Documente Academic
Documente Profesional
Documente Cultură
ARGUS movement
detectors
Presentation 2
ARGUS surface-mounted
movement detectors 6
ARGUS flush-/surface-
mounted movement
detectors 14
Index 18
ISC01221_09_2016_EN 1
The best of safety
and comfort
ARGUS movement detectors
2
No one will get past you
without knowing
ARGUS movement detectors
ARGUS surface-mounted movement detectors: The right solution for every application.
3
Illuminating
Arguments
4
Advantages at a glance
ARGUS movement detectors dont just represent solutions
for intelligent buildings in terms of innovative technology
alone they also prove themselves down to the smallest
detail. Here are the most important advantages of ARGUS
surface-mounted movement detectors:
A larger wiring compart- Connectors between the Wall spacers facilitate The special high-
ment ensures sufficient insert and connection perfect installation on resolution lens with three
room for quick wiring. box make the installation uneven walls or if cables wide-ranging levels and
Four cable inlets for particularly easy. are fed from overhead. 448 switching segments
looping provide for (ARGUS 220) provides
convenient installation. for perfect detection
quality.
The fully adjustable Snap-in segments make Special protection against Integrated rear surveil-
spherical lens facilitates it possible to mask intruders crawling on all lance switches the light
both wall and ceiling individual areas, without fours is also provided. on even before your
mounting, without changing the appearance. customers exit the
changing the appearance. building.
5
ARGUS movement detectors
Electronic outdoor movement detector. 110 surface monitoring for smaller house fronts and
sections of the house.
360 short-range zone with a radius of approx. 4 m.
Very easy installation thanks to large wiring compartment and plug-in connection system.
Looping through is possible.
Integrated LED function display for alignment at installation site.
Potentiometers for adjustment are protected under the easily accessible cover plate.
Can be installed on walls and ceilings without additional accessories.
Can be mounted on inner/outer corners and stationary pipes with installation bracket,
art. no. MTN5652...
The area of detection can be adjusted to local conditions with the aid of the spherical head
which can be adjusted horizontally, vertically and axially.
The design is independent of the position of the sensor head.
Possible to blank out individual lens areas.
Under the cover plate there are potentiometers for setting the brightness and time.
Mains voltage: AC 230V, 10%, 50Hz
Incandescent lamps: AC 230V, max. 2000W
Halogen lamps: AC 230V, max. 1200W
Fluorescent lamps: AC 230V, 1200W uncompensated
Capacitive load: max. 35F
Max. switching current: 16A, AC 230V, cos = 1
Angle of detection: 110
Range: max. 12 m
Number of levels: 7
Number of zones: 92 with 368 switching segments
Light sensor: infinitely adjustable from 3-1000lux
Time: 1sec. to approx. 8min. in 6levels
Neutral conductor: required
Possible to set the sensor headWall mounting: 9 up, 24 down, 12 left/right, 12 axial
Ceiling mounting: 4 up, 29 down, 25 left/right, 8.5 axial
EC guidelines: Low voltage guideline 73/23/EEC and EMC guideline 89/336/EEC
Type of protection: IP55
Accessories: Mounting bracket, art. no. MTN565291.
Capacitor, art. no. MTN542895.
Contents: With cover plate and segments to limit the area of detection, screws and plugs.
6 ISC01221_09_2016_EN
ARGUS movement detectors
Electronic outdoor movement detector. 220 surface monitoring for large house fronts and
sections of the house.
The movement detector for outdoor areas.
360 short-range zone with a radius of approx. 4 m.
Very easy installation thanks to large wiring compartment and plug-in connection system.
Looping through is possible.
Integrated LED function display for alignment at installation site.
Potentiometers for adjustment are protected under the easily accessible cover plate.
Can be installed on walls and ceilings without additional accessories.
Can be mounted on inner/outer corners and stationary pipes with installation bracket,
art. no. MTN5652...
The area of detection can be adjusted to local conditions with the aid of the spherical head
which can be adjusted horizontally, vertically and axially.
The design is independent of the position of the sensor head.
Possible to blank out individual lens areas.
Under the cover plate there are potentiometers for setting the brightness and time.
Mains voltage: AC 230V, 10%, 50Hz
Incandescent lamps: AC 230V, max. 2000W
Halogen lamps: AC 230V, max. 1200W
Fluorescent lamps: AC 230V, 1200W uncompensated
Capacitive load: max. 35F
Max. switching current: 16A, AC 230V, cos = 1
Angle of detection: 220
Range: max. 12 m
Number of levels: 7
Number of zones: 112 with 448 switching segments
Light sensor: infinitely adjustable from 3-1000lux
Time: 1sec. to approx. 8min. in 6levels
Neutral conductor: required
Possible to set the sensor headWall mounting: 9 up, 24 down, 12 left/right, 12 axial
Ceiling mounting: 4 up, 29 down, 25 left/right, 8.5 axial
EC guidelines: Low voltage guideline 73/23/EEC and EMC guideline 89/336/EEC
Type of protection: IP55
Accessories: Mounting bracket, art. no. MTN565291.
Capacitor, art. no. MTN542895.
