Documente Academic
Documente Profesional
Documente Cultură
GIMHAE FACTORY
SALES CENTER
TEL: +82-51-970-1513, E-mail : panasia@worldpanasia.com
R&D CENTER
TEL: +82-51-970-1537, E-mail : lab@worldpanasia.com
DESIGN CENTER
TEL: +82-51-970-1526, E-mail : design21@worldpanasia.com
SERVICE CENTER
TEL: +82-51-970-1545, E-mail : service@worldpanasia.com
2000 ~ Present
Aug. 2009 Acquired NET (New Excellent Technology) Certificate
Jun. 2009 Renewed ISO 9001/2008 & Certified ISO 14001/2004
Feb. 2009 Constructed 2nd plant for Environment & Control division at Kimhae city.
Dec. 2008 Submitted an application for Final Approval of GloEn-Patrol Ballast Water Treatment Sys. to IMO MEPC 59 Session
Mar. 2008 Granted Basic Approval of GloEn-Patrol Ballast Water Treatment Sys. from IMO MEPC 57 session
Jan. 2007 Changed company name to PANASIA CO., Ltd
J u l . 2006 Contracted a high efficient DeNox System for IST project in New York
Jun. 2005 Collaborated the technical & marketing division with Endress+Hauser Korea Co., Ltd
Jun. 2004 UL certified for Level switch(PR-30 series) & Level transmitter(CPR-100)
Dec. 2003 Appointed as INNO-BIZ factory from the Government
J u n. 2003 Appointed as a promising exporting company from Export Assistance Center.
May. 2003 Achieved ISO 9001:2000 certificate(DNV).
Sep. 2002 Appointed as Clean Factory from Ministry of Labor.
A p r . 2001 Appointed as Superior Exporting firm from Export Assistance Center.
A p r . 2001 Awarded the prize from the Minister of Science and Technology.
Sep. 2000 Moved to New Factory in Nok-San Industrial Complex.
1989 ~ 1999
J u n. 1999 Opened R & D Laboratory.
J u n. 1998 Appointed as a promising venture company by Korea Electric Power Corp.
J u n. 1998 Achieved ISO 9001 certificate (DNV).
Mar. 1998 Registered Korea Electric Power Corp. as a supplier for Level Instruments for a nuclear power plant.
Nov. 1997 Awarded a prize for "A Proud Korean" by the president of Korea.
May. 1997 Appointed as a promising technical developing company from Government.
Mar. 1997 Awarded the prize of an excellent technical development from Government.
Mar. 1996 Registered as a sub-supplier of STX(Daedong) Shipbuilding Co.,Ltd.
A p r . 1993 Appointed as a localizing manufacturer for Level Instrument by the Korean Government.
Feb. 1993 Awarded the excellent development prize by Hyundai Heavy Ind.Co.,Ltd.
J u n. 1992 Concluded the technical & marketing collaboration agreement with IPH MARINE AUTOMATION A/S in DENMARK.
Mar. 1990 Registered as a sub-supplier of Hyundai Heavy Ind. Co., Ltd.
O c t. 1989 Established PAN-ASIA PRECISION & ENGINEERING Co.,Ltd. as a manufacturer of
Level Instrument in the field of marine industry.
COMPANY PERSPECTIVE
MARKETING TEAM DESIGN TEAM R & D TEAM SERVICE TEAM PRODUCTION TEAM
Generator Emitter
Timer Receiver
d
t d=c t
2
3 +
Levelflex M FMP40
~26GHz
Increased accuracy.
~ 6GHz
Less effected by turbulent
surface and foam
Less effected by condensate
and build-up
10 -
- Size of antenna / beam angle +
ToF Family-Commissioning
Multi-line plain text display.
Removable display for comfortable operation. Commissioning-easy,
Menu-guided operation in national language. fast and safe
Help for parameter setting.
