self-adjusting t Cost efcient compact and modular design
t Explosion protected to IEC79 and EN 50 020
t Fans switch automatically every 24 hours to give even
load on motors
Common conguration
Technical data
Smoke detection panel Extension panel
SDS-0 smoke detection panel without built-in detection lines SDS-E4 extension panel for a maximum of 4 additional detection lines
SDS-4 smoke detection panel with 14 detection lines SDS-E8 extension panel for 58 additional detection lines
SDS-8 smoke detection panel with 58 detection lines SDS-E12 extension panel for 912 additional detection lines
SDS- smoke detection panel with 912 detection lines SDS-E16 extension panel for 1316 additional detection lines
Enclosure type IP66 Enclosure type IP66
Compliance
t SOLAS chapter II -2
t FSS code chapter 10 MSC292
t Explosion protected to IEC 79 and EN 50 020
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
Ideal for vessels that require a clean, dry inert gas for
maintaining a non-explosive athmosphere in cargo tanks, for
preservation of cargo quality and on LNGC to prevent icing
damage on the insulation.
Applicable to
t Chemical and product tankers
t LPG and LNG tankers
t Supply vessels
t Offshore installations and mobile units
t Reefer ships
Features
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
Benets
t Advanced high quality bre technology ensures the t Smaller compressor gives lower energy consumption
highest nitrogen purities ranging between 95-99.9% t Silent, unattended operation
t The system requires 10-40% less compressed air, in t Cost efcient operation
combination with long life membrane modules, and low t Well-known and tested technology
maintenance requirements, this gives signicant t Fewer moving parts gives low maintenance cost
operational savings t Small footprint
t Range from small topping-up generators to large total
inert gas systems
t Full range of standardised components give exible
customisation to each vessels needs
t Digital information on all key values, such as temperature,
purity and pressure control
Common conguration
Technical data
N2 Generators Product specication
Standard cabinets up to 500 Nm3 /h@95% Capacity 10 -4500 Nm3
Standard open skid design up to 2800 Nm3 /h@95% Purity 95-99.9%
Custom made solutions available Dew point -70C
Process controlled PLC Pressure approx 12 bar
Ambient temperature 3C - 45C Temperature approx 50C
Pressure 6-14 bar Oil content in product less than 10ppb
Air temperature 45C Particles in product max 0.01 micron
Compressors
Type oil ooded screw compressors
Control method modulating control
Pressure 13-14 bar
Cooling air, fresh or sea water cooled
Power consumption starting from 27kW per 100 Nm3/h@95% N2
Starting method star/ delta
System description
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
By lling the voids in the cargo holds with nitrogen, oxygen Simple automated operation PLC control of nitrogen
levels are lowered below 8%, creating a non.ammable generator parameters provides easy operation and
athmosphere. Nitrogen is very efcient and the only common inspection, whilst automatically monitoring product purity.
inerting gas that does not contaminate the cargo. Auto-ventilation prevents off-spec gas from being delivered
to the rocess.
The nitrogen generator system works by separating air into
its component gases by passing compressed air through Installation
a bundle of hollow bre, semi-permeable membranes. The Compact, modular system comes fully assembled on skids
membranes separate nitrogen from oxygen, CO2 and other making installation easy and cost efcient
trace gases. Once the trace gases are diverted, the resulting Indoor, outdoor or containerised installation location
Nitrogen has a purity between 95%-99.9%.
Service
Depending on the application, the nitrogen can be delivered Spare parts, system inspections and after sales services are
directly to the protected space or stored in a receiver tank. If delivered worldwide.
the system is tted with a high pressure booster compressor,
it is possible to recharge nitrogen cylinders as well. For all your nitrogen service, spare parts or technical service
requirements, please email us at
To ensure high purity nitrogen production over time, the wts.nitrogen@wilhelmsen.com
Unitor - Generon Membrane inert gas system treats the feed
air to the highest quality with minimal water, oil and particle
content. This keeps the membranes in good condition and
maintenance costs down.
)4407*,)&,-7&#/..&4733'2/.4&.%-&%*"#".+
!"'&48834&-360%'9*%
93/52$&0"(&
Listed below are our main locations for safety systems, please contact the one most convenient to you.
