Documente Academic
Documente Profesional
Documente Cultură
Astable Multivibrator
Aim: To Design a Asatble Multivibrator using a IC555 Timer to generate a square wave of
desired frequency and duty cycle.
Components required:
Theory:
Circuit Diagram:
Circuit Design:
Assume f = 2 kHz and duty cycle of 70 %.
Consider C = 0.1 F.
Duty Cycle
Waveforms:
Procedure:
Circuit is rigged up as shown in figure 1.
Output voltage waveform is observed at pin 3 of the IC 555 and are traced.
Capacitor voltage waveform is observed at pin 2 or 6 and are traced.
Ton , Toff and T of the output waveform at pin3 are measured and verified.
Result:
Astable multivibrator has been designed and tested.
Monostable Multivibrator
Aim: To Design a Monostable Multivibrator using a IC555 Timer to generate a square wave of
desired pulse width.
Components Required:
Theory:
Circuit Diagram:
Circuit Design:
Given pulse width W = 4 msec
Choose C=0.01F
Waveforms:
Result: