Documente Academic
Documente Profesional
Documente Cultură
OPEN/CLOSE
DVD PLAYER DV-2850
TOP MENU MENU
ORDER NO.
RRV3123
HOME
MENU RETURN
DV-2850-S
DVD PLAYER
DV-2850-S
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model Type Power Requirement Region No. Remarks
SAFETY INFORMATION
A
This service manual is intended for qualified service technicians ; it is not meant for the casual do-
it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and
may void the warranty. If you are not qualified to perform the repair of this product properly and
safely, you should not risk trying to do so and refer the repair to a qualified service technician.
WARNING !
B THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1
BUT THE LASER COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR
CLASS 1.
A SPECIALLY INSTRUCTED PERSON SHOULD DO SERVICING OPERATION OF THE APPARATUS.
LABEL CHECK
Location: inside of the unit
CAUTION : VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. 7260000356 SH
VORSICHT : SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG,WENNABDECKUNG GEFFNET NICHT DEM STRAHL AUSSETZEN !
ADVARSEL : SYNLIG OG USYNLIG LASERSTRLING VED BNING UNDG UDSTTELSE FOR STRLING.
VARNING : SYNLIG OCH OSYNLIG LASERSTRLNING NR DENNA DEL R PPNAD BETRAKTA EJ STRLEN.
VARO! : AVATTAESSA ALTISTUT NKYV JA NKYMTTMLLE LASERSATEIL YLLE. L KATSO STEESEN.
CUIDADO : RADIACIN LSER VISIBLE E INVISIBLE AL ESTAR ABIERTO. EVITAR EXPOSICIN AL RAYO.
2. When the cover is open, close viewing through the objective lens with
the naked eye will cause exposure to the laser beam.
2 DV-2850-S
1 2 3 4
5 6 7 8
Please follow the specified safety methods when modification(addition/change of parts) is required due to interferences such as
radio/TV interference and foreign noise.
B
3 Make sure the soldering of repaired locations is properly performed.
When you solder while repairing, please be sure that there are no cold solder and other debris.
Soldering should be finished with the proper quantity. (Refer to the example)
Please be sure that all screws are fastened, and that there are no loose screws.
Please be sure that all connectors are inserted, and that there are no imperfect insertion.
6 Make sure the wiring cables are set to their original state.
Please replace the wiring and cables to the original state after repairs. C
In addition, be sure that there are no pinched wires, etc.
7 Make sure screws and soldering scraps do not remain inside the product.
Please check that neither solder debris nor screws remain inside the product.
8 There should be no semi-broken wires, scratches, melting, etc. on the coating of the power cord.
Damaged power cords may lead to fire accidents, so please be sure that there are no damages.
If you find a damaged power cord, please exchange it with a suitable one.
When spark traces or similar marks are found on the power supply plug, please check the connection and advise on secure
connections and suitable usage. Please exchange the power cord if necessary.
D
0 Safe environment should be secured during servicing.
When you perform repairs, please pay attention to static electricity, furniture, household articles, etc. in order to prevent injuries.
Please pay attention to your surroundings and repair safely.
2. Adjustments
To keep the original performance of the products, optimum adjustments and confirmation of characteristics within specification.
Adjustments should be performed in accordance with the procedures/instructions described in this manual.
4. Cleaning
For parts that require cleaning, such as optical pickups, tape deck heads, lenses and mirrors used in projection monitors, proper
cleaning should be performed to restore their performances.
DV-2850-S 3
5 6 7 8
1 2 3 4
CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
A
2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 6
2.1 PACKING SECTION .................................................................................................................................. 6
2.2 EXTERIOR SECTION............................................................................................................................... 8
2.3 05 DVD MECHA SECTION...................................................................................................................... 10
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 12
3.1 BLOCK DIAGRAM ................................................................................................................................... 12
3.2 OVERALL WIRING CONNECTION DIAGRAM........................................................................................ 14
3.3 DVD MT PCB (1/5) ASSY ........................................................................................................................ 16
3.4 DVD MT PCB (2/5) ASSY ........................................................................................................................ 18
3.5 DVD MT PCB (3/5) ASSY ........................................................................................................................ 20
3.6 DVD MT PCB (4/5) ASSY ........................................................................................................................ 22
3.7 DVD MT PCB (5/5) ASSY ........................................................................................................................ 24
B 3.8 OPERATION, OPERATION 2 and OPERATION 3 PCB ASSYS ............................................................. 26
3.9 POWER PCB (1/2) ASSY ........................................................................................................................ 28
3.10 POWER PCB (2/2) ASSY ...................................................................................................................... 30
3.11 WAVEFORMS ........................................................................................................................................ 32
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 35
4.1 LOADING and SW PCB ASSYS.............................................................................................................. 35
4.2 DVD MT PCB ASSY................................................................................................................................. 36
4.3 OPERATION, OPERATION 2 and OPERATION 3 PCB ASSYS ............................................................. 40
4.4 POWER PCB ASSY................................................................................................................................. 44
5. PCB PARTS LIST ........................................................................................................................................... 46
6. ADJUSTMENT ............................................................................................................................................... 52
6.1 WHEN REPLACING DVD DECK ............................................................................................................. 52
C 6.2 TEST MODE ............................................................................................................................................ 53
6.3 DISC REMOVAL METHOD...................................................................................................................... 54
7. GENERAL INFORMATION ............................................................................................................................. 55
7.1 DIAGNOSIS ............................................................................................................................................. 55
7.1.1 TEST MODE IN ................................................................................................................................. 55
7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE............................................................................ 56
7.1.3 FUNCTIONAL SPECIFICATION OF THE SHORTCUT KEY ............................................................ 57
7.1.4 SPECIFICATION OF MODEL INFORMATION DISPLAY .................................................................. 58
7.1.5 FUNCTIONAL SPECIFICATION OF THE SERVICE MODE ............................................................. 59
7.1.6 METHOD FOR DIAGNOSING DEGRADATION OF THE LDS ON THE PICKUP ASSY .................. 60
7.1.7 TROUBLE SHOOTING ...................................................................................................................... 61
7.2 DISASSEMBLY ........................................................................................................................................ 63
D
7.3 IC INFORMATION.................................................................................................................................... 68
7.4 DISC / CONTENT FORMAT PLAYBACK COMPATIBILITY ..................................................................... 78
8. PANEL FACILITIES ........................................................................................................................................ 80
8.1 FRONT PANEL SECTION ....................................................................................................................... 80
8.2 DISPLAY .................................................................................................................................................. 81
8.3 REMOTE CONTROL ............................................................................................................................... 82
4 DV-2850-S
1 2 3 4
5 6 7 8
1. SPECIFICATIONS
A
Specifications S-video output
Y (luminance) - Output level . . . 1 Vp-p (75 )
C (color) - Output level. . . . . 286 mVp-p (75 )
General Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . S-video
System . . . . . . . . . . . . . . . . . . . . . . DVD player
Power requirements . . AC 220240 V, 50/60 Hz
Power consumption . . . . . . . . . . . . . . . . . 7 W Video output
Power consumption (standby) . . . . . . 0.75 W Output level . . . . . . . . . . . . . . . 1 Vp-p (75)
Weight . . . . . . . . . . . . . . . . . . . . . . . . 1.7kg Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA
Dimensions:
Audio output ( 1 stereo pair) B
DV-2850 . . . 420 (W) x 49.5 (H) x 213.6 (D) mm
Output level . . . . . . . . . . During audio output
Operating temperature . . . . . . . +5C to +35C 200 mVrms (1 kHz, 20 dB)
Operating humidity . . . . . . . . . . . . . 5% to 85% Number of channels . . . . . . . . . . . . . . . . . . . 2
(no condensation) Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA
Digital output
PIN no. Coaxial digital output . . . . . . . . . . . . . RCAjack
1. . . . . . . . . . . . . . . . . . . . . . . . Audio 2/R out
3. . . . . . . . . . . . . . . . . . . . . . . . . . Audio 1/L out Accessories
4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND D
Audio/video cable. . . . . . . . . . . . . . . . . . . . . . . . 1
7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B out
Power cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Status
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 1
11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G out
AA/R6P dry cell batteries . . . . . . . . . . . . . . . . . 2
15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R out
Warranty card. . . . . . . . . . . . . . . . . . . . . . . . . . . 1
17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND
Operating Instructions
19. . . . . . . . . . . . . . . . . . . . . . . . . . . Video out
21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND
The specifications and design of this product are subject to
Component video output change without notice, due to improvement.
Y (luminance) - Output level . . . 1 Vp-p (75 ) E
PB (color) - Output level . . . . 0.7 Vp-p (75 ) Published by Pioneer Corporation.
PR (color) - Output level . . . . . 0.7 Vp-p (75 ) Copyright 2005 Pioneer Corporation.
All rights reserved
Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA
DV-2850-S 5
5 6 7 8
1 2 3 4
B 4
4 1
16
16
6
12
C
6
8-10
"Operating Instructions" 12
1
14
14
11
E
13
15
Fr
on
t
6 DV-2850-S
1 2 3 4
5 6 7 8
PACKING SECTION parts List
Mark No. Description Part No. Mark No. Description Part No.
> 1 Cord Set AC See Contrast table (2) 11 Package, Pad 792WHA0604
2 Cord, RCA Pin 06CPBA2006 12 Polyethylene Bag See Contrast table (2) A
3 Remote Control VXX2914 13 Gift Sheet 791WHA0108
4 Battery Cover VNK4998 14 Package See Contrast table (2)
NSP 5 Battery,Mangan (AR, R6P) 141L003010 15 Gift Box See Contrast table (2)
DV-2850-S 7
5 6 7 8
1 2 3 4
NON-CONTACT 20 20
SIDE 17
CONTACT SIDE
Refer to
"2.3 05 DVD MECHA ASSY". 20
5
18
B
18
18
PCB240
(POWER PCB ASS'Y) 20
19 4 19
9
18
19 6
F 21
C
25
19
11 21
24
12
23 21
12
16 13
19
D 19
13 19
16 10
PCBDF0 8
(OPERATION 3 PCB ASS'Y)
PCB280
27 22
13
(OPERATION 2 PCB ASS'Y) A
3
G 22 19
13
101K C 22 1 PCB130
(DVD PCB ASS'Y)
101E 101C
E
101N 22
101D 101G
101H 101B 7
26 B
2
PCB270
(OPERATION PCB ASS'Y)
101L 101J
15
101I
101 101F
101M
101A
F " FRONT PANEL SECTION".
8 DV-2850-S
1 2 3 4
5 6 7 8
EXTERIOR SECTION parts List
Mark No. Description Part No.
1 DVD MT PCB Assy A2G502A130
2 OPERATION PCB Assy A2G501A270 A
3 OPERATION 2 PCB Assy A2G501A280
> 4 POWER PCB Assy A2G502A240
> 5 DVD MECHA ASSY A2F101A650
6 Shield,21Pin 761WSA0237
7 PLATE, FIP 752WSA0466
8 Plate,Bottom 702WSA0243
> 9 Fuse (F501 : 1.6A) 080NT1R604
10 Sheet,Caution 7260000356
26 Double,Face-Tape 7290000156
27 OPERATION 3 PCB Assy A2G501ADF0
101 Front Cabi Assy 7A7010108A
NSP 101A Cabinet,Front 701WPJ1346
NSP 101B Plate,Display 711WPA0226 D
DV-2850-S 9
5 6 7 8
1 2 3 4
A
34 9
18
14
Cannot supply separately.
AB If the repair is needed, replace the
Lubricating Oil LOADER SUB ASS'Y.
GYA1001 21
15
B
11
Daifree AB
GEM1036
AB
AB
AC
AB
AB 23
20
C
AB 4 Lubricating Oil
GYA1001
3 19
12
AC
29
6 CD2001 SW1 1 E
PCB610
5 (LOADING MOTOR PCB ASS'Y)
D
32
24 7
35 31
10 CD2302
10 DV-2850-S
1 2 3 4
5 6 7 8
05 DVD MECHA SECTION parts List
Mark No. Description Part No.
1 Loading Motor PCB Assy A2F101A610
2 Gear,Middle 92P100117A A
> 3 Loading Motor 1515S98004
4 Pulley,Motor 92P100097A
> 5 FEED Motor 1515S98004
11 Frame,main 92P100119A B
12 Tray (B) 92P100127A
13 Holder ,Traverse 92P100125A
14 Gear,Pulley 92P100123A
15 Gear,Main 92P100124A
16 Gear,Feed 92P100116A
17 SW PCB Assy (PCB640) A2F101A640
18 Plate,Clamper 92P000023A
19 Loader SUB Assy 92AAA0019A
20 Clamper 92P100122A
C
21 Screw,Pan (M1.7x3 P3) 814011730U
22 Screw,Pan (M1.7x2.3 P3) 814011723U
23 Rack,Loading 92P100121A
24 Gear,Motor 92P100088A
25 Feed Rack Assy 92AAA0017A
DV-2850-S 11
5 6 7 8
1 2 3 4
ASSY
CP2301
A
11 11 3 ASPDIF
B 225
10 10 4 ASDAT0
C 217
7 7 5
D
6 6 2
E
PICKUP 5 5 18
F
2 2 19
B
T+ IC4002
21 21 7
T MPEG / MICON
22 22 6 S_Y
F+ / RF-AMP 194
23 23 9 S_C
F IC2301 196
24 24 8
R/CR
Motor Drive 203
11
IC G/Y
200
D 10
202
B/CB
CVBS
SW PCB ASSY 198
13 12 5 4 48 49 228 229
CD2301 CP2303
SPINDLE SP1+
MOTOR
M 6 1
SP1
5 2
SLED SLD+ X4001
M 4 3
MOTOR SLD (27MHz)
3 4
C
E
LOADING MOTOR
PCB ASSY
CD2302 CP2302
LOADING LD+
MOTOR
M 2 4
LD
1 5
OPEN
3 3
SW1 CLOSE
5 1
D
C
OPERATION 2
PCB ASSY
CP4002
6 9 11 10
FLDC+
FLDC
V+3E
-28V
CP605
6 9 11 10
E CP601
CP604 V+3E
CP603 CP602
IC651
30
FIP Driver IC
Power
V651 FL TUBE
F
G OPERATION 3 B OPERATION
PCB ASSY PCB ASSY
12 DV-2850-S
1 2 3 4
5 6 7 8
J8004
DIGITAL OUT
IC8004 IC8003 COAXIAL
Audio DAC Audio LPF
2 ch & AMP J8003
V-OUT L
7 2 1 L
2 V-OUT R AUDIO OUT
8 6 7 R
B
J8002
S_Y OUT
6 21
S_C OUT S VIDEO OUT
2 26
R/CR out
14 16
G/Y out
9 2 J8001
10 20 4 5
B/CB out Y
12 18 7 11
CB VIDEO
4 23
V out 10
3
CR OUT F POWER PCB ASSY
IC8002 CVBS
6
Video Driver
6 ch IC8001 CP8001 CP503 J8101
4 ch BUS SW 5
R
8 15 R
G
1 12 11 G
B
3 10 7 B SCART
8
CVBS
5 19 CVBS C
AUDIO L
10 3 3 L
AUDIO R
12 1 1 R
(AUDIO AMP)
(VIDEO OPT/COAX)
(AUDIO MUTE)
(AUDIO DAC)
(MOTOR)
(OPU)
3 3
(CORE)
P.CON+5V
5 5 F501
IC4006 V+3F 6
P.CON+6V
6 Fuse J501
V+1P8
REG+1.8V IC V+3 V+3A V+3E P.CON+3.3V L
8 8 AC IN
AT+3.3V N
2 3 9 9
(MPEG SDRAM FLASH)
(FLIP/LED/IR/RESET)
FL DC
12
FL DC+
12 D
13 13
-28V
14 14
T501
Power Transformer
DV-2850-S 13
5 6 7 8
1 2 3 4
D SW PCB ASSY
(A2F101A640) CD2301 CP2303
2H062102 FFC
SPINDLE M2601 SPINDLE MOTOR (+) 6 1 1 SP1+
MOTOR JCV9B06
M
SPINDLE MOTOR (-) 5 2 2 SP1-
SW2 M2602 FEED MOTOR (+) 4 3 3 SLD+
ESE22MH24
BCZ3B03
M
FEED MOTOR (-) 3 4 4 SLD-
SLED MOTOR
PICK UP INNER LIMIT SWITCH 2 5 5 LIMIT SW
D GND(SW) 1 6 6 SW(GND)
LOADING MOTOR
E PCB ASSY
(A2F101A610) CD2302
2H052601 CP2302
SW1 SW-2(CLOSE) 5 1 CLOSE
SSS-13-2
GND(SW) 4 2 GND(D)
SW-1(OPEN) 3 3 OPEN
LOADING MOTOR(+) 2 4 LD+
M2603 M
BCZ3B52 LOADING MOTOR(-) 1 5 LD-
LOADING MOTOR
FG SENSER CP4002
E 069EVB3030 1 2 3 4 5 6 7 8 9 10 11
DI (M to F)
DO (F to M)
DGND
DGND
FL DC+
CD601(11P FFC)
C
STB
FL DC
28V
V+ 3E
CLK
122H0B1002
IR
069EV53050
CP602 CP603
OPERATION 2
(A2G501A280)
CP605
CP604
069EV53050
G 069EV93050
IR 1 1 9 9
069EV93050
IR
1 2 3 4 5 6 7 8 9 10 11
CP601
PCB ASSY
14 DV-2850-S
1 2 3 4
5 6 7 8
When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or
"PCB PARTS LIST". A
The > mark found on some component parts indicates the importance of the safety factor
of the part. Therefore, when replacing, be sure to use parts of identical designation.
