Documente Academic
Documente Profesional
Documente Cultură
S1
F1
+Ue
ALARM
-Ue
PE
+U1
5 VDC
-U1
+U2
24 VDC
-U2
Characteristics
Application The power supply unit 560PSU02 has the following character-
istics and functions:
The power supply unit 560PSU02 generates the two supply volt- Potential isolation between the input and the outputs
ages (5 V DC and 24 V DC) for the RTU560 subracks 560MPR03 Cooling by natural convection
and 560SFR02. The output power is sufficient to supply a sub- Electronic power limitation on outputs
rack with up to 8 communication units (CMU). Short-circuit proof outputs
Over-voltage protection of the input
It is possible to configure redundant power supplies for project Reverse voltage protection of the input
configurations with higher requirements to availability. In this con- Parallel operation with monitoring of redundant power sup-
figuration two power supply units 560PSU02 are operating in ply configuration
parallel mode. They are able to take over the full load, if one pow- Controlled load balancing in redundant operation
er supply fails. Only power supplies of the same type and rubric LEDs for monitoring the output voltages
should be used for redundant operation. Alarm indication in case of failure
Tolerant on input voltage interuptions up to 50 ms
The input voltage of the power supply unit is 48... 220 V DC.
Technical data Connection type
Fuse F1 = 4 A T
Ordering information
Efficiency: 74% @ 48...110 V DC
560PSU02 R0001 1KGT011900R0001
External circuit-breaker The plus lead needs a be protected by
a circuit-breaker upstream with 10 A
trip current.
Output
Output U1
Voltage 5.1 V DC
Current min. 0A
Current max. 15 A
Output U2
Voltage 24 V DC
Current min. 0A
Mechanical layout
68128 Mannheim, Germany poses and shall in no respect be binding. The Brochure does not claim to be ex-
haustive. Technical data in the Information are only approximate figures. We re-
www.abb.com/substationautomation serve the right at any time to make technical changes or modify the contents of
this document without prior notice. The user shall be solely responsible for the
use of any application example or information described within this document.
The described examples and solutions are examples only and do not represent
any comprehensive or complete solution. The user shall determine at its sole
discretion, or as the case may be, customize, program or add value to the ABB
products including software by creating solutions for the end customer and to
assess whether and to what extent the products are suitable and need to be ad-
justed or customized.
ABB AG reserves all rights in particular copyrights and other intellectual property
rights. Any reproduction, disclosure to third parties or utilization of its contents -
in whole or in part - is not permitted without the prior written consent of ABB AG.