Documente Academic
Documente Profesional
Documente Cultură
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it
for future reference.
*MFL67727412*
P/NO : MFL67727412 (1312-REV03) www.lg.com
2 IMPORTANT SAFETY INSTRUCTIONS
NOTE
yyDo not press stronglyShort-circuit
upon the panel with
Power Supply
The note helps you understand and use the a hand or a sharp object such as a nail,
Breaker
product safely. Please read the note carefully pencil or pen, or make a scratch on it.
before using the product.
IMPORTANT SAFETY INSTRUCTIONS 3
yyProtect the power cord from being yyCAUTION concerning the Power Cord
walked on or pinched particularly at plugs, (Can differ by country):
convenience receptacles, and the point It is recommended that appliances be
where they exit from the apparatus. placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owners manual to be certain. Do not
yyOnly use attachments/accessories connect too many appliances to the same
specified by the manufacturer. AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
yyUse only with a cart, stand, tripod, bracket, cords, or damaged or cracked wire insulation
or table specified by the manufacturer, or are dangerous. Any of these conditions could
sold with the apparatus. When a cart is used, result in electric shock or fire. Periodically
use caution when moving the cart/apparatus examine the cord of your appliance, and
combination to avoid injury from tip-over. if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with
Short-circuit an exact replacement part by an authorized
Power Supply
Power Supply
Breaker
Short-circuit
Breaker service. Protect the power cord from physical
or mechanical abuse, such as being twisted,
yyUnplug this apparatus during lightning kinked, pinched, closed in a door, or walked
ENGLISH
ENG
storms or when unused for long periods of upon. Pay particular attention to plugs, wall
time. outlets,
Power Supply and the point where the cord exits
Short-circuit
Breaker the appliance. Do not move the TV with
the power cord plugged in. Do not use a
Power Supply
Short-circuit
Breaker
damaged or loose power cord. Be sure do
grasp the plug when unplugging the power
yyRefer all servicing to qualified service
cord. Do not pull on the power cord to unplug
personnel. Servicing is required when
the TV.
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or Short-circuit Power
yyWarning
Supply
- To reduce the risk of fire or
moisture, does not operate normally, or hasBreaker electrical shock, do not expose this product
been dropped. to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
yyDo not stick metal objects or any other
conductive material into the power cord.
Do not touch the end of the power cord
while it is plugged in.
yyKeep the packing anti-moisture material or yyDo not expose to dripping or splashing
vinyl packing out of the reach of children. and do not place objects filled with liquids,
Power Supply
Anti-moisture material is harmful if such as vases, cups, etc. on or over the
Short-circuit
Breaker
swallowed. If swallowed by mistake, force apparatus (e.g. on shelves above the unit).
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach
of children. Power Supply
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
4 IMPORTANT SAFETY INSTRUCTIONS
yyGrounding yyCleaning
(Except for devices which are not When cleaning, unplug the power cord and
grounded.) wipe gently with a soft cloth to prevent
Ensure that you connect the earth ground scratching. Do not spray water or other
wire to prevent possible electric shock liquids directly on the TV as electric shock
(i.e. a TV with a three-prong grounded AC may occur. Do not clean with chemicals
plug must be connected to a three-prong such as alcohol, thinners or benzine.
grounded AC outlet). If grounding methods yyMoving
are not possible, have a qualified electrician Make sure the product is turned off,
install a separate circuit breaker. Do not try to unplugged and all cables have been
ground the unit by connecting it to telephone removed. It may take 2 or more people to
wires, lightening rods, or gas pipes. carry larger TVs. Do not press or put stress
on the front panel of the TV.
yyVentilation
Short-circuit
Power Supply
Install your TV where there is proper
Breaker ventilation. Do not install in a confined
space such as a bookcase. Do not cover
yyAs long as this unit is connected to the AC the product with cloth or other materials
wall outlet, it is not disconnected from the AC while plugged. Do not install in excessively
power source even if the unit is turned off. dusty places.
yyDo not attempt to modify this product in yyIf you smell smoke or other odors coming
any way without written authorization from from the TV, unplug the power cord and
LG Electronics. Unauthorized modification contact an authorized service center.
could void the users authority to operate yyKeep the product away from direct
ENGLISH
this product.
ENG
sunlight.
yyOutdoor Antenna Grounding yyNever touch this apparatus or antenna
(Can differ by country): during a thunder or lightning storm.
If an outdoor antenna is installed, follow yyWhen mounting a TV on the wall, make
the precautions below. An outdoor antenna sure not to install the TV by hanging the
system should not be located in the vicinity power and signal cables on the back of the
of overhead power lines or other electric light TV.
or power circuits, or where it can come in yyDo not allow an impact shock or any
contact with such power lines or circuits as objects to fall into the product, and do not
death or serious injury can occur. Be sure the drop anything onto the screen.
antenna system is grounded so as to provide yyDisconnecting the Main Power
some protection against voltage surges The power outlet used with this device
and built-up static charges. Section 810 of must remain easily accessible.
the National Electrical Code (NEC) in the yyStore the accessories (battery, etc.) in a
U.S.A. provides information with respect to safe location out of the reach of children.
proper grounding of the mast and supporting yyThis apparatus use batteries. In your
structure, grounding of the lead-in wire to community there might be regulations
an antenna discharge unit, size of grounding that require you to dispose of these
conductors, location of antenna discharge batteries properly due to environmental
unit, connection to grounding electrodes and considerations. Please contact your
requirements for the grounding electrode. local authorities for disposal or recycling
Antenna grounding according to the information.
National Electrical Code, ANSI/NFPA 70 yyDo not dispose of batteries in a fire.
yyDo not short circuit, disassemble or allow
Antenna Lead in Wire the batteries to overheat.
ENGLISH
ENG
yyTake care not to touch the ventilation
openings. When watching the TV for
a long period, the ventilation openings
may become hot. This does not affect
the performance of the product or cause
defects in the product.
yyIf the TV feels cold to the touch, there
may be a small flicker when it is turned
on. This is normal, there is nothing wrong
with TV. Some minute dot defects may be
visible on the screen, appearing as tiny red,
green, or blue spots. However, they have
no adverse effect on the TVs performance.
Avoid touching the LCD screen or holding
your finger(s) against it for long periods
of time. Doing so may produce some
temporary distortion effects on the screen.
6 IMPORTANT SAFETY INSTRUCTIONS
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com .
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete
your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
ENGLISH
content.
ENG
DivX, DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
TABLE OF CONTENTS
2 IMPORTANT SAFETY 28 REMOTE CONTROL
INSTRUCTIONS
6 Viewing 3D Imaging (For 3D models) 31 Magic Remote Control
Functions
7 LICENSES
32 Registering Magic Remote Control
32 How to use Magic Remote Control
7 OPEN SOURCE SOFTWARE 32 Precautions to Take when Using the
NOTICE Magic Remote Control
33 WATCHING TV
8 TABLE OF CONTENTS
33 Turning the TV on for the first time
11 Optional Extras
ENG
18 MAKING CONNECTIONS
39 TROUBLESHOOTING
18 Connecting to an antenna or cable
19 Connecting to a HD receiver, DVD
Player, or VCR
19 - HDMI Connection
20 - DVI to HDMI Connection
21 - Connecting to a mobile phone
22 - Component Connection NOTE
23 - Composite Connection
yyImage shown may differ from your TV.
24 Connecting to a PC yyYour TVs OSD (On Screen Display) may
24 - HDMI Connection or DVI to HDMI differ slightly from that shown in this
Connection manual.
26 Connecting to an Audio System yyThe available menus and options may
26 - Digital Optical Audio Connection differ from the input source or product
27 Connecting Headphones model that you are using.
27 Connecting a USB Drive yyNew features may be added to this TV in
the future.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9
Installation Procedure
1 Open the package and make sure all the accessories are included.
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the
local dealer where you purchased your product. The illustrations in this manual may differ from the
actual product and item.
ENGLISH
ENG
CAUTION
yyDo not use any unapproved items to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty.
yyIn case of some model, the thin film on screen is a part of TV, So dont take it off.
NOTE
yyThe items supplied with your product may vary depending upon the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width.
yyUse an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit
into your TVs USB port.
B
B
A A
*A 10 mm
*B 18 mm
10 ASSEMBLING AND PREPARING
Tag On
Tag On Blu-Ray
ASSEMBLING AND PREPARING 11
Optional Extras
Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
These devices only work with certain models.
The model name or design may be changed manufacturers circumstances or policies.
ENGLISH
ENG
Tag On
AN-BL***
Wireless IR Blaster
(Depending upon model)
12 ASSEMBLING AND PREPARING
Screen
Buttons
OK
SETTINGS
INPUT
ENGLISH
ENG
Speakers
Remote Control Sensor
Logo Light
Button Description
/ (^ / v) Scrolls through the saved channels.
(SETTINGS) Accesses the main menus, or saves your input and exits the menus.
NOTE
yyRemoving the protective film on the bottom of the TV
(Depending upon model)
The protective film was applied to the TV face to protect it
from scratches and other damage during shipping.
When the TV is installed, peel the film off the bottom of the
cabinet.
ppps
ASSEMBLING AND PREPARING 13
Lifting and moving the TV yyWhen transporting a large TV, there should
be at least 2 people.
yyWhen transporting the TV by hand, hold the
When moving or lifting the TV, read the
TV as shown in the following illustration.
following to prevent the TV from being
scratched or damaged and for safe
transportation regardless of its type and size.
CAUTION
yyAvoid touching the screen at all times, as
yyWhen transporting the TV, do not expose
this may result in damage to the screen.
the TV to jolts or excessive vibration.
yyWhen transporting the TV, keep the TV
yyIt is recommended to move the TV in
upright, never turn the TV on its side or tilt
the box or packing material that the TV
towards the left or right.
originally came in.
yyBefore moving or lifting the TV, disconnect
the power cord and all cables.
yyWhen holding the TV, the screen should
face away from you to avoid damage.
ENGLISH
ENG
yyHold the top and bottom of the TV
frame firmly. Make sure not to hold the
transparent part, speaker, or speaker grill
area.
14 ASSEMBLING AND PREPARING
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment
center or other furniture.
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
CAUTION
yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or
flat surface to protect the screen from scratches.
yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the
TV may tilt forward after being installed.)
yyDo not tighten the screws with too much force; otherwise they may be damaged and come
loose later.
NOTE
yyRemove the stand before installing the TV on a wall mount by performing the stand attachment
in reverse.
ENGLISH
ENG
1 4 EA
M4 x 14
3
4 EA
M4 x 14
Stand Body Front
Stand Base
2
ASSEMBLING AND PREPARING 15
10 cm
10 cm 10 cm
10 cm Front Rear
2 Connect the power cord to a wall outlet. Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
CAUTION
ENGLISH
1 Connect the Desk-mount Cables to the
ENG
yyDo not place the TV near or on sources Stand Base using the Bracket Screws.
of heat, as this may result in fire or other
damage. 2 Fix the Desk-mount Cables to a table using
the Desk-mount Screws.
2 EA
15 15
M4 X 8 P4 X 8
2 EA 2 EA
WARNING
yyTo prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
16 ASSEMBLING AND PREPARING
NOTE
ENG
NOTE
yyUse a platform or cabinet that is strong
and large enough to support the TV
securely. Cable Management
yyBrackets, bolts and ropes are optional.
