Documente Academic
Documente Profesional
Documente Cultură
Surfaces
Tolerances
DX 51 D + Z 1.0226 270500 22
DX 52 D + Z 1.0350 140300 270420 26
DX 53 D + Z 1.0355 140260 270380 30
DX 54 D + Z 1.0306 120220 260350 36 1.60 0.18
DX 56 D + Z 1.0322 120180 260350 39 1.90 0.21
DX 57 D + Z 1.0853 120170 260350 41 2.10 0.22
Other steel grades in accordance with works or international standards on request. Material properties in accordance with current standards.
1) If the yield strength is not pronounced, the values for the 0.2% offset yield strength Rp0.2 apply. If the yield strength is pronounced, those for the lower
yield strength ReL apply.
2) For product thicknesses from 0.50 < t 0.70 mm (including coating) the minimum elongation A80 values decrease by 2 units, for t 0.50 mm by 4 units.
3) For thicknesses > 1.50 mm, the r values decrease by 0.20.
4) If the yield strength is pronounced, the upper yield strength ReH values apply.
5) For all grades except S 550 GD, a range of 140 MPa can be expected for tensile strength.
6) If the yield strength is pronounced, the values for the lower yield strength ReL apply.