System
Tank Top
Application
Crude oil
Product oil
Chemicals
Sea Water
Fresh Water
Installation of
Bottom Support Cargo Monitoring Console
General Operating Principle High & Overfill Alarm Switch Overfill Alarm Switch
The PANASIA high level alarm sensor consists of magnetic float and reed switch built in guide pipe.
When the magnetic float moves upward with rising level, the hermetically sealed magnetic reed switch inside
the pipe will be de-activated. Model : PR-30EX-2 Model : PR-30EX-1
This switch will be in an open-state position, which output alarms.
When the magnetic float moves down ward with falling level, the reed switch switch will be activated and will
be in a closed-state position (non alarm position).
This means a normally operated fail to safe loop.The 95% switch is normally for high alarm.
The 98% Switch is normally for high-high alarm(overfill alarm)
A test lever is provided for manually functional test to check integrity of high level alarm system before cargo
loading.
Operating Signal
Remark
Cargo Tank High & Overfill Alarm system is throughly designed according to Model:PR-30EX-
USCG latest requirements and are to be required by IBC Code Connection Diagram
Technical Specification
Detection units Reed switch with magnetic float
Detecting Accuracy 5mm
Switch Contact Rating 250VAC, 1A
Specific Gracity 0.6 above
Housing-SUS316
Flange-SUS304/SUS316
Material PR-30EX-
Guide pipe-SUS304/SUS316
Float-SUS316, Titanium Number of float
: 1 float
Anti-Ecplosion Structure Intrinsically safe type : 2 floats
Allowable Pressure 6kgf/
Air Horn
Installation-JIS 5K 100A FF/125A FF
Connection Size JIS 5K 125A FF(with chamber)
Conduit-JIS 5K 32A or JIS 5K 40A
Remark Applications
Cargo Tank High & Overfill alarm system is throughly designed according to USCG latest requirements High level alarm and Overflow alarm under IBC code, USCG & IMOs
and are to be required by IBC Code. latest requirement in any type tanks, esecially cargo tanks on chemical
/ product tanker, crude oil carrier.
Features
Maintenance Free Electrical connection Flexible Hose
Design of no moving part and simplified structure resulted strong enough and maintenance free product,
which is endurable sloshing wave or exces vibration in the tank.
For all kind of liquid
This equipment is sustainable to all kind of liquid in the tanks, such as crude oil, high viscous bunker oil,
petroleum products, chemical, etc. And no correction is required for the specific gravity.
Check apparatus before loading
Specially designed magnetic circuit is given for the operational check before loading cargo in the tank,
which is required by SOLAS and Federal Rule for Coast Guard. ELECTRICAL CONNECTION
Tank Pressure Monitoring
Built-in type pressure sensor could be provided additionally in the housing for oil/chemical tanker as option.
Operating Principle
Technical Specification Acoustic Type Level Switch
The sensor is based on the principle of distributed acoustic waves in a metal rod.
If the rod is not covered by liquid then the sound waves are dispersed freely without any interference. Model : PA-LW2
When liquid covers the rod then the emission of sound waves is muffled and his interference is picked up Top mounting < 3mm
Repeatabillty
by the sensor and transmitted to the alarm and control panel. Side mounting < 1mm
On the alarm and control panel are displayed warning indication lights for set level 95% and alarm 98%signal current loop with 16mA no alarm
when the set or alarm level is reached. The board contains relays which control the audio and visual alarms. Output
6mA alarm
I.S approval EEX ia IIC T6
Protection IP56
Piezo-electrical transducer Model : PA-LW2 18 to 30V DC
Power supply
Nominal 24V DC
Netural part
10
Sensitive part
Propagation of acoustic
waves in side the metallic rod
Introduction
The AMRI-SEIL / PANASIA VRC system is designed for position indication and electro-hydraulic remote Electric line
control of hydraulically actuated valves. The principle of the VRC system is that pressurized oil, generated hydraulic pressure line
by the power pack, is used to open or close the valve by means of the solenoid controlled actuator. Hydraulic returen line
Safety Area
The actuated valves are installed in Solenoid Valve Rack Interface Panel Automation System
safety area. (Ballast and Engine room etc) Solenoid valves are used to control the The interface panel consisting of relays, Remote operation by the computerized system
direction of oil flow to each actuators Power supplier, Converters and Barriers,
operated by an electric signal from control etc., is required to communicate between
console installed in safety area. valves and computerized control system.