Nitrogen service
For all your nitrogen service, spare parts or technical service
requirements, please email us at
wts.nitrogen@wilhelmsen.com
Korea
RM307, March Building, 718-4, Maehak-Ri,
Jeonggwan-Myeon,
Gijang-Gun, Busan,
Korea (619-963) AMERICAS
wts.asia@wilhelmsen.com
North America
Phone: (+82 51) 7207912 4130 SW 28th Way
Fax: (+82 51) 7287100 Ft. Lauderdale
FL 33312
USA
Japan wts.namerica@wilhelmsen.com
2-63 Nishihama-cho, Imazu,
Nishinomiya-city, Hyogo Prefecture Phone: +1 (954) 585-5800
663-8225, Japan Fax: +1 (954) 585-5896
wts.asia@wilhelmsen.com
MARITIME LOGISTICS
SHIPS AGENCY
856
SHIPS AGENCY
Please visit the Network Directory on our website for a complete list of ships agency contact details per country and port:
wilhelmsen.com/shipsservice
857
WILHELMSEN SHIP SERVICE TERMS AND CONDITIONS FOR
SALE OF GOODS AND SUPPLY OF GAS CYLINDERS
Revised December 2010
1. Range of application places or ports requested, which are not listed in the Com- taken. Any deposit fee paid by the Customer for that relevant
These Conditions apply to all sales of goods (including gases) panys port index (http://www.wilhelmsen.com/SERVICES/ gas cylinder will not be refunded and may be retained by the
and the supply of gas cylinders from Wilhelmsen Ships Service MARITIME/COMPANIES/BUSS/Pages/buss.aspx), deliveries Company. If no deposit fee is previously paid, the Company
AS (a company within the Wilh. Wilhelmsen ASA Group of are made EXW (ICC Incoterms 2000). will charge the Customer with a further fee equal to the deposit
Companies that owns the trademarks Wilhelmsen Maritime For destinations, places or ports requested, which are listed fee according to the Companys price list in effect at the time
Services, Barwil and Unitor), its subsidiaries and author- in the Companys Port Index (but not being a Free Delivery the Customer informs the Company.
ised distributors (the Company). Port), deliveries are made FCA to the Company s warehouse In case the Customer returns to the Company a Unitor gas
A customer placing an order with the Company (the Cus- (ICC Incoterms 2000), transportation costs to Customer will be cylinder not registered to be in the Customers possession, the
tomer), or the acceptance by the Customer of the goods and/ charged to the Customer subject to quotation. Customer will not be entitled to refund of any deposit fee paid
or gas cylinders delivered by the Company, whichever occurs by another customer for such gas cylinder.
rst, shall constitute the Customers acceptance of these For Free Delivery Ports listed in the Companys price list,
Conditions and the express exclusion of the Customers condi- deliveries directly to the vessels are made FAS (ICC Incoterms 8. Risk/Retention of title
tions of purchase. 2000) and deliveries to places other than alongside the ship The goods (including gases) and the supplied gas cylinders
All sales of goods and supplies of gas cylinders are deemed to are made FCA (ICC Incoterms 2000), unless otherwise stated are at the risk of the Customer from the time of delivery. The
be made to the vessel to which the goods and gas cylinders in the Companys order conrmation. If the parties initially have ownership and title to the purchased goods (not gas cylinders,
are delivered or are to be delivered, and for and on behalf agreed on delivery FAS (ICC Incoterms 2000) and the Com- see Condition 7) passes to the Customer when the Company
of the vessel, its master, its owners and such other party or pany is subsequently instructed for whatever reason to deliver has received payment in full of the purchase price, including
parties who has or have placed the order and/or accepted the goods at a place other than alongside the ship, the delivery interest and costs where applicable.
the goods and/or the gas cylinders, and all contracts shall conditions are altered to FCA (ICC Incoterms 2000) at the new
be deemed to be concluded with the master of the vessel, place, except as provided below. If the Company has not received payment for the goods, the
the owners of the vessel and such other party or parties as gases or the deposit for the gas cylinders within 30 days from
For all ports, even if listed as a Free Delivery Port in the Com- the invoice date, the Company shall, without any court order
described herein. panys price list, the Companys costs and expenses related to or other process of law, have the right to retake possession of
If an order is placed by a Customer as agent for a principal the following additional services will be charged at cost: the goods, the gases and the gas cylinders wherever they are
(disclosed or undisclosed), then such Customer shall be liable tCBSHF
CPBUPSDSBOFIJSF located. The Customer hereby grants the Company permission
jointly and severally with such principal for the payment of all
tSVTITIJQNFOUPGQSPEVDUTOPUDPNNPOMZSFRVFTUFEBU to enter onto any of its vessels, property or premises or those
amounts due and the performance of all obligations under
the place of delivery. of any of its subsidiaries or afliates in order to retake posses-
these Conditions.
