Sunteți pe pagina 1din 21

Router/repetidor WiFi

de alto alcance
COM-860
Gracias por la compra de este producto Steren.
Este manual contiene todas las indicaciones necesarias para manejar su
nuevo Router/repetidor WiFi de alto alcance.
Por favor, revselo completamente para estar seguro de cmo utilizar
apropiadamente el producto.
Para apoyo, compras y todo lo nuevo que tiene Steren,
visite nuestro sitio web:
www.steren.com
La operacin de este equipo est sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su operacin
no deseada.

La informacin que se muestra en este manual sirve nicamente


como referencia sobre el producto. Debido a actualizaciones pueden
existir diferencias.
Por favor, consulte nuestra pgina web (www.steren.com) para
obtener la versin ms reciente del instructivo.

2
IMPORTANTE

No use ni almacene este equipo en lugares donde existan goteras o salpicaduras


de agua. Puede causar un mal funcionamiento o choque elctrico.
No coloque objetos pesados sobre el equipo, ni sobre sus accesorios.
No exponga el equipo a temperaturas extremas.
Compruebe que la electricidad en el lugar donde quiere instalar el Router es
estable.
La electricidad inestable puede provocar averas en el router o daarla
gravemente.
No exponga el equipo ni sus accesorios al polvo, humo o vapor.

El router de doble banda de transmisin puede funcionar tambin como


punto de acceso y repetidor de seal, con la capacidad de trabajar de forma
simultnea en las dos bandas o frecuencias (2,4 GHz y 5,8 GHz) sin disminuir
su tasa de transferencia y ancho de banda, gracias a su diseo con 2 antenas
de transmisin y recepcin por banda.
Tiene jacks RJ45 para ser usado con cables si es necesario, y para la funcin
de punto de acceso, cumple con los protocolos estndar de autentificacin y
seguridad, con botn para activar/desactivar funcin WPS.
Puede usarse para compartir una conexin de Internet e interconectarse con
dispositivos de menor velocidad o estndar anteriores.

3
CONEXIN DE HARDWARE
1. Conecte el puerto WAN del ruteador al puerto LAN del mdem usando un
cable Ethernet.

2. Conecte la computadora a cualquier puerto LAN del ruteador.

3. Inserte el adaptador de corriente al ruteador y a un tomacorriente. Encienda


el ruteador.

4. Apague el mdem por al menos 15 segundos y vuelva a encenderlo.

MODEM

LINEA
LAN4
LAN3
LAN2
LAN1
Default
WAN PWR
WPS

4
CONFIGURACIN RPIDA
1. Configure la direccin IP de la red como Automtica siguiendo la secuencia
de imgenes que se muestra a continuacin:
Esquina inferior derecha
de la pantalla.

a Clic derecho

b
Abrir redes y recursos compartidos

Estado de Ethernet

c
* Puede aparecer Conexin de rea local.

d
5
e Doble clic

Descripcin

Propiedades:Protocolo de Internet versin 4(T...

6
2. Abra su navegador y escriba la direccin 192.168.1.1 para entrar a la
configuracin.

3. En la parte superior, seleccione el tipo de conexin a Internet (DHCP, Static o


PPPoE). Si necesita ayuda, pngase en contacto con su proveedor de servicio.

4. En la parte inferior puede asignar un nombre (SSID) y contrasea (Password)


para las redes de 2,4 y 5,8 GHz. Los nombres predeterminados son: steren_2_4G
y steren_5G, la contrasea por defecto es: password.

7
5. Si necesita entrar a la configuracin avanzada, presione el botn Advanced.

Para regresar a la configuracin de inicio, con el ruteador encendido,


mantenga presionado el botn Default de la parte posterior por 10
segundos y despus sultelo. El ruteador se reiniciar con los ajustes de
fbrica.

ESPECIFICACIONES
Estndares: IEEE 802,11 a/b/g/n, IEEE 802,3 10Base-T IEEE 802,3u 100
Base-TX

Tasa mxima de transferencia: 2,4 y 5,8 GHZ 300+300 Mbps de forma


simultnea

Rango de frecuencia de operacin: 2, 4-2,4835 GHz y 5-5,825 GHz

Potencia mxima de transmisin: 20 dBm (mx.)

Tasa de transferencia 802,11n 40 MHz (hasta 300 Mbps) y en 20 MHz (144


Mbps); 802,11g (hasta 54 Mbps); 802,11b (11 Mbps)

Modo de configuracin inalmbrica: AP, WDS, AP+WDS, Repetidor,


Cliente, Mltiple AP.

