Documente Academic
Documente Profesional
Documente Cultură
Joshi
Chirag.r.joshi@ril.com
P&O Team, Operations
7th Feb2014
Background & Objectives
This document is designed for the introduction of primary LTE KPIs & counters with
Samsung system specific counters details.
KPI formulas & Pegging as per the Samsung system for the KPIs & counters.
Can be used by RJIL engineer for the performance & optimization purpose of Samsung
ENODEb.
o RAN Primary KPIs are grouped in Accessibility, Retainability, Integrity & Mobility,
shows here the KPIs circulated in Daily Performance Dashboard.
Confidential Reliance Jio Infocomm Limited 6
2. Accessibility KPIs & Counters
Accessibility KPIs are used to measure how successfully user is able to access the network.
Divided in 3 segments, RRC setup, S1 setup & ERAB setup.
Confidential Reliance Jio Infocomm Limited 7
2.1 Formulas Accessibility KPIs
KPI Name Formula
[(ConnEstabSucc/ConnEstabAtt) *
Session Setup Success Rate (%) (S1ConnEstabSucc/S1ConnEstabAtt) *
(EstablnitSuccNbr/EstablnitAttNbr)] * 100
o Session setup Success Rate covers RRC to ERAB procedure success rate.
RRC ConnEstabFail_S1AP_SIG_FAIL(count) A call is released due to receiving S1AP signaling during RRC establishment.
A call cannot be accepted because the cell is barred after receiving the RRC
RRC ConnEstabReject_CP_CC_FAIL(count) Connection Request message, or there is no MME available for service
during RRC establishment.
A call cannot be accepted due to Call Admission Control after receiving the
RRC ConnEstabReject_CP_CAPA_CAC_FAIL(count)
RRC Connection Request message during RRC establishment.
RRC ConnEstabReject_S1AP_MME_OVLD(count) A call cannot be accepted due to MME overload during RRC establishment.
Confidential Reliance Jio Infocomm Limited 9
2.2 Counters Description
Procedure Counters Name Counter Description
S1 Establishment S1ConnEstabAtt(count) UE logical S1 connection setup attempt count
S1 Establishment S1ConnEstabSucc(count) UE Logical S1 Connection Setup success count
A call is released due to reset notification (eNB failure or block
S1 Establishment S1ConnEstabFail_CP_CC_FAIL(count)
restart) from ECMB or by the ECCB block during S1 connection.
A call is released due to the S1AP specification cause during S1
S1 Establishment S1ConnEstabFail_S1AP_CU_FAIL(count)
connection.
S1 Establishment S1ConnEstabFail_S1AP_LINK_FAIL(count) A call is released due to S1 SCTP link failure during S1 connection.
Initial ERAB establishment ErabInitFailNbr_UP_MAC_FAIL(count) A call is released due to the failure in the MAC block during ERAB setup.
Initial ERAB establishment ErabInitFailNbr_UP_PDCP_FAIL(count) A call is released due to the failure in the PDCP block during ERAB setup.
Initial ERAB establishment ErabInitFailNbr_UP_RLC_FAIL(count) A call is released due to the failure in the RLC block during ERAB setup.
Initial ERAB establishment ErabInitFailNbr_RRC_SIG_FAIL(count) A call is released due to receiving RRC signaling during ERAB setup.
A call is released due to ERAB uplink message timeout (not received) during
Initial ERAB establishment ErabInitFailNbr_RRC_SIG_TO(count)
ERAB setup.
A call is released due to insufficient backhaul-based eNB resources during
Initial ERAB establishment ErabInitFailNbr_CP_BH_CAC_FAIL(count)
ERAB setup.
Initial ERAB establishment ErabInitFailNbr_S1AP_LINK_FAIL(count) A call is released due to S1 SCTP link failure during ERAB setup
Confidential
Initial ERAB establishment Reliance Jio Infocomm Limited
ErabInitFailNbr_S1AP_SIG_FAIL(count) 11
A call is released due to receiving S1AP signaling during ERAB setup.
3. Retainability KPIs & Counters
o The call drop statistics are on the calls that are connected successfully but
abnormally dropped due to eNB failure, by the MME or any other reason.
The sum of the size of the DCCT/DTCH MAC PDU that received HARQ ACK
DL THRPT AirMacByteDl
among the MAC PDU transmitted via PDSCH during the statistics period.
The sum of sections that have the MAC PDU successfully transmitted
DL THRPT AirMacTtiDl
via PDSCH during the statistics period.
The sum of the size of the MAC PDU successfully received via PUSCH
UL THRPT AirMacByteUl
during the statistics period.
The sum of sections that have the MAC PDU successfully received via
UL THRPT AirMacTtiUl
PUSCH during the statistics period.
Intra ENB HO IntraEnbPrepFail_UP_RLC_FAIL(count) Preparation fails due to internal failure in the RLC block during the intra handover preparation.
Intra ENB HO IntraEnbPrepFail_RRC_SIG_FAIL(count) A call is released due to receiving RRC signaling during the intra handover preparation.
Intra ENB HO IntraEnbPrepFail_CP_BH_CAC_FAIL(count) Preparation fails due to insufficient backhaul-based eNB resources during the intra handover preparation.
Intra ENB HO IntraEnbPrepFail_CP_CAPA_CAC_FAIL(count) Preparation fails due to insufficient capacity-based eNB resources during the intra handover preparation.