: The power supply is shown with the marked box.
A A 1/5- A 5/5
DVD MT PCB ASSY (A2G502A130)
A 1/5 : MPEG/MICON/RF-AMP BLOCK
A 2/5 : MEMORY BLOCK
C
A 3/5 : LOADER/MOTOR DRV BLOCK
A 4/5 : AUDIO/VIDEO JACK BLOCK J8001
CVBS
A 5/5 : POWER PORT BLOCK Y VIDEO OUT
(COMPOSITE)
U
V
J8002
Y
S VIDEO OUT
C
J8003
L
AUDIO OUT
R D
8 P. CON+3.3V(AT)
3 AT+12V for MUTE
J8004
069S2E0629
069J7C0599
P. CON+ 12V
P. CON+5V
P. CON+6V
FL DC +
FL DC
GND(M)
GND(D)
CP8001
AT+3.3V
AUDIO R
STBY L
AUDIO L
CP4003
RGB-H
28V
GND
CVBS
GND
GND
GND
GND
FS
G
R
B
10
11
12
13
14
10
11
12
1
2
4
5
6
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
10
11
12
9
9
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
12
11
10
9
1
2
3
4
5
6
7
8
9
8
7
6
5
4
3
2
1
10
11
12
13
14
12
11
10
9
1
2
AT+12V for MUTE 3
4
5
6
7
8
9
8
7
6
5
4
3
2
1
E
CP502
J8101
069J7C0599
P. CON+3.3V
P. CON+ 12V
CP503
P. CON+5V
P. CON+6V
AT+3.3V
FL DC +
FL DC
GND(M)
P. ON-H
GND(D)
28V
AUDIO R
AUDIO L
GND
GND
RGB-H
CVBS
R/CR
B/CB
GND
GND
GND
GND
G/Y
FS
SCART
F F 1/2, F 2/2
POWER PCB ASSY (A2G502A240)
F 1/2 : POWER BLOCK J501
LIVE 1
BLUE
F
F 2/2 : 21PIN/D/DIGITAL AUDIO BLOCK NEUTRAL 2
AC IN
BROWN
DV-2850-S 15
5 6 7 8
1 2 3 4
POWER_ON
ASPDIF
A
25V1 0 K A
10P C H
MPEG/MICON/RF-AMP BLOCK
C4048
11P C H
0 . 47 B
C4049
V1P4
22P C H
C4035
C4102
C4103
0. 1 B
0. 1 B
0. 1 B
(D)
C4034
V+3
R4022
100K
C4047
MMZ1608R102CT
C4050 0 . 1B B4007
C4045
390P CH X4001
C4046
V+3RF
B
100BT02701
R4001 1K
C4104 27MHz
C4041 0.1
C4043 0.1
R4024
C4033 1 B
R4025
0. 001 B 750K
FROM/TO LOADER/MOTOR DRV 100K
B
A{3}
0.03 B
W829
0.1 B
B
B
15K
B{3}
0.1
100
(RF)
TP4035
B
B
0. 1B
C{3}
C4028 0.1
C4101 0.1
C4042
C4044
C4026
C4105
1
D{3}
0.047
0.047
R4027
E{3}
R4020
C4027
C4031
C4032
F { 3}
MDI1 { 3}
LDO1 { 3} 256 255 254 253 252 251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222
OSP
LPFOP
(PD) ASDATA4
MC_DATA (PD)
LPFON
NC
NC
NC
ADCVSS
RFGND
CRTPLP
RFRPDC
XTALO
PLLVDD3
SPDIF
NC
NC
RFRPAC
PLLVSS
RFVDD3
HRFZC
IDACEXLP
RFVDD18
(3) DVSS
ADCVDD3
LDO2 { 3}
LPFIN
AGND
LPFIP
JITFO
XTALI
RFGND18
JITFN
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
V1P4 { 3} D (D) C4014 1B (D)
DVDA
DMSO{ 3} A (A) C4015 1B (A)
B (B) (B)
DVDB
A 3/5
FMSO { 3} B C4016 1B
TRCLOSE { 3} DVDC
C (C) C4017 1B (C)
TROPEN { 3} DVDD
PWMOUT1{ 3} RF (RF) C4080 1B (RF) 253 OSN
DVDRF[P
TRSO { 3}
NC DVDRF[N 254 RFGC
FOSO { 3}
TROUT { 3} MA
255 IREF
TRIN { 3} MB
STBY { 3}
V20 { 3}
1 MC 256 AVDD3
MD
LIMIT { 3}
IOA { 3} NC SA
DEICG { 3} NC SB
R F { 3} NC SC
O PO { 3}
NC SD
O P+ { 3}
O P- { 3} NC CDFON
D_GND{ 2, 3, 4, 5} NC CDFOP
E (E) (E)
TNI
F (F) (F)
TPI
MDI1
MIDI1
MIDI2
LDO2
LDO2
C FROM/TO MEMORY
LDO1
LDO1
C4013 0.1B
SVDD3
TP4010 CSO/RFOP
C4005
M A0 { 2} TP4011 RFLV/RFON
M A1 { 2} 0.1B
V20 SGND
M A2 { 2}
V1P4 C4019 0.1B
M A3 { 2} V2REFO
M A4 { 2} V20
M A5 { 2} IC4002
0.1B
C4007
VREFO
M A6 { 2} TP4012 MT1389FE/C2-L
M A7 { 2} FEO
TP4013
0.0022B
M A8 { 2} TEO
MPEG/MICON/RF-AMP
0.015B
C4009
R4003
R4026
C4008
C4020
C4091
680K
0.1B
10K
M A9 { 2} TEZIS[LV
MA10 { 2} OPO 0.1B
MA11 { 2} OP-
17 OP_OUT
SDCKE{ 2} OP_INN
OP+
SDCLK { 2} OP_INP
DBA0 { 2} DMSO R4015 10K
DMO
DBA1{ 2} FMSO R4016 15K
FMO
DCS#{ 2} TROPEN
DRAS# { 2} TROPENPWM
PWMOUT1 R4017 22K
DCAS# { 2} PWMOUT1/V_ADIN9
TRSO R4018 22K
DWE#{ 2} TRO
FOSO R4019 22K
D DQM0 { 2}
DQM1 { 2} C4001 0.0022B
FDO
V1P4 USB_VSS
DQ0 { 2}
NC NC
R4011
R4012
C4002 270P CH
10K
DQ1 { 2}
10K
DQ2 { 2} NC NC
C4012 0.1B
DQ3 { 2} C4003 150P CH USB_VDD3
DQ4 { 2} ADIN
FG/V_ADIN8 (PU)
DQ5 { 2} TROUT
TDI/V_ADIN4 (JTAG)
DQ6 { 2} TRIN
DQ7 { 2} TMS/V_ADIN5 (JTAG)
STBY R4002 10K
DQ8 { 2} TCK/V_ADIN6 (JTAG)
DQ9 { 2} TRCLOSE(ENDM)
TDO/V_ADIN7 (JTAG)
DQ10 { 2} C4021 0.1B
A 2/5
DVDD18
DQ11{ 2} A2 TP4001
DQ12 { 2} IOA2 (PU)
A3 TP4002
DQ13 { 2} IOA3 (PU)
A4 TP4003
DQ14 { 2} IOA4 (PU)
DQ15 { 2} A5 TP4004 65 APLLVSSVDD3
IOA5 (PU)
A 0 { 2} A6 TP4005
IOA6 (PU) 66 XIOWR
A 1 { 2} TP4006
A7
A 2 { 2} IDA7 (PU) 67 A16
A8 TP4007
A 3 { 2} HIGHA0 (PU)
TP4008 68 HIGHA7 (PU)
A 4 { 2} A18
IOA18 (PU)
IOA2/V_ADIN0
A 5 { 2} A19 TP4009
HIGHA6 (PU)
HIGHA5 (PU)
HIGHA4 (PU)
HIGHA3 (PU)
HIGHA2 (PU)
HIGHA1 (PU)
IOA19 (PU)
XIOCS (PU)
XUWR (PU)
UP1_2 (PU)
UP1_3 (PU)
IOCA1 (PU)
A 6 { 2}
E
XURD (PU)
DVSS (18)
I OA0 (PU)
ALE (PU)
DVSS (3)
A 7 { 2} DVSS
DVDD18
DVDD3
DVDD3
R4013 10K
XIODE
IOA20
A 8 { 2} SDA APLLCAP
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
A17
UWR#
URD#
TP4023
TP4024
TP4025
TP4026
TP4027
TP4028
TP4029
TP4030
TP4031
TP4032
A13 { 2}
3. 3V
TP4022
TP4033
TP4034
8 7 6 5
A14 { 2}
TP4015
TP4016
TP4017
TP4018
TP4019
TP4020
TP4021
SCL
WP
VCC
SDA
A15 { 2}
B
C4022
BR24L16FJ-WE2
A16 { 2}
0. 1
A17 { 2}
A18 { 2} EEPROM
A19 { 2}
GND
IC4001
NC
NC
NC
6. 3V 220 Y K
A20 { 2}
C4025
AD0 { 2}
C4030
0. 1 B
AD1 { 2} 1 2 3 4
0. 1
C4023
AD2 { 2}
AD3 { 2}
AD4 { 2}
TP4107
R4034
AD5 { 2}
R4035
PWR#
IOWR#
33
33
IOCE#
PRD#
PCE#
AD6 { 2}
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
A20
A16
A15
A14
A13
A12
A11
A10
A17
A9
A1
A0
AD7 { 2}
PWR# { 2}
PCE# { 2}
FP_SCK
TP4014
TP4096
F
FP_DI
PRD# { 2}
D_GND {2,3,4,5}
A 1/5
16 DV-2850-S
1 2 3 4
5 6 7 8
XAMUTE
CVBS
DAC_XCS0
R/CR
ASDAT0
SCK
B/CB
DEICG
ABCK
ALRCK
S_C
ACLK
SD
S_Y
V+3A
IOA
G/Y
A
(SC)
(SY)
(R/CR)
(B/CB)
(G/Y)
P4043T
TP4038
TP4039
TP4041
FROM/TOVIDEO/AUDIO
W834
TP4060 R4064 1 50 + - 1% VSEL1 {4}
R4065 1 50 + - 1%
TP4046
TP4047
TP4049
TP4050
TP4066 LETTER {4}
TP4061 R4066 1 50 + - 1%
R4046 1 0
R4047 3 3
R4050 3 3
SQUEEZE {4}
R4067 1 50 + - 1%
(DA)
TP4067
TP4062 R4068 1 50 + - 1% I/XP{4}
(R/CR)
TP4068 R4069 1 50 + - 1% R/CR {4}
(B/CB) B/CB {4}
W816 (G/Y)
G/Y {4}
C4060 0 . 1 B
V+3V CVBS {4}
33
R4052 1 0K
R4054 1 0K
(SC)
R4043
W832
W833
0. 1 B
C4053
C4061
S_C { 4}
0. 1 B
C4063
0. 1 B
W811 (SY)
S_Y { 4}
NC NCNC
R4061
W812
SD{4}
SCK {4}
A 4/5
221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 2. 7K+ - 1%
DAC_XCS0 {4}
DVDD18
DACVDDB
HSYN/V_ADIN2
SPLRCK
SPDATA
ABCK
DACVSSC
YUV3/CVBS
VSYN/V_ADIN1
(PD) ALRCK
YUT7/ASDATA5
DACVSSA
DACVSSB
(PD) ASDATA3
(PD) ASDATA2
(PD) ASDATA1
(PD) ASDATA0
R40621 5K
SPMCLK
ACLK
YUV4/G
SPBCK/ADTA5
129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192
DACVDDA
DVDD3
DVDD3
YUV6/R
YUV2/C
YUV5/B
YUV1/Y
(18) DVSS
100P C H
100P C H
DVDD18
C4116
C4110
V+1R8 {5}
NC NC V+3 {2,5}
NC NC V+3E {5}
RD29
TP4064
TP4093 I/XP V+3A {4,5}
FLDC- {5}
A 5/5 C
(PU) RD30
TP4065 FLDC+ {5}
(PU) RD3/ASDATA5 -28V {5}
C4068 0.1 B
DVDD3 D_GND {2,3,4,5}
TP4069 MA4
RA4
TP4070 MA5
RA5
TP4071 MA6
RA6
(18) DVSS
TP4072 MA7
RA7
(3)DVSS
TP4073 MA8
RA8
TP4074 MA9
RA9
TP4075 MA11
RA11
R4082 33 SDCKE
(RF) CKE
C4072
: RF SIGNAL ROUTE RCLK
SDCLK
DVDD3
0. 1 B R4005
: VIDEO SIGNAL ROUTE NC NC
C4073
(SY) NC NC 100
: S VIDEO SIGNAL ROUTE (Y ch) DVDD18
0. 1B TP4076
(SC) RA3
MA3
: S VIDEO SIGNAL ROUTE (C ch) RA2
TP4077 MA2 D
TP4078 MA1
(R/CR) RA1
: VIDEO SIGNAL ROUTE (R/CR ch) (3) DVSS
TP4079 MA0
(G/Y) RA0
TP4080 PP DEL
MA10
: VIDEO SIGNAL ROUTE (G/Y ch) RA10
R4070 33 TP4081 V+3(V+3D) TP4103
DBA1 V+3D
(B/CB) BA1
RXD TP4040
: VIDEO SIGNAL ROUTE (B/CB ch) (18) DVSS
TP4082
RXD
R4071 33 DBA0 TXD TP4042
(D) BA0 TXD
: AUDIO DATA SIGNAL ROUTE XRCS D_GND TP4106
GND
(DA) DVDD3 TP4083 DCS#
: AUDIO SIGNAL ROUTE (Digital) XRAS TP4084 DRAS# C4076 3 3P CH
XCAS TP4085 DCAS#
C4077 1 00P CH
TP4086 DWE#
XRWE
C4078 3 3P CH
125 RD0 DQM1 NR4002
126 RD15 DQS1
4D03WGJ0330T5E TP4087 DQM1 C4079 1 00P CH CP4002
00_6232_011_006_800+
TP4088 DQ8 FP_SCK TP4104
127 DVDD3 RD8 CLK 1
(3) DVSS FP_DI TP4105
128 RD14 DQ9 DI (Mto F) 2
RD9 STB TP4097
DQ10 STB 3
XPRST (PU)
RD10
UP1_4 (PU)
UP1_5 (PU)
UP1_6 (PU)
UP1_7 (PU)
UP3_0 (PU)
UP3_1 (PU)
UP3_4 (PU)
PU3_5 (PU)
XINT0 (PU)
DVSS (18)
DO(F to M) 4
DVDD18
RD11
ICE (PD)
DVDD3
DQM0
DQ12 IR
DQS0
RD12 TP4098 IR 5
RD7
RD6
RD5
RD4
RD3
RD2
RD1
DQ13
IR
RD13 V+3E
V+3E 6
C4114
100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 IC4003 TP4108 R4007
DGND 7
B 1
BD5229G-TR URST#
NC
TP4095
TP4051
TP4052
TP4053
TP4054
TP4055
TP4056
TP4057
TP4058
TP4059
1. 8V
3.3V
TP4044
33
R4084
CT V_OUT
1
FLDC+
5
TP4100
1K
FLDC+ 9
0. 0082
- 28V TP4101
B -28V 10
V+3E
VDD
2
FLDC-
R4051
TP4102 FLDC- 11
TP4094
C4074
0. 1 B
NC NC
B CP601
3
4
TP4045
VSS
220P C H
B
C4054
RESET IC
0. 1
C4064
0. 1
C4062