Hazardous Area
The actuated valves are installed in Deck Box Hydraulic Power Pack Control console & Mimic panel
hazardous area. (In-tank and On-deck) The deck box controls the functions of The hydraulic power unit consists of oil tank, Remote operation of the conventional type by the control
each actuated valve installed in hazardous electric motor & hydraulic pump which generates console with mimic panel.
areas via explosion proof solenoid valves. the required system operating pressure.
Pressure switch
for alarm(option)
Draft Box
Operating principle
The operating principle is basically the same as the level
measuement of air purge type tank level monitoring system.
Monitoring Computer Electric indicator But Electric pneumatic type tank level gauging system has
electric reading and P/I Converter that converts pneumatic
input signal to 4-20 mA output signal in addition to air purge
type system.
Analog interface
Signal distributor Application
module
Ballast tank level measurement.
Draft measurement.
Engine room tank level measurement.
RS-485
(F.O, D.O, L.O, etc)
4-20mA
4-20mA
P/I converter
Constant The upgraded P/I converts is provided to converter an
flow regulator
pneumatic pressure into an electronic signal for remote
display of tank level and draft gauge on CRT and /or
Electric indicator.
Unlike the pneumatic indicator possible to be damaged by
excess-pressure, this P/I converter is free from inlet
excess-pressure without even Gauge saver.
Model : P940
Output current : 4 to 20mA DC,
2-wire system.
Protection against inlet excess-pressure.
Air purge head
Draft Box
Features
10 Tank interface without any additional components. (Air purge System)
-Built-in Air supply unit, Constant Flow Regulator Module (PA-1500)
-Sensor Module (PAMX-2000), 12 bit A/D converter.
Various kind of correction function.
-Specific Gravity, Trim & Heeling, Sensor position
-Volume converting according to the Volume table
Various display format of the tank information to the user
Industrial standard serial link and Ethernet link
-10Mbps LAN 1 channel
-RS232/485 1 channel each
Windows based Configuration program for easy setting & calibration
-Module/Ship/Tank/Channel setting
Specification
Type of system one-line air purge system
Air supply 6~10bar, set to 4bar
System accuracy 1% of Full scale
CPU Intel StrongARMTM SA1110-206MHz
OS Linux for embedded system
ROM 16MByte Flash ROM
RAM 64MByte SDRAM, PC100
Display 4 20 character VFD (Vacuum Fluorescent Display)
Input 10 air pressure from tanks
2 serials (built - in RS232/485)
1 LAN 10base - T
Output
Analog output (4~20mA, 1~5V)-Option
Dry contact - Option
Operating temperature -10~45 (under dry air condition)
Operating humidity 0~80RH
Dimension 450 350 240(mm)
Weight App. 20kg
Electric Power 85 ~ 250VAC, 50 ~ 60Hz
Features
High accuracy
Long term stability
4-20mA Output signal
EEx-version(EEx ia llC T6)
Easy installation
Easy maintenance
Application
Analog
The level transmitter can be used for measuring level Interface Module
contents in open such as WBT.
F.O TK. in E/R etc. Additionally the level transmitter is
available in Ex ia-version.
It is easy to install in all types of vessels because all of the
parts is in one.
The Electro-pneumatic transmitter has developed focused
on saving on installation cost with best reliability.
OUTPUT
Digital Monitoring
Function Indicator
4-20mA Computer
The principle of operation is based on the measurement of the hydrostatic pressure at the bottom of a tank
where air is injected continously through a sounding pipe.
