Documente Academic
Documente Profesional
Documente Cultură
PumpMeter. Innovation
for more transparency.
Imagine you are planning to buy a new car. A long list of requirements
influences your choice of model. After all what use would a modern car
be if it did not come equipped with accessories such as fuel consumption
or gear-change indicator? These indicators are the key to finding out how
to avoid unnecessary wear and fuel consumption and save costs as a result.
What these indicators do for your car, PumpMeter can now do for your
pumps. Statistical analyses have revealed that most pumps do not run at
their best efficiency point. The reasons for this are often to be found in
deviations between anticipated parameters and the systems actual situation.
Benefits at a glance.
PumpMeter calculates the differential pressure and estab- A load profile is established in the course of the pumps
lishes the pumps operating point by measuring the operation using all data compiled, and information is
pumps suction and discharge pressure around the clock. provided on the pumps actual operating mode. You then
The measured and calculated values are shown in alter- have the chance to implement optimisation measures
nation on a user-friendly display. A typical pump curve and save costs.
graph shows you where your pump is currently operating.
PumpMeter
Interpretation of current operating point
display
Optimisation required
Low flow.*
in the long term.
Our KSB experts will help you interpret the operating data displayed and will show you how to
make optimal use of potential energy savings.
*Depending on the characteristic curve type, no differentiation is made between the curve's first two quarters, i.e. during
low-flow operating conditions, and the corresponding segments of the pump curve are displayed at the same time.
5
The extra benefit: PumpMeter is more favourably priced than conventional measuring equipment*.
PumpMeter continuously analyses your pumps operating Retrofitting PumpDrive is straightforward: PumpMeter
data and, in so doing, establishes its energy saving poten- provides all parameters needed to employ PumpDrive;
tial. If the energy efficiency icon (EFF) is displayed, it this, in combination with the new Plug&Pump principle,
means that your pump could significantly benefit from greatly simplifies PumpDrives parameterisation.
measures to save energy. Employing the PumpDrive
variable speed system might be an appropriate option.
PumpMeter
Load profile (examples) Recommendation
display
No action required.
Operation at or
The pump runs at its best
around the BEP.
efficiency point.
A KSB expert is on hand to give you detailed information on measures to increase the energy efficiency of your pump:
from simply retrofitting a PumpDrive to providing a comprehensive analysis of the entire system via KSBs SES (System
Efficiency Service)*: Get in contact we would be pleased to provide more information.
PumpMeter comes mounted to the pump as standard The connection of PumpMeter to your process control
making commissioning straightforward. (The pump can system using standardised interfaces allows you to have
be optionally ordered without PumpMeter.) central access to relevant data.
KSB Aktiengesellschaft
Johann-Klein-Strae 9
67227 Frankenthal (Germany)
www.ksb.com