Documente Academic
Documente Profesional
Documente Cultură
S1
+Ue
ALARM
-Ue
PE
+U1
5 VDC
-U1
+U2
24 VDC
-U2
Characteristics
The power supply unit 560PSR00 has the following character-
Application istics and functions:
Potential isolation between the input and the outputs
The power supply unit 560PSR00 generates the two supply volt- Cooling by natural convection
ages (5 V DC and 24 V DC) for the RTU560 subracks 560MPR03 Electronic power limitation on outputs
and 560SFR02. The output power is sufficient to supply a sub- Short-circuit proof outputs
rack with up to 4 communication units (CMU). Over-voltage protection of the input
Reverse voltage protection of the input
It is possible to configure redundant power supplies for project Parallel operation with monitoring of redundant power sup-
configurations with higher requirements to availability. In this con- ply configuration
figuration two power supply units 560PSR00 are operating in Controlled load balancing in redundant operation
parallel mode. They are able to take over the full load, if one pow- LEDs for monitoring the output voltages
er supply fails. Only power supplies of the same type and rubric Alarm indication in case of failure
should be used for redundant operation. Tolerant on input voltage interuptions up to 50 ms
Input
Output U2
Voltage 24 V DC
Current min. 0A
Mechanical layout
Connection type
68128 Mannheim, Germany poses and shall in no respect be binding. The Brochure does not claim to be ex-
haustive. Technical data in the Information are only approximate figures. We re-
www.abb.com/substationautomation serve the right at any time to make technical changes or modify the contents of
this document without prior notice. The user shall be solely responsible for the
use of any application example or information described within this document.
The described examples and solutions are examples only and do not represent
any comprehensive or complete solution. The user shall determine at its sole
discretion, or as the case may be, customize, program or add value to the ABB
products including software by creating solutions for the end customer and to
assess whether and to what extent the products are suitable and need to be ad-
justed or customized.
ABB AG reserves all rights in particular copyrights and other intellectual property
rights. Any reproduction, disclosure to third parties or utilization of its contents -
in whole or in part - is not permitted without the prior written consent of ABB AG.