You can obtain additional accessories from
your local dealer. CAUTION
yyDo not move the TV by holding the cable
holder and cable management, as the
cable holders may break, and injuries and
damage to the TV may occur.
ASSEMBLING AND PREPARING 17
Mounting on a wall
Wall mount bracket (optional)
An optional wall mount can be used with your LSW430B
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the wall
mount bracket at the rear of the TV. Install the
wall mount bracket on a solid wall perpendicular MSW240
to the floor. If you are attaching the TV to other
building materials, please contact qualified
personnel to install the wall mount. Detailed
instructions will be included with the wall
mount. We recommend that you use an LG
brand wall mount.
CAUTION
yyDisconnect the power first, and then
10 cm move or install the TV. Otherwise electric
shock may occur.
10 cm yyIf you install the TV on a ceiling or slanted
10 cm wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
ENGLISH
10 cm
ENG
personnel.
yyDo not over tighten the screws as this
may cause damage to the TV and void
your warranty.
Make sure to use screws and wall mounts that yyUse the screws and wall mounts that
meet the VESA standard. Standard dimensions meet the VESA standard. Any damages
for the wall mount kits are described in the or injuries by misuse or using an improper
following table. accessory are not covered by the
warranty.
Model 42/47/55LA6600
47/55LA6610
42/47LA6680 NOTE
VESA (A x B) 400 x 400 yyUse the screws that are listed on the
VESA standard screw specifications.
A
B yyThe wall mount kit includes an installation
manual and necessary parts.
yyThe wall mount bracket is optional. You
Standard screw M6 can obtain additional accessories from
your local dealer.
Number of screws 4 yyThe length of screws may differ
Wall mount bracket MSW240 depending upon the wall mount. Make
(optional) LSW430B sure to use the proper length.
yyFor more information, refer to the manual
supplied with the wall mount.
18 MAKING CONNECTIONS
MAKING CONNECTIONS
You can connect various external devices to the TV. Supported external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external
devices. For more information on external devices connection, refer to the manual provided with
each device.
NOTE
yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal
input cable to the TV through a DVD recorder or VCR. For more information of recording, refer
to the manual provided with the connected device.
yyThe external device connections shown may differ slightly from illustrations in this manual.
yyConnect external devices to the TV regardless of the order of the TV port.
ANTENNA
yyIf you connect a gaming device to the TV, use the cable suppliedIN with the gaming device.
yyRefer to the external equipments manual for operating instructions.
VHF Antenna
UHF Antenna
Antenna
ANTENNA
IN Coaxial (75) or CABLE
IN Coaxial (75)
Wall Jack
Terminal
CAUTION
yyMake sure not to bend the copper wire Note
of the RF cable. yyTo improve the picture quality in a poor
signal area, please purchase a signal
amplifier and install properly.
Copper wire yyUse a signal splitter to use more than 2
TVs.
CABLE
IN yyIf the antenna is not installed properly,
yyComplete all connections between contact your dealer for assistance.
devices, and then connect the power yyDTV Audio Supported Codec: MPEG,
cord to the power outlet to prevent Dolby digital, AAC, HE-AAC
damage to your TV.
MAKING CONNECTIONS 19
HDMI Connection
NOTE
yyUse the latest High Speed HDMI Cable with CEC (Customer Electronics Control) function.
yyHigh Speed HDMI Cables are tested to carry an HD signal up to 1080p and higher.
yyHDMI Audio Supported Format: Dolby Digital, PCM (Up to 192 kHz, 32 kHz / 44.1 kHz / 48 kHz
/ 96 kHz / 192kHz ), DTS.
ENGLISH
ENG
3 (MHL)
HDMI
(*Not Provided)
/DVI IN
2
Transmits the digital video signal from an external device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal,
connect an audio cable.
NOTE
yyWhen using the HDMI/DVI cable, Single link is only supported.
3 (MHL)
(*Not Provided)
/DVI IN
ENGLISH
2
ENG
1(ARC)
PC-AUDIO IN
WHITE
RED
DVI OUT
Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from
mobile phones to television sets.
NOTE
yyConnect the mobile phone to the HDMI/DVI IN 3 (MHL) port to view the phone screen on the TV.
yyThis only works for the MHL-enabled phone.
yyWith some MHL supporting mobile phones, you can use the TV remote to control the phone.
yyAn MHL passive cable is needed to connect the TV and a mobile phone.
yyRemove the MHL cable from the TV when:
- the MHL function is disabled.
- your mobile device is fully charged in standby mode.
MHL Cable
3 (MHL)
(*Not Provided)
ENGLISH
ENG
Mobile phone
22 MAKING CONNECTIONS
Component Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external
device and the TV with a component cable as shown in the following illustration.
NOTE
yyIf cables are installed incorrectly, it could cause the image to display in black and white or with
distorted color.
yyCheck to ensure the cables are matched with the corresponding color connection.
PC-AUDIO IN
ENG
GREEN
BLUE
RED
WHITE
RED
(*Not Provided)
(*Not Provided)
GREEN
WHITE
BLUE
RED
RED
L R
VIDEO AUDIO
Composite Connection
Transmits analog video and audio signals from an external device to the TV. Connect the external
device and the TV with the composite cable as shown in the following illustration.
NOTE
yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of
the TV.
yyCheck to ensure the cables are matched with the corresponding color connection.
ENGLISH
/AV IN
ENG
PC-AUDIO IN
YELLOW
WHITE
RED
(*Not Provided)
YELLOW
WHITE
RED
Connecting to a PC
NOTE
yyIt is recommended to use an HDMI connection for the best image quality.
yyDepending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in
use.
yyIn PCmode, there may be noise associated with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC output to another resolution, change the refresh
rate to another rate or adjust the brightness and contrast on the PICTURE menu until the
picture is clear.
yyThe synchronization input form for Horizontal and Vertical frequencies is separate.
yyDepending upon the graphics card, some resolution settings may not allow the image to be
positioned on the screen properly.
yyIf you are using DVI out from a PC, you have to connect analog audio separately. Refer to the
instructions on the next page.
yyWhen using the HDMI/DVI cable, Single link is only supported.
HDMI
(*Not Provided)
/DVI IN
2
PC
1(ARC)
3 (MHL)
HDMI
3
/DVI IN
2
MAKING CONNECTIONS 25
1(ARC)
Method B: DVI to HDMI Connection
3 (MHL)
(*Not Provided)
/DVI IN
2
1(ARC)
/AV IN
PC-AUDIO IN
WHITE
RED
ENGLISH
ENG
(*Not Provided) AUDIO OUT DVI OUT
PC
(PC)
(PC) (RGB/HDMI-PC)
(RGB/HDMI-PC)
RGB
RGB AUDIO
AUDIO
Transmits a digital audio signal from the TV to an external device. Connect the external device and
the TV with the optical audio cable as shown in the following illustration.
NOTE
yyDo not look into the optical output port. Looking at the laser beam may damage your vision.
yyAudio with ACP (Audio Copy Protection) function may block digital audio output.
ENGLISH
ENG
OUT
OPTICAL
DIGITAL
H/P AUDIO
(*Not Provided)
OPTICAL AUDIO IN
Connecting Headphones
You listen to the sound using headphones.
NOTE
yyAUDIO menu options are disabled when headphones are connected.
yyWhen changing AV MODE with headphones connected, the change is applied to video but not
to audio.
yyOptical Digital Audio Out is not available when headphones are connected.
yyHeadphone impedance: 16
yyMax audio output: 10 mW to 15 mW
yyHeadphone jack size: 0.35 cm
Headphone
OUT
OPTICAL
DIGITAL
H/P AUDIO
(*Not Provided)
ENGLISH
ENG
Connecting a USB Drive
Connect a USB storage device such as a USB flash thumbdrive, external hard drive, or a USB
memory card reader to the TV and access the Smart Share menu to use various multimedia files.
NOTE
yyTo use Time Machine function, make sure your USB drive is connected to the USB IN 1 Time
Machine Ready port.
yySome USB Hubs may not work. If a USB device connected using a USB Hub is not detected,
connect it to the USB port on the TV directly.
(*Not Provided)
3
USB
USB IN
2
USB HUB
1
28 REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons
on the remote control. Please read this manual carefully
and use the TV correctly. To install batteries, open the
or
battery cover, replace batteries (1.5 V AAA) matching the
and ends to the label inside the compartment, and
close the battery cover. To remove the batteries, perform
the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TVs remote
sensor.
(Depending upon model)
(POWER)
Turns the TV on or off.
(User Guide)
Sees user-guide.
RATIO
ENGLISH
TV INPUT
Changes the input source. Turns the TV on if it is off.
1 2 3 TV
Returns to the last TV channel.
4 5 6 Number button
Enters numbers.
7 8 9 LIST
Accesses the saved channel list.
0 Q.VIEW - (Dash)
Inserts a dash between numbers such as 2-1 and 2-2.
LIST
Q.VIEW
FAV Tunes to the last channel viewed.
P
A
VOL CH G
E
MUTE VOL
Adjusts the volume level.
Q.MENU
FAV
INFO Accesses your favorite channel list.
SMART MY APPS
LIVE TV
REC
REMOTE CONTROL 29
INFO
Shows information on the current program.
RATIO INPUT
SMART
TV Accesses the Smart Home menu.
MY APPS
Shows the list of Apps.
1 2 3 Q.MENU
Accesses the quick menu.
7 8 9 OK
Selects menus or options and confirms your input.
0 Q.VIEW BACK
LIST Returns to the previous level.
GUIDE
FAV
Displays the program event according to time scheduler.
P
A
VOL CH G
E
EXIT
Clears all on-screen displays and returns to TV viewing.
MUTE
ENGLISH
Q.MENU
ENG
INFO
SMART MY APPS
Color buttons
These access special functions in some menus.
( : Red, : Green, : Yellow, : Blue)
OK
Control buttons ( , , , , )
Controls the SIMPLINK compatible devices (USB,SIMPLINK).
LIVE TV
Returns to the LIVE TV.
GUIDE EXIT
BACK REC
Accesses the Time Machine II menu.
SETTINGS
LIVE TV Accesses the main menu.
AV MODE
REC Selects an AV mode.
SETTINGS AV MODE
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
30 REMOTE CONTROL
SETTINGS (POWER)
Accesses the main menu. Turns the TV on or off.
INFO TV
Shows information on the Returns to the last TV channel.
current program.
Q.MENU
GUIDE Accesses the quick menu.
Displays the program event
according to time scheduler. CAPTION
Activates or deactivate the
subtitles.
SMART RATIO
Accesses the Smart Home Resizes an image.
menu.
INPUT
MY APPS Changes the input source.
Shows the list of Apps. Turns the TV on if it is off.
Navigation buttons
(up/down/left/right)
Scrolls through menus or Number button
options. Enters numbers.
OK LIST
ENGLISH
EXIT Q.VIEW
Clears all on-screen displays Alternates between the
and returns to TV viewing. two last channels selected
LIVE TV (pressing repeatedly).
AV MODE REC
AV MODE
Selects an AV mode. VOL
Adjusts the volume level.
REC
Adjusts Time Machine II FAV
mode. Accesses your favorite
channel list.
Control buttons
( , , , , )
Controls the SIMPLINK Used for viewing 3D video.
compatible devices
MUTE
(USB,SIMPLINK). Mutes all sounds.
