Documente Academic
Documente Profesional
Documente Cultură
Training Programs:
Mobile Crane . . . . . . . . . . . . . . . . . . . . . .5-7, 9
Boom Truck . . . . . . . . . . . . . . . . . . . . . . . . . .8
Tower Crane . . . . . . . . . . . . . . . . . . . . . . . . .10
Overhead Crane . . . . . . . . . . . . . . . . . . . . . .11
Rigger/Signalperson . . . . . . . . . . . . . . . . .12-13
Aerial Lift . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Forklift . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Train-The-Trainer . . . . . . . . . . . . . . . . . . . . .16
Products:
Safety Training Videos . . . . . . . . . . . . . . .17-19
Field Guides/Handbooks/Manuals . . .20-21, 23
Standards & Checklists . . . . . . . . . . . . . . . . .22
Crane & Lift Equipment Models . . . . . . . .24-25
Safety Cards & More . . . . . . . . . . . . . . . .26-29
Operator Re-Certification CIC prep training and written and practical exams can
also be administered on-site at your facility (see pages
Re-certification is available to operators currently certificated 6 & 7). For more information call (800) 832-2726.
through an accredited program. For your convenience written or
online re-certification exams are available at multiple locations in
virtually every community nationwide.
Written & Practical Exam Dates CIC prep training and written and practical exams can
Crane Institute of America is a CIC-approved test site that adminis- also be administered on-site at your facility (see page
ters written and practical exams for rigger/signalpersons at our 12). For more information call (800) 832-2726.
Orlando facility.
Training: CIC Certification:
July 20
January 26
February 23 August 24 Coming Soon!
March 23 September 14
April 20 October 19
Advanced Rigger and Lift Director accredited certifications are
May 18 November 16 currently being developed and will be available in 2010.
June 22 December 14
MOBILE CRANES BOOM TRUCKS OVERHEAD CRANES GANTRY CRANES & HOISTS
MARINE/OFFSHORE CRANES PEDESTAL CRANES RIGGING
AERIAL LIFTS FORKLIFTS TRAIN-THE-TRAINER
2 Days $595
CRANES AND RIGGING COVERED
Telescoping Boom Cranes
Lattice Boom Cranes
Boom Trucks
Industrial Cranes
Construction and Industrial Rigging
TOPICS COVERED
Managements role in hazard awareness, elimination & mitigation.
Why Cranes present such potential for accidents.
How to reduce your liability exposure.
Understanding how cranes have changed.
How to interpret load charts.
Selecting operational aids.
Inspection requirements and record keeping.
How to set-up a crane inspection program.
New ASME document on owner, user, supervisor, lift director, and
operator responsibilities.
How to train and certify your crane operators.
2010 Schedule Applying OSHA and ASME standards to your workplace.
Where we stand on OSHAs new operator certification requirement.
Houston, TX Jan. 12-13 Salt Lake City, UT July 13-14 Hoisting personnel with cranes.
Pittsburgh, PA Feb. 2-3 Nashville, TN Aug. 3-4 The most common unsafe crane and rigging practices.
Chicago, IL March 9-10 Orlando, FL Sept. 20-21
Rigging equipment and procedures.
Orlando, FL March 15-16 Dallas, TX Sept. 21-22
How to plan a critical lift.
Birmingham, AL April 13-14 Baton Rouge, LA Oct. 19-20
New York City, NY May 11-12 Orlando, FL Nov. 1-2
Milwaukee, WI June 15-16 Charlotte, NC Nov. 9-10 YOU WILL RECEIVE
Orlando, FL June 21-22 Newark, NJ Dec. 14-15
Managing Crane Safety workbook
Mobile Cranes handbook
Rigging handbook
Crane safety reference card
22
Rigging safety reference card
Safety decal
Hoisting personnel safety reference card
Applicable OSHA and ASME standards
Years of Pre-operational inspection checklists
3 Days $895
Free Operator Qualification Certificate!
YOU WILL LEARN
Causes & results of mobile crane accidents.
Types, components & terminology of mobile cranes.
How mobile cranes are rated.
How to interpret and use load charts.
Pre-lift considerations.
Set-up and site considerations.
Safe operating practices and procedures.
ASME B30.5 - operator, rigger, and supervisory responsibilities.
How to perform pre-operational inspections.
How to conduct pick & carry operations safely.
How to prepare for a critical lift.
Procedures for boom/jib assembly/disassembly.
Correct hand signals & responsibility of signalpersons.
