Documente Academic
Documente Profesional
Documente Cultură
DENTAL LAB
FREEDOM OF CHOICE.
SIRONA.COM
OVERVIEW 02 I 03
inLab
CAD/CAM with inLab now you have freedom of choice for scanning, In addition, with Sirona Connect you have access to the largest installed
designing and fabrication. Your dental lab is all set for the future with new base of digital intraoral impression systems. inLab is open and STL
high-performance inLab components. Scanners, software and production interfaces permit flexibility when integrating existing CAD/CAM solutions
units are now optimally coordinated and even more in tune with dental for independent and cost-efficient production processes. Enjoy every day.
technician requirements. Together, they ensure the greatest variety of With Sirona.
materials for a broad range of indications and user-friendly applications.
Scan from page 04 infiniDent from page 22
inEos X5 one scanner, all options. Central production.
inEos X5
ONE SCANNER, ALL OP TIONS.
inEos X5 allows you to make scans for all indications and is your specialist
for every digitization task. The scanner combines simple operation with
specific scanning strategies. It ensures flexible positioning of models and
TOP TECHNOLOGY
MADE IN GERMANY.
INTELLIGENT SCANNING TECHNOLOGY
The inEos X5 ensures precise digital complete freedom of use.
The high-precision scanning element registration of all indication types with
of the inEos X5 was developed its robot arm, unique 5-axis scanning
specifically for dental applications. It technology combined with large working
provides outstanding accuracy and area. Preparations are clearly visible.
highest depth of field. All scanner
components were developed in
Germany and produced according to
strict quality standards.
NEW: Implants. Using the new one-piece scanbody NEW: Triple-tray scan. The lower and upper jaws NEW: Texture scan. Visual support for example of
implant positions can be determined with a high together with the bite registration can be scanned a metal cast design in inLab software.*
degree of precision even for long-span screw from a triple-tray impression tray for smaller jobs.*
retained implants.*
Scanning in record time. Whole jaw models are Impression scan. The inEos X5 scans many Large operating range. Allows positioning of most
digitized in less than 60 seconds using the large different shapes and sizes of impression trays common articulators and gives fast, unobstructed
scanning field. with no difficulty. access to the scan object.
Multi-die scanning. Up to four prepared stumps Manual scanning. Smaller jobs with only a few Open scanner. The model data collected with
are scanned fully automatically and inserted into preparations can be scanned quickly and inEos X5 can be exported as STL.
the digital model with no manual interaction. efficiently using manual mode.
* Prerequisite: inLab SW 15.0; Screw retained bridges and bars coming soon.
SCANNING inEos X5 06 I 07
inEos X5 inEos X5
HIGH PRECISION. SIMPLE.
inEos X5 was developed by Sirona according to the highest quality NE W
standards for optical measuring systems. After a short period of time it
is already established on the market as the reference scanner. inEos X5
ensures greatest accuracy for all dental technician digitization work
from the palate to the tip of the scanbody.
Triple-tray scan. Benefit from the fully digital Maximum control. Supplement the images
process the short time from preparation through generated by the fully automatic scan technology
scanning bite registration impression trays to the with user-specific views. Use the click-to-scan
NE W final restoration.* function to capture all areas of the model as
desired.
NEW: inPost* NEW: SCAN WORKFLOW
The new one-piece scanbody is made The new scan strategy for long-span
with high precision and its coating and screw retained implants with inEos X5
shape are optimally compatible to the determines the position and angle of the
special optics of inEos X5. implant position with great accuracy.
Intuitive user interface. A digital model with just Wide range of accessories. Experience inEos X5
a few clicks. The intuitive user interface of with its custom accessories for fast, easy
inLab Scan SW with a choice of object-specific positioning of all scan objects and save time.
scan strategies gives you extremely precise,
reproducible results for all scanning work.
TECHNICAL DATA
inEos X5 Data
NEW: J.O.B.S. Jaw Oriented Biogeneric Settings. NEW: Virtual insertion. Simultaneous design of NEW: Gingiva design. Separate design element for
Especially for larger cases based on the digital several restoration levels in complex cases. producing restorations with a gingival component.
jaw information and residual tooth substance.
Alternative selection of different dental databases
for example jaws with few teeth.
Everything you need at a glance. High- Virtual articulator. Visualization of the complete Smile Design. To simulate the harmonious effect
performance software with quick access to tools paths of movement to determine the static and of the design proposal and balancing the smile
and an intelligent workflow for fast, easy support dynamic contact surfaces for correct functional lines using a 3D patient image.
of the design process. occlusion.