4D03WGJ0330T5E
R4036 33
NR4001
DQM0
DQ15
DQ14
DQ7
DQ6
DQ5
DQ4
DQ3
DQ2
DQ1
DQ0
FP_DO
URST#
V+1R8
F
LIMIT
V+3D
RXD
SDA
TXD
STB
SCL
V+3
IR
A 1/5
DV-2850-S 17
5 6 7 8
1 2 3 4
A
A 2/5 DVD MT PCB ASSY (A2G502A130)
MEMORY BLOCK
FROM/TOMPEG/MICON/DSP A17
DQ0 { 1}
DQ1 { 1}
DQ 2 { 1}
DQ 3 { 1}
DQ 4 { 1}
DQ 5 { 1}
B DQ 6 { 1}
DQ 7 { 1} A0
DQ 8 { 1}
DQ 9 { 1}
DQ10 { 1} AD7
DQ11 { 1}
DQ12 { 1}
DQ13 { 1}
DQ14 { 1}
DQ15 { 1}
M A 0 { 1} AD6
A 1/5 M A 1 { 1}
M A 2 { 1}
M A 3 { 1}
M A 4 { 1}
M A 5 { 1}
M A 6 { 1} AD5
M A 7 { 1}
M A 8 { 1}
C M A 9 { 1}
M A10 { 1}
M A11 { 1}
DWE# { 1} AD4
SDCKE { 1}
SDCLK { 1} C4081
DQM1 { 1}
DQM0 { 1} 0. 001 B
DCAS# { 1}
DRAS# { 1}
DBA1 { 1}
DBA0 { 1}
AD3
DCS#{ 1}
A0 { 1}
A1 { 1} AD2
D A2 { 1}
A3 { 1}
A4 { 1}
A5 { 1}
A6 { 1}
A7 { 1} AD1
A8 { 1}
A9 { 1}
A10 { 1}
A11 { 1}
A12 { 1}
A13 { 1} AD0
A14 { 1}
A15 { 1}
A16 { 1} PRD#
A 1/5 A17 { 1}
A18 { 1}
A19 { 1}
E A20 { 1}
AD0 { 1}
AD1 { 1} PCE#
AD2 { 1}
AD3 { 1}
AD4 { 1} A1
AD5 { 1}
AD6 { 1}
AD7 { 1}
PRD# { 1}
PCE# { 1}
PWR# { 1}
(V+3D)
V+3 { 1, 5}
D_GND {1,3,4,5}
A 2/5
18 DV-2850-S
1 2 3 4
5 6 7 8
64Mbit SDRAM
IC4005 K4S641632H-UC75
C 4088
54
VSS VCC
1
16Mbit FLASH 0. 1B
IC4004 S29AL016D
DQ15 DQ0 DQ7
53
1. 2 1. 7 DQ15
2
A16
48
A16 A15
52
3. 3 1. 0 VSSQ VCCQ
3
A15
47
BYTE# A14
2
DQ14 DQ6
51
0 0. 8 VQ14 DQ1
4
A14
46
VSS A13
3
DQ13 DQ2 DQ5 B
50
0. 7 1. 5 DQ13
5
A13
45
D15 A12 4
49
1. 9 2. 5 VCCQ VSSQ
6
A12
44
D7 A11
5
DQ12 DQ4
48
1. 3 1. 3 DQ12 DQ3
7
A11
43
D14 A10
6
NC
DQ11 DQ3
47
1. 2 1. 6 DQ11 DQ4
8
A10
42
D6 A9
7
46
0. 6 1. 5 VSSQ VDDQ
9
A9
41
D13 A8
8
NC
0 DQ10 DQ2
45
10
0. 7 A20 DQ10 DQ5
40
D5 A19
9
0 DQ9 DQ1
44
11
0. 8 DQ9 DQ6 C
39
10
NC D12 NC NC
12
43
1. 6 3. 3 PWR# VCCQ VSSQ
38
11
D4 WE#
0 DQ8 DQ0
42
13
3. 3 DQ8 DQ7
37
12
VCC RESET#
0. 1 41
14
1. 6 W820 VSS VCC
36
13
D11 NC NC C4082
NC
0. 1 DQM0
0. 1 B
15
40
1. 6 NC NC LDQM
35
14
D3 NC NC
0 DQM1 DWE#
39
16
1. 3 UDQM WE
34
15
D10 RY/BY# NC
NC
1. 6 SDCLK DCAS#
17
38
16
D2 A18
0. 7 SDCKE DRAS#
37
18
1. 4 A18 CKE ASR
17
32
NC D9 A17
1. 4 19
DCS#
36
1. 4 A8 NC NC CS
31
18
D1 A7
20
0. 9 A7 BA0
30
19
NC D8 A6
1. 6 MA9 DBA1
34
21
1. 6 A6 A9 BA1
29
20
D0 A5
1. 3 MA8 MA10
33
22
2. 6 A5 A8 A10/AP
28
21
OE# A4
1. 7 MA7 MA0
32
23
0 A4 A7 A0
27
22
VSS A3 E
2. 5 MA6 MA1
31
24
2. 6 A3 A6 A1
26
23
CE# A2
1. 6 MA5 MA2
30
25
2. 5 A2 A5 A2
25
24
A0 A1
MA4 MA3
29
26
A4 A3
R4087
10K
28
27
VSS VCC
6. 3V 1000 Y K
0.1 B
0.1 B
C4084
C4086
C4085
A 2/5
DV-2850-S 19
5 6 7 8
1 2 3 4
A
A 3/5 DVD MT PCB ASSY (A2G502A130)
LOADER/MOTOR DRV BLOCK
C2303 0 . 1B
IOA
V+5S
TP2301
DEICG
V+5S
CP2301 C2301 0 .1 B
09-5000-024-001-001
R2308
1 GND
(F) JG001 TP2304 (F)
10K
F
2 F
TP2305 V20
3 VS
4 VCC
(E) JG002 TP2306 (E) E
5 E D
(D) JG003 TP2307 (D) D G
R2307
6 D
(C) JG004 TP2308 (C) C Q2307 100K
7 C D 2SK3018T106 S
TP2309 IOA
8 SW1(DVD/CD) G
(RF) JG005 TP2302(RF) RF Q2306
B 9 VRF(RF_OUT) R2309
To PICKUP
C2325
0. 001 B
CP2302
00_6232_005_006_800+
CD2302
TP2320 LOAD-
5 LOAD-
TP2321 LOAD+
4 LOAD+
TP2322 TROUT
3 OPEN V+6A
2 GND
TP2323 TRIN
E
1 CLOSE
D C2323
0. 1 B OPO
R2342
0. 0022 B
680K
C2322
CP2303 OP-
00_6232_006_006_800+
OP+
CD2301
6 SW(GND)
TP2324 LIMIT
5 LIMIT SW
R2319
R2331
TP2325
150K
MOT_SLED-
150K
4 SLD-
TP2326 MOT_SLED+
3 SLD+
TP2327 2329R
2 SPD-
D
TP2328 MOT_SPDL+ 1
1 SPD+
R2338
MOT_SPDL-
10K
V+3F
E
TP2331
FG
C2314
1 B
A 3/5
20 DV-2850-S
1 2 3 4
5 6 7 8
(RF)
: RF SIGNAL ROUTE
A
FROM/TO MPEG/MICON/RF-AMP
(RF)
RF {1}
DEICG {1}
V20 {1}
(A)
A { 1}
(B)
B { 1}
JG010 RF33 (C)
C { 1}
TP2332 (D)
D { 1}
JG008 CD (E)
W819 V+3F E { 1}
TP2341 (F)
F { 1}
R2320
R2322
10V 100 Y K
4. 7
MDI1 {1}
C2320
4. 7
LDO2 {1}
3. 3 3. 3 LDO1 {1}
LD DRIV for CD D DRIV for CDL
Q2302 3. 3 Q2304 3. 3 LDO1 IOA {1}
KTA1504S_Y_RTK KTA1504S_Y_RTK V1P4 {1}
LIMIT {1}
A 1/5 B
0 0
TROUT {1}
TRIN {1}
STBY {1}
JG009 DVD DMSO {1}
W809 TP2342 Fv
R2321
R2323
10V 100 Y K
TRCLOSE {1}
4. 7
C2321
4. 7
TROPEN {1}
LD DRIV for DVD LD DRIV for DVD PWMOUT1 {1}
3.1 3.1
Q2303 2.5 Q2305 2.5 LDO2 TRSO {1}
KTA1504S_Y_RTK KTA1504S_Y_RTK FOSO {1}
2.0 2.0 OPO {1}
W817
Ov
OP- {1}
V+5S { 5}
V+9A
D_GND {1,2,4,5} A 5/5
M_GND {5}
FOCUS
TRACK
C2305
R2311
0. 1 B
TP2329
TP2330
10K
TP2333 STBY
15K + - 1%
R2318 56K + - 1%
R2310 R2325
TP2334 DMSO
R2312
R2317
2. 7K R2337 SPINDLE
15K + - 1%
10 K + - 1%
5. 6K 17
TP2339 V1P4
D
1. 4 10K + - 1%
1. 4 10K + - 1%
R2313
R2316
1. 4 R2326
R2327
4. 7K
4. 7K
NC
NC
NC
NC
NC
NC
4. 1
3. 3
3. 3
1. 4
1. 4
1. 4
0. 9
1. 6
1. 6
5. 9
1. 4
1. 1
1. 4
0
36 35 34 33 32 31 30 29 28 38 27 26 25 24 23 22 21 20 19
MOTOR DRIVE IC
REG-OUT
MUTE234
S-GND
MUTE1
VO_OP
VREF-OUT
VCONT
VIN+OP
VIN2+
VIN4-
VIN2-
VIN-OP
VREF-IN
REG-IN
VIN3-
VIN4
VIN3
VIN2
LA6565
VIN1+A
VIN1-A
VCCS
VIN 1
VCC2
VCC1
VLD+
VD4+
VD3+
VD2+
VD1+
FWD
VLD-
VD4-
VD3-
VD2-
VD1-
REV
IC2301
1 2 3 4 5 6 7 8 9 37 10 11 12 13 14 15 16 17 18
0
0
5. 9
0. 1
2. 6
2. 6
2. 6
2. 6
1. 5
3. 7
2. 6
2. 6
5. 9
5. 9
1. 4
1. 4
1. 4
15
10K + - 1%
TP2340
R2328
16
TP2335 PWMOUT1
C2306 10V1 00 Y K
R2330
TP2336 FMSO
C2307
C2312
1 B
C2313
10K + - 1% SLED
0. 01B
1 B
R2335
2. 2
R2334
C2311
0. 01B
2. 2
C2308
C2309
C2310
0. 1 B
0. 01B
TP2337
R2332
0. 1 B
R2333
1. 2
1. 2
F
TP2338
MOT_SPDL+
MOT_SLED+
MOT_SPDL-
MOT_SLED-
TRCLOSE
18
TROPEN
LOAD+
LOAD-
A 3/5
T+
F+
T-
F-
DV-2850-S 21
5 6 7 8
1 2 3 4
A
A 4/5 DVD MT PCB ASSY (A2G502A130)
AUDIO/VIDEO JACK BLOCK
SQUEEZE
CD8001
AUDIO_R
AUDIO_L
VSEL1
P-H/I-L_RGB-H
2H0C3001 CP8001
IMSA-9604S-12C
(G)
MMZ1608R102CT
MMZ1608R102CT
G/Y_OUT
FROM/TO MPEG/MICON/DSP G/Y 1
B8006
B8007
GND 2
DAC_XCS0 {1} (B) B/U_OUT
LETTER {1} B/CB 3
SQUEEZE {1}
GND 4
XAMUTE {1} (R) R/V_OUT
ACLK {1} R/CR 5
ASPDIF {1}
SCK {1}
(DA) RGB-H 6
F 1/2
A 1/5
SD {1} FS 7
VSEL1 {1}
I/XP {1}
CVBS 8 CP503
ABCK{1} GND 9
ASDAT0{1}
(D) : VIDEO SIGNAL ROUTE
B ALRCK{1} (SY)
AUDIO L 10
R/CR{1} (R/CR) GND 11
B/CB{1} (B/CB) : S VIDEO SIGNAL ROUTE (Y ch)
G/Y {1} (G/Y) (SC) AUDIO R 12
CVBS {1} : S VIDEO SIGNAL ROUTE (C ch)
S_C {1} (SC)
(SY) (R/CR)
S_Y {1}
: VIDEO SIGNAL ROUTE (R/CR ch)
(G/Y)
: VIDEO SIGNAL ROUTE (G/Y ch)
(B/CB)
: VIDEO SIGNAL ROUTE (B/CB ch)
(D)
: AUDIO DATA SIGNAL ROUTE
(DA)
: AUDIO SIGNAL ROUTE (Digital)
(G)
(R)
(B)
: AUDIO SIGNAL ROUTE (L ch)
FROM/TO POWER
C
D_GND {1,2,3,5}
A 5/5
V+12AT {5}
V+12 {5}
V+5V {5}
V+5A {5} CAUTION: DIGITAL TRANSISTOR CAUTION: DIGITAL TRANSISTOR
V+3A {1,5} ASP/FS
S_C_OUT (SC)
S_Y_OUT (SY)
CVBS_OUT
LETTER
SQUEEZE
V+5V 4CH BUS SW
IC8001
10V100 Y K
C8017
SN74CBT3257PWR
VIDEO DRIVER 6CH
B
IC8002
C8016
0. 1 B
16
IN VCC
1
MM1623BFBE C8008
0. 1
5.1 5.1 (Y)
28
D
15
Vcc1
14
0. 1B
5.1 2.5 (G/Y)
26
13
CR_OUT
CB_OUT
(SC)
Y_OUT
C8003 (CB)
CVBS 1.8 0
14
25
12
V in S1 S1B DD NC
4
1 B
5.1 0 (B) (CR)
24
11
MMZ1608R102CT 6. 3V 470 Y K
6. 3V 1000 Y K
6. 3V 1000 Y K
10
Y in V out DB S2C
6
1 B
C8023
C8024
C8026
C8022
C8014 0 0
9
22
10V100 Y K
VSEL1
(R/CR)
2.5 2.6
B8001
B8002
21
BIAS Y out
8
C8015
(SY) (G/Y) 13
0. 1 B 3.3 2.6
20
I/P CY out
9
E
C8002 (G/Y)
G/Y 1.8 0
10
10
19
CY in GND2
R8016
R8017
R8018
1. 2K
1.2K
1.2K
1 B
0 2.5
(B/CB) YUV only ---> W810,W821,W822 ON
11
18
75 + - 1%
75 + - 1%
75 + - 1%
C8004
R8027
R8029
R8028
B/CB 2.5 0
11
12
17
Cb i n GND2
0. 1B
5.1 2.5
(R/CR)
16
13
MUTE2 Cr out
Cr in GND2
0. 1 B
CVBS
12
CR
CB
H2 H1 H2 H1
3 2 6 5
1 4
E E
F
P-H/I-L_RGB-H
0. 1 B
C8010
I/XP
J8001
VSEL1
MSP-244V10-95_NI_FE_LF
A 4/5
CVBS/Y/U/V
22 DV-2850-S
1 2 3 4
5 6 7 8
V+12AT
ALRCK
DAC_XCS0
ASDAT0
XAMUTE
ABCK
ASPDIF
SCK
ACLK
SD
V+5A
V+3A
V+5V
3
(D)
(DA)
R8070 B8003
33 MMZ1608R102CT
R8051
R8014
IC8004
3.9K
3.9K
4 7 PCM1742KEG/2K
5 6
16
BCKIN
1
MCLK
(D)
B
15
DATA ML
2
R8035 (DA)
MMZ1608R102CT
14
2.2K LRCKIM MC
3
B8004
13
KTA1504S_Y_RTK C8068 GND MD
4
C8036
R8046
1 B 0. 1 B
2. 2K
12
VDD ZERO L NC
5
MUTE CTL R8065
J8004 Q8013
1. 8K
COAXIAL
5V
R8037
DTC114YUA 10
11
MSP-251V-05NI-FE-LF ZERO R
6
VCC
(DA)
H
W824
COAXIAL DRIV
2
MUTE CTL
10
VCOM
7
Q8005 Q8010 V-OUT L
0.1 B
KTC3875S_Y_RTK DTC114YUA
(DA)
10V 100 Y K
R8044
C8076
V-OUT R AGND
9
0. 1 B
R8039 C8038
R8036
C8063
3. 9K
C8075
R8056
10K
4. 7K
68 50V 1 K A C8074
6. 3V1000 Y K
C8061
100PCH
C8042
R8040
R8038
330P CH
100K
220
(SC)
(SY)
R8021
10K
R8067
D
18K +-1%
R8082 2 20 + - 1%
R8060 AUDIO_L
270K
C8053 R8059 R8066 C8069 C8073 R8083
2SD2114K
