Documente Academic
Documente Profesional
Documente Cultură
TM
Recommended Installation
Component Assembly
Magnum Weight
(0.85 LB) MAGWGTSLP
1 2
UP3 Nozzle
#7 - #24
UP3NZ07 - UP3NZ24 UP3 Dual Nozzle Carrier
UP3NZCD
ENGINE MODULES
610 (Blue deflector) 615 (Black deflector) 910 (Gray deflector) 605-TOP (White deflector)
6-Groove 10-Degree 6-Groove 15-Degree 9-Groove 10-Degree 6-Groove 5-Degree
XIWEMASM610 XIWEMASM615 XIWEMASM910 Top of pipe
XIWEMASM605T
Always be sure that the engine module is tightly secured onto the bracket.
I
C
CL Notches
MS-1026
14 XiWUP3-IN 11 Call (407) 877-5655 Web: www.senninger.com
Pressure Regulator
10 PSI
0.69 BAR
The Xi-Wob is designed for mounting on semi- Pressure regulators can be installed at the top of
rigid Polyethylene or steel drops. Do not use PVC. the drop or near the applicator.
Pressure Regulator
10 PSI
Mount the Xi-Wob no more than 1 ft (0.3 m) Follow your customized print out for proper
0.69 BAR
below the truss rod when using semi-rigid or pressure regulator placement.
steel drops.
The Xi-Wob is also suitable for flexible hose Important: To maintain product warranty and maximize drop
installations when used with the Magnum Weight. component life, refer to the diagrams.
Use the internal fit technology to nest weight
onto the base of the Xi-Wob. Top of pipe
Top of pipe
Mounting the
Xi-Wob 605 TOP
For use with 3/4"
galvanized nipples or
Senningers impact-
modified thermoplastic
Galvanized Rigid Flex nipple into the mainline
Steel Polyethylene Hose
(maximum 2" length)
Galvanized Rigid The
FlexXi-Wob TOP must
Steel Polyethylene employ
Hose a 10 psi (0.69
bar) pressure regulator
(PSR recommended).
The Xi-Wob TOP
must be installed on
the top-of-pipe along
a center pivot or other
mechanical move
system.
Manifolding two or
more Xi-Wob TOPs
from a single outlet is
not recommended.
14 XiWUP3-IN 11
Call (407) 877-5655 Web: www.senninger.com MS-1026
Made in the U.S.A.