Procedures for safely working cranes near power lines.
How to comply with OSHA when hoisting personnel with mobile cranes.
Basic rigging procedures: wire rope, slings, hardware, lifting devices, etc.
Simulator Training Included
with all Orlando Classes
2010 Schedule YOU WILL RECEIVE
Anchorage, AK Jan. 5-7 Guam June 7-9 Mobile Crane Safety workbook
Orlando, FL Jan. 11-13 San Antonio, TX June 8-10
Mobile Cranes handbook
Las Vegas, NV Jan. 12-14 Orlando, FL June 14-16
Denver, CO Jan. 19-21 Orlando, FL July 12-14
Rigging handbook
Pittsburgh, PA Jan. 26-28 Baltimore, MD July 13-15 Rigger's capacity card
Orlando, FL Feb. 1-3 Savannah, GA July 20-22 Hand signal card
Seattle, WA Feb. 2-4 Kansas City, KS July 27-29 Safety decals
Minneapolis, MN Feb. 9-11 Charlotte, NC July 27-29
Certificate of training
Houston, TX Feb. 16-18 Orlando, FL Aug. 2-4
Nashville, TN Feb. 23-25 Milwaukee, WI Aug. 10-12 Operator qualification card, if applicable
Chicago IL March 2-4 Philadelphia, PA Aug. 31-Sept. 2
Orlando, FL March 8-10 Houston, TX Aug. 31-Sept. 2
Charleston, WV March 9-11 Nashville, TN Sept. 14-16
St. Louis, MO March 16-18 Orlando, FL Sept. 20-22
Phoenix, AZ March 23-25 Columbus, OH Sept. 21-23
Sacramento, CA April 6-8 Portland, OR Sept. 28-30
Albuquerque, NM April 13-15 Baton Rouge, LA Oct. 5-7
Orlando, FL April 19-21 Orlando, FL Oct. 11-13
Birmingham, AL April 20-22 Birmingham, AL Oct. 12-14
Salt Lake City, UT April 20-22 Orlando, FL Nov. 8-10 An operator qualification certificate is available to those operators who
Newark, NJ April 27-29 Atlanta, GA Nov. 16-18
Little Rock, AR May 4-6
meet the physical, written and experience requirements.
Buffalo, NY Nov. 30-Dec. 2
Orlando, FL May 10-12 Orlando, FL Dec. 6-8
Tulsa, OK May 11-13 Dallas, TX Dec. 7-9
Honolulu, HI May 25-27
HANDS-ON
Pre-operational inspection
Proper boom truck setup
How to install & reeve load blocks & headache balls
Principles of boom truck operation
How to control load swing
Safety devices & operational aids
How to stow & erect extensions & jibs
Start-up and shutdown
4 Days $995
program, operators and inspectors will meet the
OSHA and ASME competency and qualification
requirements.
2 Days $595
Nationally Accredited
CIC Rigger/Signalperson
Certification - Introductory Offer $99
YOU WILL LEARN
How to properly use wire rope, chain and synthetic web slings,
rigging hardware, and lifting devices.
How to interpret capacity charts for wire rope, slings and rigging
hardware when performing proof test.
The three methods used to calculate sling loading.
Safe rigging practices and procedures.
The correct way to give ASME hand signals & voice signals.
ASME responsibilities of signalpersons.
Procedures for safely working cranes near power lines.
How to interpret and comply with OSHAs steel erection standard.
How to comply with OSHA requirements when hoisting personnel
with cranes.
How to perform a pre-use inspection on wire rope, chain and
synthetic web slings, hooks, shackles, eye bolts, hoist rings,
2010 Schedule turnbuckles, spreader/lifting beams, load blocks, sheaves, etc.
How to determine the weight of a load.
Orlando, FL Jan. 25-26 Orlando, FL July 19-20
Orlando, FL Feb. 22-23 Orlando, FL Aug. 23-24 How to prepare a lift plan.
Orlando, FL March 22-23 Orlando, FL Sept. 13-14 How to properly use hoists, chain falls and come-alongs.
Orlando, FL April 19-20 Orlando, FL Oct. 18-19
Orlando, FL May 17-18 Orlando, FL Nov. 15-16
Orlando, FL June 21-22 Orlando, FL Dec. 13-14
YOU WILL RECEIVE
*Rigger/Signalperson & Rigging Equipment Inspector (pg. 13)
programs are scheduled on consecutive days so you can attend Rigging Safety
both programs in one week! workbook
Rigging handbook
Rigging safety reference
card
Riggers capacity card
Overhead crane hand
signal card
Sheave gauge
Safety decals
Coming Soon! Certificate of Training
Advanced Rigger and Lift Director certifications are Rigger qualification card,
currently being developed and will be available in 2010. if applicable.
