1-1, RV series turbo reducer can be Instructions multi-directional installation, installation method: Varity Worm Gear Reducer Passed ISO9001:2000 Specifi RV Series RV Series International Certification cation 025-090 110-130
The Actual installation
direction position should be
Install of the determined at the time of ation installation installation orders for the Way can be same position, and to
random. make fuelairscrew up.
RV OPERATING INSTRUCTIONS 1-2, When RV series worm reducers installed In order to ensure the correct installation, use output shaft coupling, pulley, sprocket, such as and maintenance of the worm gear reducer, connectors the hand-hammer blow is strictly prohibited and shall ensure the appropriate gap Worm Gear Reducer between the bottom of keyway and the top of the Varity plat key. RV Series RV Series Specification 1-3, when our products are leaving factory, all 025-090 110-130 combined by the adhesive surface are sealed The top level of oil plug leak-proof handing, the user should ensure that Completely-clo removed and replaced after dismantling the performance of well-sealed sed structure, Fixing immediately with a to avoid leakage. without Way portable refueling Second, usage refueling plug equipment (air) plug, and 2-1, RV series worm gear reducer, the factory release releases the air. has added adequate lubrication before leaving 2-3, RV worm gear reducers working factory, so it can be used without refueling. environment temperature is-20-40, the load 2-2. when our products leave factory, in order to temperature rise and the maximum temperature prevent the transport of oil, has been filling (air) of the body surface should meet the following plug screw tightened up and closed, use the requirements: following requirement shall be adjusted, air permeability: Load The maximum Varity temperature rise temperature if the body RV series RV series surface Specificatio 025-090 110-130 Worm gear n 60 96 reducer Shell TIVELA 2-4, RV series worm gear reducers operation OILSC320; (GB5903-1995) No.320 Lubricants can be both positive and negative, also to start Mobil middle-load Trademark the load. GLYGO-YLE industrial-closed gear oil Third, maintenance 30 3-1, RV series worm reducer should always Completely After using 1000 hours, to maintain a clean surface to facilitate heat Lubricants closed replace the new oil, later dissipation, if the excessive temperature is found, structure, no please add and change oil then we should be timely to check fuel and oil Replacemen need to at regular time, to ensure quality. t replace that the oil level in oil 3-2, RV series worm gear reducer lubrication oil lubrication. over subscript center. quality and lubricating oil replacement should RV-25-090 worm reducer, if needs to add the meet the following requirement: lubrication, rigorous middle grades with other Variety Worm gear reducer lubricants, and the reducer in order to avoid the original lubricants react, leading to deterioration 4-1, all in accordance with the Instruction and lubricant have series consequences. provides installation use, combination, without 3-3, Reducer seal due to aging, wear and tear to disassembly, indeed the quality of our cause the oil leaking and seeping, oil spills non-performing manufacturing fault or damage should be promptly replaced, is strictly cased, since the date of leaving the factory, prohibited shortage of oil operation of oil-free. within one year of the three guarantees. For 3-3, Rubber seal due to aging, wear and tear failure caused by improper use of damage, it is cause the oil leaking and seeping, oil spills not within three guarantees scope. should be promptly replaced, is strictly 4-2, all identified as three guarantees for prohibited shortage of oil or operation of oil maintenance, plant maintenance is responsible free. for free, Non-three guarantees cases, users 3-4, the use of such an exception occurs within a have difficulty for self-repairing can be collective, should be stopped to check. Knock transported to our factor for check, and for should be avoided for maintenance and inspection fees, as appropriate. disassembly. In order for avoiding damage. Four, the quality of Three Guarantees Passed ISO9000:2000 international quality management system certification
Certificate of Quality Model:
Type:
No:
Date:
Inspector:
This product passes the checkout is qualified and approval to release