* Required for all other modules. ** Prerequisite: inLab SW 15.0 Basic Module.
DESIGN inLab SW 15.0 10 I 11
IMPLANT
RESTORATIONS. inLab SW 15.0 leads you easily and quickly through the steps to your desired design. The design
data set can be sent for example to infiniDent or be sent as STL export using the interface module for
fabrication at a suitable CAD/CAM production center.
The inLab SW 15.0 implantology module includes all the necessary tools
for precise implant restorations for single and multiple implants and also
for the first time screw retained bridges and bars*.
SCREW RETAINED BRIDGES AND BARS ON MULTI-UNIT ABUTMENTS
(SCREWED OR CEMENTED)
For in-house production for example with inLab MC X5 (zirconium oxide or PMMA). You can design screw
retained bridges and bars on multi-unit abutments with inLab SW 15.0.
The abutment is designed either directly or top down, i.e. fully anatomical designs can be split into crown
or crown coping and abutment at the press of a button and then produced for example with inLab MC X5
or inLab MC XL.
* Coming soon.
DESIGN inLab SW 15.0 12 I 13
IMPLANTOLOGY INTERFACES
SURGICAL GUIDES. RETAIN FLEXIBILITY.
You can design and produce custom surgical guides in your lab quickly With inLab SW 15.0 you can decide on a case-by-case basis whether
and cost-effectively with inLab SW 15.0. As part of integrated implant to complete the entire CAD/CAM process with Sirona components or
planning with Sirona 3D X-ray systems, surgical guides produced by use individual solutions from other manufacturers.
CAD/CAM are an accurate basis for planning the surgical procedure.
APOLLO DI
Prerequisite is a digital impression of the oral situation of the model for Match the optical data with the 3D X-ray data (ORTHOPHOS SL 3D, XG 3D or SIRONA
example with inEos X5 or via intraoral digital impression. Optionally a GALILEOS) for subsequent implant planning as a *.cmg.dxd planning file. CONNECT
restoration for implant planning can be designed according to prosthetic
CEREC AC infiniDent
aspects. The optical data is then exported.*
Connect
inLab MC X5
SIRONA inEos X5 inLab SW 15.0
inLab MC XL
The *.cmg.dxd planning file is imported into the inLab software 15.0 to design The surgical guide can then be milled in-house using the inLab MC X5 or inLab EXTERNAL EXTRAORAL SCANNER /
the surgical guide*. The shape of the surgical guide can be individually adapted MC XL ** for example or sent via STL export for print production.*** SOFTWARE MACHINE
for any span size with one or more drill holes. SUPPLIERS INTRAORAL SCANNER
The size of the model cast prosthesis can be marked on the working model Line textures are shown on the 3D model in the software. Customized attachments
and scanned with inEos X5.
Model blocking is shown as colored undercuts. Using the new user interface you have access to all the necessary design Standard bars for realization in zirconium oxide and metal
elements for the individual design of the model cast prosthesis.
The model cast prosthesis is individually adapted using design tools. STL export of the design data set*, wax-up for subsequent cast or direct Customized primary telescope and cone crowns
realization with laser sintering.
DESIGN
The new inLab MC X5 offers more than
just optimal functionality and simple
operation: its ex tremely stable
construction and modern design are
also highly attractive. Its compact,
elegant shape is a real eyecatcher and
complements perfectly the award-
winning inEos X5 extraoral scanner.
BROAD RANGE OF MATERIALS inLab MC X5 can be used for dry or wet production depending on the material grinding of fully anatomical restorations from high-strength monolithic
inLab MC X5 is a universal production and indication. Sirona has drawn upon its 30 years of experience in the wet materials. Changing between wet and dry production e.g. from glass ceramics
unit for processing zirconium oxide, processing of glass ceramics to create the ultimate machine for the wet to zirconium oxide is fast and uncomplicated.
polymers, composites, wax and sinter
metal*** as well as glass and hybrid
ceramics.
MILLING AND GRINDING SPINDLE TOUCH TECHNOLOGIE
NE W: A-F IN
E
E X T R UR S
B
Depending on whether it is for wet or dry processing, a diamond grinder or The unique inLab MC X5 technology is able to capture the position of disks
carbide cutter is used. Their cutting geometries and coatings are optimally and blocks with utmost precision. These exceptionally high levels of accuracy
developed for various indications and materials for outstanding surface enable you to make the most economical use of materials e.g. efficiently
results and margins. machine mesostructure blocs.
* From inLab CAD only.
