Documente Academic
Documente Profesional
Documente Cultură
PlastiDrain
PlastiDrain is a plastic gravity drainage system
designed for both foul and surface water
applications in housing, industrial, commercial
and highway drainage.
PlastiDrain is based on 110mm and 160mm
diameter pipes and includes a comprehensive
range of fittings, gullies and inspection
chambers together with a wide range of adaptors for connection to a variety of
other pipe systems.
Product Selector
PlastiDrain Fittings Description Dia mm Code Fittings Description Dia mm Code
Reduced Access Telescopic PPIC Round GRP Cover & Frame Rectangular End Hinged
Improves safety by preventing man entry Green GA2-450 400x400 IDG7
whilst still allowing inspection and Includes security clips for SPK11 Ductile Grade D-400
maintenance access to drains and sewers. additional safety - EN124 GA2-325 360x310 IDG8
Depth range 1.2 - 3.0m Ductile Grade C-250
A choice of DN100 or DN150mm diameter Recessed Cover for
inspection chambers with combinations of optional surface cover SPCR8 GA2-325 500x350 IDG9
700mm or 175mm risers, together with Ductile Grade D-400
sealing rings, plus a new adjustable cover and Yard Gullies Description Dia mm Code
frame with 350mm Vertical and 4 angular Lifting Keys
adjustment. Heavy Duty (per pair) ILK1
Yard Gully
Universal - connects to DN100/150mm Available with either Light Duty (per pair) ILK2
SuperSleve and PlastiDrain systems domestic or medium
grating. 110 4A30A Accessories Description Dia mm Code
Telescopic Raising Piece Internal Internal Back
Assembly SPIC3/7 dia depth dia
Airtight, Class B square cover Solvent Cement - 250ml Can S241
with 350mm vertical and 4 225mm 585mm 110mm
angular adjustment, c/w Solvent Cleaning Fluid - S243
installation instructions. Domestic Duty Grating 250ml Can
Access not greater than (up to 1 Tonne) 4A31A
350mm dia Medium Duty Grating Lubricant Bottle - 500ml S264
Raising Piece SPIC3/4 (up to 5 Tonnes) 4A32A
700mm deep, pre-sealed Lubricant Tub - 1 kilo SL1P
Raising Piece SPIC4 Combined Filter and - 2.5 kilo SL2P
175mm deep Silt Bucket 4A33A
Expanding Pipe Stopper
Sealing Ring for SPIC5 For Pipe Testing 110 4P30A
Raising Piece 160 6P30A
100/110mm 100/110 SPIC1/1 Yard Gully Raising
Polypropylene Piece 4A34A Universal Grease Trap
Inspection Chamber (300mm high) 550mm deep 100/110 RGU1
940mm deep, 475mm Supplied complete including filter
diameter, 5 inlets basket, spatula, cover and frame
150/160mm 150/160 SPIC1/2 Road Gullies Description Dia mm Code and 100/110 conversion adaptors
Polypropylene Internal length Internal width
Inspection Chamber HDP Polyethylene Gully,
untrapped 150mm 600mm 450mm
940mm deep, 475mm
diameter, 5 inlets SuperSleve outlet
Internal dia x Internal depth Spare Cover and Frame IGUCI
Raising Piece SPIC4 375x750mm 150 GO3A
175mm deep 510x840mm 150 GO4A
Description
Use 6A18A to adapt to PlastiDrain Spare Filter Basket RGUFB
and Spatula
Sealing Ring for SPIC5
Raising Piece HDP Polyethylene Gully,
trapped 150mm SuperSleve
Base, 225mm deep 110/100 SPIC6/1 outlet
five 100/110mm inlets. Internal dia x Internal depth
110mm adaptors included 375x750mm 150 GO6A
510x840mm 150 GO7A
Mixed Base, 100/110 & SPIC6/2 Use 6A18A to adapt to PlastiDrain
315mm deep 160/150
150/160mm straight through main Manhole Covers Description Dia mm Code
channel with 2x150/160 branches
at 90 and 2x100/110 branches at Double Triangular
45. Clear
Supplied with 4 inlet stoppers Ductile opening
Grade D-400 600x600 IDC1
Universal
Inspection Chambers Description Dia mm Code
Double Triangular
Inlet Adaptor Cast Iron
150-100mm 150/100 SPIC7 Grade D-400 600X600 IDC2
Inlet Adaptor from
160-110mm 160/110 6P22A Rectangular (Slide Out)
Ductile
Round Ductile Iron Grade B-125 600x450 IDC4
Cover & Frame (airtight) Grade B-125 600x600 IDC6
Includes security clips for SPK8
additional safety - EN124
Rectangular Clear
Square Ductile Iron Cast Iron opening
Cover & Frame SPKS8 Grade A-15 600X600 IDC7
Includes security clips for
additional safety - EN124 Double Triangular