10V 100 Y K 10K + - 1% 10K 100P C H 16V 47 Y K 470
C8051 Q8021
R8049 +- 1%
R8080 R8085 MUTE SW
10V 100 Y K 10K + - 1%
R8048 220 + - 1% 220 + - 1%
330P C H
R8073
C8077
270K 2SD2114K
22K
560P C H
0. 1 B
C8021
C8025
470
C8056
4 3 2 1
0. 1 B
C8058
Q8019 MUTE SW
-VS
330P C H
R8074
- 2SD2114K
R8078
BA4560F-E2
75 + - 1%
C8078
75 + - 1%
+
22K
W866 GND
E
R8026
R8023
470
IC8003
+
-
+VS
R8079 R8084
C8059
0. 1 B
5 6 7 8
C8057
560P C H
220 + - 1% 220 + - 1%
6.3 6.3 6.3 12.5 MUTE SW
R8076
Q8020
2SD2114K
470
R8061 C8067 C8070 R8077
AUDIO_R
(SC)
(SY)
R8063 1 8K + - 1% C8072
C100PH
4 3
C8046
C
D8007 R8057 0. 1 B
REF VOL GEN L R
2 1
Q8016
1SS355 100
KTC3875S_Y_RTK 3
H2 H1
2 J8003
12. 5 W870 MSP-242V2-01NI-FE_LF
6 5 L/R
6. 3 1
R8054
2. 2K
E
6. 8
F
10V 100 Y K
R8069
C8066
680K
UDZS6.8B
C8062
J8002
D8005
1B
MDC-070V-B_LF
VSEL1
V+12
Y/C SEPA
A 4/5
DV-2850-S 23
5 6 7 8
1 2 3 4
A
A 5/5 DVD MT PCB ASSY (A2G502A130)
POWER PORT BLOCK
IC4006
SIP1117L-ADJ-TP
C
REG+1.8V IC
R4037 R4039
6. 3V 47 K A
C4094
15 68 + - 1%
1 B
1 B
0. 1 B
C4095
C4039
C4093
C4096
16V 1 B
1B
C4040
D 39 + - 1%
R4044
CP4003
A2001WV2-14P
1 GND
2 P.CON+12V
3 AT+12V for MUTE
4 GND
CP502
C4112
0. 001 B
5 P.CON+5V
C4109
6 P.CON+6V
0. 1 B
7 GND(M)
F 1/2
8 P.CON+3.3V(AT)
9 AT+3.3V
10 STBY L
E 11 GND(D)
12 FL DC-
13 FL DC+
14 -28V
A 5/5
24 DV-2850-S
1 2 3 4
5 6 7 8
FROM/TO AUDIO/VIDEO
B
V+3A {1,4}
W847 V+5A (AUDIO DAC)
V+5A {4}
W848 V+5V (VIDEO/OPT/COAX)
V+5V {4}
V+12AT(AUDIO MUTE)
V+12AT {4} A 4/5
B4002 V+12 (AUDIO AMP)
V+12 {4}
MMZ1608R102CT V+6A (MOTOR)
D_GND {1,2,3,4}
B4001 V+5S (OPU)
MMZ1608R102CT FROM/TO LOADER/MOTOR DRV
V+6A {3}
V+5S {3}
V+3F (F/E) C
V+3F {3}
A 3/5
D_GND {1,2,3,4}
FROM/TO MPEG/MICON/RF-AMP
W851 V+3 (MPEG/SDRAM/FLASH)
V+3 {1,2}
V+3E (FIP/LED/IR/RESET)
V+3E {1}
V+1R8 (CORE)
V+1R8 {1}
W852
V+3A {1,4}
0.001 B
6. 3V 220 Y K
C4100
C4098
POWER_ON {1}
D
10K
FLDC+ {1}
0. 01B
C4052
-28V {1}
R4033
D_GND {1,2,3,4}
A 5/5
DV-2850-S 25
5 6 7 8
1 2 3 4
A B
OPERATION PCB ASSY
(A2G501A270)
OPERATION PCB ASSY
SW652 : DOWN
SW653 : ENTER
SW654 : RIGHT
SW655 : RETURN
SW656 : MENU
B SW657 : UP D652 1SS133
1SS133
D651
D655 1SS133
SW658 : TOPMENU
1SS133
D654
D657 1SS133
SW659 : LEFT
1SS133
D656
C609 0.001 B
1SS133
SW661 : HOMEMNU
D658
C
DOWN ENTER
OPERATION 2 PCB ASSY SW652 SW653
EVQ11L05R
EVQ11L05R EVQ11L05R
PAUSE
SW663
SW665
PLAY
SW2 5
SW665 : PAUSE HOMEMENU
SW661
P5
EVQ11L05R
EVQ11L05R
EVQ11L05R
P4
SW660
SW662
SW664
STOP
+SKIP
-SKIP
EVQ11L05R
P3
PCB280 CURSOR KEY ONLY
DEE038
P2
P1
G OPERATION
EJECT
3 PCB ASSY SW666
SW1 5
STOP 4
PLAY/+SKIP 3
PAUSE/-SKIP 2
FFC(1.0mm pitch)
SW2 1
CD602
PCBDF0
2H092801
DEE039
SW2 SW1
CP603 (CP602) CP602 (CP603)
00_6232_009_102_800+ 00_6232_009_102_800+
V+3E 3 7 V+3E
C674
0.1
1/4W
47
GND 2 8 GND
IR
IR 1 9 IR
6.3V
B C G
26 DV-2850-S
1 2 3 4
5 6 7 8
V651 HNV-08SS44T
A
DVD
FL+
FL+
CD TRACK ALL REPEAT A B
P16
P15
P14
P13
P12
P11
P10
G8
G7
G6
G5
G4
G3
G2
G1
FL-
FL-
P9
P8
P7
P6
P5
P4
P3
P2
P1
32 31 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 2 1
-19.7
-19.7
-26.8
-22.7
-22.7
-20.5
-26.8
-26.8
-22.7
-20.5
-20.5
-22.7
-20.5
-20.5
-26.8
-26.8
-26.8
-20.5
-25.1
-25.1
-25.1
-25.1
-25.1
-25.1
-25.1
-25.1
-22.3
-22.3
FLDC-
W805 FLDC+
B
TP662
D659 1SS133
GR8
GR7
GR6
GR5
GR4
GR3
GR2
GR1
P16
P15
P14
P13
P12
P11
P10
P9
P8
P7
P6
P5
P4
P3
P2
P1
1SS133
D667
MS1_0
-28V
10K
10K
B
1K
1K
B
C658
0.1
0.1
R655
P10
P11
P12
P13
P14
P15
P16
R657
R656
R658
P8
P9
C676
-6.0 -13.0 -12.6 -9.5 -13.0 -9.5 -19.0 -19.0 -15.6 5.1 0
22 21 20 19 18 17 16 15 14 13 12
P8
P9
P10
P11
P12
P13
P14
P15
P16
VDD
-12.0 0
11
23
K2
-6.0 0
23 P7
10
24
P6 12 GND K1
-18.0 3.2 STB
25
P5 STB
R651
-18.0 3.4 2.2 FP_SCK
26
P4 CLK
R652
-18.0 IC651 0.7 2.2 B651
FP_DI
27
P3 DI
PT6315
MMZ1608R102CT
-18.0 3.2 FP_DO
FIP DRIVER IC
28
P2 DO
R654
-18.0 2.9 2.2 R662
29
P1 OSC
5
100K
-18.0
D
30
-28V NC 0
4
LED4
-18.0
0 B651 for M2G5_0107/M2G4
31
NC GR12 LED3
3
NC
-18.0
32
34 GR9
-18.0
0
33
VDD
GR8
GR7
GR6
GR5
GR4
GR3
GR2
GR1
NC GR11 LED1
1
NC
34 35 36 37 38 39 40 41 42 43 44
NC
-18.0 -18.0 -18.0 -16.0 -16.0 -16.0 -16.0 -16.0 -16.0 5.0 0
FROM/TO MPEG/MICON/RF-AMP
GR8
GR7
GR6
GR5
GR4
GR3
GR2
GR1
CP601 (CP4002)
00_6232_011_102_800+
FP_SCK
CLK 1
FP_DI
DI (M to F) 2 FFC
STB (1.0mm pitch)
STB 3
FP_DO
DO (F to M) 4 CD601
V+3E IR
IR 5 2H0B1201
V+3E
V+3E 6
E
B
C604
CP4002
DGND 7
C675
C605
A 1/5
33P CH
0.1
DGND 8
FLDC+ 0.001 B
FLDC+ 9
-28V
-28V 10
FLDC-
FLDC- 11
GND
A
F 1/2 POWER PCB ASSY (A2G502A240)
POWER BLOCK
KX
250V 0.0022
C516
B D505
1N4005-EIC
D502
400V 0.01CQP
1N4005-EIC
1.5M 1 /2W
100K1/2W
400V 82 U P
R512_1
C515_1
R503
C511
CQUL
SL
D503
E
RGP10KE
2 YKE31-0148N
C513
2KV 47P
D509
51MS016L 3 4 16
1N4005-EIC
J501
F501
C502_2
20.2275V
T1.6A_L_250V 1 2
2 15
BLUE D506
1
L L501 1N4005-EIC 3 14
BROWN SS11V-03550-CH
FH501 FH502
2
C
1
N EYF-52BCY EYF-52BCY
4 13
AC230-240V_50Hz
1.6A 250V
W4BRH3.5X6X1.0X2
12
B501 6 11
7 10
8 9
10ERB20-TA1B2
81291294
T501
D511
D
8 7 6 5
IC502
FB/OLP STARTUP
NC
D
D
STR-A6151M
GND
OCP
VCC
1 2 3 4
C514
500V 470PB
PHOTO
D513 R505
COUPLER
2KV 100P R
10ERB20-TA1B2 22 1 / 4W
C505
R507 IC504
PS2561AL1-1-V(W)
50V 2.2 KA MTZJ5.6B
10 1 / 4W 16.4 3.4
D508
1
4
1.8 1W
680P C H
E 0.1 2.3
50V 10 Y K
2
C508
C509
R502
R515
C506
R504
80K
6
C518 1K
0.001 KX
F 1/2
28 DV-2850-S
1 2 3 4
5 6 7 8
1 / 4W
REG P.CON+12V SW
6V REG
R524
R541
(DVD MOTOR)
+-1%
1K
1K + - 1% 5. 6K
W817 IN OUT GND
R542
1 2 3 4
D512
RGP15J
Q509 Q511 R545 R546
KTC3875S_Y_RTK
YK
YK
4. 7K + - 1%
YK KTC3875S_Y_RTK 22K + - 1% 3. 3K +-1% M
R509
C523_1
C531
C535
16V 100
16V 330
D534
R543
1K
25V 470
P.CON SW
680 1/4W
6. 8K + - 1%
R540
1SS133 Q505 B
MTZJ4.3B
R526
D517
KRC102SRTK
C501
W814
0.01 F
D532 R525 R519
Q515
2SD1207 11EQS04N 150 1/4W 1K
D510 REG P.CON 5V SW
W821
FROM/TOMPEG/MICON
RGP15J L503
CP502
C32E3502
22uH T SL0808 GND
R547 GN D 1
6. 3V 220 Y K
22 YK P.CON+12V 2
16V 1000 FM
C521_1
C536
YK
AT+12V forMUTE 3
A 5/5 CP4003
C538
6.3V 220
C527
GND 4
100
P.CON+5V 5
10V
P.CON+6V 6
GND(M) 7
C507 C533
P.CON+3.3V 8 C
FM
6. 3V 220 Y K
YK
6.3V 1000
P.ON-H 10
D528
C522_1
C526
C520
GND(D) 11
50V 100
C541
FL DC- 12
D527 W815 L505
0. 01 F FL DC+ 13
Q502KTC3209_Y
21DQ04N 22uH -28V 14
-28V P.CON SW
D519 R511 R529
3.4 3.3
1/4W
C528
R528
50V
22K
3.9
R510_1 R531
3.3 1W 10K
D515
Q503
KTA1504S_Y_RTK Q504 FROM/TO21PIN/D/DIGITAL
D
MTZJ5.1B
25V 220 YK
MTZJ3.0B
KTA1281_Y
11EQS04N
D535
P.CON+D5V
C517
D536
FL+ P.CON SW
AT+3.3V{2}
560 1/4W
P.CON+12V{2}
R530
DAC_C[B]U_VIDEO
B / CB 10
R516
C540
G ND 9
10
DAC_B[R]V_VIDEO
0.01 B R / CR 8
1SS133
1SS133
1SS133
D520
D521
D522
A 4/5
4.7K 1/4W
1/4W FS 6
10K 0.1 B
CP8001
R539
21PIN_CVBS_VIDEO
CAUTION:DIGITALTRANSISTOR CVBS 5
R517
IC501KIA431A-AT
GND 4
AMP_A_OUT_L
AUDIO L 3
R506
100
VOLTAGE AMP_A_OUT_R
GND 2
3. 3K + - 1%
AUDIO R 1
CTL
22K
Q506
OUT GND IN
R538
KTA1504S_Y_RTK CAUTION:DIGITALTRANSISTOR
3 2 1
2.2 0 2.5 R527 NOTE : THE DC VOLTAGE EACH PART WAS
Q501 MEASURED WITH THE DIGITAL TESTER F
35V 22 Y K
100 1/4W
MTZJ3.6B
KTC3875S_Y_RTK
DURING PLAYBACK.
R523
C519
D523
22K
F 1/2
DV-2850-S 29
5 6 7 8
1 2 3 4
A
F 2/2 POWER PCB ASSY (A2G502A240)
21PIN/D/DIGTAL AUDIO BLOCK
FROM/TOPOWER
AT+3.3V {1}
R8120
P.CON+12V{1}
1 1/4W
P-H/I-L_RGB-H{1}
C ASP/FS{1}
AMP_A_OUT_R {1}
A_GND{1}
D
C8105
0.1B
470 1/4W
R8103
R8104
6.8K
Q8101 Q8102
R8105 21PIN CTL DRV
21PIN CTL IN
KTA1504S_Y_RTK
KTC3875S_Y_RTK 390 1/4W
R8101
1SS355
D8101
E 4.7K 1/4W
R 8108
8.2K
0.001 B
C8106
0. 01 B
56K
R8102
C8101
F 2/2
30 DV-2850-S
1 2 3 4
5 6 7 8
J8101
MRC-021V-07_A
R8114
21PIN_R
1
220 + - 1%
NC
2
R8115
21PIN_L
3
220 + - 1%
0. 001 B
0. 001 B
4
C8107
C8111
5
NC
6
(B)
7
L8101
21PIN_CTL C
8
10uH 0 305
10
C8112 NC
(G) R8110 (G) (G)
21PIN/D_G/Y_OUT
11
6.3V 1000 Y K 75 + - 1%
12
C8113 NC
(B) R8111 (B)
21PIN/D_B/U_OUT
13
6.3V 470 Y K 75 + - 1%
14
C8114 R8112 (R)
(R) 21PIN/D_R/V_OUT (R)
15
6.3V 470 Y K 75 + - 1% BLANKING_OUT
16
17
8
18
C8115 Rv
21PIN_CVBS_OUT
19
33PC H
C8116
6.3V 1000 Y K 75 + - 1%
D
20
NC
21
3 .3 DVD_RGB_H_OUT
Q8105
0 DTA114EKA
3.2
0
3.2 R8109
DVD_RGB_H_OUT
Q8104
68 + - 1%
0 DTC144EKA
E
F 2/2
DV-2850-S 31
5 6 7 8
1 2 3 4
3.11 WAVEFORMS
Note : The encircled numbers denote measuring point in the schematic diagram.
