Sunteți pe pagina 1din 1

501-19-1 Bumpers 501-19-1

REMOVAL AND INSTALLATION


Bumper Cover Rear, Sport Trac 4. CAUTION: To avoid damaging the
rear bumper cover, do not twist the cover
1. Remove the 6 rear bumper cover screws. when removing.
To install, tighten to 6 Nm (53 lb-in). Remove the bumper cover.
Pull the outer corners outward and pull the
2. Remove the 6 rear bumper cover splash shield bumper cover rearward to disengage the
screws (3 each side). cover from the retaining clips.

3. Disconnect the license plate electrical 5. Transfer the components as necessary.


connector.
6. To install, reverse the removal procedure.

Copyright 2007, Ford Motor Company


Last updated: 6/21/2007 2008 Explorer, Mountaineer, Explorer Sport Trac, 7/2007

S-ar putea să vă placă și