sion of such goods, gases and gas cylinders. The Customer
Any applicable delivery costs and expenses shall be advised is obliged to assist the Company in retaking possession. The
by the Company in quotations and order conrmations. Company is entitled to claim and recover full compensation
2. Order conrmation Overtime and waiting time of more than 60 minutes will be for all costs and expenses in and out of court and all legal
If a Customer does not without undue delay after receipt of an charged to the Customer for deliveries at ports not listed as a costs and other expenses incurred by the Company in retaking
order conrmation notify the Company in writing of any inac- Free Delivery Port in the Companys price list. The Companys possession.
curacies, the order conrmation is considered to be expressly normal opening hours at all places of delivery are listed at the
agreed between the parties. The Company is not responsible Companys network directory.
for obvious errors and deciencies in an order conrmation. If the Customer is obliged to pay the purchase price or deposit 9. Delay
before or at the delivery, and payment has not been made, or Subject to the provisions in Condition 11 (including, without
3. Price and payment for goods deposit and fees for gas the Customer has failed to pay any other amount due and pay- limitation, Force Majeure), if the delivery of the goods or gas
cylinders able to the Company, the Company is not obliged to hand over cylinders are delayed, and this is not due to the Customer or
the goods or the gas cylinders or otherwise transfer control circumstances on its part, the Customer may cancel the order
The purchase price for the goods sold is stipulated in accord- over the goods or the gas cylinders without simultaneous pay- if and when the delay constitutes a fundamental breach and
ance with the Companys price list in force at the time and ment of all overdue amounts. the Company thereafter has been given the opportunity to
place of delivery. deliver the goods or gas cylinders within reasonable time.
For gas cylinders supplied by the Company, the Customer The Customer loses any right to cancel the order if a claim for
shall pay a deposit and associated fees in accordance with the 6. Properties of goods and gas cylinders
cancellation is not submitted to the Company in writing within
Companys price list in force at the time and place of delivery. The goods and gas cylinders shall be in conformity with infor- three days from the agreed delivery date.
The gas cylinders shall be returned to any one of the Com- mation given in the Companys product guide as effective from
panys depots. Subject to Conditions 4 and 7, the deposit shall time to time (http://www.wilhelmsen.com/services/maritime/ Except as provided by this Condition 9, the Customer shall
then be refunded in accordance with the terms of the cylinder companies/buss/products/Pages/default.aspx). The Company have no further rights or claims whatsoever in respect of any
agreement in effect. reserves the right to amend its product guide and the product delay in delivery on the part of the Company.
The Company shall not be responsible for any tax, duty, levy, specications at any time without notice. The Company may in
import/export charges, environmental fees or other charges its sole discretion provide goods not listed in the Companys 10. Lack of conformity
of any kind imposed by the state or state authority where product guide.
Subject to the provisions in Condition 11, in the event of lack
the goods and gas cylinders are delivered, by reason of the
of conformity of the supplied goods or gas cylinders with the
delivery of the products to the Customer (other than tax on 7. Title to gas cylinders order conrmation at the time of delivery which is not due
the Companys overall net income) and which should be paid
The Company shall retain ownership and title to the Unitor to the Customer or circumstances on its part, the Company
by the Customer. The Customer shall fully reimburse the
gas cylinder while it is in the Customers possession. The shall at its sole discretion rectify the lack of conformity, deliver
Company in respect of any claims or expenses incurred in
Companys gas cylinders delivered to and from the Customer substitute goods or gas cylinders or reduce the purchase price
connection with such taxes and charges, such amount to be
will be registered and updated by the Companys electronic of the goods proportionally to the lack of conformity.
added on the Companys invoice.