A pressure corresponding to the level of the liquid will be built up in the sounding pipe.
This pressure will be measured by the transmitter and converted into a 4 to 20mA signal.
Technical data
Output 4-20mA, 2wire system Naval brass
Material
Load equation RL (Vcc-10)/22[ ] stainless steel
e.g.:24V supply RL<636 Air supply clean dry air 4~8bar
20mm from 0 to 10meter level Min. pressure 0.5bar above range
Accuracy
40mm from 10 to 35meter level Air consumption approx. 30 IN/ h
Air supply Internal tube Pipe length Reponse time Change in level
1.4bar 6mm 30m approx.10s 55mm/s
1.4bar 6mm 50m approx.20s 55mm/s
1.4bar 6mm 100m approx.50s 55mm/s
1.4bar 6mm 300m approx.4min 55mm/s
2.4bar 6mm 100m approx.5s 55mm/s
Application
Primarily for as an indirect continuous measurement
of level and cubic contents respectively of liquid in
containers and tanks.
Our 1:1 converter is espectaily suitable for hygienic
purposes within the food, beverage and chemical
industries as well as for potable water tanks.
Application
?'@@(?g
?V40Y?g
BALLAST TANK REMOTE READING
?'@@(?g
?V40Y?g
DRAFT REMOTE READING
?'@@(?g
?V40Y?g
HEELING AND TRIM REMOTE READING
?'@@(?g
?V40Y?g
FUEL OIL TANK REMOTE READING
?'@@(?g
?V40Y?g
WASTE WATER, WELLS, LOCKS, RIVERS ETC.
Feature
??
??
NO HYSTERESIS
??
??
??
?
'@(?g?
V+Y?g??
??
??
??
??
??
Technicall specifications
Parameter
0~0.25bar, 0~0.5bar, 0~1bar, 0~2bar, 0~4bar, 0~6bar, 0~25bar, -1~5bar Each span
Measuring Range
range is programmable in use calibration kit.
Transducer Type Piezo-Resistive Type Transducer
Non-Linearity 0.25% @ 20 4~20 mA DC loop Connection on junction box Outline / Dimension
Output
Long Term Stability Max 0.1% / year powered 2 wire
Transducer/Transmitter Material
.Yg?V/?e??
SUS316L / Titanium
??
??
Power Supply
Principle of Operation
Electrode type level switch is suitable for level detection in conductive liquid.
If the electrode comes into contact with the liquid, the A.C current will flow through the liquid and complete the
circuit. This AC current can be amplified and fed into electronic converter in sensor housing that detects
changes in its input current caused by rising medium. this change are converted into a corresponding current
change. If the changes exceeds an adjustable limit value, the output current rises discontinuously to > 3.4mA
The I.S.Barrier/signal converter in alarm panel uses this information to switch isolated contacts.
Feature
No moving part
Reliable
No damage by cargo
Easy to maintenance
Insensitive to cargo solids
PR-30EX HR-665261
(Float type) (Rod type)
General
The pressure monitoring system is designed for cargo tank & manifold pressure monitoring for any number of tanks.
The vapour pressure monitoring system is intended for pressure monitoring of waste return lines.
Computer Monitor
The PANASIA pressure transmitter is carefully designed to meet a harsh marine application for the tank pressure
monitoring system in accordance with SOLAS II-2/59 amended in 1996, and vapour pressure monitoring system required
under 46CFR part 39. 20-13 of VECS.
Electric horn with strobe light The transmitter is a high quality and accuracy semi-conductor type especially suitabe for the low pressure to be measured.