LIVE TV
Returns to the LIVE TV. CH
Scrolls through the saved
Color buttons channels.
These access special PAGE
functions in some menus. Moves to the previous or next
( : Red, : Green, screen.
: Yellow, : Blue)
Magic Remote Control Functions 31
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TVs remote
sensor.
Pointer (RF transmitter)
Wheel (OK)
Selects menus or options and
confirms your input.
Scrolls through the saved channels.
(POWER)
If you press the navigation button Turns the TV on or off.
while moving the pointer on the
screen, the pointer disappears, and Navigation buttons
the Magic remote control works as a
ENGLISH
(up/down/left/right)
ENG
regular remote control. Scrolls through menus or
To display the pointer again, shake options.
the Magic remote control from side
to side. BACK SMART
SMART
Accesses the Smart Home
BACK menu.
Returns to the previous screen.
Voice recognition
-This is a beta version and only
available in selected functions for /Q.MENU /Q.MENU
supported models. Accesses the Universal Control.
-Network connection is required to use (Depending upon country)
the voice recognition function.
1. Press the Voice recognition button. Accesses the quick menu.
2. Speak slowly and precisely.
When a voice is recognized, the VOL CH
processing message appears on the VOL
screen. Adjusts the volume level.
Use the magic remote control no CH
further than 10 cm from your face. Scrolls through the saved
channels.
Used for viewing 3D video. (MUTE)
Mutes all sounds.
32 Magic Remote Control Functions
WATCHING TV
NOTE
yySelect Home when prompted. Store
Turning the TV on for the first mode puts the TV in demo mode.
time yyIf you select Store, the any customized
settings will switch back to the default
settings of Store in 5 minutes.
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
ENGLISH
on the remote control.
3
ENG
Follow the on-screen instructions to
customize your TV settings according to
your preferences.
Simple guide of Magic
Experience Magic
Remote Control
Remote Control
(Depending upon model)
34 Using the User guide
User Guide allows you to easily access detailed To use input device
TV information. To set time options
CHANNEL Setting To set TV lock options
1 Press SMART button to access the PICTURE, SOUND Setting
To set language
Smart Home menu. OPTION
LG SMART Function To set caption
2 Select User Guide and press the Wheel Advanced Function To set other options
Information
(OK) button.
Index Online User Guide
2 3
4 5
(Depending upon country)
between pages.
An index of key words present in the User
4 Guide.
Provides the detailed information on
ENGLISH
ENG
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
42LA6600 47LA6600
(42LA6600-SA) (47LA6600-SA)
42LA6600 47LA6600
(42LA6600-SZ) (47LA6600-SZ)
MODELS
47LA6610
ENGLISH
ENG
42LA6680 (47LA6610-SF)
(42LA6680-SD) 47LA6680
(47LA6680-SD)
Dimensions (Width x With stand 957 x 635 x 294 (mm) 1,069 x 695 x 327 (mm)
Height x Depth) Without stand 957 x 574 x 35 (mm) 1,069 x 637 x 35 (mm)
With stand 14.3 Kg 17.2 Kg
Weight
Without stand 12.4 Kg 14.7 Kg
Current Value / Power consumption 1.1 A / 110 W 1.2 A / 120 W
55LA6600
(55LA6600-SA)
MODELS
55LA6600
(55LA6600-SZ)
55LA6610
(55LA6610-SF)
Dimensions (Width x With stand 1,238 x 802 x 343 (mm)
Height x Depth) Without stand 1,238 x 733 x 35.2 (mm)
With stand 22.7 Kg
Weight
Without stand 20 Kg
Current Value / Power consumption 1.4 A / 140 W
36 SPECIFICATIONS
Horizontal Vertical
Resolution
Frequency (kHz) Frequency (Hz) Wireless LAN module (WN8122E1) specification
15.73 59.94
720 x 480i
15.73 60.00 Standard IEEE802.11a/b/g/n
31.47 59.94 2400 to 2483.5 MHz
720 x 480p
31.50 60.00 Frequency Range 5150 to 5250 MHz
5725 to 5850 MHz
720 x 576i 15.625 50.00
720 x 576p 31.25 50.00 802.11a: 16.5 dBm
Output Power 802.11b: 16 dBm
37.50 50.00 802.11g: 15.5 dBm
(Max.) 802.11n - 2.4GHz: 15.5 dBm
1280 x 720p 44.96 59.94
802.11n - 5GHz: 16.5 dBm
45.00 60.00
28.125 50.00 yyBecause band channel used by the
1920 x 1080i 33.72 59.94 country could be different, the user
33.75 60.00
can not change or adjust the operating
frequency and this product is set for the
26.97 23.976 regional frequency table.
27.000 24.000 yyContains FCC ID: BEJWN8122E1
33.71 29.97 Contains IC: 2703H-WN8122E1
1920 x 1080p 33.75 30.000
56.25 50.00 Bluetooth module (BM-LDS401) specification
67.432 59.94
67.500 60.00 Standard Bluetooth Version 3.0
Frequency Range 2400 ~ 2483.5 MHz
Output Power (Max.) 10 dBm or lower
yyVideo, which is input as below media contents is switched into the 3D screen automatically.
yyThe method for 3D digital broadcast may differ depending upon the signal environment. If video
is not switched automatically into 3D, manually convert the settings to view 3D images.
3D supported mode automatically
Horizontal Vertical
Input Signal Playable 3D video format
Frequency (kHz) Frequency (Hz)
31.469 / 31.5 S/S (Half), T&B, S/S (Full)
640 x 480
62.938 / 63 F/P, L/A
59.94 / 60
31.469 / 31.5 S/S (Half), T&B, S/S (Full)
480p
62.938 / 63 F/P, L/A
31.25 S/S (Half), T&B, S/S (Full)
576p 50
62.5 F/P, L/A
37.50 50
S/S (Half), T&B, S/S (Full)
44.96 / 45 59.94 / 60
720p
75 50
F/P, L/A
89.91 / 90 59.94 / 60
ENGLISH
ENG
28.125 50
HDMI S/S (Half), T&B, S/S (Full)
33.72 / 33.75 59.94 / 60
1080i
56.25 50
F/P, F/A
67.432 / 67.50 59.94 / 60
26.97 / 27 23.97 / 24
28.125 25 S/S (Half), T&B, S/S (Full)
33.72 / 33.75 29.976 / 30
43.94 / 54 23.97 / 24
1080p
56.25 25 F/P, L/A
67.432 / 67.5 29.976 / 30
56.25 50
S/S (Half), T&B
67.432 / 67.5 59.94 / 60
USB 1080p 33.75 30 S/S (Half), T&B,
DLNA 1080p 33.75 30 C/B, MPO (Photo), JPS (Photo)
S/S : Side by Side, S/S Full :Side by Side Full, S/S Half :Side by Side Half,
T/B : Top & Bottom, F/P : Frame Packing, F/A : Field Alternative, L/A : Line Alternative,
C/B : Checker Board, R/I : Row Interleaving, C/I: Column Interleaving, F/S : Single Frame Sequential
38 SPECIFICATIONS / external control device setup
HDMI-DTV 33.75 60
ENG
27 24
2D to 3D, S/S (Half), T&B, C/B,
28.12 25
R/I, C/I
1080p 33.75 30
56.25 50 2D to 3D, S/S (Half), T&B,
67.5 60 C/B, F/S, R/I, C/I
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
CAUTION
yyMake sure to turn the power off and disconnect the power cord and all other cables first.
yyWhen the TV is left unattended or unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
CAUTION
yyDo not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
ENGLISH
scratches on the screen and image distortions.
ENG
yyDo not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air
fresheners, lubricants, as these may damage the screens finish and cause discoloration.
yyDo not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem Solution
yyCheck the remote control sensor on the product and try again.
Cannot control the TV with
yyCheck if there is any obstacle between the product and the remote control.
the remote control.
yyCheck if the batteries are still working and properly installed ( to , to ).
yyCheck if the product is turned on.
No image display and no
yyCheck if the power cord is connected to a wall outlet.
sound is produced.
yyCheck if there is a problem in the wall outlet by connecting other products.
yyCheck the power control settings. The power supply may be interrupted.
yyCheck if the Off Time / Sleep Timer feature is activated in the Time settings.
The TV turns off suddenly.
yyIf there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
The model and serial numbers of the TV are
located on the back and one side of the TV.
Record them below should you ever need service.
MODEL
SERIAL
OWNERS MANUAL
EXTERNAL CONTROL
DEVICE SETUP
Please read this manual carefully before operating the set and retain it for
future reference.
www.lg.com
2 KEY CODES
KEY CODES
ENGLISH
ENG
Code Code
Function Note Function Note
(Hexa) (Hexa)
00 CH +, PR + R/C Button 45 Q.Menu R/C Button
01 CH -, PR - R/C Button 4C List, - (ATSC Only) R/C Button
02 Volume + R/C Button 53 List R/C Button
03 Volume - R/C Button 5B Exit R/C Button
06 > (Arrow Key / Right Key) R/C Button 61 Blue R/C Button
07 < (Arrow Key / Left Key) R/C Button 63 Yellow R/C Button
08 Power R/C Button 71 Green R/C Button
09 Mute R/C Button 72 Red R/C Button
0B Input R/C Button 79 Ratio / Aspect Ratio R/C Button
0E SLEEP R/C Button 91 AD (Audio Description) R/C Button
0F TV, TV/RAD R/C Button 7A User Guide R/C Button
10 - 19 Number Key 0 - 9 R/C Button 7C Smart / Home R/C Button
1A Q.View / Flashback R/C Button 7E SIMPLINK R/C Button
1E FAV (Favorite Channel) R/C Button 8E (Forward) R/C Button
20 Text (Teletext) R/C Button 8F (Rewind) R/C Button
21 T. Opt (Teletext Option) R/C Button AA Info R/C Button
28 Return (BACK) R/C Button AB Program Guide R/C Button
30 AV (Audio / Video) Mode R/C Button B0 (Play) R/C Button
39 Caption/Subtitle R/C Button B1 (Stop / Live TV) R/C Button
(Freeze / Slow Play /
40 (Arrow Key / Cursor Up) R/C Button BA R/C Button
Pause)
V (Arrow Key / Cursor
41 R/C Button BD (REC) R/C Button
Down)
42 My Apps R/C Button DC 3D R/C Button
43 Menu / Settings R/C Button 9F App / * R/C Button
44 OK / Enter R/C Button
* Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
(For South Korea, Japan, North America, Latin America except Colombia models)
EXTERNAL CONTROL DEVICE SETUP 3
ENGLISH
ENG
Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer
or an A/V control system) to control the products functions externally.
Note: The type of control port on the TV can be different between model series.
* Please be advised that not all models support this type of connectivity.
* Cable is not provided.
USB IN
(PC) (TV)
LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID :IN0x2008) USB to serial converter
RS-232C
which is not made nor provided by LG. (CONTROL & SERVICE)
(PC)
It can be purchased from computer stores that carry accessories for IT support professionals.(TV)
1
SERVICE ONLY
(PC) (TV)
2
1
3
(PC) (TV)
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(CONTROL & SERVICE)
IN IN
4 EXTERNAL CONTROL DEVICE SETUP
(PC) (TV)
USB USB
(PC) (TV)
RS-232C with RS-232C Cable (Legacy)
ENGLISH
RS-232C IN
Phone jack Type
ENG
(PC)
You need to purchase the phone-jack to RS-232 cable required for theIN connection between the PC and
RS-232C
(CONTROL & SERVICE)
(TV)
(PC)
the TV, which is specified in the manual. (TV)
* For other models, connect to the USB port.