tracking system. The Customer will receive a user ID and The Customer loses any claim based on lack of conformity
The Customer shall pay the purchase price, the deposit and password to the Companys cylinder web page where the where such lack of conformity would have been discovered on
any other amount due in full, free of bank charges, as specied Customer will have access to monitor such cylinders on board reasonable inspection at the time of delivery, or if the Customer
in the invoice at the latest within 30 days from the invoice all of the Customers ships. does not make a claim in writing to the Company as soon as
date. The Company shall be entitled to claim interest of 2%
The Company will charge its Customers a deposit fee to the lack of conformity should have been discovered. In any
per month (before as well as after judgement) on any overdue
ensure correct return of the Companys gas cylinders, as per event the Customer loses its claim based on the lack of con-
payment from the due date until payment in full is received by
Conditions 3 and 4. formity if it does not submit a claim in writing to the Company
the Company. If payment is overdue, the Company is entitled
within 30 days after the delivery of the relevant goods or gas
to claim and recover full compensation for collection costs and The Customer may, without prior notice to, additional payment cylinders.
expenses in and out of court and all legal costs and expenses to, or approval from the Company, assume title to any Unitor
on a full indemnity basis. gas cylinder in its possession and transfer title to such cylinder Except as provided by this Condition 10, the Customer shall
to any third party, provided always that the Customer complies have no further rights or claims in respect of lack of conformity
with the provisions of paragraph 4 of this Condition 7. In case on the part of the Company.
4. Equal exchange of gas cylinders the Customer (i) destroys or damages, (ii) defaces, (iii) loses, (iv)
If the Customer orders supply of gas, the Company shall sup- delivers the Unitor gas cylinder to a third party not authorised 11. Limitation of liability
ply to the Customer a lled Unitor gas cylinder against receipt by the Company or (v) does not return the Unitor gas cylinder
of an empty Unitor gas cylinder of the same kind. In such to the Companys possession, control and test/maintenance 11.1 Entire financial liability
cases the deposit paid by the Customer shall not be refunded system within a period of 18 months from receipt of delivery Subject to Condition 9 and Condition 10, the following provi-
and a supplementary deposit may be charged or credited to from the Company (or the Companys authorised third party), sions set out the entire nancial liability of the Company (in-
reect the Companys price list in effect at the time and the the Companys ownership to the gas cylinder shall cease cluding any liability for the acts or omissions of its employees,
price and payment terms stated in the applicable cylinder immediately. agents and sub-contractors) to the Customer in respect of (i)
agreement. When the Companys ownership to a gas cylinder ceases any breach of any contract to which these Conditions apply, (ii)
in such events as stated in paragraph 3 of this Condition 7, any use made or resale by the Customer of any of the goods,
any obligation or liability on the Company with regard to the or of any product incorporating any of the goods and (iii) any
5. Delivery
gas cylinder shall terminate immediately, and the Customer representation, statement or tortious act or omission including
The goods and gas cylinders shall be delivered at the time shall remove the Unitor trade name from the cylinder and negligence arising under or in connection with any contract to
and date agreed upon between the parties. For destinations, immediately inform the Company in writing about the actions which these Conditions apply.
858
11.2 Exclusion of implied warranties, conditions and terms Customer, and shall take such action as is reasonably necessary Assets Control (OFAC) regulations respecting USD pay-
All warranties, conditions and other terms implied by statute to advise others, who are foreseeably users of the goods or gas ments, the Company cannot facilitate USD payments in any
or common law are, to the fullest extent permitted by law, cylinders of the suspected or proven hazards of the goods and transaction related to OFAC sanctioned entities, either directly
excluded from any contract to which these Conditions apply. gas cylinders and the proper handling of the goods and gas cyl- or indirectly. As of the effective date of these Conditions,
inders. The Customer assumes all risk and liability for the proper sanctioned entities include the countries of Burma, Cuba, Iran,
use and handling of the goods and gas cylinders after delivery North Korea, Sudan and Syria, and certain named persons
11.3 Liabilities not excluded or limited and shall indemnify the Company and hold the Company harm- linked to those countries. The Company may be required to
less from all consequences including but not limited to all liability, request information from the Customer which supports a
Nothing in these Conditions excludes or limits the liability of the costs and expenses whatsoever arising from improper use or verication statement which New York intermediary banks may
Company (i) for death or personal injury caused by the Com- improper handling, including claims by third parties. require according to the OFAC regulations, including whether
panys negligence or (ii) for any matter which it would be illegal a person is a specially designated national listed by OFAC
for the Company to exclude or attempt to exclude its liability or or any executive order, or a national of any country with
(iii) for fraud or fraudulent misrepresentation. 13. Intellectual property rights which transactions are regulated by OFAC. The Customer shall
The Company shall retain ownership to any and all intellectual provide timely and truthful responses to any such reasonable
11.4 Indirect loss - cap property rights in relation to the goods and cylinders supplied enquiries the Company may make to support any required
under these Conditions. Such intellectual property rights shall verication statements.
