Documente Academic
Documente Profesional
Documente Cultură
1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech I Sem., I Mid-Term Examinations, September - 2017
INSTRUMENTATION AND CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
2. When visual indication of pressure level is required then the instrument generally used is [ ]
a) Monometers b) Diaphragm sensors c) Bourdon tube d) Resonant wire device
6. Photoelectric transducers are used for the measurement of any phenomenon which can be used to
produce [ ]
a) Variation in current b) Variation in voltage
c) Variation in light intensity d) Variation in flux density
10. If at one end, the two wires made of different metals are joined together then a voltage will get produced
between the two wires due to difference of temp between the two ends of wires. This effect is observed in
[ ]
a) Thermocouples b) Thermistors c) RTD d) Ultrasonic
Cont..2
Code No: 117EA :2: Set No. 1
11. The study of relationship between the input and output, when the input is invariant with respect to
time is called as__________________.
13. If the instrument is used in wrong manner while application, then it will results is ____________
errors.
14. The characteristic that provides an output with respect to the relation with the input is called as
___________
16. Normal force acting per unit cross sectional area is called ___________________ .
17. LVDT which is an instrument for the measurement of displacement works on the principle of
________________.
18. The thermocouple circuit which is used to measure temperature works on ____.
-oOo-
Code No: 117EA Set No. 2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
INSTRUMENTATION AND CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
3. Photoelectric transducers are used for the measurement of any phenomenon which can be used to
produce [ ]
a) Variation in current b) Variation in voltage
c) Variation in light intensity d) Variation in flux density
7. If at one end, the two wires made of different metals are joined together then a voltage will get produced
between the two wires due to difference of temp between the two ends of wires. This effect is observed in
[ ]
a) Thermocouples b) Thermistors c) RTD d) Ultrasonic
9. When visual indication of pressure level is required then the instrument generally used is [ ]
a) Monometers b) Diaphragm sensors c) Bourdon tube d) Resonant wire device
Cont..2
Code No: 117EA :2: Set No. 2
11. The characteristic that provides an output with respect to the relation with the input is called as
___________
13. Normal force acting per unit cross sectional area is called ___________________ .
14. LVDT which is an instrument for the measurement of displacement works on the principle of
________________.
15. The thermocouple circuit which is used to measure temperature works on ____.
18. The study of relationship between the input and output, when the input is invariant with respect to
time is called as__________________.
20. If the instrument is used in wrong manner while application, then it will results is ____________
errors.
-oOo-
Code No: 117EA Set No. 3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
INSTRUMENTATION AND CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
5. If at one end, the two wires made of different metals are joined together then a voltage will get produced
between the two wires due to difference of temp between the two ends of wires. This effect is observed in
[ ]
a) Thermocouples b) Thermistors c) RTD d) Ultrasonic
7. When visual indication of pressure level is required then the instrument generally used is [ ]
a) Monometers b) Diaphragm sensors c) Bourdon tube d) Resonant wire device
10. The characteristic of a material or a body which is taken as an indication of change in temperature is
known as [ ]
a) Thermodynamics property b) Thermostatic property
c) Thermometric property d) none of the above
Cont..2
Code No: 117EA :2: Set No. 3
11. Normal force acting per unit cross sectional area is called ___________________ .
12. LVDT which is an instrument for the measurement of displacement works on the principle of
________________.
13. The thermocouple circuit which is used to measure temperature works on ____.
16. The study of relationship between the input and output, when the input is invariant with respect to
time is called as__________________.
18. If the instrument is used in wrong manner while application, then it will results is ____________
errors.
19. The characteristic that provides an output with respect to the relation with the input is called as
___________
-oOo-
Code No: 117EA Set No. 4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
INSTRUMENTATION AND CONTROL SYSTEMS
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
3. If at one end, the two wires made of different metals are joined together then a voltage will get produced
between the two wires due to difference of temp between the two ends of wires. This effect is observed in
[ ]
a) Thermocouples b) Thermistors c) RTD d) Ultrasonic
5. When visual indication of pressure level is required then the instrument generally used is [ ]
a) Monometers b) Diaphragm sensors c) Bourdon tube d) Resonant wire device
9. Photoelectric transducers are used for the measurement of any phenomenon which can be used to
produce [ ]
a) Variation in current b) Variation in voltage
c) Variation in light intensity d) Variation in flux density
Cont..2
Code No: 117EA :2: Set No. 4
12. Normal force acting per unit cross sectional area is called ___________________ .
13. LVDT which is an instrument for the measurement of displacement works on the principle of
________________.
14. The thermocouple circuit which is used to measure temperature works on ____.
17. The study of relationship between the input and output, when the input is invariant with respect to
time is called as__________________.
19. If the instrument is used in wrong manner while application, then it will results is ____________
errors.
20. The characteristic that provides an output with respect to the relation with the input is called as
___________
-oOo-