Operating Principle
RS-485 The transmitter measures the pressure by means of a semi-conductor sensor. Pressure changes in front of the diaphragm
will bring about a resistance change. The change in resistance is linearly proportional to the applied pressure and is
amplified by an integrated electronic amplifier to give an output signal. The electrical signals from the pressure transmitters
4-20mA on deck are connected to zener barriers in the monitoring cabinet equipped with pressure alarm lamp, buzzer and pressure
indicator in the cargo control room.
Pressure
monitoring panel
Technical Specification
SAFETY AREA
Analog interface
module
Power supply DC 10-30VDC
Accurcy 0.5% FS
Response time <1ms/10...90% FS
Measuring Range 0~25bar
Over load pressure Min.3xFS
Barrier Barrier Burst pressure 200bar
4-20mA
Output signal 4-20mA
Process Connection G1/2A(PF 1/2 )
Approval KEMA 03ATEX1127
Enclosure IP65(DIN 43650)
HAZARDOUS AREA
Technical Specification
Power supply 115/230 VAC (50-60 Hz)
Air supply 6-8 bar
Fuse 10 A
Oxygen Sensor 0-25% Volume
Alarm Points 1
Oxygen Gas & Vapour
Press Detection Cabinet
Set Point 0-100%
Explosion Proof EEx ia IIC T4
Pressure Transmitter 200mbar
Alarm Points 2
Main Components Set Point 0-100% Full Scale
Hydrocarbon Sensor 0-100% LEL n-Butane in air
Oxygen sensor Filter & Selection valve Vaccum pump Oil less carbon vane pump
Flow meter Annunciator Calibration Test gas from gas bottles
Pressure transmitter Digital indicators
Version Version
FUNCTION
1.OXYGEN CONTENT DISPLAY
2.HIGH OXYGEN CONTENT ALARM(8%)
3.VAPOR PRESS. MONITORNG
4.VAPOR PERSS.
HIGH ALARM(0.125bar)
LOW ALARM(0.01bar)
Indicators
LCD Display - High Alarm Lamp - Low Alarm Lamp - System Failure Lamp -
Main/Pre Flow Failure Lamp - Sensor Fault Lamp - Standby & Main Power Supply The system is designed to provide protection of the following areas : Cargo pump rooms; Cofferdams ; Pipe tunnels ; Ballast
tanks and double bottoms ;Void spaces ; Other empty areas adjacent to slop tanks.
Additionally, stool tanks and other empty areas adjacent to cargo tanks can be protected.
When locating fixed sampling points within ballast tanks, areas where an explosion is most likelyto occur must be assessed.
Specification The risk of explosion is mainly related to the release of cargo vapours through the ballast vents in the top of the tank, during
ballast filling. Hence it is considered sufficient that detection takes place in the upper part of the spaces whengas
Sensor No. Sensor No.1 Sensor No.2 Sensor No.3 concentrations reach detectable levels.
Main supply 220VAC 60Hz
We advise that ballast tank-sampling positions belocated at the top of the tank.
Emergency supply 220VAC 60Hz Sensor type Infra-Red Electrochemical Electrochemical
The sampling system extracts gas samples from a maximum of 48 lines and the default sample sequence is to cycle from
No of sample points Up to 48 Range 0~100% LEL 0~50ppm 0~25% VOL channel 1 to 48 and then back to channel 1 again. The time that thesystem samples on a channel can be altered for each
Sample time per line 60 Seconds Calibrated Gas Butane Hydrogen Sulphide Oxygen sample line to compensate for varyingsample line lengths.
Low alarm trip point & type 10%Rising 5ppm Rising 16% Falling Flame arrestors are constructed from stainless steel and designed to prevent the propagation of
Power shut down 30% LEL flames from the analyzing unit if a fire occur within the unit. Flame arrestors are provided as loose
High alarm trip point & type 30%Rising 10ppm Rising 24% Rising
items to avoid any damage to the unit during dispatch.
Operating Principle
Level switch monitors level in bilge well. With rising level, switch gives output signal to alarm panel and
then activates audible and visual alarms.
