51.2, AIR CONDITIONING:
01. | Area to be air-conditioned Control room
02. | Location of A/c. plant In the ground floor as shown in the
drawing .
03. | Ambient temperature 42 degree C to 45 C
04, | Inside room temperature to be | As per control panel requirement
maintained.
09. | Roof 12.5mm Gypsm Board False ceiling and
uncer deck insulation with thermo cool
sheets shall be provided by supplier.
10. | Exposed Glass Veratian binds shall be provided by the
supplier.
11. | Type of Cooler. Dry Type.
12. | General The air-conditioning shall be designed
with package units only.
The air-conditioning system should be
complete with compressors, evaporator,
condenser air handling fan, blowers,
filters, cooling coil, refrigerant piping
motor, control switches, vibration isolator,
first charge, humidifier assembly hearing
358,13.
General
coil, supply air Plenums.
Air distribution shall system consist of
galvanized steel sheet ducting, supply air
diffusers, return air grilles, acoustic
insulation for ducting complete supports
and wooden frame work for mounting
diffuser and grilles. Thermal insulation
shall be provided for drain line from drain
pan of air handling units to floor drain and
refrigerant piping.
14.
Calculations
The contractor shall submit detailed
caloulation for the capacity (Tonnage) offered.
Tentative quantities of material and labour are
provided in the schedules.
859)