ONLY ONLY
3
(PC) 1
(TV)
SERVICE
3
(PC) (TV)
SERVICE
2
2
-- This connection can only be used for the following models: 55/47/39LN5450-UA,
55/50/47/42LN5400-UA, 42/39/32LN5300-UA, and 37/32LN530B-UA.
1
3
(PC) 3
1 (TV)
RS-232C IN
(PC) 2
(CONTROL & SERVICE)
(TV)
RS-232C IN
(CONTROL & SERVICE)
2
-- This connection can only be used for the following models: 42/50PN4500-UA, 50/60PN5300-UF,
50/60PN6500-UA, and 60PN6550-UA.
Customer Computer RS-232C configurations
3-Wire Configurations(Not standard)
1 5 PC TV
RS-232C IN
RXD
(CONTROL & SERVICE) 2 2 TXD
RS-232C IN
TXD
(CONTROL & SERVICE) 3 1 RXD
GND 5 3 GND
6 9 OR
RS-232C RXD 3 2 TXD
(Serial port)
TXD 2 1 RXD
GND 5 3 GND
D-Sub 9 Phone
Set ID
For Set ID number, see "Real Data Mapping" on p.6
Communication Parameters
ENGLISH
ENG
Baud rate : 9600 bps (UART) Stop bit : 1 bit
Data length : 8 bits Communication code : ASCII code
Parity : None Use a crossed (reverse) cable.
DATA DATA
COMMAND1 COMMAND2 COMMAND1 COMMAND2
(Hexadecimal) (Hexadecimal)
01. Power off k a 00 13. Balance k t 00 to 64
14. Color
02. Aspect
k c (p.7) (Colour) x u 00 to 64
Ratio
Temperature
15. ISM
03. Screen
k d (p.7) Method (Only j p (p.8)
Mute
Plasma TV)
04. Volume 16. Energy
k e 00 to 01 j q 00 to 05
Mute Saving
05. Volume 17. Tune
k f 00 to 64 m a (p.8)
Control Command
18. Channel m b 00 to 01
06. Contrast k g 00 to 64 (Programme)
Add/Del(Skip)
07.
k h 00 to 64 19. Key m c Key Codes
Brightness
20. Control m g 00 to 64
08. Color/ Back Light,
k i 00 to 64
Colour Control Panel
Light
21. Input x b (p.10)
09. Tint k j 00 to 64
select (Main)
10. 22. 3D (Only x t (p.11)
k k 00 to 32
Sharpness 3D models)
23. Extended x v (p.11)
11. OSD
k l 00 to 01 3D (Only 3D
Select
models)
12. Remote
Control Lock k m 00 to 01
Mode
* Note: During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are
not executed and treated as NG.
6 EXTERNAL CONTROL DEVICE SETUP
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the
data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-
viable functions or communication errors.
* When you enter the [data] in hexadecimal, refer to following conversion table.
* Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.
00 : Step 0 32 : Step 50 (Set ID 50) FE : Step 254
01 : Step 1 (Set ID 1) 33 : Step 51 (Set ID 51) FF : Step 255
... ... ...
0A : Step 10 (Set ID 10) 63 : Step 99 (Set ID 99) 01 00 : Step 256
... ... ...
0F : Step 15 (Set ID 15) C7 : Step 199 27 0E : Step 9998
10 : Step 16 (Set ID 16) C8 : Step 200 27 0F : Step 9999
... ... ...
EXTERNAL CONTROL DEVICE SETUP 7
ENGLISH
ENG
01. Power (Command: k a) * In case of video mute on only, TV will display On
To control Power Off of the set. Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
04. Volume Mute (Command: k e)
To control volume mute on/off.
To Show Power On. (Works TV is On Only) You can also adjust mute using the MUTE button
Transmission [k][a][ ][Set ID][ ][FF][Cr] on remote control.
Ack [a][ ][Set ID][ ][OK][01][x] Transmission [k][e][ ][Set ID][ ][Data][Cr]
* Similarly, if other functions transmit FF data Data 00 : Volume mute on (Volume off)
based on this format, Acknowledgement feedback 01 : Volume mute off (Volume on)
presents status about each function. Ack [e][ ][Set ID][ ][OK/NG][Data][x]
To adjust the screen tint. To adjust colour temperature. You can also adjust
ENG
You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Red : 00 to Green : 64 Data Min : 00 to Max : 64
Ack [j][ ][Set ID][ ][OK/NG][Data][x] Ack [u][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k) 15. ISM Method (Command: j p) (Only Plasma TV)
To adjust the screen sharpness. To control the ISM method. You can also adjust
You can also adjust sharpness in the PICTURE ISM Method in OPTION menu.
menu. Transmission [j][p][ ][Set ID][ ][Data][Cr]
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 02: Orbiter
Data Min : 00 to Max : 32 08: Normal
Ack [k][ ][Set ID][ ][OK/NG][Data][x] 20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]
* Analogue Terrestrial/Cable
13. Balance (Command: k t)
To adjust balance. [Data 00][Data 01] Channel Data
You can also adjust balance in the AUDIO menu. Data 00 : High byte channel data
Data 01 : Low byte channel data
Transmission [k][t][ ][Set ID][ ][Data][Cr]
- 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data Min : 00 to Max : 64
Data 02 : Input Source (Analogue)
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
- 00 : Terrestrial TV (ATV)
- 80 : Cable TV (CATV)
EXTERNAL CONTROL DEVICE SETUP 9
ENGLISH
- 00 : Terrestrial TV (ATV)
ENG
[Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV)
Data 00 : High Channel data * Digital Terrestrial/Cable
Data 01 : Low Channel data
- 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 00 : xx (Don't care)
Data 02 : Input Source (Digital) [Data 01][Data 02]: Major Channel Number
- 10 : Terrestrial TV (DTV) Data 01 : High byte Channel Data
- 20 : Terrestrial Radio (Radio) Data 02 : Low byte Channel Data
- 40 : Satellite TV (SDTV) - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
- 50 : Satellite Radio (S-Radio) [Data 03][Data 04]: Minor Channel Number
- 90 : Cable TV (CADTV) Data 03 : High byte Channel Data
- a0 : Cable Radio (CA-Radio) Data 04 : Low byte Channel Data
[Data 01][Data 02]: Major Channel Number 20. Control Back Light (Command: m g)
ENGLISH
Data 02: Low byte Channel Data To control the back light.
- 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
Transmission [m][g][ ][Set ID][ ][Data][Cr]
[Data 03][Data 04]: Minor/Branch Channel Number
Data Min : 00 to Max : 64
(Dont care in Satellite)
Data 03: High byte Channel Data Ack [g][ ][Set ID][ ][OK/NG][Data][x]
Data 04: Low byte Channel Data
40 : Component1 41 : Component2
ENGLISH
(Depending on model) (Depending on model)
ENG
To change 3D mode for TV. To change 3D option for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] Transmission [x][v][ ][Set ID][ ][Data 00][ ]
[ ][Data 02][ ][Data 03][Cr] [Data 01][Cr]
[Data 00] [Data 01] [Data 02] [Data 03] 4) When [Data 00] is 09
00 O O X 00 : Standard 01 : Sport
02 : Cinema 03 : Extreme
01 X X X 04 : Manual
02 X X X
Ack [v][ ][Set ID][ ][OK][Data00][Data01][x]
03 X X O
[v][ ][Set ID][ ][NG][Data00][x]
X : dont care
www.lg.com
2 INSTRUCCIONES DE SEGURIDAD IMPORTANTES
PARA REDUCIR EL RIESGO DE DESCARGAS yyNo use el aparato cerca del agua.
ELCTRICAS, NO QUITE LA CUBIERTA
(O LA PARTE POSTERIOR). EL USUARIO
NO PUEDE CAMBIAR NI REPARAR LOS
COMPONENTES INTERNOS. CONSULTE
NICAMENTE AL PERSONAL DE SERVICIO yyLimpie nicamente con un pao seco.
CALIFICADO.
ElWARNING/CAUTION
smbolo de relmpago con una
punta de flecha, dentro de un tringulo
RISK OF ELECTRIC SHOCK yyNo tape ni bloquee las aberturas de
equiltero, tiene como fin alertar al
DO NOT OPEN
DO NOT OPEN
central, estufas u otro tipo de aparatos que
ENG
ESPAOL
yyConsulte todas las cuestiones de servicio que est suelto o daado. Al desenchufar el
ENG
de mantenimiento al personal de servicio cable, asegrese de hacerlo desde el enchufe.
calificado. El servicio es necesario cuando No tire del cable para desenchufar el televisor.
el aparato sufre algn tipo de dao, por
ejemplo, cuando un cable de suministro
elctrico o un conector est daado, se
derrama lquido o se cae un objeto dentro Power Supply
del aparato, el aparato se expone a la lluvia
Short-circuit yyAdvertencia - para disminuir los riesgos de
Breaker
o a la humedad, no funciona en forma incendio o descargas elctricas, no exponga el
normal o sufre una cada. producto a la lluvia, la humedad u otro tipo de
lquidos. No toque el televisor con las manos
mojadas. No instale el producto cerca de
objetos inflamables como combustible o velas,
ni lo exponga al aire acondicionado directo.
yyNo inserte objetos de metal u otro material
conductor en el cable de alimentacin. No
toque el extremo del cable de alimentacin
mientras est enchufado.
yyMantenga el material de embalaje contra yyNo exponga el producto a ningn tipo de
la humedad y el embalaje de vinilo fuera goteo ni salpicaduras, y no coloque sobre
del alcance de los nios. El material contra o por encima del televisor (por ejemplo, en
Power Supply
la humedad es daino si se ingiere. Si estantes que pudieran encontrarse
Short-circuit arriba
Breaker
se ingiere por accidente, obligue a la de la unidad) ningn tipo de objeto que
persona a vomitarlo y acuda al hospital ms contenga lquido, como floreros, tazas, etc.
cercano. Adems, el embalaje de vinilo
puede provocar asfixia. Mantngalo fuera
del alcance de los nios. Power Supply
Short-circuit
Breaker
Power Supply
Short-circuit
Breaker
4 INSTRUCCIONES DE SEGURIDAD IMPORTANTES
ESPAOL
largos periodos, las aberturas de ventilacin
ENG
pueden calentarse. Esto no afecta el
rendimiento ni causa defectos en el
producto.
yySi siente que el televisor est fro al
tocarlo, es posible que ocurra un pequeo
parpadeo cuando lo prenda. Se trata de
algo normal y no significa que el televisor
est daado. Tambin es posible que
aparezcan pequeos puntos en la pantalla,
de color rojo, verde o azul. Sin embargo,
no afectan el rendimiento del televisor.
No toque la pantalla LCD ni coloque los
dedos sobre ella durante mucho tiempo.
Esto podra producir algunos efectos de
distorsin temporales en la pantalla.
6 INSTRUCCIONES DE SEGURIDAD IMPORTANTES
LICENCIAS
Las licencias admitidas pueden variar segn el modelo.
Para obtener ms informacin sobre las licencias, visite www.lg.com .
ESPAOL
Rovi Corporation o sus subsidiarias y se utilizan bajo licencia.