8
Seguridad en modo inalmbrico: 64/128-bit WEP
WPA-PSK/WPA2-PSK(TKIP)
SSID habilitacin/deshabilitacin
Filtro de conexin por MAC Address
Interface: 1*10/100 M Auto MDI/MDIX RJ45 WAN port
4*10/100M Auto MDI/MDIX RJ45 LAN port
LED: PWR, WPS, SYS 2,4 GHz 5,8 GHz, WLAN, LAN1-LAN4.
Antena: 4* externas 5 dBi de ganancia

Soporta: DHCP (IP dinmica), PPPoE, IP esttica, WISP, UPnP, DMZ,


FTP puertos privados, PPTP, L2TP. IPSEC, DDNS, ruteo esttico, WOL,
administracin remota

Alimentacin: 12 V- - - 1 A

Convertidor de voltaje

Alimentacin: 100-240 V~ 50/60 Hz 15 W

Salida: 12 V- - - 1 A

Consumo: 8 W/h

Consumo en espera: No aplica

El diseo del producto y las especificaciones pueden cambiar sin


previo aviso.
9
Producto: Router/repetidor WiFi de alto alcance
Modelo: COM-860
Marca: Steren
PLIZA DE GARANTA
Esta pliza garantiza el producto por el trmino de un ao en todas sus partes y mano de obra, contra
cualquier defecto de fabricacin y funcionamiento, a partir de la fecha de entrega.

CONDICIONES
1.- Para hacer efectiva la garanta, presente esta pliza y el producto, en donde fue adquirido o en
Electrnica Steren S.A. de C.V.
2.- Electrnica Steren S.A de C.V. se compromete a reparar el producto en caso de estar defectuoso sin
ningn cargo al consumidor. Los gastos de transportacin sern cubiertos por el proveedor.
3.- El tiempo de reparacin en ningn caso ser mayor a 30 das, contados a partir de la recepcin del
producto en cualquiera de los sitios donde pueda hacerse efectiva la garanta.
4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, as como hacer vlida esta
garanta es en cualquiera de las direcciones mencionadas posteriormente.

ESTA PLIZA NO SE HAR EFECTIVA EN LOS SIGUIENTES CASOS:


1.- Cuando el producto ha sido utilizado en condiciones distintas a las normales.
2.- Cuando el producto no ha sido operado de acuerdo con el instructivo de uso.
3.- Cuando el producto ha sido alterado o reparado por personal no autorizado por Electrnica Steren S.A.
de C.V.
El consumidor podr solicitar que se haga efectiva la garanta ante la propia casa comercial donde adquiri
el producto. Si la presente garanta se extraviara, el consumidor puede recurrir a su proveedor para que le
expida otra pliza, previa presentacin de la nota de compra o factura respectiva.
ELECTRNICA STEREN S.A. DE C.V.
DATOS DEL DISTRIBUIDOR Camarones 112, Obrero Popular, 02840, Del.
Nombre del Distribuidor __________________________ Azcapotzalco, Mxico, D.F. RFC: EST850628-K51
Domicilio ______________________________________ STEREN PRODUCTO EMPACADO S.A. DE C.V.
Producto ______________________________________ Bilogo Maximino Martnez No. 3408 Int. 2, 3 y 4, San
Marca ________________________________________ Salvador Xochimanca, Del. Azcapotzalco, Mxico, D.F.
Modelo _______________________________________ 02870,
Nmero de serie ________________________________ RFC: SPE941215H43
Fecha de entrega ________________________________ ELECTRNICA STEREN DEL CENTRO, S.A. DE C.V.
Rep. del Salvador 20 A y B, Centro, 06000, Del.
En caso de que su producto presente alguna Cuauhtmoc, Mxico. D.F. RFC: ESC9610259N4
falla, acuda al centro de distribucin ms ELECTRNICA STEREN DE GUADALAJARA, S.A.
cercano a su domicilio y en caso de tener alguna Lpez Cotilla No. 51, Centro, 44100, Guadalajara, Jal.
duda o pregunta por favor llame a nuestro Centro RFC: ESG810511HT6
de Atencin a Clientes, en donde con gusto le ELECTRNICA STEREN DE MONTERREY, S.A.
atenderemos en todo lo relacionado con su Coln 130 Pte., Centro, 64000, Monterrey, N.L. RFC:
producto Steren. ESM830202MF8
ELECTRNICA STEREN DE TIJUANA, S.A. de C.V.
Centro de Atencin a Clientes Calle 2a, Jurez 7636, Centro, 22000, Tijuana, B.C.N.
01 800 500 9000 RFC: EST980909NU5
10
Long range WiFi router/repeater
COM-860

Thank You on purchasing your new Steren product.

This manual includes all the feature operations and troubleshooting necessary
to install and operate your new Sterens Long range WiFi router/repeater.

Please review this manual thoroughly to ensure proper


installation and operation of this product. For support, shopping,
and everything new at Steren, visit our website:

www.steren.com
The operation of this equipment is subject to the following two
conditions: (1) it is possible that this equipment or device may not
cause harmful interference, and (2) this device or device must accept
any interference, including interference that may cause undesired
operation .

