Documente Academic
Documente Profesional
Documente Cultură
1
General Safety Rules
Safety comes first!
Comply with all company standards, safety rules, laws, and local
and industry standards
Maintain and test the tools according to applicable standards (IEEE,
ASTM, IEC, etc.)
Hold a pre-work meeting before starting the job
Use the tools appropriate for the job to be done
Inspect all tools and equipment prior to starting the job
Clean all Epoxiglas surfaces before starting the job and after
finishing
When not in use properly store the tools in a clean and protected
place and never on the ground
Observe minimum approach distances for the voltage being worked
Minimum Approach Distance (MAD)
Sticks are not rated
Tested at 100kV per foot
Condition of hot stick affects insulation
3
Tool care at the work site
Use tarps and stands to lay
out the tools and equipment
for the job
Clean, inspect, and test all of
the tools and equipment
Hold a pre-work meeting
Complete the job
Keep tools off of the ground
Clean the tools again before
storing
Chain Hoist Care Instructions
PSC3011S001
5
Chain Hoist Use Instructions
Read and understand all instructions and warnings prior to use
Always inspect prior to each use
6
Chain Hoist Use Instructions
7
Strap Hoist Care Instructions
PSC3090467
and
PSC3090468
Instructional Video CHANCE
Nylon Strap Hoist and Link Stick
Electrical Tests available at:
http://videos.hubbellpowersys
tems.com/category/videos/lin
eman-tools
8
Strap Hoist Use Instructions
Read and understand all instructions and warnings prior to use
For live line applications always use an insulated link stick
Always inspect prior to each use
9
Strap Hoist Use Instructions
10
Strap Hoist Use Instructions
11
Blocks and Handline Hook
M1849
12
Epoxiglas Tools
C4000574
H464510
C4033068 C4030292 H17604 H46468
and and C4030185 H18916 and H185525 C4001175 H464712
C4033069 C4030293 H176010 H464716
13
Epoxiglas Cutters
C4031384
H18716
C4032862
14
Epoxiglas Conductor Support Equipment
C4000075
H48628 M48057
C4000517
H4809W
H486251 C4001509
15
Epoxiglas Tools
H4717 and
H47171
C4000812
S16007
H47146 T4000870
16
Epoxiglas Cleaning and Maintenance
Clean before and after every use
Use Silicone wipes for everyday cleaning
Use Moisture Eater II wipes for heavy
contamination, always followed by a Silicone
wipe
Inspect before each use for:
Any damage
Contamination
Damaged, loose, or missing components
Correct operation
Damaged hot sticks Remove from
service for repair or replacement
Gloss restorer kit
Other repair kits
17
Epoxiglas Maintenance
The most common damage
comes from impacts,
abrasions, or from using the
tool as a pry bar
Typical repairs:
Replacing damaged or
missing components
Repair small surface ruptures
Restoration of the gloss
finish
Epoxiglas Testing
19
Ratchet Cable Cutters
20
Ratchet Cable Cutters - Instructions
21
Temporary Cutout
Read and understand all instructions and warnings prior to use
PSC6010342
22
Temporary Cutout - Instructions
23
Temporary Cutout - Instructions
24
Temporary Cutout - Instructions
25
Temporary Cutout - Instructions
26
Temporary Cutout - Instructions
27
Jumpers
G4775
28
Covers
C4060514GA
C4060537
C4060102
C4060557 (12) C4060097
C4060557L (16)
M49376
C4060000 C4060547 M4933
33
Covers
C4060299
C4060309
C4060348 C4060346
34
Covers - Cleaning and Maintenance
Inspect before every use for:
Any defects
Contamination
Damaged, loose, or missing components
Clean regularly
Water and neutral soap or Moisture Eater II for line
hose, polyethylene covers, and blankets
Only water and neutral soap for ABS plastic covers
Use Silicone wipes or spray to lubricate the interior of
line hoses
Damaged covers Remove from Service
Store all covers and blankets in a clean, dry, and
protected area out of direct sun light
Store blankets rolled up never folded
We recommend using storage tubes
35
Covers- Testing
Hard Covers
Design tested per ASTM F712 and IEC 61229
Per IEC 61229 perform periodic testing at least once
every 12 months or according to local standards
Line Hose
Design tested per ASTM D1050
Per ASTM F478 perform electrical testing if electrical
integrity is suspect or according to local standards
Rubber Blankets
Design tested per ASTM D1048 and IEC 61112
Per ASTM F479 and IEC 61112 perform periodic testing
at least once a year or per the local standards
36
Accessories
M445523 and
P4030369P
(blades)
M1860
M445519 M445587 M445550 M44556
C4031416
37
Accessories Conductor Support
38
Accessories Conductor Support
M1847 M1846W
M47602
C4001016
M4760W
39
Accessories Blankets and Tools
M4660
C4170150 C4170144
C4170146
40
Accessories Instructions
41
Wet/Dry Hot Stick Tester
Read and understand all instructions and warnings prior to use
42
Wet/Dry Hot Stick Tester - Instructions
43
Wet/Dry Hot Stick Tester - Instructions
44
Wet/Dry Hot Stick Tester - Instructions
45
Wet/Dry Hot Stick Tester - Instructions
46
Wet/Dry Hot Stick Tester - Instructions
47
Wet/Dry Hot Stick Tester - Instructions
48
Wet/Dry Hot Stick Tester - Instructions
49
Other
T165640H WPH3
T165650H
50
Epoxiglas Cleaning Kit
Comprised of:
Moisture Eater II
Abrasive Cleaning Pads
Gloss Restorer Kit
Hot Stick Wiping Cloths
C4002365
Instructional Video CHANCE Care and Maintenance of Hot Line Tools available at:
http://videos.hubbellpowersystems.com/category/videos/lineman-tools?page=1
51
Moisture Eater II Epoxiglas Cleaner
Read and
understand all
instructions
and full MSDS
prior to use.
C4002364
(also in C4002365)
52
Abrasive Cleaning Pads
Read and
understand all
instructions
and full MSDS
prior to use.
C4001166
(included in C4002365)
53
Gloss Restorer Kit Part A
Read and
understand all
instructions
and full MSDS
prior to use.
C4001520
(included in C4002365)
54
Gloss Restorer Kit Part B
Read and
understand all
instructions
and full MSDS
prior to use.
C4001520
(included in C4002365)
55
Hot Stick Wiping Cloths
Read and
understand all
instructions
and full MSDS
prior to use.
M1904
(included in C4002365)
56
Silicone Wipes Epoxiglas Cleaner
Read and
understand all
instructions and
full MSDS prior
to use.
C4002568
57
Silicone Lubricant lubrication of line hose
Read and
understand all
instructions
and full MSDS
prior to use.
C4002320
58
Epoxiglas Bond Patching Kit
Read and
understand all
instructions
and full MSDS
prior to use.
H1917
Instructional Video CHANCE Care and Maintenance of Hot Line Tools available at:
http://videos.hubbellpowersystems.com/category/videos/lineman-tools?page=1
59
Questions?