Documente Academic
Documente Profesional
Documente Cultură
Se poate observa ca toate eforturile compuse Von Mises(prezentate mai sus) sunt mai mici decat
rezistenta materialului(R.aluminiu=160MPa) / It can be noted that all Von Mises efforts (shown
above) are smaller than the material resistance (R. aluminiu = 160MPa)
Se poate observa ca toate eforturile Sigma(prezentate mai sus) sunt mai mici decat rezistenta
materialului(R.aluminiu=160MPa) / It can be noted that all Sigma efforts (shown above) are smaller
than the material resistance (R. aluminiu = 160MPa)
Se poate observa ca toate eforturile compuse Von Mises(prezentate mai sus) sunt mai mici decat
rezistenta materialului(R.aluminiu=160MPa / R.otel=235MPa) / It can be noted that all Von Mises
efforts (shown above) are smaller than the material resistance (R.aluminiu=160Mpa / R. otel =
235MPa)
Se poate observa ca toate eforturile Sigma(prezentate mai sus) sunt mai mici decat rezistenta
materialului(R.aluminiu=160MPa / R.otel=235MPa) / It can be noted that all Sigma efforts (shown
above) are smaller than the material resistance (R.aluminiu=160MPa / R.otel=235MPa).
In cazul in care eforturile Sigma(prezentate mai sus) sunt mai mari decat rezistenta materialului
majorata cu 50%(R.aluminiu=160x1.5=240MPa) apar deformatii plastice pe casetele de bond / If
Sigma efforts (shown above) are biger than the material resistance multiplied by 1.5
(R.aluminiu=160x1.5=240MPa) the bond cassettes will remain deformed(plastic deformation).
Verificarea SLU conform normativelor in vigoare este indeplinita daca eforturile sunt mai mici de
160MPa / The SLU verification according to the regulation norms is fulfilled if the efforts are less
than 160MPa.
BB77828525
2374188010
Cu respect,
Ing. Radu Sumedrea
0771713564
Salve,
Am atasat urmatoarele:
1. tabelul de vant;
2. anexa de calcul PC;
3. sectiune vert + detalii montaj piese
4. detalii executie PF1(RADU);
5. detalii executie D1Sx si D1Dx(CRISTI);