ENG
Cubierto por una o ms de las siguientes patentes de los Estados Unidos:
7,295,673; 7,460,668; 7,515,710; 7,519,274.
Fabricado bajo licencia con los nmeros de patente de los EE.UU: 5,956,674;
5,974,380; 6,487,535 y otras patentes emitidas y pendientes en todo
el mundo. DTS, el smbolo & DTS y el smbolo en conjunto son marcas
comerciales registradas & DTS 2.0+Digital Out es una marca comercial de
DTS, Inc. El producto incluye el software. DTS, Inc. Todos los derechos
reservados.
contenido
2 INSTRUCCIONES DE SEGURIDAD 28 CONTROL REMOTO
IMPORTANTES
6 Ver imgenes en 3D (en televisores 3D) 31 Funciones del control
remoto Mgico
7 LICENCIAS
32 Cmo registrar el control remoto Mgico
32 Cmo utilizar el control remoto Mgico
7 AVISO SOBRE SOFTWARE DE 32 Precauciones que debe seguir al utilizar
CDIGO ABIERTO el control remoto Mgico
33 MIRAR TV
8 contenido
33 Encender el televisor por primera vez
18 ESTABLECER CONEXIONES
39 SOLUCIN DE PROBLEMAS
18 Conexin de una antena o un cable
19 Conexin a un receptor de HD,
reproductor de DVD o VCR
19 - Conexin HDMI
20 - Conexin DVI a HDMI NOTA
21 - Conexin a un telfono mvil
yyLa imagen puede ser diferente a la de su
22 - Conexin por componente televisor.
23 - Conexin compuesta yyEl OSD (On Screen Display, Despliegue
24 Conexin a un dispositivo PC En la Pantalla) de su TV puede ser un poco
24 - Conexin HDMI o Conexin DVI a diferente que este manual.
HDMI yyLos mens y las opciones disponibles
26 Conexin a un sistema de audio pueden variar segn la fuente de entrada
que utilice.
26 - Conexin de audio ptica digital
yyEs posible que se agreguen nuevas
27 Conectar a un auricular
funciones a este televisor en el futuro.
27 Cmo conectar un dispositivo USB
PROCEDIMIENTO DE INSTALACIN / MONTAJE Y PREPARACIN 9
PROCEDIMIENTO DE INSTALACIN
1 Abra el paquete y asegrese de que todos los accesorios estn incluidos.
MONTAJE Y PREPARACIN
Desempacar
Verifique que la caja del producto contenga los siguientes elementos. Si falta algn accesorio,
comunquese con el distribuidor local mediante el cual adquiri el producto. Las ilustraciones de este
manual pueden diferir del producto que usted adquiri.
PRECAUCIN
yyNo use ningn producto no autorizado para garantizar la seguridad y la vida til del producto.
yyNingun dao o lesiones por el uso de elementos no autorizados no estn cubiertos por la
garanta.
ESPAOL
yyAlgunos modelos parecen tener una pelcula fina sobre la pantalla. Esta forma parte de la
ENG
pantalla, as que no la retire.
NOTA
yyLos artculos suministrados con el producto adquirido pueden variar segn el modelo.
yyEs posible que cambien las especificaciones del producto o el contenido del manual sin previo
aviso debido a las actualizaciones de las funciones del producto.
yyPara que la conexin sea ptima, los cables HDMI y los dispositivos USB tienen que tener
biseles que no superen los 10 mm de espesor y 18 mm de ancho.
yyUtilice un cable de extensin que sea compatible con USB 2.0, en caso de que el cable USB o
la tarjeta de memoria USB no encajen en el puerto USB del TV.
B
B
A A
*A 10 mm
*B 18 mm
10 MONTAJE Y PREPARACIN
(Para 42/47LA6600,
47LA6610, 42/47LA6680) (Para 42LA6600, 42LA6680)
ESPAOL
ENG
Tag On
Tag On Blu-Ray
MONTAJE Y PREPARACIN 11
Complementos opcionales
Los complementos opcionales se pueden cambiar o modificar para mejorar la calidad, sin necesidad
de aviso previo.
Para adquirir estos elementos, comunquese con su distribuidor.
Estos dispositivos solo funcionarn en ciertos modelos.
Es posible que el nombre o el diseo del modelo hayan cambiado, debido a las circunstancias o
polticas del fabricante.
Tag On
ESPAOL
ENG
AG-F***DP Dispositivo de audio de LG Tag On
Anteojos Dual Play
AN-BL***
IR Blaster inalmbrico
(Segn el modelo)
12 MONTAJE Y PREPARACIN
Componentes y botones
Pantalla
Botn
OK
SETTINGS
INPUT
Bocinas
Sensor del control remoto
Luz del logotipo
ESPAOL
ENG
Botn Descripcin
/ (^ / v) Permite desplazarse por los canales guardados.
(SETTINGS) Permite acceder a los mens principales o guardar las entradas y salir de los mens.
NOTA
yyRetirar el plstico protector en la parte inferior de la TV
(Segn el modelo)
El plstico protector se aplica a la parte frontal de la TV para
protegerla de rallones u otros daos durante su traslado.
Cuando el televisor est instalado, retire el plstico protector
de la parte inferior del gabinete.
ppps
MONTAJE Y PREPARACIN 13
PRECAUCIN
yyNo toque la pantalla. De lo contrario, yyAl transportar el televisor, no lo someta a
podra daarla. sacudones o vibracin excesiva.
yyAl transportar el televisor mantngalo en
yySe recomienda trasladar el televisor en la posicin vertical, nunca lo apoye sobre
caja o el material de embalaje en el que lo uno de los costados, ni lo incline hacia la
recibi al comprarlo. derecha o la izquierda.
yyAntes de mover o levantar el televisor,
desconecte el cable de alimentacin y el
resto de los cables.
yyCuando sostenga el televisor, la pantalla
debe quedar alejada de usted para evitar
algun dao.
ESPAOL
ENG
yySostenga con firmeza la parte superior e
inferior del marco del televisor. Asegrese
de no sostenerlo por la parte transparente,
por la bocina o por el rea de rejillas de las
bocinas.
14 MONTAJE Y PREPARACIN
Configurar el televisor
Puede instalar su TV en la pared o si desea colocar la TV en un centro de entretenimiento u otro
mueble, colquele la base.
Si no instala el televisor en una pared, siga estas instrucciones para colocar la base de la televisin.
PRECAUCIN
yyAl instalar la base del televisor, ponga la pantalla hacia abajo sobre una mesa acolchada o una
superficie plana para evitar rayas.
yyAsegrese de que los tornillos estn completamente ajustados. (Si no estn lo suficientemente
ajustados, el TV puede inclinarse hacia delante despus de instalarse.)
yyNo ajuste los tornillos con demasiada fuerza, de lo contrario, se pueden desgastar y aflojar.
NOTA
yyAntes de montar el televisor en la pared, retire la base, realizando la instalacin de sta en
orden inverso.
4 PZ
1 M4 x 14
3
4 PZ
ESPAOL
ENG
M4 x 14
Cuerpo de Parte
Soporte frontal
Base Soporte
2
MONTAJE Y PREPARACIN 15
10 cm
10 cm
10 cm Parte Front
delantera Parte Rear
posterior
10 cm
ESPAOL
3 Cuando haya fijado la TV, acerque la mesa a
ENG
la pared. Los nios podran resultar heridos.
Ajuste el ngulo del TV para una mejor
visibilidad
15 15
(Para 42LA****) (Para 47LA****)
M4 X 8 P4 X 8
2 PZ 2 PZ
advertencia
yyPara evitar que se caiga el televisor,
asegrelo al piso o a la pared conforme a
las instrucciones de instalacin. Inclinar,
sacudir o balancear el televisor puede
provocar daos.
16 MONTAJE Y PREPARACIN
PRECAUCIN Sujetacables
yyAsegrese de que los nios no se suban
al televisor ni se cuelguen de l.
NOTA
yyUtilice una plataforma o un armario que
sea lo suficientemente fuerte y grande Organizador de cables
para sostener el televisor de manera
segura. PRECAUCIN
yyLos soportes, los tornillos y los cordones yyNo mueva el televisor tirando del
son opcionales. Puede solicitar otros sujetacables y el organizador de cables
accesorios a travs de su distribuidor local. dado que podra romperse y provocarle
lesiones o daar el televisor.
MONTAJE Y PREPARACIN 17
Montar en la pared
Soporte de pared (opcional)
Se puede usar un soporte de pared opcional LSW430B
con el televisor LG. Consulte al distribuidor local
para adquirir un soporte de pared que cumpla
con el estndar VESA que usa su modelo de TV.
Cuidadosamente coloque el soporte de pared
en la parte posterior del TV. Instale el soporte de MSW240
pared en una pared slida, perpendicular al piso.
Si va a instalar el TV sobre otros materiales de
construccin, pngase en contacto con personal
tcnico calificado para instalar el soporte de
pared. El soporte de pared incluir instrucciones
detalladas. Recomendamos que use un soporte
de pared de marca LG.
PRECAUCIN
yyAntes de mover o instalar el televisor,
desconecte el cable de alimentacin. De
10 cm lo contrario, podra provocar una descarga
elctrica.
10 cm yySi instala el televisor en el cielo raso o
10 cm en una pared inclinada, podra caerse
y provocar lesiones graves. Utilice un
10 cm soporte de pared autorizado por LG y
comunquese con el distribuidor local o
con personal tcnico calificado.
yyNo ajuste excesivamente los tornillos,
dado que podra daar el televisor y anular
ESPAOL
Asegrese de usar tornillos y soportes de pared la garanta.
ENG
que cumplan con el estndar VESA. En la tabla yyUtilice tornillos y soportes de pared que
siguiente se detallan las dimensiones de los cumplan con la norma VESA. La garanta
conjuntos de montaje de pared. no cubre daos o lesiones provocados
por el uso incorrecto del aparato o de
Modelo 42/47/55LA6600 accesorios no autorizados.
47/55LA6610
42/47LA6680
NOTA
VESA (A x B) 400 x 400 yyUtilice los tornillos enumerados en las
A especificaciones del estndar VESA.
B yyEl conjunto de montaje de pared incluye
un manual de instalacin y las piezas
necesarias.
Tornillo estndar M6 yyEl soporte de pared es opcional.
Para obtener accesorios adicionales,
Cantidad de 4
comunquese con su distribuidor local.
tornillos
yyLa longitud de los tornillos puede variar
Soporte de pared MSW240 segn el tipo de soporte de pared.
(opcional) LSW430B Asegrese de utilizar la longitud adecuada.
yyPara obtener ms informacin, consulte
el manual suministrado con el montaje de
pared.
18 ESTABLECER CONEXIONES
ESTABLECER CONEXIONES
Conecte varios dispositivos externos al televisor y cambie los modos de entrada para seleccionar
un dispositivo externo. Para obtener ms informacin sobre cmo conectar dispositivos externos,
consulte sus respectivos manuales. Entre los dispositivos externos disponibles pueden mencionarse
los siguientes: receptores de HD, reproductores de DVD, VCR, sistemas de audio, dispositivos de
almacenamiento USB, PC, dispositivos de juegos, etc.
