Sunteți pe pagina 1din 1

Quiz # 2

Instruction:
Same format with the assignment
Show your solution completely
To be submitted on Friday

Electromagnetics

1. Calculate the work done in moving a 4 C charge from B(1,0,0) to A(0,2,0) along the path y = 2 2x, z=0 in the field E =5x +
5y

100
2. Given the potential field in cylindrical coordinates, V = cos V and point P at = 3m, = 60, z = 2m. Find the value of
+1
the volume charge density in free splace( ).

3. Four 0.8 nC point charges are loacated in free space at the corners of a square 4 cm on a side. A fifth 0.8 C charge is placed
at the center of the square. Find the total potential energy stored.

4. Two slabs of material of dielectric strength of 4 and 6 and of thickness 2mm and 5 mm respectively are inserted between
the plates of a parallel plate capacitor. Find how much distance between the plates should be changed so as to restore the
potential of the capacitor to its original value.

5. The oil dielectric to be used in a parallel plate capacitor has a relative permittivity of 2.3 and the maximum working
potential gradient in the oil is not exceed 106 V/m. Calculate the approximate plate area required for a capacitance of
0.0003 F.

6. The core and lead-sheath of a single-core cable are separated by a rubber covering. The cross sectional area of the core is
16mm. A voltage of 10kV is applied to the cable. What must be the thickness of the rubber insulation if the electric field
strength in it is not exceed 6 x 106 V/m.

7. A parallel-plate capacitor is made of plates 1 m square and has a separation of 1 mm. The space between the plates is filled
with dielectric of = 25. If 1 kV potential difference is applied to the plates, find the force squeezing the plates together.

8. A 3.0-F capacitor charged to 40 V and a 5.0-F capacitor charged to 18 V are connected to each other, with the positive
plate of each connected to the negative plate of the other. What is the final charge on the 3.0-F capacitor?

9. Determine the equivalent capacitance of the combination shown when C = 24 F.

10. Determine the energy stored in C2 when C1 = 15 F, C2 = 10 F, C3 = 20 F, and V0 = 18 V.

S-ar putea să vă placă și