TECHNICAL TOPICS
Equipment components & terminology
Safe practices & accident prevention
Inspection procedures & record-keeping
Applicable OSHA, ITSDF, ANSI & ASME standards
Load charts & calculating equipment capacities (where applicable)
Also included are topics specific to individual programs & equipment.
See p. 5-15 for details.
Hands-On Training in our mobile crane & rigging programs
$205 Each for All Seven! Pre-Op Inspection for Telescoping Boom
Deduct $10.00 for VHSs Cranes
SKU # vid04 dvd04 20 minutes
FREE Mobile Cranes Pre-operational inspection is the first job of the day and maybe the most
handbook with the important. Following OSHA and ANSI guidelines, this video covers the
purchase of one or more inspection of control functions and operational aids, booms, jibs, wire
of our crane safety rope, and other critical components of telescoping boom cranes.
DVDs or VHSs.
A $29.95 value! Setup for Safety
FREE Rigging handbook with SKU # vid03 dvd03 20 minutes
the purchase of one or more More than fifty percent of all mobile crane accidents are attributed to improper
of our rigging DVDs setup. This video covers the important areas of crane setup, which include
or VHSs. site preparation, blocking under outriggers, use of mats for soft surfaces and
A $19.95 value! how to level the crane. A highlight is the animated section illustrating how the
crane and load weight impose force on the ground.
Filmed under the guidance of professional riggers, these tips are the SKU # vfpack: 3 Videos & CD $395
result of years of experience. After a quick review of the basics, this OR 4 CDs $500
video offers tips on how to estimate the weight and center of gravity for Package Contents: (can be purchased individually)
large or odd shaped loads. Topics covered: analyzing loads the big
picture, determining load weight, sling placement, lift points, odd SKU # vfvid - Forklift 2000 Video - 60 min. $245
shaped loads, productivity and safety tips. 26 minutes Engineering principles, auto/forklift differences, load centers, lateral/longitudinal
engineering, turnovers/ tipovers, rules & maintenance.
Backhoe Loader Pre-Start Inspection
SKU # vssm - Site-Specific Modules Video - 60 min. $195
SKU # vbhlpre $195 dvbhlpre $205 dvbhlpreS $205*
Covers: carbon monoxide poisoning, electric pallet jacks, battery charging, propane
Begin at the beginning. A good daily pre-start inspection helps keep safety, pedestrians - forklifts - walkie stackers.
the machine running reliably all day long. And a good inspection
means more than pulling the dipstick and kicking the tires. Many SKU # vteop - Training For Exp. Operators Video - 16 min. $125
operators have never been taught what they really need to look for. Updates new engineering principles, technical information of new OSHA standards.
This video provides an organized way to check out the machine
before putting it to work. 12 minutes *Available in Spanish SKU # cdfwm - CD-ROM Written Materials - $95
Rigging & Lifting with Small Hydraulic Wheel Loader Walk-Around and
Cranes Introduction
SKU # vcrnrig $195 dvcrnrig $205 dvcrnrigS $205* SKU # vwalk $195 dvwalk $205
This is a very important video for anyone who is involved in rigging This walk-around video shows operators how to look for more than
loads to be lifted. Through the use of simple graphics and on-the- fluid levels and leaks, tells them why and what can go wrong if they
job demonstrations, the three basic types of hitches and several miss something. Knowing when, how and why to drain the moisture
variations are clearly shown. The effects of sling angles, rigging out of an air tank can help avoid an accident. This is a video full of
hardware, balance points, sling materials and a dozen other solid advice that even the experienced professionals need to see.
elements affecting safe rigging are graphically addressed and easily 15 minutes
understood. 26 minutes *Available in Spanish
d.
Only
$400.00
h. i.
l. m.
j.
k.
n. o. p.
q. r. s. t.
Rigger's Capacity Card An amazing collection of 110 color photos that depict the most
common types of damage as outlined by OSHA, ANSI, &
SKU # rcc13 $2.95 ASME regulations which require the rigging gears removal
3.5" x 6.25" 6 panels from service. Also included are 110 corresponding back &
white photos outlining the reason for removal.