NOTA
yySi graba un programa de TV en una grabadora de DVD o VCR, asegrese de conectar el cable
de entrada de seal al televisor a travs de uno de estos dos dispositivos. Para obtener ms
informacin acerca de la grabacin, consulte el manual proporcionado con el dispositivo conectado.
yyLas conexiones de dispositivos externos que se muestran pueden ser levemente diferentes de
las ilustraciones en este manual.
yyConecte los dispositivos externos al televisor independientemente del orden del puerto del aparato.
ANTENNA
IN
yySi conecta un dispositivo de juegos al TV, utilice el cable que se proporciona con dicho dispositivo.
yyConsulte el manual del equipo externo para conocer las instrucciones de funcionamiento.
Antena VHF
Antena UHF
ESPAOL
ENG
Antena Enchufe
ANTENNA
IN Coaxial (75) o CABLE
IN Coaxial (75)
de pared
(*No incluido)
(*No incluido)
Terminal
PRECAUCIN NotA
yyAsegrese de no doblar el alambre de yyPara mejorar la calidad de imagen en
cobre del cable de RF. un area de baja seal, favor de comprar
un amplificador de seal e instalar
adecucadamente.
yyUtilice un divisor de seal para ms de 2
Alambre de cobre televisores.
yySi la antena no est correctamente
instalada, pngase en contacto con su
yyPrimero conecte
CABLE todos los dispositivos
IN distribuidor.
entre s y luego conecte el cable de
yyCdec de audio DTV compatible: MPEG,
alimentacin al tomacorriente, para que
Dolby digital, AAC, HE-AAC
el televisor no resulte daado.
ESTABLECER CONEXIONES 19
Conexin HDMI
NOTA
yyUtilice el cable HDMI de alta velocidad ms reciente con la funcin CEC (control electrnico
por parte del cliente).
yyLos cables HDMI de alta velocidad estn probados para transportar seales HD de hasta 1
080 progresivo y superiores.
yyFormato de audio HDMI compatible: Dolby Digital, PCM (hasta 192 kHz, 32 kHz /44,1 kHz / 48
kHz / 96 kHz / 192 kHz), DTS.
ESPAOL
ENG
HDMI
(*No incluido)
/DVI IN
2
Transmite las seales de video digital de un dispositivo externo al televisor. Conecte el dispositivo
externo y el televisor con el cable DVI-HDMI tal como se muestra en la siguiente ilustracin. Para
transmitir una seal de audio, conecte un cable de audio.
NOTA
yyAl utilizar un cable HDMI/DVI, slo es compatible con un enlace nico de DVI.
3 (MHL)
(*No incluido)
/DVI IN
2
1(ARC)
/AV IN
PC-AUDIO IN
BLANCO
ROJO
DVI OUT
El enlace de alta definicin mvil (MHL, por sus siglas en ingls) es una interfaz de transmisin de
seales audiovisuales digitales de telfonos mviles a televisores.
NOTA
yyConecte el telfono mvil al puerto HDMI/DVI IN 3 (MHL) para ver la pantalla del telfono en el TV.
yyEsto solo funciona en telfonos habilitados con MHL.
yyCon telfonos mviles compatibles con MHL, puedes usar el control remoto del TV para controlar
el telfono.
yySe necesita el cable MHL pasivo para conectar el TV y un telfono mvil.
yyQuite el cable MHL del TV cuando:
- la funcin MHL no est funcionando.
- su dispositivo mvil est completamente cargado en modo de espera.
Cable
MHL MHL
Cable
3 (MHL)
(*No Provided)
(*Not incluido)
Telfono mvil
Mobile phone
ESPAOL
ENG
22 ESTABLECER CONEXIONES
Transmite las seales de audio y video analgicas de un dispositivo externo al televisor. Conecte
el dispositivo externo y el televisor con el cable componente tal como se muestra en la siguiente
ilustracin.
NOTA
yySi la instalacin de los cables no es la adecuada, podra proyectarse una imagen en blanco y
negro o con colores distorsionados.
yyRevise y compruebe que los cables coincidan con las conexiones de color correspondientes.
PC-AUDIO IN
VERDE
AZUL
ROJO
BLANCO
ROJO
ESPAOL
ENG
(*No incluido)
(*No incluido)
BLANCO
VERDE
ROJO
ROJO
AZUL
L R
VIDEO AUDIO
Conexin compuesta
Transmite las seales de audio y video analgicas de un dispositivo externo al televisor. Conecte
el dispositivo externo y el televisor con el cable compuesto tal como se muestra en la siguiente
ilustracin.
NOTA
yySi posee una VCR monofnica, conecte el cable de audio de la VCR a la toma AUDIO L/MONO
del televisor.
yyRevise y compruebe que los cables coincidan con las conexiones de color correspondientes.
PC-AUDIO IN
AMARILLO
BLANCO
ROJO
ESPAOL
ENG
(*Not Provided)
AMARILLO
BLANCO
ROJO
Conexin a un dispositivo PC
NOTA
yySe recomienda utilizar el televisor con la conexin HDMI para obtener una calidad de imagen
ptima.
yySegn la tarjeta grfica, es posible que no funcione el modo DOS cuando se utiliza un cable
HDMI a DVI.
yyEn el modo PC, es posible que exista ruido asociado con la resolucin, patrones verticales,
contraste o brillo. Si se producen ruidos, cambie la resolucin de la salida de la PC, cambie la
frecuencia de actualizacin o ajuste el brillo y el contraste en el men IMAGEN hasta que la
imagen mejore.
yyLa forma de onda de la entrada de sincronizacin para las frecuencias horizontales y verticales
es diferente.
yySegn la tarjeta grfica, es posible que algunos ajustes de resolucin no permitan que la
imagen se ubique en la pantalla de forma correcta.
yySi esta usando la salida DVI de una PC, tiene que conectar el audio anlogo por separado.
Tome como referencia las instrucciones de la siguiente pgina.
yyAl utilizar un cable HDMI/DVI, slo es compatible con un enlace nico de DVI.
HDMI
(*No incluido)
/DVI IN
2
PC
1(ARC)
MHL)
HDMI
3
/DVI IN
2
ESTABLECER CONEXIONES 25
1(ARC)
Mtodo B: Conexin DVI a HDMI
3 (MHL)
(*No incluido)
/DVI IN
2
1(ARC)
/AV IN
PC-AUDIO IN
BLANCO
ROJO
ESPAOL
ENG
PC
(PC)
(PC) (RGB/HDMI-PC)
(RGB/HDMI-PC)
RGB
RGB AUDIO
AUDIO
NOTA
yyNo mire hacia el puerto de salida ptica. Mirando el rayo lser puede daar su visin.
yyAudio de ACP (Proteccin de copiar Audio) puede bloquear la funcin de salida de audio digital.
ESPAOL
OUT
ENG
OPTICAL
DIGITAL
H/P AUDIO
(*No incluido)
OPTICAL AUDIO IN
Conectar a un auricular
Escucha el sonido travs de un auricular.
NOTA
yyLas opciones del men de audio son desactivadas cuando se conecta el auricular.
yyCuando se Cambia a MODO AV con el auricular conectado, el cambio es aplicado para video
no para audio.
yyLa Salida de Audio Optico Digital no esta disponible cuando se conecta el auricular.
yyImpedancia del auricular: 16
yySalida Maxima de audio: 10mW a 15mW
yyTamao del jack del auricular: 0,35 cm
Auricular
OUT
OPTICAL
DIGITAL
H/P AUDIO
(*No incluido)
ESPAOL
Conecte un dispositivo de almacenamiento USB como una memoria USB Flash, un disco duro
ENG
externo o un lector de tarjetas de memoria USB al televisor.
NOTA
yyPara utilizar la funcin mquina del tiempo, asegrese de que est conectado al puerto USB IN 1
Time Machine Ready.
yyEs posible que algunos concentradores USB no funcionen. Si no se detecta un dispositivo USB
conectado mediante un concentrador USB, conctelo directamente al puerto USB del TV.
(*No incluido)
3
USB
USB IN
2
1
USB HUB
28 CONTROL REMOTO
CONTROL REMOTO
Las descripciones que figuran en este manual se basan en
los botones del control remoto.
Lea atentamente este manual y siga las instrucciones de
uso. Para reemplazar las bateras, abra la cubierta de la o
batera, coloque otras (AAA de 1,5 Vcc) y haga coincidir la
polaridad y en el compartimiento, luego cierre la tapa.
Asegrese de apuntar con control remoto al sensor de
control remoto en el televisor.
PRECAUCIN
yyNo use bateras nuevas junto con otras usadas, ya que esto puede daar el control remoto.
Este control remoto utiliza luz infrarroja. Al usarlo, es necesario apuntarlo en direccin al sensor
remoto del TV.
(Segn el modelo)
(ENCENDIDO)
Enciende o apaga el televisor.
(Gua del Usuario)
Consulta la Gua del usuario.
RATIO INPUT
RATIO
Cambia el tamao de una imagen.
TV
INPUT
Cambia la fuente de entrada. Enciende la TV si est apagada.
1 2 3 TV
ESPAOL
4 5 6 Botones Numricos
Permiten introducir nmeros.
7 8 9 LIST
Permite acceder a la lista de canales guardados.
0 Q.VIEW - (Guin)
Inserta un guin entre los nmeros, por ejemplo, 2-1 y 2-2.
LIST
Q.VIEW
FAV Permite alternar entre los dos ltimos canales seleccionados (al
P
A
presionarlo repetidamente).
VOL CH G
E
MUTE VOL
Ajusta el nivel del volumen.
Q.MENU
FAV
INFO
SMART MY APPS Permite acceder a la lista de canales favoritos.
LIVE TV
REC
CONTROL REMOTO 29
INFO
Muestra informacin del programa actual.
RATIO INPUT
SMART
TV Permite acceder al men Smart Home.
MY APPS
Muestra la lista de aplicaciones.
1 2 3 Q.MENU
Permite acceder al men rpido.
4 5 6 Botones de navegacin
(hacia arriba/hacia abajo/hacia la derecha/hacia la izquierda)
0 Q.VIEW
Permite seleccionar mens u opciones y confirmar lo ingresado.
BACK
LIST
Permite volver al nivel anterior.
FAV GUIDE
P
A
Muestra el evento de programa segn la hora programada.
VOL CH G
E
EXIT
MUTE Borra todo lo que muestra la pantalla y se regresa a aver la
Q.MENU televisin.
INFO
SMART MY APPS
Botones de color
Estos accesos de funciones especiales son en algunos mens.
ESPAOL
( : Rojo, : Verde, : Amarillo, : Azul
OK
ENG
Botones de control ( , , , , )
Permiten controlar los dispositivos compatibles con SIMPLINK
(USB, SIMPLINK).
LIVE TV
GUIDE EXIT Regresa al canal en vivo.
BACK
REC
Ajusta el tiempo al modo Time Machine II.
LIVE TV SETTINGS
Permite acceder a los principales mens.
REC AV MODE
Selecciona un modo de audio y video.
SETTINGS AV MODE
(Segn el modelo)
SETTINGS (ENCENDIDO)
Permite acceder a los principales Enciende o apaga el televisor.
mens.
TV
INFO Regresa al ltimo canal de
Muestra informacin del programa televisin.
actual.
Q.MENU
GUIDE Permite alternar entre los dos
Muestra el evento de programa ltimos canales seleccionados
segn la hora programada. (al presionarlo repetidamente).
CAPTION
Activa o desactiva los
subttulos.
