Documente Academic
Documente Profesional
Documente Cultură
\!
Professional, amateur or recreational night time sports
activities, security perimeters, loading ramps and park-
ing facilities are just a few of many applications for
Power Mate Floodlights. Efficient, sealed, completely
weatherproof optical systems produce narrow, medium
and wide beam patterns for maximum application flexi-
biiity. A unique, unitized, self contalned ballast assembly
with quick-twist mounting feature simpl ifies installation
and maintenance. A wide variety of mounting acces-
sories add to the versatility of Power Mate Floodlights.
lnierlace and
gaskelinq of
(i) Single piece spun aluminum reJlector Die cast aluminum optical supportwith
- finished with Alzak* process. quick-twist feature to attach cast ballast
housing to optical assembly.
(i) Optional heavy gauge spun aluminum
- protective shroLrd. Heavy gauge ptated mounting trunnion.
@
@ Tempered heat and impact resistant flat @ Removable a im ing sight.
glass lens.
@:""Jfffl'[:',r;T."".l""'?ixt":"fj?;j#"
@stainresssteerrensrrame,
, d
Fter mainlenalce.
(5, Stainless steel lens lrame hrnge.
slarnless.sleer poslllve lalcnlng sprlng 6)
\-/ Modular oie casta,um,nJm ballastassem-
!ry
- clamps (4)
bly-conlains all e.ectr'cal corlponenls
and an isolated weatherproof wiring com
G) provides
Cable strain relief bushing partment. lncludes prepositioned lamp
" entranci
watenight cable socket fo r maximum optica I efficiencY
@ Lamp stabilizer
*Proprieraryterm ofAlcoa- uL Listed suitable for wet location.
-
POWERMATE"
FLOODLIGHT
ORDERING INFORMATION
W|DE BEAM MEDIUM BEAM NARROW BEAM NET. WT,
LAMP cAt No. CAT. NO. cAr No. LSS.
400 Watts
N/etal Halide MS3162 S t\,1s3163 S MS3164 S 38
High Pressure Sodium t\4s3262 S t\,1s3263 S M53264 S 45
1000Watts
lMercu ry MS3O82 S t\,1s3083 S M53084 S 44
N/letalHalide M53182 S t\,1s3183 S MS3184 S 45
High Pressure Sodium MS32B2 S MS3283 S 53
1500Watts
MetalHalide t\,1s3192 S MS3193 S tvts3194 s 56
-at
$F'ge!FtcATtCINs
This specification covers Mccraw-Edison Power finlshed with Alzak* process, a hinged lens ring and
N4ate Floodlights for use with 400, 1000 and 1500 clear, flat, tempered glass lens. The lens ring shall
watt high intensity discharge lamps. be held in place by four (4) stainless steel spring
Fioodlight - sha ll be catalog number (specify) and clamps.
xProprietary term of Alcoa.
shall include the following features.
Eallast housing-shall be die cast aluminum and Shroud-shall be heavy duty spun aluminum
shall contain all electrical components. lt shall be and shall completely envelop the reflector for
supported by the optical assembly by means of at- protection.
tachment to a die cast aluminum optical support Lamp Stabilizer- shall be insulated and shallcush-
with a quick-twist locking device. The ballast hous- ion the lamp from shock or vibration to eliminate
ing shall have a hinged and gasketed weatherproof breakage. ln conjunction with the socket, it shall
cover and shall contain an isolated wiring compart- maintain precision lamp alignment.
ment. Power Mate ballast assemblies - sha ll carry a label
Optical support-shall be die cast aluminum and it as U.L. listed.
shall support the optical assembly by means of 6 Ballasts shall be high power factor and shall be:
platedsteel screws and attach to the ballast hous- Constant Wattage Autotransformer Mercury Lamp
ing by means of two qu:ck-twist cast lugs and two Ballast- rated l000wattswithan inputof (120) {208)
screws. lt shall support a plated mounting trunnion 240], 1277) (utt}O) volts.
and have a positioning quadrant with reposition- Lead Regulator High Pressure Sodium Lamp Bal-
ing stop. lt shall be gasketed at both attachment last- rated (400) (1000) watts with an input rating
points and shall interface with the reflector and bal-
of (120) (208) Q40,t Q77l1zt80) votts.
last housing with metalto metal contact to prevent
any gasket deterioration. Constant Wattage Autotransformer Metal Halide
Optical assembly-The optical assembly shall be Lamp Ballast* rated (400) (1000) (1500) watts with
sealed and completely weatherproof. lt shall con- an input rating of (120) (208) i.240], Q77l (zl8o) volts.
sist of a single piece, spun aluminum reflector Finish - shall be bronze thermoset enamel.
o Easy service and maintenance.
Loosen two screws, a quick
twist and the Power Mate
baliast assembly is removable
1. The light weight optical 2. A quick twist and tighten- 3. Power supply wiring con- 4.To install lamp or re-lamp,
assem b ly mounts easily ing of two screws attaches nections are made in the loosen two trunnion lock-
almost anywhere without the co m pact Power lMate easily accessible thermally ing bolts and swlng the
theweightof the ballast as- ballast assembly to the op- iso lated wirin g compart- floodlight to an upright po-
sembly to contend with, tical support casting. The ment. The entire assembly sition. Unsnap four latches
Pole top. cross arm and die cast aluminum housing is gasketed and sealed on the hinged lens frame
pipe mounting accessories contains all electrical com- against the entrance of and swlng open. lnstall
are ava ila ble. Simply as- ponents includ ing a pre- moisture and outside con- lamp, close and latch lens.
semble the approprlate ac- positioned lamp socket. A taminants. Swing fixture down. A re-
cessory to the floodlight removable aiming slght is positioning stop will allow
trunnion and mount.45 de- located in the top of the fixture to return to its origi-
gree cross arm adapter housing. nal position without re-
ilkrstrated. aiming. Tighten two lock-
ing trunnion bolts.
Photometric Data Additional Photometric Data
Typical Candlepower Distribution Curves
1000W Clear
Metal Halide
1500W Clear
Metal Halide
l
l
l 1000W Clear
High Pressure
The above curves are typical for 1000 watt clear metal hal- Sodium
ide lamps to show shape or width of beam. Specific curves
for all lamps, in accordance with the l"E.S. method of pres-
entation, are ava ilable.
ON APPLICATION
I
i
tl
1i
I
-A
.
McGRAW-EDISON COMPANY
Anea Lighting Division
Flacine. \ /isconsin 534O5
Copyright 1977 Bulletin No. 770409