A
Measurement condition : No. 1 to 2 and 9 to 14 : reference A1 (DVD), T2-chp 19, Color-bar
No. 3 to 8 : reference A1 (DVD), T2-chp 1
GND
32 DV-2850-S
1 2 3 4
5 6 7 8
15 15
16 16
PLAY
CN2303 - pin 1
18 (IC2301 - pin 11)
[MOT_SPDL+]
D
V: 2V/div. H: 2msec/div. E
DV-2850-S 33
5 6 7 8
1 2 3 4
34 DV-2850-S
1 2 3 4
5 6 7 8
B C E B C E SIDE A
Transistor
B C E with resistor
D G S D G S B
Field effect
D G S transistor
P.C.Board Chip Part SIDE B
Resistor array
3-terminal
regulator
C
E LOADING MOTOR E LOADING MOTOR
PCB ASSY PCB ASSY
(INSERTED PARTS) (CHIP MOUNTED PARTS)
SIDE A SIDE B
SW1
CD2302
A CP2302
CD2301
M2602
SLED
MOTOR
CD2301
F
M2601
SPINDLE
A CP2303
D E MOTOR
D E
DV-2850-S 35
5 6 7 8
4 3 2 1
DV-2850-S 36
Q2304 Q2305 IC4005 IC4002
Q2303 Q2301 IC4004
A
Q2307 Q2306 Q2303 Q2302 IC2301
F
C4085 C4088
IC4005
C4084
C4086
IC4003
C4082
R4084
R4082
R4005
C4090
C4022
NR4002 R4007
C4074
IC4001
C4071
E
B4007
R4070
R4071
C4073
C4068
C4072
C4076
C4054 C4077
R4051
C4064
2
129 R4013
00
R4014
C4079 C4114
C4078
R4035
CP4
NR4001
C4062
R4036
CP4002
R4034
B CP601
C4081
IC4002
IC4004 D
C4030
65
C4025
C4024
R4087
C4013
C4012
C4020
C4021 W820
R4002
C4019
C4017
C4023
C4091
R4003
2
C2325 R4026
230
C2323
CP
C2322
CP2302
R4012
R4011
R4018 R4019
R4015
R4016
C2312 R2342
C4001 R4017
E CD2302
C4005
R2328 C2313 R2331
C2307
R2319
C
R2330
C4007
C2314 R2329
C4009
C4008
C4080
W851
W852
C2309
IC2301
C2321
C2306
R2332
R2337 R2333
W819
C2320
853
R2313 R2311
C4096 R2322
R2312
C2310
R2327
R2326
R2309
R2318
Q2305 R2310 C2308
C4002
C4095
R2317 R2316
Q2301 R2325 C2305
R2334
C4003
R2321 R2323
C4094
Q2303
R2338
W850
Q2302 CP2303
R2308
R2335 B
R2306
R2307
W809
Q2306 Q2307
C2302 C2303 C2301
39
CP2301
CP2301 CP2303
DVD MT PCB ASSY A
PICKUP D CD2301 SIDE A A
4.2 DVD MT PCB ASSY
4 3 2 1
B
F
C
D
A
37
SIDE A
A
8
8
J8002
J8003 J8001 J8004
R8035
R8021
C8021
W866
R8026
R8029
R8028
R8027
R8085
R8083
R8024
B8004
Q8018-Q8021
R8037
B8002
Q8005
R8017 W824
C8036
R8078 R8076 R8016 R8023 Q8005
Q8018
B8001
R8079
Q8020
R8018
Q8019
R8080
C8038
Q8021 C8024
R8081
R8074 R8077 C8025 C8010
R8082 R8073 C8023
7
7
F CP503
C8070
B8007
CP8001
Q8014
R8056 C8073
Q8014
C8022
Q8013 D8005
Q8013
R8060
C8026
CP800
C8072
R8051
R8067
R8063
C8067
DV-2850-S
R8014
C8069
B8006
IC8003
IC8003
R8059
C4110
C4116
R8069 R8066 R8061 C8057
C8016
C8062
C8015
R8054
R8049
R8048
C8058 C8059
Q8016
Q8016 C8053 C8056
IC8002
W870
C8017
C8046
IC8002
C8051
C8014
R8057
D8007
C8063
C8008
C8066
IC8001
C8002
IC8004
C8003
C8006
C8004
C8005
IC8001
C8001
6
6
IC8004
C8075 R8065
C8061
C8068
R8044
C8076 C8074
Q8010
R8070
Q8010
B8003
R4046
R4047
R4043
R8046
C4105
R4067 W812
R4064
B4002
C4103
R4024
X4001
W811 R4068
C4046 R4066
R4050
W815
R4065
R4069
W813 W814
C4047
W816
C4102 C4104 W832
C4040
C4034
R4054
R4022
C4048 C4049
C4045
C4044
R4025 W833
C4042
R4001
W847
W829 C4050
R4052 C4060
R4027
W848 C4043
C4093
C4061
C4033 C4041
F CP502
C4063
C4053
C4052
CP4003
5
C4112
R4037 R4039
R4062
C4066
5
C4031 C4028
R4061
R4033 C4100
C4109
R4020
C4027
C4014
B4001
IC4006
C4101
C4026
IC4006
R4044 C4015 C4067
193
C4039
1
W853
C4016
C4071
C4096
W852 C4017
C4094
W850
C4085
W851 B4007
C2302
C4095
C4013
C4068
6 Q2303
C2303
C4019
IC4002
Q2301
C4080
Q2301
C4002
R2309 R4082
R2308 C4020
C4005 C4072 R4005
I
1 2 3 4
SIDE B
A
CP8001 CP4003
A
38 DV-2850-S
1 2 3 4
5 6 7 8
SIDE B
A
CP2301 CP2303 A DVD MT PCB ASSY
CP2302
D
CP4002
A
DV-2850-S 39
5 6 7 8
1 2 3 4
SIDE A
A G OPERATION 3 PCB ASSY
N
CP603
2 8 3 DEE0
POWER DIP
9
B SW667
CP603
B CP602
W001
10 2
SW655 HOMEMENU
SW653
LEFT
RIGHT
ENTER
W004
SW654 SW659 TOPMENU
SW657
W002
W003
MENU
NTSC
D
SW656 SW658
UP
1
CP601
A CP400
SW664 SW662
- SKIP
5
DEE038A 3
+ SKIP
CP605
CP605
F
G CP604
B C G
40 DV-2850-S
1 2 3 4
5 6 7 8
SIDE A
A
NTSC C674
OS651
3 DEE039A 2
R666 4
5
CP604
B
CP604
C CP605
DEE028A 3 9
CP601 C
CP602
W007
W008
2
W005
W006
8
2 D651
D652
D654
EJECT
W004
D655 W805
D667
D656
SW666
D657
D658 D
D659
1 5 28 32
V651
CP601 CP602
A CP4002 G CP603
3 NTSC
STOP PAUSE
B C G
DV-2850-S 41
5 6 7 8
1 2 3 4
SIDE B
A G OPERATION 3 PCB ASSY
C651
B
CP604
R658
R655 R656
R654
R662
C675
C609
R657
R651
R652
B651
1
IC
65
12 1
34
C676
23
D
CP602
B C G
42 DV-2850-S
1 2 3 4
5 6 7 8
SIDE B
A
B
CP603
C
C604
C605
C658
IC651
CP601
CP605
F
B C G
DV-2850-S 43
5 6 7 8
A CP4003
A CP8001
POWER PCB ASSY
CP502
C8114
CP503
4
4
W016 D533
W011
13 C528
W035 W017 D535
D536
R529
C8113 R528
Q504
CP502
W006
W005
R530
Q502 E
03
Q502
11
CP5 2
E
Q504
W018
W019
L8101 D531 DIP
D523
C533 C520
12
D525 R539
W032
W031
W030
J8101
C8112
L505
C519
W004
1
R51
W815
D528
R8101 C517
R8105
R8103
0_1
C526
W024
R51
C522_1
D519
C521_1 R534
IC501
3
D515
W025 1
R8120
W036 W001 DPE004A
F
W811
3
3
D527 IC501 3
C8115 W027 W023 D510 W002
W003
D522 NTSC/PAL
C535
C527
D520
Q515
D532
D512 D521
E T501
W015 D516
DV-2850-S
W013
Q515 R517
W029 C536
W026
R525 C540
W021 R513
R514
R527
D517 W821
C523_1
R524
POWER
4
C538
IC508
R505
D513
L503 C509
DANGER!
W007
W817 MAINS\
D534
R546 C514 2
W010 1
\VOLTAGE
Q510
C506
2
2
R502
1
C531
IC504
IC503
E
SECONDARY W012 Q510
4 1
D508
C5
3
R542 4
05
50
W008
4
IC502
4.4 POWER PCB ASSY
R540 IC
W814
IC502
PRIMARY
D509
D505 5 8
B501
R507
C502_2
C513
J501 D511
R512_1
N
C515_1
F501
WHITE FH501 FH502 D502
D506
R503
AC IN
J501
L501
C518
D503 C511
220-240V:
1
1
BLACK T AL V
SIDE A L
C5
16
F
44
C
D
A
F
CP502
F
5
5
C8107
C8111
CP503 R8112
R8114
C507
R8115
R537 Q503
R8111
R531
C541
R8102
R8108
R536
Q513 Q512
R544 D8101
Q8102
R8110
C8105
C8116
Q8101
C8101
R8104
R8113
R518
6
6
R8109
Q8105
Q8104
C8106
R519
R547
R516
R538
R506
Q506
C503
Q501
DV-2850-S
R515
Q505
R523
C501
Q509 R509
R526
R545
7
7
R541
R543
C508
R504
Q511
8
8
F
SIDE B
45
E
A
D
C
F
B
1 2 3 4
Mark No. Description Part No. Mark No. Description Part No.
B
LIST OF ASSEMBLIES
CAPACITORS
1..DVD MT PCB ASSY A2G502A130
C2301 CC 0.1 UF 25V B CS0PB0315K
C2302 CC 0.1 UF 25V B CS0PB0315K
1..OPERATION PCB ASSY A2G501A270
C2303 CC 0.1 UF 25V B CS0PB0315K
C2305 CC 0.1 UF 25V B CS0PB0315K
1..OPERATION 2 PCB ASSY A2G501A280
C2306 CE 100 UF 10V E02LU1101M
1..OPERATION 3 PCB ASSY A2G501ADF0
C2307 CC 1 UF 10V B CS0PB0N16K
C2308 CC 0.1 UF 25V B CS0PB0315K
1..POWER PCB ASSSY A2G502A240
C2309 CC 0.1 UF 25V B CS0PB0315K
C2310 CC 0.01 UF 50V B CS0PB0414K
NSP 1..DVD MECHA ASSY A2F101A650
C C2311 CC 0.01 UF 50V B CS0PB0414K
2..LOADING PCB ASSY A2F101A610
2..SW PCB ASSY A2F101A640
C2312 CC 1 UF 10V B CS0PB0N16K
C2313 CC 0.01 UF 50V B CS0PB0414K
Mark No. Description Part No. C2314 CC 1 UF 10V B CS0PB0N16K
C2320 CE 100 UF 10V E02LU1101M
DV-2850-S 47
5 6 7 8
1 2 3 4
Mark No. Description Part No. Mark No. Description Part No.
R4011 RC 10K OHM 1/16W R803R9103J R8046 RC 2.2K OHM 1/16W R803R9222J
R4012 RC 10K OHM 1/16W R803R9103J R8048 RC 270K OHM 1/16W R803R9274J
R4013 RC 10K OHM 1/16W R803R9103J R8049 RC 10K OHM 1/16W R803R9103F
R4014 RC 10K OHM 1/16W R803R9103J R8051 RC 3.9K OHM 1/16W R803R9392J
C R4015 RC 10K OHM 1/16W R803R9103J R8054 RC 2.2K OHM 1/16W R803R9222J
R4016 RC 15K OHM 1/16W R803R9153J R8056 RC 4.7K OHM 1/16W R803R9472J
R4017 RC 22K OHM 1/16W R803R9223J R8057 RC 100 OHM 1/16W R803R9101J
R4018 RC 22K OHM 1/16W R803R9223J R8059 RC 10K OHM 1/16W R803R9103F
R4019 RC 22K OHM 1/16W R803R9223J R8060 RC 270K OHM 1/16W R803R9274J
R4020 RC 15K OHM 1/16W R803R9153J R8061 RC 10K OHM 1/16W R803R9103F
R4022 RC 100K OHM 1/16W R803R9104J R8063 RC 18K OHM 1/16W R803R9183F
R4024 RC 750K OHM 1/16W R803R9754J R8065 RC 10 OHM 1/16W R803R9100J
R4025 RC 100K OHM 1/16W R803R9104J R8066 RC 10K OHM 1/16W R803R9103F
R4026 RC 10K OHM 1/16W R803R9103J R8067 RC 18K OHM 1/16W R803R9183F
R4027 RC 100 OHM 1/16W R803R9101J R8069 RC 680K OHM 1/16W R803R9684J
D
R4033 RC 10K OHM 1/16W R803R9103J R8070 RC 33 OHM 1/16W R803R9330J
R4034 RC 33 OHM 1/16W R803R9330J R8073 RC 22K OHM 1/16W R803R9223J
R4035 RC 33 OHM 1/16W R803R9330J R8074 RC 22K OHM 1/16W R803R9223J
R4036 RC 33 OHM 1/16W R803R9330J R8076 RC 470 OHM 1/16W R803R9471J
R4037 RC 15 OHM 1/16W R803R9150J R8077 RC 220 OHM 1/16W R803R9221F
E
R4050 RC 33 OHM 1/16W R803R9330J R8083 RC 470 OHM 1/16W R803R9471J
R4051 RC 33 OHM 1/16W R803R9330J R8084 RC 220 OHM 1/16W R803R9221F
R4052 RC 10K OHM 1/16W R803R9103J R8085 RC 220 OHM 1/16W R803R9221F
R4054 RC 10K OHM 1/16W R803R9103J W13809 RC 0 OHM 1/16W R803R9000J
R4061 RC 2.7K OHM 1/16W R803R9272F W13811 RC 0 OHM 1/16W R803R9000J
DV-2850-S 49
5 6 7 8
1 2 3 4
Mark No. Description Part No. Mark No. Description Part No.