Round GRP Cover & Frame Ductile 405x435 IDG1
Black Grade GA1-450
Includes security clips for SPK10
additional safety - EN124
Product Data
Square PPIC Cover
SPKS8
205mm
205mm
220mm
300mm
250mm
165mm
205mm
Inlet Gully
Product Features Benefits
Flexible outlet for 5 to 20 adjustment from the horizontal Ease of connection to difficult angles
Removable dip tube trap Improved maintenance by allowing gully to be cleaned more easily. Access to outlet for full bore rodding
Brush strip vertical back inlet Maximum flexibility of inlet configurations
Multi-material construction Optimum strength for a positive location, utilises versatility of modern materials
Square top Neat fit to walls and paving materials
20% increased capacity Unrestricted flow
Offset cover Easy location to slab foundation or against building. Easy access to back inlet
Compact design Reduced excavation and easy accommodation of shallow foundation to ground height
Stabilising feet Increased stability during installation
Ability to accept raising pieces Maximum flexibility of height, using 4A17E 300mm raising piece
Good aesthetics End user satisfaction
360 rotation of top to base Ensures perfect fit every time. Outlet can be adjusted to take best design line
Hinged Screw Down captive grid Enhanced safety and security
Hinged cover plate option Increased design flexibility where grids are not suitable
151mm
211mm
271mm
248mm
45
164mm
164mm
Rodding Point
Product Features Benefits
Square top Enables best fit to surface paving or buildings
Hinged, sealed, screw down top Secure, easy to maintain, suitable for all applications
Durable material Excellent impact resistance
Strength - one tonne wheel load Can be safely used in driveways
Product Data continued
Flexible Bend
4F05A
140mm
25
Mini Chamber
SDAC1/1
600mm
405mm
405mm
Mini Chamber
Product Features Benefits
Flexible inlet arms from 0 to 10 Ease of connection in difficult conditions
Square cover Neat fit to paving and other surface materials
Purpose made raising pieces with integral seals Quick and simple height adjustment with no loss of system water and air tightness
Only one base with two 45 inlets Ordering simplified with ultimate in flexibility - one base does everything
Non level invert. Inlet arms are raised above main channel Flow greatly improved
Increased flow characteristics by computer aided design Maximum efficiency and low maintenance
Shallow base unit designed for direct fit to cover Accommodation of pipes laid at shallow depths
Advanced polymer cover Reduced maintenance and long life
Application Details
Inlet Gully with External Vertical Waste Connection Inlet Gully with Internal Vertical Waste Connection
Waste
pipe
Waste pipe
275mm
Hinged 275mm
55mm
Captive
55mm
Grid Hinged
Captive Adaptor
Hopper Grid for waste
pipes
205mm
300mm
205mm
Hopper
205mm
300mm
205mm
90 bend
Removable trap 4P03A
275mm
168 mm
Hopper
505mm
325mm
Paved Area Gully Chosen Square Gully with Rotating Top (4A12A)
;;
;;;
;;; ;;;;;
surface finish
168mm
Waste or Rainwater pipe up to maximum
70mm 68mm diameter or 65mm square pipe
Polypropylene grid (provided) secured at
corners by four Push-fit plugs
325mm
Rotatable top
4A22A
Set in concrete
Concrete bed
Removable stopper allowing
Rodding access
Depth adjustable
Standard raising
piece 150mm
Bend
;;;;;
25
Use of flexible bend with
;;;;;
a 45 junction gives a pipe
25 to pipe variable angle of
Concrete 15 - 70
45 Bend
4P04A
Designer to
specify
Flexible bend
4F05A
45
PlastiDrain Pipe
or Bend Oblique junction 45
Triple socket 4P09C
System Performance
Materials: Quality Assurance:
Pipes and fittings are manufactured from Unplasticized polyvinyl chloride All Hepworth products are manufactured under a
(PVC-U); Gullies from PVC-U, polypropylene (PP), or polyethylene (PE); quality management system which is approved to BS
Inspection chambers from polypropylene. Couplings can be made from either EN ISO 9001:2000 Quality Management Systems -
PVC-U or PP and contain a rubber sealing ring manufactured from styrene Requirements.
butadiene rubber (SBR).
