Documente Academic
Documente Profesional
Documente Cultură
1. Draw the stress-strain diagram for mild steel and explain the behaviour of the material.
2. Explain the terms principal stresses and principal planes.
3. Explain the terms: (i) Creep (ii) Hooks law (iii) Poissons ratio (iv) Proof stress
4. Define the terms stress, strain, modulus of elasticity, modulus of rigidity and bulk modulus.
5. Draw the stress-strain diagram for mild steel and explain the salient points.
6. Prove the relationship between modulus of elasticity (E), rigidity modulus (G) and bulk modulus (K).
7. Define principal planes and principal stresses.
8. Explain what do you mean by complementary shear.
UNIT-II (Bending Stress & Shearing Stress)
9. State the assumptions made in deriving the bending equation. Explain the significance of each
assumption.
10. Distinguish between pure bending and ordinary bending.
11. Explain the relationship between shear force and bending moment.
12. State the assumptions made in the theory of simple bending.
13. How will you derive the basic equation of elastic curve?
14. What are flitched beams?
VAy
15. Derive the equation, q = with usual notations.
Ib
UNIT-III (Tortion of Shafts, Springs & Pressure Vessels)
24. What is meant by shear centre ? Explain the significance of this term.
25. Explain the concept of unsymmetrical bending. What are the conditions that should be satisfied for a beam
to bend without twisting?
26. State the assumptions made in analysing a beam for unsymmetrical bending.
27. Derive the expression for the principal moment of inertia Iuu and Ivv in terms of Ixx and Iyy for the axes U-U
and V-V rotated through angle from x-x and y-y axes.
28. Define-(i) Principal axes, (ii) Product moment of inertia, (iii) Equivalent length of a column.
29. What is unsymmetrical bending? Explain with neat sketches.
30. Discuss briefly the theories of failure for brittle material.
31. What is meant by conjugate beam? State the relationship between the real beam and conjugate beam.
32. Define (I) Resilience, (ii) Proof resilience, (iii) Modulus of resilience
T C
33. State the assumptions made in the derivation of the equation
IP R l
34. State the assumptions made in the Eulers theory for long column.
35. Derive the Eulers buckling load for the column when both ends are hinged.
T C
36. Derive the equation:
IP R l
37. Prove that the change in volume of a spherical shell of diameter d and internal pressure p is
pd 4 1
V [1 ] where t is the thickness of the shell.
8tE m
38. State the middle third rule.
39. Define Core of a section.
40. Define (I) slope, (ii) Deflection of a beam.
41. State the relationship between slope, deflection, radius of curvature.
42. State principal of superposition which is applied to analysis of fixed beam.
43. State the value of limit of eccentricity for solid circular section. What will be the minimum value of resultant
stress if the load is applied at the position of limit of eccentricity?
44. State middle third rule. Sketch core of rectangular section.
45. State the differential equations for slope and deflection.
46. Write the advantages and disadvantages of fixed beam over simply supported beam.