Documente Academic
Documente Profesional
Documente Cultură
1. General
The general announcement system shall facilitate announcement / paging over a
number of loudspeakers distributed judiciously all over the plant complex.
2. Design feature
The system shall be central amplifier type. The amplifiers shall be located in the
CONTROL ROOM premises and the announcement points shall also be installed
in the in plant control room.
The amplifier shall have the capacity of suitable output power inclusive of 50%
stand-by capacity.
The announcement / paging shall normally be made from the main plant control
rooms with provision of a second announcement point in the Shop in charge's
office.
The loudspeakers shall be operated group wise or all at a time depending upon
the requirement.
The system having the requisite number of loudspeakers shall be provided for the
plant complex for announcement of instructions and smooth flow of information
between process points.
3. System feature
The general announcement system shall ensure quality performance using the
latest technology in design and manufacture of audio equipment.
The system shall facilitate near total reproduction of original speech or music and
shall guarantee trouble free operation.
The system shall adopt modular construction. The amplifier rack shall be provided
with input and output terminals, plated and tinned for good contacts.
Suitable protection of the system against accidental wrong connection, over loading,
short circuit etc. shall be provided.
The equipment shall be suitable for operation from 240V +/- 10%, 50Hz +/- 5%,
Single phase, AC mains power supply. The power supply equipment shall be
provided with protections against short circuit, over voltage, under voltage &
transients.
4. Equipment details
Each of the system shall broadly consist of but not limited to the following:
Microphone assembly
Loudspeakers (re entrant horn type / indoor box type) complete with mounting
accessories such as poles, mounting brackets.