IC503 IC PQ070XF01SZH I0GA9XF010 C506 CE 2.2 UF 50V E50HU52R2M
IC504 PS2561AL1-1-V(W) 000220002W
Q501 KTC3875S_Y_RTK TCAA3875SY C507 CC 0.01 UF 50V F CS0PF0414Z
A C508 CC 680 PF 50V CH CS0PCH4U2J
Q502 KTC3209_Y_AT TCAT03209Y C509 CE 10 UF 50V E02LU5100M
Q503 KTA1504S_Y_RTK TAAA1504SY C511 CE 82 UF 400V E51CHH820M
Q504 KTA1281_Y TAAT01281Y C513 CC 47 PF 2KV SL CP3YSL7Q1J
Q505 KTA102SRTK TNAAB05003
Q506 KTA1504S_Y_RTK TAAA1504SY C514 CC 470 PF 500V B C0JTB05Q2K
C515 CP 0.01 UF 400V ECQP P11104103J
Q509 KTC3875S_Y_RTK TCAA3875SY C516 CC 0.0022UF 250V CD39E0MH3M
Q510 KTA1281_Y TAAT01281Y C517 CE 220 UF 25V E02LU3221M
Q511 KTC3875S_Y_RTK TCAA3875SY C518 CC 0.001 UF 250V CD39E0M13M
Q512 KTC3875S_Y_RTK TCAA3875SY
Q513 KTA1504S_Y_RTK TAAA1504SY C519 CE 22 UF 35V E02LU4220M
C520 CE 100 UF 50V E02LT5101M
B Q515 2SD1207(S,T)-AE TD3T012070 C521 CE 1000 UF 16V E61FF2102D
Q8101 KTC3875S_Y_RTK TCAA3875SY C522 1000 UF 6.3V E61FT0102D
Q8102 KTA1504S_Y_RTK TAAA1504SY C523 CE 25YK470MKC 470 UF 25V E0ELF3471M
Q8104 DTC144EKAT146 TNYJD05001
Q8105 DTA114EKAT146 TPYJB05001 C526 CE 220 UF 6.3V E02LU0221M
C527 CE 100 UF 10V E02LU1101M
D502 1N4005-EIC D2WXN40050 C528 CE 2.2 UF 50V E50HU52R2M
D503 1N4005-EIC D2WXN40050 C531 CE 100 UF 16V E02LU2101M
D505 1N4005-EIC D2WXN40050 C533 CE 100 UF 10V E02LU1101M
D506 1N4005-EIC D2WXN40050
D508 MTZJ5.6B T-77 D97U05R61B C535 CE 330 UF 16V E02LU2331M
C536 CE 220 UF 6.3V E02LU0221M
D509 RGP10KE-G3 D2LTP10KE0 C538 CE 220 UF 6.3V E02LU0221M
C D510 RGP15J-G23 D23TGP15J0 C540 CC 0.01 UF 50V B CQGTB0414K
D511 10ERB20-TA1B2 D28T0ERB20 C541 CC 0.01 UF 50V F CS0PF0414Z
D512 RGP15J-G23 D23TGP15J0
D513 10ERB20-TA1B2 D28T0ERB20 C8101 CC 0.01 UF 50V B CS0PB0414K
C8105 CC 0.1 UF 25V B CS0PB0315K
D515 11EQS04N-TA1B2 D28TQS04N0 C8106 CC 0.001 UF 50V B CS0PB0413K
D516 1SS133T-77 D1VT001330 C8107 CC 0.001 UF 50V B CS0PB0413K
D517 MTZJ4.3B T-77 D97U04R31B C8111 CC 0.001 UF 50V B CS0PB0413K
D519 10ERB60-TA2B5 D28X0ERB60
D520 1SS133T-77 D1VT001330 C8112 CE 1000 UF 6.3V E02LT0102M
C8113 CE 470 UF 6.3V E02LU0471M
D521 1SS133T-77 D1VT001330 C8114 CE 470 UF 6.3V E02LU0471M
D522 D1SS133T-77 D1VT001330 C8115 CE 1000 UF 6.3V E02LT0102M
D D523 MTZJ3.6B T-77 D97U03R61B C8116 CC 33 PF 50V CH CS0PCH4L1J
D525 1SS133T-77 D1VT001330
D527 21DQ04N-TA2B1 D28T21DQN4 RESISTORS
R502 R,METAL OXIDE 1.8 OHM 1W R3X1811R8J
D528 MTZJ5.1B T-77 D97U05R11B R503 RC 1.5M OHM 1/2W R002T2155J
D531 MTZJ27B T-77 D97U02701B R504 RC 680K OHM 1/16W R803R9684J
D532 11EQS04N-TA2B5 D28XQS04N0 R505 RC 22 OHM 1/4W R002T4220J
D533 MTZJ2.2B T-77 D97U02R21B R506 RC 100 OHM 1/16W R803R9101J
D534 1SS133T-77 D1VT001330
R507 R,FUSE 10 OHM 1/4W R63884100J
D535 MTZJ5.1B T-77 D97U05R11B R509 RC 1K OHM 1/16W R803R9102J
D536 MTZJ3.0B T-77 D97U03R01B R510 R,METAL OXIDE 3.3 OHM 1W R3X1813R3J
D8101 1SS355 TE-17 DD7R0S3550 R511 R,FUSE 68 OHM 1/4W R65584680J
E
R512 RC 100K OHM 1/2W R002T2104J
COILS AND FILTERS
B501 CORE,BEADS 024HT03563 R513 RC 10K OHM 1/4W R002T4103J
L501 COIL,LINE FILTER 029X000123 R514 RC 1K OHM 1/4W R002T4102J
L503 COIL 22 UH 02167E220K R515 RC 1K OHM 1/16W R803R9102J
L505 COIL 22 UH 02167E220K R516 RC 10 OHM 1/16W R803R9100J
L8101 COIL 10 UH 02167F100J R517 R,METAL 1.2K OHM 1/6W R4X5T6122F
R8102
R8103
RC
RC
56K OHM 1/16W
470 OHM 1/4W
R803R9563J
R002T4471J
G OPERATION 3 PCB ASSY
SWITCHES AND RELAYS
R8104 RC 6.8K OHM 1/16W R803R9682J OS651 REMOTE RECEIVER 077A040001
R8105 RC 390 OHM 1/4W R002T4391J SW667 SWITCH TACT 0504R01T38
R8108 RC 8.2K OHM 1/16W R803R9822J
CAPACITORS
R8109 RC 68 OHM 1/16W R803R9680F C674 KA 47 UF 6.3V E02LU0470M
R8110 RC 75 OHM 1/16W R803R9750F C651 CC 0.1 UF 25V B CS0PB0315K C
R8111 RC 75 OHM 1/16W R803R9750F
R8112 RC 75 OHM 1/16W R803R9750F
RESISTORS
R8113 RC 75 OHM 1/16W R803R9750F
R666 RC 2.2K OHM 1/4W R002T4222J
R8114 RC 220 OHM 1/16W R803R9221F
R8115 RC 220 OHM 1/16W R803R9221F OTHERS
R8120 RC 1 OHM 1/4W R002T4010J CP603 CONNECTOR PCB SIDE 069EV93050
CP604 CONNECTOR PCB SIDE 069EV53050
OTHERS PCB280 PCB DEE038A 13DEE038AW
F501 FUSE 50T016H 080NT1R604
CD8001 CORD JUMPER 122H0C3001
CP502 CORD CONNECTOR 06C32E3504
CP503 CONNECTOR PCB SIDE 069J7C0599 D
FH501 HOLDER,FUSE 06710T0009
FH502 HOLDER,FUSE 06710T0009
DV-2850-S 51
5 6 7 8
1 2 3 4
6. ADJUSTMENT
6.1 WHEN REPLACING DVD DECK
A
NOTE
Before your operation, please read PREPARATION OF SERVICING .
Use the Lead Free solder.
Manual soldering conditions
Soldering temperature: 320 20C
Soldering time: Within 3 seconds
Soldering combination: Sn-3.0Ag-0.5Cu
When Soldering/Removing of solder, use the draw in equipment over the Pick Up Unit to prevent the
C Flux smoke from it.
Pick Up PCB
D
Short circuit using a
soldering iron.
Fig. 1
52 DV-2850-S
1 2 3 4
5 6 7 8
POWER ON
POWER
DVD test disc Test mode remote control
(GGV1025) unit (GGF1381)
ON B
DISC SET
<TRAY OPEN> <TRAY CLOSE>
GGF1381
Test mode DSC - &&&
remote control
unit
Notes:
After going into test mode, if you play back the disc, "DISC-NON" is displayed.
The video signal and the audio signal are outputted during the test mode.
The SKIP key and the SCAN key are effective during the test mode.
E
ESC
POWER
OR
GGF1381
Test mode
OFF remote control F
unit
DV-2850-S 53
5 6 7 8
1 2 3 4
A
DISC REMOVAL METHOD AT NO POWER SUPPLY
1. Remove the Top Cabinet and Front Cabinet. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2. Rotate the Main Gear in the direction of the arrow by hand.
(Refer to Fig. 1)
3. Draw the Tray.
Main Gear DVD Deck
Fig. 1
NOTE: The above procedure will reset ALL of the player's settings to the default factory state.
D PREPARATION OF SERVICING
The laser diode used for a pickup head may be destroyed with external static electricity.
Moreover, even if it is operating normally after repair, when static electricity discharge is
received at the time of repair, the life of the product may be shortened.
Please perform the following measure against static electricity, be careful of destruction of a
laser diode at the time of repair.
Place the unit on a workstation equipped to protect against static electricity, such as
conductive mat.
Soldering iron with ground wire or ceramic type is used.
E A worker needs to use a ground conductive wrist strap for body.
54 DV-2850-S
1 2 3 4
5 6 7 8
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 TEST MODE IN
A
Test Mode Functional Specification
1 Test mode entry
In the power ON state, press the [ESC] (A8-5F) key and [TEST / RANDOM] (A8-5E) key in order of the Test mode remote control
unit.
Light the all FL and LEDs.
OSD displays test mode.
Note:
* When pressing the keys of something, the FL displays "NO DISC" and the LED lighting disappears.
B
2 Release the Test mode
Turn off the power.
Press the [ESC] (A8-5F) key of the remote control unit.
3 LD ON
DVD : Press the [TEST] (A8-5E) and [1] (A8-01) keys in order, and turn on the laser diode (650n).
CD : Press the [TEST] (A8-5E) and [4] (A8-04) keys in order, and turn on the laser diode (780n).
DV-2850-S 55
5 6 7 8
1 2 3 4
7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE
1 7
8
5 9
6
12 13
14
15
10
B 11
8 Slider position [S ]
In Side Switch ON : [01]
In Side Switch OFF : [00]
E
9 Output video system [V ]
NTSC system : [NTSC]
PAL system : [PAL]
Automatic setting : [AUTO]
Scart terminal output [SK ]
(Display only the WY model which can do the output setting
of scart terminal.)
VIDEO : [00]
S-VIDEO : [01]
RGB : [02]
56 DV-2850-S
1 2 3 4
5 6 7 8
7.1.3 FUNCTIONAL SPECIFICATION OF THE SHORTCUT KEY
Only
Only during
during normal
normal playback,
playback, the
the following
following shortcut
shortcut keys
keys can
can be
be assigned
assigned by
by pressing
pressing aa required
required key
key after
after pressing
pressing the
the ESC
ESC
key of the remote control unit. To quit, press the ESC
key of the remote control unit. To quit, press the ESC keykey
Remote
Remote Control
Control Remote
Remote A
Command
Command Contents
Contents Conditions
Conditions Key
Key Name
Name Control
Control Code
Code
Memory
Memory clear
clear and
and region
region // revision
revision indication
indication CLEAR
CLEAR (1)
(1) A8-45
A8-45
Average
Average value
value measurement
measurement of of DVD
DVD error
error rate
rate 55 (1)
(1) A8-05
A8-05
CD
CD error
error rate
rate measurement
measurement 55 (1)
(1) A8-05
A8-05
Scart
Scart terminal output
terminal output :: VIDEO
VIDEO AUDIO
AUDIO AF-BE
AF-BE
Scart
Scart terminal
terminal output
output :: S-VIDEO
S-VIDEO WY,
WY, models
models equipped
equipped with
with Scart
Scart terminal
terminal SUBTITLE
SUBTITLE AF-36
AF-36
Scart
Scart terminal
terminal output
output :: RGB
RGB ANGLE
ANGLE AF-B5
AF-B5
Progressive
Progressive OFF
OFF R_SKIP
R_SKIP A3-9D
A3-9D
Only
Only for
for progressive
progressive models
models
Progressive ON
Progressive ON F_SKIP
F_SKIP A3-9C
A3-9C
ZOOM
ZOOM ON ON (X2
(X2 ->
-> X4
X4 ->
-> x1)
x1) ZOOM
ZOOM AF-37
AF-37
B
Service
Service mode
mode indication
indication (error
(error rate
rate indication,
indication, etc.)
etc.) CHP/TIM
CHP/TIM (1)
(1) A8-13
A8-13
Model
Model information
information indication
indication CHAP
CHAP (1)
(1) A8-40
A8-40
Title
Title search Input
search Input mode
mode ININ SIDE
SIDE A A (1)
(1) A8-4D
A8-4D
Title
Title No.
No. input
input Numbers
Numbers (1)(1) A8-00
A8-00 to
to A8-09
A8-09
Search
Search execution
execution PLAY
PLAY (1)
(1) A8-17
A8-17
A.MON
A.MON (1)(1) A8-1E
A8-1E
Region
Region confimation
confimation mode
mode Numbers
Numbers (1)(1) A8-01
A8-01 to
to A8-08
A8-08
1
1 :: Test
Test mode
mode remote
remote control
control unit
unit
Service
Service mode
mode indication
indication (ESC
(ESC ++ CHP/TIM
CHP/TIM keys)
keys)
ID
ID Address
Address C
The
The error
error rate
rate is
is always
always displayed
displayed in
in exponential
exponential notation, e.g., .
notation, e.g., . ee -- ,
, for
for both
both DVDs
DVDs and
and CDs.
CDs.
EDC/ID/AV
EDC/ID/AV 11 error
error history
history (ID
(ID Address,
Address, EDC/ID
EDC/ID Error,
Error, last
last eight
eight errors)
errors)
Calculation
Calculation of
of the
the average
average error
error rate
rate (ESC
(ESC ++ "5"
"5" [Test
[Test mode
mode remote
remote control
control unit]
unit] keys)
keys)
The
The average
average of of the
the last
last eight
eight error
error rates
rates is
is calculated
calculated and
and indicated
indicated in
in exponential
exponential notation.
notation. After
After the
the calculation
calculation is
is completed,
completed, "OK"
"OK" or
or "NG"
"NG" is
is
displayed.
displayed. IfIf "NG"
"NG" isis displayed,
displayed, the
the disc
disc tray
tray will
will open
open (for
(for both
both DVDs
DVDs and
and CDs)
CDs)
For
For DVDs:
DVDs: OK OK with
with 5.0e-4
5.0e-4 or
or less,
less, for
for CDs:
CDs: OKOK with
with 7.6e-3
7.6e-3 oror less
less
Indication
Indication of
of model
model information
information (ESC
(ESC ++ CHAP
CHAP keys)
keys)
The
The items
items from
from 12
12 to
to 15
15 of
of the
the TEST
TEST MODE
MODE Indications
Indications are
are displayed.
displayed. However,
However, in
in the
the indications,
indications, S
S in
in the
the standard
standard test
test mode
mode is
is changed
changed to
to
CHIP
CHIP VERSION,
VERSION, and
and MM is
is changed
changed to
to RF
RF VERSION.
VERSION. For
For details,
details, see
see 7.1.4.
7.1.4.
Region
Region confirmation
confirmation mode
mode (ESC
(ESC ++ A.MON
A.MON [Test
[Test mode
mode remote
remote control
control unit]
unit] ++ "1"-"8"
"1"-"8" [Test
[Test mode
mode remote
remote control
control unit]
unit] keys)
keys)
After
After you
you press
press the
the A.MON
A.MON key
key while
while holding
holding the
the ESC
ESC key
key pressed
pressed and
and then
then input
input the
the region
region number,
number, ifif the
the number
number is
is different
different from
from that
that set
set in
in D
the
the unit,
unit, an
an error
error message
message is
is displayed,
displayed, and
and the
the tray
tray opens.
opens.
DV-2850-S 57
5 6 7 8
1 2 3 4
7.1.4 SPECIFICATION OF MODEL INFORMATION DISPLAY
To display model information : Press the ESC key then the CHAP key.
To close the model information display : Press the ESC key.
A
Display contents
1
2
AREA : WY REGION : 2
3 ROM NUMBER YAD5215B
Don't care. REG CHK 40
C
1 Destination indication
Display it according to model information set from the FL Driver IC.
2 Region No.
3 ROM number
Rom display Version.
D 6 CHIP VERSION
58 DV-2850-S
1 2 3 4
5 6 7 8
7.1.5 FUNCTIONAL SPECIFICATION OF THE SERVICE MODE
Display during Service Mode
To enter Service Mode, press the CHP/TIM key while holding the ESC key pressed.
To quit, press the ESC key.