** Limited indication spectrum.
*** Coming soon .
PRODUCTION inLab MC XL 18 I 19
inLab MC XL SPEED
AND PRECISION.
inLab MC XL is the fast wet milling and grinding unit with many production TECHNICAL DATA
options for your dental lab. You benefit from high speed and precision and
can switch from grinding to milling in just a few steps. The large selection inLab MC X5 inLab MC XL inLab MC X5 inLab MC XL
of materials and many uses give you particularly flexible and efficient GENERAL
Width 590 mm 700 mm
INDICATIONS
Veneers x x
production options. Height 810 mm 425 mm Inlays x x
Depth 580 mm 420 mm Onlays x x
NEW: EXTRA FINE GRINDING NEW: OPEN FOR STL RESTORATION DATA Weight 87 kg 43 kg Crowns x x
inLab MC XL is now even more precise inLab MC XL produces restorations
with the new extra fine grinding burs. perfectly tuned with the new inLab SW Required compressed air min. 7 bar Copings x x
Make restorations with the highest 15.0. Alternatively, you can import pressure
Bridge frameworks x x
accuracy and fine details in the areas of restorations in STL/XML format from Required compressed air min. 50 l/min*
occlusions and interdental spaces as well other CAD software e.g. exocad, 3Shape quantity Bridges x x
as on the preparation margin.* etc.*
Noise level <63dba <65dba Full-jaw bridges x
NE W N
Titan preforms WIP***
DESIG
MATERIAL FORMS
Blocks 40 x 19 x 12mm 85 x 40 x 22mm
Max. number of blocks per 6 1
process
Disks (form) 98/98.5mm
with collar
Disks (height) up to 25 mm ****
Material openness Yes Not explicit
TOOL MANAGEMENT
Automatic tool changing Yes No
Max. number of tools per 6 2(4)
process
Changeable tool magazine Yes No
controlled in SW
* Limited indication spectrum. * 80 l/min. is recommended. ** 30 will be available soon. *** Coming soon. **** 30mm will be available soon.
PRODUCTION inLab MC X5 AND inLab MC XL 20 I 21
Multi-positioning functions. Place your work inLab MC X5 multi-block management. Position Individual milling and grinding strategies. You
precisely in disks and blocks. Use the automatic up to six blocks of different materials in one order. have full control of the result and can choose from
functions auto-positioning, height optimization in inLab CAM supports you with the automatic block different material-specific processing strategies.
the disk or sinter support calculation. You can also size proposal and thus optimizes the use of For example select occlusal and interdental
define the object position individually. materials and processing times. NEW: Zirconium details, surface quality or reducing the support
oxide blocks can also be milled! pins.
H
T OUCI ZED
O P T IM
Nesting and stacking. Optimal efficiency is Machine and tool management. Using the intuitive OPEN for STL and XML. inLab MC XL and
achieved with inLab CAM for each material type. graphic user interface you have complete control inLab MC X5 are open for processing restoration
For example mill several restorations from one over the state of maintenance of your production data from all common dental CAD software*. The
glass or hybrid ceramic block on inLab MC XL with units e.g. tool running time. The operating optional XML import gives additional information
special stacking functions. Alternatively use the functions are touch-optimized and allow control such as preparation margins, insertion axes or
nesting function for milling zirconium oxide, and tool management of the machines from a order information e.g. from exocad or 3Shape.
polymers, metals or composites on the MC X5 or tablet.
MC XL.
PARTIAL
infiniDent. OPEN FOR EVEN MORE VARIETY. NS LY/C
ATIO OM
PL
T OR ET
R ES E
LY
EE
ED
R
L-F
EN
A
TUL
MET
OUS JAWS
Export digital design data directly from the Design custom, solid abutments and screw Using orthodontic analysis and planning software
inLab SW 15.0 CAD removables module or as an . retained bridges of titanium and cobalt-chrome (for example ONYXCEPH), orthodontic treatment
STL data set from a third-party system. directly in the new implantology module of your can be analyzed, planned and prepared based on
inLab SW 15.0. an intraoral scan.
NON-P RECI
ELS
U O
D
S
O
GM
ME
TA
RKIN RE L
WO TOR S
ATION
S
inDividual PF as conventional casting technique inDividual TI/NPM. Precision does not need to be Ortho SL. Whenever orthodontic work needs a
not suitable for CAD/CAM. Time-saving, cost- expensive. Using validated processes infiniDent good basis. Production of precise resin models
efficient production of removable dentures made produces your design data with CE-certified as the basis for orthodontic work from digital
of cobalt-chrome using a laser sintering technique materials with no extra costs for additional impression data received from Sirona or third-
with infiniDent. Due to an optimized production software or time-consuming training. party systems.
process, only minimal manual adjustment is
required in the lab.