Computer Monitor RS-232
Application PATM-5000 series Module is designed for being integrated in a housing and fully compatible with RTD. thermocouple and
thermister etc,. This module can be supplied as complete or partial system with later additions.
Pump Room Bilge
E/R Bilge
PA-FLG-P100 Series
The PANASIA Flat type level gauge is designed according to JIS standard PA-FLG-P100
specifications. This type level gauge is used for marine oil tanks,excluding
those of flash point of 60 below. Flat type level gauge allow an excellent A-TYPE (AIR VENT) B-TYPE (TANK RETURN) C-TYPE (SELF-CLOSING)
observation of colorless liquid level through reflection of several parallel
grooved glass.
Gauge Body
Gauge glass
Installation
Operating principle
The principle of reflex glass is based on the difference in the refractive indices of liquid and gas or in particular
of water and steam.. The liquid column is contained within the recess of the centre-piece behind the gauge
glass which is clamped within the gauge body. If a ray of light encounters the surface of one of the 45
slanted grooves in the gas or steam space. It is reflected to the opposite surface of the groove and from there
totally reflected-back into the direction of observation.
The steam or gas space therefore appears as silver-white.
The gauge glass has prismatic right angled grooves, On the side facing the water and steam spaces. Light
rays entering from outside the gauge are either absorbed or reflected depending upon whether they enter the
water or steam space.
The light ray which encounters the surface of a groove in the liquid space is almost totally absorbed.
The liquid behind the reflex glass therefore appears back.
PA-RLG-P100 Series
The PANASIA reflex type level gauge consists of a sturdily constructed body, glass and cover securely fixed PA-RLG-P100
by u-bolts to endure high pressure.
This type level gauge feature serveral parallel grooves cut into the glass surface that is in contact with liquid. SELF-CLOSING
Thus the level of even transparent liquid can be clearly observed.
PA-RLG-P100 PA-TLG-P100
BALL CHECK
The level gauges shall be classified into three type A,B,C according to the shape of the upper body.
Please contact our factory if other specification are required.
Operating principle
The measuring pipe (chamber) is connected to the tank to form a float chamber that has the same level as
the tank. A float with a built-in magnetic floats freely on the surface of the liquid and transmits its movement
in the pipe, without physical contact, to an externally mounted indicating strip (Indicator).
The indication strip is placed on the ou side of the pipe and consists of numerous magnetic flaps which are
white on one side and red on the other, As the float passes the red/white flaps, the flaps are one after the
other turned 180 around their own axis.
The flaps change from white to red with rising level and from red to white with falling level.
The magnetic level gauge is particular advantage wherever dangerous and toxic media calling for careful
level monitoring.
Features
No harms to the environment. Safety Guarantee.
No leakage to atmosphere
No maintenance costs
Easy to read.
Suitable for pressure tank
Alarm contacts.(option)
Analogue output signal, 4-20mA.(option)
Application
Generally applied to fresh water, Lub oil, Diesel oil, Heavy Model:PCG-150 Series
fuel oil and solvent gasoil and noncorrosive liquid.
Specifiation
Gauge size Dial 150, 100, 160
Mounting type Side, submersible mounting
scale of indication Height(m) & volume( )
Accuracy 1.5% of full scale
Operating temperature
range -20 to +100
Operating principle
The diaphragm is affected by the hydrostatic head medium column in tank, which apply pressure to the oil
filled capillary.
The pressure applied to capillary expands bourdon tube of indicator, so that the indicator displays the level
corresponding to actual tank level.
Description of model
?? ??
?@@@@@@@@@@@@@@@@@@@@@?? ?@@@@@@@@@@@@@@@@@@@@@??
PCG -
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
Size of Indicator
MS : 100 dial gauge
MT : 150 dial gauge
Note
Dimension H must be complied with because the
indicator is sensitive to its mounting position.
Application
Generally applied to Water tank and L.O, D.O and Model : PDG-150 Series
H.F.O.tanks.
