Documente Academic
Documente Profesional
Documente Cultură
Components required:
Theory:
Circuit Diagram:
Circuit Design:
Assume R = 1k then 2R = 2k
Example:
Case 1: D3 D2 D1 D0 = 0 0 0 1
Graph:
Tabular Column:
Procedure:
1. Connections are made as shown in the circuit diagram.
2. The input D0, D1, D2, D3 are connected to the input toggle switches.
3. Given the binary form (0000 to 1111) and measure the output of op amp using digital
multimeters and verify the obtained value with the theoretical value.
4. Plot the graph of binary input versus the output voltage of an op-amp.
Result: Designing and testing of R-2R DAC using op-amp is verified. The theoretical and
practical values are verified.
Theory:
Circuit Diagram:
Graph:
Tabular Column:
Procedure:
5. Connections are made as shown in the circuit diagram.
6. The input D0, D1, D2, D3 are connected to the IC7493 as shown in the circuit.
7. Given the binary form (0000 to 1111) and measure the output of op amp using digital
multimeters.
8. Plot the graph of binary input versus the output voltage of an op-amp.
Result:
Design of 4 bit R 2R Op-Amp Digital to Analog Converter by generating digital
inputs using mod-16 counter is verified.