For more information visit www.infinidentservices.com or contact our dental customer service at
+49 61 51-39 61 818 or service@infinidentservices.com
Note: infiniDent is not available in all countries.
PRODUCTION inFire HTC speed 24 I 25
MAXIMUM FREEDOM In the furnace version of inFire HTC speed with Superspeed and Metal, the sintering furnace can be
S peed and Super speed prepared within just a few seconds for sintering pre-sintered non-precious metal under a protective gas
programs or conventional atmosphere. The inCoris CC sintering metal from Sirona is first processed on the inLab milling unit in
slow sintering enlarged form as in the zirconium oxide method and then compacted by sintering under an argon
Regular sintering programs atmosphere.
for ceramics from the most
important manufacturers of
dental materials
inFire HTC speed with Superspeed and metal option (EU)
Free programming for slow
and speed sintering
Sintering with pre-drying inFire HTC speed Data
Accessories Speed sintering tray, rack and fork for the sintering tray
DESIG
Superspeed crucible, Superspeed cover, crucible fork, fireproof crucible rack
Dimensions (W x H x D) 500x802x565 mm
Weight 80 kg
Supply voltage 200240 V
Mains frequency 50/60 Hz
Nominal power 2500 W
Maximum sintering 1.650C
* Net sintering time for inCoris TZI and inCoris ZI. temperature
See the CAD/CAM material brochure for more details on the complete range of materials or visit www.sirona.com or alternatively contact your Sirona dealer.
CAD/CAM MATERIALS 26 I 27
NEW
inCoris CC Sirona TiBase NEW: Sirona disks for zirconium oxide, PMMA and
Sintered metal on the basis of a CoCr alloy for NPM Sirona titanium base for custom abutments. sintered metal for production with inLab MC X5.*
restorations. Available for various implant systems together
with a scanbody and abutment screw.
SUPERSPEED AUTHORIZED
Materials with this label are approved for the Speed and Superspeed functions of inFire HTC
speed
inCoris ZI, inCoris TZI, and inCoris TZI C are approved for speed sintering
authorized inCoris ZI and inCoris TZI are approved for Superspeed sintering
CE- and FDA-approved
For more information on the entire range of Sirona materials see the CAD/CAM material brochure, contact your Sirona dealer or visit www.sirona.com
All CAD/CAM materials can be ordered conveniently from your specialist dealer. * Coming soon.
DIGITAL IMPRESSIONS 28 I 29
Precise impression data in natural colors Data format .dxd via Sirona Connect portal
No additional costs Sirona Connect portal Requirements: Internet connection, email address, one-time registration at www.sirona-connect.net
Lab software Via the Sirona Connect portal, the digital model data in the inLab software are opened for further processing with
inLab software or STL export.
* The Interfaces Module is included in the scope of supply for APOLLO DI. User prerequisite: inLab SW 15.0 Basic Module.
** User prerequisite: inLab SW 15.0 Basic Module and inLab SW 15.0 Interfaces Module.
: e
THE DIGITAL WORKFLOW WITH SIRONA CONNECT NE-W
nSer vic
Desig CEREC FABRICATE ON inLab
SIRONA f or r s
us e PRODUCTION UNITS
CONNECT DESIGN WITH
SCAN CHECK SEND RECEIVE FINISH DELIVER
PORTAL inLab SW
Centralized FABRICATE VIA EXTERNAL
production CENTRAL PRODUCTION
STL
e.g. infiniDent
EXPORT TO
OTHER CAD
FEEDBACK
STL
SOFTWARE FABRICATE VIA
OTHER CAD/CAM
inLab SYSTEM
DENTAL LAB FREEDOM OF CHOICE.
Subject to technical changes and errors in the text, Order No. A91100-M43-B884-01-7600, Printed in Germany, Dispo-No. 04605, OEW 15 WS 0915.V3
ALWAYS AT THE
FOREFRONT OF
INNOVATION!
As global innovation leader for dental equipment, we continuously invest
in research and thus in the future of modern dentistry. By networking digital
technologies with integrated solutions and optimizing the treatment workflow, we
create improved treatment results, more comfort and safety for the patient as well
as time and cost savings in everyday work. The combination of constant innovative
power and globally growing sales and service structures makes Sirona the global
market leader trusted by thousands of practices and labs around the world.
Enjoy every day. With Sirona.