Documente Academic
Documente Profesional
Documente Cultură
The set retarding characteristics of POZZOLITH 405 1. Introduce either undiluted solution or diluted solution
admixture in the production of concrete with the following of POZZOLITH 405 into the mixer at the mix.
special qualities : 2. POZZOLITH 405 solutions is part of mixing water.
Adjust mixing water content.
Improved workability
Reduced segregation PACKAGING
Superior finishing characteristics for flatwork and
cast surfaces POZZOLITH 405 is available in 205 litres drum and bulk.
Controlled retardation - depending on the addition
Pz405/01/07/05
rate
Provides flexibility in scheduling of placing and
finishing operations
Helps eliminate cold joints
increased strength (compressive, flexural and bond
of concrete to steel)
reduced permeability-improved watertightness
Lowers peak temperature and/or rate of
temperature rise in mass concrete-reduces thermal
cracking
The technical information and application advice given in this BASF Construction Chemicals
publication are based on the present state of our best scientific and practical knowledge. As the
STATEMENT OF information herein is of a general nature, no assumption can be made as to a product's suitability for a
RESPONSIBILITY particular use or application and no warranty as to its accuracy, reliability or completeness either
expressed or implied is given other than those required by law. The user is responsible for checking the
suitability of products for their intended use.
Field service where provided does not constitute supervisory responsibility. Suggestions made by
BASF Construction Chemicals either orally or in writing may be followed, modified or rejected by the
NOTE owner, engineer or contractor since they, and not BASF Construction Chemicals, are responsible for
carrying out procedures appropriate to a specific application.