Subject to condition 11.2 and condition 11.3, (i) the Companys include but not be limited to trade marks, patents, copyright,
total liability in contract, tort (including negligence or breach names, styles and designs used in relation to the supplied
of statutory duty), misrepresentation, restitution or otherwise, goods and gas cylinders (whether or not registered or capable 16. Governing Law disputes
arising in connection with the performance or contemplated of registration), and shall include all goodwill associated there- These Conditions and all contracts to which these Conditions
performance of any contract to which these Conditions apply with. The Customer shall not be granted any rights from the apply and any non-contractual obligations arising out of or
shall be limited to the contract price received by the Company use of the Companys intellectual property rights. in connection with such contracts shall be governed by, and
and (ii) the Company shall not be liable to the Customer for loss construed in accordance with, English law.
of prot, loss of business, or depletion of goodwill in each case
whether direct, indirect or consequential, or any claims for 14. Ethical standards Any dispute arising out of or in connection with a contract to
consequential compensation whatsoever (howsoever caused) which these Conditions apply shall be referred to arbitration
which arise out of or in connection with any contract to which 14.1 Compliance in London in accordance with the Arbitration Act 1996 or
these Conditions apply. The parties agree that neither party shall: any statutory modication or re-enactment thereof save to
the extent necessary to give effect to the provisions of this
(a) offer or agree to give any person working for or engaged by Condition. The arbitration shall be conducted in accordance
11.5 Customers specifications and installations the other party any gift or other consideration, which could act with the London Maritime Arbitrators Association (LMAA)
as an inducement or a reward for any act or omission to act in Terms current at the time when the arbitration proceedings
For products ordered and specied by the Customer, not connection with the applicable cylinder agreement or any other
forming part of the Companys product guide, (cf Condition 6), are commenced. The reference shall be to three arbitrators.
agreement between the parties; A party wishing to refer a dispute to arbitration shall appoint
the Company assumes no liability whatsoever, and disclaims
any express or implied warranty relating to sale and/or use of (b) enter into a cylinder agreement or any other agreement with its arbitrator and send notice of such appointment in writing
such product, including liability or warranties relating to func- the other party if it has knowledge that, in connection with it, to the other party requiring the other party to appoint its own
tional ability for a specic application/use, merchantability, or any money has been, or will be, paid to any person working for arbitrator within 14 calendar days of that notice and stating that
infringement of any patent, copyright, or any other intellectual or engaged by the other party or that an agreement has been it will appoint its arbitrator as sole arbitrator unless the other
property right. The Company shall in no event be liable for any reached to that effect unless (i) details of any such arrange- party appoints its own arbitrator and give notice that it has
damage to products manufactured, assembled or installed by ment have been disclosed in writing to the other party prior done so within the 14 days specied. If the other party does
the Customer of which the goods sold hereunder form a part. to the execution of the agreement and (ii) approval of such not appoint its own arbitrator and give notice that it has done
arrangement by an authorised representative of the other party so within the 14 days specied, the party referring a dispute
has been obtained; to arbitration may, without the requirement of any further prior
11.6 Transfer of title to gas cylinders (c) offer, pay or promise to pay either directly or indirectly, any- notice to the other party, appoint its arbitrator as sole arbitrator
thing of value to a Public Ofcial in connection with a cylinder and shall advise the other party accordingly. The award of a
The Company shall under no circumstance be liable for any sole arbitrator shall be binding on both parties as if he had
loss or damage whatsoever and howsoever arising in relation agreement. The parties further agree that in the performance
of their respective obligations under the cylinder agreement, been appointed by agreement. Nothing herein shall prevent the
to, or in any way connected with any cylinder if transfer of title parties agreeing in writing to vary these provisions to provide
as referred to in Condition 7 has taken place. the parties and their respective agents, sub-contractors and
employees shall comply with all applicable laws, rules, regula- for the appointment of a sole arbitrator. In cases where neither
tions and orders of any applicable jurisdiction, including the the claim nor any counterclaim exceeds the sum of US$50,000
