Documente Academic
Documente Profesional
Documente Cultură
ELECTRICAL TESTING - complete electrical testing of active and passive components and
assemblies using analog and digital test equipment.
ENVIRONMENTAL SIMULATION/RELIABILITY TESTING - tests performed that simulate
environmental conditions that a component will be exposed to (i.e., mechanical shock,
thermal shock, vibration, etc.).
DESTRUCTIVE PHYSICAL ANALYSIS - a systematic, logical, detailed examination of a
component, including examination of various states of physical disassembly, to identify
problems or discrepancies and their probable cause.
FAILURE ANALYSIS - a detailed examination of a failed device that usually consists of a
series of nondestructive and destructive tests to determine the failure mode.
MATERIALS ANALYSIS - a qualitative or quantitative analysis performed to determine the
material composition of a component by identifying chemical elements within the
component.
QUALIFICATION TESTING - Approved to conduct qualification testing to selected Military
Specifications.
PERFORMANCE TESTING - tests designed to evaluate the performance of a device.
NONDESTRUCTIVE TESTING - tests performed on a component that do not alter the
physical state or destroy the device.
Product Safety Compliance in Canada: The Standards Council of Canada has accredited
Intertek as a Testing Organization (TO) and a Certification Body (CB), allowing Intertek to
conduct product safety testing through our global network and issue your product
the ETL Listed mark with the "C" identifier.
Product Safety Compliance in the EU: For EU access your product must comply with the
Low Voltage Directive (LVD) - the EU's harmonized product safety standard. If your
product is designed to meet the requirements of the LVD, it's eligible for the "CE"
mark and access to the EU member countries. As a Notified body, Intertek can conduct
the required product safety testing, and prepare your LVD compliance documentation - a
prerequisite in the CE Marking process.
S Marking: Distinguish your products from those that are only CE marked by S marking
your product. By S marking your product you can sell your products throughout Europe
without further safety testing or certification.
GS Mark: Products bearing the GS mark indicates that it is tested and complied with the
minimum requirements of the German Device Safety Act (a.k.a., GSG). The GS mark is a
licensed mark of the German government, which may only be issued by an accredited
product safety testing and certification agency. Intertek is authorized to issue the GS
Mark.
Testing must offers fast, expert and efficient product testing, inspection and certification
solutions through our extensive global network of accredited laboratories. From
commercial food service equipment to household appliances, electronics, and
amusement and gaming machines, we have the quality testing solutions you need to be
successful.
Commercial Appliances
it is important to tests and certifies appliances for global compliance with gas/electrical
safety, sanitation, EMC, and energy efficiency standards including changing commercial
refrigeration regulations.
Household Appliances
it is important to verify the safety, quality and overall value of your indoor appliances,
helping to distinguish your product to retailers.
Consumer Electronics
to meet the increasing demand in this market, manufacturers require accuracy, speed
and efficiency.