Documente Academic
Documente Profesional
Documente Cultură
Menu Overview
Tasks
1. Hover and Click each item in the main Menu.
2. View the corresponding Side Menu items (after clicking on a main menu item).
Editing a Well
Tasks
1. Create a new well.
Tasks
1. Hover and Click on the highlighted Motor (Generic) tool in the Inventory list.
2. Select a Stator Stabilizer, and enter stabilizer Detail info.
3. Select an AKO Bend Type, and enter AKO bend Detail info.
4. Save.
Tasks
1. Open RTViz by navigating to Realtime > Data Display > RT Visualization.
2. Open System Folder > Navigamma-STRose-MWD-VSS-Surface.xml.
3. Enable Edit mode by (right-clicking) on any data widget, log track, or white
space and selecting "Enter edit mode" from the menu.
4. Drag the widget around the screen and Drop back in position.
5. Double-Click on Data Widget with GRAX and edit the Label field with "INC" and
the Mnemonic field with "SVYINC".
6. Save As the edited template with a new template name called "UserTest" in the
User file directory.
1
The vertical Section calculation should use whatever origin and azimuth is cited on the drilling plot being used at the rig
site.
2
If Tie-On Survey data is available.
Reference Data
1
Normally only under Survey Management supervision.
2
Baker Hughes model unless commented otherwise.
Comments
Reference TVD at 837 ft
Sign off
Produced by: Checked by:
Date 28-Jun-2015 Date:
Page 85 of 88
Uncontrolled when printedconfirm the correct revision is used Baker HughesCompany Confidential
ESSO EXPLORATION & PRODUCTION NIGERIA LTD.
Location: Offshore_2 Slot: Slot B
Field: USAN Well: USN-122
Facility: USAN / TWN-02 Wellbore: USN-122
Tie-On Position
MD (m) Inc () Az () TVD (m) Local N (m) Local E (m) Grid East (m) Grid North (m) Latitude Longitude
0.00 0.000 62.158 0.00 0.00 0.00 660000.00 394866.00 334'16.667"N 726'25.825"E
Scale 1 cm = 28 m
Easting (m)
Northing (m)
Tie On : 0.00Inc, 0.00m MD, -0.00m TVD, 0.00m VS
1.50/30m
Scale 1 cm = 180 m
Vertical Section (m)
Azimuth 62.35with reference 0.00 N, 0.00 E