OECD Convention on Combating Bribery of Foreign Public (or such other sum as the parties may agree) the arbitration
11.7 Force Majeure
Ofcials in International Business Transactions. The Customer shall be conducted in accordance with the LMAA Small Claims
If the Company is unable to make delivery or to make delivery Procedure current at the time when the arbitration proceedings
shall notify the Company immediately in writing with full par-
within the agreed delivery time, owing to Force Majeure, or are commenced. Nothing stated previously in these Conditions
ticulars in the event that the Customer receives a request from
events beyond the reasonable control of the Company or shall preclude the right of the Company to seek security or
any Public Ofcial requesting illicit payments; or
events that could not be reasonably foreseen by the Company interim orders (by means of any appropriate remedy or relief,
when the order was placed or the order conrmation was is- (d) take any other action which results in a breach by either including but not limited to in rem arrests, injunctions, attach-
sued, the Companys obligation to deliver shall cease or, if ap- party of any applicable anti-corruption legislation. ments, seizures, sales, detention, the exercise of a lien or
propriate, be suspended for the duration of such obstructions. In this clause 14, the term Public Ofcial means (i) any ofcial otherwise howsoever) according to local law and legislation for
The Companys obligation shall also cease or be suspended in or employee of any government agency or government-owned claims under all contracts to which these Conditions apply in
the event of delay due to security arrangements, incidents or or controlled enterprise, (ii) any person performing a public any jurisdiction the Company sees t.
other similar event in the port whether or not the delay could function, (iii) any ofcial or employee of a public international
be considered within the Companys reasonable control or to organisation, (iv) any candidate for political ofce or (v) any
be reasonably foreseeable by the Company. Force Majeure political party or an ofcial of a political party. 17. Severability
means any industrial disputes, riots, mobs, res, oods, wars, If any provision of these Conditions or of any contract to which
embargo, shortage of labour, power, fuel, lack of means of these Conditions apply is or subsequently becomes void, un-
transportation or general lack of other necessities, regulations 14.2 Breach of ethical standards enforceable or illegal, that shall not affect the validity, enforce-
or orders from any governmental agency, port or ship security ability or legality of the other provisions of these Conditions or
control or any other circumstances beyond the control of the If the Customer or any of its agents, sub-contractors or em-
ployees breaches condition 14.1, the Company may terminate of any contract to which these Conditions apply.
parties. The Company is in no event liable for loss or damage
resulting from delay due to any of the circumstances men- the cylinder agreement by written notice with immediate effect.
tioned in this Condition 11.7. Any termination pursuant to this condition 14.1 shall be without
prejudice to any right or remedy that has already accrued, or 18. Counterparts
subsequently accrues, to the Company. A contract to which these Conditions apply may be executed
12. Indemnication in any number of counterparts and this has the same effect as
if the signatures on the counterparts were on a single copy of
The Customer shall comply with all warnings, instructions and 14.3 Determination by Company such contract.
safety rules provided to it by the Company from time to time
and shall acquaint itself with and apply best industry practice Notwithstanding condition 16 (Governing Law - disputes), any
at all times in relation to the storage, handling and use of all dispute relating to:
19. Third party rights
goods and gas cylinders. (a) the interpretation of conditions 14.1 and 14.2; or
A person who is not a party to a contract to which these
The Customer acknowledges that the goods sold and the gas (b) the amount or value of any gift, consideration, inducement Conditions apply has no right under the Contracts (Rights of
cylinders supplied under these Conditions are, or may be, or reward referred to in condition 14.1, Third Parties) Act 1999 to enforce or to enjoy the benet of any
hazardous to human health, and the Customer assumes all shall be determined by the Company and such determination term of such contract.
risk and liability for the use of the goods and gas cylinders. The shall be nal and conclusive.
Customer shall familiarise itself and keep itself informed with
respect to possible hazards to persons or property involved
in the handling and use of the goods and gas cylinders. The 15. OFAC compliance
Customer shall advise its employees, independent contractors
and others who handle the goods and gas cylinders for the Pursuant to the U.S. Department of Treasury, Ofce of Foreign
859
Optimising performance
ID No: 812212. Printer: Erik Tanche Nilssen - Norway. 11.12. 12K. Country of origin Norway.
marine products
Marine Chemicals
safety
Part of Wilhelmsen Maritime Services, maritime logistics
a Wilh. Wilhelmsen group company ships agency