SMART
Permite acceder al men Smart RATIO
Home. Cambia el tamao de una
MY APPS imagen.
Muestra la lista de aplicaciones. INPUT
Cambia la fuente de entrada.
Botones de navegacin Enciende la TV si est
(hacia arriba/hacia abajo/hacia la apagada.
derecha/hacia la izquierda)
Permiten desplazarse por los Botones Numricos
mens o las opciones. Permiten introducir nmeros.
GUIDE
OK LIST
Permite seleccionar mens u Permite acceder a la lista de
opciones y confirmar lo ingresado. SMART MY APPS canales guardados.
- (Guin)
BACK Inserta un guin entre los
ESPAOL
EXIT 2-2.
Borra todo lo que muestra la LIVE TV Q.VIEW
pantalla y se regresa a aver la AV MODE REC Permite alternar entre los dos
televisin. ltimos canales seleccionados
(al presionarlo repetidamente).
AV MODE
Selecciona un modo de audio y VOL
video. Ajusta el nivel del volumen.
REC FAV
Ajusta el tiempo al modo Time Permite acceder a la lista de
Machine II. canales favoritos.
Botones de control
( , , , , ) Permite ver videos 3D.
Permiten controlar los dispositivos
compatibles con SIMPLINK (USB, MUTE
Silencia todos los sonidos.
SIMPLINK).
Mutes all sounds.
LIVE TV
Regresa al canal en vivo. CH
Permite desplazarse por los
Botones de color canales guardados.
Estos accesos de funciones PAGE
especiales son en algunos mens. Permite ir a la pantalla anterior
( : Rojo, : Verde, o siguiente.
: Amarillo, : Azul)
Funciones del control remoto Mgico 31
PRECAUCIN
yyNo use bateras nuevas junto con otras usadas, ya que esto puede daar el control remoto.
Este control remoto utiliza luz infrarroja. Al usarlo, es necesario apuntarlo en direccin al sensor
remoto del TV.
Puntero (transmisor de RF)
Rueda (OK)
Permite seleccionar mens u
opciones y confirmar lo ingresado.
Permite desplazarse por los canales (ENCENDIDO)
guardados. Si presiona el botn Enciende o apaga el TV.
de navegacin mientras mueve el
puntero en la pantalla, el puntero Botones de navegacin
desaparecer y el control remoto (hacia arriba/hacia abajo/hacia
Mgico funcionar como un control la derecha/hacia la izquierda)
remoto normal. Para volver a ver el Permiten desplazarse por los
puntero, sacuda el control remoto mens o las opciones.
Mgico de un lado a otro. BACK SMART
SMART
ESPAOL
BACK Permite acceder al men
ENG
Regresa a la pantalla anterior. Smart Home.
Cmo volver a registrar el control remoto Mgico 2 Puede seleccionar el men My Apps.
MIRAR TV NOTA
yySeleccione Hogar cuando aparezca. El
modo Tienda coloca el TV en el modo
Encender el televisor por demo.
primera vez yySi selecciona Tienda, los ajustes
personalizados se regresaran al ajuste de
Tienda en 5 minutos.
Al encender el televisor por primera vez, aparece
la pantalla de configuracin inicial. Seleccione
un idioma y personalice la configuracin bsica.
4 Una vez finalizada la configuracin bsica,
1 Conecte el cable de alimentacin a un presione el botn Rueda (OK).
tomacorriente.
ESPAOL
ENG
Seleccin del Entorno Selecciona Hogar para el
hogar.
Conexin de red Configura la red para habilitar
la funcin relacionada con la
red en el TV.
Sintonizacin Busca y guarda
automticamente los
automtica canales disponibles.
Configuracin Confirma las opciones de
configuracin.
finalizada
Gua sencilla del Control
Disfrute del Control Remoto Mgico
Remoto Mgico (Segn el modelo)
34 Cmo utilizar la Gua del usuario
2 Seleccione Gua del Usuario y presione el ndice Gua del Usuario en lnea
Rueda (OK). 2 3
4 5
(Depende del pas)
ESPECIFICACIONES
Las especificaciones del producto pueden cambiar sin previo aviso debido a las actualizaciones de
las funciones de los productos,
42LA6600 47LA6600
(42LA6600-SA) (47LA6600-SA)
42LA6600 47LA6600
(42LA6600-SZ) (47LA6600-SZ)
MODELOS
47LA6610
42LA6680 (47LA6610-SF)
(42LA6680-SD) 47LA6680
(47LA6680-SD)
Dimensiones Con base 957 x 635 x 294 (mm) 1 069 x 695 x 327 (mm)
(Ancho x altura x
ESPAOL
profundidad) Sin base 957 x 574 x 35 (mm) 1 069 x 637 x 35 (mm)
ENG
Con base 14,3 Kg 17,2 Kg
Peso
Sin base 12,4 Kg 14,7 Kg
Corriente de consumo /
1,1 A / 110 W 1,2 A / 120 W
Consumo de la potencia
55LA6600
(55LA6600-SA)
55LA6600
MODELOS
(55LA6600-SZ)
55LA6610
(55LA6610-SF)
Dimensiones Con base 1 238 x 802 x 343 (mm)
(Ancho x altura x
profundidad) Sin base 1 238 x 733 x 35,2 (mm)
Formatos 3D admitidos
yySe requiere que los contenidos multimedia y el reproductor sean compatibles con HDMI 3D
Frame Packing, HDMI 3D Lado a lado, HDMI 3D Arriba y abajo para la reproduccin en 3D.
yyEl video, en formato HDMI 3D Frame Packing, HDMI 3D Lado a lado, HDMI 3D Arriba y abajo
de entrada, se convierte automticamente en la pantalla 3D.
37,50 50
S/S (Half), T&B, S/S (Full)
720 44,96 / 45 59,94 / 60
progresivo 75 50
F/P, L/A
89,91 / 90 59,94 / 60
28,125 50
HDMI S/S (Half), T&B, S/S (Full)
1080 33,72 / 33,75 59,94 / 60
entrelazado 56,25 50
ESPAOL
F/P, F/A
ENG
67,5 59,94 / 60
26,97 / 27 23,97 / 24
28,125 25 S/S (Half), T&B, S/S (Full)
33,72 / 33,75 29,976 / 30
S/S: Lado a lado, S/S Full: Lado a lado Full, S/S Half: Lado a lado (mitad),
T/B: Arriba y abajo, F/P: Marco de embalaje, F/A: Campo alternativo, L/A: Linea alternativa,
C/B: Ajuste de borde, R/I: Intercalado de lineas, C/I: Intercalado de columnas, F/S: Secuencial de
marco nico.
38 MANTENIMIENTO / SOLUCIN DE PROBLEMAS
MANTENIMIENTO
PRECAUCIN
yyPrimero asegrese de apagar la energa y de desconectar el cable de alimentacin y todos los
dems cables.
yyCuando no se utilice el televisor durante mucho tiempo, desconecte el cable de alimentacin
de la toma de la pared para evitar posibles daos por descargas o sobrecargas de energa.
PRECAUCIN
yyNo ejerza presin, refriegue ni golpee la superficie con las uas o un objeto punzante, dado
que puede rayar la pantalla y producir distorsiones en la imagen.
yyNo utilice sustancias qumicas (como ceras, bencina, alcohol, tner, insecticidas, desodorantes de
ambientes o lubricantes) dado que pueden daar el acabado de la pantalla y causar decoloracin.
yyNo roce lquido sobre la superficie. Si entra agua en el televisor, puede ocasionar incendios,
descargas elctricas o mal funcionamiento.
ESPAOL
ENG
Cable de alimentacin
Quite con regularidad el polvo o la tierra acumulados en el cable de alimentacin.
SOLUCIN DE PROBLEMAS
Problema Solucin
yyCompruebe el sensor del control remoto en el producto e intntelo de nuevo.
No se puede controlar el
yyCompruebe que no haya ningn obstculo entre el producto y el control remoto.
televisor con el control
yyCompruebe que las bateras sigan funcionando y estn instaladas como
remoto.
corresponde ( con , con ).
No se muestra ninguna yyCompruebe si el producto est encendido.
imagen ni se emite yyCompruebe si el cable de alimentacin est conectado a la toma de la pared.
sonido. yyConecte otros productos para comprobar si hay un problema con la toma de la pared.
yyCompruebe la configuracin del control de energa. Es posible que el suministro
elctrico se interrumpa.
El televisor se apaga de yyCompruebe si la funcin de Hora de Apagado / Temporizador est activada en la
repente. configuracin de HORA.
yySi no hay seal mientras el televisor est encendido, este se apagar
automticamente despus de 15 minutos de inactividad.
NOTE
ENG
Some video codecs listed in the manual may not be
supported, depending on the region (country).
POR
Alguns codecs de vdeo listados no manual podem no
ser suportados, dependendo da regio (pas).
POL
Niektre kodeki wideo wymienione w instrukcji mog
nie by obsugiwane, w zalenoci od regionu (kraju).
SPA
Algunos cdecs de vdeo que figuran en el manual
pueden no ser compatibles, dependiendo de la regin
(pas).
THA
Los nmeros de modelo y de serie del televisor se
encuentran ubicados en la parte posterior del
aparato. Regstrelos en el siguiente espacio por si
alguna vez necesita recurrir al servicio tcnico.
MODELO
SERIE
MANUAL DEL USUARIO
CONFIGURACIN DE
DISPOSITIVOS
DE CONTROL EXTERNOS
Lea este manual cuidadosamente antes de utilizar el producto y consrvelo
para futuras referencias.
www.lg.com
2 CDIGOS DE TECLA
CDIGOS DE TECLA
ESPAOL
ENG
Cdigo Cdigo
Funcin Nota Funcin Nota
(hexa) (hexa)
00 CH +, PR + Botn R/C 45 Q.menu (Men rpido) Botn R/C
01 CH -, PR - Botn R/C 4C Lista, - (Solo con ATSC) Botn R/C
02 Volumen + Botn R/C 53 List Botn R/C
03 Volumen - Botn R/C 5B Salir Botn R/C
> (Tecla de flecha / Tecla
06 Botn R/C 61 Azul Botn R/C
derecha)
< (Tecla de flecha / Tecla
07 Botn R/C 63 Amarillo Botn R/C
izquierda)
08 Alimentacin Botn R/C 71 Verde Botn R/C
09 Mute Botn R/C 72 Rojo Botn R/C
Relacin / Aspecto de
0B Entrada Botn R/C 79 Botn R/C
pantalla
0E SLEEP Botn R/C 91 AD (Descripcin audio) Botn R/C
0F TV, TV/RAD Botn R/C 7A User Guide Botn R/C
10 - 19 Teclas numricas 0 a 9 Botn R/C 7C Smart / Home Botn R/C
1A Q.View / Flashback Botn R/C 7E SIMPLINK Botn R/C
1E FAV (canal favorito) Botn R/C 8E (adelantar) Botn R/C
20 Texto (teletexto) Botn R/C 8F (rebobinar) Botn R/C
21 T. Opt (opcin teletexto) Botn R/C AA Info Botn R/C
28 Regresar (ATRS) Botn R/C AB Gua de programacin Botn R/C
30 Modo AV (Audio/Video) Botn R/C B0 (Reproducir) Botn R/C
39 Caption/Subttulo Botn R/C B1 (detener / Live TV) Botn R/C
(congelar/reproduccin
(tecla de flecha/ cursor
40 Botn R/C BA en cmara lenta/ Botn R/C
hacia arriba)
pausa)
V (tecla de flecha/ cursor
41 Botn R/C BD (GRABAR) Botn R/C
hacia abajo)
42 Mis apls. Botn R/C DC 3D Botn R/C
43 Men / Configuracin Botn R/C 9F App (aplicacin)/* Botn R/C
44 OK / Enter Botn R/C
* El cdigo de tecla 4C (0x4C) est disponible en los modelos ATSC/ISDB que utilizan canal mayor/menor.