Contents: With cover plate and segments to limit the area of detection, screws and plugs.
ISC01221_09_2016_EN 7
ARGUS movement detectors
MTN5628-3119
Electronic outdoor movement detector. 220 surface monitoring for large house fronts and
sections of the house.
With an integrated interface for extension with a radio module (wireless connection of several
devices).
360 short-range zone (approx. 4 m radius).
Large wiring compartment and plug system.
Looping is possible.
LED function display for fast alignment at the installation site.
Operating elements are protected under the easily accessible cover plate.
Flexibly adjustable sensor head.
Possible to blank out individual lens areas.
Can be installed on walls and ceilings without additional accessories. Can be mounted on
inner/outer corners and stationary pipes using a mounting bracket.
Functions: The following functions are possible via radio with an integrated radio module:
Permanent ON, Permanent OFF and AUTOMATIC.
Nominal voltage: AC 220/230 V , 50Hz
Nominal current: 10AX, AC 230V, cos = 0.6
Incandescent lamps: AC 230V, max. 2200W
HV halogen lamps: AC 230V, max. 2000W
LV halogen lamps: AC 230V, max. 500VA with wound transformer
AC 230V, max. 1050W with electronic transformers
Capacitive load: 10A, max. 140F
Energy-saving lamps: AC 230V, max. 100 VA
Motor load: AC 230V, max. 1000VA
Power consumption: < 1 W
Angle of detection: 220
Range: max. 16 m
Number of levels: 7
Number of zones: 112 with 448 switching segments
Light sensor: infinitely adjustable from 3-1000lux
Switching duration: 1sec. to approx. 8min. in 6levels
Sensitivity: infinitely adjustable
Neutral conductor: required
Possible to set the sensor headWall mounting: 9 up, 24 down, 12 left/right, 12 axial
Ceiling mounting: 4 up, 29 down, 25 left/right, 8.5 axial
EC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/EC
Type of protection: IP55
Accessories: Mounting bracket MTN565291
Capacitor MTN542895
Contents: With cover plate and segments to limit the area of detection, screws and plugs.
Mounting bracket
Installation bracket for attaching the ARGUS 110/220 Basic, Timer or Connect to outer or inner
corners. Can also be secured to fixed pipes (VDE 0100) with conventional conduit clips.
Contents: With screws and plugs. Without conduit clip.
8 ISC01221_09_2016_EN
ARGUS movement detectors
ARGUS 300
Extension
The extension between wall bracket and sensor head can be installed for the ARGUS 300 in
order to increase the distance between the movement detector and the wall.
Obstacles such as downpipes, which blank the area of detection if mounted on corners, can
be prevented.
Length: 11.5 cm
ISC01221_09_2016_EN 9
ARGUS movement detectors
ARGUS 360
10 ISC01221_09_2016_EN
ARGUS movement detectors
CCT551003
SAE-UE-MS-IR-WE
ISC01221_09_2016_EN 11
ARGUS movement detectors
white CCT552006
CCT556006
12 ISC01221_09_2016_EN
ARGUS movement detectors
white CCT555006
For detection extension for ARGUS presence detector DALI 230V - 2 zones master
Functions:
Presence detection via passive infra-red technology
Records movements and communicates them to the DALI master.
Continuous sensitivity/range setting
Mains voltage: AC 220-240 V, 50/60 Hz
Max. 10 slaves per master
Angle of detection: 360
Range: Radius of max. 4 m (at 2.5 m mounting height)
Connection: 3-wire, neutral conductor required
Operating temperature: at room temperature
IP protection rating: IP40 or IP42 depending on installation type
Colour: white
Dimensions (LxWxH):
102 x 90 (flush mounted)
102 x 59 (surface mounted)
To be completed with: ARGUS Presence detector DALI 230V - 2 zones master CCT552006
ISC01221_09_2016_EN 13
ARGUS movement detectors
CCT551023
CCT556023
14 ISC01221_09_2016_EN
ARGUS movement detectors
ARGUS Presence detector Dual-Tech with PIR and Ultrasonic detection - 1 channel
CCT551011
ISC01221_09_2016_EN 15
ARGUS movement detectors
ARGUS Presence detector Dual-Tech with PIR and Ultrasonic detection - 2 channel
CCT551012
CCT556011
16 ISC01221_09_2016_EN
ARGUS movement detectors
Accessories
Capacitor
AC 230 V, 0.33 F
For use in push-button circuits to prevent flickering of the neon lamp and/or instantaneous
switching of the installation relay when several push-buttons with neon lamps are in use.
For interference suppression of inductive loads, e.g. relays, contactors, fluorescent lamps,
transformers, if the induction voltage of these devices leads to the retriggering of the ARGUS.
ISC01221_09_2016_EN 17
Index
CCT551003 11
CCT551011 15
CCT551012 16
CCT551023 14
CCT552006 12
CCT555006 13
CCT556006 12
CCT556011 16
CCT556023 14
MTN5628-3119 8
MTN542895 17
MTN554399 9
MTN564319 9
MTN564419 10
MTN565119 6
MTN565219 7
MTN565291 8
SAE-UE-MS-IR-WE 11
18 ISC01221_09_2016_EN