This wallet size fold-up card contains
capacities for eye bolts, shackles and
wire rope, chain and synthetic web slings. Crane Safety Reference Card
Included are weights of common SKU # rcc14 $6.95 each
materials used on job sites and a step-by- 25-199 $5.21 each
step example of how to calculate sling 200 or more $3.48 each
loading. (min. order 10, laminated &
7" x 6.25" four panels
weatherproof, fold up)
This pocket size-fold up card is a valuable reference
guide for all operators and other personnel working
with mobile cranes. Key areas covered are crane
setup, pre-operational inspection, working near
power lines and how to interpret load charts.
Rigging Safety Reference Card Laminated, weatherproof, folds in half.
SKU # rcc16 $6.95
25-199 $5.21 each
200 or more $3.48 each
7" x 6.25" four panels Hoisting Personnel Safety
This pocket size fold-up card is a Reference Card
quick reference card to the SKU # rcc15 $4.95
important aspects of rigging. The 25-199 $3.71 each
key areas covered are wire rope, 200 or more $2.48 each
slings, hardware and rigging 3.5" x 6.25" two panels
practices. Laminated, weatherproof
folds in half. This pocket size reference card is ideal for pre-lift
meetings, training, and to help improve safety when
cranes are used to lift personnel. Covers platform
requirements, selection of rigging, trial and test lifts
and pre-lift inspection. Laminated and weatherproof.
Overhead
Crane Crane & Equipment
Hand Signal Inspection Certificate
Card Decal
SKU # dcl16 $2.95 (qty. discounts available)
SKU # hsc15 $1.50
These long-lasting full color foil decals guard
Wallet size to illustrate the
against fading and peeling. They provide clear
correct signals required
and concise documentation of OSHA and ASME
by OSHA and ANSI/ASME
crane or equipment inspections, such as forklifts
when directing the
and rigging.
operation of overhead
cranes.(min. order 10,
laminated & weatherproof)
Calipers
SKU # svg24 $16.95
Tower Crane Made of sturdy stainless steel, measures the inside
Hand Signal and outside diameter of wire rope and other
inspection items.
Card
SKU # hsc16 $1.50
Specifications:
Crane Institute of America T-Shirt Maximum Measured Speed : 67 mph
Pre-shrunk, 100% cotton. White only. Available in sizes: Small, Medium,
Large, X-Large, and XX-Large. Minimum Measured Speed : 0.44 mph
SKU # TShirtS $ 9.95 SKU # TShirtXL $ 9.95 Resolution-Wind Speed: 0.1 for All Units
SKU # TShirtM $ 9.95 SKU # TShirtXXL $12.95
Temperature Measuring Range: -21.8 to 138.2 oF/ -29.9 to
SKU # TShirtL $ 9.95 59 oC
Resolution-Temperature : 0.2oF/0.1oC
Power Requirements:
Power Requirements : 1 CR2032 Button Cell (Not Included)
Registration Free Follow-up Services PROGRAM CODES FOR ALL TRAINING PROGRAMS
Call, fax, mail or e-mail the Training program participants are Code Program Length Fee $
registration with payment to Crane automatically enrolled in our Crane ALSI Aerial Lift Safety & Inspector 3 days $795
Institute of America, Inc. Attendance Safety Hotline service for post-
at these training programs is training support and consultation. BTO Boom Truck Operator, Hands-On 5 days $1295
carefully limited. To guarantee your E-mail your technical questions to MMCS Managing (Mobile) Crane Safety 2 days $595
place, register now. Confirmation and instructors@craneinstitute.com
hotel information will follow. Visa, FLSI Forklift Safety & Inspector 3 days $795
Mastercard and American Express Cancellation Policy MCO(3) Mobile Crane Operator 3 days $895
accepted.
We appreciate at least 7 days MCO(4) Mobile Crane Operator, Hands-On 4 days $995
advance notice for cancellations. MCI * Mobile Crane Inspector 4 days $995
Accommodations
There will be a processing fee of $50
We have arranged for training for "no-shows". OCSI * Overhead Crane Safety & Inspector 4 days $995
program participants to receive R/SP Rigger/Signalperson 2 days $595
discounted room rates. When making Taxes RSI Rigging Equipment Inspector 3 days $795
room reservations, please identify
yourself as a Crane Institute of All classes held in states where state TCSI Tower Crane Operator & Inspector 4 days $995
America seminar attendee. tax is applicable are subject to state
TTAL Train-The-Trainer, Aerial Lifts 4 days $1395
tax in addition to the course fee.