Intra ENB HO IntraEnbPrepFail_CP_QOS_CAC_FAIL(count) Preparation fails due to insufficient QoS-based eNB resources during the intra handover preparation.
Intra ENB HO IntraEnbPrepFail_S1AP_CU_FAIL(count) Preparation fails due to S1AP specification cause during the intra handover preparation.
Intra ENB HO IntraEnbPrepFail_S1AP_LINK_FAIL(count) Preparation fails due to S1 SCTP link failure during the intra handover preparation.
Intra ENB HO IntraEnbPrepFail_S1AP_SIG_FAIL(count) Preparation fails due to receiving S1AP signaling during the intra handover preparation.
Intra ENB HO IntraEnbFail_CP_CC_TO(count) A call is released due to call control timeout in the protocol blocks (MAC, RLC, PDCP, GTP) during the intra handover execution.
A call is released due to reset notification (eNB failure or block restart) from ECMB or by the ECCB block during the intra
Intra ENB HO IntraEnbFail_CP_CC_FAIL(count)
handover execution.
Intra ENB HO IntraEnbFail_UP_GTP_FAIL(count) A call is released due to the internal failure in the GTP block during the intra handover execution.
Intra ENB HO IntraEnbFail_UP_MAC_FAIL(count) A call is released due to the internal failure in the MAC block during the intra handover execution.
Intra ENB HO IntraEnbFail_UP_RLC_FAIL(count) A call is released due to the internal failure in the RLC block during the intra handover execution.
Intra ENB HO IntraEnbFail_RRC_HC_TO(count) A call is released due to HO command timeout (not received) during the intra handover execution.
Intra ENB HO IntraEnbFail_RRC_SIG_FAIL(count) A call is released due to receiving RRC signaling during the intra handover execution.
Intra ENB HO IntraEnbFail_S1AP_CU_FAIL(count) A call is released due to the S1AP specification cause during the intra handover execution.
Intra ENB HO IntraEnbFail_S1AP_LINK_FAIL(count) A call is released due to S1 SCTP link failure during the intra handover execution.
Intra ENB HO
Confidential IntraEnbFail_S1AP_SIG_FAIL(count) A call is released
Reliance due to S1AP
Jio Infocomm signaling timeout (not received) during the intra handover execution.
Limited 18
5.2 Inter X2 Out Success Rate (%)
S1 HO is between 2 cells of different ENBs, which are not connected with X2 interface, in
actual network it will be between inter MME mainly.
Confidential Reliance Jio Infocomm Limited 21
5.3.1 Counters Description
Procedure Counters Name Counter Description
S1 Handover InterS1OutAtt(count) The number of attempts for S1 handover in SeNB
S1 Handover InterS1OutPrepSucc(count) The number of successes for S1 handover preparation in SeNB
S1 Handover InterS1OutSucc(count) The number of successes for S1 handover execution in SeNB
Preparation fails due to reset notification (eNB failure or block restart) from ECMB or by ECCB
S1 Handover
InterS1OutPrepFail_CP_CC_FAIL(count) block during inter S1 handover preparation.
S1 Handover InterS1OutPrepFail_S1AP_CU_FAIL(count) Preparation fails due to S1AP specification cause during inter S1 handover preparation.
S1 Handover InterS1OutPrepFail_S1AP_LINK_FAIL(count) Preparation fails due to S1 SCTP link failure during inter S1 handover preparation.
Preparation fails due to S1AP relocprep timeout (not received) during the inter S1 handover
S1 Handover
InterS1OutPrepFail_S1AP_RP_TO(count) preparation.
S1 Handover InterS1OutPrepFail_S1AP_SIG_FAIL(count) Preparation fails due to receiving S1AP signaling during inter S1 handover preparation.
A call is released due to call control timeout in the protocol blocks (MAC, RLC, PDCP, GTP) during
S1 Handover
InterS1OutFail_CP_CC_TO(count) the inter S1 handover execution.
A call is released due to reset notification (eNB failure or block restart) from ECMB or by ECCB
S1 Handover
InterS1OutFail_CP_CC_FAIL(count) block during the inter S1 handover execution.
S1 Handover InterS1OutFail_UP_GTP_FAIL(count) A call is released due to the failure in the GTP block during the inter S1 handover execution.
S1 Handover InterS1OutFail_UP_MAC_FAIL(count) A call is released due to the failure in the MAC block during the inter S1 handover execution.
S1 Handover InterS1OutFail_UP_PDCP_FAIL(count) A call is released due to the failure in the PDCP block during the inter S1 handover execution.
S1 Handover InterS1OutFail_UP_RLC_FAIL(count) A call is released due to the failure in the RLC block during the inter S1 handover execution.
S1 Handover InterS1OutFail_RRC_SIG_FAIL(count) A call is released due to receiving RRC signaling during the inter S1 handover execution.
S1 Handover InterS1OutFail_S1AP_CU_FAIL(count) A call is released due to the S1AP specification cause during the inter S1 handover execution.
S1 Handover InterS1OutFail_S1AP_LINK_FAIL(count) A call is released due to the S1 SCTP link failure during the inter S1 handover execution.
A call is released due to S1AP relocoverall timeout (not received) during the inter S1 handover
S1 Handover
InterS1OutFail_S1AP_RO_TO(count) execution.
S1 Handover
Confidential
InterS1OutFail_S1AP_SIG_FAIL(count) A call Reliance Jio Infocomm
is released Limited S1AP signaling during the inter S1 handover execution.
due to receiving 22
6. Demo MYCOMM & LSMR