Documente Academic
Documente Profesional
Documente Cultură
0020 X Inspection and Test Plan (ITP) Verify Company approval of manufacturers Inspection and Test
Plan
0030 X Welding Procedure Specification (WPS) and Procedure Per Section 6 of 01-SAMSS-046 (verify Company approval of
Qualification Records (PQR) WPSs / PQRs for UNS N08904, S31254, S31803, and S32205
& S32750). Also see NACE MR-0103, Section 4.
0040 X X Raw Material Verification Per paragraph 8.2 and 8.3 of 01-SAMSS-046 and applicable
ASTM std.
0060 X NDT Personnel and Procedure Per paragraph 12 of 01-SAMSS-046 , Verify qualification per
ASNT CP-189 / EN 473 / ASNT SNT TC-1A
0020
0010
***
X
In process inspection & test requirement
Workmanship, Components, and Dimensions
Specification Details / Notes:
0040 X X a),,Chemical Composition Per paragraph 8.2 and 8.3 of 01-SAMSS-046 and applicable
ASTM std. (dual certification, carbon content)
IR010800 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 12/16/2009 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: IR010800 2 of 3
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0090 X X f),,Corrosion Test Per paragraph 10 of 01-SAMSS-046 (ASTM A-262 on a lot
basis)
0100 X X g),,Metallographic Examination Per paragraph 11 of 01-SAMSS-046 and applicable ASTM std.
(ferrite content / microstructure analysis)
0110 X X Heat Treatment Per paragraph 11 of 01-SAMSS-046 and applicable ASTM std.
(Liquid quenching required if ISO 15156 is stated in the PO)
0140 X X Non Destructive Testing Per paragraph 12.3 and 12.4 of 01-SAMSS-046(non-destructive
electrical plus hydro per ASTM A-999)
0150 X X Pickling and Passivation Per paragraph 13 of 01-SAMSS-046 and applicable ASTM std.
0030
0010
***
X
Final inspection & test requirements
Visual Inspection
Specification Details / Notes:
As per 01-SAMSS-046 and applicable ASTM std.
0070 X X Mill Test Certificate Per paragraph 19 of 01-SAMSS-046 and applicable ASTM std.
IR010800 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 12/16/2009 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: IR010800 3 of 3
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
Notes:
(1) May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices.
(2) See form IR000003 for instructions on using this form.
End of IR010800