A
Service mode display
1 ID Address
2 Error rate (always displayed), in exponential notation
ERROR RATE :
()
Number of error
Step 1 Step 2
%%e -& %%e -4
%%e -6 : OK 3.0e -4 : OK
%%e -5 : OK 4.0e -4 : OK
%%e -4 : Refer to Step 2 5.0e -4 : OK
%%e -3 : NG 6.0e -4 : NG
%%e -2 : NG 7.0e -4 : NG
C
3 EDC/ID error history (ID Address, EDC/ID errors, last eight errors)
Note:
Error of AV1 is not supported in this player.
3
1
2
D
DV-2850-S 59
5 6 7 8
1 2 3 4
7.1.6 METHOD FOR DIAGNOSING DEGRADATION OF THE LDS ON THE PICKUP ASSY
Case when this diagnosis is required :
When playback of any disc, including a test disc (DVD: GGV1025, CD: STD-905), cannot be performed
A
How to diagnose
In the case mentioned above, degradation of the laser diodes (LDs) mounted on the PICKUP Assy is suspected.
Measure the voltage between the two ends of one of the resistors mentioned below.
No playback of a DVD :
Measure the voltage between the two ends of R2321 or R2323 on the DVDM
Assy. If the voltage is 0.4 V or higher, the 650-nm LD is degraded.
If the measurements show degradation
of an LD, replace the PICKUP Assy.
B No playback of a CD :
Measure the voltage between the two ends of R2320 or R2322 on the DVDM
Assy. If the voltage is 0.4 V or higher, the 780-nm LD is degraded.
To OPTICAL PICKU
CP2301
A DVD MT PCB ASSY
CP2301
C2301 2303
Q2307 Q2306
W809
D
R2307
R2306
C2311
W817 R2320 Q2304
CP2303
R2335
R2308
CP2303 Q2302
R2338
Q2303
R2321 R2323
C4003
R2334
C4002
R2309
R2326
R2327
C2310
R2312
R2322
R2311 R2313
C2320
W819
R2333 R2337
R2332
Front side
SIDE A
C
60 DV-2850-S
1 2 3 4
5 6 7 8
7.1.7 TROUBLE SHOOTING
No. Symptoms Diagnosis Contents Possible Defective Points
1 The power is not turned on. Check the voltage of AT+3.3V, 28V and FLDC on the POWER
POWER PCB ASSY
SUPPLY Unit.
A
Are wires of output connector (POWER PCB ASSY) and CP4003
Connector / cable
(DVDM Assy) disconnected or damaged ?
OPERATION 2 Assy
Check that the voltage at IC651-pin 10 (K 1) on the FLKY Assy Tact SW
becomes about 2.7V when the POWER key is pressed and 0 V when it (when operation of only the
is released. POWER key on the main unit is
not accepted)
FLKY Assy
Check that the voltage at OS651-pin 1 (IR) on the OPERATION1 Assy Remote receiver section
is in the range between 0 and 3.3 V while receiving signals from the (when operation of only the
B
remote control unit when any key on it is pressed. POWER key on the remote
control unit is not accepted)
2 An opening screen is not
displayed on the monitor Check the voltage of E+6.8V and SW+3.3V on the POWER SUPPLY
(The FL display lights. The Unit.
POWER SUPPLY Unit
mechanism does not work.) Check the voltage of P.ON-H is about 2.8V on the POWER SUPPLY
Unit.
Are the signals of IC4001-pin 5(SDA) and pin 6(SCL) on the DVDM DVD MT PCB Assy
Assy fluctuating for one or two seconds after the power is turned ? EEPROM (IC4001)
DV-2850-S 61
5 6 7 8
1 2 3 4
E Symptoms That May Occur When Any Of The Following ICs Is In Failure
IC Symptoms
EEP ROM User's data cannot be stored in memory.
(DVD MT Assy : IC4001) The ID number is lost.
DVD IC Any kind of symptoms (no power, a failure in any of the servo, video and audio systems, etc.) may be
(DVD MT Assy : IC4002) generated, because the DVD processing is performed by a single chip.
62 DV-2850-S
1 2 3 4
5 6 7 8
7.2 DISASSEMBLY
REMOVAL OF MECHANICAL PARTS AND P.C. BOARDS
1-3: DVD DECK (Refer to Fig. 1-3) A
Top Cabinet
1
1 Pick Up PCB
Short circuit using a
1 1 soldering iron.
Operation 3 PCB
Operation 2 PCB 1
3
3 (A)
3
3
3 1
2 (C) 3 (B) Fig. 1-3 C
(C) 3
3
3 NOTE
2 3
(C) 1. Before your operation, please read PREPARATION
2 OF SERVICING.
2 Operation PCB
Front Cabinet
Fig. 1-1 2. Use the Lead Free solder.
3. Manual soldering conditions
Soldering temperature: 320 20C
1-2: POWER PCB (Refer to Fig. 1-2) Soldering time: Within 3 seconds
1. Disconnect the following connectors: Soldering combination: Sn-3.0Ag-0.5Cu
(CP4003, CP8001). 4. When Soldering/Removing of solder, use the drawing
2. Remove the 2 screw 1. equipment over the Pick Up Unit to prevent the Flux D
3. Remove the 4 screws 2. smoke from it.
4. Remove the Power PCB in the direction of arrow. 5. When installing the DVD Deck, remove all the soldering
on the short circuit position after the connection of Pick
2 2
Up PCB and DVD PCB connector.
2
1-4: DVD PCB (Refer to Fig. 1-4)
2 Power PCB
1. Remove the 4 screws 1.
2. Remove the 4 screws 2.
1 3. Remove the DVD PCB in the direction of arrow.
1
2
2 E
2
2
DVD PCB
1
11
Fig. 1-2
1
Fig. 1-4
F
DV-2850-S 63
5 6 7 8
1 2 3 4
Loader Ass'y
1 Traverse Ass'y
Tray
1
1
Loader Ass'y
Check Hook
Fig. 2-2-C
Traverse Ass'y 1
Screw Torque: 2.5 0.3kgfcm (Screw 1)
Screw Torque: 1.0 0.3kgfcm (Screw 2)
Screw Torque: 2.0 0.3kgfcm Fig. 2-3-A
Fig. 2-2-A
F
64 DV-2850-S
1 2 3 4
5 6 7 8
2
1 B
Fig. 2-4-A
Pulley Motor 7.0 0.1mm
NOTE
Loading Motor
1. In case of the Rack Loading installation, hook the Rack
Loading on the Loader Sub Ass'y as shown Fig. 2-4-B.
2. When installing the Gear Main, take care the direction
Safety surface for pressing
of the insert. of up or down as shown Fig. 2-4-C.
Fig. 2-3-B
WHITE (2)
C
Check Hook
Loading Motor PCB Assy
Fig. 2-3-C Fig. 2-4-B
Main Gear
Down Side
Fig. 2-4-C
Magnet Clamper
Main Frame
1 1
Loading Motor PCB Assy Clamper
Check Hook 1 Fig. 2-5-A
Fig. 2-3-E
DV-2850-S 65
5 6 7 8
1 2 3 4
NOTE
1. In case of the Clamper Ass'y installation, install Feed Motor
Plate Clamper
Check Lock
Clamper 1 5
Traverse Ass'y 5
Gear Feed
Fig. 2-5-B
4
2-6: HOLDER TRAVERSE/INSULATOR (F)/INSULATOR
B (R) (Refer to Fig. 2-6-A) Rack Feed Ass'y Gear Middle
2
1. Remove the Holder Traverse.
2. Remove the 2 Insulator (F). Switch PCB Ass'y
Push Push
Fig. 2-6-B
[OK] [NG]
2-7: SWITCH PCB ASS'Y/GEAR MIDDLE/GEAR FEED/RACK
FEED ASS'Y/FEED MOTOR (Refer to Fig. 2-7-A)
1. Unlock the support 1.
Fig. 2-7-B
2. Remove the Gear Middle.
3. Remove the screw 2.
4. Remove the Rack Feed Ass'y.
E
5. Remove the screw 3.
Gear Motor
6. Remove the Switch PCB Ass'y. 8.0 0.2mm
7. Remove the screw 4.
8. Remove the Gear Feed. Feed Motor
9. Remove the 2 screws 5.
10. Remove the Feed Motor.
11. Remove the Gear Motor.
Safety surface for pressing
of the insert.
Fig. 2-7-C
66 DV-2850-S
1 2 3 4
5 6 7 8
~ SPINDLE MOTOR ~
YELLOW (2)
GREEN (1)
Fig. 2-7-D
B
Check Hook Traverse Ass'y
Check Hook
Check Hook
Check Hook
C
2-8: FFC WIRE HANDLING
1. When installing the FFC, fold it correctly and install it as
shown from Fig. 2-8.
NOTE
1. Do not make the folding lines except the specified
positions for the FFC.
[ 24 pin FFC ]
Printing_Serface
D
851mm
Reinforcement Plat
To Pick Up PCB
Fig. 2-8
DV-2850-S 67
5 6 7 8
1 2 3 4
7.3 IC INFORMATION
The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
A List of IC
MT1389FE, LA6565, PT6315
256 255 254 253 252251 250 249 248 247 246 245 244 243 242 241 240 239 238 237 236 235 234 233 232 231 230 229 228 227 226 225 224 223 222 221 220 219 218 217 216 215 214 213 212 211 210 209 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193
MC_DATA (PD)
NC
NC
NC
CRTPLP
XTALO
DACVDDA
YUT7/ASDATA5
(PD) ASDATA4
(PD) ASDATA3
(PD) ASDATA2
(PD) ASDATA1
(PD) ASDATA0
PLLVDD3
RFGND18
129 130 131 132 133134 135 136 137 138 139 140 141142 143144 145 146 147 148 149 150 151152 153 154155 156 157 158 159 160 161162 163 164 165 166 167 168 169 170 171 172173 174 175 176 177 178179 180 181 182 183 184 185 186 187 188189 190 191192
DACVDDB
RFVDD3
YUV4/G
DACVSSA
NC
NC
DACVSSC
SPMCLK
YUV6/R
YUV2/C
IDACEXLP
RFVDD18
HSYN/V_ADIN2
DACVSSB
SPBCK/ADTA5
LPFON
YUV5/B
YUV1/Y
DVDD18
VSYN/V_ADIN1
RFGND
ADCVSS
DVDD3
RFRPDC
OSP
SPLRCK
SPDATA
ADCVDD3
YUV3/CVBS
RFRPAC
LPFIN
HRFZC
PLLVSS
AGND LPFOP
LPFIP
JITFO
XTALI
2 1
DVDD3
JITFN
ABCK
(3) DVSS
SPDIF
ACLK
(18) DVSS
(PD) ALRCK
B DVDA
DVDB
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3
DVDC
DVDD NC NC
253 OSN
DVDRF[P 192 YUV0/CIN NC NC
NC DVDRF[N 254 RFGC 191 FS NC NC
MA NC NC
255 IREF 190 VREF
MB NC NC
256 AVDD3 189 DACVDDC
MC NC NC
MD DVDD3
NC SA NC NC
108
NC SB NC NC
NC SC
Mhz (PD) DQM2
Data DLL VIDEO
NC SD (PD) DQM3
PLL DAC
NC CDFON RD24
NC CDFOP RD25
TNI NC NC
TPI RD26
MIDI1 DVDD18
MIDI2 NC NC
C LDO2 NC NC
LDO1 RF RD29
SVDD3 Circuits (PU) RD30
CSO/RFOP MPEG/MICON/RF-AMP (PU) RD3/ASDATA5
RFLV/RFON DVDD3
SGND RA4
V2REFO INT_ADDA IC4002 RA5
V20 RA6
VREFO (18) DVSS
FEO MT1389FE/C2-L RA7
TEO (3)DVSS
TEZIS[LV RA8
OP_OUT RA9
OP_INN RA11
OP_INP CKE
DMO RCLK
FMO DVDD3
TROPENPWM NC NC
PWMOUT1/V_ADIN9 NC NC
TRO DVDD18
D FDO RA3
USB_VSS RA2
NC NC RA1
NC NC (3) DVSS
USB_VDD3 RA0
FG/V_ADIN8 (PU) RA10
TDI/V_ADIN4 (JTAG) BA1
TMS/V_ADIN5 (JTAG) (18) DVSS
TCK/V_ADIN6 (JTAG) APLL BA0
TDO/V_ADIN7 (JTAG) XRCS
DVDD18 DMPLL DMPLL DVDD3
IOA2 (PU) XRAS
IOA3 (PU) XCAS
IOA4 (PU) XRWE
65 APLLVSSVDD3 125 RD0
IOA5 (PU) DQM1
IOA6 (PU) 66 XIOWR 126 RD15 DQS1
IDA7 (PU) 67 A16 127 DVDD3 RD8
HIGHA0 (PU) 68 HIGHA7 (PU) (3) DVSS
128 RD14
IOA18 (PU) RD9
IOA2/V_ADIN0
E
HIGHA6 (PU)
HIGHA5 (PU)
HIGHA4 (PU)
HIGHA3 (PU)
HIGHA2 (PU)
HIGHA1 (PU)
XPRST (PU)
XUWR (PU)
UP1_2 (PU)
UP1_3 (PU)
UP1_4 (PU)
UP1_5 (PU)
UP1_6 (PU)
UP1_7 (PU)
UP3_0 (PU)
UP3_1 (PU)
UP3_4 (PU)
PU3_5 (PU)
IOCA1 (PU)
XURD (PU)
XINT0 (PU)
DVSS (18)
DVSS (18)
IOA0 (PU)
DVSS (3)
DVDD18
ALE (PU)
DVSS (3)
DVSS RD11
ICE (PD)
DVDD18
DVDD3
DVDD3
DVDD3
DQM0
XIODE
DQS0
IOA20
APLLCAP RD12
RD7
RD6
RD5
RD4
RD3
RD2
RD1
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
A17
IR
APLLVSS RD13
65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128
NC
68 DV-2850-S
1 2 3 4
5 6 7 8
Block Diagram A
Servo IO B
Servo
Motor Processor
Drive Video De-
Processor interlacer
Spindle
Control
FLASH
MPEG-1/2
ROM Audio JPEG
Memory DSP Video Decoder
Controller
DRAM
System Audio
Parser DAC
Audio
CPPM/CPRM Output
DRM
SPDIF
System
GPIO CPU
32-bit
RISC D
IR/VFD
DV-2850-S 69
5 6 7 8
1 2 3 4
70 DV-2850-S
1 2 3 4
5 6 7 8
No. Pin Name I/O Pin Function No. Pin Name I/O Pin Function
91 AD7 I Microcontroller address/data 7 137 DQM1 I/O Data mask 1
92 A17 O Flash address 17 138 RWE# O DRAM Write enable, active low
A
93 IOA0 I/O Microcontroller address 0/IO 139 CAS# O DRAM column address strobe, active low
94 DVSS 3.3V Ground pin for internal digital circuitry 140 RAS# O DRAM row address strobe, active low
95 UWR# I Microcontroller write strobe, active low 141 DVDD3 3.3V power pin for internal digital circuitry
96 URD# I Microcontroller read strobe, active low 142 RCS# O DRAM chip select, active low
97 DVDD18 1.8V power pin for internal digital circuitry 143 BA0 I/O DRAM bank address 0
98 UP1_2 I/O Microcontroller port 1-2 144 DVSS 1.8V Ground pin for internal digital circuitry
99 UP1_3 I/O Microcontroller port 1-3 145 BA1 I/O DRAM bank address 1
100 UP1_4 I/O Microcontroller port 1-4 146 RA10 I/O DRAM address 10
101 UP1_5 I/O Microcontroller port 1-5 147 RA0 I/O DRAM address 0
102 UP1_6 I/O Microcontroller port 1-6 148 DVSS 3.3V Ground pin for internal digital circuitry
I2C clock pin B
149 RA1 I/O DRAM address 1
103 UP1_7 I/O Microcontroller port 1-7 150 RA2 I/O DRAM address 2
I2C data pin 151 RA3 I/O DRAM address 3
104 UP3_0 I/O Microcontroller port 3-0 152 DVDD18 1.8V power pin for internal digital circuitry
8032 RS232 RXD 153 NC
105 UP3_1 I/O Microcontroller port 3-1 154 NC
8032 RS232 TXD 155 DVDD3 3.3V power pin for internal digital circuitry
106 UP3_4 I/O Microcontroller port 3-4 156 RCLK I/O Dram clock
Hardwired RD232 RXD
I2C clock pin 157 CKE O DRAM clock enable
107 UP3_5 I/O Microcontroller port 3-5 158 RA11 I/O DRAM address bit 11
Hardwired RD232 TXD
I2C data pin 159 RA9 I/O DRAM address 9 C
108 DVDD3 3.3V power pin for internal digital circuitry 160 RA8 I/O DRAM address 8
109 ICE I Microcontroller ICE mode enable 161 DVSS 3.3V Ground pin for internal digital circuitry
110 PRST# I Power on reset input, active low 162 RA7 I/O DRAM address 7
111 IR I IR control signal input 163 DVSS 1.8V Ground pin for internal digital circuitry
112 INT0# I/O Microcontroller external interrupt 0, active low 164 RA6 I/O DRAM address 6
113 DQM0 I/O Data mask 0 165 RA5 I/O DRAM address 5
114 DQS0 I/O GPIO 166 RA4 I/O DRAM address 4
115 RD7 I/O DRAM data 7 167 DVDD3 3.3V power pin for internal digital circuitry