Besides, magnetic coupling type dial float level gauge
is applicable to the liquids that emits corrosive,
inflammable or poisonous gases.
CASE-2 CASE-3
Operating principle
PANASIA magnetic float level switchs monitor and control liquid levels in open or closed tank. PM-12H PM-12H-T
A permanent magnet is part of a float which rises or falls with the changing liquid level.
This magnet repells another magnet located opposite in the switch housing. In this way it causes a snap action
contact effect. A switch unit provides on-off contacts.
Application
Fresh water tank, Heavy fuel oil tank. switch unit
D.O.tank, Sludge tank, Sewage tank, etc.
Technical data
?? ??
? ?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
PM- 12 -
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
electrical microswitch,
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
?@@@@@@@@@@@@@@@@@@@@@?? ?@@@@@@@@@@@@@@@@@@@@@??
Contact
change contact, SPDT, DPDT
Option
Switch rating 250V AC, 3A T : Test Device PM-12H-D PM-12H-C
Liquid density min. 0.7kg/d C : Cranked
E : Explosion Proof
20mm height at 0.9kg/d S : Submersible
Switch hysteresis
specific weight D : Differential
Ambient temperature -30 to +70
H : Horizontal mounting
Medium temperature -25 to +135 V : vertical Mounting
3kg/ (standard),
Rated Pressure
up to 12kg/ (option)
Installation horizontal
Protection of Switch housing IP 56, IP 68(option)
Float material sus 316L A(ROD LENGTh) : MAX.500MM
Flange, housing SUS 304, ALDC 8 B(DIFFERENTIAL) : MAX.300MM
Operating principle
PANASIA magnetic float level switchs monitor and control liquid PM-12V PM-12V-T
levels in open or closed tank. A permanent magnet is part of a float
which rises or falls with the changing liquid level.
This magnet repells another magnet located opposite in the switch
housing. In this way it causes a snap action contact effect.
A switch unit provides on-off contacts.
Features
Easy maintenance
Safed operating conditions
Reliable
Housing
PM- 12 -
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
?@@? @@? ?@@? @@?
Option
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
? ?
T : Test Device
C : Cranked
E : Explosion Proof Float
S : Submersible
D : Differential
H : Horizontal mounting
V : vertical Mounting
Operating principle
Operation is based upon a buoyancy principle whereby a spring is loaded with weighted displacers which are PM - 90-1 PM - 90-2
heavier than the liquid.
Immersion of the displacers in the liquid results in a buoyancy force change, which moves the spring upward. (VIEW A)
Since the spring moves only when the level moves on a displacer, Spring movement is always a small (VIEW A)
fraction of the level travel between displacers. A magnetic sleeve is connected to the spring and operates
within a non-magnetic barrier tube. Spring movement causes the magnetic sleeve to attract a pivoted
magnet, actuating a switch located outside the barrier tube.
Switch set points are achieved by moving displacer modules up or down the displacer wire/rod.
(OPERATING SIGNAL)
?? ??
? ?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
PM - 90 -
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
?@@@@@@@@@@@@@@@@@@@@@?? ?@@@@@@@@@@@@@@@@@@@@@??