TTBT Train-The-Trainer, Boom Trucks 4 days $1395
Training Program Schedule
Note: TTF Train-The-Trainer, Forklifts 4 days $1195
All training programs will begin at All hands-on programs require work TTMC Train-The-Trainer, Mobile Cranes 9 days $2295
8:00 AM and conclude at 4:00 PM. boots/shoes. Be sure to bring a
TTOC Train-The-Trainer, Overhead Cranes 4 days $1395
calculator when attending training
Certificates of Training programs. Audio and/or video TTR Train-The-Trainer, Rigging 4 days $1395
recording of programs is strictly OEX Certification for all Operator courses $95
Certificates suitable for framing are
prohibited.
awarded to all attendees who IEX Certification for all Inspector courses $295
complete the training program(s).
TEX Certification for all Trainer courses (classroom only) $345
*Sign up 2 for MCI or OCSI class and get the 3rd tuition free.
Contact:
Company:
Billing Address:
Phone Number:
Fax Number:
E-mail Address:
Florida residents add 7% sales tax. Please allow 12 - 15 business days for
Product Shipping Information (if different from Billing Information)
Alaska, Hawaii and U.S. territories add delivery.
$15.00. Standard shipping and handling prices are
Contact: Rush orders: subject to change without notice. Subtotal
Add $15 for 2-day shipping Mastercard, Visa and American Express
Add $20 for overnight shipping are accepted. 7% Sales Tax
Company: Foreign Countries - Call us directly for total If 20 or more of any MNL item is ordered, FL Residents Only
shipping amount. Your choice of UPS or S&H is 5% of the order (or actual shipping
USPS. Please specify your delivery cost). Shipping***
Shipping Address:
method. Your account will be charged
actual postage plus a handling fee. Grand Total
City, State, Zip Code:
Product Return Policy: Please note that we can **For Totals Add...
Phone Number: only offer refunds on merchandise that is returned ...Up to $50 $7.95
$50.01 to $100 $13.95
unopened, in its original packaging. A restocking
Fax Number: $100.01 to $300 $17.95
fee of 15% will be deducted from your refund. $300.01 to $500 $19.95
500.01 to $800 $22.95
E-mail Address:
You may also purchase products or register at $800.01 to $1,000 $27.95
Over $1,000 $29.95
Complete this section for payment! www.craneinstitute.com
Call: 800-832-2726 407-322-6800 Fax: 407-330-0660
REGISTRATION
PAYMENT:(Circle One) VISA MC AMEX CHECK PO** Security Code# __-__-__-__
American Express has a 4-digit security code on front/MC Visa has 3-digit code within signature strip
Credit Card Account Number: Exp. Date: Sign up 2 for Inspector Program, get 3rd tuition free!
(Mobile Crane & Overhead Crane)
Name on Card:
PLEASE PRINT OR TYPE
Signature:
Student Name Job Title Program Code* City/Dates
Check enclosed for $ made payable to Crane Institute of America, Inc
Student Name Job Title Program Code* City/Dates
Purchase Orders accepted for training programs & product orders of $100
or more. Please fax to 407 330-0660
Student Name Job Title Program Code* City/Dates
Company:
Mailing Address:
Crane Institute of America, Inc. Address:
3880 St. Johns Parkway
Sanford, FL, 32771 City: State: Zip:
Authorized by:
CRANE INSTITUTE PROMISE
*See Program Codes on Page 30
SATISFACTION GUARANTEED!
Please note: Registration/Exam fees are due prior to program start date.
Training Programs:
Mobile Crane . . . . . . . . . . . . . . . . . . . . . .5-7, 9
Boom Truck . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Tower Crane . . . . . . . . . . . . . . . . . . . . . . . . .10
Overhead Crane . . . . . . . . . . . . . . . . . . . . . . .11
Rigger/Signalperson . . . . . . . . . . . . . . . . .12-13
Aerial Lift . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Forklift . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Train-The-Trainer . . . . . . . . . . . . . . . . . . . . . .16
Products:
Safety Training Videos . . . . . . . . . . . . . . .17-19
Field Guides/Handbooks/Manuals . . . .20-21, 23
Standards & Checklists . . . . . . . . . . . . . . . . .22
Crane & Lift Equipment Models . . . . . . . .24-25
Safety Cards & More . . . . . . . . . . . . . . . . .26-29