116 DVSS 1.8V Ground pin for internal digital circuitry 168 RD31 I/O GPIO
117 RD6 I/O DRAM data 6 169 RD30 I/O GPIO D
118 RD5 I/O DRAM data 5 170 RD29 I/O GPIO
119 DVSS 3.3V Ground pin for internal digital circuitry 171 NC
120 RD4 I/O DRAM data 4 172 NC
121 RD3 I/O DRAM data 3 173 DVDD18 1.8V power pin for internal digital circuitry
122 DVDD18 1.8V power pin for internal digital circuitry 174 RD26 I/O GPIO
123 RD2 I/O DRAM data 2 175 NC
124 RD1 I/O DRAM data 1 176 RD25 I/O GPIO
125 RD0 I/O DRAM data 0 177 RD24 I/O GPIO
126 RD15 I/O DRAM data 15 178 DQM3 I/O GPIO
127 DVDD3 3.3V power pin for internal digital circuitry 179 DQM2 I/O GPIO E
128 RD14 I/O DRAM data 14 180 NC
129 RD13 I/O DRAM data 13 181 NC
130 RD12 I/O DRAM data 12 182 DVDD3 3.3V power pin for internal digital circuitry
131 RD11 I/O DRAM data 11 183 NC
132 RD10 I/O DRAM data 10 184 NC
133 RD9 I/O DRAM data 9 185 NC
134 DVSS 3.3V Ground pin for internal digital circuitry 186 NC
135 RD8 I/O DRAM data 8 187 NC
136 DQS1 I/O GPIO 188 NC
F
DV-2850-S 71
5 6 7 8
1 2 3 4
No. Pin Name I/O Pin Function No. Pin Name I/O Pin Function
189 DACVDDC 3.3V power pin for VIDEO DAC circuitry 213 ALRCK I/O Audio left/right channel clock
190 VREF Bandgap reference voltage Trap value in power-on reset:
A 1:use external 373
191 FS Full scale adjustment 0:use internal 373
192 YUV0 O Video data output bit 0 214 ABCK O Audio bit clock
Compensation capacitor Phase de-modulation
193 DACVSSC Ground pin for VIDEO DAC circuitry 215 ACLK I/O Audio DAC master clock
194 YUV1 O Video data output bit 1 216 DVSS 1.8V Ground pin for internal digital circuitry
Analog Y output 217 ASDATA0 I/O Audio serial data 0 (Front-Left/Front-Right)
195 DACVDDB 3.3V power pin for VIDEO DAC circuitry DSD data left channel
Trap value in power-on reset:
196 YUV2 O Video data output bit 2 1:manufactory test mode
Analog chroma output 0:normal operation
197 DACVSSB Ground pin for VIDEO DAC circuitry 218 ASDATA1 I/O Audio serial data 1 (Left-Surround/Right-Surround)
B DSD data right channel
198 YUV3 O Video data output bit 3 Trap value in power-on reset:
Analog composite output 1:manufactory test mode
199 DACVDDA 3.3V power pin for VIDEO DAC circuitry 0:normal operation
While only 2 channels output:
200 YUV4 O Video data output bit 4 GPO
Green or Y 219 ASDATA2 I/O Audio serial data 2 (Center/LFE)
Ground pin for VIDEO DAC circuitry DSD data left surround channel
201 DACVSSA
Trap value in power-on reset:
202 YUV5 O Video data output bit 5 1:manufactory test mode
Blue or CB 0:normal operation
While only 2 channels output:
203 YUV6 O Video data output bit 6 GPO
Red or CR
220 ASDATA3 I/O Audio serial data 3 (Center-back/Center-left-
C 204 DVDD3 3.3V power pin Video DAC digital circuitry only back/Center-right-back, in 6.1 or 7.1 mode)
DSD data right surround channel
205 VSYN I/O Vertical sync input/output Trap value in power-on reset:
While no External TV-encoder: 1:manufactory test mode
Vertical sync for video-input 0:normal operation
Version AD input port 1 While only 2 channels output:
GPIO GPIO
206 YUV7 I/O Video data output bit 7 221 DVDD18 1.8V power pin for internal digital circuitry
While no External TV-encoder:
222 ASDATA4 I/O Audio serial data 4 (Down-mixed Left/Right)
Microcontroller external interrupt 3 DSD data center channel
Audio serial data 5 part II:DSD data sub- Trap value in power-on reset:
woofer channel or Microphone output 1:manufactory test mode
GPIO 0:normal operation
While only 2 channels output:
D 207 HSYN I/O Horizontal sync input/output
Microcontroller external interrupt 1
While no External TV-encoder: GPIO
Horizontal sync for video-input
Microcontroller external interrupt 4 223 DVSS 3.3V Ground pin for internal digital circuitry
Version AD input port 2 224 MC_DATA I/O Microphone serial input
GPIO While not support Microphone:
Microcontroller external interrupt 2
208 SPMCLK I/O Audio DAC master clock of SPDIF input GPIO
While SPDIF input is not used:
225 SPDIF O SPDIF output
Serial interface port 0 clock pin
GPIO 226 RFGND18 Analog ground
209 SPDATA I/O Audio data of SPDIF input 227 RFVDD18 Analog power 1.8V
While SPDIF input is not used:
228 XTALO O 27M crystal out
Serial interface port 0 data-in
E GPIO 229 XTALI I 27M crystal in
210 SPLRCK I/O Audio left/right channel clock of SPDIF input 230 JITFO O The output terminal of RF jitter meter
While SPDIF input is not used:
231 JITFN I The input terminal of RF jitter meter
Serial interface port 0 data-out
GPIO 232 PLLVSS Ground pin for data PLL and related analog circuitry
211 SPBCK I/O Audio bit clock of SPDIF input 233 IDACEXLP O Data PLL DAC Low-pass filter
While SPDIF input is not used: 234 PLLVDD3 Power pin for data PLL and related analog circuitry
Serial interface port 0 chip select
Audio serial data 5 part I:DSD data sub- 235 LPFON O The negative output of loop filter amplifier
woofer channel or Microphone output 236 LPFIP I The positive input terminal of loop filter amplifier
GPIO 237 LPFIN I The negative input terminal of loop filter amplifier
212 DVDD3 3.3V power pin for internal digital circuitry 238 LPFOP O The positive output of loop filter amplifier
F
72 DV-2850-S
1 2 3 4
5 6 7 8
No. Pin Name I/O Pin Function No. Pin Name I/O Pin Function
239 ADCVDD3 Analog 3.3V Power for ADC 249 RFGND Analog Power
240 NC 250 NC A
241 ADCVSS Analog ground for ADC 251 NC
242 NC 252 OSP O RF Offset cancellation capacitor connecting
243 NC 253 OSN O RF Offset cancellation capacitor connecting
244 RFVDD3 Analog Power 254 RFGC O RF AGC loop capacitor connecting for DVD-ROM
245 RFRPDC O RF ripple detect output 255 IREF I Current reference input. It generates
reference current for RF path. Connect
246 RFRPAC I RF ripple detect input (through AC-coupling)
an external 15K resistor to this pin and
247 HRFZC I High frequency RF ripple zero crossing AVSS
248 CRTPLP O Defect level filter capacitor connecting 256 AVDD3 Analog power 3.3V
DV-2850-S 73
5 6 7 8
1 2 3 4
A
Internal Block Diagram
Signal system
FWD ground
1 Thermal shutdown 36 SGND
Input
circuit
VCCP2 3 MUTE 34
Turns the corresponding CH1 MUTE1
channal on/off.
High : output on,
Output control
VLO 4 Low : output off CH2,3,4 33 MUTE234
B
44k
VLO+ 5 11k 32 VIN4
+
+
Level shifter To VREFOUT
VO4+ 6 31 VIN4
VO4 7 + 30 VREF_IN
Level shifter
VO3+ 8 29 VREF_OUT
C
VO3 9 28 REG_OUT
(Vcc)
REG_IN
Power Power
system + system
ground ground
FR + REG_OUT FR
Level shifter
VO2+ 10 27 REG_IN
+
D
VO2 11 26 VIN+OP
+
Level shifter
VO1 12 25 VINOP
VO1+ 13 24 VO_OP
VCCP1 14 23 VIN3
44k
E VCCS 15 Sugnal system power supply 11k 22 VIN3
+
+
44k To VREFOUT
VIN1+ 16 21 VIN2
11k
+
+ 44k
VIN1 17 20 VIN2
11k
+
+
VIN1 18 19 VIN2+
74 DV-2850-S
1 2 3 4
5 6 7 8
Pin Functions
Pin No. Pin Name Pin Descriptions
1 FWD Loading output direction switching (FWD). Loading system logic input. A
2 REV Loading output direction switching (REV). Loading system logic input.
3 V CC 2 Channels 3, 4, and loading power stage power supply
4 VLO Loading output ()
5 VLO + Loading output (+)
6 VO4 + Channel 4 output (+)
7 VO4 Channel 4 output ()
8 VO3 + Channel 3 output (+)
B
9 VO3 Channel 3 output ()
10 VO2 + Channel 2 output (+)
11 VO1 Channel 2 output ()
12 VO1 Channel 1 output ()
13 VO1 + Channel 1 output (+)
14 VCCP1 Channel 1 and 2 power stage power supply
15 VCCS Signal system power supply
16 VIN1 + Channel 1 input. Input operational amplifier + input.
C
17 VIN1 Channal 1 input. Input operational amplifier input.
18 VIN1 Channel 1 input. Input operational amplifier output.
19 VIN2 + Channal 2 input. Input operational amplifier + input.
20 VIN2 Channel 2 input. Input operational amplifier input.
21 VIN2 Channel 2 input. Input operational amplifier output.
22 VIN3 Channel 3 input. Input operational amplifier input.
23 VIN3 Channal 3 input. Input operational amplifier output.
24 VO_OP Operational amplifier output D
DV-2850-S 75
5 6 7 8
1 2 3 4
Block Diagram
SG1/KS1
SG2/KS2
SG3/KS3
Control SG4/KS4
DN SG5/KS5
B
SG6/KS6
DOUT Serial SG7/KS7
Data
CLK Interlace Segment SG8/KS8
Display Memory
(24bits x 12 Words) Driver/ SG9/KS9
ST3
Grid SG10/KS10
Driver/ SG11/KS11
SG12/KS12
Key Scan
R Output SG13/KS13
OSC OSC Tlming Generator SG14/KS14
SG15/KS15
SG16/KS16
C SG17/GR12
SG18/GR11
Key Matrix Memory
SG10/GR10
SG20/GR9
SG21/GR8
SG22/GR7
LED1 SG23/GR6
LED2 LED SG24/GR5
LED3 Driver
LED4
GR1
Grid GR2
D
Driver GR3
Dimming Circuit GR4
76 DV-2850-S
1 2 3 4
5 6 7 8
Pin Description
DV-2850-S 77
5 6 7 8
1 2 3 4
78 DV-2850-S
1 2 3 4
5 6 7 8
DV-2850-S 79
5 6 7 8
1 2 3 4
8. PANEL FACILITIES
8.1 FRONT PANEL SECTION
A
Front panel
1 2 3 4 5
OPEN/CLOSE
TOP MENU MENU
STANDBY/ON
HOME
MENU RETURN
DV-2850 14 13 12 11 10 9 8 7 6
1 STANDBY/ON 9 Display
Press to switch the player on or into standby. Description of the display.
2 Disc tray
10 OPEN/CLOSE
C Press to open or close the disc tray.
3 TOP MENU
Press to display the top menu of a DVD disc.
11
Press to start or resume playback.
4 ENTER & cursor buttons
Use to navigate on-screen displays and menus. 12
Press ENTER to select an option or Press to pause playback. Press again to
execute a command. restart.
5 MENU 13
Press to display a DVD disc menu, or the Disc Press to stop the disc (you can resume play-
D Navigator if a VR format DVD-RW, CD, Video back by pressing (play)).
CD , MP3, WMA or JPEG disc is loaded.
6 RETURN 14 and
Press and hold for fast reverse/forward
Press to return to a previous menu screen.
scanning.
Press to jump to the previous/next
7 HOME MENU chapter or track.
Press to display (or exit) the on-screen display.
E
8 Compatible
80 DV-2850-S
1 2 3 4
5 6 7 8
8.2 DISPLAY
Display
Display window A
1 2 3 5 6 7 8
1 2 3 4 5 6
9
B
7 8 9
5 5 REPEAT Indicator
Lights during multi-angle scenes on a DVD
disc.6 A <> B Indicator
6 PRGSVE
Lights when the player is set to output E
progressive scan video.
7
Lights in any of the repeat play modes.
DV-2850-S 81
5 6 7 8
1 2 3 4
8
Use for reverse slow motion playback, frame
reverse and reverse scanning.
D
9
Press to start or resume playback.
10
chapter or track, then to previous chapters/
tracks.
11
Press to pause playback; press again to
E
restart.
12 PLAY MODE
Press to display the Play Mode menu. (You
can also get to the Play Mode menu by
pressing HOME MENU and selecting Play
Mode).
82 DV-2850-S
1 2 3 4
5 6 7 8
Remote control 2
Remote control
A
13 SURROUND 19 RETURN
Press to activate/switch off 2 V/SRS TruSurround. Press to return to a previous menu screen.
1
20
Press to switch the player on or into standby.
14 Use for forward slow motion playback, frame
Press to open or close the disc tray. 2 advance
AUDIO and forward scanning.
Press to select the audio channel or language.
15 ANGLE 21
Press to change the camera angle during 3 Press
SUBTITLE
to jump to the next chapter or track.
Press to select a subtitle display.
DVD multi-angle scene playback.
22 B
4Press
Number
to stop buttons
the disc (you can resume playback
16 CLEAR by pressing (play)).
Press to clear a numeric entry. 5 TOP MENU
23 DISPLAY
Press to display the top menu of a DVD disc.
17 ENTER Press to display information about the disc
Use to select menu options, etc. 6 playing.
ENTER & cursor buttons
Use to navigate on-screen displays and
24 ZOOM
menus. Press ENTER to select an option or
18 MENU Press toachange
execute the zoom level.
command. C
Press to display a DVD disc menu, or the Disc
Navigator if a VR format DVD-RW, CD, Video 7 HOME MENU
CD , MP3, WMA or JPEG disc is loaded. Press to display (or exit) the on-screen
display.
8
Use for reverse slow motion playback, frame
reverse and reverse scanning.
9
D
Press to start or resume playback.
10
chapter or track, then to previous chapters/
tracks.
11
Press to pause playback; press again to
restart.
12 PLAY MODE E
DV-2850-S 83
5 6 7 8
1 2 3 4
7 Remote
Jigs listcontrol
3 SUBTITLE
Press to select a subtitle display.
B
4 Number buttons
10
chapter or track, then to previous chapters/
tracks.
11
Press to pause playback; press again to
restart.
E 12 PLAY MODE
Press to display the Play Mode menu. (You
can also get to the Play Mode menu by
pressing HOME MENU and selecting Play
Mode).
84 DV-2850-S
1 2 3 4