Maintenance:
Colour: A PlastiDrain system when correctly designed and installed should not need
Pipes, Gullies and fittings are in terracotta. Inspection Chambers and maintenance. However, blockages do occur from time to time and the pipeline
elastomeric joint rings in black. will need to be cleared. Provision of access points into the system should be
made in the design of the drainage layout. Should a blockage occur, flexible or
Standards: roller type rods should be used.
The PlastiDrain system is manufactured to the highest possible standards and
where relevant is manufactured in accordance with BS 4660: 2000 and From July 1998 the new Europe-wide manufacturing standard BS EN 1401-
BS EN 1401-1: 1998 which specifies the requirements for underground pipes 1:1998 started to replace BS 4660. However, 110mm and 160mm
and fittings in sizes 110mm and160mm. Rubber seals are manufactured to access fittings are not covered by the new standard and will conform to
BS EN 681: 1996. BS 4660:2000.
In addition the PlastiDrain system has been independently assessed by the
British Board of Agrment and has been awarded an Agrment Certificate
No 86/1648.
Pipes laid at depths greater than 900mm cover in roads, 600mm in fields. Pipes laid at depths less than
Pipes laid in as dug subsoil Pipes laid in subsoil Pipes laid in subsoil 900mm cover in roads, 600mm
suitable as bedding material* unsuitable as bedding unsuitable as bedding in fields.
material which does not material.
puddle when walked on.
Backfill Concrete
Material Slab
300mm 300mm
As dug backfill/sidefill maximum particle size 10mm (110 dia) 300mm backfill free from stones greater than 40mm (unless granular
14mm (160 dia) material extends 100mm above pipe see above)
10mm single-sized aggregate (complying with BS 882) As dug backfill
NB Where backfill above pipe contains stones greater than 40mm or Granular material in accordance with BS 5955 Part 6 1980: table 2
cover to pipe exceeds 2m in poor ground extend the bedding material Pipe dia Material (complying with BS 882)
to 100mm above the pipe crown. (mm) (mm)
* Suitable material - granular material in accordance with BS 5955 Part 6: 1980 110 10, single-sized
Appendix A maximum particle size - 10mm (110 dia), 14mm (160 dia). 160 10, 14 single-sized, 14-5 graded
Sitework and Installation Instructions
It is important that good care is taken on site to prevent unnecessary Stack socketed pipes as diagram b. Ensure that the first layer is raised off
wastage of materials and time and for the prevention of problems the ground.
after laying thus causing delay and additional expense. Fittings supplied in bags should be stored away from direct sunlight.
Advisory Services
Technical Advisory Service Literature
This service covers all aspects of For details of other products in the
Hepworth products from design through Hepworth range, please telephone the
to maintenance. Literature Service Hotline on:
Hydraulic and structural design Tel: 0870 443 6000
Quantity take offs and material Fax: 0870 443 8000 HAZLEHEAD CROW EDGE SHEFFIELD S36 4HG
TELEPHONE 01226 763561 FACSIMILE 01226 764827
scheduling
Availability Our policy is one of constant development. Whilst
For any advice or assistance on these this publication is accurate at the date of printing,
The Hepworth range is available through specification/approvals may be changed in the
matters contact the Technical Advisory interest of continued improvements.
a nationwide network of builders
Service on: Hepworth Building Products
merchants or direct from Hepworth. For
Tel: 0870 443 5551 further details please telephone our order
enquiry hotlines on: e-mail: drainage@hepworth.co.uk
Fax: 0870 443 5552 web site: www.hepworth.co.uk
Tel: 0870 443 6000
Email For Customer Service
Fax: 0870 443 8000
customerservices@hepworth.co.uk
PD/11/06/2399