Documente Academic
Documente Profesional
Documente Cultură
compostable
microwavable
harmless
e-mail buy@repaper.kr
fax 82-31-624-2623
phone 82-70-8844-6863
office #702. 9, Dongtanjungsimsangga 1-gill,
Hwaseong, Gyeonggi, 18455, Korea
re PAP ER
rePAPER
rePAPER
rePAPERs
#7~11
100% Recyclable RECYCLABLE
Nordic Pulp&Paper
R E S E A R C H J O U R N A L
RECYCLING
A new potential paper resource; recyclability of paper cups coated with water-soluble polyacrylate-based polymer
Academic Tai Ju Lee, Cheol Yoon and Jeong Yong Ryu
Activity
Abstract
Paper cups are typically made by laminating PE or PLA onto the surface of paper. PE and PLA are hydrophobic and easy for film formation. However, recycling of PE- or PLA-
coated paper cups is difficult. Polyacrylate (PA)-based polymers may be an alternative to PE and PLA, and recycling of polyacrylate-coated paper cups may be considered if
the barrier film can be disintegrated. The recyclability of paper cups coated with PE-, PLA-, and PA-based polymers was investigated by pilot pulper and screen. Furthermore,
mechanical treatments were investigated for the removal of remaining polyacrylate flakes (RPF). The pulping yield of PA-coated paper cups was higher than that of PE- or
PLA-coated paper cups, since PE or PLA films were discarded as hole screen rejects. In the case of PA-coated paper cups, RPF could not be separated by slot screening due
to its deformability. However, RPF must be treated properly since it can result in specks on the surface of paper. RPD could be fragmented effectively, with over 95%
rePAPER disappearing after one pass of kneading and 10 min of beating. Consequently, it may be possible to use PA-coated paper cups as a raw material in the paper recycling
process.
rePAPERs
Bio-degradation RETURNABLE
rePAPERs
Compostability 4th week 8th week
rePAPER
re
PAPER
Partnerships of rePAPER
NICE Holdings LECTA Paper Corea
Paper containers are widely used for their convenience and hygiene. However,
as the consumption of disposable paper containers has been blamed as the main
cause of global warming, it has burdened the users as if they neglected the
importance of the environment.
Does it have to be just a dream to have a kind of paper which can be recycled as
pulp again while meeting all the requirements as a food container such as water
proof, heat resistance, bio-degradability?
PE-coated products, which have been used until now for not having a proper
alternative in spite of unsafety issues as a disposable paper food container, and
PLA-coated products with high cost and unstability.
rePAPER Inc. now confidently suggest the optimized alternative.