Documente Academic
Documente Profesional
Documente Cultură
Electrostatic
Precipitator
IECO
High-voltage unit
Support insulator
with ring-type heater
Suspension of the
electric spraying system
with rapping drives
Gas distribution
Gas outlet
Corona discharge
electrodes
Collecting electrodes
The RIECO-BETH dry electrostatic precipitator can be electrode plates, the process gas and the dust particles
used to extract fine dust particles from process gases up are electrically charged.
to a temperature of 4000 Celsius by means of an artificial
On the route through the electric field, the charged
electrostatic charge.
particles are transported to the collecting electrode plates
Principle of Operation by the electric field strength, where they agglomerate with
the existing dust particles which are then knocked off by a
The dust-laden process gas enters the electrostatic
motorised tumbling type Rapping Hammer System.
precipitator horizontally, and is spread to a uniform flow
profile across the entire filter cross-section by means of a The rapped off dust particles drop into the ESP hopper
gas distribution system. and are removed through the dust discharge system. The
purified gas leaves ESP through the gas outlet cone.
By means of the high voltage (110 KV) applied between
the corona discharge electrodes and the collecting
ADVANTAGES
AU VE
RI
BURE
IECO
ISO 9001
TA S
1162/2, Shivajinagar, Behind Observatory, Pune - 411 005 (INDIA) BUREAU VERITAS
Certification UKAS
Phones : 91-20-25535384, 25535215 Fax : 91-20-25533229
QUALITY
1828 MANAGEMENT
008
E-mail : rieco@rieco.com / s_pune@rieco.com Website : www.rieco.com
Regional Offices at :
4-01-106