(Para los modelos de Corea del Sur, Japn, Amrica del Norte, Amrica Latina excepto Colombia)
CONFIGURACIN DE DISPOSITIVOS DE CONTROL EXTERNOS 3
CONFIGURACIN DE DISPOSITIVOS DE
ESPAOL
ENG
CONTROL EXTERNOS
Es posible que la imagen que se muestra no sea exactamente igual a su TV.
Nota: El tipo de puerto de control del TV puede variar segn la serie de los modelos.
* Tenga en cuenta que no todos los modelos admiten este tipo de conectividad.
* No se suministra el cable.
USB IN
(PC) (TV)
(PC) (TV)
Puede adquirirse en tiendas de computadoras que venden accesorios para profesionales de soporte de TI.
1
SERVICE ONLY
(PC) (TV)
2
1
3
(PC) (TV)
RS-232C IN
(CONTROL & SERVICE)
2
RS-232C IN
(CONTROL & SERVICE)
IN IN
4 CONFIGURACIN DE DISPOSITIVOS DE CONTROL EXTERNOS
(PC) (TV)
USB USB
(PC) (TV)
RS-232C con cable RS-232C (existente)
ESPAOL
RS-232C IN
Tipo de adaptador 3.5 mm Stereo
ENG
(PC)
Para realizar la conexin entre la PC y el TV, que se especifica en el IN
RS-232C (TV)
manual, debe comprar el cable de
(CONTROL & SERVICE)
(PC)
conector 3.5 mm Stereo a RS-232. (TV)
* Para otros modelos, conecte al puerto USB.
ONLY ONLY
3
(PC) 1
(TV)
SERVICE
3
(PC) (TV)
SERVICE
2
2
-- Esta conexin solo se puede utilizar con los siguientes modelos: 55/47/39LN5450-UA,
55/50/47/42LN5400-UA, 42/39/32LN5300-UA, y 37/32LN530B-UA.
1
3
(PC) 3
1 (TV)
RS-232C IN
(PC) 2
(CONTROL & SERVICE)
(TV)
RS-232C IN
(CONTROL & SERVICE)
2
-- Esta conexin solo se puede utilizar con los siguientes modelos: 42/50PN4500-UA, 50/60PN5300-UF,
50/60PN6500-UA y 60PN6550-UA.
Computadora del cliente Configuraciones de RS-232C
Configuraciones de 3 cables (no estndar)
1 5 PC TV
RS-232C IN
RXD
(CONTROL & SERVICE) 2 2 TXD
RS-232C IN
TXD
(CONTROL & SERVICE) 3 1 RXD
GND 5 3 GND
6 9 OR
RS-232C RXD 3 2 TXD
(Puerto serie)
TXD 2 1 RXD
GND 5 3 GND
D-Sub 9 3.5 mm
Stereo
ID del televisor
Para seleccionar el nmero de ID, consulte "Asignacin de datos reales" en la pgina 6.
Parmetros de comunicacin
ESPAOL
ENG
Velocidad en baudios: 9600 bps (UART) Bit de detencin: 1 bit
Longitud de datos: 8 bits Cdigo de comunicacin: cdigo ASCII
Paridad: ninguna Utilice un cable cruzado (reverso).
DATOS DATOS
COMANDO1 COMANDO2 COMANDO1 COMANDO2
(Hexadecimal) (Hexadecimal)
01. Apagado k a 00 13. Balance k t 00 a 64
02. Relacin (Consulte la 14. Temp
k c x u 00 a 64
de aspecto pg.7) color
15. ISM
03. Silencio (Consulte la Mtodo (solo (Consulte la
k d j p
de pantalla pg.7) televisores pg.8)
plasma)
04. Silencio 16. Ahorro de
k e 00 a 01 j q 00 a 05
de volumen energa
17.
05. Control (Consulte la
k f 00 a 64 Comandos de m a
de volumen pg.9)
sintonizacin
18. Agr/Borr m b 00 a 01
(Agregar/
06. Contraste k g 00 a 64
Borrar) canal
(Programa)
Cdigo de
07. Brillo k h 00 a 64 19. Tecla m c
tecla
20. Luz de m g 00 a 64
pantalla de
08. Color k i 00 a 64 control
Luz del panel
de control
21. Seleccin x b (Consulte la
09. Tinte k j 00 a 64 de entrada pg.10)
(principal)
22. 3D x t (Consulte la
10. Nitidez k k 00 a 32 (Solo pg.11)
modelos 3D)
23. 3D x v (Consulte la
11. Seleccin extendido pg.11)
k l 00 a 01
de OSD (solo modelos
3D)
12. Control
remoto
k m 00 a 01
Modo de
bloqueo
* Nota: durante las operaciones de USB tales como Dvix o EMF, todos los comandos, excepto
Alimentacin (ka) y Tecla (mc) no se ejecutan y se reconocen como NG.
6 CONFIGURACIN DE DISPOSITIVOS DE CONTROL EXTERNOS
Protocolo de transmisin/recepcin
ESPAOL
ENG
Transmisin
[Comando1][Comando2][ ][ID del televisor][ ][Datos][Cr]
Reconocimiento de aceptacin
[Comando2][ ][ID del televisor][ ][Aceptar][Datos][x]
* El televisor transmite mensajes de ACK (confirmacin) de acuerdo con este formato cuando recibe datos
normales. En este momento, si los datos se encuentran en modo de lectura, indica los datos de estado
actuales. Si los datos se encuentran en modo de escritura, devuelve los datos de la PC.
Reconocimiento de error
[Comando2][ ][ID del televisor][ ][NG][Datos][x]
* El televisor transmite mensajes de ACK (confirmacin) de acuerdo con este formato cuando recibe datos
anormales desde funciones no viables o errores de comunicacin.
ESPAOL
ENG
01. Alimentacin (comando: k a) 03. Silencio de pantalla (comando: k d)
Para controlar el apagado del equipo. Para activar o desactivar el silencio de la pantalla.
Transmisin [k][a][ ][ID del televisor][ ][Dato][Cr] Transmisin [k][d][ ][ID del televisor][ ][Dato][Cr]
Datos 00 : apagado Data 00 : silenciador de pantalla apagado (imagen
encendida) Silenciador de salida de video
Confirmacin [a][ ][ID del televisor][ ][OK/NG]
apagado
[Dato][x] 01 : silenciador de pantalla encendido (imagen
apagada)
Para mostrar Encender. (Funciona solo si el TV
10 : silenciador de salida de video encendido
est encendido)
Confirmacin [d][ ][ID del televisor][ ][OK/NG]
Transmisin [k][a][ ][ID del televisor][ ][FF][Cr]
[Dato][x]
Confirmacin [a][ ][ID del televisor][ ][OK/NG]
[Dato][x] * Si solo se encuentra activado el silencio de salida
de video, el televisor mostrar la visualizacin en
* De igual manera, si otras funciones transmiten pantalla (OSD). Pero si est activado el silencio
datos FF de acuerdo con este formato, la de la pantalla, el televisor no mostrar dicha
retroalimentacin de reconocimiento presenta el visualizacin (OSD).
estado de cada funcin.
Tambin puede ajustar el brillo en el men IMAGEN. Confirmacin [m][ ][ID del televisor][ ][OK/NG]
Transmisin [k][h][ ][ID del televisor][ ][Dato][Cr] [Dato][x]
ESPAOL
00 : apagado ID del televisor = todo = 00
01 : mnimo
ENG
Dato 00 y 01 = datos de canales 1000 = 03 E8
02 : medio Dato 02 = TV digital satelital = 40
03 : mximo Resultado = ma 00 03 E8 40
04 : automtico
05 : pantalla apagada Confirmacin [a][ ][ID del televisor][ ][OK][Dato 00]
* (segn el modelo) [Dato 01][Dato 02][x][a][ ][ID del televisor][ ][NG]
Confirmacin [q][ ][ID del televisor][ ][OK/NG] [Data 00][x]
[Dato][x] Para los modelos de Corea del Sur, Amrica del
Norte, Amrica Latina excepto Colombia.
Para sintonizar los canales en el siguiente nmero
17. Comando de sintonizacin (comando: m a) fsico/mayor/menor.
* Segn el modelo y la seal, este comando podr Transmisin [m][a][ ][0][ ][Dato00][ ][Dato01]
funcionar de un modo diferente. [ ][Dato02][ ][Dato03][ ][Dato04][ ][Dato05][Cr]
Para los modelos de Europa, Medio Oriente,
Los canales digitales poseen un nmero de canal
Colombia, Asia excepto Corea del Sur y Japn fsico, mayor y menor. El nmero fsico es el nmero
Seleccione el canal de los siguientes nmeros de canal digital real, el mayor es el nmero al cual
fsicos. el canal se debe asignar y el menor es el subcanal.
Transmisin [m][a][ ][ID del televisor][ ][Dato 00] Como el sintonizador ATSC asigna automticamente
el canal al nmero mayor/menor, cuando se enva
[ ][Dato 01] [ ][Dato 02][Cr]
un comando en modo Digital, no es necesario
especificar el nmero fsico.
* Terrestre anloga/por cable
* Terrestre anloga/por cable
[Dato 00][Dato 01] Channel Data
Dato 00 : dato de canal alto Dato 00 : nmero de canal fsico
Dato 01 : dato de canal bajo - terrestre (ATV) : 02~45 (decimal: 2 ~ 69)
- 00 00 ~ 00 C7 (decimal : 0 ~ 199) - por cable (CATV) : 01, 0E~7D (decimal : 1,
14~125)
Dato 02 : fuente de entrada (anloga)
- 00 : TV terrestre (ATV) Dato 01 y 04: nmero de canal mayor/menor
- 80 : TV por cable (CATV) Dato 01 y 02: xx (no importa)
Dato 03 y 04: xx (no importa)
* Terrestre digital/por cable/satelital
Dato 05: fuente de entrada (anloga)
[Dato 00][Dato 01]: datos de canales
- 00: TV terrestre (ATV)
Dato 00 : dato de canal alto
- 01: TV por cable (CATV)
Dato 01 : dato de canal bajo
- 00 00 ~ 27 0F (decimal: 0 ~ 9999) * Terrestre digital/por cable
1. Sintonice el canal de cable anlogo (NTSC) 35. Confirmacin [a][ ][ID del televisor][ ][OK][Dato 00]
ENG
ESPAOL
00 : DTV 01 : CADTV
ENG
02 : DTV satelital 10 : ATV Confirmacin [t][ ][ID del televisor][ ][OK][Dato00]
ISDB-BS (Japn) [Dato01][Dato02][Dato03][x]
03 : ISDB-CS1 (Japn) [t][ ][ID del televisor][ ][NG][Dato00][x]
04 : ISDB-CS2 (Japn)
11 : CATV