1 : Displacer
2 : Displacer
3 : Displacer
(OPERATING SIGNAL)
(VIEW A)
Specification
Max. Max. Setting Mounting Min. Switch Material
Model Application Press. Temp. accuracy flange Sp.Gr. Connection Cable contact
gland
( / ) ( ) ( ) (standard) rating Housing Flange Displacer Chamber
High or 250V SS400 SUS304 SS400
PM - 90 T-1 Low alarm Top 15/ 20 AC
10 180 10 0.85 AC, or 78, or
flage a,b,c IP56
or control JIS 5A SUS304 200L SUS304 MODES PM-90-1 PM-90-2 PM-90-3
High or 5K 80A 250V SS400 SUS304 SS400 Upper :30 to 50 Upper :30 to 50 Upper :30 to 50
Top 15/ 20 AC DIFFERENTIAL
PM - 90 T-2 Low alarm 10 180 10 5K 100A 0.85 flage a,b,c AC,
IP56
or 78, or
(mm) 1
or control 5AX2 SUS304 200L SUS304 Lower :30 to 50 Lower :30 to 50 Lower:200 to 4500
10K 80A
NO
High alarm 10K 100A Top 15/ 20 250V SS400 SUS304 SS400
PM - 90 T-3 10 180 10 0.85 AC, AC or
COM
/Mid. flage a,b,c 78, or NO
NC
5AX2 IP56 SUS304 200L SUS304 COM
low control NO NO1
CONTACT COM
NC
COM1
Optional informations CONFIGURATION NC
NO1 NC1
COM1
1.Special material(SUS316, SUS304) for weted parts including mounting flange, chamber is also available on NC1
NO2
request. COM2 1:Differential is the allowable range from the
NC2
2.Switch contact type : SPDT, DPDT acutating level of the switch to the reset level
Operating principle
The reed switch type float level switches consist of a
magnetic float and reed switch as main components.
PR-30S-2 PR-30S-2 (with chamber)
A float equipped with permanent magnet moves up and
down with the fluid level between two stoppers and its
magnetic field actuates a hermetically sealed reed switch
incorporated in guide pipe.
The switches can be normally open, normally closed or (OPERATING SIGNAL)
change-over contacts.
The advantage of this principle;there is only one moving part,
the float.
This actuates the reed switch with its magnetic field without
causing any wear.
The reed switch is itself totally isolated from the media.
These advantages give the user safe, repeatable, accurate
and high operational reliability with low maintenance over a
long and trouble free life.
Description of Model
?? ?? ?? ??
? ? ? ?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
C C
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@? @@? ?@@? @@? ?@@? @@? ?@@? @@?
?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@? ?@@@@@@@@@@@@@@@@@@@@@?
?@@@@@@@@@@@@@@@@@@@@@?? ?@@@@@@@@@@@@@@@@@@@@@?? ?@@@@@@@@@@@@@@@@@@@@@?? ?@@@@@@@@@@@@@@@@@@@@@??
N : No housing N : No housing
S : Submergible type S : Submergible type
CONTACT TYPE : SPDT
I : Interface Detector I : Interface Detector
All switches have three electric connections(black, blue,red)
Q Ty of float Q Ty of float The black wire is the common pole for both switching
1 : 1 Float 1 : 1 Float functions (black contact and make contact)
2 : 2 Float 2 : 2 Float CONTACT TYPE : DPDT
3 : 3 Float 3 : 3 Float This switch has two(2) SPDTcontact which is same as above.
Recommended Protection
D.C.
A 1N4004 diode(or equivalent) connected cathode-to-positive, as shown in Figure 1, is recommended.
The diode does not conduct when the load is energized, but conduts and shorts out the generated voltage when the switch
opens. The generated voltage always acts in series with the applied voltage.
A.C.
A resistor and capacitor, connected in parallel with the switch, as shown in Figure 2, is recommended. The capacitor is a
hight impedance to 60hertz, but is essentially a short circuit high prequencies of generated voltages.
Transient suppressors or varistors may also be used to dissipate the transient and protect the switch contacts. For
130VAC rated devices, the following table may be used for selection.
Dimension Dimension
VALVE REMOTE
CONTROL SYSTEM
>>
Limmasol, Cyprus Singapore
LEVEL GAUGE Vladivostok, Russia Jakarta, Indonesia
-Self power content gauge Kaohsiung, Taiwan
-Flat type glass level gauge
Cochin, India
-Magnetic float type level gauge
LEVEL SWITCHES
-PM-12 Series
-PM-90 Series
http://www.worldpanasia.com
-PR-30 Series