Documente Academic
Documente Profesional
Documente Cultură
18 Weld Appearance All toes shall blend smoothly Regular along the
length
Comments :
+++recommend arc strikes are ground flush prior to MPI testing for crack detection.
2) Sentence the fillet weld dimensions using the following design criteria:
Having assessed the weld for its size an inspection can then be made on the surface to locate any
imperfections. Firstly, the report sheet requests the inspector to indicate the number of locations
that the following imperfections occur, if any?
3) The number of places that they occur should now be entered in the box as follows:
UNDERCAT APPEAR? 1 place
4) For the defects recordedstate the MAXIMUM length (and DEPTH if applicable) of each
defect
5) Then, using the code provided assess the levels of imperfections with the allowance in the
code as follows:
** All spatters should have been removed prior to submission for inspection. Clean then
re-submit for inspection
6) Finally accept or reject the weld used for your visual inspection as follows:
IS THE WELD ACCEPTABLE? YES YES/NO
Signature:
Name: ...
Date: