Documente Academic
Documente Profesional
Documente Cultură
Terminals
Primary terminal is M10 copper pin with electroplated coating.
Clamp-type secondary terminals accommodate 2.5 mm2 through
25 mm2 wire.
The M8 ground terminal is also provided for grounding the sec-
ondary circuit at the transformer.
Dimensional drawings
Weight: 39 kg
339 Crepage distance 800 mm
197.5 M10 HV TERMINAL
506
29.5
6 30
162 264
25 R6
Name plate
330 375
M8
187.5
25
22.5
250
300
Unit performance
Parameters
Highest voltage for equipment Um (r.m.s.) [kV] up to 24
Rated power-frequency withstand voltage (r.m.s.) [kV] up to 60
Rated lightning impulse withstand voltage (peak) [kV] up to 150
Rated frequency [Hz] 50, 60
Rated primary voltages Un [kV] up to 22:3
Standard voltage factor [-] 1,9xUn/8h
Max. number of secondary winding [-] 2
Rated secondary voltages measuring winding [V] up to 230:3
Rated secondary voltages for open delta connection [V] up to 230:3
Max. rated output*/classes [VA/-] 25/0,2; 50/0,5; 100/1; 150/3; 150/3P; 200/6P
Thermal limiting output [VA] 500
Creepage distance [mm] 800
Approximate weight [kg] 39
Ambient temperature [C] -40 +40
* sum of rated output per voltage transformers
Other value of parameters: rated output, classes, rated frequency, voltage factor, rated secondary voltage, rated primary voltage can also be supplied on request.
ABB Contact Center We reserve the right to make technical changes or modify the contents of this
ABB Sp. z o.o. We reserve all rights in this document and in the subject matter and illustrations
Branch in Przasnysz contained therein. Any reproduction, disclosure to third parties or utilization of its
contents in whole or in parts is forbidden without prior written consent of ABB.
59 Leszno St.
06-300 Przasnysz, Poland Copyright 2014 ABB
Phone: +48 22 22 38 900 All rights reserved
Fax: +48 22 22 38 950
www.abb.pl