Documente Academic
Documente Profesional
Documente Cultură
Version 26/12/02
Sikagard -700 WT
Siloxane impregnation for concrete and masonry substrates
Description Sikagard -700 WT is a 1-pack solvent free aqueous emulsion of a
modified polymethyl siloxane. It is developed for the water-repellent
impregnation of facades. This product is effective on both alkaline and
neutral substrate.
Pack sizes 20 and 5 litres. For fair-faced concrete the application of a test area is strongly recommend
(observe moisture level near substrate down to a depth of approx.
Shelf life In original closed containers in cool and dry environment : 2 cm < 5% pbw).
approx. 6 months. Sikagard -700 WT is not sensitive to frost.
If there are joints to be filled on concrete surfaces which have been
impregnated with Sikagard -700 WT, e.g. precast concrete elements,
Product data
adhesion to these pretreated surfaces will not be impaired. Naturally, the
Coating system 2x Sikagard -700 WT wet on wet. primers corresponding with respective products must always be used.
Material consumption Approx. 0,2 kg/m2 per application for substrates with normal absorbency. Mixing Sikagard -700 WT can be diluted with water at the ratio of
Material consumption and the number of applications depend entirely on the Sikagard -700 WT : water of 1:4 to 9
surface condition and porosity; in case of doubt a test should be carried out
in ourder to find the exact material consumption and number of applications Application methods Apply liberally by brush or spray
required.
Waiting times between coats Sikagard -700 WT is applied wet on wet
Technical data Specific gravity approx. 1.0 kg./ltr.
Application tools Brush, roller, low pressures spray gun
Resistance Chemical:
de-icing sals, alkali Cleaning of implements Water
Hints on application Areas such as window frams, which are to receive a protective coating, must Precautionary measures - classification and lebelling according to regulations for transport and for
be masked prior to application of Sikagard -700 WT. dangerous substances
Area not to be impregnated, such as window panes, etc. which are in danger of - protective measures for storage and handling
- measures in case of accidents and fire
being contamianted with Sikagard -700 WT should also be carefully masked
prior to application, as the material cannot be removed afterwards from glass. - toxicity and ecological effects
Important : When applying Sikagard -700 WT care must be taken where
there are fitted cable lines, plastic control panels or similar. Whereas PVC
is resistant to Sikagard -700 WT, polystyrene elements and other plastic
parts may get damaged.
Condition of substrate Free of dust, soot and dirt, lime efflorescence, salt and paint remnants
etc.must be removed, if necessary with suitable detergents or by light
sand blasting or steam cleaning.