The instructions of this manual are for reference about the product. There may
be differences due to updates.

Please check our website (www.steren.com) to obtain the latest version of the
instruction manual.

2
IMPORTANT
Do not use or store this equipment in places where there are dripping or
splashing of water. It may cause electric shock or malfunction.

Do not place heavy objects on the device or its accessories.

Do not expose the equipment to extreme temperatures.

Verify that the electricity in the place where you want to install the
Router unit is stable.

Unstable electricity can cause damage to the unit or cause serious


damage.

Do not expose the device or its accessories to dust, smoke or steam.

HIGHLIGHTS
The double band router can be used as access point and signal repeater,
and it works in two frequencies (2.4GHz and 5.8 GHz) at the same time.
It has two antennas for signal reception and other two for signal transmission,
per band. It includes RJ45 jacks in case you need to plug in cables, and
for the access point function supports authentication and security standard
protocols, also, it includes a WPS button.
It can share an internet connection and interconnect it with devices with less
speed or older standards.

3
CONNECTING HARDWARE
1. Connect the WAN port on the router to the LAN port of the modem using an
Ethernet cable.

2. Connect the computer to any LAN port on the router.

3. Insert the power adapter to the router and an electrical outlet. Turn on the
router.

4. Turn off the modem for at least 15 seconds and then turn it on again.

MODEM

LINEA
LAN4
LAN3
LAN2
LAN1
Default
WAN PWR
WPS

4
QUICK SETUP
1. Configure the IP address of the network as Automatic, follow the next image
sequence:
Lower right screen
corner.

a Right click

c
* Could be Local area network.

d
5
e Double click

6
2. Open your browser and enter the address 192.168.1.1 to enter the
configuration.

3. At the top, select the type of connection to the Internet (DHCP, Static, or
PPPoE). If you need assistance, please contact your service provider.

4. At the bottom you can assign a name (SSID) and password for 2.4 and 5.8
GHz networks. The default names are: steren_2_4G and steren_5G, the default
password is: password.

7
5. If you need to go to advanced settings, press the Advanced button.

To return to the factory configuration, with the router on, press and
hold the Default button on the back for 10 seconds, then release it. The
router will reboot with the default settings.

SPECIFICATIONS
Standards: IEEE 802.11 a/b/g/n, IEEE 802.3 10Base-T IEEE 802.3u
100Base-TX
Maximum data transfer rate: 2.4 and 5.8 GHz 300+300 Mbps at the same
time
Operating frequency range: 2.4-2.4835 GHz and 5-5.825 GHz
Maximum transmission power: 20 dBm (max.)
Transfer rate 802.11n 40 MHz (up to 300 Mbps) and 20 MHz (144 Mbps);
802.11g (up to 54 Mbps); 802.11b (11 Mbps)
Wireless configuration mode: AP, WDS, AP+WDS, Repeater, Client,
Multiple AP.

8
Security in Wireless mode: 64/128-bit WEP
WPA-PSK/WPA2-PSK(TKIP)
SSID enable / disable
Connection filter by MAC Address
Interface: 1*10/100 M Auto MDI/MDIX RJ45 WAN port
4*10/100M Auto MDI/MDIX RJ45 LAN port
LED: PWR, WPS, SYS 2.4 GHz 5.8 GHz, WLAN, LAN1-LAN4.
Antenna: 4* external 5 dBi gain

Supports: DHCP (dynamic IP), PPPoE, IP estatic, WISP, UPnP, DMZ, FTP
private ports, PPTP, L2TP. IPSEC, DDNS, estatic routing, WOL, remote
management

Input: 12 V- - - 1 A

Power converter

Input: 100-240 V~ 50/60 Hz 15 W

Output: 12 V- - - 1 A

Consumption: 8 W/h

Stand-by power consumption: does not apply

Product design and specifications are subject to change, without notice.

9
Product: Long range WiFi router/repeater
Part number: COM-860
Brand: Steren
WARRANTY

This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year from the date of purchase.
CONDITIONS

1. This warranty card with all the required information, invoice, product box or
package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was
received.
4. Steren sell parts, components, consumables and accessories to customer, as well
as warranty service, at any of the addresses mentioned later.

THIS WARRANTY IS VOID IN THE NEXT CASES:

If the product has been damaged by an accident, acts of God, mishandling, leaky
batteries, failure to follow enclosed instructions, improper repair by unauthorized
personnel, improper safe keeping, among others.

a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.

RETAILER INFORMATION
Name of the retailer In case your product fails
Address or have questions, please
Product contact your nearest dealer.
Brand If you are in Mexico, please
Part number call to our Call Center.
Serial number 01 800 500 9000
Date of delivery
10

S-ar putea să vă placă și