Documente Academic
Documente Profesional
Documente Cultură
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract:. Traffic sign recognition is important to seen and chances of violation of rules may happen. So
transport system on the high way or road. This paper considering the same its required to develop an intelligent
presents an overview the traffic sign detection and system which will give and Graphical Sign Boards on
recognition. we develop and implemented the
Dashboard Display and the Audio Indication for the same.
procedure to extract the road sign. The main objective
of this paper is to design and construct system which The system should use the vehicle battery supply and it
can automatically detect the road sign and display the has a built in RF receiver and the transmitter set at the
image on dash board of vehicle. This paper is based each of the board will transmit a unique code and
upon a major approach to detect road sign and extract accordingly the display will show the sign on the
it. This system will play an important role for the Dashboard followed by the audio indication.
detection purpose of specific domains like island,
schools, etc. Several time traffic police takes an action for violation of
the traffic rules . The violation may happen by mistake and
KeywordsTransmitter,Receiver Audio module
main cause is not clearly seen the traffic sign boards. Again
Graphic LCD and Microcontroller Web based application
testing, performance testing. Due to heavy traffic its becomes very difficult for the
vehicle drivers to observe each and every Sign. Again in
rainy season due to less vision transparency the sign
1. INTRODUCTION board may not seen properly. Again several times its
observed that due to weather Condition the images on
Now a days technology is playing a vital role in almost all board are not in good condition. So the problem
field, In automobile field also several advance systems are uncomforted feeling while driving to observe the various
developed. Due to the very busy life , while driving several traffic sign boards.
time we observe that we may not provide the attention on
the various signals on plate on the road side . For example 2. METHODOLOGY
School, Hospital, No Horn Zone, Speed limit 30 etc.
1. Studying literature on different road sign detection
The negligence to such boards on road may become
a reason for misshapes. So considering the same the need Methods and image processing.
of time is to develop a system that automatically receives
the traffic signal by the intelligent board and display on 2. Studying the existing method for road sign detection.
the dashboard and also automatically speed control of the
vehicle will be carried. 3. Analyze and design for the proposed system.
Brief Introduction of Project 4. Implement the proposed design of the road sign
detection.
While driving its important to follow the rules and
5. Carrying out experiment and evaluate the system.
regulations of the set by the RTO and as a part of the
driving guidelines several indicators and boards are set at
the various spots by Government . Each indicator has its
meaning. Indicator include speed breaker , Speed Limit, No
Horn Zone etc. Its drivers responsibility to watch the
board while driving an follow the same. Several time its
observed that due to heavy traffic etc the board are not
2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 741
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 04 Issue: 02 | Feb -2017 www.irjet.net p-ISSN: 2395-0072
2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 742
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 04 Issue: 02 | Feb -2017 www.irjet.net p-ISSN: 2395-0072
The components of hardware implementation are as [1] G. Eason, B. Noble, and I.N. Sneddon, On certain
integrals of Lipschitz-Hankel type involving products
follows: of Bessel functions, Phil. Trans. Roy. Soc. London, vol.
A247, pp. 529-551, April 1955.
5.4.1 Graphic LCD display
[2] J. Clerk Maxwell, A Treatise on Electricity and
It is easy to use work with graphic LCD display. It Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892,
pp.68-73.
works with most of microcontroller. It having +5V
power supply.
[3] K. Elissa, Title of paper if known, unpublished.
5.4.2 Power supply
[4] R. Nicole, Title of paper with only first word
capitalized, J. Name Stand. Abbrev., in press.
The microcontroller need +5V DC, These
specifications dictate the use of a low-cost, ubiquitous [5] Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, Electron
linear regulator National Semiconductor LM7805. The spectroscopy studies on magneto-optical media and
plastic substrate interface, IEEE Transl. J. Magn.
LM7805 requires an input voltage of at least 7.5V in order Japan, vol. 2, pp. 740-741, August 1987 [Digests 9th
to guarantee regulation, so the unregulated power supply Annual Conf. Magnetics Japan, p. 301, 1982].
should supply at least this voltage under worst-case
[6] M. Young, The Technical Writers Handbook. Mill
current consumption, assumed to be about 200mA. Valley, CA: University Science, 1989.
Because a full-wave rectifier will be used for efficiency
(diodes D1-D2), we can assume that about 1.4V will be lost BIOGRAPHIES
across the bridge (0.7V per conducting diode). We Authors
therefore need a transformer was selected as T1, which is
of rating 9-0-9 secondary at 500 mA Prof.K.M.Dange Pursued the
M.Tech in Electronics and
5.4.3 Microcontroller
currently working as Asst.
In this system, microcontroller is used. IC 8952 is used. professor in Annasaheb Dange
Collage of Engineering
5.4.4 RF Transmitter &Technology, Ashta. His area of
The frequency range is 433.92 MHZ for the specialization is Analog
transmitter. It operates on 3-12V supply voltage and
output power is 4-16dBm. Electronic, Video Engineering.
2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 743
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 04 Issue: 02 | Feb -2017 www.irjet.net p-ISSN: 2395-0072
2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 744