Documente Academic
Documente Profesional
Documente Cultură
PART A
4. Why the longitudinal riveted joints for boiler shells are double strap butt joints and
PART-B
5 Design a double riveted lap joint for circumference of a pressure vessel of 110 cm inner
diameter to carry a pressure of 1 MPa. The permissible stress for plate and rivet materials
in tension, shear, and compression can be taken as 80, 60 and 120 MPa respectively.
Design the joint and determine efficiency. Efficiency of longitudinal joints can be taken
as 85 % and corrosion allowance as 1 mm.
P.T.O
7. A bracket attached to a steel plate by means of nine identical rivets as shown. Determine
(2x15=30 marks)